MGNETIC LTCHING RELYS / 0ML 8 / 88ML L X W X PRODUCT H (INCHES) FETURES COIL Standard oltage C: DC: Coil Power C (0 Hz): Coil Power DC: Insulation Sys

Size: px
Start display at page:

Download "MGNETIC LTCHING RELYS / 0ML 8 / 88ML L X W X PRODUCT H (INCHES) FETURES COIL Standard oltage C: DC: Coil Power C (0 Hz): Coil Power DC: Insulation Sys"

Transcription

1 SECTION LTCHING, SEQUENCE ND STEPPER RELYS TO MPERES /0ML 8/88ML B 8 PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

2 MGNETIC LTCHING RELYS / 0ML 8 / 88ML L X W X PRODUCT H (INCHES) FETURES COIL Standard oltage C: DC: Coil Power C (0 Hz): Coil Power DC: Insulation System Per UL Standard : UNITS 0/0 Hz W.0 x. x.0 IMPULSE SEQUENCING RELY - WY TERMINLS, SOLDER, PLUG-IN, OR 0.8 QUICK CONNECT, HOLDS LST SET POSITION WITH NO POWER REQUIRED,, / 0,, 8, /.8.8 Class B ().8 x. x..0 x. x.0 PERMNENT MGNETIC LTCHING RELY PIN OCTL SOCKET DUL COIL LTCHING SELF-MINTINING SET ND RESET COILS MINTINS LST POSITION WITHOUT POWER C OR DC COILS OPTIONL BLOWOUT MGNET OPTIONL SILER TIN OXIDE CONTCTS,, / 0, 0,,, 8, /.0. Class B () PERMNENT MGNETIC LTCHING RELY -WY TERMINLS, SOLDER, PLUG-IN OR 0.8 QUICK CONNECT DUL COIL LTCHING SELF-MINTINING SET ND RESET COILS MINTINS LST POSITION WITHOUT POWER C OR DC COILS OPTIONL SILER TIN OXIDE CONTCTS,, / 0, 0 / 0,.. Class B () CONTCTS CTS Contact Configuration: Contact Material: Contact Resistance (Initial): Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): m Oh Hp Hp DPDT Silver alloy, gold flashed DPDT Silver alloy, gold flashed PDT SPDT-DM-DB Silver alloy, gold flashed TIMING Operate Time: Release Time: DIELECTRIC STRENGTHS Coil to Contacts: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: megoh minimum@dc 0 DC or 0. W DC or 0. W DC or 0. W LIFE EXPECTNC NCY Rated Load (C): no Load : 0,000,000,000 0,000,000,000 0,000,000,000 MISCELLNEOUS Cover Protection Category: Weight: MTING SOCKETS SEE SECTION IP gra D8-, 0-0D-,0--, 0--, 0--, 0-0-, , 0--, 0--, 0-8-, 0-8-, GENCY PPROLS LS... PGE NUMBER C US PENDING C US C US File No. E File No. E PGE PGE, PGE 8,

3 MECHNICL LTCHING RELYS B 8.0 x. x.0. x. x..0 x. x.. x. x. PERMNENT MGNETIC LTCHING RELY 0. TERMINLS, SOLDER, OR QUICK CONNECT OPTIONL OPTIONL CLSS F INSULTION DUL COIL LTCHING SELF-MINTINING SET ND RESET COILS MINTINS LST POSITION WITHOUT POWER C OR DC COILS OPTIONL BLOWOUT MGNET OPTIONL STUD, FLNGE OR DIN MOUNT COIL MECHNICL LTCHING RELY SINGLE LEEL SOCKET WIRING CONTINUOUS DUTY COILS BOTH COILS MY BE ENERGIZED T SME TIME OPTIONL BLOWOUT MGNET OPTIONL BIFURCTED CONTCT UP TO PST OR PDT COIL MECHNICL LTCHING RELY POLES PER COIL C & DC COILS 0.8 QUICK CONNECT OR SOLDER DIN OR PNEL MOUNT BOTH COIL MY BE ENERGIZED T THE SME TIME UP TO PDT POLES PER COIL SEQUENCE (STEPPING) RELY SINGLE COIL CONTINUOUS DUTY CONTCT TRNSFER MINERLIZING OR INDUSTRIL PLUG-IN CONSTRUCTION / 0,.. Class B (), Class F (),,, / 0, 0 / 0,,, 8, /.0.0 Class B (),,, / 0, 0 / 0,,, 8, /.0. Class B (), Class F (),,, / 0, 0 / 0,,, 8, /.0.0 Class B () DPDT Silver alloy, gold flashed to 00 UP TO PST OR PDT Silver alloy, gold flashed 0 0 None None DPDT, PDT & PDT SIlver alloy, gold flashed 0 / / to 00 DPDT Silver alloy, 0 0 None None DC or 0. W 0 DC or 0. W 000 DC or 0. W 0 DC or 0. W ,000,000,000 0,000,000,000 0,000,000,000 0,000,000, D D C US File No. E C US File No. E C US PENDING PGE, PGE, PGE, C US File No. E PGE,...

4 LTCHING, SEQUENCE, STEPPER ND IMPULSE RELYS PPLICTION DTD Latching relays are often confused with sequence, or stepper, and impulse relays. These are in fact three distinctly different types of devices, although in many cases one might be used to mimic the function of another. LTCHING RELYS Latching relays require one pulse of coil power to move their contacts in one direction, and another, separate one to move them back. Repeated pulses from the same input have no effect. Latching relays are useful in applications where power must be conserved since they require none to maintain their last position, or where it is desirable to have a relay that stays where it was during an interruption of power. They are most often divided into two sub- categories, magnetic latch and mechanical latch. Magnetic latch relays employ either a permanent or remanent magnet to hold their last set Position. The permanent magnet type has the advantage, in that it will not lose its memory no matter how long it is left in one position, while the remanent type if left latched will eventually lose its magnetic charge and drop out. It will also operate backwards if the reset side is subjected to excessive voltage, while the permanent magnet types will tolerate extreme overvoltage to either input without malfunction or damage. The rest of this discussion will address only permanent magnet types. Permanent magnet latch relays can have either single or dual coils. They will operate in one direction when power is applied with one polarity, and will reset when polarity is reversed on the single coil types, or when properly polarized voltage is applied to the reset coil of a dual version. Most dual coil types can also be used as single coil versions if necessary or desirable. Nearly all C controlled magnetic latch relays have single coils that employ steering diodes to differentiate between operate and reset commands. Mechanical latching relays use a catch device to hold their contacts in their last set Position until commanded to change state, usually by means of energizing a second coil. These types are often constructed in such a manner that when the operate coil is energized the contacts will go to the operated position regardless of whether the reset coil is energized or not. They will stay in that position only if the reset coil is not energized when power is removed from the operate side. This operate coil dominant operation can be especially useful in certain applications where it is desirable to have the relay function as a non-latching type unless an event has occurred, at which time the reset coil is de-energized. Packaging machinery that places several units into a single container would be a good example. SEQUENCE RELYS Sequence or stepper relays change the state of their contacts upon successive pulses of power to a single coil. Most employ some form of ratchet and cam assembly that requires several pulses to make one revolution of the ca. Many, but not all, have their ca arranged so that each contact transfers with each pulse. That is, if a contact is open it will close, if closed it will open. By utilizing two sets of double-throw contacts, these devices can perform a number of useful functions. They are most commonly used to equalize wear on two devices that are used to perform a single function. s each command for a device to operate is received, the one that did not operate last is energized. One of the most common uses of this function is sewage lift stations where two pumps sit side by side with only one operating at a time in normal service. Sequence relays can also be used to perform other repetitive functions by altering the arrangement or number of lobes on their ca. For example, a sequence could be set up controlling two loads with successive pulses where one would come on, then the other, then both, then both would go off. Literally any such sequence is possible that has a number of steps that will divide evenly into the number of pulses required to rotate the cam one full turn. CM CM IMPULSE RELYS FIGURE OPEN CONTCT CLOSED CONTCT Impulse relays are a form of sequence relay that will only perform the first function described earlier, each contact transfers on each pulse. In many cases the ter sequence and impulse can be used interchangeably, but not all. Many impulse relays are made up of a magnetic latch relay and a solid state steering circuit that, upon application of power, determines which position the relay is in and energizes the opposite coil. The contacts transfer and hold that position when power is removed. When reenergized the contacts transfer again and hold that position, and so on. Impulse relays can be used as wear equalizers. They are also well suited for applications such as turning a single device on or off from one or more locations with a single momentary switch or push button at each station. For example, a conveyor could be started and/or stopped from multiple locations by means of a single button at each position....

