3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC
|
|
- Alfred Marcus Gardner
- 6 years ago
- Views:
Transcription
1 M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving right angle cable exit 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded with foil and braid for additional signal protection Rugged MDR ribbon type contact Rugged thumbscrew retention EMI shielded junction shell on straight end EMI shielded overmolded shell on right-angle end See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: January 20, 2009 TS-2262-C Sheet 1 of Physical Connector Contact Plating: Wiping Area: 0 μ" [0.76 μm] Min. Gold (RIA E1 & C1 apply) Overmolded Shell: Color: Black Material: Polyvinyl Chloride (PVC) Shell: Color: Beige Material: Polyester Elastomer Cable: Color: Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Electrical Voltage Rating: 0 V Current Rating: 1 A Insulation Resistance: > 1 x 10 8 Ω at 100 V DC Withstanding Voltage: 50 V RMS for 1 minute Individually Shielded Twisted Pairs Characteristic Impedence: 100 ± 10 Ω Conductor Size: 28 AWG Stranded Propagation Velocity: 1.25 ns/ft [4.1 ns/m ] Skew (within pair): 50 ps/meter maximum Skew (channel skew per chipset): 50 ps/meter maximum Environmental Temperature Rating: -20 C to +75 C UL File No.: E86982 Camera Link is a certification mark of Automated Imaging Association. Electronic Solutions Division Interconnect Solutions M is a trademark of M Company. For technical, sales or ordering information call
2 M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Right-Angle End Straight End 9.7 [1.56] 9.7 [1.56] 19.4 [0.76] #4-40 Thumbscrews 2X 26 Position High Density Mini D Ribbon (MDR) Male Plug 12.8 [0.51] MDR 26 Position Plug Right-Angle End 42.4 [1.67] Cable Length 2.5 [1.28] Cable Length Tolerance is the Larger of +50mm / -0mm or +% / -0% MDR 26 Position Plug Straight End H26-SZLM-XXX-0LC 14H26-SZLS-XXX-0LC Use M Jacketsocket 41-1 for mounting receptacle to panel. mm [Inch] Tolerance Unless Noted mm ±.1 ±.01 [ ] Dimensions for Reference Only Ordering Information Right-Angle Orientation M = Position 1 opposite cable S = Position 1 on cable side For lengths greater than 1000 cm refer to Table 2. 14H26 - SZLX - XXX - 0LC Cable Length 050 = 50 cm 00 = 00 cm 600 = 600 cm 100 = 100 cm 50 = 50 cm 700 = 700 cm 150 = 150 cm 400 = 400 cm 800 = 800 cm 200 = 200 cm 450 = 450 cm 900 = 900 cm 250 = 250 cm 500 = 500 cm A00 = 1000 cm TS-2262-C Sheet 2 of Electronic Solutions Division Interconnect Solutions M is a trademark of M Company. For technical, sales or ordering information call
3 M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Camera Connector Medium and Full Configurations Two Channel Link Chips Frame Grabber Table 1 Cable Assembly and Camera Link Pinouts Channel Link Signal Cable Name (reference only) Base Configuration One Channel Link Chip + Camera Control + Serial Communication Camera Connector Frame Grabber Channel Link Signal 1 1 inner shield inner shield 1 1 inner shield inner shield inner shield inner shield 2 25 Y0- Pair X Y0+ Pair X0+ 24 Y1- Pair 2-24 X Y1+ Pair X Y2- Pair X Y2+ Pair X Yclk- Pair Xclk Yclk+ Pair Xclk Y- Pair X Y+ Pair X ohm Pair SerTC terminated Pair SerTC Z0- Pair SerTFG Z0+ Pair SerTFG Z1- Pair CC Z1+ Pair CC Z2- Pair CC Z2+ Pair CC Zclk- Pair CC- 24 Zclk+ Pair CC Z- Pair CC Z+ Pair CC4-1 1 inner shield inner shield 1 1 inner shield inner shield inner shield inner shield Notes: 1. All pairs are individually shielded with aluminum foil. 2. Pair shields are wrapped aluminum out and are in contact with four internal drains (logic ground).. Outer braid and foil (chassis ground) are isolated from inner drains (logic ground). 4. Cable assembly compatible with both Camera Link configurations. First 2 Digits Alpha Code Table 2 Length Codes First 2 Digits Alpha Code First 2 Digits Alpha Code 10 A 17 H 24 R 11 B 18 J 25 S 12 C 19 K 26 T 1 D 20 L 27 V 14 E 21 M 28 W 15 F 22 N 29 Y 16 G 2 P 0 Z For lengths in excess of 1000 cm substitute the corresponding alpha code for the first 2 digits. Example: the code for 1160 cm is B60. TS-2262-C Sheet of Electronic Solutions Division Interconnect Solutions M is a trademark of M Company. For technical, sales or ordering information call
4 Regulatory Information Appendix M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decabde in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 0, Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. RIA-2217B-E
5 Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. RoHS Compliant 2005/95/EC means that the product or part ( Product ) does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. Appendix C2: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-E
