Expand Your Factory Radio. add. ipod. Harness Connection. Dip Switches USB. Port 1 Port. 2 (See Manual) Owner s Manual Media Gateway PXAMG PGHGM5

Transcription

1 Expand Your Factory Radio Harness Connection add ipod Dip Switches Port 1 Port 2 (See Manual) USB GM Owner s Manual Media Gateway PXAMG PGHGM5 Rev Inst007

2 Table of Contents Pages 1. Introduction 2 2. Precautions 2 3. Compatibility Notes 3 4. Dipswitch Settings 3 5. Installation 4 6. ipod Operation HD Radio Operation (if equipped) 6 8. Sirius Operation (if equipped) 7 9. Selecting Aux Input 8 10.Selecting Factory Satellite 8 (if equipped) 11. Troubleshooting Warranty Info 10

3 (See Manual) Media Gateway & Optional Add-ons Factory Radio Not Included Media Gateway Harness Part #: PGHGM5 *The Media Gateway will only support 2 inputs. Media Gateway Part #: PXAMG Harness Connection Port 1 Port 2 Dip Switches USB OR OR HD Radio ipod Input OR OR OR Satellite Radio ISBT21 AUX Input 1

4 1. Introduction Thank you for purchasing the isimple Media Gateway. The Media Gateway is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your ipod performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the Media Gateway. The Media Gateway allows connectivity for ipod, Sirius Satellite Radio tuner (SCC1 sold seperately) and the HD Radio tuner (HDRT sold separately), enabling full control of these devices from the factory installed radio. It also retains original system features such as satellite radio and rear seat entertainment (if equipped). 2. Precautions UPDATING ipod FIRMWARE Updating the firmware prior to installation or future firmware updates for your ipod may affect the features and functions described in this manual. PREVENTING DAMAGE TO YOUR VEHICLE OR ipod. To eliminate the risk of an electrical short, we recommend disconnecting the vehicle s battery prior to installation. If you do not feel comfortable making these connections, we suggest you seek professional installation. We recommend that the ipod be disconnected from the interface when the vehicle is not in use. PROPER MOUNTING LOCATION Securely install the interface in a location free from; heat, humidity, moving parts, sharp metal edges or direct sunlight. We recommend securing the interface to a suitable location using; double sided tape, Velcro TM or zip-ties. 2

5 3. Compatibility Notes Your vehicle MUST either be equipped with, or have the ability to support Satellite Radio..4. Dipswitch Settings Vehicles With Navigation All Other Vehicles 3

6 5. Installation 1. When making electrical connections it is always recommended that the vehicle s battery be disconnected from the electrical system before performing the installation. Please Note: If the radio is equipped with a built in CD Changer, please remove ALL discs before proceeding to prevent damage to the radio s CD mechanism. 2. Carefully remove the trim panels covering the 7mm bolts that secure the radio into the dash cavity. Remove these bolts, and carefully pull the radio from the dash of the vehicle. This will provide access to the factory radio connectors where you will connect the Media Gateway harness. 3. Disconnect the factory 24-Pin harness and 12-Pin harness (if present) from the back of the radio. Disconnect the antenna from the radio. 4. Connect the 8-Pin ipod docking cable into the first port on the Media Gateway (farthest away from dipswitches). Carefully run the 11 foot ipod cable behind the dash to the location where the ipod will be mounted or stored (for example the glove box or center console). This location will vary based on the vehicle, and the customer s prefrence. When running this cable through the dash be sure to secure it away from moving parts or sharp metal edges that may damage the cable. 5. Connect the 8-Pin auxiliary input cable to the second port (closest to the dipswitches) on the Media Gateway if an additional auxiliary input is desired. 6. If connecting the HD Radio Tuner (HDRT sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot HD Radio Cable (8-Pin mini-din to 8-Pin mini-din) cable into the second port (closest to the dipswitches) on the Media Gateway. Connect the other end of this cable into the HD Radio tuner. Connect the factory antenna cable into the antenna connection on the HD Radio tuner (HDRT). 7. If connecting the Satellite Radio tuner (SCC1 sold separartely), make the folllowing connections before connecting the PXAMG to the vehicle. Plug the black end of the 3 foot ISSR11 (8-Pin mini-din to 8-Pin mini-din; sold seperately) into the second port (closest to the dipswitches) on the Media Gateway. If you are installing the Satellite Radio Tuner with the HDRT, connect the ISSR11 cable to the port farthest from the dipswitches. Connect the gray end of this cable into the Satellite Radio tuner. 8. If connecting the ISBT21 (sold separartely), make the folllowing connections before connecting the PXAMG to the vehichle. Plug the 3 foot ISBT21 Cable (8-Pin mini-din to 8-Pin mini-din) cable into the first port (farthest from the dipswitches) on the Media Gateway. Connect the other end of this cable into the ISBT21. Connect the microphone cable into the 3.5 mm connection on the ISBT21. 4

