Digital Temperature Controllers

Transcription

1 Digitl Temperture ontrollers /6, /8, nd /4 DIN Temperture ontrollers Join the Best-selling Series Models vilble with either temperture inputs or nlog inputs. A wide rnge of functions, such s three-phse heter burnout detection, two control outputs, mnul outputs, nd trnsfer outputs. Esy-to-red -segment disply. Fster smpling t 25 ms. Setting Tool port provided s stndrd feture for esy connection to personl computers. E5@N Series E5AN E5EN E5N /4 DIN /8 DIN /6 DIN ontents Digitl Temperture ontrollers E5N/E5N-U... 3 E5EN... 6 E5AN ommon to All ontrollers Opertion Precutions Digitl Temperture ontrollers E5@N

2 ALM ALM2 HA ALM3 OUT OUT2 STOP MW MANU ALM ALM2 ALM3 HA OUT STOP MANU Lineup E5N (48 48 mm) E5EN (48 96 mm) PV Pge 3 Pge 6 SV E5EN ontrollers with Temperture Inputs ontrollers with Anlog Inputs E5N-U Plug-in-type ontrollers (48 48 mm) Pge 3 ontrollers with Temperture Inputs No lrm outputs Two lrm outputs Two lrm outputs (including HB lrm) Two event inputs Two lrm outputs (including 3-phse HB lrm) RS-485 communictions Two control outputs Two lrm outputs (including HB lrm) Two lrm outputs (including HB lrm) ESB externl power supply Two lrm outputs Two event inputs ESB externl power supply No lrm outputs Two lrm outputs Two lrm outputs (including HB lrm) Two event inputs Two lrm outputs (including HB lrm) RS-485 communictions Two control outputs Two lrm outputs (including HB lrm) RS-485 communictions No lrm outputs One lrm output Two lrm outputs ontrollers with Temperture Inputs ontrollers with Anlog Inputs E5AN (96 96 mm) Pge 27 ontrollers with Temperture Inputs ontrollers with Anlog Inputs One lrm output Three lrm outputs (including 3-phse HB lrm) Two event inputs Three lrm outputs (including HB lrm) RS-485 communictions or RS-232 communictions Two control outputs Three lrm outputs (including HB lrm) Two event inputs Three lrm outputs Two event inputs ESB externl power supply Three lrm outputs (including HB lrm) Three lrm outputs (including HB lrm) Two event inputs OUT2 MW One lrm output Three lrm outputs (including 3-phse HB lrm) Two event inputs Three lrm outputs (including HB lrm) RS-485 communictions or RS-232 communictions Two control outputs Three lrm outputs Two event inputs Three lrm outputs (including HB lrm) Two event inputs PV SV E5AN 2 Digitl Temperture ontrollers E5@N

3 Digitl Temperture ontrollers E5N/E5N-U This Best-selling Generl-purpose mm Temperture ontroller Is Now Even Better. USB-Seril onversion ble nd Support Softwre Are Also Avilble. ontrollers now vilble with nlog inputs. Fster smpling t 25 ms. Trnsfer output provided for esy output to recorders. Voltge outputs (to drive SSRs) for both heting nd cooling control. n be used for lrms to provide three lrm outputs. Models vilble with three-phse heter burnout detection nd SSR fult detection. Esy setting with -segment displys. onnect to either thermocouple or pltinum resistnce thermometer with the sme model. Esily see the sttus from distnce with PV disply with threecolor switching function. Setting protection indictor informs opertor when protection is enbled. Mnul output provided. ontroller vilble with long-life rely output. Models vilble with externl power supply for ESB Infrred Thermosensor. Note: Refer to Precutions on pge 43. Fetures Note: Refer to pge 4 for informtion on chnges in comprison to previous models. Improved Functions for Wider Rnge of Appliction ontrol Anlog Vlues, such s Pressures, Flowrtes, nd Levels The E5N Series now lso includes models tht ccept nlog inputs, enbling control pplictions other thn for temperture, including pressure, flowrte, level, humidity, nd weight control. Note: E5N-@L (Models with Anlog Inputs) Fster Smpling t 25 ms The previous smpling time of 5 ms hs been reduced by hlf to 25 ms. This enbles the E5N to hndle ppliction requiring even greter response speed nd ccurcy. Esy onnector to Recorder A trnsfer output now mkes it esy to connect to recorder or PL Anlog I/O Unit. Note: E5N-@ (Models with urrent Outputs) E58-IFQ USB-Seril onversion ble for omputer onnection A personl computer connection is possible for models without communictions. The -Thermo Support Softwre (sold seprtely) cn be used to set prmeters, monitor opertion, nd prmeter msks. The free ThermoMini Prmeter opy Softwre cn be used to rech E5N prmeters using communictions nd copy them to nother E5N to increse onsite productivity. Specifictions: pge 7, Dimensions: pge 3 Voltge Outputs (to Drive SSRs) for Both Heting nd ooling ontrol. n Be Used for Alrms to Provide Three Alrm Outputs. Voltge outputs cn be used for both heting nd cooling for Models with Two ontrol Outputs. Also, control output 2 cn be set for use s n lrm output, to enble using up to three lrm outputs. Note: E5N-@Q (Option Bord) Three-phse Heter Burnout Detection With Models with Three-phse Heter Burnout nd SSR Filure Detection, two current trnsformers cn be connected to detect both heter burnout nd SSR filure t the sme time, reducing costs becuse seprte heter burnout lrm device is not required. SSR filure detection cn be used even with Models with Singlephse Heter Burnout Alrms. Note: E5N-@HH@ (Option Bord) Digitl Temperture ontrollers E5N/E5N-U 3

4 Model Number Structure Model Number Legend ontrollers Output type R: Rely Q: Voltge (for driving SSR) : urrent Y: Long-life rely 2. Number of lrms Blnk: No lrm 2: Two lrms 3. Option Unit M: Option Unit cn be mounted 4. Input type T: Thermocouple/pltinum resistnce thermometer (multi-input) L: Anlog input Option Units E53-N-@N. Functions H3: ommunictions nd heter burnout/ssr filure detection 3: ommunictions HB: Heter burnout/ssr filure detection nd event inputs B: Event inputs HH3: ommunictions nd 3-phse heter burnout/ssr filure detection Q3: ommunictions nd control output 2 (voltge output) QH: Heter burnout/ssr filure detection nd control output 2 (voltge output) PB: Externl power supply for ESB nd event inputs PH: Externl power supply for ESB nd heter burnout/ssr filure detection. Note:. The heting nd cooling function is vilble for models with two lrm points. 2. urrent trnsformers (Ts) re not provided with the Units. Be sure to order Ts when ordering the E5N nd the Option Units. 3. Specify the power supply specifictions when ordering. This dt sheet is provided s guideline for selecting products. Be sure to refer to the following user mnuls for ppliction precutions nd other informtion required for opertion before ttempting to use the product. E5N/E5N-U/AN/EN Temperture ontroller User's Mnul (t. No. H34) E5N/EN/AN Temperture ontroller ommunictions User's Mnul (t. No. H35) 4 Digitl Temperture ontrollers E5N/E5N-U