6 Appendix C: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by M in writing, this information represents M s best knowledge and belief based upon information provided by third party suppliers to M. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with M s Regulatory Information Appendix, then M s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at M s option, to replace or repair the M product or refund the purchase price of the M product. Except where prohibited by law, M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this M product, regardless of the legal theory asserted. M Electronics Solutions Division 6801 River Place Blvd. Austin, TX U.S.A Please recycle. Printed in USA. M All rights reserved. RIA-2217B-E M is a trademark of M Company.
3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZX-XXX-04C Flexible cable enables moving head applications. For machine vision camera to frame grabber
More information3M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZ3B-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZB-XXX-04C Flexible cable enables moving head applications. Mates to popular M MDR 26 position receptacle
More information3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame
More information3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX
Shrunk Delta Ribbon (SDR) Cable Assembly Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires
More information3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC
M Cable Assembly Supports Industrial CameraLink in Automated Imaging Association for camera to frame grabber communications 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded
More information3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
More information3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36
PRODUCT SPECIFICATION 3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36 PS-0082 Rev. B Page 1 of 8 3M 2012. All rights Reserved Table of Contents Section Content Page Cover page 1 Contents
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.:
More information3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
More information3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
More information3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
More informationMaterial: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
More information3M Scotchlok Insulated Electrical Spring Connector B (Blue)
3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor
More information3M High Routability External MiniSAS Cable Assembly 8G26 Series Product Specification Revised
Page 1 of 7 Product Specification 78-5102-0099-7 Revised 11-16-11 Contents Title Page and Contents......................................................... 1 1.0 Scope....................................................................
More information3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
More informationProduct Specification. 3M Cable Assemblies for QSFP+ FDR Applications, Copper
78-5102-0198-7 A Product Specification 3M Cable Assemblies for QSFP+ FDR Applications, Copper Document Number: 78-5102-0198-7 A Issue Date: Jul 04, 2014 Subject: 3M Cable Assemblies for QSFP+ FDR Applications
More information3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
More informationProduct Data Sheet. 3M SFP+ Direct-Attach Passive Copper Cable Assembly
78-512-114-4 E Product Data Sheet 3M SFP+ Direct-Attach Passive Copper Cable Assembly 3Electronics Materials Solutions Division 681 River Place Blvd. Austin, TX 78726-9 http://www.3m.com/interconnects
More information3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions Contents 1.0 Purpose....................................... 1 2.0 Development Kits..................................
More information3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
More informationProduct Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
More information3M Electrically Conductive Double-Sided Nonwoven Tape 9750
Technical Data October 2013 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 Product Description 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 is an isotropically electrical conductive
More information3M Scotchlok Copper/ Aluminum Compression Lugs, Series
Copper/ Aluminum Compression s, 40000 Series Data Sheet January 2014 Description Agency Approvals and Self Certifications Copper/Aluminum Compression s 40000 Series are made of high conductivity aluminum
More informationProduct Data Sheet. 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper
78-512-114-4 D Product Data Sheet 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper Subject: 3M Cable Assemblies for SFP+ Applications Page: 1 of 14 Table of Contents 1. SCOPE...
