Type SF Motor-Run and Power Supply Capacitors Oil Filled/Impregnated, AC Rated, Metallized Polypropylene Capacitors

Transcription

1 ype F Motor-Run and ower upply apacitors Oil Filled/Impregnated, Rated, Metallized olypropylene apacitors pecifcations lick here to view hardware ype F, rated metallized polypropylene capacitors provide starting torque and power factor correction for split phase motors typically used in refrigeration and air conditioning motorrun applications. ype F also may be used to provide noise suppression, voltage regulation and line current reduction in power supply applications. ighlights - elf healing - Fault current protection up to 10,000 amps F - Low energy consumption tine, 1/4 quick connect lug terminals are standard - Meets EI tandard EI UL recognized File Number E File Number apacitance Range µf to 1 µf apacitance olerance ±10% standard, ± 6% and ±3% available Rated Voltage 240 Vac to 660 Vac Operating emperature Range 40 º to 70 º standard, 90 º available issipation Factor <0.1% ervice Life Objective 60,000 h with 94% survival rate Ro ompliant ervice Life Objective he service life objective for this series is 60,000 hours of operating life with a 94% survival rate when operated at full voltage, 60 z, and rated ambient temperature. capacitors are frequently used at voltages and ambient temperatures other than rated conditions. ervice life may be estimated under specifc conditions of temperature and voltage by using the curves as shown below and to the right. apacitance vs. emperature he apacitance vs. emperature curve may be used to determine the capacitance change as a function of temperature. apacitance varies by no more than ±3% over the operating temperature range. apacitance vs. emperature Life vs. emperature % of Rated Life Life vs. Voltage E ornell ubilier 1605 E. Rodney French Blvd. New Bedford, M hone: (508) Fax: (508)

2 ype F Motor-Run and ower upply apacitors Oil Filled/Impregnated, Rated, Metallized olypropylene apacitors art Numbering ystem F K 291 B -F eries ase Volt ase Material ap ol. ±% an eight VR Ro F = 1 1/4" Oval 24 = 240 Vac = luminum 7 = 7.0 µf L = ±3% 238 = " = 2 way 70º ompliant B = 1 1/2 Oval 37 = 370 Vac w/steel cover 35 = 3 µf = ±6% 291 = " B = 4 way 70 º -F = ompliant = 1 3/4" Oval 44 = 440 Vac K = ±10% 388 = 3.88" = 2 way 90 º = " Oval 66 = 660 Vac 475 = 4.75" = 4 way 90 º = 1 3/4" Round 488 = 4.88" E = ual 2,3,4 70 º = " Round F = Forks 70 º = 2 1/2" Round G = Forks 90 º = Forks 100 º J = Forks, 70 º Res. Options apacitors in aluminum cases with mounting studs, are available upon request. ighter capacitance tolerances such as ±3% or ±6% are available. +90 ratings are available for I lighting and power supply applications. ischarge resistors are available. pecial terminal lugs such as 2 tines plus 1 fork lug are available. K = Forks, 90 º Res. L = Forks 100 º Res. Z = Other ual capacitance values are available for 370 Vac and 440 Vac applications. E ornell ubilier 1605 E. Rodney French Blvd. New Bedford, M hone: (508) Fax: (508)