5 Ordering Informtion ontrollers with Temperture Inputs (Multi-input) Size Power supply voltge Number of lrm points ontrol outputs Model /6 DIN to 24 VA Rely E5N-RMT (W H D) Voltge (for driving SSR) E5N-QMT-5 urrent E5N-MT-5 2 Rely E5N-R2MT-5 Voltge (for driving SSR) E5N-Q2MT-5 urrent E5N-2MT-5 Long-life rely E5N-Y2MT-5 24 VA/VD Rely E5N-RMT-5 Voltge (for driving SSR) E5N-QMT-5 urrent E5N-MT-5 2 Rely E5N-R2MT-5 Voltge (for driving SSR) E5N-Q2MT-5 urrent E5N-2MT-5 ontrollers with Anlog Inputs Size Power supply voltge Number of lrm points ontrol outputs Model /6 DIN to 24 VA Rely E5N-RML (W H D) Voltge (for driving SSR) E5N-QML-5 urrent E5N-ML-5 2 Rely E5N-R2ML-5 Voltge (for driving SSR) E5N-Q2ML-5 urrent E5N-2ML-5 Long-life rely E5N-Y2ML-5 24 VA/VD 2 Rely E5N-R2ML-5 Voltge (for driving SSR) E5N-Q2ML-5 urrent E5N-2ML-5 Option Units The E5N provides optionl functionlity when one of the following Option Units is mounted. Functions Model ommunictions Heter burnout/ssr filure detection E53-NH3N ommunictions E53-N3N Heter burnout/ssr filure detection Event inputs E53-NHBN Event inputs E53-NBN ommunictions 3-phse heter burnout/ssr filure detection E53-NHH3N ommunictions ontrol output 2 (voltge output) E53-NQ3N Heter burnout/ssr filure detection ontrol output 2 (voltge output) E53-NQHN Event inputs Externl power supply for ESB E53-NPBN (See note.) Heter burnout/ssr filure detection Externl power supply for ESB E53-NPHN (See note.) Note:. E53-NPBN nd E53-NPHN cnnot be mounted on E5N-@@ (current output models). 2. Option Units cnnot be used for Plug-in models. These Option Units cn be used for the new E5N models only. E53-NH3N ommunictions/ T B RS-485 A 2 Do not use. 3 4 T 5 E53-NHBN Event inputs/ T T 2 EV EV E53-N3N ommunictions B RS-485 A 2 Do not use. Do not use. Do not use E53-NBN Event inputs 2 EV EV2 Do not use. Do not use E53-NHH3N ommunictions/ Two Ts B RS-485 A 2 3 T2 4 T 5 E53-NQ3N ommunictions/ ontrol output 2 B RS-485 A 2 Do not use ontrol output 2 5 Attch the pproprite terminl lbels. E53-NQHN ontrol output 2/ T + ontrol output 2 2 Do not use. 3 T 4 5 Voltge output 2 VD, 2 ma E53-NPBN Event inputs/ Externl power supply for ESB 2 EV 3 EV2 + 4 Externl power 5 2 VD±% 2 ma E53-NPHN Externl power supply for ESB/T 2 VD±% 2 ma + Externl power 2 Do not use. 3 T 4 5 Digitl Temperture ontrollers E5N/E5N-U 5

6 Model Number Structure Model Number Legend (Plug-in-type ontrollers) Output type R: Rely Q: Voltge 2. Number of lrms Blnk: No lrm : One lrm 2: Two lrms 3. Input type T: Thermocouple/pltinum resistnce thermometer (multi-input) 4. Plug-in type U: Plug-in type Ordering Informtion (Plug-in-type ontrollers) ontrollers with Temperture Inputs (Multi-input) Size Power supply voltge Number of lrm points ontrol outputs Model /6 DIN to 24 VA Rely E5N-RTU Voltge (for driving SSR) E5N-QTU Rely E5N-RTU Voltge (for driving SSR) E5N-QTU 2 Rely E5N-R2TU Voltge (for driving SSR) E5N-Q2TU 24 VA/VD Rely E5N-RTU Voltge (for driving SSR) E5N-QTU Rely E5N-RTU Voltge (for driving SSR) E5N-QTU 2 Rely E5N-R2TU Voltge (for driving SSR) E5N-Q2TU Note: Option Units (E53-N@@N) cnnot be used for Plug-in models. Accessories (Order Seprtely) USB-Seril onversion ble Model E58-IFQ Adpter onnectble models Model Terminl type Y92F-45 Terminl over onnectble models Terminl type Model E53-OV Note: The Terminl over comes with the E5N-@@@-5 models. urrent Trnsformers (Ts) Model E54-T E54-T3 Hole dimeter 5.8 di. 2. di. Note: Use this Adpter when the pnel hs been previously prepred for the E5B@. Sockets (for Models with Plug-in onnectors) Model P2F- P2F--E P3GA- Y92A-48G Type Frontconnecting Socket Frontconnecting Socket with Finger Protection Bckconnecting Socket Terminl over for Finger Protection 6 Digitl Temperture ontrollers E5N/E5N-U

7 Specifictions Rtings Item Power supply voltge to 24 VA, 5/6 Hz 24 VA, 5/6 Hz or 24 VD Operting voltge rnge 85% to % of rted supply voltge Power E5N 7.5 VA mx. (E5N-R2T: 3. VA t VA) 5 VA/3 W mx. (E5N-R2T: 2.7 VA t 24 VA) consumption E5N-U 6 VA mx. 3 VA/2 W mx. Sensor input Models with temperture inputs Thermocouple: K, J, T, E, L, U, N, R, S, or B Pltinum resistnce thermometer: Pt or JPt Infrred temperture sensor: to 7, 6 to 2, 5 to 65, or 6 to 26 Voltge input: to 5 mv Models with nlog inputs urrent input: 4 to 2 ma or to 2 ma Voltge input: to 5 V, to 5 V, or to V Input impednce urrent input: 5 Ω, Voltge input: MΩ (Use : connection when connecting the ES2-HB.) ontrol output Rely output E5N ST-NO, 25 VA, 3 A (resistive lod), electricl life:, opertions, minimum pplicble lod: 5 V, ma E5N-U DT, 25 VA, 3 A (resistive lod), electricl life:, opertions, minimum pplicble lod: 5 V, ma Voltge output E5N Output voltge: 2 VD ±5% (PNP), mx. lod current: 2 ma, with short-circuit protection circuit E5N-U urrent output E5N 4 to 2 ma D/ to 2 ma D, lod: 6 Ω mx., resolution: pprox. 2,7 Long-life rely output E5N ST-NO, 25 VA, 3 A (resistive lod), electricl life:,, opertions, lod power supply voltge: 75 to 25 VA (D lods cnnot be connected.), minimum pplicble lod: 5 V, ma, lekge current: 5 ma mx. (25 VA, 6 Hz) ST-NO, 25 VA, A (resistive lod), electricl life:, opertions, minimum pplicble lod: V, ma Alrm output Event input ontct input : kω mx., : kω min. Non-contct : Residul voltge:.5 V mx., : Lekge current:. ma mx. input Externl power supply for ESB ontrol method Setting method Indiction method Other functions Ambient operting temperture Outflow current: Approx. 7 ma per point 2 VD ±%, 2 ma, Short-circuit protection provided. / control or 2-PID control (with uto-tuning) Digitl setting using front pnel keys -segment digitl disply nd individul indictors (7-segments displys lso possible) hrcter height: PV: mm, SV: 6.5 mm Mnul output, heting/cooling control, trnsfer output (on some models), loop brek lrm, multi, MV limiter, input digitl filter, self-tuning, temperture input shift, run/stop, protection functions, etc. to 55 (with no icing or condenstion), for 3-yer wrrnty: to 5 Ambient operting humidity 25% to 85% Storge temperture 25 to 65 (with no icing or condenstion) Digitl Temperture ontrollers E5N/E5N-U 7