7 9. Plug in the male connectors on the PGHGM5 harness into the 24-pin port and 12- pin port on the back of the radio. Next, connect the factory 24-pin and 12-pin harness (if available) into the female connectors on the PGHGM5 harness. Be sure to make a firm connection but do not force it. Plug the Black micro-fit 24-pin connector on the PGHGM5 harness into the PXAMG Media Gateway box. 10. To complete the installation secure the Media Gateway (PXAMG) and HD Radio tuner (HDRT) or Satellite Radio tuner (SCC1) into the cavity in the dash behind the radio. Be sure that the cables and interface modules are not near moving parts or sharp metal edges as they may damage the cables. To prevent rattling noises inside the dash, use zip ties, tape, or other fasteners to mount the interfaces securely. 11. With all connections made, reconnect the vehicle s battery, insert the key into the ignition, and turn the vehicle on. Check for proper operation of the Media Gateway and HD Radio tuner before reinstalling the factory dash panels. 12. Note: The first time you access the Gateway, your radio may display DEV INIT while the device is initializing. If this is displayed, please wait one minute then cycle the ignition off and on. Then access SAT mode again to begin normal Gateway operation. 6. ipod Operation Entering Mode Select Menu Press the BAND button a few times until XM is displayed on the screen. Turn the rotary TUNE KNOB until IPOD is displayed. Press PRESET 6 to select the displayed mode. Next Track Turn the rotary TUNE KNOB clockwise one notch to advance to the next track. Previous Track Turn the rotary TUNE KNOB counter-clockwise one notch to move back to the previous track. Fast Forward Press PRESET 2 repeatedly to fast forward the song that is playing. Rewind Press PRESET 1 repeatedly to rewind the song that is playing. Entering BROWSE Menu / Select Press PRESET 3 to enter the browse menu or to make a selection while in the browse menu. 5

8 Menu UP Press PRESET 4 to move back one step in the browse menu Exit Browse menu After 10 seconds of inactivity the menu will time out and return to normal operation. Random Press Preset 6 to turn Random on/off Repeat Press Preset 5 to turn Repeat on/off 7. HD Radio Operation Entering Mode Select Menu Press the BAND button a few times until XM is displayed on the screen. Turn the rotary TUNE KNOB until HD RADIO is displayed. Press PRESET 6 to select the displayed mode. Tune Up Turn the rotary TUNE KNOB clockwise to manually tune up. Seek Up Press the SEEK> button to seek up to next available station. Tune Down Turn the rotary TUNE KNOB counter-clockwise to manually tune down. Seek Down Press the <SEEK button to seek down to the next available station. Changing Bands Press the BAND button to switch between AM and FM bands. Store Presets Tune to the station you wish to store as a preset. Press and hold the desired preset button for 2 seconds. A beep will be heard when the station has been stored sucessfully. Recall Presets Press the preset button (1-6) for the preset you wish to recall. Changing Display Press the DISPL button to toggle between HD artist and HD title. 6

9 8. Sirius Satellite Radio Operation Entering Mode Select Menu Press the BAND button a few times until XM is displayed on the screen. Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once SIRIUS is displayed, press PRESET 6 to select the displayed mode. Channel Up Turn the rotary TUNE KNOB clockwise to move up through the channels Channel Down Turn the rotary TUNE KNOB counter-clockwise to move down through the channels Category Up Press the SEEK> button to move up through the categories. Category Down Press the <SEEK button to move down through the categories. Store Presets Tune to the station you want to store as a preset. Press and hold the preset button on which you want to store the channel. Recall Presets Press the preset button that corresponds with the channel you want to recall. Changing Display: Press the DISPL button to display artist and track information 7

