PMIS2 POSIMAG Magnetoresistive Position Sensor with Incremental Output
|
|
- Godwin Franklin
- 6 years ago
- Views:
Transcription
1 PMIS2 POSIMAG with Incremental Compact Sensor for Industrial Applications Sensor PMIS2 Non contact Robust Fast Protection class IP67 Incremental encoder output Reference pulse Specifications Incremental Encoder with differential push-pull Circuit for reliable Data Transmission. The output is compatible with LD, TTL, HTL and CMOS. Excitation Voltage V DC Magnetic period of the sensor 1.0 mm 5.0 mm Guided spacing between sensor and magnetic strip mm mm Linearity (sensor with magnetic strip PMIB2) ±30 µm ±100 µm Max. speed of the sensor 1 m/s 5 m/s Resolution (with external times 4 counting mode) 5 µm 25 µm Material Housing: Aluminium Electrical connection Cable with 8 wires, cable output. 9 pin SUB D connector as option. Weight (w/o cable and connector) 30 ±5 g Protection class (EN 60529) IP67 Environmental EMC DIN EN Temperature C A Posimag Measuring System consists of the Sensor head PMIS2 and the magnetic strip PMIB2 with the same magnetic period. Order Code PMIS2 Model Name PMIS2 M Magnetic period 10 = 1.0 mm, 50 = 5.0 mm Resolution (in µm) with times 4 counting mode Magnetic period 1.0 mm: 5 / 10 / 25 / 50 Magnetic period 5.0 mm: 25 / 50 / 125 / 250 Cable length (in m, standard 2 m) S = Cable output P = Connector SUB-D, 9 pin, at the end of the cable Accessories see page 73 Order Example: PMIS M - S 70 CAT-POS-E ASM
2 PMIS2 POSIMAG with Incremental For guaranteed dimensions consult factory Signal Wiring / signals Cable output Cable colors Connector Sub-D, 9 pin Pin No. Excitation + white 1 Excitation GND (0V) brown 5 Signal B (A + 90 ) green 2 Signal A yellow 3 Signal B gray 7 Signal A pink 6 Signal Z (Ref. pulse) blue 4 Signal Z red 8 Shield black 9 Dimensions cable output Connector SUB-D (Pin) View to connector pins ASM CAT-POS-E
3 PMIB2 POSIMAG Magnetic Strip Compact Sensor for Industrial Applications Magnetic Strip PMIB2 Easy splicing Resistant to moisture and many fluids Extensive ruggedness against dust, chipping etc. The magnetic material is magnetised in defined and even distances and works as a solid measure. The defined magnetisation represents the sensor track and the magnetic strip also contains two additional reference marks. The magnetic strip retains its firmness by means of a spring steel base. Specifications Solid measure Base Masking tape Length of the Magnetic strip Width Plastic bounded flexible permanent magnet Spring steel Stainless steel (unmagnetic) mm (up to 150 m on request) 10 mm +0.1 mm / -0.2 mm Thickness (with masking tape) 1.5 mm ±0.1 mm Magnetic period 1.0 mm 5.0 mm Linearity at 25 C up to 50 m up to 2500 mm ±30 µm/m ±100 µm/m ±100 µm/m ±200 µm/m Linear thermal expansion coefficient 11 x 10-6 /K Operation temperature C Reference pulse (zero pulse) None, one or two (each at the end of the tape) An unmagnetic masking tape made of stainless steel is available as an accessory (see page 71). Note: For correct application the magnetic strip must be longer than the measuring distance by at least 25 mm at each end of the strip. The magnetic strip is flexible and can be glued to the surface of a cylinder with a minimum radius of 100 mm and used for angular measurement. Order Code PMIB2 Model Name PMIB2 Magnetic period 10 = 1.0 mm 50 = 5.0 mm Mounting of the Magnetic Strip N = Adhesive backing Measurement range (in mm, total length = range + 50 mm) 500 / 1000 / 1500 / 2000 / 2500 Other ranges on request Option R1 = 1 reference mark, R2 = 2 reference marks Order Example: PMIB2-10 -N CAT-POS-E-2001 ASM
4 PMIS2/PMIB2 POSIMAG Accessories Masking tape PMAB: Masking tape made of stainless steel for POSIMAG, magnetic strip PMIB2, width 10 mm. Order Code: Length in mm PMAB 10MM Low profile High profile Slider for high profile For guaranteed dimensions consult factory Eccentric tappets (mounting elements) PC-EXZENTER for high profile PM-EXZENTER for low profile ASM CAT-POS-E
