Features. Compliance. Applications. Warranty: GigaTech Branded Cables- Lifetime Warranty
|
|
|
- Tyler York
- 6 years ago
- Views:
Transcription
1 The GigaTech Products direct attach copper cables are based on the 10G Ethernet IEEE 802.3ae standard and are programmed to be fully compatible and functional with all intended Arista switching devices. The passive design has no signal amplification. The passive SFP+ cable is a low cost alternative for short reach application. Features Up to 11 GBd bi-directional data links Hot-pluggable SFP+ footprint AC coupled inputs and outputs 100 Ohm differential impedance Enhanced EMI design Single power supply 3.3V Operating temperature range: 0 to 70 Compliance MSA SFF G FC RoHS Compliant Applications 10GBASE Ethernet 10GB Fiber Channel Serial Data Transmission Warranty: GigaTech Branded Cables- Lifetime Warranty
2 Part Numbers Part Number AWG Description CAB-SFP-SFP-50CM-GT 30 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 50CM CAB-SFP-SFP-1M-GT 30 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 1M CAB-SFP-SFP-1.5M-GT 30 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 1.5M CAB-SFP-SFP-2M-GT 30 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 2M CAB-SFP-SFP-2.5M-GT 30 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 2.5M CAB-SFP-SFP-3M-GT 30 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 3M CAB-SFP-SFP-4M-GT 24 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 4M CAB-SFP-SFP-5M-GT 24 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 5M CAB-SFP-SFP-7M-GT 24 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 7M CAB-SFP-SFP-10M-GT 24 10GBASE-CR SFP+ Twinax Cable Arista Compatible- 10M General Specifications Parameter Symbol Min Typ Max Unit Remarks Data Rate DR GBd IEEE 802.3ae Bit Error Rate BER Input Voltage VCC V Maximum Voltage Vmax V Electric Power Interface Supply Current Is 4 ma Electric Power Interface Operating Temperature Top 0 70 Case Temperature Storage Temperature Tsto Ambient Temperature Cable Mechanical Specifications Parameter Symbol Min Typ Max Unit Remarks Time Delay Skew TDS 100 Ps/10M Cable Time Delay TD 4.3 ns/m Cable Insertion Loss LO 10 db/10m Cable Impedance ZC Ohm Dimensions ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED UNIT: mm
3 Block Diagram of Transceiver PCB Layout Recommendation
4 Electrical Pad Layout
5 Pin Assignment PIN # Symbol Description Remarks 1 VEET Transmitter ground (common with receiver 2 TFAULT Transmitter Fault 3 TDIS Transmitter Disable. Laser output disable on high or open Circuit ground is isolated Disabled: TDIS>2V or open Enabled: TDIS<0.8V 4 SDA Data line for serial ID Should Be pulled up with 5 SCL Clock line for serial ID 6 MOD_ABS Module Absent. Ground within the module 7 RS0 No Connection required 8 LOS Loss of Signal indication. Logic 0 indicates normal operation 4.7k 10k ohm on host board to a voltage between 2V and 3.6V LOS is open collector output 9 RS1 +3.3V Power Supply Circuit ground is isolated 10 VEER Receiver ground (common with transmitter 11 VEER Receiver ground (common with transmitter 12 RD- Receiver Inverted DATA out. AC coupled 13 RD+ Receiver Non-inverted DATA out. AC coupled 14 VEER Receiver ground (common with transmitter Circuit ground is isolated 15 VCCR Receiver power supply 16 VCCT Transmitter power supply Same as Pin# 1 17 VEET Transmitter ground (common with receiver 18 TD+ Transmitter Non-inverted DATA out. AC coupled 19 TD- Transmitter Inverted DATA out. AC coupled 20 VEET Transmitter ground (common with receiver References 1. IEEE standard 802.3ae. IEEE Standard Department, Enhanced 8.5 and 10 Gigabit Small Form Factor Pluggable Module SFP+ SFF-8431 Circuit ground is connected to chassis ground Circuit ground is connected to chassis ground
Features. Compliance. Applications. Warranty: GigaTech Branded Cables- Lifetime Warranty
The GigaTech Products direct attach copper cables are based on the 10G Ethernet IEEE 802.3ae standard and are programmed to be fully compatible and functional with all intended Cisco/EMC switching devices.
