2 line filters SIFI F for normal insertion loss

Transcription

1 SIFI F or normal insertion loss 25 V DC/AC, 5/ Hz, A Series/Type: Date: Version: 7 EPCOS AG 8. Reproduction, publication and dissemination o this publication, enclosures hereto and the inormation contained therein without EPCOS prior express consent is prohibited.

2 SIFI F or normal insertion loss Construction 2 line ilter Metal case Polyurethane potting (UL 94 V ) Features Optimized leakage current Easy to install Compact design Cost optimized construction ENEC1, UL und cul approval c us Applications Switched mode power supplies or industrial electronics telecom systems data systems DC applications Medical engineering Type M Terminals Filters up to A tab connectors 6.3 x.8 mm Threaded studs M5 or ilters rom 25A to 36A Marking Marking on component: manuacturer s logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum marking on packaging: mauacturer s logo, ordering code, date code, quantity Important notes at the end o this document.

3 SIFI F or normal insertion loss Typical circuit diagram o B84111FB* and B84111FG* LINE LOAD L L N N Technical data and measuring conditions o B84111FB* and B84111FG* Rated voltage V R 25 V DC/AC Rated requency R 5/ Hz Test voltage line to line or 2 s U test 177 V DC Test voltage line to case or 2 s U test 27 V DC Leakage current I leak At 23 V AC, 5 Hz Rated temperature T R C Climatic category (IEC 68 1) 25//21 Important notes at the end o this document.

4 SIFI F or normal insertion loss Typical circuit diagram o B84111FM* (or medical applications) Line Load L L N N Technical data and measuring conditions o B84111FM* (or medical applications) Rated voltage V R 25 V DC/AC Rated requency R 5/ Hz Test voltage line to line or 2 s U test 177 V DC Test voltage line to case or 2 s U test 25 V AC Leakage current I leak At 23 V AC, 5 Hz Rated temperature T R C Climatic category (IEC 68 1) 25//21 Important notes at the end o this document.

5 SIFI F or normal insertion loss Characteristics and ordering codes or B84111FB* and B84111FG* I R C R L R I leak Approx. weight R typ Ordering code Approvals A mh ma g mω 3 2 x.1 µf (X2) 2 x 47 pf (Y2) 6 2 x.1 µf (X2) 2 x 47 pf (Y2) 1 2 x.1 µf (X2) 2 x 47 pf (Y2) 16 2 x.1 µf (X2) 2 x 47 pf (Y2) 2 x.1 µf (X2) 2 x 47 pf (Y2) 25 2 x.1 µf (X2) 2 x 47 pf (Y2) 36 2 x.47 µf (X2) 2 x 1 nf (Y2) 2 x 1.5 < B84111FB3 2 x 1.8 < B84111FB 2 x.87 < B84111FB11 2 x.65 < B84111FB116 2 x.43 < B84111FB1 X X X X X X X X X X X X X X X 2 x.66 < B84111FG125 X X X 2 x.4 < B84111FG136 X X X Characteristics and ordering codes or B84111FM* (or medical applications) I R C R L R I leak Approx. weight R typ Ordering code Approvals A mh µa g mω 3 2 x.1 µf (X2) 2 x 1.5 < B84111FM3 X X X 6 2 x.1 µf (X2) 2 x 1.8 < B84111FM X X X 1 2 x.1 µf (X2) 2 x.87 < B84111FM11 X X X 16 2 x.1 µf (X2) 2 x.65 < B84111FM116 X X X 2 x.1 µf (X2) 2 x.43 < B84111FM1 X X X 25 2 x.1 µf (X2) 2 x.66 < B84111FM125 X X X 36 2 x.47 µf (X2) 2 x.4 < B84111FM136 X X X X = approval granted Important notes at the end o this document.

6 SIFI F or normal insertion loss Dimensional drawings 3 11 Important notes at the end o this document.

7 SIFI F or normal insertion loss Dimensional drawings Important notes at the end o this document.

8 SIFI F or normal insertion loss Dimensional drawings Important notes at the end o this document.

9 SIFI F or normal insertion loss Insertion loss (typical values at Z = 5 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) dierential mode (symmetrical) B84111FB3 B84111FB Hz Hz 1 8 B84111FB11 B84111FB Hz Hz 1 8 Important notes at the end o this document.