3 ype F Motor-Run and ower upply apacitors Oil Filled/Impregnated, Rated, Metallized olypropylene apacitors Oval Ratings Oval ase tyle* ap. ase luminum atalog ap. ase luminum atalog.81" ±.06" ode art Number ode art Number 240V F244K219B-F F443K219B-F ±.06" F245K219B-F F443K156B-F F246K219B-F F444K219B-F 7.5 F247.5K219B-F F444K156B-F B ±.06" F2410K219B-F F445K219B-F.50" Max. F2415K288B-F F446K288B-F F2420K288B-F 7.5 F447.5K288B-F 2 F2425K291B-F F4410K388B-F " -.06" 3 F2430K291B-F F2435K291B-F F44K388B-F 3.88 F44K291B-F F2440K291B-F F4415K388B-F F2445K291B-F F4415K291B-F 50.0 F2450K291B-F 17.5 F4417.5K291B-F imensions (Inches) 60.0 F2460K391B-F F4420K391B-F ase ode B B 2.69 ee Ratings able F2470K391B-F 370V F372K219B-F F372K156B-F F373K219B-F F4425K391B-F F4430K391B-F F4435K391B-F F4440K391B-F F4445K391B-F onstruction etails ase Material Encapsulation erminal Material luminum Enviromentally afe ielectric Fluid in lated teel F373K156B-F F374K219B-F F374K156B-F F375K219B-F F375K156B-F F376K219B-F F4450K391B-F F4455K391B-F F4460K391B-F 660V F661K156B-F F661K219B-F *Note: he capacitor s safety pressure interrupter is designed to disconnect the capacitor element as the cover expands upward due to gas pressure build up. atastrophic failure may result if movement of the cover and or terminals are restricted. Rigid bus bars are not recommended as they may restrict movement of the cover or terminals. ustomers are advised to provide at least 0.5 clearance above the cover to allow for its expansion F376K156B-F F377.5K219B-F F3710K288B-F F37K288B-F F3715K288B-F F3717.5K291B-F F3720K291B-F F3720K388B-F F3725K291B-F F3730K291B-F F662K156B-F F662K219B-F F663K288B-F F664K288B-F F665K388B-F 3.88 F666K388B-F 3.88 F668K475B-F 4.75 F668K291B-F F6610K475B-F 4.75 F6610K291B-F 3 F3735K291B-F 1 F6612K391B-F F3740K391B-F F6615K391B-F 4 F3745K391B-F 18.0 F6618K391B-F 50.0 F3750K391B-F F6620K391B-F 2 F6625K391B-F F442K219B-F F6630K391B-F F442K156B-F 3 F6635K475B-F 4.75 F6640K475B-F 4.75 E ornell ubilier 1605 E. Rodney French Blvd. New Bedford, M hone: (508) Fax: (508)

4 ype F Motor-Run and ower upply apacitors Oil Filled/Impregnated, Rated, Metallized olypropylene apacitors Round Ratings Round ase tyle ±.06".81" ±.06" ase ode (Inches) onstruction etails ase Material Encapsulation erminal Material.50" Max. +.12" -.06" ee Ratings able luminum Enviromentally afe ielectric Fluid in lated teel Note: he capacitor s safety pressure interrupter is designed to disconnect the capacitor element as the cover expands upward due to gas pressure build up. atastrophic failure may result if movement of the cover and or terminals are restricted. Rigid bus bars are not recommended as they may restrict movement of the cover or terminals. ustomers are advised to provide at least 0.5 clearance above the cover to allow for its expansion. ap ase ode luminum atalog art Number 370V F372K238B-F F373K238B-F F374K238B-F F375K238B-F F376K238B-F F377.5K238B-F F3710K238B-F F37K238B-F F3715K238B-F F3717.5K238B-F F3720K238B-F F3725K284B-F F3730K284B-F F3735K291B-F F3740K291B-F F3745K384B-F F3750K384B-F F3755K384B-F F3760K291B-F F3765K291B-F F3770K291B-F F3775K391B-F F3780K391B-F F3790K475B-F F37100K475B-F F442K238B-F F443K238B-F F444K238B-F ap. ase ode luminum atalog art Number F445K238B-F F446K238B-F 7.5 F447.5K238B-F F4410K238B-F F44K238B-F F4415K284B-F F4417.5K284B-F 2.84 F4420K284B-F F4425K291B-F F4430K291B-F 3 F4435K291B-F F4440K391B-F 4 F4445K391B-F 50.0 F4450K391B-F 5 F4455K391B-F 60.0 F4460K475B-F V F662K238B-F F663K238B-F F665K238B-F 7.5 F667.5K284B-F 2.84 F6610K284B-F 2.84 F66K291B-F F6615K384B-F 17.5 F6617.5K391B-F F6620K391B-F 2 F6625K475B-F 4.75 F6630K475B-F F6635K475B-F 4.75 F6640K475B-F 4.75

5 Notice and isclaimer: ll product drawings, descriptions, specifcations, statements, information and data (collectively, the Information ) in this datasheet or other publication are subject to change. he customer is responsible for checking, confrming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. ll Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. tatements of suitability for certain applications are based on the knowledge that the ornell ubilier company providing such statements ( ornell ubilier ) has of operating conditions that such ornell ubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter and ornell ubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. he Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. ny technical advice inferred from this Information or otherwise provided by ornell ubilier with reference to the use of any ornell ubilier products is given gratis (unless otherwise specifed by ornell ubilier), and ornell ubilier assumes no obligation or liability for the advice given or results obtained. lthough ornell ubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. ccordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. lthough all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.