Elettra Evolution OK! OK! b. User manual
|
|
- Brianne Hortense Wade
- 6 years ago
- Views:
Transcription
1 Elettr Evolution User mnul Pg. 1 INSTALLING THE SOLENOID VALVE. The progrmmle solenoi vlve is fully wtertight n will funtion even if instlle permnently uner wter t epth of up to one metre (IP68 ingress protetion). It n e instlle in the open or in vlve ox, positione either horizontlly or vertilly.to ensure the ontrol unit remins wtertight, mke ertin tht it is ligne with n fully inserte in its set, n tht the trnsprent over is seurely srewe on, with the sel properly positione in its groove. Wrning: e ertin to instll the progrmmle solenoi vlve oserving the wter flow iretion inite y the rrow: "FLOW". To instll the ttery n set the progrmmes, simply lift the li of the vlve ox: the solenoi vlve n e esily hnle insie the ox. OK! mx 1m OK! For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): FITTING THE. Unsrew the trnsprent over. Remove the ontrol unit. Unsrew the p of the ttery housing n onnet the ttery, oserving the orret polrity. Fit the ttery insie the housing. Retighten the p, heking tht the sel is positione orretly in its set. Align the ontrol unit with the guie on the sing n fit it k into ple. Retighten the trnsprent over, heking tht the sel is in its set. Importnt: use only 9V lkline tteries. When fitting the ttery, the isply lights up for 2 seons, the solenoi vlve loses, n the timer lok will e set utomtilly to 00:00. Alline 9V 2 se. 9V Alline For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): 90827
2 Elettr Evolution Pg. 2 SETTING THE CURRENT TIME. Pressing the utton ENTER, the messge OK will pper. Set the urrent time using the FORWARD/BACK key uttons. (09:00, for exmple) Press ENTER to onfirm the setting. User mnul x 1 x 1 k forwr For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): DAILY PROGRAMMING. The timer is progrmme using just 3 uttons, with the i of wie isply.eh pge hs two funtions: view progrm n, pressing ENTER, mke hnge to progrm. Pressing forwr, the isply will show the other progrms of the line. TIME OPEN PROGRAM 1 (OPEN) CLOSE PROGRAM 1 (CLOSED) OPEN PROGRAM 2 (OPEN) CLOSE PROGRAM 2 (CLOSED) OPEN PROGRAM 3 (OPEN) CLOSE PROGRAM 3 (CLOSED) OPEN PROGRAM 4 (OPEN) CLOSE PROGRAM 4 (CLOSED) OPEN PROGRAM 5 (OPEN) CLOSE PROGRAM 5 (CLOSED) OPEN PROGRAM 6 (OPEN) For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): CLOSE PROGRAM6 (CLOSED)
3 Elettr Evolution Pg. 3 Press the FORWARD utton to view the strt time t whih the vlve opens, for progrmme 1. Press ENTER to hnge the time isplye. Use the FORWARD n BACK key uttons to set the strt time (open): for exmple, 10:26 hours. Press ENTER to onfirm the setting. Press FORWARD seon time to view the losing time of the vlve, for progrmme 1. User mnul For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): The isply res 1=progr. 1 CLOSED. Use the FORWARD n BACK key uttons to set the require losing time (lose): for exmple, 10:35 hours. Press ENTER to onfirm the setting If susequent progrmmes re to e set, repet the sme proeure. For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): 90827
4 Elettr Evolution User mnul Pg. 4 WEEKLY PROGRAMMING. Press the FORWARD key utton repetely until the weekly progrmming pge is isplye. Press ENTER to mke hnges to the weekly progrmming sheule. Numer 1 is ssoite with the urrent y of the week on whih the first wtering progrmme is to e set: if the urrent y is Thursy, for exmple, then 1=Thursy, 2=Friy, et. Use the FORWARD n BACK key uttons to position the ursor on the y of the week you wish to selet. Press ENTER to etivte or retivte wtering for the selete y (the reltive numer isppers from the isply). For exmple: 2 (Friy) n 5 (Mony) To quit weekly progrmming, position the ursor uner EXIT n press ENTER. x 3 x 3 TIME TIME TIME For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): MANUAL FUNCTION. Press the FORWARD key utton to isply the mnul wtering funtion. Press ENTER to tivte it. Pressing BACK, the timer vlve opens, whilst pressing FORWARD the vlve will lose. This funtion is useful for wtering plnts when require, without eleting the progrmmes lrey store. In ny se, the vlve will lose utomtilly fter 5 minutes. To quit the mnul funtion efore 5 minutes hve elpse, lose the vlve n press ENTER. 1 2 TIME TIME TIME e TIME For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): 90827
5 Elettr Evolution Pg. 5 DELETE PROGRAMMES. To elete progrmme, press FORWARD until the isply shows the CLOSED pge for the progrmme to e remove (progrmme 2, for exmple) Press ENTER, then press the FORWARD n BACK key uttons simultneously. 1 x 4 2 User mnul Progrm 1 elete For Elettr Evolution 1 F (o.): For Elettr Evolution 1 M (o.): For more informtion n further etils, plese onsult the instrution mnul supplie with the prout.
Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;
Aquuno Select Pg. INSTALLATION. Attch the timer to cold wter tp, following these simple instructions. Do not instll the timer in pit or vlve ox, elow ground level or indoors. Do not use the timer with
More informationASY P.O. BOX 729 TERRELL, TEXAS / PAGE 1 OF 13 SAM
203 Madix Inc., ll rights reserved ommon Parts 2 MXI GRI WIRE GRI SHELF WITH (GPWGS) MXI GRI FIXTURE PNEL (GPWFP) FIXTURE PNELS RE USE S EN SUPPORT. SHELF N E USE NYWHERE. MXI GRI REINFORMENT R 3 (GPR)
More informationMcAfee Network Security Platform
Revision D MAfee Network Seurity Pltform (M-8000 Quik Strt Guie) This Quik Strt Guie explins how to quikly set up n tivte your MAfee Network Seurity Pltform [formerly MAfee IntruShiel ] M-8000 Sensor in
More informationQuestion Paper Wednesday 13 Thursday 14 January 2010
KEY SKILLS INFORMATION AND COMMUNICATION TECHNOLOGY Level 3 ArtComp [KSI31] Question Pper Wenesy 13 Thursy 14 Jnury 2010 Do NOT open this Question Pper until you re tol to y the invigiltor THERE ARE THREE
More informationINSTALLER REFERENCE GUIDE
PEN009-B_06_0.ook Pge Thursy, My 9, 06 : PM INSTALLER REFERENCE GUIDE PEN009-B_06_0.ook Pge Thursy, My 9, 06 : PM Contents pge Instller referene guie Aout this oument Aout this oument.... Aout this oument.....
More informationOperation Manual. Embroidery Machine. Product Code: 888-M30/M31
Opertion Mnul Emroiery Mhine Prout Coe: 888-M30/M31 Be sure to re this oument efore using the mhine. We reommen tht you keep this oument nery for future referene. INTRODUCTION Thnk you for purhsing this
More informationMODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH "H" HOLDER ARMS
MODEL POWERGLIDE SERIES INSTRUTIONS FOR INSTLLING SRGENT LOSERS WITH "H" HOLDER S SERIES NON SIZED DJUSTLE SIZES THRU 6 UTION: FILURE TO INSTLL OR DJUST PROPERLY MY RESULT IN INJURY OR DMGE. FOR SSISTNE,
More informationDCM Series DC T-Series Non-Spring Return Rotary Electronic Damper Actuators
DCM-0 Series DC-0-T-Series Non-Spring Return Rotry Eletroni Dmper Atutors. Atutor. U-olt shft pter. Position initor EA0R e f g. Shft pter loking lip e. Position initor pter f. Mounting rket g. Mounting
More informationWORKSHOP 15 PARASOLID MODELING
WORKSHOP 15 PARASOLID MODELING WS15-2 Workshop Ojetives Crete prsoli moel of tension fitting using numer of the prsoli tools in MSC.Ptrn WS15-3 Suggeste Exerise Steps 1. Crete new tse for the tension fitting
More informationSIMPLEX 5000 CYLINDRICAL INSTALLATION INSTRUCTIONS
SIMPLEX 5000 CYLINDRICAL INSTALLATION INSTRUCTIONS TABLE OF CONTENTS Exploe Instll Prts...........................................................3 Tools Require.................................................................3
More informationSERVICE MANUAL 9940/20/10
9940/0/0 9/0/00 Tle of ontents REMOVING THE EXTERIOR PARTS... A. Light Cover... B. Bse... C. Top Cover (Flp)... 4 D. Hinge Cover... 4 E. Thred Tension Cover... 4 F. Side Enlosure... 5 G. Hndle nd Unit
More informationPOWER TRIM. Table of Contents. Section 5C - Dual Power Trim System
SERVICE MANUAL NUMBER 28 Tle of Contents POWER TRIM Setion 5C - Dul Power Trim System DUAL POWER TRIM SYSTEM Lurints / Selnts / Adhesives..... 5C-2 Importnt Informtion................ 5C-2 Testing Dul
More informationPROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN
RMMING MNUL MTM/01 MTMV/01 FB00329-EN Generl precutions Red the instructions crefully efore eginning the instlltion nd crry out the ctions s specified y the mnufcturer. The instlltion, progrmming, commissioning
More informationRWM4400UH High Performance Hand Held Wireless Microphone System
CH 1 CH 2 CH 3 CH 4 UHF QUAD VOLUME MAX VOLUME MAX VOLUME MAX VOLUME RWM 4400UH MIN MIN MIN CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 RWM4400UH High Performne Hnd Held Wireless Mirophone System OWNER S MANUAL
More informationSEIKO DIGITAL STOPWATCH Cal. S058
SEIKO IGITL STOPWTH al. S058 You are now the proud owner of a SEIKO igital Stopwatch al. S058. For best results, please read the instructions in this booklet carefully before using your SEIKO igital Stopwatch.
