RISH Multi 12S...18S Analog - Digital multimeters
|
|
- Brendan Johns
- 6 years ago
- Views:
Transcription
1 RISH Multi S...8S Analog - Digital multimeters Data Sheet Analog - Digital multimeter CAT-I Page of 7 ersion: //II// C
2 Application It is Analog Digital Multimeter which measures,, +,requency, ma, ma (+), Resistance, continuity, Diode, arad, current measurement. Product eatures Automatic Terminal Blocking System (ABS) The automatic Terminal blocking system prevents incorrect connection of the test leads and incorrect selection of. This reduces danger to the user, the meter and the system to a remarkable extent. Interface And Software RISH com The multimeters are fitted with a serial RS- C interface via which values can be transmitted to a PC. These values, electrically isolated, are transmitted to the attachable interface adaptor with infrared light through the case* MIN/MAX alue Storage In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated and stored. Indication Of Negative alues On The Analog Scale When measuring quantities, also negative values are shown on the analog scale so that variations of value can be observed at the zero point. Indication Of Negative alues On The Analog Scale The measuring principle employed permits the measurement of the root-mean-square value (TRMS) of quantities and mixed quantities ( and ) regardless of the waveform. Automatic Data Hold* The DATA HOLD makes it possible to hold the digitally displayed measured value. According to a patented method, it is ensured that no freak value but the actual measured value is held in the case of rapid changes in measured quantities. The held measured value appears on the digital display. The actual measured value continues to be shown on the analog scale. Autoranging / Manual Range Selection The measured values are selected with rotary switch. The is automatically matched to value. The can also be selected manually via the AUTO/MAN push button. Continuity Test This permits testing for short circuit and open circuit. In addition to the display, a facility of sound signal is available. Warning A sound signal indication violation of the overload limits. Protective holster for rough duty A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop. The rubber material makes for the meter to stand firmly even on vibrating surface. Top model RISH multi 8S The top model Rish multi 8S features a / digit display ( digits)as well as the following additional s : Event counter, measurement of the duration of the event, time counter (stop watch), data compare,db measurment, wide-range capacitance measurement. Calibration RISH multi is automatically calibrated with respect to luke / Wavetek 9. Automatic calibration is done through a developed calibration software with RS connection to the multimeter. Every multimeter is provided with the Test Certificate which is traceable to National / International standards. All the meters can be recalibrated at the Rishabh Instruments. Temperature Measurement It is possible to use all models of RISH multi series, in direct connection of temperature sensor Pt / Pt. The meters automatically detects the type of sensors connected to it & displays directly measured temperature. Signalling in the case of a blown fuse The display USE points to a blown fuse. Power economizing circuit The meter disconnects automatically when value remains unchanged for about minutes and no operating control was operated during this time. The disconnection facility can be disabled. * Protected by patent rights Page of 7 ersion: //II// C
3 Specifications RISH multi S... 6S Meas. A A A A. m.m A. ma. ma. ma. A. A. ma. ma. ma. A Measuring range RISHMulti S S S S 6S ). A ). A. ma. ma. A 6A 6A Resolution m m m m m m m m m na A A A ma ma A A A ma ma ma A A ma Input impedance > G // < p > G // < p M M M M M M M M M M M M // < p // < p // < p // < p // < p // < p // < p // < p // < p // < p // < p // < p oltage drop. approx. No-load voltage S S S S 6S ) ) Inherent deviation of the digital display + (... of meas. val. +...digits) for reference condition.7 + (... D).7 + (> D).7 + (> D).7 + (> D) S S S / S/6S m. + (> D). + (> D) m m m. + (> D) A m m 6 m (< D). + (> D) m m. + (> D). + (> D) 7) 7) /7m 7 m m. + (> D) m m. + (> D).6 A. + (> D) /7m 7 m. + (> D) 7) 7) m. + (> D).6 A m. + (> D). + (> D) A min 7 m.7 + (> D) ) capacity value duration Measuring A A A A... k. k. k. M. M. m m k k m max.. max.. max.. Discharge resistance U max ) ) min. n. n.. p p n n k k k k ) / min Sensor min min.. k. k. k )...k: + D 9)...k:+ D/k < k: < k: < k: C C C C C. C. C. C. C Pt Pt Kelvin + D. + Kelvin + D. + min C TRMS measurement ) Direct display with clip-on transformer : ) At C... + C ) With zero setting; w/o zero setting + digits 6) With zero setting; w/o zero setting + digits 7) RISH multi S (w/o 6 A fuse!) : 6A, A for min; RISH multi S... 6S: A for min, 6A for s Range : U =.... E rms rms : U =... E rms rms : U E = rms... rms 9) On the range rectangular signal positive at one end..., f = const., not 6.8 or integer multiple. Without sensor Page of 7 ersion: //II// C