5 WS Position Sensors Specification Signal Conditioner Incremental Signal Diagram Recommended Processing Circuit Excitation Voltage VDC Excitation Current 200 ma max. Frequency 200 khz max. Linedriver, Push-Pull, CMOS, TTL and HTL compatible Current 30 ma max., Short Circuit Protection Voltage Depends on the excitation voltage (e.g. to obtain TTL-signals the excitation must be 5 V) Compatible to EIA RS-422/RS-485 Stability (Temperature) ±0.002% / K Full Scale (sensor mechanism) Operation Temperature C Storage Temperature C Transition Time Positive Edge Transition Time Negative Edge Protection 250 ns 250 ns Reverse Polarity, Permanent Short Circuit Immunity to Interference (EMC) According to EN61326: 1998 Encoder Posimag Others Excitation + Excitation GND Signal A Signal A Signal B Signal B Signal Z (Ref. Pulse) Signal Z Signal Levels Signal Wiring / Excitation Level Ia 5mA Ia 25 ma -Ia 5 ma -Ia 25 ma 5V Ua High >4.2 V >4.2 V >4.1 V >3.8 V 5V Ua Low <0.5 V <1.2 V <0.4 V <0.4 V 24 V Ua High >23.5 V >23.5 V >23.5 V >22.5 V 24 V Ua Low <0.5 V <1.2 V <0.4 V <0.4 V Signals Connector WS-CONN-D8 Mating connector View to solder terminals Excitation + 1 Excitation GND (0V) 2 Signal B (A + 90 ) 3 Signal A 4 Signal B 5 Signal A 6 Signal Z (Ref. Pulse) 7 Signal Z 8 WS-CONN-D8 ASM CAT-POS-E
PMIS3 POSIMAG Magnetic Scale Position Sensor
PMIS3 POSIMAG Magnetic Scale Position Sensor Very compact sensor for industrial applications Sensor head PMIS3 Non-contact, no wear High velocity Robust shielded metal enclosure Protection class IP67 Incremental
More informationW(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output
W(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output Position and Velocity Sensor for Long Ranges Protection Class IP50 Measurement Range: 0... 10000 mm to 0... 15000 mm 0...
More informationWS12EX Position Sensor with Analog output Dust explosion-proof
Sensor for Hostile Environments Class IP67 Measurement Range: 0... 100 mm to 0... 3000 mm With Analog Output Dust Ex proof, category 3, zone 22 II 3D EEx T80 C IP67 Specifications Outputs Material Resolution
More informationPOSICHRON position sensor in stick design. Protection class. Voltage: V, 3 wire Current: ma, 3 wire
POSICHRON Position Sensor Stick Design with Analog Specifications POSICHRON position sensor in stick design Protection class IP67 Measurement range 0... 100 up to 0... 5750 mm Absolute position measurement
More informationProtection class. Male 8 pin socket M12 (ADCANOP: 5 pin socket)
WS10SG Analog, SSI or CANopen Output Very compact sensor for industrial applications Protection class IP65 Measurement range 0... 100 mm to 0... 1250 mm Analog output or A/D converted synchronous serial
More informationPOSICHRON position sensor in a stainless steel pressure case. Voltage: V, 3 wire Current: ma, 3 wire
Rod Profile with Analog Specifications POSICHRON position sensor in a stainless steel pressure case Protection class IP68 Compression-proof up to 15 bar Measurement range 0... 100 to 0... 5750 mm Absolute
More informationPOSIROT. PMIS4, PMIR5 Magnetic incremental encoder. Magnetic wheels for rotative applications PMIS4, PMIR5
Variant e: PMIS4, PMIR 5 POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area Highest
More informationProtection Class (IEC 529)
(W)GS2 Velocity Sensor with Analog or A/D converted synchronous serial output Specifications Velocity Sensor with Position Option Class IP50 Measurement Range: 0... 1500 mm to 0... 2500 mm 0... 59.06 in
More informationPOSIWIRE. WS10SG Position Sensor. Cable Extension Position Sensors. Datasheet
Cable Extension Position Sensors Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation
More informationPOSIWIRE. WS12 Position Sensor. Cable Extension Position Sensors. Datasheet
Cable Extension Position Sensors Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any quotation
More informationMounting M12 x 1 EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles
PRDS1 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69 Incremental encoder output Stainless steel housing
More informationMounting M12 x 1 EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles
PRDS1 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69 Incremental encoder output Stainless steel housing
More information300 ma max. 2 mm ,8 mm. ±1 mm. ±1 Digit. A, A, B, B / signal Z, Z (optional) / status signal ERR (optional) Zinc die casting IP67
Variant e: PMIS4, PMIR 7, PM IR7N POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area
More informationResolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
More informationIKS8 Incremental Magnetic Sensing Head
Measuring Positioning IKS8 Incremental Magnetic Sensing Head - Linear applications - Rotary applications - Non contact, quick position measurement Features Precise Programmable with PC or pp Single piece
More informationMeasurement range Protection class IP67 / IP69K Incremental encoder output With.39 shaft or non-contact Magnetic measurement principle
PRDS5 Magnetic Angle Sensor with Incremental Output Magnetic angle 0-360 in a flat housing with 2.6 in. resp. 2.7 in. dia. Measurement range 0-360 Protection class IP67 / IP69K Incremental encoder output
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationOutputs U8 I1. Protection class IP64 (IP67) WB25KT
Analog or Digital Output Position sensor with measuring tape class IP64 (IP67) Measurement range 0... 236.2 in. to 0... 984.3 in. 0... 6000 mm to 0... 25000 mm Steel measuring tape Analog output Redundant
More informationResolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationOutputs U8 I1. Protection class IP64 (IP67) WB25
Analog Output Position sensor with measuring tape class IP64 (IP67) Measurement range 0... 12000 mm to 0... 25000 mm Steel measuring tape Analog output Redundant version on request Specifications Outputs
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationProtection class U8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB10ZG
Analog Output Position sensor with measuring tape Measurement range up to 2000 mm class IP65 Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5... 10 V
More informationAbsolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
More informationAbsolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
More informationProtection class IP67/IP69K Magnetic measurement principle
POSITILT PTAS2 Magnetic inclination sensor with analog output Magnetic inclination sensor in a 36 mm housing Protection class IP67/IP69K Magnetic measurement principle Outputs: Voltage 0.5... 4.5 V; 0.5...
More informationProtection class U8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB10ZG
Analog Output Position sensor with measuring tape Measurement range up to 2000 mm class IP65 Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5... 10 V
More informationMeasurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
Magnetic Angle Sensor with Analog Output Magnetic Angle Sensor 0-360 Measurement range 0-360 Protection class IP67 Analog output Compact, low profile housing Non-contact with external position magnet Wear
More informationIncremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
More informationExpress Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
More informationPOSICHRON PCRP32 Round Profile Housing with Analog Output
PCRP32 Round Profile Housing with Analog Output position sensor in a stainless steel pressure tube Protection class IP67/69K, IP68 Underwater applications, permanent pressure-proof up to 15 bar Measurement
More informationRanges >500 mm: L10 = ±0.10 % f.s. L02 = ±0.02 % f.s. Ranges 500 mm: L10 = ±0.5 mm L02MM = ±0.2 mm Repeatability ±3 µm
Flat Profile Housing with Analog POSICHRON position sensor Only 12 mm height and 36 mm width Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Ultra flat profile
More informationCable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
More informationPOSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet
Magnetic Angle Sensors (Dust-Ex-proof) Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of
More informationU8 I1. Linearity ±0.10 % f. s.; optional ±0.05 % WB12
Analog Output Position sensor with measuring tape Measurement range up to 4000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...