8 Input Rnges Thermocouples/Pltinum Resistnce Thermometers (Multi-inputs) Temperture rnge ( ) Input Type Pltinum resistnce thermometer Thermocouple Nme Pt JPt K J T E L U N R S B to Setting number Infrred temperture sensor 6 to 2 5 to 65 6 to 26 Anlog input to 5 mv 8 Usble in the following rnges by scling: 999 to 9999 or 99.9 to The pplicble stndrds for the input types re s follows: K, J, T, E, N, R, S, B: IE584- L: Fe-uNi, DIN U: u-uni, DIN Pt: IE 75 Shded settings re the defult settings. Models with Anlog Inputs Input Type urrent Voltge Input specifiction 4 to 2mA to 2 ma to 5 V to 5 V to V Setting rnge Usble in the following rnges by scling: 999 to 9999, 99.9 to 999.9, 9.99 to or.999 to Setting number Shded settings re the defult settings. 8 Digitl Temperture ontrollers E5N/E5N-U

9 Alrm Types Select lrm types out of the 2 lrm types listed in the following tble. Set vlue Alrm type Alrm output opertion Alrm function Upper- nd lowerlimit (See note.) 2 Upper limit 3 Lower limit 4 Upper- nd lowerlimit rnge (See note.) 5 Upper- nd lowerlimit with stndby (See note.) sequence 6 Upper-limit with stndby sequence 7 Lower-limit with stndby sequence 8 Absolute-vlue upper-limit 9 Absolute-vlue lower-limit Absolute-vlue upper-limit with stndby sequence Absolute-vlue lower-limit with stndby sequence 2 LBA (for lrm (See note 6.) only) When is positive Output (See note 5.) --- L H L H L H When is negtive (See note 2.) (See note 3.) (See note 4.) Note:. With set vlues, 4 nd 5, the upper nd lower limit vlues cn be set independently for ech lrm type, nd re expressed s L nd H. 2. Set vlue:, Upper- nd lower-limit lrm se L H H<, L> H < L se 2 L H H>, L< H > L se 3 (Alwys ) H 3. Set vlue: 4, Upper- nd lower-limit rnge se L H H<, L> H < L se 2 L H H>, L< H > L H>, L< H L H L 4. Set vlue: 5, Upper- nd lower-limit with stndby sequence For Upper- nd Lower-Limit Alrm Described Above se nd 2 Alwys when the upper-limit nd lower-limit hysteresis overlps. se 3: Alwys 5. Set vlue: 5, Upper- nd lower-limit with stndby sequence Alwys when the upper-limit nd lower-limit hysteresis overlps. 6. Set vlue: 2, LBA cn be set only for lrm. Set the lrm types for lrms to 3 independently in the initil setting level. The defult setting is 2 (upper limit). H H H H L L L L L se 3 (Alwys ) H<, L< H<, L> H L H>, L< H L H<, L< H<, L> H L Digitl Temperture ontrollers E5N/E5N-U 9

10 hrcteristics Indiction ccurcy Thermocouple: (See note.) E5N: Influence of temperture (See note 2.) Influence of voltge (See note 2.) (±.5% of indicted vlue or ±, whichever is greter) ± digit mx. E5N-U: (±% of indicted vlue or ±2, whichever is greter) ± digit mx. Pltinum resistnce thermometer: (±.5% of indicted vlue or ±, whichever is greter) ± digit mx. Anlog input: ±.5% FS ± digit mx. T input: ±5% FS ± digit mx. R, S, nd B thermocouple inputs: (±% of PV or ±, whichever is greter) ± digit mx. Other thermocouple inputs: (±% of PV or ±4, whichever is greter) ± digit mx. *± for or less for K sensors Pltinum resistnce thermometer inputs: (±% of PV or ±2, whichever is greter) ± digit mx. Anlog inputs: (±% of FS) ± digit mx. Hysteresis Models with thermocouple/pltinum resistnce thermometer (multi-input) input:. to EU (in units of. EU) Models with nlog input:. to 99.99% FS (in units of.% FS) Proportionl bnd (P) Models with thermocouple/pltinum resistnce thermometer (multi-input) input:. to EU (in units of. EU) Models with nlog input:. to 999.9% FS (in units of.% FS) Integrl time (I) to 3999 s (in units of s) Derivtive time (D) to 3999 s (in units of s) (See note 3.) ontrol period.5, to 99 s (in units of s) Mnul reset vlue. to.% (in units of.%) Alrm setting rnge 999 to 9999 (deciml point position depends on input type) Smpling period 25 ms Affect of signl source resistnce Insultion resistnce Dielectric strength Vibrtion resistnce Shock resistnce Mlfunction Thermocouple:. /Ω mx. ( Ω mx.) (See note 4.) Pltinum resistnce thermometer:.4 /Ω mx. ( Ω mx.) 2 MΩ min. (t 5 VD) 2, VA, 5 or 6 Hz for min (between terminls with different chrge) to 55 Hz, 2 m/s 2 for min ech in, Y, nd Z directions Destruction to 55 Hz,.75-mm single mplitude for 2 hrs ech in, Y, nd Z directions Mlfunction m/s 2 min., 3 times ech in, Y, nd Z directions Destruction 3 m/s 2 min., 3 times ech in, Y, nd Z directions Weight E5N ontroller: Approx. 5 g, Mounting Brcket: Approx. g E5N-U ontroller: Approx. g, Mounting Brcket: Approx. g Degree of protection E5N Front pnel: NEMA4 for indoor use (equivlent to IP66) Rer cse: IP2, Terminl section: IP E5N-U Front pnel: Equivlent to IP5, rer cse: IP2, terminls: IP Memory protection Non-voltile memory (number of writes:,, opertions) EM Emission Enclosure: EN55 Group lss A Emission A Mins: EN55 Group lss A Immunity ESD: EN kv contct dischrge (level 2) 8 kv ir dischrge (level 3) Immunity RF-interference: EN6-4-3 V/m (8- MHz,.4-2. GHz mplitude modulted) (level 3) V/m (9 MHz pulse modulted) Immunity onducted Disturbnce: EN V (.5 to 8 MHz) (level 2) Immunity Burst: EN kv Power-line (level 3) kv I/O signl-line (level 3) Immunity Surge: EN6-4-5 kv line to line Power line, output line (rely output) 2 kv line to ground Power line, output line (rely output) kv line to ground Input line (communiction) Immunity Voltge Dip/Interrupting: EN cycle, % (rted voltge) Approved stndrds UL 6- SA 22.2 No.. onformed stndrds EN6326, EN6-, IE6- VDE6 Prt (Finger protection), when the terminl cover is mounted. Note:. The indiction ccurcy of K thermocouples in the 2 to 3 rnge, T nd N thermocouples t temperture of mx., nd U nd L thermocouples t ny temperture is ±2 ± digit mximum. The indiction ccurcy of the B thermocouple t temperture of 4 mx. is not specified. The indiction ccurcy of the R nd S thermocouples t temperture of 2 mx. is ±3 ± digit mx. 2. EU stnds for Engineering Unit nd is used s the unit fter scling. For temperture sensor, the EU is or F. 3. When robust tuning (RT) is, the differentil time is. to (in units of. s). 4. B, R, nd S sensors:.2 /Ω mx. ( Ω mx.) USB-Seril onversion ble Applicble OS Windows 2/P Applicble softwre Thermo Mini, -Thermo Applicble models E5N/E5N-U/E5AN/E5EN USB interfce stndrd onforms to USB Specifiction.. DTE speed 384 bps onnector specifictions omputer: USB (type A plug) Temperture ontroller: Seril Power supply Bus power (Supplied from USB host controller.) Power supply voltge 5 VD urrent consumption 7 ma Ambient operting temperture to 55 (with no condenstion or icing) Ambient operting humidity % to 8% Storge temperture 2 to 6 (with no condenstion or icing) Storge humidity % to 8% Altitude 2, m mx. Weight Approx. g Note: A driver must be instlled in the personl computer. Refer to instlltion informtion in the opertion mnul for the onversion ble. ommunictions Specifictions Trnsmission line RS-485 multipoint connection method ommunictions RS-485 (two-wire, hlf duplex) Synchroniztion Strt-stop synchroniztion method Bud rte 2, 24, 48, 96, 92, or 384 bps Trnsmission code ASII Dt bit length 7 or 8 bits Stop bit length or 2 bits Error detection Verticl prity (none, even, odd) Frme check sequence (FS) with SYSWAY Block check chrcter (B) with ompowy/f or R-6 Modbus Flow control None Interfce RS-485 Retry function None ommunictions 4 bytes buffer ommunictions response wit time to 99 ms Defult: 2 ms Note: The bud rte, dt bit length, stop bit length, nd verticl prity cn be individully set using the ommunictions Setting Level. Digitl Temperture ontrollers E5N/E5N-U