4 Specifications RISH multi 8S Meas. db Measuring range. m.... Resolution µ µ m m m > G M M M M Input impedence M // < p M // < p M // < p M // < p M // < p Inherent error of the digital display + (... of rdg.+... digits) at reference conditions. + ; (> 6 Digit). + (> Digit ). + (> Digit ). + (> Digit ). + (> Digit ) ) See table below as at +. db capacity value RMS ) duration Meas. db oltage drop. approx. ma A. µa. ma. ma. ma. A. A na m na m µa m µa m µa m ma m m m m m m m (> Digit). + (> Digit). + (> Digit). + (> Digit). + (> Digit). + (> Digit).6 A ) A min ma A No-load voltage Short circuit current.. k. k. k. M. M. - m m k m max.. max.. max. ma max. µa max. µa max. µa max.. µa max.. µa. + 6; RMS min Discharge resist. U max. n. n. n. µ. µ. µ µ µ p p p n n n µ µ. M. M k k k. k. k. k. + 8; ; RMS min 6) f min db ranges Display span at reference voltage Measuring ranges U =.77 m Pt Pt.. k. k. k db db - 8 db... + db - 8 db... + db + db... + db + db db Display (db) = lg U () /.77 x Display span at reference voltage U () ref - db... + db -6 db... + db - 8 db db - db db - db... + db Display (db) = lg U x() / U ref () 7) < k;. +. Kelvin Kelvin +. + TRMS measurement values < digit (< digit for m) will be supressed ) At With zero adjuster; without zero adjuster ) At a resolution of. db ) 6 A for s 6) Lowest measurable frequency with a measuring signal which is symmetrical to zero 7) Range : U e = eff/rms... eff/rms : U e = eff/rms... eff/rms : U = e eff/rms... Without sensor < k; < k rms sine eff/rms min. Page of 7 ersion: //II// C
5 Reference conditionsmeasuring current with diode test and / or continuity test 8S Ambient temperature +Co + K Relative humidity... requency of the... 6 measured Waveform of the Sinusoidal measured Battery voltage 8 +. Measuring voltage with resistance measurement S... 6S Measuring voltage with resistance measurement 8S U X U X M M k k D M M k k D oltage Ux across the resistance Rx to be measured as a of measuring range and display. oltage Ux across the resistance Rx to be measured as a of measuring range and display. quantities and variations for S... 6S Temperature requency of Waveform of C range Measured /... + and <... < > 6... >... k > k... k... <... < > 6... k... <... < > 6... k Crest factor C... >... / m ) µ A... ma A / (6) A A ) k... M M ) n... µ µ A ), A ) ariation + (... of meas. val digits) S... S S 6S K D of rdg. + of rdg. The permissible crest factor C of the to be measured is a of the displayed value : oltage measurement C Current measurement Measuring current with diode test and / or continuity test S... 6S. ma l x range Measured / D ariation S... 6S... Measuring current with diode test and / or continuity test 8S......,, Ux l ma x U x Measuring current Ix as a of the displayed voltage Ux on the device under test. Measuring current Ix as a of the displayed voltage Ux on the device under test. Battery voltage Relative humidity DATA MIN / MAX )... < 7.9 > days Meter off A A / / ºC k... M n, µ A, A + D + D + D + 6 D + D + D + D + D + D x Intrinsic error + D + D With temperature; Error data is per K change in temperature. With frequency; Error data is valid from a display of digits. With zero setting With unknown waveform (crest factor C > ), the measurement must be made with manual range selection. Except for waveform rom the time the symbol appears. Page of 7 ersion: //II// C
6 quantities and variations for 8S Temperature requency of Waveform of C range and < 6... < >...< >... < > 6... >... k > k... k... <... < > 6... k... < > 6... k Crest factor C... >... Measured /, µa / ma ma... A µa... ma A / A ma k... M M n... µ µ m... A ), A ) ) ariation + (... of meas. val digits) Kelvin + D of rdg. + of rdg. The permissible crest factor C of the to be measured is a of the displayed value : oltage measurement C Current measurement D Display LCD field (6 mm x mm) with analog indication and digital display and with annunciators for unit of measurement, and various special s. Analog Indication LCD scale with pointer Scale length mm on and A ; 7 mm on all other ranges Scaling + + with scale divisions on, with scale divisions on all other ranges Polarity indication With automatic reversal Overrange indication By triangle Sampling rate readings/s, On readings/s Digital Display/ Rish multi S 6S, height of numerals 7 segment numerals / mm Rish multi 8S: 7-segment numerals/ mm Number of counts Rish multi S 6S, ¾ digit counts Rish multi 8S: ¾ digit counts Overange display "OL" is shown Polarity display "-" sign is shown, When positive pole to Sampling rate readings/s, On and C: reading/s Display RISH multi S... 6S 6 ON MAN DATA MIN MAX. + k ma k M n µ + 7 Battery voltage range Measured / )... < 7.9 > A A n... µ ariation + 6 D + D + D + ( of rdg.+ D) + D + D + 6 D + D Display RISH multi 8S MAN DATA MIN MAX ON EENTS k µma k M ZERO. ºC n ON 7 Relative humidity DATA MIN / MAX 7 days Meter off, db, A,,,, db, A,,, db, A,,, x inherent deviation + D + D + D + D With zero setting With temperature; Error data is per K change in temperature. With frequency; Error data is valid from a display of of the. With unknown waveform (crest factor C > ), the measurement must be made with manual range selection. Except for waveform rom the time the symbol appears. 9 8 Display with low battery voltage Display with sound signal on Symbol for CONTINUOUSLY ON Digital display with indication of decimal point and polarity Display with manual range selection as well as with data and MIN/MAX hold 6 Display of the selected 7 Display of the unit of measurement 8 Display with overrange 9 Pointer for analog indication Scale for analog indication Indication that negative analog range is exceeded Display of the unit C when measuring temperature Display with time counter switched on Page 6 of 7 ersion: //II// C