5 IMPULSE SEQUENCING RELY C US File No. E FETURES ELECTRONIC STEERING CIRCUIT PERMNENT MGNETIC LTCH DPDT, MPS BENEFITS TOGGLES LODS ON/OFF (LOD SHRING) HOLDS LST POSITION INDEFINITELY WIRING DIGRM (IEWED FROM PIN END) () () () () () () () 8 () () INDUSTRY STNDRD BLDE BSE LED INDICTORS GENERL SPECIFICTIONS (@ ) COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTNC NCY Rated Load (C): no Load : MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: UNITS % ± W PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com ma megoh IP gra DIRECTLY REPLCES OTHER MNUFCTURES ISULLY INDICTES STEERING DIRECTION Class B () Intermittent Silver alloy, gold flashed DC or 0. W ,000,000,000 ny Molded plastic Clear Polycarbonate 0 + () B-() INPUT SIGNL LTERNTE NEM OR IEC ( ) NUMBERS TYPE IS N LTERNTING RELY USED IEWED FROM PIN SIDE FOR LOD SHRING OR TOGGLING ON / OFF OF ONE LOD. ECH MOMENTRY PULSE, OR RE - PPLICTION OF INPUT OLTGE TOGGLES RELY CONTCT. ONCE TRNSFERRED RELY POSITION IS MINTINED INDEFINITELY BY INTERNL MGNETS. L.E.D DIN DPTER -C.8 (.8) TOP OR SIDE MOUNT SLOTS FOR BRCKET DPTERS TOP OR SIDE MOUNT BRCKET DPTERS ORDERED ND SHIPPED SEPRTELY OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 0.8 x 0.00 (. x 0.08) 0. TYP. (.0).0 MX. (.) QUICK CONNECT/SOLDER TERMINLS.0 (0.8) FLNGE DPTER -C STNDRD PRT NUMBERS. MX. (.) NOMINL INPUT OLTGE C OPERTED, MP XBXCL- C XBXCL-0 0 C DC OPERTED, MP XBXCL-D XBXCL-D XBXCL-D Mating Socket 0-- See section DC DC DC...

6 /0ML OCTL BSE MGNETIC LTCHING RELY C US File No. E FETURES PIN OCTL BSE: BENEFITS ESILY INSTLLED IN EXISTING OR REDILY ILBLE SOCKETS MP CONTCT RTING: PERMNENT MGNET LTCHING MECHNISM: CCOMMODTES MOST CONTROL CIRCUIT LODS STYS IN LST SET POSITION INDEFINITELY WITH NO EXTERNL POWER REQUIRED GENERL SPECIFICTIONS (@ ) COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: UNITS % ± W ma Class B () Single coil Continuous Dual coil intermittent Silver alloy, gold flashed DC or 0. W MGNETIC LTCHING RELY WITH PIN OCTL BSE. OPERTES BY PULSED INPUT. PERMNENT MGNET MINTINS LST POSITION. DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTNC NCY Rated Load (C): no Load : megoh ,000,000, MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: IP gra ny Molded plastic Clear Polycarbonate 0 0 PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

7 /0ML OCTL BSE MGNETIC LTCHING RELY DPDT, MPS WIRING DIGRM (IEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS)..8MX (.) RESET () () () () () 8 () COM () () () () (). MX. (.). (.). (.) 8 PIN OCTL BSE NOT SHOWN 8 C OPERTE RESET (+) () () () () () 8 () (-) () () () (-) () () (+) DC OPERTE LTERNTE NEM OR IEC ( ) NUMBERS IEWED FROM PIN SIDE ORDERING CODE XBX C -0 CLSS: CONTCT CONFIGURTION: DPDT: XBX OPTIONS: MGNETIC BLOWOUT: CODE SILER TIN CONTCTS: CODE PLIN COER: CODE C DUL COIL: CODE D (DC ONLY) SINGLE COIL: NO CODE COIL OLTGE:,,, 0, 0/, 0 DD FOR C COILS,,, 8, DD D FOR DC COILS PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com STNDRD PRT NUMBERS NEW PRT NUMBER SUPERCEDES C OPERTED SINGLE COIL, MP XBXC- W0MLCPX-8 XBXC-0 W0MLCPX- XBXC-0 W0MLCPX- DC OPERTED DUL COIL, MP XBXCD-D W0MLCPX- XBXCD-D W0MLCPX- XBXCD-D W0MLCPX-8 Mating Sockets 0-0D8-, 0-0D-, 0--, 0--: SCREW/DIN 0--, 0-0-: SCREW/PNEL See section COIL NOMINL INPUT OLTGE C 0 C 0 C DC DC DC OPERTE OLTGE MIN.. C C C 8. DC. DC DC RETROFITS IDEC RRKP-U, SEE END OF SECTION FOR CROSS REFERENCE NOMINL RESISTNCE (OHMS) 0 W,000 W,00 W 88/88 W 0/0 W 000/000 W...

8 8/88ML SQURE BSE MGNETIC LTCHING RELY C US File No. E Recognized Component mark for Canada and the United States. COMPLIES WITH REQUIREMENTS OF IEC STNDRDS -- ND -- LOW OLTGE DIRECTIE IEC = INTERNTIONL ELECTROTECHNICL COMMISSION CE TESTING ND ELUTION PERFORMED BY THE UNDERWRITERS LBORTORIES S THIRD PRTY PRTICIPNT * * * FETURES PIN BLDE TERMINL SQURE BSE: CONSERTIE MP CONTCT RTING: MP 00 C CONTCT RTING: BENEFITS CCEPTS STNDRD 0.8 QUICK CONNECT TERMINLS S WELL S EXISTING REDILY ILBLE SOCKETS WILL TOLERTE SIGNIFICNT CCIDENTL OERLODS WITHOUT PREMTURE FILURE CCOMMODTES NERLY LL CONTROL CIRCUIT OLTGES GENERL SPECIFICTIONS (@ ) COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: UNITS % ± W ma Class B () Single coil Continuous Dual coil intermittent Silver alloy, gold flashed DC or 0. W MGNETIC LTCHING RELY WITH SQURE BSE. OPERTES BY PULSED INPUT. PERMNENT MGNET MINTINS LST POSITION. DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: megoh LIFE EXPECTNC NCY Rated Load (C): no Load : 0,000,000, MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: IP gra ny Molded plastic Clear Polycarbonate 0 8 PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