11 urrent Trnsformer (Sold Seprtely) Rtings Dielectric strength Vibrtion resistnce Weight Accessories (E54-T3 only), VA for min 5 Hz, 98 m/s 2 E54-T: Approx..5 g, E54-T3: Approx. 5 g Armtures (2) Plugs (2) Heter Burnout Alrms nd SSR Filure Detection Alrms Mximum heter current Input current indiction ccurcy Heter burnout lrm setting rnge SSR filure detection lrm setting rnge 5 A A ±5% FS ± digit mx.. to 49.9 A (in units of. A). A: Heter burnout/ssr filure lrm output turned. 5. A: Heter burnout/ssr filure lrm output turned. Minimum detection time: 9 ms (See note.). to 49.9 A (in units of. A). A: Heter burnout/ssr filure lrm output turned. 5. A: Heter burnout/ssr filure lrm output turned. Minimum detection time: 9 ms (See note 2.) Note:. If the time of control output is less thn 9 ms, heter burnout detection nd the heter current will not be mesured. 2. If the time of control output is less thn 9 ms, SSR filure detection nd the heter current will not be mesured. Electricl Life Expectncy urve for Relys (Reference Vlues) Life ( 4 opertions) E54-T Thru-current (Io) vs. Output Voltge (Eo) (Reference Vlues) Mximum continuous heter current: 5 A (5/6 Hz) Number of windings: 4±2 Winding resistnce: 8±2 Ω Output voltge (Eo) V (r.m.s.) V mv µv 5 Hz kω Ω RL = Ω 3% % Distortion fctor % ma, A Thru-current (Io) A (r.m.s.) E54-T3 Thru-current (Io) vs. Output Voltge (Eo) (Reference Vlues) Mximum continuous heter current: 2 A (5/6 Hz) (Mximum continuous heter current for n OMR Temperture ontroller is 5 A.) Number of windings: 4±2 Winding resistnce: 8±.8 Ω Output voltge (Eo) V (r.m.s.) V mv µv 5 Hz kω 5 Ω Ω 5 Ω RL = Ω Distortion fctor % 3% % ma, A Thru-current (Io) A (r.m.s.) 5 3 E5N 25 VA, 3 VD (resistive lod) cosφ = Switching current (A) Note: Do not connect D lod to ontroller with Long-life Rely Output. Digitl Temperture ontrollers E5N/E5N-U

12 Externl onnections A voltge output (control output) is not electriclly insulted from the internl circuits. When using grounding thermocouple, do not connect ny of the control output terminls to ground. If the control output terminls re connected to ground, errors will occur in the mesured temperture vlues s result of lekge current. Stndrd insultion is pplied between ny of the following: power supply terminls, input terminls, output terminls, nd communictions terminls (for models with communictions). If reinforced insultion is required, provide dditionl insultion, such s spcil distnce or mteril insultion, s defined by IE 6664 suitble for the mximum operting voltge. onsult with your OMR representtive before using the externl power supply for the ESB for ny other purpose. E5N Rely output 25 VA, 3 A (Resistive lod) Voltge output 2 VD, 2 ma urrent output 4 to 2 ma D to 2 ma D Lod 6 Ω mx. ma V + + Anlog input + ontrol output A B B + T/Pt Multi-input Alrm output (Rely output) Alrm output 2 Alrm output, HBA/HS lrm/input error Input power supply Alrm output (Rely output), 25 VA, A (Resistive lod) to 24 VA 24 VA/D (no polrity) EV EV Externl power supply 5 + Externl power supply Do not connect. T EV EV2 T B RS-485 A T2 T B RS-485 A Do not connect. ontrol output ontrol output 2 Do not connect. T Voltge output 2 VD, 2 ma Event inputs, Externl power supply for ESB* Externl power supply for ESB*, One T Event inputs, One T ommunictions, Two Ts ommunictions, Voltge output Voltge output One T E5N-U Rely output DT 25 VA, 3 A (Resistive lod) Voltge output 2 VD, 2 ma ontrol output + A + B B Alrm output (Rely output), 25 VA, A (Resistive lod) Alrm output / input error Alrm output Input power supply ontrol output 2 T/Pt Multi-input to 24 VA 24 VA/D (no polrity) 2 Digitl Temperture ontrollers E5N/E5N-U

13 Nomenclture E5N E5N-U The front pnel is the sme for the E5N nd E5N-U. Temperture unit Opertion indictors No. disply No. 2 disply Level Key Up Key Mode Key Down Key Dimensions E5N Terminl Models Pnel utout Mounted Seprtely Group Mounted (48 number of units 2.5) Mounting Adpter (Accessory) Terminl over (E53-OV) 6 min. Note: The terminl block cnnot be removed. The suffix -5 is dded to the model number of ech ontroller provided with E53-OV Terminl over Group mounting does not llow wterproofing. Recommended pnel thickness is to 5 mm. Group mounting is not possible in the verticl direction. (Mintin the specified mounting spce between ontrollers.) To mount the ontroller so tht it is wterproof, insert the wterproof pcking onto the ontroller. When two or more ontrollers re mounted, mke sure tht the surrounding temperture does not exceed the llowble operting temperture specified in the specifictions. E5N-U Plug-in Models Pnel utout Mounted Seprtely Group Mounted (48 number of units 2.5) Mounting Adpter (Accessory) min Recommended pnel thickness is to 5 mm. Group mounting is not possible in the verticl direction. (Mintin the specified mounting spce between ontrollers.) When two or more ontrollers re mounted, mke sure tht the surrounding temperture does not exceed the llowble operting temperture specified in the specifictions. Digitl Temperture ontrollers E5N/E5N-U 3