7 MAN DATA MIN MAX O Applied rules and standards IEC 6-: DIN EN 6 part DE - DIN 7 IS 87 EN 66: EN 66: DI/DE DIN EN 69 DIN DE 7 part Operating controls S... 8S RISH multi SI Esc RISH multi 6S TRMS T on-.6 ON k µma k M n µ + fused C ma ma A A CAT II/6 CAT III ma RISHABH A ON/O RISHABH + Safety requirements for electrical equipment for measurement, control and laboratory use. Digital measuring instruments Generic emission standard; Residential, commercial and light industry. Generic immunity standard; residential, commercial and light industry. Reliability of measuring and control equipment. Test equipment and test procedures -Degrees of protection provided by enclosures (IP Code). 6 Option storage adapter RISHmulti SI Analog-to-digital multimeter RISHmulti S LC display ON/O push-button Push-button for data hold and MIN/MAX storage Push-button for manual range selection Multi- push-button 6 Switch for measurement s 7 Connection sockets with automatic blocking system Environmental conditions Working temperature range Storage temperature range Climatic class Altitude above sea level Warranty RISH multi S... 6S - C... + C RISH multi 8S - C... + C - C C (excl. batteries) RISH multi S... 6S z/-//7/7 with reference to DI/DE RISH multi 8S, z/-//7/7 with reference to DI/DE up to m year against defects in materials and workmanship & calibration from the date of purchase. Mechanical configuration Protection type or meters; IP, for connection sockets: IP Dimensions 8 mm x 9 mm x mm Weight. kg, approx., incl. battery Scope of delivery multimeter Probe Set copy of operating instructions test certificate rubber holster with tilt stand and carrying strap warranty card set of extra fuses. 7 RISHABH INSTRUMENTS PT.LTD. -, MI, Satpur, Nashik- 7,India. Tel.: +9 6, ax : India :- marketing@rishabh.co.in International :- exp.marketing@rishabh.co.in Page 7 of 7 ersion: //II// C
GAMMA 10 DIGITAL MULTIMETER
Gamma 10 www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel
More informationGAMMA 12 DIGITAL MULTIMETER
Gamma 12 www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel
More informationTechnical Data Sheet. Gamma 12. Gamma 12
Technical Data Sheet Gamma Gamma Gamma It is Analog Digital Multimeter which measures VAC, VDC, VAC+DC,Frequency, ma DC, ma (AC+DC), Resistance, continuity, Diode, Farad, AC current measurement. Special
More informationData Sheet. Analog - Digital Multimeter. RISH Multi RISH Multi Analog-Digital Multimeter. Page 1 of 6. Rishabh Instruments
Data Sheet Analog-Digital Multimeter Rishabh Instruments Page 1 of 6 1 / 05 / I / 0711 / B MIN/MAX alue Storage : In addition to the display of the actual measured value, the minimum or maximum value can
More informationData Sheet. RISH Max-14 Analog-Digital Multimeter. RISH Max-14 Analog-Digital Multimeter. Page 1 of 5. Rishabh Instruments 1 / 05 / IX / 1210 / B
Data Sheet RISH Max-14 Page 1 of 5 Input resistance can be selected for voltage measurements. Direct and alternating voltages from 400m... 600. Direct and alternating currents from 40mA... 10A. Resistance
More informationRISH MIT 30 Analog Digital Multimeter with Insulation Resistance Measurement
RISH MIT 30 Analog Digital Multimeter with Insulation Resistance Measurement Data Sheet Analog Digital Multimeter with Insulation resistance www.rishabh.co.in Page 1 of 6 Version: J 28/12/2011 Application
More informationRISH Max-12 and 14 Analog-Digital Multimeter. Data Sheet. RISH Max-12 and 14 Analog-Digital Multimeter. Rishabh Instruments
Data Sheet RISH Max-12 and 14 Direct and alternating currents from 10 A... 10.00A. Diode measurement and continuity testing. MIN, MAX and Hold measurement storage. Application RISH max digital multimeters
More informationAnalog Digital Multimeter with Insulation Resistance Measurement
RISH MIT 30 Product Features: RISH MIT 30 is Analog Digital Multimeter with insulation resistance measurement, which measures VAC, VDC, VAC+DC,Frequency, ma DC, ma AC+DC,Resistance, continuity, Diode,
More informationMETRAHIT WORLD. International TRMS Multimeter /2.16. Features
3-349-527-03 8/2.16 Resolution: 100 μ, 100 mω, 10 μ, 10 pf, 0.1 Hz Precision temperature measurement ( 50... +800 C) Frequency and duty cycle measurement at 2 to 14 signals up to 1 MHz Capacitance measurement
More informationGAMMA 20 DIGITAL MULTIMETER
Gamma 20 www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel
More informationTechnical Data Sheet. Delta 1000/300
Technical Data Sheet Delta 1000/300 Delta 1000/300 measures important electrical parameters like Current (TRMS), Current, Voltage(TRMS), and Voltage. It also features Capacitance, Ohm & Continuity, frequency,
More informationMETRA 22 26S/M Analog-Digital Multimeters with Signal Generator