More informationPOSIWIRE. WS85 with internal magnetic encoder Position Sensor. Cable Extension Position Sensors. Datasheet
Cable Extension Position Sensors with internal magnetic encoder Position Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does
More information0.04 mm Distance/revolution mm ±0.05% f. s.; ±0.01% f. s. as option. Measurement range (in mm) 2500 (smaller measurement ranges included)
WS58C Absolute Encoder Output Very compact position sensor Measuring range 0... 2500 mm With absolute encoder output High precision linearity up to ±0.01 % full scale Specifications Output for 12 bit/revolution
More informationU8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB61
Analog Output Position sensor with measuring tape Measurement range up to 4000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
More informationOutputs Voltage: V; V
PRAS3 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 degrees in a 36 mm dia. housing With 10 mm shaft or 6 mm hollow shaft Protection class IP67/IP69K Magnetic measurement principle
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
More informationDRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationIXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
More informationMYLES-3 MAGNETIC LINEAR ENCODER SYSTEM
MYLES-3 MAGNETIC LINEAR ENCODER SYSTEM magnetic measuring scale and free floating unguided sensor head Incremental Encoder output A,B Contact-less and vear free system Robust shielded metal enclosure Protection
More informationPOSIROT. PRAS7 Magnetic Angle Sensor. Magnetic Angle Sensors. Datasheet
Magnetic Angle Sensors PRAS7 Magnetic Angle Sensor Datasheet PRAS7 Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any
More informationQUANTiC series encoder system
L-9517-9778-03-A QUANTiC series encoder system The QUANTiC encoder series provides robust incremental position measurement for linear and rotary systems with excellent metrology and wide installation tolerances.
More informationOnline data sheet TTK70-HXA0-K02 TTK70 MOTOR FEEDBACK SYSTEMS LINEAR HIPERFACE
Online data sheet TTK70-HXA0-K02 TTK70 TTK70-HXA0-K02 TTK70 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Measuring step Measuring length Ordering information
More informationTemposonics. E-Series Model ER. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. Analog and Start/Stop Outputs.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors Analog and Start/Stop Outputs SENSORS Document Part Number: 550996 Revision E Data Sheet FEATURES Linear, Absolute Measurement
More informationMHAD 50 - HDmag. Features
Magnetic sensing, hollow shaft 30 mm MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationEncoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
More informationIntelLiCoder (ICODER) - General information. ICODER - Measuring principle
IntelLiCoder (ICODER) - General information Based on the tried and tested ICODER technology of length and angle acquisition where a high precision graduations with structures etched photolithographically
More informationNOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
More informationAcceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
More informationTemposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Stroke length mm. Perfect data processing 0.
R-Series Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH 25 7600 mm Perfect data processing 0.5 μm Rugged industrial sensor Linear and absolute measurement LEDs for sensor
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationMagnetics that count. Features
Measuring Positioning IKS11 Magnetic Sensing Head - Linear Applications - Rotational Applications - Non contact, quick position measurement Features High accuracy options available Single piece unit Customizable
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationLE18, LE20, LE25 Incremental Linear Encoders
and LE30 LE18, LE20, LE25 Incremental Linear Encoders Motion Type: Linear Usage Grade: Industrial Output: Incremental Max Resolution: 0.1 to 10 m High Resolution - Industrial Ruggedness The Models LE18,
More informationResolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS2 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 in a flat housing with 36 mm dia. Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Flat housing 20 mm thickness
More information847H. Description. Features. Specifications
847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536
More informationTemposonics. R-Series SSI. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm. Perfect data processing I 7 I
Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Measuring length 5-7600 mm Perfect data processing 0,5 µm Rugged Industrial Sensor Linear and Absolute Measurement LEDs
More informationMagnetic Linear Measuring System. MS01 Technical manual
Magnetic Linear Measuring System MS1 Technical manual a The measuring scale is made of a polymerbonded ferritic material. An alternating magnetic field H is produced over the measuring carrier by systematic
More informationMeasurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )
PRAS5 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 in a flat housing with 66 mm resp. 68.2 mm dia. Measurement range 0-360 Protection class IP67 / IP69K, optional IP68* Analog output
More informationPOSICHRON rod-style position sensor PCST25