14 Accessories USB-Seril onversion ble (Sold Seprtely) E58-IFQ (2,) 25 LED indictor (SD),765 USB connector (type A plug) LED indictor (RD) Seril connector Terminl over E53-OV Note: The suffix -5 is dded to the model number of ech ontroller provided with E53-OV Terminl over. 9. urrent Trnsformers (Sold Seprtely) E54-T di Two, 3.5 di. 3 E54-T3 3 2 di di. 9 E54-T3 Accessory Armture Approx. 3 di. onnection Exmple Armture Plug Led 4 4 Two, M3 (depth: 4) Plug 8 5 Approx. 6 di. 3 (22) 4 Digitl Temperture ontrollers E5N/E5N-U

15 Adpter (Sold Seprtely) Note: Use this Adpter when the pnel hs lredy been prepred for the Y92F Fixture (Accessory) 69.6 to Mounted to E5N Pnel ( to 8 mm) (to bck of E5N) E5N-U Wiring Socket (Sold Seprtely) Front-connecting Socket P2F- Eleven, M sems screws Terminl Lyout/Internl onnections (Top View) 7 mx Mounting Holes Two, 4.5 di. mounting holes Two, 4.5-di. holes ±.2 Note: n lso be mounted to DIN trck. 4 5 mx. 3.2 mx. Note: A model with finger protection (P2F--E) is lso vilble. Bck-connecting Socket P3GA- 27 di Terminl Lyout/Internl onnections (Bottom View) Note:. Using ny other sockets will dversely ffect ccurcy. Use only the specified sockets. 2. A Protective over for finger protection (Y92A-48G) is lso vilble. Digitl Temperture ontrollers E5N/E5N-U 5

16 Digitl Temperture ontrollers E5EN This Best-selling Generl-purpose Temperture ontroller Is Now Even Better. USB-Seril onversion ble nd Support Softwre Are Also Avilble. ontrollers now vilble with nlog inputs. Fster smpling t 25 ms. Trnsfer output provided for esy output to recorders. Voltge outputs (to drive SSRs) for both heting nd cooling control. Models vilble with three-phse heter burnout detection nd SSR fult detection. Mnul output provided. ontroller vilble with long-life rely output. Models vilble with externl power supply for ESB Infrred Thermosensor. Esy setting with -segment displys. onnect to either thermocouple or pltinum resistnce thermometer with the sme model. Esily see the sttus from distnce with PV disply with threecolor switching function. Note: Refer to Precutions on pge 43. Note: Refer to pge 4 for informtion on chnges in comprison to previous models. Fetures Improved Functions for Wider Rnge of Appliction ontrol Anlog Vlues, such s Pressures, Flowrtes, nd Levels The E5EN Series now lso includes models tht ccept nlog inputs, enbling control pplictions other thn for temperture, including pressure, flowrte, level, humidity, nd weight control. Fster Smpling t 25 ms The previous smpling time of 5 ms hs been reduced by hlf to 25 ms. This enbles the E5EN to hndle ppliction requiring even greter response speed nd ccurcy. Esy onnector to Recorder A trnsfer output now mkes it esy to connect to recorder or PL Anlog I/O Unit. Voltge Outputs (to Drive SSRs) for Both Heting nd ooling ontrol. Voltge outputs cn be used for both heting nd cooling for Models with Two ontrol Outputs. Three-phse Heter Burnout Detection With Models with Three-phse Heter Burnout nd SSR Filure Detection, two current trnsformers cn be connected to detect both heter burnout nd SSR filure t the sme time, reducing costs becuse seprte heter burnout lrm device is not required. SSR filure detection cn be used even with Models with Singlephse Heter Burnout Alrms. E58-IFQ USB-Seril onversion ble for omputer onnection A personl computer connection is possible for models without communictions. The -Thermo Support Softwre (sold seprtely) cn be used to set prmeters, monitor opertion, nd prmeter msks. (-Thermo support of the E5EN is scheduled for Mrch 25.) Specifictions: pge 9, Dimensions: pge 25 6 Digitl Temperture ontrollers E5EN

17 Model Number Structure Model Number Legend Output type R: Rely Q: Voltge for driving SSR : urrent 2. Number of lrms 3: 3 lrms 3. Heter burnout/ssr filure H: Heter burnout/ssr filure detection ( T) HH: Heter burnout/ssr filure detection (2 T) Blnk: Not vilble 4. Output 2/Externl power supply for ESB Q: Voltge for driving SSR Y: Long-life Rely P: Externl Power supply for ESB Blnk: Not vilble 5. Option Unit 6. Input type T: Thermocouple/pltinum resistnce thermometer (multi-input) L: Anlog input Ordering Informtion Temperture Input (Multi Input) Stndrd Models Size Power supply voltge Number of lrm points ontrol output Heter lrm Model /8 DIN to 24 VA 3 Rely No E5EN-R3MT (W H D) Yes ( T) E5EN-R3HMT-5 Yes (2 T) E5EN-R3HHMT-5 Voltge (for driving SSR) No E5EN-Q3MT-5 Yes ( T) E5EN-Q3HMT-5 Yes (2 T) E5EN-Q3HHMT-5 urrent No E5EN-3MT-5 24 VA/VD 3 Rely No E5EN-R3MT-5 Yes ( T) E5EN-R3HMT-5 Voltge (for driving SSR) No E5EN-Q3MT-5 Yes ( T) E5EN-Q3HMT-5 urrent No E5EN-3MT-5 Temperture Input (Multi Input) 2 Outputs Models Size Power supply voltge Number of lrm points ontrol output ontrol output 2 /8 DIN to 24 VA 3 Rely Voltge (for (W H D) driving SSR) Voltge (for driving SSR) urrent Voltge (for driving SSR) Ling-life Rely Voltge (for driving SSR) Ling-life Rely Power supply for ESB No Model E5EN-R3QMT-5 E5EN-Q3QMT-5 E5EN-Q3YMT-5 E5EN-3QMT-5 E5EN-3YMT-5 Rely No Yes E5EN-R3PMT-5 Voltge (for driving SSR) E5EN-Q3PMT-5 Digitl Temperture ontrollers E5EN 7

18 Anlog Input Models Size Option Units Power supply voltge Number of lrm points ontrol output Heter lrm ontrol output 2 /8 DIN to 24 VA 3 Rely No No E5EN-R3ML (W H D) Voltge (for No E5EN-Q3ML-5 driving SSR) urrent No E5EN-3ML-5 Rely Yes ( T) E5EN-R3HML-5 Voltge (for Yes ( T) E5EN-Q3HML-5 driving SSR) Voltge (for driving SSR) No Long-life Rely E5EN-Q3YML-5 Nme Function Model ommuniction Unit RS-232 ommuniction E53-EN RS-485 ommuniction E53-EN3 Event Input Unit Event Input E53-AKB Model 8 Digitl Temperture ontrollers E5EN