3-349-026-03 2/8.99 METRAHit 22/23/24/25/26 Precision multimeter (V, db, Ω, F, Hz, C/ F) Resolution: 10 µv, 10 mω Integrated quartz movement for MIN-MAX recording with reference to real-time Signal generator
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-340 MODEL: 61-342 Multimeter Service Information The Service Information provides the following information: Precautions and safety information Specifications
More informationSUBJECT TO CHANGE WITHOUT NOTICE
www.sifamtinsley.co.uk DATASHEET Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters ijunior / JUNIOR Current Transformers Analogue Panel Meters
More informationLaboratory for Fundamentals of Electrical Engineering (Labor Grundlagen der Elektrotechnik) Equipment Manuals for use in laboratory for measurement
Laboratory for Fundamentals of Electrical Engineering (Labor Grundlagen der Elektrotechnik) Equipment Manuals for use in laboratory for measurement Gossen, Metrawatt, Camille Bauer METRAHit 15S System
More informationMETRAHIT T-COM Cable Multimeter for Measurements in Symmetrical Copper Cable Networks
3-349-379-03 4/11.08 Insulation resistance measurement (test voltage: 100 ) with simultaneous recognition of interference voltage as well as polarity reversal for diode testing Cable symmetry testing with
More informationMETRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
More informationDigital-Multimeter UNIGOR 380, 390
Digital-Multimeter UNIGOR 380, 390 Precision multimeter (V, db, A, Ω, F, Hz, C) UNIGOR 390: Power meter W, Var, VA, Wh, cos ϕ, 128 kb data memory Triple display for simultaneous indication of 3 measurement
More informationOPERATOR S INSTRUCTION MANUAL
OPERATOR S INSTRUCTION MANUAL AUTO-RANGE DUAL DISPLAY CONFORMED IEC1010 DIGITAL MULTIMETER CONTENTS PAGE SAFETY INFORMATION..... DESCRIPTION.. OPERATING INSTRUCTION.. SPECIFICATIONS.... ACCESSORIES. BATTERY
More informationDVM98. True RMS Digital Multimeter. 1 Safety information. 1.1 Preliminary. 1.2 During use
True RMS Digital Multimeter DVM98 1 Safety information This multimeter has been designed according to IEC - 1010 concerning electronic measuring instruments with an overvoltage category (CAT II) and pollution
More informationUSER'S MANUAL DMR-6700
USER'S MANUAL Multimeter True RMS DMR-6700 CIRCUIT-TEST ELECTRONICS www.circuittest.com Introduction This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic),
More informationMETRAClip85 and 86 Clamp Multimeters
3-349-794-03 1/8.14 Current and frequency measurement via clamp meter: 600 A AC TRMS and 900 A DC (automatic or manual switching) Multimeter functions via connector sockets: V (AC TRMS and DC) up to 1000
More informationDigital-Multimeter UNIGOR 380, UNIGOR 390
Digital-Multimeter UNIGOR 380, UNIGOR 390 Precision multimeters (V, db, A, Ω, F, Hz, C) UNIGOR 390: Power meter W, Var, VA, Wh, cos ϕ, 128 kb data memory Optimum measurement information due to triple display
More informationModel ST Instruction Manual. True RMS Autoranging Digital Multimeter. reedinstruments. www. com
Model ST-9933 True RMS Autoranging Digital Multimeter Instruction Manual reedinstruments com Table of Contents Safety... 3 Features... 4 Specifications...4-8 Technical...4-5 Accuracy...5-8 Display Description...
More informationOperating Instructions METRA HIT 16I/L/T. Analog Digital Multimeter with Insulation Measurement /5.06
Operating Instructions METRA HIT 16I/L/T Analog Digital Multimeter with Insulation Measurement 3-348-892-02 9/5.06 METRA HIT 16I/L METRA HIT 16T (1) (5/5a) (2) (3/3a) (4/4a) (5/5b) (2) (3) (6) (8) (8)
More informationDIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A OPERATION MANUAL
DIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A OPERATION MANUAL DIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A TABLE OF CONTENTS TITLE PAGE Safety Information Safety Symbols... 1 Meter Description...
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL:
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-352 The Service Information provides the following information: Precautions and safety information Specifications Basic maintenance (cleaning, replacing
More informationAC/DC DIGITAL CLAMP METER OPERATION MANUAL
AC/DC DIGITAL CLAMP METER OPERATION MANUAL HYS005661 A0 ACCESSORIES 6. ACCESSORIES 1) Test Leads: Electric Ratings 1000V 10A 1 pair (set) 2) Operating Manual 1 copy 3) 1.5V AAA Battery 3 piece - - 55 -
More informationThank you again for choosing AstroAI, if you have any questions or concerns regarding your product, please contact us at
ASTROAI USER MANUAL DT132A 4000 Count Auto-Ranging Multimeter Thank you for purchasing the AstroAI DT132A 4000 Count Auto-Ranging Multimeter. It is a 3 ¾ digit, 3999 counts, auto-ranging digital multimeter.
More informationMETRAHIT ISO TRMS Multimeter with Insulation Measurement
3-349-415-03 3/10.08 Insulation resistance measurement with interference voltage detection, test voltages: 50, 100, 250, 500, 1000 Multimeter with diverse functions (,, F, Hz) TRMS measurements: TRMS AC
More informationTechnical Datasheet. Delta Power 1000A / 400A AC-DC
Delta 1000A / 400A AC-DC Technical Datasheet Delta 1000A/ 400A AC-DC is specially designed for Measurement of AC-DC POWER and quality parameters. Up to 49th Individual Harmonics Non contact voltage detection.