9 8/88ML SQURE BSE MGNETIC LTCHING RELY DPDT, MPS WIRING DIGRM (IEWED FROM PIN END). MX. (8.8) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). QUICK CONNECT/SOLDER / PLUG-IN TERMINLS () () () () () () B () RESET OPERTE () SINGLE COIL (DC).0 MX. (.).0 MX. (8.). MX. (8.8) 8 () () () () RESET () () 8 () COMMON OPERTE B () () SINGLE COIL (C) B () RESET () () () () () () 8+ () OPERTE B () () DUL COIL (DC) LTERNTE NEM OR IEC ( ) NUMBERS IEWED FROM PIN SIDE ORDERING CODE CLSS: CONTCT CONFIGURTION: DPDT: XBX PLIN COER: CODE C 8 XBX C -0 COIL OLTGE:,,, 0, 0/, 0 DD FOR C COILS,,, 8, DD D FOR DC COILS PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com STNDRD PRT NUMBERS EQUILENT PRT NUMBERS C OPERTED, SINGLE COIL, MP 8XBXC-0 W88MLCPX- DC OPERTED, SINGLE COIL, MP 8XBXC-D 8XBXC-D W88MLCPX- W88MLCPX- DC OPERTED, DUL COIL, MP 8XBXCD-D W88MLCPX- 8XBXCD-D W88MLCPX- Mating Sockets 0--: SCREW/DIN, 0--: SOLDER 0-8-, 0-8-: PRINTED CIRCUIT 0--: QUICK CONNECT See section COIL NOMINL INPUT OLTGE 0 C DC DC DC DC NOMINL RESISTNCE (OHMS),000 W 0 W 0 W 88/88 W 0/0 W...

10 SQURE BSE POWER MGNETIC LTCHING RELYS FETURES BENEFITS C US File No. E 0.0 QUICK CONNECT/ SOLDER TERMINLS: MM CONTCT GPS: COMPCT DESIGN: WIDE SELECTION OF COER STYLES ND OPTIONS: SIMPLE INSTLLTION, WILL CCEPT FULLY INSULTED (BOOTED) TERMINLS MEETS NERLY LL INTERNTIONL REQUIREMENTS FOR SPCING HNDLES CONTCTOR LODS IN CONTROL RELY PCKGE. CN BE CUSTOMIZED S NEEDED WITHOUT EXCESSIE COST OR MINIMUMS GENERL SPECIFICTIONS (@ ) MGNETIC LTCHING RELY WITH SQURE BSE. OPERTES BY PULSED INPUT ND MINTINS LST POSITION. COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: UNITS % ± W ma Class B () Class F () Continuous Silver alloy, gold flashed to 00 DC or 0. W THE CLSS RELY HS BEEN DESIGNED FOR INSTLLTION OF FULLY INSULTED 0.0 QUICK CONNECT TERMINLS. CONTCT GPS RE MILLIMETERS WIDE TO MEET MOST STNDRDS FOR CREEPGE ND CLERNCE. THE OPTIONL MGNETIC BLOWOUT LLOWS FOR HIGH OLTGE DC SWITCHING PPLICTIONS. ITS LTCH MECHNISM KEEPS IT IN ITS LST SET POSITION UNTIL COMMNDED TO CHNGE BY MENS OF SEPRTE SIGNL. DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: megoh LIFE EXPECTNC NCY Rated Load (C): no Load : 0,000,000,000 MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: IP gra ny Molded plastic Clear Polycarbonate PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

11 SQURE BSE POWER MGNETIC LTCHING RELYS ENCLOSED FLNGE MOUNT. MX. (8.8) ENCLOSED DIN MOUNT COER OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS)..0 MX. (8.).0 MX. (.).0 MX. (.8) QUICK CONNECT/SOLDER TERMINLS 0.8 (.). MX. (8.8) DPDT, MPS PRINTED CIRCUIT TERMINLS 0.0 DI. (.) 0.8 (.) 0. (.) 0. (.) WIRING DIGRM (IEWED FROM PIN END) + RESET -B OPERTE XBX DPDT (SINGLE COIL) B RESET.0 MX. (.0) ORDERING CODE COILS: : NO CODE, : CODE F CLSS: - MPS RTING WITH 0. QUICK CONNECT/SOLDER TERMINLS CONTCT RRNGEMENTS: XBX: DPDT, BXX: DPST-N.O. XHX: SPDT - DM -DB, XXB: DPST-N.C. PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com B DIN RIL LOCKING CLIP.0 MX. (.) F XBX C L -0 CONSTRUCTION STYLE: *ENCLOSED, PLIN COER: CODE C ENCLOSED, SIDE FLNGE MOUNT: CODE C ENCLOSED, - TPPED CORE & NTI-ROTTION TB: CODE CS ENCLOSED, - STUD & NTI-ROTTION TB: CODE CS ENCLOSED, TOP FLNGE MOUNT: CODE C ENCLOSED, DIN MOUNT: CODE C TERMINLS STYLE: SOLDER/QUICK CONNECT TERMINLS: NO CODE *PRINTED CIRCUITS TERMINLS: CODE T OPTIONS: L.E.D. STTUS LMP: CODE L (NOT ILBLE W/CODE ) MGNET BLOWOUT: CODE **DUL COIL: CODE D COIL OLTGE:,,, 0, 0 DD FOR C COILS,,, 8, - DD D FOR DC COILS * Note: Code C Recommended To Be Used With Printed Circuit Terminals ** Note: Dual Coil Not vailable On Xbx Contact rrangement ENCLOSED STYLE CHOICE OF - STUD OR TPPED CORE WITH NTI ROTTION TB. STNDRD PRT NUMBERS 0. (.) CONTCT CONFIGU- RTION NOMINL INPUT OLTGE C OPERTED, SINGLE COIL, MP BXXC-0 XBXC-0 DPST-N.O DPDT 0 C 0 C DC OPERTED, SINGLE COIL, MP XBXC-D XBXC-D XBXC-D DPDT DPDT DPDT XBX DPDT (C SINGLE COIL) DC DC DC DC OPERTED, DUL COIL, MP XHXCD-D SPDT-N.C.-N.O. DC (DB-DM) RETROFITS POTTER & BRUMFIELD KUB SEE END OF SECTION FOR CROSS REFERENCE RESET OPERTE B BXX DPST - N.O. (C SINGLE COIL) RESET + - OPERTE - +B OPERTE XHX SPDT - N.C. - N.O. (DB - DM), (DUL COIL) COIL NOMINL RESISTNCE (OHMS) 0 W 0 W 0 W 0 W 0 W 0/0 W...

12 B INDUSTRIL PLUG - IN LTCHING RELY C US File No. E FETURES INDUSTRIL PLUG-IN CONSTRUCTION COILS WITH OPERTE COIL DOMINNT MULTIPLE CONTCT RRNGEMENTS ND ILBLE OPTIONS BENEFITS ULTIMTE RUGGEDNESS & RELIBILITY. ERSTILE OPERTION CN BE PURCHSED EXCTLY S NEEDED UL Listed industrial control equipment G when used with 0D socket COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: GOLD DIFFUSED CONTCTS STNDRD GENERL SPECIFICTIONS (@ ) UNITS % ± W ma megoh 8 80 Class B () Continuous Silver alloy, gold flashed 0 None None DC or 0. W WILL NOT TRNISH, LOW CONTCT RESISTNCE FOR THE LIFE OF THE RELY UL CONTCT LOD RTINGS TBLE BREK OLTS MKE CRRY RESISTIE INDUCTIE DC 0 C 0 C 8 DC DC **FOR ERSIONS WITH SUFFIX PERMNENT MGNET BLOWOUTS DC SM* DC DM 0 DC SM 0 DC DM **FOR ERSIONS WITH SUFFIX BIFURCTED CONTCTS 0 C 0 C.... ** RELYS WITH CODE FETURE (CHECK WITH FCTORY FOR UL & CS LISTING) * SM = SINGLE MKE DM = DOUBLE MKE THE CLSS B IS TWO COIL LTCHING ERSION OF THE GENERL PURPOSE TYPE RELY. WHEN THE OPERTE COIL IS MOMENTRILY ENERGIZED, THE RELY MECHNICLLY LTCHES IN THE ENERGIZED POSITION ND REMINS IN THE ENERGIZED POSITION WITH THE POWER REMOED FROM THE COIL. THE SECOND COIL WHEN MOMENTRILY ENERGIZED, PROIDES ELECTRICL RESET OF THE CONTCTS. LL CONTCTS OPERTE FROM COMMON RMTURE TO PREENT CONTCT OERLPPING. COILS RE RTED FOR CONTINUOUS DUTY. NUCLER QULIFIED ERSIONS RE ILBLE. CONTCT THE FCTORY FOR DETILS. LIFE EXPECTNC NCY Rated Load (C): no Load : 0,000,000, MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: IP gra ny Molded plastic Clear Polycarbonate 0 PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

