WaveReady Multi-Degree Reconfigurable Optical Add/Drop Multiplexer WRS-05AD1C00B

Transcription

1 WaveReady Multi-Degree Reconfigurable Optical Add/Drop Multiplexer WRS-05AD1C00B Data Sheet

2 The flexible, powerful WaveReady Reconfigurable Optical Add/Drop Multiplexer (ROADM) node wavelength switching and channel grooming solution enables wavelength-agile dense wavelength division multiplexing (DWDM) optical networks. Leveraging the industry-leading Lumentum wavelength selective switch (WSS) and optical channel monitoring (OCM) technology, the WaveReady ROADM uses advanced microelectromechanical system (MEMS) technology to enable flexible wavelength planning in DWDM systems. It also provides the capability to dynamically manage add/drop and pass-through optical power levels to compensate for individual channel degradation, amplifier gain tilt, or broadband loss changes. The WaveReady ROADM can be managed remotely via TL1, SNMP, or through the WaveReady Node Manager GUI platform and supports all WaveReady DWDM transponder and amplifier products. Key Benefits Upgrade and maintain DWDM networks while in-service Simplify network management with intelligent channel turn-up and maintenance at the node level Provide advanced optical power management Applications Enables wavelength agile networks Provides high-capacity DWDM ring interconnect with N-degree flexibility Enables management of amplified add/drop networks with active power balancing Enables linear and ring architectures requiring wavelength reuse Compliance ITU-T G694.1 GR-63-CORE and GR-1089-CORE (NEBS 3) West Client Inputs East Client Inputs { Expansion Ports { West Add/Drop Expansion Ports West OA West OA East OA East Add/Drop 1x5 VOA Select 1 OCM 2 3 East In West Out 4 Express West In 5 1x5 VOA Select OCM East Out Express 44 Functional diagram 2

3 Using the WaveReady ROADM COM-200 West +DCM East +DCM WR3500F East Equipment West Equipment WRS-051 WRS-051 Line Out WRS-051 DWDM Line In DCM WRS-051 DWDM 1 DWDM MD DWDM MD WaveReady ROADM Node Configuration WaveReady ROADM View in WaveReady Node Manager 3

4 Specifications Optical Characteristics Parameter Minimum Typical Maximum Channel center wavelengths Channel spacing nm THz Add/drop interconnects GHz Insertion loss add channels 2.5 db 4.2 db 7 db Insertion loss drop channels Combined insertion loss pass-through channels (No EDFA) Input power range (per wavelength) Input power (all wavelengths) Channel power setting accuracy Channel bandwidth Channel isolation Blocking channel isolation Channel attenuation range Switching time 35 db 35 db 7.5 db nm THz 12.7 db 15 db 40 to +12 dbm ITU ±12.5 GHz 0 to 15 db Polarization dependent loss 0.6 db 1 db Polarization mode dispersion Optical return loss Input optical power sum of all channel ports Physical Characteristics Size (H x W x L) excluding mounting brackets Rack mounting options Optical connector type (all ports) Fiber type Electrical and Management Interfaces Electrical power input 40 db +12 dbm ±1 db 3 s 1 ps 300 mw 44.5 x x mm (1.75 x 17.4 x 11 in) ETSI 300 mm, 19- or 23-inch EIA/WECO LC/PC bulkhead 9/125 µm single-mode Redundant 48 V DC inputs Input operating voltage 40 to 57.5 V DC Power consumption 30 W Management interfaces Environmental Characteristics Operating ambient temperature Short term Extended term Storage temperature TL-1, SNMPv2c or WaveReady Node Manager via COM-200 communication interface +10 to +40 C 5 to +55 C 40 to +85 C Relative humidity (non-condensing) 5 to 95% The specifications indicate are worst case, end-of-life over specified temperature and wavelength range. 4

5 Ordering Information Description WaveReady Multi-Degree Reconfigurable Optical Add/Drop Multiplexer (ROADM) Associated Parts WaveReady Communication and Management Module with Built-in OSC (COM-300) WaveReady Communication and Management Module (COM-200) max. output power: 17 db max. output power: 17 db, 1510 nm add/drop filters max. output power: 17 db, 1510 nm add/drop filters, and tilt capable max output power: 19 db max output power: 19 db, 1510 nm add/drop filters max output power: 19 db, 1510 nm add/drop filters, and tilt capable Product Code WRS-05AD1C00B COM300ET003Yxx.x. See Sheet for current features and part numbers. COM200ET003Yxx.x. See Sheet for current features and part numbers. -217C0001B -217CSC01B -217CSC02B -C0001B -CSC01B -CSC02B North America Toll Free: LITE (5483) Outside North America Toll Free: LITE (5483) China Toll Free: LITE (5483) 2015 Lumentum Operations LLC Product specifications and descriptions in this document are subject to change without notice. wrroadm-ds-cms-tm-ae