Features. Compliance. Applications. Warranty: GigaTech Branded Cables- Lifetime Warranty. SFP-10G-AOCxM-GT 10GBASE-AOC SFP+ Cable Cisco Compatible- xm
The GigaTech Products SFP-10G-AOCxM-GT is programmed to be fully compatible and functional with all intended Cisco switching devices. These active optical cables are designed to meet the SFP+ 10Gbs SFF-8431
Features: Compliance: Applications. Warranty: AH-ACC-SFP-1G-T-GT Gigabit Ethernet SFP Module TX 10/100/1000Mbps Aerohive Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended AEROHIVE switching devices. This SFP module is based on the Gigabit Ethernet IEEE 802.3 and 1000Base-T standard
Features: Compliance: Applications. Warranty: MGBS-GLX10-GT 1 Port Mini GBIC LX SMF Transceiver Amer Networks Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended AMER NETWORKS switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 standard
Features: Compliance: Applications: Warranty: QFX-SFP-10GE-LR-GT SFP+ 10GBASE-LR 10GB 1310nm 10km Juniper QFX Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended JUNIPER switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed
Features: Compliance: Applications: Warranty: XBR GT 16G FC LWL 10KM SFP+ (8 Pack) Brocade Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended Brocade switching devices. This SFP module is based on the 16G Fiber Channel standard and is designed to be compliant
Features: Compliance: Applications. Warranty: S-35LC20D-GT SFP 1.25G 20km T1310nm/R1550nm MikroTik Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended MIKROTIK/ROUTERBOARD switching devices. This SFP optical transceiver is designed for IEEE 802.3 Gigabit Ethernet
SRX-SFPP-10G-SR-ET-GT
The GigaTech Products is programmed to be fully compatible and functional with all intended Juniper switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE 802.3 and 1X/2X
Features: Compliance: Applications. Warranty: NTTP03CF-GT OC-48/STM-16 IR1/S nm XCT Enhanced SFP Module Nortel Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended AVAYA / NORTEL OPTERA switching devices. This SFP optical transceiver is based on the ATM/SONET/SONET standard
Parameter Symbol Min Typ Max Unit Remarks Data Rate DR GBd IEEE 802.3ae Bit Error Rate BER Input Voltage V CC
SFP-10G-ER The SFP-10G-ER is programmed to be fully compatible and functional with all intended CISCO switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed
Parameter Fiber Type Modal 850nm (MHz-km) Distance Range (m) 62.5/125um MMF /125um MMF
SFP-10G-SR-GT SFP-10G-SR-GT is programmed to be fully compatible and functional with all intended Cisco switching devices. This SFP module is based on the 10G Ethernet IEEE 802.3ae standard and is designed
Features: Compliance: Applications. Warranty: E1MG-CWDM GT CWDM SFP Optic, 80KM, 1550nm, LC Connector Brocade Compatible
The GigaTech Products is programmed to be fully compatible and functional with all intended BROCADE NETWORKING CWDM switching devices. This SFP optical transceiver is based on the Gigabit Ethernet IEEE
Parameter Symbol Min Typ Max Unit Remarks Data Rate DR 1.25 GBd IEEE Bit Error Rate BER Input Voltage V CC
GLC-BX-U The GLC-BX-U is programmed to be fully compatible and functional with all intended Cisco Series switching devices. This SFP optical transceiver is designed for IEEE 802.3 Gigabit Ethernet interconnects
SO-SFP-100Base-T. SFP, 125Mbps FE to 10/100Base-T convert SO-SFP-100BASE-T OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION DATASHEET 4.
SO-SFP-100BASE-T SFP, 125Mbps FE to 10/100Base-T convert SO-SFP-100BASE-T OVERVIEW The SO-SFP-100Base-T is a single-mode transceiver in small form-factor pluggable module for duplex optical data communications.