13 B INDUSTRIL PLUG - IN LTCHING RELY UP TO PDT, MPS WIRING DIGRM (IEWED FROM PIN END) COIL NOMINL OLTGE 0 0 RESET COIL ( ) RESISTNCE OHMS ±% COIL NOMINL OLTGE / COIL CURRENT (m) RESET COIL (. W) RESISTNCE OHMS ±% COIL CURRENT (m) C COIL DT (0/0 Hz) OPERTE COIL ( ) RESISTNCE OHMS ±% COIL CURRENT (m) OPERTE COIL (.8 W) RESISTNCE OHMS ±% DC COIL DT COIL CURRENT (m) Current inrush on all C coils is less than twice the listed milliamperes ratings as shown in the C coil data table. Currents shown in table measured at 0 Hz. DC relays,.8 Watts (. DC) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).. MX (.) OPERTE OPERTE OPERTE RESET RESET RESET BXBXP (DPDT) BXCXP (PDT) BBXP (DPDT + N. O.) BBXBP ( N.O + N. C.) ORDERING CODE B XCX P LM -0. (.). (.8) CLSS: B COIL LTCH PLUG-IN CONTCT RRNGEMENTS: XBX: DPDT XCX: PDT BX: SPST-NO & FORM C BXB: DPST-NO & FORM B STNDRD FETURES: POLYCRBONTE COER: CODE "P" OPTIONL FETURES: INDICTOR LMP CROSS BOTH COILS: CODE "L" MNUL CTUTOR: CODE "M" LIGHT & CTUTOR: CODE "LM" PERM. MGNET BLOWOUT: CODE "" BIFURCTED CONTCTS: CODE "" DC COIL SUPPRESSION: CODE "" C COIL SUPPRESSION: CODE "" COIL OLTGE:,,, 0, 0 DD "" FOR C COILS,,, - DD "D" FOR DC COILS PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com.8 (.) LOCKING CLIP 8 STNDRD PRT NUMBERS CONTCT CONFIGU- RTION C OPERTED, MP Mating Socket 0D See section COIL NOMINL INPUT OLTGE BBXBP-0 BXBXP-0 BXCXP-0 N.O. + N.C. DPDT PDT 0 C 0 C 0 C DC OPERTED, DUL COIL, MP BBXBP-D DPDT DC NOMINL RESISTNCE (OHMS) 0/0 W 0/0 W 0/0 W 0/0 W...

14 8 DIN / PNEL MOUNTBLE LTCHING RELY C US PENDING FETURES UP TO PDT MP CONTCT: MP 00 C RTING: DIN RIL/PNEL MOUNTBLE: RECTIFIED COILS ON C TYPES: BENEFITS MXIMUM FLEXIBILITY OF USES ESILY HNDLES MODERTELY HEY LODS SUITBLE FOR NERLY LL CONTROL OLTGES RPID INSTLLTION -CN REPLCE EXISTING OPEN TYPES SUCH S POTTER & BRUMFIELD KUB WITHOUT PNEL MODIFICTION RUNS COOLER & QUIETER, USES LESS ENERGY. GENERL SPECIFICTIONS (@ ) COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: UNITS % ± W ma megoh Class B (), F() Intermittent Silver alloy, gold flashed / / to 00 DC or 0. W THE CLSS 8 RELY IS MECHNICLLY LTCHED, ELECTRICLLY RESET RELY, IT CN BE FURNISHED WITH TWO, FOUR OR SIX SETS OF DOUBLE THROW CONTCTS, ND LL POPULR COIL OLTGES. C COIL TYPES INCORPORTE BUILT IN RECTIFIERS FOR MXIMUM COIL EFFICIENCY ND MINIML HETING FOR CONTINUOUS DUTY CPBILITY. LL TERMINLS RE STNDRD 0.8 INCH QUICK CONNECT ND RE LSO PIERCED FOR DIRECT SOLDER CONNECTION IF DESIRED. THE MOLDED PLSTIC DUST COER SNPS ONTO STNDRD DIN RIL, S WELL S INCORPORTING MOUNTING SLOTS THT EXCTLY MTCH POTTER & BRUMFIELD S KUB. UNLIKE MOST MECHNICL LTCH RELYS, THE 8 DOES NOT HE DOMINNT COIL. IF BOTH COILS RE ENERGIZED T THE SME TIME, LL OF THE NORMLLY OPEN CONTCTS CLOSE, ND LL NORMLLY CLOSED CONTCTS OPEN. WHICH EER COIL IS DE-ENERGIZED FIRST, RELESES ND LOCKS THE OTHER SIDE IN ITS ENERGIZED POSITION. LIFE EXPECTNC NCY Rated Load (C): no Load : MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: IP gra 0,000,000,000 ny Molded plastic Clear Polycarbonate PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

15 8 DIN / PNEL MOUNTBLE LTCHING RELY DPDT, PDT & PDT MPS WIRING DIGRM (IEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). COIL B B. (.) 0. (.0).0 (.). (.) 8 B 8 B COIL B 8XBX DPDT (C COIL). (.8) DIN RIL LOCKING. (0.8). (.) COIL B B. (.) QUICK CONNECT/ SOLDER TERMINLS COIL B B COIL B 8 8XBX DPDT (DC COIL) COIL B B 8 COIL B B 8 ORDERING CODE COILS: : NO CODE, : CODE F F 8 XBX -0 CLSS: 8 - MPS RTING WITH 0.8 QUICK CONNECT/ SOLDER TERMINLS CONTCT RRNGEMENTS: XBX: DPDT, XDX: PDT XFX: PDT COIL OLTGE:,,, 0, 0 DD FOR C COILS,,, 8, - DD D FOR DC COILS PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com COIL B B COIL B XDX PDT (C COIL) COIL B XDX PDT (DC COIL) STNDRD PRT NUMBERS C OPERTED, DUL COIL, MP 8XDX-0 PDT 0 C DC OPERTED, MP 8XDX-D 8XDX-D COIL B XFX PDT (C COIL) CONTCT CONFIGU- RTION PDT PDT NOMINL INPUT OLTGE DC DC RETROFITS POTTER & BRUMFIELD KUB SEE END OF SECTION FOR CROSS REFERENCE 8 COIL B XFX PDT (DC COIL) COIL NOMINL RESISTNCE (OHMS) 800/800 W 8/8 W 0/0 W...