More informationDigital Multimeter with Backlight
MODEL: D03126 Digital Multimeter with Backlight 1 CONTENTS Page Number Description 3 Important Safety Information 3 What s Included? 4 Overview 4 Front Panel Description 5 General Specification 5 DC Voltage
More informationEM420A/420B DIGITAL MULTIMETER OWNERS MANUAL Read this owners manual thoroughly before use
http://www.all-sun.com EM420A/420B DIGITAL MULTIMETER OWNERS MANUAL V Read this owners manual thoroughly before use WARRANTY This instrument is warranted to be free from defects in material and workmanship
More informationMS2030 CAT III 600 V A V AUTO RS232
MS2030 AC Digital Clamp Meter User s Manual CAT III 600 V AUTO RS232 A V CONTENTS 1.Introduction...1 2.Safety Information...1 2.1 Precautions...1 2.2 Safety Symbols...3 3. Description...4 3.1 Front Panel...4
More informationDVM1190 DIGITAL MULTIMETER
DIGITAL MULTIMETER 1. Introduction Thank you for buying the. This digital multimeter has a large LCD, a data-hold function and a backlight. The device uses a very practical safety mechanism that keeps
More informationTechnical Data Sheet. Zeta 20
Technical Data Sheet Zeta 20 Application Zeta 20 is the digital Insulation and continuity Tester is suitable for following Measurement of the insulation resistance on electrically dead equipment and systems
More information1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation
More informationMW3105 DIGITAL CLAMP MULTIMETER
MW3105 DIGITAL CLAMP MULTIMETER 2 M MW3105 A 01 INTRODUCTION 1.1 - Unpacking and inspection Upon removing your new Digital Clamp Meter from its packing, you should have the following items: 1. Digital
More informationNOTE: Fully read and understand this manual before using this Digital Multimeter.
ASTROAI USER MANUAL AUTO RANGING DIGITAL CLAMP METER Thank you for purchasing the Auto Ranging Digital Clamp Meter from AstroAI. The AstroAI Auto Ranging Digital Clamp Meter is designed to be safely and
More information1. SAFETY 1.1. SAFETY INFORMATION 1.2. SAFETY SYMBOLS
To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
More informationDawson DDM190. Digital Multimeter User s Manual
Dawson DDM190 Digital Multimeter User s Manual TABLE OF CONTENTS LIMITED WARRANTY AND LIMITATION OF LIABILITY... 3 Out of the Box... 3 Accessories.. Error! Bookmark not defined. Safety Information... 7
More informationRM Analogue Meters With Moving - Iron Movement. Analogue Digital Multimeter (User Manual)
nalogue Meters With Moving Iron Movement RM12... 16 Ziegler Instruments Order No. RM 12... 16 User ManualE1.R92123214EN nalogue Digital Multimeter (User Manual) www.zieglerinstruments.com 1 15 ON DC C
More informationAPPA 300 Series. The Most User-Friendly High Performance Multimeter
APPA 300 Series The Most User-Friendly High Performance Multimeter Throw Away the Manual... So Easy, So Simple Straight Forward... For basic application, simply to operate these keys... "LIGHT" "BAR" "DIGIT"
More informationBENNING. Service Information MODEL: MM1-1 / MM1-2 / MM1-3
BENNING MODEL: MM1-1 / MM1-2 / MM1-3 Service Information The Service Information provides the following information: Precautions and safety information Specifications Basic maintenance (cleaning, replacing
More informationFluke and
Fluke 1623-2 and 1625-2 GEO Earth Ground Testers Technical Data The new Fluke 1623-2 and 1625-2 GEO Earth Ground Testers offer data storage and download capabilities via USB port. World class accessories
More informationDawson DDM230C. True RMS Multimeter with Bar Graph Display User s Manual
Dawson DDM230C True RMS Multimeter with Bar Graph Display User s Manual Table of Contents LIMITED WARRANTY AND LIMITATION OF LIABILITY... 3 Out of the Box... 3 Accessories... 4 Safety Information... 4
More informationDIGITAL MULTIMETER 405
DIGITAL MULTIMETER 405 TAKE MEASUREMENT CAREFULLY AND YOU LL SPARE YOUR METER AND YOURSELF, SOME PAIN Nearly every electrical engineer has a hand held digital multimeter (DMM). We sometimes take them for
More informationThe Meter Structure The Figure 2-1 shows the Meter structure.