SFP-10G-SR Specifications, R01. SFP-10G-SR-OEM 10GBd SFP+ Short Wavelength (850nm) Transceiver
SFP-10G-SR-OEM 10GBd SFP+ Short Wavelength (850nm) Transceiver Up to 10.5 GBd bi-directional data links Compliant with IEEE 802.3ae 10GBASE-SR/SW Compliant with SFF8431 Hot-pluggable SFP+ footprint 850nm
PROLABS QSFP-4x10G-AC7M-C QSFP+ to 4 SFP+ Active Copper Cable Assembly
PROLABS QSFP-4x10G-AC7M-C QSFP+ to 4 SFP+ Active Copper Cable Assembly QSFP-4x10G-AC7M-C Overview PROLABS s QSFP-4x10G-AC7M-C QSFP+ (Quad Small Form-factor Pluggable Plus) to 4 SFP+ Active Copper are suitable
CFORTH-QSFP/4SFP+-CUxM Specifications Rev. D00C
Preliminary DATA SHEET CFORTH-QSFP/4SFP+-CUxM QSFP+ to 4 SFP+ Passive Copper Cable Assembly CFORTH-QSFP/4SFP+-CUxM Overview CFORTH-QSFP/4SFP+-CUxM QSFP+ (Quad Small Form-factor Pluggable Plus) to 4 SFP+
SFP-SW10100-R-TP 10/100/1000 BASE-T Copper SFP Transceiver
SFP-SW10100-R-TP 10/100/1000 BASE-T Copper SFP Transceiver PRODUCT FEATURES Up to 1.25 Gb/s bi-directional data links Hot-pluggable SFP footprint Low power dissipation(1.05w typical) Compact RJ-45 assembly
1000BASE-T Copper SFP Transceiver
PRODUCT FEATURES Up to 1.25 Gb/s bi-directional data links Hot-pluggable SFP footprint Low power dissipation(1.05w typical) Compact RJ-45 assembly Fully metal enclosure, for lower EMI RoHS compliant and
10GBASE-T Copper SFP+ Transceiver SFP+-10GBASE-T
10GBASE-T Copper SFP+ Transceiver SFP+-10GBASE-T 1.PRODUCT FEATURES Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T Hot-pluggable SFP footprint Compact RJ-45 connector assembly RoHS compliant and
PT0-M3-4D33Q-I. Product Overview. Absolute Maximum Ratings.
Product Overview The of the Enhanced Small Form Factor Pluggable (SFP+) transceiver module is designed for high performance integrated data link over dual multi-mode optical fibers. The high-speed laser
TS-SF-T BASE-T Copper SFP Transceiver
PRODUCT FEATURES Up to 1.25 Gb/s bi-directional data links Hot-pluggable SFP footprint Low power dissipation(1.05w typical) Compact RJ-45 assembly Fully metal enclosure, for lower EMI RoHS compliant and
Features: Compliance: Applications. Warranty: WS-G5484-GT 1000Base-SX GBIC MMF Cisco Compatible
WS-G5484-GT The GigaTech Products WS-G5484-GT is programmed to be fully compatible and functional with all intended CISCO switching devices. This GBIC optical transceiver is based on the Gigabit Ethernet
MODULETEK DAC-QSFP10-QSFP10-A-M-xxAWG-aa.aaM-C0C0C QSFP+ to 4 SFP+ Active Copper Cable Assembly. DAC-QSFP10-QSFP10-A-M-xxAWG-aa.
DATA SHEET MODULETEK DAC-QSFP10-QSFP10-A-M-xxAWG-aa.aaM-C0C0C QSFP+ to 4 SFP+ Active Copper Cable Assembly DAC-QSFP10-QSFP10-A-M-xxAWG-aa.aaM-C0C0C Overview ModuleTeks DAC-QSFP10-QSFP10-A-M-xxAWG-aa.aaM-C0C0C
Product Specification
SFP-10GTX 10GBASE T SFP+ Copper Transceiver Features Support 10Gbase T / 5Gbase T / 2.5Gbase T / 1000base T Hot pluggable SFP footprint Compact RJ 45 connector assembly RoHS compliant and lead free Single
1000BASE-T Copper SFP Transceiver
000BASE-T Copper SFP Transceiver Product Overview STC-0003 000BASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit
CFORTH-QSFP/4SFP+-AOCxM Specifications Rev. D00A. Product Features
Preliminary DATA SHEET CFORTH-QSFP/4SFP+-AOCxM 40Gb/s QSFP+ to 4xSFP+ Active Optical Cable Transceiver CFORTH-QSFP/4SFP+-AOCxM Overview CFORTH-QSFP/4SFP+-AOCxM QSFP+ to 4xSFP+ active optical cable transceivers
LEG. 10Gbs SFP+ Transceiver
Part# 39719 430-4909-LEG DELL COMPATIBLE 10GBASE-LRM SFP+ MMF 1310NM 220M REACH LC DOM 430-4909-LEG 10Gbs SFP+ Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent
10Gbps 1550nm 80KM SFP+ Optical Transceiver
10Gbps 1550nm 80KM SFP+ Optical Transceiver Model: JFSP5592-3LCD80 Size (mm): 58.4*13.9*12.6 Features Hot pluggable 1550nm cooled EML, APD Receiver Up to 80km on 9/125um SMF SFP+ MSA package with duplex
PROLABS SFP-10G-LR-C 10GBd SFP+ LR Transceiver