16 SEQUENCE (STEPPER) RELY C US File No. E FETURES INDUSTRIL PLUG-IN CONSTRUCTION: TRNSFER ON RELESE ERSION ILBLE : NON-STNDRD SEQUENCES ILBLE BENEFITS RUGGED & RELIBLE EXTR LONG LIFE WHEN LOD IS ENERGIZED ONLY WHEN THE S COIL IS ON. CN BE CUSTOMIZED WITH NY SEQUENCE DIISIBLE INTO EIGHT GENERL SPECIFICTIONS (@ ) COIL Pull-in oltage C (0/0 Hz):< Pull-in oltage DC:< Dropout oltage C (0/0 Hz):> Dropout oltage DC:> Maximum oltage: Resistance Tolerance: Coil Power C (0/0 Hz): Coil Power DC: Insulation System Per UL Standard : Duty: CONTCTS CTS Contact Material: Contact Rating C mperes (C): Contact Rating C oltage: Contact Rating DC mperes (DC): Contact Rating DC oltage: Horse Power (C): Horse Power (C): Pilot Duty (0 Hz): Minimum Recommended Load: TIMING Operate Time: Release Time: UNITS % ± W ma 8 80 Class B () Continuous Silver alloy 0 None None DC or 0. W THE CLSS RELY IS SEQUENCING ERSION OF THE CLSS GENERL PURPOSE RELY. CONTCTS TRNSFER ON ECH IMPULSE TO THE COIL. MODELS RE ILBLE WITH CONTCTS TRNSFERRING WHEN COIL IS ENERGIZED OR WHEN DE-ENERGIZED. DOUBLE CM MOEMENT, ONE CM PER SNP SWITCH, LLOWS ONE OR BOTH CONTCTS TO BE ENERGIZED OR DE-ENERGIZED WITH THE CM ROTTING ONE HLF STEP WHEN THE COIL IS ENERGIZED ND THE OTHER HLF STEP WHEN THE COIL IS DE-ENERGIZED SSURES RELIBLE SEQUENCING OF THE TWO SPDT SNP SWITCHES. DIELECTRIC STRENGTHS Coil to Contacts: cross Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPERTURE TURE Operating, C Lower: Operating, C Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTNC NCY Rated Load (C): no Load : MISCELLNEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: megoh IP gra ,000,000,000 ny Molded plastic Clear Polycarbonate PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com

17 SEQUENCE (STEPPER) RELY DPDT, MPS WIRING DIGRM (IEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).. MX (.). (.) OPERTE XBXP XBXPR* (DPDT) TRNSFER ON RELESE. (.8) LOCKING CLIP.8 (.) 8 ORDERING CODE XBX P R L -0 CLSS: INDUSTRIL PLUG-IN, SEQUENCE RELY, MP, DPDT CONTCT RRNGEMENTS: XBX: DPDT STNDRD FETURES: PLUG-IN WITH POLYCRBONTE COER: CODE P CONTCT TRNSFER: WHEN COIL IS ENERGIZED: NO CODE WHEN COIL IS DE-ENERGIZED: CODE R OPTIONS: INDICTOR LMP: CODE L COIL SUPPRESSION: CODE COIL OLTGE:,,, 0, 0 DD "" FOR C COILS,,, 8, - DD "D" FOR DC COILS PHONE: (8) -8 FX: (8) - EMIL: info@magnecraft.com STNDRD PRT NUMBERS C OPERTED, MP XBXP-0 XBXP-0 XBXPR-0 DC OPERTED, MP XBXP-D XBXPR-D NOMINL INPUT OLTGE 0 C 0 C 0 C DC DC Mating Socket 0D See section COIL NOMINL RESISTNCE (OHMS) 0 W 8 W 0 W 0 W 0 W...

18 SECTION CROSS REFERENCE GUIDE MGNECRFT & STRUTHERS-DUNN POTTER & BRUMFIELD XBXC-D KUR-D- XBXC-D KUR-D- XBXC-8D KUR-D-8 XBXC-D KUR-D- MGNECRFT & STRUTHERS-DUNN XBXC- W0MLCPX-8 XBXC-0 W0MLCPX- XBXC-0 W0MLCPX- XBXCD-D W0MLCPX- XBXCD-D W0MLCPX- XBXCD-D W0MLCPX-8 MGNECRFT & STRUTHERS-DUNN W88MLCPX- 8XBXC-0 W88MLCPX- 8XBXC-D W88MLCPX- 8XBXC-D W88MLCPX- 8XBXCD-D W88MLCPX- 8XBXCD-D MIDTEX -B00 -C00 -D00 -F00 IDEC RRKP-U-C RRKP-U-C0 RRKP-U-C0 RRKP-U-DC RRKP-U-DC RRKP-U-DC POTTER & BRUMFIELD KULS-0 KULDS- KULDS- KULDD- KULDD- MGNECRFT POTTER & BRUMFIELD & STRUTHERS-DUNN 8XDX-0 KB-G-0 OR KUB--0 8XDX-D KB-DG- OR KUB-D- 8XDX-D KB-DG- OR KUB-D- U. S.. MGNECRFT & STRUTHERS-DUNN 00 ORNGE STREET DRLINGTON, SC. - TEL.: (8) - FX: (8) - WEBSITE: EMIL: info@magnecraft.com EUROPE MGNECRFT & STRUTHERS-DUNN OFFICE MUNICH FORSTENRIEDER LLEE D 8 MUNCHEN/GERMNY TEL.: FX: 8 EMIL: renatesteinback@magnecraft.de FOR LTCHING RELYS PPLICTION ENGINEERING SSISTNCE Joe Zintel, PRODUCT MNGER FX: (8) - EMIL: jzintel@magnecraft.com MGNECRFT & STRUTHERS-DUNN OTHER...8 THE CROSS REFERENCE IS INTENDED TO MTCH FOOT PRINT, INTERNL WIRING, ND CONTCT LOD RTINGS. CONSTRUCTION FETURES ND GENERL SPECIFICTIONS SHOULD BE COMPRED IF EXCT REPLCEMENT IS REQUIRED.

388 SQUARE BASE TIME DELAY RELAYS

388 SQUARE BASE TIME DELAY RELAYS 3 SQURE SE TIME DELY RELYS "ON" OR "OFF" DELY FUNCTIONS EXTERNL RESISTNCE DJUSTLE ± 3 % REPETILITY DPDT, 2 MP File No. E52 IEC STNDRDS -- ND -5- LOW VOLTGE DIRECTIVE IEC = INTERNTIONL ELECTROTECHNICL COMMISSION

More information

SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES

SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES Your Contact for Industrial Relays SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES SOCKET COMPATIBLE & FLANGE MOUNT RELAYS RELAY SERIES CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS

More information

SECTION 4 TIME DELAY RELAYS 5 TO 13 AMPERES

SECTION 4 TIME DELAY RELAYS 5 TO 13 AMPERES Your Contact for Relays SECTION 4 TIME DELAY RELAYS 5 TO 3 AMPERES TDRPRO TIME DELAY RELAYS RELAY SERIES L.E.D. STATUS LAMP L W H..5 x.3 x 3.5 OR PIN OCTAL PLUG-IN L W H. x. x. OR PIN OCTAL PLUG-IN L W

More information

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501. Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple

More information

67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp

67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp TD Series - Miniature Time Delay Relays DPDT, PDT, mp E When small size is a requirement series relays fit where others won t. The miniature ice cube timers are capable of handling up to amps. Typical

More information

V DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY

V DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY DT SHEET Plug-in power relays Order code Manufacturer code Description -.. V DC POLE RELY RC -.. V DC POLE RELY (RC) -.. V C POLE RELY Plug-in power relays The enclosed information is believed to be correct,

More information

Flag indicator. Units. V Resistive Resistive Resistive HP HP Pilot Duty ma ~ ~ ~ ~ V V VA W. (Resistive) ms Vrms Vrms Vrms. C C g-n g-n. grams 1.