P/N:110401104496X The Meter Structure The Figure 2-1 shows the Meter structure. 1. USB Terminals 2. LCD Display 3. Functional Buttons 4. Rotary Switch 5. Power adaptor Input Terminals 6. 10A Input Terminal
More informationFluke 83V and 87V Digital Multimeters
Fluke 83V and 87V Digital Multimeters Detailed Specifications For all detailed specifications: is given as ±([% of reading] + [number of least significant digits]) at 18 C to 28 C, with relative humidity
More informationMETRAHit 30M Precision Digital Multimeter
3-348-979-03 5/3.03 Precision multimeter (V, ma, Ω, Hz, C/ F) and data logger 1,200,000 digit display range High resolution for: DC/AC+DC voltage: 100 nv/1 µv DC and AC+DC Current: 100 pa TRMS AC+DC Milliohmmeter
More informationMETRA 28C Calibrator, Multimeter and Milliohmmeter
3-349-098-03 2/8.01 Universal calibrator, simulator and multimeter ma / mv V / C (Pt100/1000, Ni100/1000, type J, L, T, U, K, E, S, R, B and N thermocouples) / 30 2000 Dual mode simultaneous simulation
More information79/26 Series III Multimeter
79/26 Series III Multimeter Instruction Sheet W Read First: Safety Information Never use the meter if the meter or test leads look damaged. Be sure the test leads and switch are in the correct position
More informationMM700. True RMS ENGLISH. INSTRUCTION MANUAL Auto-Ranging. Measurement Technology
INSTRUCTION MANUAL Auto-Ranging Digital Multimeter er True RMS Measurement Technology MM700 DATA & RANGE HOLD LOW IMPEDANCE AUDIBLE CONTINUITY MIN / MAX / RELATIVE TEMPERATURE DIODE TEST CAPACITANCE &
More informationRISHABH 6012 / 6013 / 6015 / 6016
Data logger & View function (up to 32000 readings) Plug and Play USB connectivity with PC 100kHz bandwidth for voltage measurement 1kHz Low Pass Filter mode NO-GO function VAC with 1M impedance 4-20mA/0-20mA
More informationAutoranging Multimeter Extech EX503
User's Guide Autoranging Multimeter Extech EX503 Introduction Congratulations on your purchase of the Extech EX503 Autoranging Multimeter. This meter measures AC/DC Voltage, AC/DC Current, Resistance,
More informationETHOS 5030 TRUE-RMS DIGITAL MULTIMETER OPERATION MANUAL
ETHOS 5030 TRUE-RMS DIGITAL MULTIMETER OPERATION MANUAL 1 1. SAFETY INFORMATION SAFETY SYMBOLS Warning! Dangerous Voltage (Risk of electric shock). Caution! Refer to the user s manual before using this
More informationMETRA HIT 22 26S/M Analog-Digital Multimeters with Signal Generator
3-349-026-03 10/8.06 METRA HIT 22/23/24/25/26 Precision multimeter (V, db, Ω, F, Hz, C/ F, V ) Resolution: 10 μv, 10 mω Integrated quartz movement for MIN-MAX recording with reference to real-time Rectangular
More information1587/1577 Insulation Multimeters
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
More informationModel DIGITAL MULTIMETER
Model 57070 DIGITAL MULTIMETER INSTRUCTION MANUAL SAFETY INFORMATION To ensure safe operation, and in order to exploit to the full the functionality of the meter, please follow the directions in this section
More informationOPERATING INSTRUCTION
OPERATING INSTRUCTION AUTOMOTIVE MULTIMETER MODEL QM1444 the finger guards on the probes. Measuring voltage which exceeds the limits of the multimeter may damage the meter and expose the operator to a
More informationDigital Clamp Meter (TRMS) Model : 2727
Digital Clamp Meter (TRMS) Model : 2727 Instruction Manual 1. SPECIFICATIONS 1.1 General Specifications Display : 3 ¾ digit liquid crystal display (LCD) with a maximum reading of 3999. Polarity : Automatic,
More informationSAFETY PRECAUTIONS: Before use, read the following safety precautions
[1] SAFETY PRECAUTIONS: Before use, read the following safety precautions This instruction manual explains how to use your multimeter CD731, CD751 safely. Before use, please read this manual thoroughly.
More informationMETRA HIT 28C Calibrator, Multimeter and Milliohmmeter
3-349-098-03 3/2.04 Universal calibrator, simulator and multimeter ma / mv V / C (Pt100/1000, Ni100/1000, type J, L, T, U, K, E, S, R, B and N thermocouples) / 30 2000 Ω Dual mode simultaneous simulation
More informationBENNING. CM7 Electrical Tester. Service Information
BENNING CM7 Electrical Tester Service Information TABLE OF CONTENTS Page Introduction 1 Precautions and Safety Information 1 Symbols 1 Safety 2 Specifications 3 General Specification 3 Voltage Specification
More informationProfiScale MULTI Multimeter
1,5 V 9V 200 mv 600 V 200 ma 1/10 A ProfiScale MULTI Multimeter en Operating instructions BURG-WÄCHTER KG Altenhofer Weg 15 58300 Wetter Germany Introduction Want the reassurance of knowing whether current
More informationEUROPE S LARGEST SELECTION OF TEST & MEASUREMENT EQUIPMENT FOR HIRE INLEC.COM. Nationwide Low Call
EUROPE S LARGEST SELECTION OF TEST & MEASUREMENT EQUIPMENT FOR HIRE INLEC.COM Nationwide Low Call 0333 6000 600 WHY BUY WHEN YOU CAN HIRE 3-349-026-03 6/3.03 METRAHit! 22/23/24/25/26 Precision multimeter
More informationOPERATOR S INSTRUCTION MANUAL DIGITAL MULTIMETER