10 9.Selecting AUX Input Entering Mode Select Menu Press the BAND button a few times until XM is displayed on the screen. Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once AUX is displayed, press PRESET 6 to select the displayed mode. 10. Selecting Factory Installed XM Radio Entering Mode Select Menu Press the BAND button a few times until XM is displayed on the screen. Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once SAT is displayed, press PRESET 6 to select the displayed mode. Factory Sat Operation Refer to the owners manual that came with your factory radio. 8

11 11. Troubleshooting Symptom Cause Remedy Radio shows ipod not connected ipod cable is not connected to ipod or Gateway. Verify the docking cable is connected to the Media Gateway, and the ipod I can not correctly control the ipod through the radio. I have updated my ipod s firmware and still have control issues I don t see ipod artist or song information on the screen I can t use my ipod s click wheel to select music The Media Gateway does not recognize the HD Radio tuner (HDRT) Radio shows DEV INIT When I listen to the factory AM or FM radio there is only static, no audio. No AM or FM reception using the HD Radio source HD Radio station quality fluctuates or is lost randomly The ipod firmware may be out of date. Sometimes the ipods needs to be reset The radio is displaying a different text field The ipod is in external control mode. This allows text to be displayed on the radio screen The HD tuner was not properly connected when the PXAMG was first connected and initialized. Gateway device is initializing Factory antenna cable is connected to the HD Radio tuner. Factory antenna cable is not connected to the HD Radio tuner (HDRT) The HD Tuner is temporarily losing reception of the Digital HD Radio broadcast signal Update ipod firmware Press and hold the click wheel (center button) and the menu button for 10 seconds. This will reboot the ipod. YOU WILL NOT LOSE MUSIC on the ipod by doing this reset Press the Text / Scan button to see text Press the Aux / Sat button and select AUX 2 source to control the ipod manually using the click wheel HDRT must be connected before the PXAMG is powered on. Disconnect the PXAMG from the vehicles harness for 5 minutes. Verify the 8 pin DIN HDRT cable is securely connected at both ends before reconnecting the vehicle harness. This only occurs the first time the PXAMG is powered on. Wait a few minutes, cycle ignition off and on then enter SAT Mode. Use Gateway to access HD Radio source. This will provide all AM and FM reception for your vehicle. Remove from factory radio, connect into HDRT module. Note* some vehicles need to use the supplied antenna adaptor to make this connection. This is expected performance. The Digital HD Radio playback will resume in areas of higher broadcast signal strength. 9

12 12. Warranty One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized isimple dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by isimple authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to installation expenses. Attempting to service or modify this unit, operating this unit under conditions other than the recommended voltage will render this WARRANTY VOID. Unless otherwise prescribed by law, isimple shall not be liable for any personal injury, property damage and or any incidental or consequential damages of any kind (including water damage) resulting from malfunctions, defects, misuse, improper installation or alteration of this product. All parts of this isimple product are guaranteed for a period of 1 year as follows: Within the first 12 months from date of purchase, subject to the conditions above, isimple will repair or replace the product at their discretion, if it is defective in material or workmanship providing it is returned to an Authorized isimple dealer, with PROOF OF PURCHASE from an authorized isimple dealer. Warning: This equipment may be reset by unintentional electrostatic discharge during operation. Exposure to direct sunlight or extreme heat may cause damage or malfunction. FCC Class B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Re-orientate or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that of which the receiver is connected. 4. Consult the dealer or an experienced radio / television technical for help. Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 10