PROLABS SFP-10G-LR-C 10GBd SFP+ LR Transceiver SFP-10G-LR-C Overview PROLABS s SFP-10G-LR-C SFP+ optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF 8431 standard, and provide
PROLABS J9150A-C 10GBd SFP+ Short Wavelength (850nm) Transceiver
PROLABS J9150A-C 10GBd SFP+ Short Wavelength (850nm) Transceiver J9150A-C Overview PROLABS s J9150A-C SFP optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF 8431 standard, and
PROLABS EX-SFP-10GE-LR-C
PROLABS EX-SFP-10GE-LR-C 10GBd SFP+ LR Transceiver EX-SFP-10GE-LR-C Overview PROLABS s EX-SFP-10GE-LR-C SFP+ optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF 8431 standard,
10GBd SFP+ LR Long Wavelength (1310nm) Transceiver
CFORTH-SFP+-10G-LR Specifications Rev. Preliminary DATA SHEET CFORTH-SFP+-10G-LR 10GBd SFP+ LR Long Wavelength (1310nm) Transceiver CFORTH-SFP+-10G-LR Overview CFORTH-SFP+-10G-LR SFP+ optical transceivers
Product Specification. RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL
Product Specification RoHS-6 Compliant 10Gb/s 10km 1310nm Single Mode Datacom SFP+ Transceiver FTLX1475D3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.83 to 10.5Gb/s bit rates Power dissipation
10Gb/s DWDM Single-mode SFP+ Transceiver
Product Specification SFP+ DWDM 10G-ER 40km LC 10Gb/s DWDM Single-mode SFP+ Transceiver 1. Product Features Duplex LC connector Compliant with SFP+ MSA Compliant to 802.3ae 10GBASE-ER Compliant to SFP+
PROLABS GP-10GSFP-1S-C 10GBd SFP+ Short Wavelength (850nm) Transceiver
PROLABS GP-10GSFP-1S-C 10GBd SFP+ Short Wavelength (850nm) Transceiver GP-10GSFP-1S-C Overview PROLABS s GP-10GSFP-1S-C SFP optical transceivers are based on 10G Ethernet IEEE 802.3ae standard and SFF
SFP- GE- RJ45- AO. 1.25Gbps SFP Copper Transceiver
SFP- GE- RJ45- AO ZTE 1000BASE- TX SFP COPPER 100M REACH RJ- 45 SFP- GE- RJ45- AO 1.25Gbps SFP Copper Transceiver Features Up to 1.25Gb/s bi- directional data links Hot- pluggable SFP footprint Extended
AXM762-A AXM762-A. Features. Up to 11.1Gbps Data Links. Up to 10km transmission on SMF. DBF Laser and PIN receiver. Metal enclosure, for lower EMI
10GBASE, SFP+, LR Transceiver Features Up to 11.1Gbps Data Links Up to 10km transmission on SMF DBF Laser and PIN receiver Metal enclosure, for lower EMI 2-wire interface with integrated Digital Diagnostic
CL-SFP-E100 Fiber optic/ electrical Transceiver and Fast Ethernet to E1 MSA ( Multi-Source Agreement) compliance. Features: Application
Features: Ethernet Over PDH WAN link Single unframed E1 support Effective transport of broadband traffic HDLC Encapsulation/De-capsulation Protocol Hot-pluggable SFP footprint Low power dissipation(1.35w
JD061A-C. 1.25Gbps SFP Transceiver
JD061A-C HP 1000Base-EX SFP SMF 1310nm, 40km Reach, LC JD061A-C 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1310nm FP Laser transmitter RoHS
SFP 4.25G 850nm Multi mode Optical Transceiver
SFP 4.25G 850nm Multi mode Description The BlueOptics SFP transceiver is a high performance, cost effective module supporting a data rate up to 4.25Gbps with 550 Meter link length on multi mode fiber.
PROLABS SFP-H10GB-ACUXM
PROLABS SFP-H10GB-ACUXM M 11GBd Active Copper SFP+ (Small Form Pluggable) Transceiver Key Features Up to 11 GBd bi-directional data links 24AWG through 30 AWG cable available Dual SFP+ Connectors Industry
PRODUCT FEATURES APPLICATIONS. Pin Assignment: 1 Gigabit Long-Wavelength SFP Transceiver SFP-SX-MM
1 Gigabit Long-Wavelength SFP Transceiver SFP-SX-MM PRODUCT FEATURES Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions 850nm VCSEL laser transmitter
XFP-10GLR-OC192SR-C. 10 Gigabit XFP Transceiver, LC Connectors, 1310nm, SingleMode Fiber 10km
PROLABS XFP-10GLR-OC192SR-C 10 Gigabit 1310nm SingleMode XFP Optical Transceiver XFP-10GLR-OC192SR-C Overview ProLabs s XFP-10GLR-OC192SR-C 10 GBd XFP optical transceivers are designed for the IEEE 802.3ae
PROLABS JD121B-C. 10 Gigabit 1550nm SingleMode XFP Optical Transceiver, 40km Reach.