OPERATOR S INSTRUCTION MANUAL DIGITAL MULTIMETER SAFETY INFORMATION This multimeter has been designed according to IEC 1010 concerning electronic measuring instruments with an overvoltage category (CATⅡ)
More informationFluke 1623 and GEO Earth Ground Testers. Technical Data. Stakeless testing
Fluke 1623 and 1625 GEO Earth Ground Testers Technical Data The new Fluke 1623 and 1625 GEO Earth Ground Testers offer an innovative solution, called Stakeless testing, to make your earth ground loop resistance
More informationQUICK SETUP GUIDE SECULIFE HITAM
QUICK SETUP GUIDE SECULIFE HITAM The measurement and testing of measuring equipment in the field of medical technology necessitates absolute reliability and a broad range of applications. The SECULIFE
More informationMM700. INSTRUCTION MANUAL Auto-Ranging Digital Multimeter True RMS
INSTRUCTION MANUAL Auto-Ranging Digital Multimeter True RMS Measurement Technology MM700 DATA & RANGE HOLD LOW IMPEDANCE AUDIBLE CONTINUITY MIN / MAX / RELATIVE TEMPERATURE DIODE TEST CAPACITANCE & FREQUENCY
More informationDIGITAL MULTIMETER OPERATING INSTRUCTIONS MODEL CDM-35. Part No
DIGITAL MULTIMETER MODEL CDM-35 Part No.4500055 OPERATING INSTRUCTIONS 0304 The Meter may be hung on a wall, or supported as shown, depending upon which support is used. The probes may be located as shown,
More informationMETRAHIT X-TRA PRO BASE TRMS Digital Multimeters
3-349-350-03 1/11.05 Digital Hand-Held Multimeter with RMS Measurement V AC TRMS, V AC+DC TRMS, V DC, Hz (V), Hz (A), Ω, V, C/ F (TC) 4½-place display (11,999 digits), with display illumination DKD calibration
More informationInsulation Testers and Earth Ground Testers
Insulation Testers and Earth Ground Testers With a 5000 V MegOhmMeter for industrial-strength insulation testing and a range of compact hand-held instruments, we offer a solution for every troubleshooting
More informationUser Manual Digital Multimeter. model no.: MSR-U1000
User Manual Digital Multimeter model no.: MSR-U1000 This Operating Manual covers information on safety and cautions. Please read the relevant information carefully and observe all the Warnings and Notes
More informationUser s Manual. MiniTec TM Series. Model MN26 (Model MN26T includes temperature probe) Mini Autoranging MultiMeter
User s Manual MiniTec TM Series Model MN26 (Model MN26T includes temperature probe) Mini Autoranging MultiMeter Introduction Congratulations on your purchase of Extech s MN26 Autoranging Multimeter. This
More informationDIGITAL MULTIMETER INSTRUCTION MANUAL
DIGITAL MULTIMETER INSTRUCTION MANUAL 1 CONTENTS CONTENTS 1. SAFETY INFORMATION 1 1.1 PRELIMINARY 1 1.2 DURING USE 2 1.3 SYMBOLS 3 1.4 MAINTENANCE 4 2. DESCRIPTION 5 2.1 NAMES OF COMPONENTS 5 2.2 SWITCH,
More informationAccuracy : ± (0.8% rdg + 1dgt) on all ranges except Ranges : 200mV, 2V, 20V, 200V, 1000V
. SPECIFICATIONS Digital Multimeter Model : 0 Instruction Manual. General Specifications Display : ½ digit liquid crystal display (LCD) with a maximum reading of 999. Polarity : Automatic, (-)negative
More information2000 A AC TRUE RMS DIGITAL CLAMP METER WITH NON-CONTACT EF-DETECTION
An ISO 9001:2008 Company 2000 A AC TRUE RMS DIGITAL CLAMP METER WITH NON-CONTACT EF-DETECTION SPECIAL FEATURES : 2000A AC Clamp-on + Full Multimeter ranges AC True RMS Voltage & Current functions Autocheck
More informationAMM-1022 Digital Multimeter USER`S MANUAL
Digital Multimeter USER`S MANUAL www.tmatlantic.com CONTENTS 1. SAFETY INFORMATION.3 2. DESCRIPTION..6 3. SPECIFICATIONS.8 4. OPERATING INSTRUCTION..11 4.1 Voltage measurement...11 4.2 Current measurement
More informationDawson DDM181. Pocket-Size Autorange Digital Meter User s Manual
Dawson DDM181 Pocket-Size Autorange Digital Meter User s Manual 1 Table of Contents LIMITED WARRANTY AND LIMITATION OF LIABILITY... 3 Out of the Box... 3 Accessories... 4 Important Safety Information...
More informationRISH Ducer E13 Transducer For Ac Current Or Ac Voltage With Different Characteristics
RISH Ducer E13 Transducer For c Current Or c Voltage With Different Characteristics Data Sheet For Measurement of C Current or C Voltage Fig. 1. RISH Ducer E13 clipped onto a top - hat rail. Fig. 2. RISH
More informationEX360 Series USER MANUAL. True RMS Digital Multimeters. EX360 True RMS Digital Multimeter EX363 True RMS DMM with Temperature and µa AC/DC
USER MANUAL True RMS Digital Multimeters EX360 Series EX360 True RMS Digital Multimeter EX363 True RMS DMM with Temperature and µa AC/DC EX365 True RMS DMM with 10A AC/DC Current Additional User Manual
More information30XR-A Professional Digital Multimeter Users Manual
Professional Digital Multimeter Users Manual 99 Washington Street Melrose, MA 076 Fax 78-665-0780 TestEquipmentDepot.com MADE IN TAIWAN PATENTS PENDING www.amprobe.com MIN 5 00 00 0 0 00m 00m 00 0M m M
More informationSECULIFE SR PC Controllable Instrument for Measuring Safety-Relevant Characteristic Values of Electrical Devices /2.