13

14 GM ipod OK to Disconnect MENU **READ THIS FIRST** Changing Sources (ipod, HD Radio, *Satellite Radio, AUX) Press the Band button until XM is displayed. Press the Seek button until the source you want is displayed. Press Preset 2 to select the source. Preset 1 Press repeatedly to rewind the current track *if available Band Button press to enter into Sat modeor to switch sources within the Media Gateway. Seek Buttons Press Seek to advance to the next track Press Seek to move forward in the browse menu Press Seek to return to the previous track Press Seek to move backwards through the browse menu Browsing Example: To select the song "Star-Spangled Banner" through the Artist category 1) Press Preset #3 to enter the browse menu The radio will display PL:List NAV RPT SEEK NAV VOL BAND CONFIG 2) Press Seek until radio displays AR:Artist Press Preset #3 to select Radio will display AR:All ipod 3)Press the Seek button until Francis Scott Key is displayed Press preset #3 to select The radio will display AL:All DEST Preset 2 Press repeatedly to fast forward the current track Preset 3 Press to enter into the browse menu or to make a selection while in the browse menu Preset 4 Press to move back one step while in the browse menu Preset 6 Press to toggle through the random modes 4) Press the Seek button until Patriot Hits Vol 1 is displayed Press preset #3 to select The radio will display TR: followed by the name of the first track in the selected album 5) Press the Seek button until Star Spangled Banner is displayed Press preset #3 to select The song will begin to play and the display will cycle through the display modes (Actual Radio Appearance may differ from representation.) QRC019

15 GM **READ THIS FIRST** Changing Sources (ipod, HD Radio, *Satellite Radio, AUX) Press the Band button until XM is displayed. Press the Seek button until the source you want is displayed. Press Preset 2 to select the source. *if available Band Button press to enter into Sat mode or to switch sources within the Media Gateway. Seek Buttons Press Seek to seek up to the next available station Press Seek to seek down to the next available station NAV RPT SEEK VOL NAV BAND CONFIG HD Radio DEST Presets 1-6 Press to recall a preset station or press and hold to store a station into memory. HD RADIO EXAMPLE To select an HD radio station. Press Seek or Seek to get to the desired station. The radio will auto lock on to an HD Radio Station if available. When locked into an HD Radio Station, press Seek to access multi cast HD stations (if available). Example: 92.5 HD2 MHZ To store a radio station into preset memory. Press Seek or Seek to get to the desired station. Press and hold the desired preset button (1-6) for three seconds To recall a station stored into memory Recall a preset station by pressing its corresponding preset button (1-6). (Actual Radio Appearance may differ from representation.) QRC019

16

17

18 The HDRT (High Definition Radio Tuner) is an expansion interface for isimple s GateWay. By using the HDRT you will receive the standard analog stations as well as the available HD stations in your area. Connecting the HDRT If GateWay interface has already been installed, remove from the vehicle and leave it disconnected for no less than 5 minutes. The original radio tuner is no longer needed. Disconnect the vehicles antenna from the original radio and connect to the HDRT. A vehicle antenna adapter may be needed in order to change the vehicle antenna connection into the standard Motorola connection type. If you wish to retain the original radio tuner in conjunction with the HDRT you will need a BAWM200 universal windshield mount antenna. DO NOT split the vehicle antenna between the HDRT and the original radio tuner. This will degrade the radio signal for both the HD tuner and the original radio tuner resulting in poor radio reception. Instead connect the vehicle s antenna into the HDRT. Connect the BAWM200 into the factory radio s antenna port.

19 Vehicle Connections: Connect the 2 devices (HD Radio and ipod or AUX) to GateWay vehicle specific interface. The HDRT will connect in place of the AUX or ipod cable. The two selected device cables must be connected to GateWay vehicle specific interface before connecting to the vehicle. Below are interface specific installation notes and operation tips. Make sure to read all notes and tips before connecting to the vehicle. Once connected to the vehicle wait 60 seconds before using the interface. This time is needed for initialization. ISFD571 The HDRT should be connected to Device 2. Switch 2 should be in the down (On) position. Press AUX or SAT button until HD-FM1, HD-FM2, HD-FM3 or HD-AM is displayed. SEEK will seek up to the next available station based on signal strength. SEEK will seek down to the next available station based on signal strength. Pressing and holding SEEK for more than 2 seconds will change from MANUAL to AUTO or from AUTO to MANUAL. The radios display will confirm the selected mode. Storing stations - Tune to the desired station. Press a PRESET 1-6 and hold for approximately 3 seconds until is displayed. To recall a preset station press the desired PRESET button. HD and analog stations can be stored. HD stations are identified by HD1, HD2 or HD-3 following the station frequency. TEXT/SCAN will change the display to show artist or song title if available. ISTY571 The HDRT should be connected to Device 2. Press SAT or AM/SAT until is HD RADIO displayed. Press Preset 3 to select the source. By pressing the AM/SAT or SAT button after has been selected you will switch between HD-FM1, HD-FM2, HD-FM3 or HD-AM. Tune up - turn the rotary TUNE KNOB to the right to move up one frequency at a time. Tune down - turn the rotary TUNE KNOB to the left to move down one frequency at a time.