More informationmac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v
mc profile Mcintosh 10.5-10.10 Configurtion Guide Adoe Photoshop CS/CC Swgrss Virtuoso SG400/SG800 v20150427 Configurtion Guide - Photoshop CS/CC Swgrss SG400/800 Before proceeding, ensure the correct
More informationISM-PRO SOFTWARE DIGITAL MICROSCOPE OPERATION MANUAL
MN-ISM-PRO-E www.insize.om ISM-PRO SOFTWARE DIGITAL MICROSCOPE OPERATION MANUAL Desription Clik Next. As the following piture: ISM-PRO softwre is for ISM-PM00SA, ISM-PM600SA, ISM- PM60L digitl mirosopes.
More information001CK CK0012 FR-001CK0013 FR EN English
AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion
More informationCAL. NX15 DUO-DISPLAY QUARTZ
L. NX15 UO-ISPLY QURTZ l nlogue time disply l igitl time nd clendr l hronogrph l Tchymeter l t recll function l lrm l Illuminting light (Electroluminescent pnel) ENGLISH Illuminting light (TIME/LENR mode
More informationA 3 WIRE PASSES THROUGH FLOOR IN THIS AREA.
PORT-SOLR,SINGLE 000 / -0-000 G9-0-U () WTER PUMP SWITH ETIL J HRNESS- SLIEOUT MOTOR 90-0-000 PNEL-SWITH 0000 / -0-HT 0-0-000 () TUTOR 0-0-HT () LEL-STILIZER 0000099 / 0-0-HT INPUT ONNETIONS PORTLE STELLITE
More informationAnalog Input Modules
7 922 nlog Input odules G56... nlog input modules for the ontrol of SQ5... ir dmper tutors y ontinuous nlog ontrol signls, suh s 4...20 m, nd ontinuous nlog position feedk signls. For supplementry Dt Sheets,
More informationMcAfee Network Security Platform
M-2750 Sensor Quik Strt Guide Revision B MAfee Network Seurity Pltform This Quik Strt Guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform M-2750 Sensor in in-line mode. Cling
More informationOperation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V12/V13/V15
GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Produt Code: 888-V12/V13/V15 Be sure to red this doument efore using the mhine. We reommend tht you keep this
More informationMcAfee Network Security Platform
M-6030 Sensor Quik Strt Guide Revision B MAfee Network Seurity Pltform This Quik Strt Guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform [formerly MAfee IntruShield ] M-6030
More informationGETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Operation Manual. Computerized Sewing Machine
GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Importnt Sfety Instrutions Plese red these sfety instrutions efore ttempting to use the mhine. This mhine is
More informationAGA56... Analog Input Modules. Siemens Building Technologies HVAC Products
7 922 nlog Input odules G56... nlog input modules for the ontrol of SQ5... ir dmper tutors y ontinuous nlog ontrol signls, suh s 4...20 m, nd ontinuous nlog position feedk signls. For supplementry Dt Sheets,
More informationOperation Manual. Product Code 885-V51. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX
Computerized Emroidery Mhine Opertion Mnul Produt Code 885-V51 GETTING READY EMBROIDERY APPENDIX Plese visit us t http://solutions.rother.om where you n get produt support nd nswers to frequently sked
More information36C 10 MOBILEYE WJ,AFM TO STABILIZERS DOWN INDICATOR LIGHT AND ALARM 64A LJ,LR,KE TO BATTERY BOOST SWITCH STARTER CABLE TO CHASSIS BATTERY DETAIL
-PL -0-HT () RIVET 000H-0-0R () 0 MOILEYE SEL-TRIM,EGE -0-000 (0MM) PNEL-WIRE OVER -0-HT WJ,FM TO STILIZERS OWN INITOR LIGHT N LRM LJ,LR,KE TO TTERY OOST SWITH PNEL-WIRE OVER -0-HT STRTER LE TO HSSIS TTERY
More informationInstallation manual. Daikin Altherma LAN adapter BRP069A61 BRP069A62. Installation manual Daikin Altherma LAN adapter. English
Instlltion mnul Dikin Altherm LAN dpter BRP069A6 BRP069A6 Instlltion mnul Dikin Altherm LAN dpter English Tle of ontents Tle of ontents Aout the doumenttion. Aout this doument... Aout the produt. Comptiility....