Flag indicator. Units. V Resistive Resistive Resistive HP HP Pilot Duty ma ~ ~ ~ ~ V V VA W. (Resistive) ms Vrms Vrms Vrms. C C g-n g-n. grams 1. SETION Power Relays/SPDT, mp Rating (D & ) UL US UL Listed When Used With Magnecraft Sockets. Push-To-Test utton Removable Lock-Down Door Flag indicator LED Status Lamp UL Recognized File No. E Finger

More information

Reversible and Proportional Electric Actuators

Reversible and Proportional Electric Actuators Reversible nd Proportionl Electric s The MP s re used for two-position, floting, nd proportionl control of dmpers, vlves, nd progrm switches in heting, ventiltion, nd ir conditioning pplictions or similr

More information

JUMO Wtrans B Programmable Head Transmitter with Radio Transmission

JUMO Wtrans B Programmable Head Transmitter with Radio Transmission Dt Sheet 707060 Seite 1/10 JUMO Wtrns B Progrmmble Hed Trnsmitter with Rdio Trnsmission Brief description The Wtrns B hed trnsmitter with wireless dt trnsmission is used in connection with Wtrns receiver

More information

DPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK

DPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK General Purpose Relay MJN Relay with Plug-in Termination, available in SPDT, DPDT or 3PDT models Rugged power driver offers superior 3/16 through-air and 3/8 over-surface spacing Interlocked frame and

More information

Table of Contents. CII Mid-Range Relays

Table of Contents. CII Mid-Range Relays Table of Contents TD2 Series Time Delay Relays, per MIL-PRF-83726/28, /29, /30, & /31..........5-2 5-5 Double-pole, Electrically Held, 5 mps and Less FC-205 Series.................................................5-6

More information

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge

More information

DPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK

DPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK General Purpose Relay MJN Relay with Plug-in Termination, available in SPDT, DPDT or 3PDT models Rugged power driver offers superior 3/16 through-air and 3/8 over-surface spacing Interlocked frame and

More information

Preliminary. Datasheet

Preliminary. Datasheet Features/Benefits IP68 sealed to endure harsh environments,000,000 life cycle Longer solder leads for ease of wire installation Multiple housing styles Up to 5 resistive load Wirelead options available

More information

F Series Pushbutton Switches

F Series Pushbutton Switches Switches Features/Benefits Up to poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SR24A-MF Prmeterisle rotry ctutor for ll vlves Nominl torque 20 Nm Nominl voltge AC/DC 24 V Control Modulting DC (0)2...10 V Vrile Position feedck DC 2...10 V Vrile echnicl dt Electricl

More information

Series AE W PFC INDUSTRIAL POWER SUPPLY

Series AE W PFC INDUSTRIAL POWER SUPPLY FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry

More information

Products no longer available

Products no longer available echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck

More information

FTU263. Ripple Control Receiver. Technical Data. Load Management Ripple Control

FTU263. Ripple Control Receiver. Technical Data. Load Management Ripple Control Lod Mngement Ripple Control Ripple Control Receiver FTU263 Technicl Dt The FTU263 comines the functionlity of ripple control receiver nd full clendr time switch. The FTU263 receiver is suited for opertion

More information

! MINIMAL DIMENSIONS! MINIMAL MAINTENANCE! RELIABILITY! MARKET ORIENTATION

! MINIMAL DIMENSIONS! MINIMAL MAINTENANCE! RELIABILITY! MARKET ORIENTATION - MEDIUM VOLTAGE APPARATUS, Inc. MEDIUM VOLTAGE VACUUM CIRCUIT BREAKERS Series FOR INDOOR INSTALLATION! TRADITION! OWN DEVELOPMENT! QUALITY MANAGEMENT! ENVIRONMENT PROTECTION! MINIMAL DIMENSIONS! MINIMAL

More information

Parallel Actuator Cut-off Control PAS 3 a

Parallel Actuator Cut-off Control PAS 3 a K G Pneumtik GmbH In der Kruse 48 549 Eschweiler Deutschlnd / Germny. 49 (0) 4 03 / 99 50 0 ; 49 (0) 4 03 / 655 30 _ Info@kgpneumtik.de # www.kgpneumtik.de Smoke nd Het Exhust Pneumtic Electronic Control

More information

KRPA, KRP, KA, KR series

KRPA, KRP, KA, KR series Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting

More information

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet EVC24A-MF Prmeterisle gloe vlve ctutor for 2-wy nd 3-wy gloe vlves Actuting force 2500 N Nominl voltge AC/DC 24 V Control modulting DC (0)2...10 V Vrile Nominl stroke 40 mm Actuting time

More information

CONTURA Rocker Switches

CONTURA Rocker Switches CONTUR Rocker Switches Dimensional Specifications: in. [mm] CONTUR II STYLE SHOWN WITH SQURE LENS.90[.].9[9.09].0[.].0[.] X.0[.7].079[7.0].0[9.7].90[9.90].90[.] SE W/RRIERS.09[.] SWITCH SHOWN WITH VCH

More information

Connection Technology

Connection Technology Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *

More information

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File

More information

Carbon Composition Resistors

Carbon Composition Resistors Dimensions Cron Composition Resistors Rtings nd Dimensions Type L Specifiction Limit nd Performnce d D Derting Curve 8 6 4 (/, w) Test procedures, sequence of test, etc., refer to MIL-STD D nd JIS-C-5.

More information

62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay

62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay 62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced

More information

62 Series - Power relays 16 A. Features / /

62 Series - Power relays 16 A. Features / / 6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between

More information

PCB Relay. --- G2R-1-SN --- G2R-2-SN LED indicator with test

PCB Relay. --- G2R-1-SN --- G2R-2-SN LED indicator with test PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE0 (VDE approval: C0 insulation grade), UL08, CSA., SEV, SEMKO. Meets VDE0700 requirements for household products according

More information

Synchronous Machine Parameter Measurement

Synchronous Machine Parameter Measurement Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions

More information

SPST-NO SPDT DPST-NO DPDT

SPST-NO SPDT DPST-NO DPDT PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements

More information

Synchronous Machine Parameter Measurement

Synchronous Machine Parameter Measurement Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions

More information

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories

RT series Miniature Printed Circuit Board Relays, Sockets and Accessories s 查询 RT40 供应商 捷多邦, 专业 PC 打样工厂,4 小时加急出货 RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets

More information

GEI E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53. GE Protection and Control 205 Great Valley Parkway Malvern, PA

GEI E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53. GE Protection and Control 205 Great Valley Parkway Malvern, PA GEI-6871 9E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53 GE Protection nd Control 205 Gret Vlley Prkwy Mlvern, PA 19355-1337 2 for Semi-flush Mounting (Front View) Connected Rely with Flnge

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SF24A-MF Prmeterisle spring-return ctutor with emergency control function for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 20 Nm Nominl

More information

62.22 Copper side view

62.22 Copper side view 62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,

More information

5A, 100V - 150V Trench Schottky Rectifiers

5A, 100V - 150V Trench Schottky Rectifiers 5, 00-50 Trench Schottky Rectifiers TSPB5H00S - TSPB5H50S ETURES - Patented Trench Schottky technology - Excellent high temperature stability - Low forward voltage - Low power loss/ High efficiency - High

More information

Synchronous Generator Line Synchronization

Synchronous Generator Line Synchronization Synchronous Genertor Line Synchroniztion 1 Synchronous Genertor Line Synchroniztion Introduction One issue in power genertion is synchronous genertor strting. Typiclly, synchronous genertor is connected

More information

On/off valves with spool position monitoring

On/off valves with spool position monitoring On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,