20 SEEK will seek up to the next available station based on signal strength. SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press Preset 1-6 and hold for approximately 3 seconds until PR SAVED is displayed. To recall a preset station press the desired Preset button. HD and analog stations can be stored. HD Radio stations are indicated by HD1, HD2 or HD3 following the station frequency. TEXT will change the display to show artist or song title if available. Note for vehicles with a diversity antenna: In the large 20-pin main power and audio connector pin 13 is the amplified antenna turn on wire. This wire must be cut from the original connector and attached to pin 11, the radio accessory +12v wire. During SAT emulation this circuit is not energized by the radio. It must be energized for HD radio signal. The circuits can be verified with a volt meter. ISGM575 The HDRT should be connected to Device 2. Press the BAND button until XM is displayed. Turn the rotary TUNE KNOB until HD RADIO is displayed. Wait 4 seconds and the source will be automatically be selected. Pressing the BAND button after HD Radio has been selected will switch between HD-FM and HD-AM. Tune up - turn the rotary TUNE KNOB to the right to move up one frequency at a time. Tune down - turn the rotary TUNE KNOB to the left to move down one frequency at a time. SEEK will seek up to the next available station based on signal strength. SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press Preset 1-6 and hold for approximately 3 seconds until a beep is heard. To recall a preset station press

21 the desired Preset button. HD and analog stations can be stored. HD stations are indicated by HD1, HD2 or HD3 following the station frequency. DISP will change the display to show artist or song title if available. ISGM571 and ISGM572 The HDRT should be connected to Device2. Press the BAND button until is displayed. Turn the rotary TUNE KNOB until is displayed. Press the FWD>> button to select HD Radio as the source. If you are currently in the XM mode you will need to press ISEEK instead of FWD>>. To change between HD-FM and HD-AM press the CAT button until HD1, HD2 or HD3 is displayed. Press a button below the displayed text to select that band. Tune up - Turn the rotary TUNE KNOB to the right to move up one frequency at a time. Tune down - Turn the rotary TUNE KNOB to the left to move down one frequency at a time. ISEEK will seek up to the next available station based on signal strength. SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press FWD>> and use the TUNE knob to select PRE 1-18 will be displayed. Press I SEEK to store the station into memory. To recall a preset station press the FWD>> button and use the TUNE knob to select a preset Press the ISEEK button to select the displayed preset. HD and analog stations can be stored. HD stations are indicated by HD1, HD2 or HD3 following the station frequency. i - will change the display to show artist or song title if available. ISHD571 The HDRT should be connected to Device 2. Press the XM button and then turn the TUNE KNOB until HD-FM is displayed. Press PRESET 6 to select the source. By pressing the XM button after HD-FM has been selected you will switch between HD-FM or HD-AM. Tune up - turn the rotary TUNE KNOB clockwise to move up one frequency at a time. Tune down - turn the rotary TUNE KNOB counter-clockwise to move down one frequency at a time.