PROLABS JD121B-C 10 Gigabit 1550nm SingleMode XFP Optical Transceiver, 40km Reach. JD121B-C Overview PROLABS s JD121B-C 10 GBd XFP optical transceivers are designed for the IEEE 802.3ae 10GBASE-ER, 10GBASE-
10GBd SFP+ Short Wavelength (850nm) Transceiver
Preliminary DATA SHEET CFORTH-SFP+-10G-SR 10GBd SFP+ Short Wavelength (850nm) Transceiver CFORTH-SFP+-10G-SR Overview CFORTH-SFP+-10G-SR SFP optical transceivers are based on 10G Ethernet IEEE 802.3ae
Product Features. Applications. Standards Compliance. 10G SFP+ LR Transceiver. General Description
General Description Accelight ASP10I-LR is designed for use in 10 Gb/s links over single mode fibers(smf). It is compliant with the SFP+ MSA and industry standard SFF-8472. The module incorporates a 1310nm
LEG. 10Gbps SFP+ Transceiver
430-4585-LEG DELL 10GBASE-ER SFP+ SMF 1550NM 40KM REACH LC DOM 430-4585-LEG 10Gbps SFP+ Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent ESD protection RoHS
AA C 1000BASE-CWDM, Small Form-factor Pluggable (SFP), 1.25Gb/s data rate, 1590nm wavelength, 70Km reach
AA1419039-C 1000BASE-CWDM, Small Form-factor Pluggable (SFP), 1.25Gb/s data rate, 1590nm wavelength, 70Km reach FEATURES Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint 8 CWDM Wavelength
SFP-10G-SR-LEG. 10Gbs SFP+ Transceiver
SFP-10G-SR-LEG CISCO 10GBASE-SR SFP+ MMF 850NM 300M REACH LC DOM SFP-10G-SR-LEG 10Gbs SFP+ Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent ESD protection VCSEL
Part Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS
Product Features Compliant with IEEE Std 802.3-2005 10G Ethernet 10GBase-LR/LW Electrical interface specifications per SFF-8431 Management interface specifications per SFF-8431 and SFF-8472 SFP+ MSA package
GLC-SX-MM-LEG. 1.25Gbps SFP Transceiver
GLC-SX-MM-LEG CISCO 1000BASE-SX SFP MMF 850NM 550M REACH LC GLC-SX-MM-LEG 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 850nm VCSEL Laser transmitter
SFP+ Copper 10GBase-T SL-SFP-10G-T
SFP+ Copper 10GBase-T SL-SFP-10G-T Overview SFP+ 10G copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed
XBR C. 8Gbs SFP+ Transceiver
XBR-000153-C Brocade 8GBase-LR SFP+ SMF 1310nm, 10km Reach, LC XBR-000153-C 8Gbs SFP+ Transceiver Features Duplex LC connector Support hot-pluggable Metal with lower EMI Excellent ESD protection DFB Transmitter
EMPOWERFIBER 10Gbps 300m SFP+ Optical Transceiver EPP SRC
EMPOWERFIBER 10Gbps 300m SFP+ Optical Transceiver EPP-85192-SRC Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 850nm VCSEL transmitter,
Gb/s 1310nm Single-mode SFP Transceiver
Page 1 33-4122 1.25Gb/s 1310nm Single-mode SFP Transceiver PRODUCT FEATURES Up to 1.25Gb/s data links FP laser transmitter and PIN photo-detector Up to 20km on 9/125µm SMF Hot-pluggable SFP footprint Duplex
SFP+ 16G 1310nm Single mode Optical Transceiver
SFP+ 16G 1310nm Single mode Description The BlueOptics SFP+ transceiver is a high performance, cost effective module supporting a datarate up to 14.025Gbps with 10 Kilometer link length on single mode
GLC-LH-SM-LEG-5PK. 1.25Gbps SFP Transceiver
39508 GLC-LH-SM-LEG-5PK CISCO 1000BASE-LX SFP SMF 1310NM 10KM REACH LC GLC-LH-SM-LEG-5PK 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1310nm
SFP CWDM 1.25G nm Single mode Optical Transceiver
SFP CWDM 1.25G 1270-1610nm Single mode Description The BlueOptics SFP transceiver is a high performance, cost effective module supporting a data rate up to 1.25Gbps with 40 Kilometer link length on single
Product Specification. RoHS-6 Compliant 10Gb/s Extended Temperature 10km Single Mode Datacom SFP+ Transceiver FTLX1471D3BNL
Product Specification RoHS-6 Compliant 10Gb/s Extended Temperature 10km Single Mode Datacom SFP+ Transceiver FTLX1471D3BNL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 9.95 to 10.5Gb/s bit rates
Product Specification. 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL APPLICATIONS
Product Specification 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver FTLX1672D3BTL PRODUCT FEATURES Hot-pluggable SFP+ footprint 8.5 through 11.3 Gb/s bit rates 40km link length -40/85 C case temperature
Product Specification Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLX1370W3BTL APPLICATIONS
Product Specification 9.8304 Gigabit RoHS Compliant Long-Wavelength SFP+ Transceiver FTLX1370W3BTL PRODUCT FEATURES Up to 9.8304 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital
MODULETEK SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver. SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview.