More information1" MORTISE INSTALLATION INSTRUCTIONS
K Aess Control 2941 Indin Avenue Winston-Slem, NC 27105 USA Tel: (800) 849-8324 (336) 725-1331 Fx: (800) 346-9640 (336) 725-3269 www.kess.om www.e-plexlok.om PKG3140 0507 1" MORTISE INSTALLATION INSTRUCTIONS
More informationPORCH. Canopies and Accessories DECKING SYSTEMS. For more information. STOCKISTS For details of your nearest stockist for any product:
DECKING SYSTEMS For more informtion STOCKISTS For etils of your nerest stokist for ny prout: 0 01 TECHNICAL HELPLINE For further help n vie: 0 1 INTERNET rihrurige.o.uk EMAIL info@rihrurige.o.uk Whittington
More informationPORCH. Canopies and Accessories. For more information. STOCKISTS For details of your nearest stockist for any product:
For more informtion STOCKISTS For etils of your nerest stokist for ny prout: 0 01 TECHNICAL HELPLINE For further help n vie: 0 1 INTERNET www.rihrurige.o.uk EMAIL info@rihrurige.o.uk Whittington Ro Oswestry,
More information* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service
*24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok
More informationBACK DOOR GLASS REPLACEMENT HINT:
WINSHIEL/WINOWGLSS/MIRROR REPLEMENT 7025 The instlltion proeures re the removl proeures in reverse orer. However, only instlltion proeures requiring itionl inormtion re inlue. 700VX01 Pino Wire lip 1.
More informationAluminium Roof Outlets - Introduction to Detail Outlets
Aluminium Roof Outlets - Introution to Detil Outlets The Hrmer Roof Detil rnge inlues outlets to over ll the wkwr etiling situtions tht our in uiling esign n in refurishment. Min Chrteristis Hrmer Roof
More informationIMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.
More informationINSTALLATION GUIDE P57T15 PARTITION CURRENT TAHOE. pro-gard.com STRONG RELIABLE SECURE
INSTLLTION GUIE PT PRTITION 0 - URRENT THOE STRONG RELILE SEURE pro-gard.com 00.0.0 THESE OMPONENTS RE REQUIRE TO INSTLL THE PRTITION Hardware Kit Wing Kit PXXT PK WKT I. The following tools will be required
More informationD DETAIL AA. 1 OF / Nov-2016 NOTES: JY YYF SWITCH-WATER PUMP CHT ACTUATOR CHT CIRCUITS JA,JY,YYF,XXZ
SWITH-WTER PUMP 0--HT TUTOR 0-0-HT IRUITS J,JY,YYF,XXZ SWITH-UTO LEVEL 0--000 TUTOR 0-0-HT IRUITS SS,SSE,SS,SSF,SSE INPUT ONNETIONS PORTLE STELLITE ISH LE PLTE-WLL, UL OX 9-0-HT G9-0-0U () XXZ J Switch
More informationRegular languages can be expressed as regular expressions.
Regulr lnguges cn e expressed s regulr expressions. A generl nondeterministic finite utomton (GNFA) is kind of NFA such tht: There is unique strt stte nd is unique ccept stte. Every pir of nodes re connected
More informationCONGRATULATIONS ON CHOOSING OUR MACHINE PLEASE READ BEFORE USING THIS MACHINE
CONGRATULATIONS ON CHOOSING OUR MACHINE Your mhine is the most dvned omputerized household sewing mhine. To fully enjoy ll the fetures inorported, we suggest tht you study the mnul. PLEASE READ BEFORE
More informationINSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS.
INSTALLATION & OPERATION INSTRUCTIONS FOR LEVER HANDLE LOCKSETS 999-00333E_EN FOR BRINKS HOME SECURITY INTERIOR LOCKING & NON-LOCKING LEVER HANDLE LOCKSETS. FITS DOORS 1-3/8" (35 mm) TO 1-3/4" (45 mm)
More informationProgramming Guide. Neurostimulators for Chronic Pain. RestoreSensor, RestoreUltra, RestoreAdvanced, and PrimeAdvanced
Progrmming Guide Neurostimultors for Chroni Pin RestoreSensor, RestoreUltr, RestoreAdvned, nd PrimeAdvned For use with SureSn MRI nd erlier non-suresn Neurostimultion Systems. Overview This guide desries
More informationD TO PSM (AEU,AEW,AEX,AEZ, AEY,AFA,AFB,AFC)
PNEL-WIRE OVER -0-HT -PL,WSHER TYPE -0-HT () 0 RIVET 000H-0-0R () SEL-TRIM -0-000 (0 MM) WJ,FM TO STILIZERS OWN INITOR LIGHT N LRM MOILEYE 0-SPRINTER, PSM 000 / -0-000 STRTER LE TO HSSIS TTERY ETIL SEL-TRIM
More informationFor installation help please visit Please Do Not Return Product to Store!