22 SEEK > will seek up to the next available station based on signal strength. < SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press PRESET 1-6 and hold for approximately 3 seconds until PR SAVED is displayed. To recall a preset station press the desired Preset button. HD and analog stations can be stored. HD Radio stations are identified by HD1 or HD2 following the station frequency. DISP will change the display to show artist or song title if available. ISHY571 & ISHY572 The HDRT should be connected to Device 2. Press the XM button until HD-FM1, HD-FM2, HD-FM3 or HD-AM is displayed. Tune up - turn the rotary TUNE KNOB clockwise to move up one frequency at a time. Tune down - turn the rotary TUNE KNOB counter-clockwise to move down one frequency at a time. SEEK > will seek up to the next available station based on signal strength. < SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press a PRESET 1-6 and hold for approximately 3 seconds until PRSAVED is displayed. To recall a preset station press the desired PRESET button. HD and analog stations can be stored. HD stations are identified by HD1or HD2 following the station frequency. INFO will change the display to show artist or song title if available. ISNI571 & ISNI572 Radios Equipped with a RADIO or FM/AM/SAT button: The HDRT should be connected to Device 2. Press the RADIO or FM/AM/SAT button until is SAT displayed. Press the SEEK > button until HD-FM or HD-AM is displayed. Press the < TUNE button to select HD Radio as the source. Tune up - Press the TUNE > button to move up one frequency at a time. Tune down - Press the < TUNE button to move up one frequency at a time.

23 SEEK > will seek up to the next available station based on signal strength < SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press the SCAN button to enter the Preset Menu. Use the SEEK > or < SEEK buttons to select a Preset location. Press TUNE > to store the station into memory. The radio will display PRSAVED. To recall a preset station press the SCAN button to enter the Preset Menu. Use the SEEK > or < SEEK buttons to select a Preset. Press the < TUNE button to select the displayed preset. HD and analog stations can be stored. HD stations are identified by HD1 or HD2 following the station frequency. DISP will change the display to show artist or song title if available. Radios Equipped with a SAT button: The HDRT should be connected to Device 2. Press the FM button and then the SAT button. Press the SEEK > button until HD- FM or HD-AM is displayed. Press the < TUNE button to select HD Radio as the source. Tune up - Press the TUNE > button to move up one frequency at a time. Tune down - Press the < TUNE button to move up one frequency at a time. SEEK > will seek up to the next available station based on signal strength < SEEK will seek down to the next available station based on signal strength. Storing stations - Tune to the desired station. Press the SCAN button to enter the Preset Menu. Use the SEEK > or < SEEK buttons to select a Preset location. Press TUNE > to store the station into memory. The radio will display PRSAVED. To recall a preset station press the SCAN button to enter the Preset Menu. Use the SEEK > or < SEEK buttons to select a Preset. Press the < TUNE button to select the displayed preset. HD and analog stations can be stored. HD stations are identified by HD1 or HD2 following the station frequency. DISP will change the display to show artist or song title if available. ISVW571 & ISVW572 (Touareg Non-Nav ONLY): The HDRT should be connected to Device 2. Press the SAT button. Press the CAT/FLDR button until HD-FM or HD-AM is displayed. Wait 3 seconds and the radio will select HD Radio as the source. Tune up - Turn the TUNE KNOB clockwise to move up one frequency at a time.

24 Tune down - Turn the TUNE KNOB counter-clockwise to move down one frequency at a time. SEEK SEEK will seek up to the next available station based on signal strength. will seek down to the next available station based on signal strength. Storing & Recalling Presets (Panasonic Radios): Tune to the desired station. Press the TUNE KNOB to enter the Preset Menu. Use the CAT/FLDR or CAT/FLDR buttons to select a Preset location. Press the TUNE KNOB to store the station into memory. The radio will display PRSAVED. To recall a preset station press the TUNE KNOB to enter the Preset Menu. Use the CAT/FLDR or CAT/FLDR buttons to select a Preset. Wait 3 seconds and the radio will select the displayed preset. HD and analog stations can be stored. HD stations are indicated by HD1 or HD2 following the station frequency. Storing & Recalling Presets (Delphi Radios): Tune to the desired station. Press and hold a PRESET 1-6 and hold for approximately 3 seconds until the radio displays PRSAVED. To recall a preset station, press the desired PRESET button. HD and analog stations can be stored. HD stations are identified by HD1 or HD2 following the station frequency. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the HDRT be held liable for consequential damages sustained in connection with the HDRT. The manufacturer and its distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the HDRT other than its replacement. Discover other OE integration interfaces on our website.