More informationDetailed Specifications & Technical Data
For more Information please call 1-800-Belden1 General Description: PTZ (CCTV+Control+Power) Cable, Rated-CM, 1-RG59 20 AWG solid bare copper with foam polyolefin, 95% bare copper braid, 1-22 AWG stranded
More informationTABLE OF CONTENTS. Sliver Cable Assemblies. TE Connectivity Technical Datasheet
TABLE OF CONTENTS Introduction... 2 Description... 2 Features and Benefits... 2 Product Applications... 2 Industry Standards... 2 Technical Documents... 2 Part Numbers... 3 Table 1. Part Number Selection
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
More information3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723
Technical Data November, 2009 M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 Product Description M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 is an isotropically
More informationSignal Integrity Test Report
PD-0098 Signal Integrity Test Report 3M External MiniSAS Cable Assemblies 3 Electronic Solutions Division Subject: 3M External MiniSAS Cable Assembly Page: 1 of 14 Table of Contents 1.0 Scope... 2 2.0
More information3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
More informationDetailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Coax (2-1505A Type) 20 AWG BC, GIFPE isulation, Duofoil plus TC braid (95% cv.), PVC inner jackets. Pairs (4-9451 Type): 22 AWG TC, PP insul.,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
More informationSignal Integrity Product Specification
PD--0077 Signal Integrity Product Specification 3M SFP+ Passive Direct Attach Copper Cable Assembly 3 Electronic Solutions Division Page: 1 of 9 Table of Contents 1.0 Scope... 4 2.0 Product Tested... 4
More information3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
More informationPart Number: 7953A Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor
Part Number: Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor Product Description Four Cat 6 23 AW G solid bare copper conductors, bonded pair polypropylene insulation,
More informationMINI-SAS HIGH DENSITY
MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity s (TE s) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount
More informationINSTRUCTIONS MODEL AVX-TFR-STUD TEST JIG FOR USE WITH AVTECH AVR-EBF6-B FORWARD RECOVERY TEST SYSTEMS SERIAL NUMBER:
AVTECH ELECTROSYSTEMS N A N O S E C O N D P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 W A V E F O R M E L E C T R O NI C S S I N C E 1 9 7 5 TEL: 888-670-8729 (USA & Canada) or +1-613-686-6675 (Intl)
More informationDetailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Banana Peel Composite - (2) Cat 5e 4-pair 24 AWG unshielded plus (2) Series 6 Coax with Duobond IV Quad shield, polyolefin insulation on the
More information3M Dynatel Triple Play Customer Service Test Set INS970
3M Dynatel Triple Play Customer Service Test Set Advanced Diagnostics Software Options DELT, SELT and Spectral Analysis The Test Set has the ability to run advanced diagnostics in different scenarios to
More information3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide Installing a cabinet with stakes Instructions July 2016 78-0015-3106-6 2 July 2016 78-0015-3106-6
More informationCOMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
More information3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3 Instructions October 2013 3 1.0 Table of contents 1.0 Summary...3 2.0 Cable and Fiber Preparation...4
More informationMaterials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 178-025-613R571 0.03540 Environment
More informationHEAVY DUTY COPPER CABLE LUGS
Industrial products we wholesale, you distribute (SEAMLESS TUBULAR) (TIN PLATED) (SEAMLESS TUBULAR) (NON-PLATED) UL LISTED 4909 Rondo Drive, Fort Worth, Texas 76106, USA Telephone: 1-877-732-0342 Fax:
More informationFeatures. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationDetailed Specifications & Technical Data
Description: Series 11, 14 AWG solid.064" bare copper-covered steel conductor, gas-injected foam polyethylene insulation, Duobond IV quad shield (60% and 40% coverage), PVC jacket Physical Characteristics
More informationINSTRUCTIONS MODEL AVX-S1-P0D-MS1A PLUG-IN SOCKET OUTPUT MODULE SERIAL NUMBER:
A V T E C H E L E C T R O S Y S T E M S L T D. N A N O S E C O N D W A V E F O R M E L E C T R O N I C S S I N C E 1 9 7 5 P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 TEL: 888-670-8729 (USA & Canada)
More informationExecutive Summary. Industry urges the Technical Adaptation Committee (TAC), as a matter of utmost priority, to:
AeA Europe-EICTA-ESIA-JBCE-CECED-Orgalime Guidance on the implementation of Directive 2002/95/EC on the Restrictions on the Use of Certain Hazardous Substances in electrical and electronic equipment (RoHS)
More informationDetailed Specifications & Technical Data
Description: 24 AWG stranded (7x32) TC conductor, Datalene insulation, pairs individually shielded with bonded Beldfoil with a drain wire and have numbered and color-coded PVC jackets, overall Beldfoil
More information3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet Instructions July 2011 3 Contents 1.0 General... 3 2.0 Cabinet Overall Description... 3 3.0 Tools Required... 4 4.0 Kit Contents...
More informationCOMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationMaterials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 179-015-413R491 0.02620 Environment
More informationFour Cat 5e 24 AW G Bonded-Pairs solid bare copper conductors, polyolefin insulation, PVC jacket.
Part Number: 7923A Cat 5e MSHA DataTuff, (4 pr) 24 AW G Solid BC, PO/PVC, EtherNet/IP, CMR, CMX-Outdoor Product Description Four Cat 5e 24 AW G Bonded-Pairs solid bare copper conductors, polyolefin insulation,
More informationScotchlok UR2 Connector
Scotchlok UR2 Connector Technical Report July 2001 80-6104-1674-7-B Contents: 1.0 Background...1 2.0 Description...1 3.0 Test Program Overview...2 4.0 Connection Stability...2 4.01 Stress Relaxation...3
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
MDP 01,, 05 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING / ELEMENT (1) RANGE NO. OF P 70 C PINS Ω W MDP 14 MDP 16 01 05 01 05 0.2 0.2 Consult factory Consult factory Notes (1) For resistor power ratings
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationTECHNICAL SPECIFICATIONS PP1 Series
TECHNICAL SPECIFICATIONS Series Specifications Series Revision B Page: 1 / 10 1.0 SCOPE This specification describes the operating parameters, testing requirements, approvals, materials, and part numbering
More informationACT-IR220L/LE IrDA Serial Port Adapter
ACT-IR220L/LE IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
More information2SC0106T2A0-12 Preliminary Data Sheet
Dual-channel ultra-compact cost-effective SCALE -2+ driver core Short Description The cost-effective SCALE -2+ dual-driver core combines unrivalled compactness with broad applicability. The driver is designed
More informationH155A02. Product Description. Product Specifications. Technical Specifications. Application. Bend Radius. CCB-Sub-Crush Resistance.
H155A02 Part Number: H155A02 COAX RF H155 FRNC Product Description COAX RF H155 FRNC Product Specifications Application Application 1: Application 2: 50 Ohm low loss coaxial transmission cable designed
More informationThree Phase Bridge (Power Modules), 25 A to 35 A
Three Phase Bridge (Power Modules), 25 A to 35 A D-63 PRODUCT SUMMARY I O 25 A to 35 A V RRM V to 6 V Package D-63 Circuit Three phase bridge FEATURES Universal, 3 way terminals: push-on, wrap around or
More information"High Side Chopper" IGBT SOT-227 (Trench IGBT), 100 A
"High Side Chopper" IGBT SOT-227 (Trench IGBT), A FEATURES Trench IGBT technology VS-GTNA2UX SOT-227 PRODUCT SUMMARY V CES 2 V I C DC A at 7 C V CE(on) typical at A, 25 C 2.36 V Package SOT-227 Circuit
More informationFar End Device II Model 1342
3 Far End Device II Model 1342 Operating Instructions Optimized for ADSL2+ May 2007 78-8130-0876-6-C Table of Contents Introduction...3 Power-up...4 Connecting the 3M Far End Device II...5 Installing,
More information1 Form A Solid-State Relay
1 Form A Solid-State Relay i17966_6 DESCRIPTION The is an optically isolated 1 form A solid-state relay in a surface mount 4 pin SOP package. APPLICATIONS Security systems Instrumentation Industrial controls
More informationDF-LDL2-41X16. CCS Inc Copyright(c) 2009 CCS Inc. All rights reserved. Reproduction or photocopy without permission is prohibited.