DATA SHEET MODULETEK SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview ModuleTek s SFP10-CWDM-DML-xxxx-20KM-15DB-D10 SFP+ CWDM 20km optical
XTS31U-10Lx. 10 G Ethernet 10 km SFP+ Transceiver 10GBASE-LR/10GBASE-LW. XTS31U-10Lx 10 G 10 km SFP+ Transceiver. Applications.
Applications 10G Ethernet 10GBASE-LR/LW 10G Fiber Channel 1200-SM-LL-L XTS31U-10Lx 10 G Ethernet 10 km SFP+ Transceiver 10GBASE-LR/10GBASE-LW Features Compliant with IEEE Std 802.3-2005 10G Ethernet 10GBase-LR/LW
APSB53123xxL20. Product Features. Applications. General. 1.25Gb/s BiDi SFP Transceiver
Up to 1.25Gb/s data links Single LC connector Hot-pluggable SFP footprint 1550nm DFB laser transmitter 1310nm InGaAs PIN receiver RoHS compliant and Lead Free Up to 20km on 9/125um SMF Metal enclosure
Features: Applications: Description:
Monolithic MZM Tunable TOSA APD Receiver Supports 50GHz ITU Grid C-Band with a wavelength locker Duplex LC connector Power supply voltages : +3.3V Temperature range 0 C to 70 C Power dissipation:
SFP-10G-LR-TX. Product Features. Applications. Product Selection. Cisco Compatible 10GBase-LR SFP TurboX
Product Features Duplex LC Connector Support hot-pluggable Metal with lower EMI Excellent ESD protection DFB Transmitter and PIN Receiver Distance up to 10Km on 9/125um SMF Single 3.3V power supply and
Prolabs SFP-10G-LRM. Datasheet: Transceivers. 10GBd SFP+ LRM Transceiver. Ordering Information. Introduction. Ordering Information SFP-10G-LRM
Prolabs SFP-10G-LRM 10GBd SFP+ LRM Transceiver Key Features Up to 10.5 GBd bi-directional data links Compliant with IEEE 802.3aq 10GBASE-LRM Compliant with SFF8431 Hot-pluggable SFP+ footprint 1310nm FP
QFX-SFP-10GE-SR (10G BASE-SR SFP+) Datasheet
QFX-SFP-10GE-SR (10G BASE-SR SFP+) Datasheet Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 850nm VCSEL transmitter, PIN photo-detector Maximum
XFP-10GER-192IR V Operating Environment Supply Voltage 1.8V V CC V Operating Environment Supply Current 1.8V I CC1.
XFP-10GER-192IR The XFP-10GER-192IRis programmed to be fully compatible and functional with all intended CISCO switching devices. This XFP optical transceiver is designed for IEEE 802.3ae 10GBASE-ER, 10GBASE-
Product Specification
Product Specification RoHS-6 Compliant 10Gb/s 10km Single Mode Bidirectional Datacom SFP+ Transceiver FTLX2071D327/FTLX2071D333 PRODUCT FEATURES Hot-pluggable SFP+ footprint Bidirectional 10G over single
SFP-1020-WA/B 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX
SFP-1020-WA/B 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Features Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
DATA SHEET. MODULETEK: SFP10-CWDM-DML-xxxx-20KM-15DB-D10. 10Gb/s SFP+ CWDM 20km Transceiver. SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview
DATA SHEET MODULETEK: SFP10-CWDM-DML-xxxx-20KM-15DB-D10 10Gb/s SFP+ CWDM 20km Transceiver SFP10-CWDM-DML-xxxx-20KM-15DB-D10 Overview ModuleTek s SFP10-CWDM-DML-xxxx-20KM-15DB-D10 SFP+ CWDM 20km optical
10GBASE-LR/LW SFP MSA SFF-8472 SFF-8431 SFF-8432 Compliant
APSPBxxB33CDL60 Product Features Single LC connector Hot-pluggable SFP footprint Uncooled DFB laser RoHS compliant and Lead Free Distance up to 60Km on 9/125um SMF Metal enclosure for lower EMI Power dissipation
GLC-LH-SM-TX. Product Features. Applications. General. Cisco Compatible 1000BASE-LX/LH SFP TurboX
Product Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1310nm FP laser transmitter RoHS compliant and Lead Free Up to 10km on 9/125um SMF Metal enclosure for lower EMI
SFP 1G 150km CWDM (1470~1610) Transceiver datasheet A-GEAR World Wide Manufacturing Product Specification 1. Featur es 2.