Instlltion Guide Replement Sreen Housing for ndersen Luminire Retrtle Inset Sreen Door For instlltion help plese visit www.ndersenluminire.om/instll Plese Do Not Return Produt to Store PLESE ll the Storm
More informationComputerized Embroidery and Sewing Machine. Operation Manual
GETTING READY SEWING BASICS 2 UTILITY STITCHES 3 EMBROIDERY 4 APPENDIX 5 Computerized Emroidery nd Sewing Mhine Opertion Mnul Produt Code: 885-U0/U04 Be sure to red this doument efore using the mhine.
More informationCOVER-ELECTRICAL CHT LABEL-SLIDEOUT WIRE ASM-AUX HOLDING TANK PIN HOUSING TO WIRE ASM-AUX HOLDING TANK LSS-1
ONTROL-SLIEOUT,IN-WLL FRONT LEFT 900-0-000 G9-0-U () -PIN HSG FROM WIRE SM-HSSIS IRUITS Y,Z,R,U -PIN HSG FROM WIRE SM-HSSIS IRUIT J -PIN HSG FROM WIRE SM-HSSIS IRUITS LLL,LLK OVER-ELETRIL 99-0-HT LEL-SLIEOUT
More informationECE 274 Digital Logic Spring Digital Design. Combinational Logic Design Process and Common Combinational Components Digital Design
ECE 27 Digitl Logi Spring 29 Comintionl Logi Design Proess n Common Comintionl Components Digitl Design 2.7 2. Digitl Design Chpter 2: Comintionl Logi Design Slies to ompn the tetook Digitl Design, irst
More informationDETAIL A SCALE 1 : 85
ISIONS ZONE LTR. ESRIPTION TE PP - INITIL RELESE PER N NORTH.0 0 EST ISOLTE P (0" X.") 0 9 0 X FOOKE # 0 ENTER ISOLTE P (" X 9") WEST ISOLTE P (0" X.") FOOKE # 0. RWING ONTENTS SHEET : OVERLL LYOUT SHEET
More informationWIRE ASM-A/V / WIRE ASM-A/V TO EXTERIOR TV (COIL ABOVE FLOOR)
00 000099 / -0-000 TO EXTERIOR TV (OIL OVE FLOOR) PIN HOUSING TO ELETRI STEP PIN HOUSING TO STEP OVER TO PSSENGER SWITHES ETIL F NTENN-TPMS W/ EXT LE 000090 / -0-000 SENSOR-WHEEL, TPMS 000090 / 0-0-000
More informationEASY DISC Assessment
EASY DISC Assessment Instrution: Selet the one most pproprite response for eh question. 1. In my work environment, it is most importnt to me... To help o-workers n to e in peeful environment. To feel tht
More informationOperation Manual. Sewing Machine. Product Code: 888-F42
Opertion Mnul Sewing Mhine Produt Code: 888-F42 Be sure to red this doument efore using the mhine. We reommend tht you keep this doument nery for future referene. INTRODUCTION INTRODUCTION Thnk you for
More information510 Series Color Jetprinter
510 Series Color Jetprinter User s Guide for Windows Setup trouleshooting A checklist to find solutions to common setup prolems. Printer overview Lern out the printer prts nd the printer softwre. Printing
More informationOperation Manual GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX. Easy Thread Cassette System
SE-BrotherE_sgml.ook Pge Mondy, June 30, 003 3:44 PM GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX CPS5XV[Y Esy Thred Cssette System Opertion Mnul Inluded Aessories After opening the
More information2 PIN HSG TO WIRE ASM-ROOF DA BA PANEL ASM-CLOSEOUT,ELECT / CHT SCREW G U (6) DOOR ASM CHT SCREW G U (6)
P SPEKER -0-HT () G-0-0U () SPEKER 9-0-000 () G-0-0U () P MPLIFIER-PREMIUM UIO 000090 / -0-000 WIRE SM-MP 9-0-000 9-0-000 FSTENER-UL LOK -0-000 (0 MM)() -0-000 (0 MM)() PIN HSG TO WIRE SM-ROOF PIN HSG
More informationIMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.
More informationQ tomography towards true amplitude image and improve sub-karst image Yang He and Jun Cai, TGS
Q tomogrphy towrs true mplitue imge n improve su-krst imge Yng He n Jun Ci, TGS Summry A frequeny omin tomogrphi inversion ws evelope to estimte frequeny epenent energy ttenution y using prestk epth migrtion
More informationIMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.