DF-LDL-41X1 Third Angle Projection Units: mm 4 8.4 (3.). Copyright(c) 09 CCS Inc. All rights reserved. Reproduction or photocopy without permission is prohibited. CCS Inc. Common Specifications LED color
More information3M Dynatel Far End Device III
3M Dynatel Far End Device III User s Guide PAIR 1 GND CO PAIR 2 F1 F2 STATUS Dynatel Far End Device III 1 1/2 0 Future-Proof Testing Platform February 2009 78-8140-2657-7-A 3 2 3M Dynatel Far End Device
More informationSureGrip TM. XWWarning
80PK-22 SureGrip TM Immersion Temperature Probe Instruction Sheet XWWarning To avoid electrical shock, do not use this probe when voltages exceeding 24 V ac rms or 60 V dc are present. The probe tip is
More informationACT-IR220Li/220LN IrDA Serial Port Adapter
ACT-IR220Li/220LN IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
More informationAmphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
More informationTable 1: Pb-free solder alloys of the SnAgCu family
Reflow Soldering 1. Introduction The following application note is intended to describe the best methods for soldering sensors manufactured by Merit Sensor using automated equipment. All profiles should
More information3M Clear Track Hallway Fiber Pathway
Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant
More informationGlass Passivated Power Voltage-Regulating Diodes
Z4KE0A thru Z4KE200A Glass Passivated Power Voltage-Regulating Diodes DO-204AL (DO-4) FEATURES Plastic MELF package Ideal for automated placement Glass passivated chip junction Low Zener impedance Low
More informationContents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
More informationIN COAXIAL PACKAGE FOR 2.5Gb/s APPLICATIONS
FEATURES NEC's φ50 µm InGaAs APD IN COAXIAL PACKAGE FOR 2.5Gb/s APPLICATIONS SMALL DARK CURRENT: ID = 7 na HIGH SENSITIVITY: S = 0.94 A/W at λ = 0 nm, M = S = 0.96 A/W at λ = 550 nm, M = HIGH SPEED RESPONSE:
More informationDistance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type
GP2Y0A41SK0F Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type Description GP2Y0A41SK0F is a distance measuring sensor unit, composed of an integrated combination of PSD
More informationEnhanced isocink+ Bridge Rectifiers
Enhanced isocink+ Bridge Rectifiers + ~ ~ - - ~ ~ + isocink+ Case Style BU + ~ ~ - * Tested to UL standard for safety electrically isolated semiconductor devices. UL 1557 4th edition. Dielectric tested
More informationAnalog High Speed Coupler, High Noise Immunity, 1 MBd, SOP-5 Package
Analog High Speed Coupler, High Noise Immunity, MBd, SOP- Package 29-29-2 DESCRIPTION The VOM2 and VOM, high speed optocouplers, each consists of a GaAlAs infrared emitting diode, optically coupled with
More informationDynatel Cable/Pipe and Fault Locator 2273M Cable/Pipe, Fault and Marker Locator 2273M-iD
Dynatel Cable/Pipe and Fault Locator 2273M Cable/Pipe, Fault and Marker Locator 2273M-iD GPS Interface Allows Real-Time Mapping Innovative technology for locating underground utilities without any doubt
More informationC240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
More informationEnhanced isocink+ Bridge Rectifiers
Enhanced isocink+ Bridge Rectifiers isocink+ - ~ ~ + Case Style BU * Tested to UL standard for safety electrically isolated semiconductor devices. UL 557 th edition. Dielectric tested to maximum case,
More informationThin Film Rectangular Chip Resistors
www.vishay.com,,, Thin Film Rectangular Chip Resistors FEATURES Metal film layer on high quality ceramic Protective top coat Pure tin on nickel barrier layer Low temperature coefficient and tight tolerances
More information2018 Liquid Solder Flux RoHS Product Certificate of Compliance
2018 Liquid Solder Flux RoHS Product Certificate of Compliance All Lead-Free Solder products meet the requirements of the following RoHS standards: EU Directive 2015/863 of 31 March 2015, amending Annex
More information3 Dynatel M Series Locating and Marking System DOCUMENT NEW- TO- THE- WORLD TECHNOLOGY OBSOLETE DAMAGE PREVENTION PIN- POINT ACCURACY SAFETY