Product Specification 1. Features Up to 1.25Gb/s data links DFB laser transmitter and APD receiver Up to 160km on 9/125μm SMF Hot-pluggable SFP footprint Duplex LC/UPC type pluggable optical interface
Product Specification. RoHS-6 Compliant 10Gb/s 10km Single Mode Datacom SFP+ Transceiver FTLX1475D3BNV
Product Specification RoHS-6 Compliant 10Gb/s 10km Single Mode Datacom SFP+ Transceiver FTLX1475D3BNV PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports rate selectable 1.25Gb/s and 9.95 to 10.5Gb/s
XFP-10G-Z-OC192-LR2-C
PROLABS XFP-10G-Z-OC192-LR2-C 10 Gigabit 1550nm Single Mode XFP Optical Transceiver XFP-10G-Z-OC192-LR2-C Overview PROLABS s XFP-10G-Z-OC192-LR2-C 10 GBd XFP optical transceivers are designed for 10GBASE-ZR,
BCHP D-H3 10Gb/s 1310nm SFP+ 10km Transceiver
BCHP-1396-10D-H3 10Gb/s 1310nm SFP+ 10km Transceiver PRODUCT FEATURES Up to 11.1Gbps Data Links Up to 10km transmission on SMF DFB Laser and PIN receiver Metal enclosure, for lower EMI 2-wire interface
Product Specification. 10Gb/s 80km Single Mode SFP+ Transceiver FTLX1871D3BCL APPLICATIONS FTLX1871D3BCL
Product Specification 10Gb/s 80km Single Mode SFP+ Transceiver FTLX1871D3BCL PRODUCT FEATURES Hot-pluggable SFP+ footprint Supports 8.5 and 9.95 to 11.3 Gb/s 80km link length -5/70 C case temperature range
GLC-LH-SMD-AO. 1.25Gbps SFP Transceiver
GLC-LH-SMD-AO Cisco 1000Base-LX SFP SMF 1310nm, 10km Reach, LC, DOM www.addonnetworks.com GLC-LH-SMD-AO 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP
The Price Performance Leader in 100% Compatible Optical Transceivers
Part Number: CWDM-GBIC-1570 Quick Spec: Manufacturer Compatibility: Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: Digital Optical Mon. (DOM): Connector Type: Cisco GBIC
The Price Performance Leader in 100% Compatible Optical Transceivers
Part Number: CWDM-GBIC-1470 Quick Spec: Manufacturer Compatibility: Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: Digital Optical Mon. (DOM): Connector Type: Cisco GBIC
PROLABS GLC-T-C 1000BASE-T SFP (Small Form Pluggable) Copper Transceiver 3.3V, 1.25GBd Gigabit Ethernet
PROLABS GLC-T-C 1000BASE-T SFP (Small Form Pluggable) Copper Transceiver 3.3V, 1.25GBd Gigabit Ethernet GLC-T-C Overview PROLABS s GLC-T-C Copper SFP transceivers are based on Gigabit Ethernet IEEE 802.3
Features Gigabit Ethernet
Applicatios Gigabit Ethernet Ordering Information Features ü Up to 1.25Gb/s data links ü Single SC/LC connector ü Hot-pluggable SFP footprint ü 1550nm DFB laser transmitter ü RoHS compliant and Lead Free
SFP CWDM 1G 120km LC datasheet A-GEAR World Wide Manufacturing Product Specification
Product Specification 1.25Gb/s CWDM Single-mode SFP Transceiver 1. Product Features Up to 1.25Gb/s data links The DFB laser transmitter APD receiver Up to 120km on 9/125μm SMF Hot-pluggable SFP footprint
Product Specification
PRODUCT FEATURES Product Specification 25G SFPwire, SFP+ Active Optical Cable FCBG125SD1Cxx Hot-pluggable SFP+ cable ends Supports 25.7813 Gb/s bit rate SFI limiting interface Input equalization and output
The Price Performance Leader in 100% Compatible Optical Transceivers GBIC-GE-S40K Part Number: GBIC-GE-S40K PRODUCT FEATURES APPLICATIONS
Part Number: GBIC-GE-S40K Quick Spec: Manufacturer Compatibility: Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: Digital Optical Mon. (DOM): Connector Type: PRODUCT FEATURES