More informationPatterns and Algebra
Student Book Series D Mthletis Instnt Workooks Copyright Series D Contents Topi Ptterns nd funtions identifying nd reting ptterns skip ounting ompleting nd desriing ptterns numer ptterns in tles growing
More informationWIRING INSTL-BODY,110V. 1 OF / Sep J NOTES: (BLU) 2400 DROP FROM GFI GALLEY TO EXT RCP
RWING NO. FETURE 009- J 009- J PNEL-LOSEOUT 0-0-HT G9-0-U () E 00 ROP GFI GLLEY TO EXT RP PNEL-LOSEOUT 9-0-HT G9-0-U () MIN TO LO ENTER LMP 09-0-000 () G-0-0U () TH GFI (WHT) LO ENTER TO RER TH RP- EXTERIOR
More informationCage your cat! Assembly guide
Text type: Proeure Cge your t! WorFlyers Assemly guie The Ct Cue The purr-fet ple for your feline frien! Insie the omplete Ct Cue, your t will e sfe from ny unwnte guests or wether, while still enjoying
More informationSAMPLE. End of term: TEST A. Year 4. Name Class Date. Complete the missing numbers in the sequences below.
End of term: TEST A You will need penil nd ruler. Yer Nme Clss Dte 2 Complete the missing numers in the sequenes elow. 50 25 00 75 8 30 3 28 2 9 Put irle round two of the shpes elow whih hve 3 shded. 3
More informationMECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS
MECHNICL RF STT FOR GREENSTR HE, SiII & i JUNIOR MODELS INSTRUCTION MNUL FITTING & OPERTING INSTRUCTIONS CONTCT INFORMTION MNUL INFORMTION WORCESTER OSCH: TECHNICL: 08705 4 SERVICE: 08547 50 SPRES: 0905
More informationOperation Manual. Read before use. Read when additional information is required. GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX
GETTING READY Red efore use. SEWING BASICS UTILITY STITCHES Red when dditionl informtion is required. APPENDIX Computerized Sewing Mhine Produt Code: 885-U24 Opertion Mnul IMPORTANT SAFETY INSTRUCTIONS
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More informationANTENNA-TPMS W/ EXT CABLE / SENSOR-WHEEL, TPMS / (8) 84 TO GROUND BAR
00 00 PIN HOUSING TO ELETRI STEP K,MP TO STEP SWITH PIN HOUSING TO STEP OVER 0 PIN HOUSING TO GENERTOR OIL 000 MM OF WIRE SM-HSSIS TO GENERTOR, GENERTOR STRTER LE, GENERTOR GROUN LE, & LE SM-GENERTOR HERE
More informationIMPORTANT SAFETY INSTRUCTIONS
INTRODUCTION INTRODUCTION Thnk you for purhsing this mhine. Before using this mhine, refully red the IMPORTANT SAFETY INSTRUCTIONS, nd then study this mnul for the orret opertion of the vrious funtions.
More informationIntroduction 6 Basics 8 Projects 26. Stitching terms 94. About the author 95
Contents Klmh Books 21027 Crossros Cirle Wukesh, Wisonsin 53186 www.klmh.om/books 2010 Lesley Weiss All rights reserve. Exept for rief exerpts for review, this ook my not e reproue in prt or in whole y
More informationREMOTE IR/LED MODULE REMOTE 3 REVISION HISTORY C DETAIL A SCALE 1 : 1.5 I\O PANEL - SHEET 1 OF 6 ECO ZONE REV. DESCRIPTION DATE APPR'D
00000 ISION HISTORY EO ZONE. ESRIPTION TE PPR'. 9...0 IR 0 0.. LE INITOR LNSPE WLL MOUNT HNGERS REMOTE IR/LE MOULE REMOTE. 0 PORTRIT WLL MOUNT HNGERS SERVIE PNEL KEEP PERFORTE RES LER FOR IRFLOW. 9..0..
More informationR O M CARGO COVER / HOSE BED COVER HORIZONTAL SHUTTER
R O M RGO OVER / HOSE E OVER HORIZONTL SHUTTER PRTS MNUL FM-.- Rev 0-0- Safe Fleet Toll: 00-- 00 East rd Street Phone: --000 elton, Missouri 0 orders@romcorp.com Fax: --00 FM-.- / Rev / 0-0- RGO OVER /
More informationEnglish Printed in Taiwan XG
COVER 1-4 C M Y K English Printed in Tiwn XG0091-001 Congrtultions on choosing our product! Thnk you very much for purchsing our product. To otin the est performnce from this device nd to ensure sfe nd
More informationOperation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine
GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Opertion Mnul Computerized Sewing Mhine Importnt Sfety Instrutions Plese red these sfety instrutions efore ttempting to use the mhine. This mhine is
More informationWIRING INSTL-BODY,110V ITEM/PART NO: 1 OF / REF:
FROM GENERTOR PNEL-STL,ESS,ELE 00000 / 9-0-HT G9-0-U () G-0-U () MIN PNEL-STL,LOSEOUT,ELET 00000 / 90-0-HT G9-0-U () PNEL-STL,LOSEOUT 0000 / 9-0-HT G9-0-U () TS G9-0-U () LMP 09-0-000 () G-0-U () ROUTE
More informationB PANEL-CLOSEOUT CHT
INPUT ONNETIONS UX PORTLE STELLITE ISH MIN PORTLE STELLITE ISH LE PLTE-WLL, TRIPLE OX 00090 / -0-HT G9-0-0U () PIN HSG FROM WIRE SM-HSSIS IRUITS:Y Z,R,U PIN HSG FROM WIRE SM-HSSIS IRUIT:J PIN HSG FROM
More informationOperation Manual Sewing Machine
Opertion Mnul Sewing Mhine Produt Code: 888-S33/S36 KNOWING YOUR SEWING MACHINE SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this doument efore using the mhine. We reommend tht you keep this
More informationPRODUCT MANUAL IDLE TIMER ETR CONTROLLER 12/24 V. Part No
PROUT MNUL ILE TIMER ETR ONTROLLER 2/24 V Part No. 450 ISLIMER opyright Remote ontrol Technologies Pty Ltd (RT) ll rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted
More informationLEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts
More informationOperation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V14
GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX Be sure to red this doument efore using the mhine. We reommend tht you keep this doument nery for future referene. Opertion Mnul Computerized Sewing
More informationCopyright 2015 Winnebago Industries, Inc.
anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.
More information1 tray of toffee 1 bar of toffee. 10 In the decimal number, 0 7, the 7 refers to 7 tenths or
Chpter 3 Deciml Numers Do you know wht DECIMAL is? In chpter, we delt with units, s, 0 s nd 00 s. When you tke single unit nd divide it into (or 0 or 00) its, wht we then hve re deciml frctions of whole
More informationBasic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS...
Chpter 5 Bsic Emroidery BEFORE EMBROIDERING... 196 Emroidery Step y Step...196 Attching Emroidery Foot W+ with LED pointer...197 Attching the Emroidery Unit...197 Aout the Emroidery Unit... 197 Removing
More informationLORING THE SMARTER WAY TO ROAST PROPRIETARY ITEM:
TLE, MXIMUM WEIGHTS, L (KG) ROSTER (9) JOS TUING + (9.) GREEN EN RT + (.) EXHUST STK VENT UTO HOPPER.9.. 9.. ZONE TRIER UTO ISHRGE OOR PPROVE J HUTTON. 0....0 9. WLL TO. 0..0 0. REOMMENE LERNE.0. REOMMENE
More informationResistors, Current and Voltage measurements, Ohm s law, Kirchhoff s first and second law. Kirchhoff s first Objectives:
EE -050 Ciruit L Experiment # esistors, Current nd Voltge mesurements, Ohm s lw, Kirhhoff s first nd seond lw. Kirhhoff s first Ojetives: Slmn in Adul Aziz University Eletril Engineering Deprtment. Fmiliriztion
More informationM O T I O N A S S Y 7
THE INFORMTION ONTINE IN THIS RWING IS THE SOLE PROPERTY OF GLOL VR, IN. N NY REPROUTION IN PRT OR WHOLE WITHOUT THE WRITTEN PERMISSION OF GLOL VR, IN. IS PROHIITE. M O T I O N S S Y 0 0 POSITION FL LIGHT
More informationFOMA M702iG Manual for Data Communication
FOMA M702iG Mnul for Dt Communiction Dt Communictions... 1 Before Using... 2 Prepring for Dt Communiction... 3 Instlling the Communiction Configurtion Files (Drivers)... 4 Connecting the FOMA Hndset nd
More information660 Freestyle/Style Door with Double In-Line Panels
660 Freestyle/Style Door with Doule In-Line Pnels (CUH or MG) Style Series Option M Metl HK87 Slide MGNTIC PULL HNDL KIT with Mgnet Vinyl 989 MGNTIC DOOR STOP 716 HDR / SILL INSRT O V678 VINYL DOOR SL
More informationMATKI ONE MOSR- RECESS SLIDER
MATKI ONE MOSR- RECESS SLIDER INSTALLATION PARTS LIST MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454 388 EMAIL: techsupport@mtki.co.uk 094AF 04/6 MOSR RH
More information1 OF / Aug-2018
-PIN HSG SM-HSSIS IRUITS Y,Z,R,U -PIN HSG SM-HSSIS IRUIT J -PIN HSG SM-HSSIS IRUITS W,X,M,N -PIN HSG FROM FRONT LEFT ROOM RER MOTOR ETIL -PIN HSG FROM FRONT LEFT ROOM FRONT MOTOR -PIN HSG SM-HSSIS IRUITS
More informationANTENNA-TPMS W/ EXT CABLE / SENSOR-WHEEL, TPMS / (6) CODES/STANDARDS-CSA/CMVSS CABLE ASM (GRN)
00 PIN HOUSING TO ELETRI STEP LE SM (LU) FROM ISOLTE STU IN RER HSSIS REKER PNEL TO LEVEL SYSTEM PUMP F LE SM (LK) GENERTOR GROUN FROM GENERTOR GROUN STU TO LEVEL SYSTEM GROUN STU TO PSSENGER SWITHES ETIL
More informationFlow Divider / Combiner Cartridge Valves
Flow Divier / Cominer Vlves Type Pge Divier 8 Divier / Cominer, Close Center 8 Synhronizing Divier / Cominer 8 High Divier / Cominer, Close Center 85 US Shortut Ctlogue #999-901- 81 Flow Divier / Cominer