19 Specifictions Rtings Item Power supply voltge Operting voltge rnge to 24 VA, 5/6 Hz 24 VA, 5/6 Hz or 24 VD 85% to % of rted supply voltge Power consumption Approx. VA Approx. 5.5 VA (24 VA)/pprox. 4 W (24 VD) Sensor input Input impednce ontrol output Models with temperture inputs Thermocouple: K, J, T, E, L, U, N, R, S, or B Pltinum resistnce thermometer: Pt or JPt Infrred temperture sensor: to 7, 6 to 2, 5 to 65, or 6 to 26 Voltge input: to 5 mv Models with nlog inputs urrent input: 4 to 2 ma or to 2 ma Voltge input: to 5 V, to 5 V, or to V urrent input: 5 Ω, Voltge input: MΩ (Use : connection when connecting the ES2-HB.) Rely output ST-NO, 25 VA, 5 A (resistive lod), electricl life:, opertions, minimum pplicble lod: 5 V, ma Voltge output Output voltge: 2 VD +5%/ 2% (PNP), mx. lod current: 4 ma, with short-circuit protection circuit (mx. lod current of control output 2: 2 ma) urrent output 4 to 2 ma D/ to 2 ma D, lod: 6 Ω mx., resolution: pprox. 2,7 Long-life rely output ST-NO, 25 VA, 3 A (resistive lod), electricl life:,, opertions, lod power supply voltge: 75 to 25 VA (D lods cnnot be connected.), minimum pplicble lod: 5 V, ma, lekge current: 5 ma mx. (25 VA, 6 Hz) ST-NO, 25 VA, 3 A (resistive lod), electricl life:, opertions, minimum pplicble lod: V, ma Alrm output Event input ontct input : kω mx., : kω min. Non-contct : Residul voltge:.5 V mx., : Lekge current:. ma mx. input Externl power supply for ESB ontrol method Setting method Indiction method Other functions Ambient operting temperture Outflow current: Approx. 7 ma per point 2 VD ±%, 2 ma, Short-circuit protection provided. / control or 2-PID control (with uto-tuning) Digitl setting using front pnel keys -segment digitl disply nd individul indictors (7-segments displys lso possible) hrcter height: PV: 4 mm, SV: 9.5 mm Mnul output, heting/cooling control, trnsfer output (on some models), loop brek lrm, multi, MV limiter, input digitl filter, self-tuning, temperture input shift, run/stop, protection functions, etc. to 55 (with no icing or condenstion), for 3-yer wrrnty: to 5 Ambient operting humidity 25% to 85% Storge temperture 25 to 65 (with no icing or condenstion) Digitl Temperture ontrollers E5EN 9

20 Input Rnges Thermocouples/Pltinum Resistnce Thermometers (Multi-inputs) Temperture rnge ( ) Input Type Pltinum resistnce thermometer Thermocouple Nme Pt JPt K J T E L U N R S B to Setting number Infrred temperture sensor 6 to 2 5 to 65 6 to 26 Anlog input to 5 mv 8 Usble in the following rnges by scling: 999 to 9999 or 99.9 to The pplicble stndrds for the input types re s follows: K, J, T, E, N, R, S, B: IE 584- L: Fe-uNi, DIN U: u-uni, DIN Pt: IE 75 Shded settings re the defult settings. Models with Anlog Inputs Input Type urrent Voltge Input specifiction 4 to 2mA to 2 ma to 5 V to 5 V to V Setting rnge Usble in the following rnges by scling: 999 to 9999, 99.9 to 999.9, 9.99 to or.999 to Setting number Shded settings re the defult settings. 2 Digitl Temperture ontrollers E5EN

21 Alrm Types Select lrm types out of the 2 lrm types listed in the following tble. Set vlue Alrm type Alrm output opertion Alrm function Upper- nd lowerlimit (See note.) 2 Upper limit 3 Lower limit 4 Upper- nd lowerlimit rnge (See note.) 5 Upper- nd lowerlimit with stndby (See note.) sequence 6 Upper-limit with stndby sequence 7 Lower-limit with stndby sequence 8 Absolute-vlue upper-limit 9 Absolute-vlue lower-limit Absolute-vlue upper-limit with stndby sequence Absolute-vlue lower-limit with stndby sequence 2 LBA (for lrm (See note 6.) only) When is positive Output (See note 5.) --- L H L H L H When is negtive (See note 2.) (See note 3.) (See note 4.) Note:. With set vlues, 4 nd 5, the upper nd lower limit vlues cn be set independently for ech lrm type, nd re expressed s L nd H. 2. Set vlue:, Upper- nd lower-limit lrm se L H H<, L> H < L se 2 L H H>, L< H > L se 3 (Alwys ) H 3. Set vlue: 4, Upper- nd lower-limit rnge se L H H<, L> H < L se 2 L H H>, L< H > L H>, L< H L H L 4. Set vlue: 5, Upper- nd lower-limit with stndby sequence For Upper- nd Lower-Limit Alrm Described Above se nd 2 Alwys when the upper-limit nd lower-limit hysteresis overlps. se 3: Alwys 5. Set vlue: 5, Upper- nd lower-limit with stndby sequence Alwys when the upper-limit nd lower-limit hysteresis overlps. 6. Set vlue: 2, LBA cn be set only for lrm. Set the lrm types for lrms to 3 independently in the initil setting level. The defult setting is 2 (upper limit). H H H H L L L L L se 3 (Alwys ) H<, L< H<, L> H L H>, L< H L H<, L< H<, L> H L Digitl Temperture ontrollers E5EN 2