3-349-443-03 3/2.12 Applications Testing for the Electrical Safety of Electrical Medical Devices in Accordance with the German Medical Product Law (MPG) / MDD The test instrument is used for quick and
More information50000 Counts Dual Display Digital Multimeter
50000 Counts Dual Display Digital Multimeter GDM-8245 (50000 Counts) The GDM-8245 is an economical bench-top DMM equipped with a rich set of features. The GDM-8245 has similar functions to the GDM-8246,
More informationCD770 DIGITAL MULTIMETER INSTRUCTION MANUAL
CD770 DIGITAL MULTIMETER INSTRUCTION MANUAL Table of Contents 1 SAFETY PRECAUTIONS Before use, read the following safety precautions.- 1-1 Explanation of Warning Symbols 001 1-2 Warning Messages for Safe
More informationMETRISO. Analog Insulation, Low Resistance and Voltage Measurement Instrument /9.14
3-349-813-3 1/9.14 Insulation measurement per EN 61557-2/VDE 413, part 2 Test voltages: 5 V, 1 V, 25 V, 5 V and 1 V Analog display of measured values and limit values Intelligent filter precise and measurement-dependent
More informationUser's Guide. Extech 800 Series 1000 Amp Clamp Meters with IR Thermometer
User's Guide Extech 800 Series 1000 Amp Clamp Meters with IR Thermometer EX810 AC Clamp meter EX820 True RMS AC Clamp meter EX830 AC/DC True RMS Clamp meter Patented Introduction Congratulations on your
More information3B SCIENTIFIC PHYSICS
3B SCIENTIFIC PHYSICS Digital Multimeter E 1018832 Instruction sheet 12/16 SD/UD 1 probe 1a Finger guards 2 Measurement socket 10 A for current measurement in 10-A (positive) 3 Measurement socket COM (negative)
More informationUser's Guide Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330
User's Guide Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 Introduction Congratulations on your purchase of the Extech EX330 Meter. The EX330 offers AC/DC Voltage, AC/DC Current,
More informationAC/DC CLAMP METER USER S MANUAL
AC/DC CLAMP METER USER S MANUAL CONTENTS PAGE SAFETY INFORMATION SYMBOL EXPLANATION SAFETY PRECAUTIONS 1 1 2 MAINTENANCE 3 GENERAL DESCRIPTION 4 PANEL DESCRIPTION 4 OPERATING INSTRUCTIONS... 7 SPECIFICATIONS
More informationNI 71/72. Multimeter. Manual
35 NI 71/72 Multimeter Manual Warning...................................... Caution.............................................. Safety Alert Symbol : READ and UNDERSTAND all safety alert symbols : in
More informationMETRAHIT WORLD International TRMS Multimeter
Operating Instructions METRAHIT WORLD International TRMS Multimeter 3-349-529-03 10/6.17 1 2 3 4 5 6 7 1 21 8 9 2 3 4 5 20 19 18 17 16 15 14 13 10 11 12 Max. 1000 V! 1 Display (LCD) 2 ON / OFF Light Key
More informationPEN TYPE DIGITAL MULTIMETER OPERATION MANUAL T8211D
PEN TYPE DIGITAL MULTIMETER OPERATION MANUAL T8211D T8211D 1 1. SAFETY INFORMATION BE EXTREMELY CAREFUL IN THE USE OF THIS METER. Improper use of this device can result in electric shock or destroy of
More informationKMD-S04 Multímetro de bolsillo
www.grupotemper.com KMD-S04 Multímetro de bolsillo Table of Contents Title Page Overview ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3 Unpacking Inspection ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 4 Safety Information
More informationMS6231 DIGITAL ENGINE ANALYZER OPERATOR S MANUAL CONTENTS CONTENTS
CONTENTS MS6231 DIGITAL ENGINE ANALYZER OPERATOR S MANUAL CONTENTS 1. SAFETY INFORMATION 1 1.1 PRELIMINARY 2 1.2 DURING USE 3 1.3 SYMBOLS 5 1.4 MAINTENANCE 6 2. DESCRIPTION 8 2.1 NAMES OF COMPONENTS 9
More informationItem ref: UK MTTR01 TRUE RMS DIGITAL MULTITESTER WITH USB INTERFACE. User Manual
Item ref: 600.104UK MTTR01 TRUE RMS DIGITAL MULTITESTER WITH USB INTERFACE User Manual Please read this manual thoroughly and ensure all contents are fully understood before using the apparatus. WARNING
More informationUser's Guide Extech EX Amp Clamp Meter with IR Thermometer
User's Guide Extech EX810 1000 Amp Clamp Meter with IR Thermometer Patented Introduction Congratulations on your purchase of the Extech EX810 Clamp Meter. This meter measures AC/DC Voltage, AC Current,
More informationMS8250A/B OPERATION MANUAL MS8250A. Hz% FUNC REL RANGE REL HOLD OFF 10A. Hz% A NCV. Hz% COM. A ma 10A FUSED 600V CAT IV.
MS8250A/B DIGITAL MULTIMETER OPERATION MANUAL AUTO DC AC REL hfe PCLINK % C F kmωkz nµmfav MS8250A DIGITAL MULTIMETER Auto Power Off RANGE REL HOLD FUNC NCV A ma OFF 10A A ma 10A FUSED 600V CAT IV COM
More informationBENCH METER Model>9803. Wavecom Instruments
BENCH METER Model>9803 Wavecom Instruments 1 Basic Information This guide provides basic instructions for operating the Mastech M9803R Bench Digital Multimeter. The M9803R provides these features: Multiple
More information