3 Dynatel M Series Locating and Marking System NEW- TO- THE- WORLD TECHNOLOGY PIN- POINT ACCURACY SAFETY DAMAGE PREVENTION Introducing the 3M Dynatel M-iD Series Locating and Marking System. NEW TECHNOLOGY
More informationINSTRUCTIONS MODELS AVX-TFR-MELF TEST JIG FOR USE WITH AVTECH AVR-EBF6-B FORWARD RECOVERY TEST SYSTEMS SERIAL NUMBER:
A V T E C H E L E C T R O S Y S T E M S L T D. N A N O S E C O N D W A V E F O R M E L E C T R O N I C S S I N C E 1 9 7 5 P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 TEL: 888-670-8729 (USA & Canada)
More informationPHOTOCOUPLER PS2801A-1,PS2801A-4
PHOTOCOUPLER PS280-1,PS280-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS280-1 and PS280-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN
More informationInsulated Gate Bipolar Transistor (Trench IGBT), 175 A
Insulated Gate Bipolar Transistor (Trench IGBT), 75 A VS-GT75DAU PRODUCT SUMMARY SOT-7 V CES V I C(DC) 75 A at 9 C () V CE(on) typical at A, 5 C.73 V I F(DC) 3 A at 9 C Package SOT-7 Circuit Single Switch
More informationHIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER PHOTOCOUPLER NEPOC Series The is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This
More informationInstall & Go Cat.8 S/FTP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
More informationFEATURES. Package. PARAMETER SYMBOL PB4006 PB4008 PB4010 UNIT Maximum repetitive peak reverse voltage V RRM V 40 T A = 25 C (2) 4.
Enhanced isocink+ TM Bridge Rectifiers + isocink+ ~ ~ - - ~ ~ + ~ ~ Case Style PB FEATURES UL recognition file number E32394 (QQQX2) UL 557 (see *) Enhanced high-current density single in-line package
More informationWIRE & CABLE FILS ET CÂBLES ALAMBRES Y CABLES. 63 Technical information. 64 Primary Wire. 66 Brake Cable & Portable Extension Cable
05 63 Technical information 64 Primary Wire 66 Brake Cable & Portable Extension Cable 67 SXL & Bonded Wire WIRE & CABLE FILS ET CÂBLES 68 Trailer Cable 70 Battery Cable 71 Welding Cable 72 Booster Cable
More informationCOMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
More informationObsolete Document. Dynatel
3 Dynatel 2273ME Cable/Pipe and Fault Locators 2273ME-iD Cable/Pipe/Fault and Marker Locators with id Read/Write 2250ME Cable/Pipe Locators 2250ME-iD Cable/Pipe and Marker Locators with id Read/Write New-to-the-world
More informationSignalSure 250. High power SMD solution AUTOMOTIVE. SignalSure 250 is a compact, surface-mount, high power LED signaling
AUTOMOTIVE SignalSure 250 High power SMD solution SignalSure 250 is a compact, surface-mount, high power LED signaling solution that delivers an elevated standard of light output, flux density, and color
More informationDOCUMENT OBSOLETE. Dynatel. 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write
3 Dynatel 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write New-to-the-world technology for locating underground utilities without any doubt. The 3M Dynatel
More informationSpecifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators
Specifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators PHYSICAL SPECIFICATIONS SIZE WEIGHT (H X W X D) IN. (CM) (INCLUDING BATTERIES) Transmitter 6.75 x 11.25 x 7.75 (17.2 x 28.6 x 19.7)
More informationis used in a manner not described in the user documentation.
SPECIFICATIONS SHDB6M-BW-LL Low Leakage Cable for SMU These specifications apply to the m and m SHDB6M-BW-LL. The SHDB6M-BW-LL is a 6 D-sub male to bare wire male low-leakage cable intended for use with
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 177 2012 Specification for Braided 75 Ω, Mini-Series Quad Shield Coaxial Cable for CMTS and SDI cables NOTICE
More informationCLB-501B CAMERA LINK BREAKOUT BOX. User s Manual. Document # , Rev 0.2, 3/23/2012 preliminary
CLB-501B CAMERA LINK BREAKOUT BOX User s Manual Document # 201107, Rev 0.2, 3/23/2012 preliminary Vivid Engineering 159 Memorial Drive, Suite F Shrewsbury, MA 01545 Phone 508.842.0165 Fax 508.842.8930
More informationSiGe:C LOW NOISE AMPLIFIER FOR GPS
DESCRIPTION The µpc8tn is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise amplifier for GPS. This device exhibits low noise figure and high power gain characteristics,
More information