22 hrcteristics Indiction ccurcy Thermocouple: (See note.) (±.5% of indicted vlue or ±, whichever is greter) ± digit mx. Pltinum resistnce thermometer: (±.5% of indicted vlue or ±, whichever is greter) ± digit mx. Anlog input: ±.5% FS ± digit mx. T input: ±5% FS ± digit mx. Influence of temperture (See note 2.) Influence of voltge (See note 2.) R, S, nd B thermocouple inputs: (±% of PV or ±, whichever is greter) ± digit mx. Other thermocouple inputs: (±% of PV or ±4, whichever is greter) ± digit mx. *± for or less for K sensors Pltinum resistnce thermometer inputs: (±% of PV or ±2, whichever is greter) ± digit mx. Anlog inputs: (±% of FS) ± digit mx. Hysteresis Models with thermocouple/pltinum resistnce thermometer (multi-input) input:. to EU (in units of. EU) (See note 3.) Models with nlog input:. to 99.99% FS (in units of.% FS) Proportionl bnd (P) Models with thermocouple/pltinum resistnce thermometer (multi-input) input:. to EU (in units of. EU) (See note 3.) Models with nlog input:. to 999.9% FS (in units of.% FS) Integrl time (I) to 3999 s (in units of s) Derivtive time (D) to 3999 s (in units of s) (See note 4.) ontrol period.5, to 99 s (in units of s) Mnul reset vlue. to.% (in units of.%) Alrm setting rnge 999 to 9999 (deciml point position depends on input type) Smpling period 25 ms Affect of signl source resistnce Insultion resistnce Dielectric strength Vibrtion resistnce Shock resistnce Weight Degree of protection Mlfunction Thermocouple:. /Ω mx. ( Ω mx.) (See note 5.) Pltinum resistnce thermometer:.4 /Ω mx. ( Ω mx.) 2 MΩ min. (t 5 VD) 2, VA, 5 or 6 Hz for min (between terminls with different chrge) to 55 Hz, 2 m/s 2 for min ech in, Y, nd Z directions Destruction to 55 Hz,.75-mm single mplitude for 2 hrs ech in, Y, nd Z directions Mlfunction m/s 2 min., 3 times ech in, Y, nd Z directions Destruction 3 m/s 2 min., 3 times ech in, Y, nd Z directions ontroller: Approx. 26 g, Mounting Brcket: Approx. g Front pnel: NEMA4 for indoor use (equivlent to IP66) Rer cse: IP2, Terminl section: IP Memory protection Non-voltile memory (number of writes:,, opertions) EM Emission Enclosure: EN55 Group lss A Emission A Mins: EN55 Group lss A Immunity ESD: EN kv contct dischrge (level 2) 8 kv ir dischrge (level 3) Immunity RF-interference: EN6-4-3 V/m (8- MHz,.4-2. GHz mplitude modulted) (level 3) V/m (9 MHz pulse modulted) Immunity onducted Disturbnce: EN V (.5 to 8 MHz) (level 2) Immunity Burst: EN kv Power-line (level 3) kv I/O signl-line (level 3) Immunity Surge: EN6-4-5 kv line to line Power line, output line (rely output) 2 kv line to ground Power line, output line (rely output) kv line to ground Input line (communiction) Immunity Voltge Dip/Interrupting: EN cycle, % (rted voltge) Approved stndrds UL 6- SA 22.2 No.. onformed stndrds EN6326, EN6-, IE6- VDE6 Prt (Finger protection), when the terminl cover is mounted. Note:. The indiction ccurcy of K thermocouples in the 2 to 3 rnge, T nd N thermocouples t temperture of mx., nd U nd L thermocouples t ny temperture is ±2 ± digit mximum. The indiction ccurcy of the B thermocouple t temperture of 4 mx. is not specified. The indiction ccurcy of the R nd S thermocouples t temperture of 2 mx. is ±3 ± digit mx. 2. onditions: Ambient temperture: to 23 to 55, Voltge rnge: 5% to +% of rted voltge 3. EU stnds for Engineering Unit nd is used s the unit fter scling. For temperture sensor, the EU is or F. 4. When robust tuning (RT) is, the differentil time is. to (in units of. s). 5. B, R, nd S sensors:.2 /Ω mx. ( Ω mx.) USB-Seril onversion ble Applicble OS Windows 2/P Applicble softwre Thermo Mini, -Thermo Applicble models E5N/E5N-U/E5AN/E5EN USB interfce stndrd onforms to USB Specifiction.. DTE speed 384 bps onnector specifictions omputer: USB (type A plug) Temperture ontroller: Seril Power supply Bus power (Supplied from USB host controller.) Power supply voltge 5 VD urrent consumption 7 ma Ambient operting temperture to 55 (with no condenstion or icing) Ambient operting humidity % to 8% Storge temperture 2 to 6 (with no condenstion or icing) Storge humidity % to 8% Altitude 2, m mx. Weight Approx. g Note: A driver must be instlled in the personl computer. Refer to instlltion informtion in the opertion mnul for the onversion ble. ommunictions Specifictions Trnsmission line connection method ommunictions Synchroniztion method Bud rte Trnsmission code Dt bit length (See note.) Stop bit length (See note.) Error detection Flow control Interfce Retry function ommunictions buffer ommunictions response wit time RS-485 multipoint RS-232 RS-485 (two-wire, hlf duplex), RS-232 Strt-stop synchroniztion 2, 24, 48, 96, 92, or 384 bps ASII 7 or 8 bits or 2 bits Verticl prity (none, even, odd) Frme check sequence (FS) with SYSWAY Block check chrcter (B) with ompowy/f or R-6 Modbus None RS-485, RS-232 None 4 bytes to 99 ms Defult: 2 ms Note: The bud rte, dt bit length, stop bit length, nd verticl prity cn be individully set using the ommunictions Setting Level. urrent Trnsformer (Sold Seprtely) Rtings Dielectric strength Vibrtion resistnce Weight Accessories (E54-T3 only), VA for min 5 Hz, 98 m/s 2 E54-T: Approx..5 g, E54-T3: Approx. 5 g Armtures (2) Plugs (2) 22 Digitl Temperture ontrollers E5EN

23 Heter Burnout Alrms nd SSR Filure Detection Alrms Mximum heter current Input current indiction ccurcy Heter burnout lrm setting rnge SSR filure detection lrm setting rnge 5 A A ±5% FS ± digit mx.. to 49.9 A (in units of. A). A: Heter burnout/ssr filure lrm output turned. 5. A: Heter burnout/ssr filure lrm output turned. Minimum detection time: 9 ms (See note.). to 49.9 A (in units of. A). A: Heter burnout/ssr filure lrm output turned. 5. A: Heter burnout/ssr filure lrm output turned. Minimum detection time: 9 ms (See note 2.) Note:. If the time of control output is less thn 9 ms, heter burnout detection nd the heter current will not be mesured. 2. If the time of control output is less thn 9 ms, SSR filure detection nd the heter current will not be mesured. Electricl Life Expectncy urve for Relys (Reference Vlues) Life ( 4 opertions) E5EN 25 VA, 3 VD (resistive lod) cosφ = Switching current (A) Note: Do not connect D lod to ontroller with Long-life Rely Output. E54-T Thru-current (Io) vs. Output Voltge (Eo) (Reference Vlues) Mximum continuous heter current: 5 A (5/6 Hz) Number of windings: 4±2 Winding resistnce: 8±2 Ω Output voltge (Eo) V (r.m.s.) V mv µv 5 Hz kω Ω RL = Ω Distortion fctor % 3% % ma, A Thru-current (Io) A (r.m.s.) E54-T3 Thru-current (Io) vs. Output Voltge (Eo) (Reference Vlues) Mximum continuous heter current: 2 A (5/6 Hz) (Mximum continuous heter current for n OMR Temperture ontroller is 5 A.) Number of windings: 4±2 Winding resistnce: 8±.8 Ω Output voltge (Eo) V (r.m.s.) V 5 Hz mv kω 5 Ω Ω 5 Ω RL = Ω Distortion fctor % 3% % µv ma, A Thru-current (Io) A (r.m.s.) Digitl Temperture ontrollers E5EN 23