More information

MECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS

MECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS MECHNICL RF STT FOR GREENSTR HE, SiII & i JUNIOR MODELS INSTRUCTION MNUL FITTING & OPERTING INSTRUCTIONS CONTCT INFORMTION MNUL INFORMTION WORCESTER OSCH: TECHNICL: 08705 4 SERVICE: 08547 50 SPRES: 0905

More information

General Purpose Relays Types K, R, N, and C

General Purpose Relays Types K, R, N, and C General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description............................................. Page R Miniature Plug-in Relays.............................. K Plug-in

More information

Incremental encoders Solid shaft with square flange pulses per revolution

Incremental encoders Solid shaft with square flange pulses per revolution Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce

More information

Regular InGaAs Photodiodes IG17-Series

Regular InGaAs Photodiodes IG17-Series Description The IG7series is pnchromtic PIN photodiode with nominl wvelength cutoff t.7 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt resistnce

More information

Table of Contents. Kilovac Time Delay Relays

Table of Contents. Kilovac Time Delay Relays Table of Contents 1600/1700 Series, Delay on Operate, Fixed & Adjustable......................8-2, 8-3 2400 Series, Subminiature, Delay on Operate, Fixed.............................8-4 5600/5700 Series,

More information

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system) Incrementl encoders Solid shft with clmping or synchro flnge 1 6556 pulses per revolution progrmmle (interpolted system) EIL580P - solid shft - OptoPulse Fetures Size mm Precise opticl sensing (interpolted)

More information

AD6C Form A Solid State Relay DESCRIPTION ABSOLUTE MAXIMUM RATINGS* OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM APPROVALS PARAMETER UNIT MIN TYP MAX

AD6C Form A Solid State Relay DESCRIPTION ABSOLUTE MAXIMUM RATINGS* OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM APPROVALS PARAMETER UNIT MIN TYP MAX DESCRIPTION The is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. With a high blocking voltage (6V), it is designed to replace electromechanical relays in high

More information

SGM4582 High Voltage, CMOS Analog Multiplexer

SGM4582 High Voltage, CMOS Analog Multiplexer High Voltage, CMOS nalog Multiplexer GENERL DESCRIPTION The is a high voltage, CMOS analog IC configured as two 4-channel multiplexers. This CMOS device can operate from ±1.8V to ±5.5V dual power supplies

More information

FOR DEVICES SOLD PRIOR TO

FOR DEVICES SOLD PRIOR TO 23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions

More information

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input

More information

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure Sfety Rely Unit G9 CSM_G9_DS_E The G9 Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s

More information

Magnecraft Printed Circuit Board & Reed Relays. Catalog

Magnecraft Printed Circuit Board & Reed Relays. Catalog Magnecraft Printed Circuit Board & Reed Relays Catalog 2010 Contents Series Overview....................................................3 117SIP Relays.....................................................4

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet RF24-MF-O Communictive rotry ctutor with emergency control function for ll vlves Nominl torque 2.5 Nm Nominl voltge AC/DC 24 V Control Modulting DC ()2...1 V Position feedck DC 2...1 V

More information

500mA LED PROTECTOR APPLICATIONS

500mA LED PROTECTOR APPLICATIONS 500m LED PROTECTOR FETURES 5V Protection activating Voltage 500m Bypass Current Capability 1V Bypass Dropout Voltage 500m Reverse Current Capability 8KV ESD Protection 2-Lead 2mm x 2mm FBP Package DESCRIPTION

More information

40.4. Control Relays and Timers. Contents. D3PR/D3PF Series. General Purpose Plug-In Relays. Features. Standards and Certifications

40.4. Control Relays and Timers. Contents. D3PR/D3PF Series. General Purpose Plug-In Relays. Features. Standards and Certifications Control Relays and Timers. D Series Relay Contents Description Page DPR/DPF Series................................ DPR/DPF Series................................ DPR/DPF Series Catalog Number Selection........................

More information

Extended InGaAs Photodiodes IG26-Series

Extended InGaAs Photodiodes IG26-Series Description The IG26series is pnchromtic PIN photodiode with nominl wvelength cutoff t 2.6 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt

More information

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket

More information

* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions

* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions *23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the

More information

NP10 DIGITAL MULTIMETER Functions and features of the multimeter:

NP10 DIGITAL MULTIMETER Functions and features of the multimeter: NP10 DIGITL MULTIMETER. unctions nd fetures of the multimeter: 1000 V CT III tri requencies from 10.00...10 M. Diode mesurement nd continuity testing. HOLD mesurement. Reltive mesurement. Duty cycle (%)

More information

Non-repetitive peak on-state pulse current 10/1000μs 5/310μs 2/10μs. Non repetitive surge peak on-state current (sinusoidal) 60Hz 0.

Non-repetitive peak on-state pulse current 10/1000μs 5/310μs 2/10μs. Non repetitive surge peak on-state current (sinusoidal) 60Hz 0. DESCRIPTION This device is especially designed to protect subscriber line card interfaces (SLIC) against transient overvoltages. Positive overloads are clipped with 2 diodes.negative surges are suppressed

More information

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...

More information

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).

Power PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6). Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity

More information

APT60GT60JR SOT-227 G E

APT60GT60JR SOT-227 G E V 93 The Thunderbolt IGBT is a new generation of high voltage power IGBTs. Using Non-Punch Through Technology the Thunderbolt IGBT offers superior ruggedness and ultrafast switching speed. Low Forward

More information

Controls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution

Controls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution Controls Solid-Stte Switching Devices Reference Mnul April 2009 Low-Voltge Controls nd Distribution Controls Solid-Stte Switching Devices 4 Introduction Solid-Stte Switching Devices 5 Generl dt Solid-Stte

More information

POWER PANEL INSULATION TEST

POWER PANEL INSULATION TEST POWER PNEL INSULTION TEST 1 VOLTGE MPCITY PNEL WITHSTND RTING MIN MLO NO. FEEDER BREKERS NO. FEEDER DISCONNECTS FED FROM OF LODS EQUIPMENT TEMPERTURE TEMPERTURE CORRECTION FCTOR TO, TCF TEST VOLTGE kvdc

More information

PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load

PCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.

More information

Model Number Structure

Model Number Structure General-purpose Relay MK-I/-S Electromechanical Relays Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long

More information

OMRON MK-I / -S RELAY

OMRON MK-I / -S RELAY Issued April 0 0 DATA SHEET OMRON MK-I / -S RELAY Based on OMRON Datasheet General-purpose Relay MK-I/-S 0 Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks

More information

354B SERIES SHAWNEE II High Speed Predetermining

354B SERIES SHAWNEE II High Speed Predetermining 354B SERIES SHAWNEE II High Speed Predetermining DIMENSIONS INCHES MILLIMETERS The 354B Directly Replaces 354A. A compact version of the 334 counter, the ATC 354B is its exact functional duplicate. Packaged

More information

SPECIFICATION OUTLINE

SPECIFICATION OUTLINE ECO DESCRIPTION DTE BY 001 5479 PRODUCTION RELESE 10/02/2009 GF 5663 OMIT PRODUCT ND SERIL NUMBER LBEL DETIL REPLCE PPROPRITE SE REFERENCES WITH ISO REFERENCES ENHNCE REGULTORY REQUIREMENTS TBLE 5/26/2010

More information

G2RL-1A G2RL-1 G2RL-2A G2RL-2

G2RL-1A G2RL-1 G2RL-2A G2RL-2 9 PCB Relay High Capacity, Low Profile Relay Low profile:.7 mm max. in height Cadmium-free contacts ensuring environment-friendly use 0 kv impulse surge withstand Clearance and creepage distance: 0 mm/0