10 SIFI F or normal insertion loss Insertion loss (typical values at Z = 5 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) dierential mode (symmetrical) B84111FB1 B84111FG Hz Hz 1 8 B84111FG Hz 1 8 Important notes at the end o this document.

11 SIFI F or normal insertion loss Insertion loss (typical values at Z = 5 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) dierential mode (symmetrical) B84111FM3 B84111FM Hz Hz 1 8 B84111FM11 B84111FM Hz Hz 1 8 Important notes at the end o this document.

12 SIFI F or normal insertion loss Insertion loss (typical values at Z = 5 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) dierential mode (symmetrical) B84111FM1 B84111FM Hz Hz 1 8 B84111FM Hz 1 8 Important notes at the end o this document.

13 SIFI F or normal insertion loss Caution and warnings Please note the advices in our data book EMC Filters (latest edition); attention should be paid to the chapter General saety notes. It shall be ensured that only qualiied persons (electricity specialists) are engaged on work such as planning, assembly, installation, operation, repair and maintenance. They must be provided with the corresponding documentation. Danger o electric shock. EMC ilters contain components that store an electric charge. Dangerous voltages can continue to exist at the ilter terminals or longer than ive minutes even ater the power has been switched o. The protective earth connections shall be the irst to be made when the EMC ilter is installed and the last to be disconnected. Depending on the magnitude o the leakage currents, the particular speciications or making the protective earth connection must be observed. Impermissible overloading o the EMC ilter, such as with circuits able to cause resonances, impermissible voltages at higher requencies etc. can lead to bodily injury and death as well as cause substantial material damages (e.g. destruction o the ilter housing). EMC ilters must be protected in the application against impermissible exceeding o the rated currents by overcurrent protective. In case o leakage currents > 3.5 ma you shall mount the PE conductor stationary with the required cross section beore beginning o operation and save it against disconnecting. For leakage currents I L 4) < 1 ma the PE conductor must have a KU value 3) o 4.5; or leakage currents I L 1 ma the PE conductor must have a KU value o 6. 3) The KU value (symbol KU) is a classiication parameter o saety reerred ailure types designed to ensure protection against hazardous body currents and excessive heating. A value o KU = 4.5 with respect to interruptions is attained: with a permanently connected protective earth circuit 1.5 mm 2 with a protective earth circuit 2.5 mm 2 connected via shroud connectors (IEC 39 2). KU = 6 with respect to interruptions is achieved or ixed connection lines 1 mm 2 where the type o connection and line layout correspond to the requirements or PEN conductors as speciied in relevant standards. 4) I L = leakage current let go Important notes at the end o this document.

14 SIFI F or normal insertion loss Important notes The ollowing applies to all products named in this publication: 1. Some parts o this publication contain statements about the suitability o our products or certain areas o application. These statements are based on our knowledge o typical requirements that are oten placed on our products in the areas o application concerned. We nevertheless expressly point out that such statement cannot be regarded as binding statements about the suitability o our products or a particular customer application. As a rule, EPCOS is either unamiliar with individual customer applications or less amiliar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product speciication is suitable or use in a particular customer application. 2. We also point out that in individual cases, a malunction o electronic components or ailure beore end o their usual service lie time cannot be completely ruled out in the current state o the art, even i they are operated as speciied. In customer applications requiring a very high level o operational saety and especially in customer applications in which the malunction or ailure o a passive electronic component could endanger human lie or health (e.g. in accident prevention or lie saving systems), it must thereore be ensured by means o suitable design o the customer application or other action taken by the customer (e.g. installation o protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event o malunction or ailure o a passive electronic component. 3. The warnings, cautions and product speciic notes must be observed. 4. In order to satisy certain technical requirements, some o the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useul inormation on this will be ound in our Material Data Sheets on the Internet ( Should you have any more detailed questions, please contact our sales oices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change rom time to time. The same is true o the corresponding product speciications. Please check thereore to what extent product descriptions and speciications contained in this publication are still applicable beore or when you place an order. We also reserve the right to discontinue production and delivery o products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aorementioned does not apply in the case o individual agreements deviating rom the oregoing or customer speciic products. 6. Unless otherwise agreed in individual contracts, all orders subject to the current version o the General Terms o Delivery or Products and Services in the Electrical Industry published by the the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCAP, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further inormation will be ound on the Internet at 1 Important notes at the end o this document.