24 Externl onnections The voltge output for control output is not electriclly insulted from the internl circuits. When using grounding thermocouple, do not connect ny of the control output terminls to ground. If the control output terminls re connected to ground, errors will occur in the mesured temperture vlues s result of lekge current. The voltge output for control output 2 is electriclly insulted from the internl circuits with stndrd insultion. An R on the end of the lot number indictes tht reinforced insultion is provided between the input power supply, rely outputs, nd other terminls. onsult with your OMR representtive before using the externl power supply for the ESB for ny other purpose. E5EN Rely output 25 VA, 5 A (Resistive lod) to 24 VA Input power supply 24 VA/VD (No polrity) + Voltge output 2 VD, 4 ma ontrol output urrent output 4 to 2 ma D to 2 ma D Alrm output 3 Lod 6 Ω mx. Alrm output (Rely output), 25 VA, 3 A (Resistive lod) Alrm output 2 Alrm output, HBA/HS lrm/input error Event input RS-232 RS-485 SD B (+) EV2 EV RD A ( ) + Voltge ontrol output output 2 2 VD, 2 ma A B B + T/Pt Multi-input SG Long-life rely output 25 VA 3 A (Resistive lod) + ma V + Anlog input Do not use Externl power supply for ESB 2 VD 2 ma One T T Two Ts T T2 Note: For the Ts, use the E54-T (hole di.: 5.8 mm) or the E54-T3 (hole di.: 2 mm) (sold seprtely). Nomenclture E5EN Opertion indictors Temperture unit No. disply Opertion indictors No. 2 disply Mode Key Up Key Level Key Down Key 24 Digitl Temperture ontrollers E5EN

25 Dimensions E5EN Terminl Models Pnel utout Mounted Seprtely Group Mounted (48 number of units 2.5) ALM ALM2 HA ALM3 PV OUT OUT2 MW STOP MANU SV 2 min. Group mounting does not llow wterproofing. E5EN Terminl over (E53-OV) Wterproof Mounting Brcket pcking rimp terminl size: M3.5 Note: To remove the ontroller from the cse, loosen the screw t the bottom of the front pnel with screwdriver while pressing down on the hook t the top of the front pnel Recommended pnel thickness is to 8 mm. Group mounting is not possible in the verticl direction. (Mintin the specified mounting spce between ontrollers.) To mount the ontroller so tht it is wterproof, insert the wterproof pcking onto the ontroller. When two or more ontrollers re mounted, mke sure tht the surrounding temperture does not exceed the llowble operting temperture specified in the specifictions. Accessories USB-Seril onversion ble (Sold Seprtely) E58-IFQ (2,) 25 LED indictor (SD),765 USB connector (type A plug) LED indictor (RD) Seril connector Terminl overs 3 E53-OV (Two overs provided.) 6.5 di Digitl Temperture ontrollers E5EN 25

26 urrent Trnsformers (Sold Seprtely) E54-T di Two, 3.5 di. 3 E54-T3 3 2 di di. 9 E54-T3 Accessory Armture Approx. 3 di. onnection Exmple Armture Plug Led 4 4 Two, M3 (depth: 4) Plug 8 5 Approx. 6 di. 3 (22) 26 Digitl Temperture ontrollers E5EN

27 Digitl Temperture ontrollers E5AN This Best-selling Generl-purpose Temperture ontroller Is Now Even Better. USB-Seril onversion ble nd Support Softwre Are Also Avilble. ontrollers now vilble with nlog inputs. Fster smpling t 25 ms. Trnsfer output provided for esy output to recorders. Voltge outputs (to drive SSRs) for both heting nd cooling control. Models vilble with three-phse heter burnout detection nd SSR fult detection. Mnul output provided. ontroller vilble with long-life rely output. Esy setting with -segment displys. onnect to either thermocouple or pltinum resistnce thermometer with the sme model. Esily see the sttus from distnce with PV disply with threecolor switching function. Note: Refer to Precutions on pge 43. Note: Refer to pge 4 for informtion on chnges in comprison to previous models. Fetures Improved Functions for Wider Rnge of Appliction ontrol Anlog Vlues, such s Pressures, Flowrtes, nd Levels The E5AN Series now lso includes models tht ccept nlog inputs, enbling control pplictions other thn for temperture, including pressure, flowrte, level, humidity, nd weight control. Fster Smpling t 25 ms The previous smpling time of 5 ms hs been reduced by hlf to 25 ms. This enbles the E5AN to hndle ppliction requiring even greter response speed nd ccurcy. Esy onnector to Recorder A trnsfer output now mkes it esy to connect to recorder or PL Anlog I/O Unit. Voltge Outputs (to Drive SSRs) for Both Heting nd ooling ontrol. Voltge outputs cn be used for both heting nd cooling for Models with Two ontrol Outputs. Three-phse Heter Burnout Detection With Models with Three-phse Heter Burnout nd SSR Filure Detection, two current trnsformers cn be connected to detect both heter burnout nd SSR filure t the sme time, reducing costs becuse seprte heter burnout lrm device is not required. SSR filure detection cn be used even with Models with Singlephse Heter Burnout Alrms. E58-IFQ USB-Seril onversion ble for omputer onnection A personl computer connection is possible for models without communictions. The -Thermo Support Softwre (sold seprtely) cn be used to set prmeters, monitor opertion, nd prmeter msks. (-Thermo support of the E5AN is scheduled for Mrch 25.) Specifictions: pge 29, Dimensions: pge 35 Digitl Temperture ontrollers E5AN 27

28 Model Number Structure Model Number Legend Output type R: Rely Q: Voltge for driving SSR : urrent 2. Number of lrms 3: 3 lrms 3. Heter burnout/ssr filure H: Heter burnout/ssr filure detection ( T) HH: Heter burnout/ssr filure detection (2 T) Blnk: Not vilble 4. Output 2 type Q: Voltge for driving SSR Y: Long-life Rely Blnk: Not vilble 5. Option Unit 6. Input type T: Thermocouple/pltinum resistnce thermometer (multi-input) L: Anlog input Ordering Informtion Temperture Input (Multi Input) Stndrd Models Size Power supply voltge Number of lrm points ontrol output Heter lrm Model /4 DIN to 24 VA 3 Rely No E5AN-R3MT (W H D) Yes ( T) E5AN-R3HMT-5 Yes (2 T) E5AN-R3HHMT-5 Voltge (for driving SSR) No E5AN-Q3MT-5 Yes ( T) E5AN-Q3HMT-5 Yes (2 T) E5AN-Q3HHMT-5 urrent No E5AN-3MT-5 24 VA/VD 3 Rely No E5AN-R3MT-5 Yes ( T) E5AN-R3HMT-5 Voltge (for driving SSR) No E5AN-Q3MT-5 Yes ( T) E5AN-Q3HMT-5 urrent No E5AN-3MT-5 Temperture Input (Multi Input) 2 Outputs Models Size Anlog Input Models Option Units Power supply voltge Number of lrm points ontrol output ontrol output 2 Model /4 DIN to 24 VA 3 Rely Voltge (for driving SSR) E5AN-R3QMT (W H D) Voltge (for driving SSR) Voltge (for driving SSR) E5AN-Q3QMT-5 Long-life Rely E5AN-Q3YMT-5 urrent Voltge (for driving SSR) E5AN-3QMT-5 Long-life Rely E5AN-3YMT-5 Size Power supply voltge Number of lrm points ontrol output heter lrm Model /4 DIN to 24 VA 3 Rely Yes ( T) E5AN-R3HML (W H D) Voltge (for driving SSR) Yes ( T) E5AN-Q3HML-5 Nme Function Model ommuniction Unit RS-232 ommuniction E53-EN RS-485 ommuniction E53-EN3 Event Input Unit Event Input E53-AKB 28 Digitl Temperture ontrollers E5AN