More informationInstaller and user reference guide
Instller n user reerene guie Air-oole rerigertion onensing unit LRMEQ3BY1 LRMEQ4BY1 LRLEQ3BY1 LRLEQ4BY1 Instller n user reerene guie Air-oole rerigertion onensing unit English Tle o ontents Tle o ontents
More informationMcAfee Network Security Platform
NS9300XC Sensor Quik Strt Guide Revision A MAfee Network Seurity Pltform This Quik Strt Guide explins how to quikly set up nd tivte your MAfee Network Seurity Pltform NS9300XC Sensor to e lod lned y MAfee
More information1 OF / Sep-2017
SWITH-RIN PUMP 0-09-000 TUTOR 0-0-HT INPUT ONNETIONS PORTLE STELLITE ISH LE PLTE-WLL, UL OX 9-0-HT G9-0-0U () OVER-ELETRIL 99-0-HT () LEL-SLIE 099-09-000 () G9-0-U () VIEW WIRE SM-UX HOLING TNK -0-000
More informationSWITCH-LP SHUTOFF ACTUATOR CHT WIRE ASM-MAIN HOLDING TANK WIRE ASM-TANK HEATER TO TANK HEATER PADS GND PWR
SWITH-RIN PUMP 0-09-000 TUTOR 0--HT IRUITS,JG PORT-SOLR,SINGLE 9-0-000 G9-0-U () ETIL OR SWITH-LP SHUTOFF 0-0-000 TUTOR 0-0-HT WTER PUMP PLTE-OX 9-0-HT G9-0-0U () WIRE SM-MIN HOLING TNK -0-000 SWITH-WTER
More informationMITSUBISHI MITSUBISHI Industrial Sewing Machine
ITSUISHI ITSUISHI Industrial Sewing achine XE500Y OTROL PEL Technical Information VE EVER VIG ITSUISHI ELETRI Thank you for choosing the XE500Y control panel. efore using this control panel, please read
More informationProbability and Statistics P(A) Mathletics Instant Workbooks. Copyright
Proility nd Sttistis Student Book - Series K- P(A) Mthletis Instnt Workooks Copyright Student Book - Series K Contents Topis Topi - Review of simple proility Topi - Tree digrms Topi - Proility trees Topi
More informationCONTROL-SLIDEOUT,IN-WALL SCREW G U (4) DETAIL GA SCREW G U (4) DETAIL GB 2 PIN HOUSING TO WATER PUMP A 3 2 PIN HOUSING
ONTROL-SLIEOUT,IN-WLL 900-0-000 G-0-U () ETIL G -WTER PUMP 0--HT TUTOR 0-0-HT IRUITS G,J,F,JS,JY PLTE-WLL,UL OX 9-0-HT G9-0-0U () OVER-ELETRIL 99-0-HT () LEL-SLIEOUT 099-09-000 () PIN HOUSING TO WIRE SM-UX
More informationMath Circles Finite Automata Question Sheet 3 (Solutions)
Mth Circles Finite Automt Question Sheet 3 (Solutions) Nickols Rollick nrollick@uwterloo.c Novemer 2, 28 Note: These solutions my give you the nswers to ll the prolems, ut they usully won t tell you how
More informationTEE-STL BLK 1/2" (SCH 80) TEE-STL BLK 1/2" REGULATOR-TWO STAGE REGULATOR-TWO STAGE
RELESE TE WG 00-0-000 PIPE-STL LK /" (SH 0) ZONE ISION REOR TE FTR-ORIG 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" (SH 0) 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" 00-0-000 PIPE-STL
More informationWIRING INSTL-BODY,12V. 1 OF / Sep-2016 NOTES: PLATE-WALL, DUAL COAX CHT SCREW G U (2)
INPUT PLTE-WLL, UL OX 9-0-HT G9-0-0U () PNEL-SERVIE -0-HT VIEW -PIN HSG IRUITS Y,Z R,U ONTROL-SLIEOUT,IN-WLL FRONT LEFT 900-0-000 G9-0-U () -PIN HSG IRUITS LLL,LLK WIRE SM-UX HOLING TNK -0-000 PIN HOUSING
More informationOperation Manual. Addendum. Embroidery Machine. Product Code: 884-T13
Emroidery Mchine Opertion Mnul Addendum Product Code: 884-T13 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. ABOUT THIS MANUAL ABOUT
More information