PCST25 Rod-Style Design with Analog Output POSICHRON rod-style position sensor For hydraulic cylinders, fluid level measurement Protection class up to IP67/IP69K Measurement range 0... 100 to 0... 5750
More informationPOSIROT. PRAS3 Magnetic Angle Sensor. Magnetic Angle Sensors. Datasheet
Magnetic Angle Sensors PRAS3 Magnetic Angle Sensor Datasheet PRAS3 Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of any
More informationPOSICHRON position sensor in a stainless steel pressure tube. Protection class IP68/IP69K
Round Profile Housing with Analog POSICHRON position sensor in a stainless steel pressure tube Protection class IP68/IP69K Underwater applications, permanent pressure-proof up to 15 bar Measurement range
More informationMIG Encoders BEGE MIG NOVA+ Your drive, our (trans)mission. BEGE Power Transmission
MIG Encoders BEGE MIG NOVA+ BEGE Power Transmission Anton Philipsweg 30 2171 KX Sassenheim The Netherlands T: +31 252-220 220 E: bege@bege.nl W: www.bege.nl Your drive, our (trans)mission Mounting a conventional
More informationQR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More information2-channel speed sensor GEL 248 Compact sensor with HTL-/TTL-output signals
2-channel speed sensor GEL 248 Compact sensor with HTL-/TTL-output signals Technical information Version 08.09 General information Application approved speed sensor based on magnetic measurement principle
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
More informationIncremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH PWM Output Data Sheet SENSORS Document Part Number 551119 Revision B M-Series
More informationMAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS
MAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS Low-maintenance for large shafts Certain motors benefit from having the speed feedback sensor mounted directly on the main shaft. A bearingless
More informationMaterial: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
More informationUltra flat POSICHRON position sensor. Current Resolution
Ultra flat Profile Housing with analog Ultra flat POSICHRON position sensor Only 8 mm high and 28 mm wide Protection class up to IP67 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement
More informationHeavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
More informationXXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationXXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationPOSIHALL. PH36 Magnetic Multiturn Angle Sensor. Magnetic Multiturn Angle Sensors. Datasheet
Magnetic Multiturn Angle Sensors Magnetic Multiturn Angle Sensor Datasheet Copyright ASM Automation Sensorik Messtechnik GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this
More informationPOSICHRON position sensor in square profile. Protection class
Square Profile Housing with Analog Output POSICHRON position sensor in square profile Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Easy installation with
More informationRGH24 encoder system. Data sheet L C. RGH24 readhead: RGS20 scale:
L-9517-9677-01-C Renishaw s RGH24 series is a non-contact optical encoder system. The compact readhead features a set-up led indicator, unique filtering optics for excellent dirt immunity, and integral
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationNOVOHALL Rotary Sensor touchless technology transmissive. Series RFC4800 analog
NOVOHALL Rotary Sensor touchless technology transmissive Series RFC4800 analog The RFC 4800 utilizes a separate magnet or magnetic position marker, attached to the rotating shaft to be measured. The orientation
More informationMagnetic Encoder MEM 22
Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed
More informationAbsolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT
Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:
More informationRGH34 encoder system. Data sheet L A. RGH34 readhead and RGI34 interface: RGS40 scale:
L-9517-978-01-A The Renishaw RGH34 series is a non-contact optical encoder system, providing highly-reliable positional feedback. This modular miniaturised encoder consists of an RGH34 readhead that reads
More informationTorque Sensor. Torque. with Dual-Range-Option. Type 4503A...
Torque Torque Sensor with Dual-Range-Option Type 4503A... Type 4503A... torque sensors with built-in speed sensor operate on the strain gage principle. An integral, digital measurement conditioning system
More informationRanges >500 mm: L10 = ±0.10 % f.s. L02 = ±0.02 % f.s. Ranges 500 mm: L10 = ±0.5 mm L02MM = ±0.2 mm Repeatability ±3 µm. 4 pin socket M8 / cable 2 m
Flat Profile Housing with Analog POSICHRON position sensor Only 12 mm height and 36 mm width Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Ultra flat profile
More informationData Sheet MEM 22. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM 22 IE Rev.1.9 / 16.05.2017 info@pwb-encoders.com
More informationTECHNICAL DATASHEET Incremental Encoder RI 30
Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationExtremely robust Inclination Sensor with Analog Output U8 I1. Measurement range ±180 for 1 axis or ±60 for 2 axes
PTAM5 Extremely robust Inclination Sensor with Analog Output Analog Inclination Sensor with 1 or 2 axes in MEMS technology Measurement range ±180 for 1 axis or ±60 for 2 axes class IP67 / IP69K, optional
More informationTechnical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
More information