Part No. Data Rate Media type Distance
SFP+ Direct Attach: 1m, 2m, 3m RoHS6 Compliant Features Support Multi-Gigabit data rates up to 10.5Gbps Hot-pluggable SFP 20PIN footprint I/O Connector designed for high speed differential signal application
1000BASE-T SFP Copper Transceiver Hot Pluggable, Cat-5 UTP Cable, 100m
Mini-GBIC Module INEO-MD-MSFP-TE 1000BASE-T SFP Copper Transceiver Hot Pluggable, Cat-5 UTP Cable, 100m tactio TM s INEO-MD-MSFP-TE 1000BASE-T copper SFP transceiver is high performance, cost effective
Part Number Operating Case temperature DDMI. ESD to the Electrical PINs: compatible with MIL-STD-883 Method 3015
APSP31B33xDL10 Product Features Duplex LC connector Hot-pluggable SFP footprint Uncooled 1310nm DFB laser RoHS compliant and Lead Free Distance up to 10Km on 9/125um SMF Metal enclosure for lower EMI Power
PART NUMBER: SFPT-ZX8-01 PRODUCT FEATURES
PART NUMBER: SFPT-ZX8-01 PRODUCT FEATURES Up to 1.25Gb/s data links with DDM DFB laser transmitter and PIN photo-detector Up to 80km on 9/125µm SMF Hot-pluggable SFP footprint Duplex LC/UPC type pluggable
Parameter Minimum Maximum Units Supply voltage V Data input voltage V Control input voltage V
Features: Supporting 100 Gbps to 4 x 25 Gbps Support data rates : 25.78Gb/s (per channel) IEEE 802.3bj 100GEBASE-CR4 and P802.3by compliant Compatible to SFP28 MSA and QSFP28 MSA Compatible to SFF-8402,
Specifications. (Tc=-5 to 70 and Vcc= 3.14 to 3.46V) Nominal Wavelength λ nm Side Mode Suppression Ratio. Receiver
The 1550nm cooled EML laser based 10Gigabit SFP+ Transceiver is designed to transmit and receive serial optical data over single mode optical fiber with 80Km. They are compliant with SFF-8431,SFF-8432,
SO-SFP28-LR. SFP28, 25GBASE-LR, 1310nm, SM, DDM, 10km OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION DATASHEET 4.1
SO-SFP28-LR SFP28, 25GBASE-LR, 1310nm, SM, DDM, 10km OVERVIEW The SO-SFP28-LR is a 1310 nm DFB based 25Gigabit SFP28 transceiver. It is designed to transmit and receive optical data over 9/125μm single-mode
XTBxxA-20LY 10 Gbps SFP+ Bi-Directional Transceiver, 20 km Reach
XTBxxA-20LY 10 Gbps SFP+ Bi-Directional Transceiver, 20 km Reach 1270/1330 nm TX/1330/1270 nm RX Features: Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
SFP-1000BASE-LX-LEG. 1.25Gbps SFP Transceiver
SFP-1000BASE-LX-LEG 1000BASE-LX SFP SMF 1310NM 10KM REACH LC DOM SFP-1000BASE-LX-LEG 1.25Gbps SFP Transceiver Features Up to 1.25Gb/s data links Duplex LC connector Hot-pluggable SFP footprint 1310nm FP
10GBase LR-Lite SFP+ Optical Transceivers (I-Temp)
10GBase LR-Lite SFP+ Optical Transceivers (I-Temp) PRODUCT FEATURES Optical interface mainly follows IEEE 802.3ae 10GBASE-LR requirements except SMSR and link distance. Compliant with SFP+ MSA Data Rate:
GBP-XXXX192-L2C 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX
GBP-XXXX192-L2C 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Features Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
Part Number Wavelength Operating Case temperature. APCSP23B33CDL10 Tx-1270 / Rx-1330 Commercial. APCSP32B33CDL10 Tx-1330 / Rx-1270 Commercial
APCSPxxB33xDL10 Product Features Two Bi-Directional transceivers in one SFP package Up to 10.3125Gb/s data links Duplex LC connector Hot-pluggable SFP footprint Uncooled DFB laser transmitter RoHS compliant