More information

SPST-NO SPDT DPST-NO DPDT

SPST-NO SPDT DPST-NO DPDT PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0

More information

Three-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator)

Three-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator) Three-Phse Synchronous Mchines The synchronous mchine cn be used to operte s: 1. Synchronous motors 2. Synchronous genertors (Alterntor) Synchronous genertor is lso referred to s lterntor since it genertes

More information

Extremely small "footprint" and the highest circuit density available AK550. Front Wire Entry

Extremely small footprint and the highest circuit density available AK550. Front Wire Entry FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet NV24A--RE Communictive gloe vlve ctutor for 2-wy nd 3-wy gloe vlves Actuting force 1000 N Nominl voltge AC/DC 24 V Control modulting, communictive DC (0)2...10 V Vrile Nominl stroke 20

More information

M81711FP MITSUBISHI SEMICONDUCTORS <LVIC> GENERAL PURPOSE DRIVER

M81711FP MITSUBISHI SEMICONDUCTORS <LVIC> GENERAL PURPOSE DRIVER MITSUBISHI SEMICONDUCTORS GENERL PURPOSE DRIER DESCRIPTION is a dual inverter type general purpose driver by 24 rating voltage. PIN CONFIGURTION (TOP IEW) FETURES RTING OLTGE... 24 OUTPUT CURRENT...

More information

CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.

CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. V 3 Fast IGBT The Fast IGBT is a new generation of high voltage power IGBTs. Using Non-Punch Through Technology the Fast IGBT offers superior ruggedness, fast switching speed and low Collector-Emitter

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet LRF24- Communictive rotry ctutor with emergency control function for ll vlves Nominl torque 4 Nm Nominl voltge AC/DC 24 V Control Modulting DC (0)2...10 V Vrile Position feedck DC 2...10

More information

General-purpose Relay

General-purpose Relay General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical

More information

GEH-2024E Supersedes GEH INSTRUCTIONS MULTICONTACT AUXILARY RELAY. TYPE HFASl. www. ElectricalPartManuals. com. GENERAL fl ELECTRIC

GEH-2024E Supersedes GEH INSTRUCTIONS MULTICONTACT AUXILARY RELAY. TYPE HFASl. www. ElectricalPartManuals. com. GENERAL fl ELECTRIC INSTRUCTIONS MULTICONTACT AUXILARY RELAY TYPE HFASl GENERAL fl ELECTRIC E Supersedes 0 MULTICONTACT AUXILIARY RELAY TYPE HFASl DESCRIPTION The HFASl relys re instntneous, hinged-rmture, multi-contct, uxiliry

More information

mj P D Watts T J,T STG T L CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.

mj P D Watts T J,T STG T L CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. V 58 The Thunderbolt IGBT is a new generation of high voltage power IGBTs. Using Non-Punch Through Technology the Thunderbolt IGBT offers superior ruggedness and ultrafast switching speed. Low Forward

More information

2 or 4 pole changeover contact Plug-in/Faston 187

2 or 4 pole changeover contact Plug-in/Faston 187 56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free

More information

Sealed Toggle Switches. Contact Material Q silver plated R gold plated G gold over silver K tin plated

Sealed Toggle Switches. Contact Material Q silver plated R gold plated G gold over silver K tin plated E E TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q terminal) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000

More information

General-purpose Relay

General-purpose Relay General-purpose Relay Exceptionally Reliable General-purpose Relay Features Mechanical Indicator/Push Button Breaks relatively large load currents despite small size. Long life (minimum 0,000 electrical

More information

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features: RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator

More information

PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US

PCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique

More information

20 Series Power Relays

20 Series Power Relays Power Relays 0 Technical Data... Specification... Model Number Structure - Power Relays...3 Model Number Selection... - 7 Accessories... Mounting Clips... Electrical Characteristics... Dimensions... Instructions...3

More information

FEATURES APPLICATIONS. SiP32467, SiP32468 C OUT EN EN GND. Fig. 1 - Typical Application Circuit

FEATURES APPLICATIONS. SiP32467, SiP32468 C OUT EN EN GND. Fig. 1 - Typical Application Circuit 50 mω, Slew Rate Controlled Load Switch in WCSP DESCRIPTION The and are slew rate controlled integrated high side load switches that operate in the input voltage range from 1.2 V to 5.5 V. This series

More information

Series 354. SHAWNEE II High-Speed Digital Predetermining Counter. The 354B Directly Replaces 354A. COUNTERS PRODUCT HIGHLIGHTS

Series 354. SHAWNEE II High-Speed Digital Predetermining Counter. The 354B Directly Replaces 354A. COUNTERS PRODUCT HIGHLIGHTS Series 354 SHAWNEE II High-Speed Digital Predetermining Counter The 354B Directly Replaces 354A. A compact version of the 334 counter, the ATC 354 is its exact functional duplicate. Packaged in a 72mm

More information

OPEN STYLE POWER RELAYS

OPEN STYLE POWER RELAYS 199 OPEN STYLE POWER RELAYS SPDT, DPDT, DPST-N.O., SPST-N.C.-D.B. & SPST-N.O.-D.M., 10 TO 50 AMPS LISTED 367G UL Listed File No. E43641 199 SPDT 30 AMP, 1-1/2 Hp 199 SPST--DB 30 AMPS, 2 Hp PLIES WITH REQUIREMENTS

More information

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN RMMING MNUL MTM/01 MTMV/01 FB00329-EN Generl precutions Red the instructions crefully efore eginning the instlltion nd crry out the ctions s specified y the mnufcturer. The instlltion, progrmming, commissioning

More information

.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES

.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.

More information

A3134. Discontinued Product

A3134. Discontinued Product 3134 Bipolar Hall Effect Switch for High-Temperature Operation Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no

More information

MBRA130LT3G NRVBA130LT3G. Surface Mount Schottky Power Rectifier. SMA Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES, 30 VOLTS

MBRA130LT3G NRVBA130LT3G. Surface Mount Schottky Power Rectifier. SMA Power Surface Mount Package SCHOTTKY BARRIER RECTIFIER 1.0 AMPERES, 30 VOLTS MBR13LT3G, NRVB13LT3G Surface Mount Schottky Power Rectifier SM Power Surface Mount Package This device employs the Schottky Barrier principle in a metal to silicon power rectifier. Features epitaxial

More information

Lab 8. Speed Control of a D.C. motor. The Motor Drive

Lab 8. Speed Control of a D.C. motor. The Motor Drive Lb 8. Speed Control of D.C. motor The Motor Drive Motor Speed Control Project 1. Generte PWM wveform 2. Amplify the wveform to drive the motor 3. Mesure motor speed 4. Mesure motor prmeters 5. Control

More information

Ordering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications

Ordering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications Latching Relay MMK CSM_MMK_DS_E_1_1 Mechanically Latching Relays Based on the MM Power Relay Low power consumption due to mechanical latch for economic operation. Relays with mixed coil specifications

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet NR24A- Communictive rotry ctutor for ll vlves Nominl torque Nominl voltge AC/DC 24 V Control Modulting DC (0)2...10 V Vrile Position feedck DC 2...10 V Vrile Conversion of sensor signls

More information

NORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS

NORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS 40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc

More information

SPECIFICATIONS MATERIALS. Terminations M1 M2 M3 M51 M52 M53 M54 M6 M6N M7 VS2 V2N VS3 VS4 VS5

SPECIFICATIONS MATERIALS. Terminations M1 M2 M3 M51 M52 M53 M54 M6 M6N M7 VS2 V2N VS3 VS4 VS5 M Series Minature SPECIFICTIS CTCT RTING: Dependent upon contact material See page. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated

More information