Small Signal Zener Diodes
|
|
- Brenda Wright
- 6 years ago
- Views:
Transcription
1 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 2.4 to 75 V Test current I ZT.7 to 2 ma V Z specification Thermal equilibrium Int. construction Single FEATURES Silicon planar power Zener diodes Standard Zener voltage tolerance is ± 5 % with a B suffix in the ordering code (e.g.: N522B), suffix C is ± 2 % tolerance These diodes are also available in MiniMELF case with the type designation TZM522 to TZM5267, SOT-23 case with the type designations MMBZ5225 to MMBZ5267 and SOD-23 case with the types designations MMSZ5225 to MMSZ5267 AEC-Q qualified Material categorization: for definitions of compliance please see APPLICATIONS Voltage stabilization ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY N522B to N5267B N522C to N5267C N522B to N5267B N522C to N5267C N522B to N5267B-series-TR N522C to N5267C-series-TR N522B to N5267B-series-TAP N522C to N5267C-series-TAP per 3" reel per ammopack (52 mm tape) 3 /box PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING DO mg UL 94 V- MOISTURE SENSITIVITY LEVEL MSL level (according J-STD-2) SOLDERING CONDITIONS 26 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation T L 25 C P tot 5 mw Zener current I Z P tot /V Z ma Thermal resistance junction to ambient air I = 4 mm, T L = constant R thja 3 K/W Junction temperature T j 75 C Storage temperature range T stg -65 to +75 C Forward voltage (max.) I F = 2 ma V F. V Rev. 2., 8-Sep-4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) ZENER VOLTAGE RANGE () TEST CURRENT REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE f = khz Note () Based on DC measurement at thermal equilibrium; lead length = 9.5 (3/8"); thermal resistance of heat sink = 3 K/W TEMPERATURE COEFFICIENT PART NUMBER V Z at I ZT I ZT I ZT2 I R at V R Z Z at I () ZT Z ZK at I ZT2 VZ V ma μa V %/K NOM. MAX. MAX. MAX. TYP. N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N N Rev. 2., 8-Sep-4 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 BASIC CHARACTERISTICS (T amb = 25 C, unless otherwise specified) R thja - Therm. Resist. Junction Ambient (K/W) l l 2 T L = constant 5 5 I - Lead Length (mm) P tot - Total Power Dissipation (mw) T amb - Ambient Temperature ( C) Fig. - Thermal Resistance vs. Lead Length Fig. 4 - Total Power Dissipation vs. Ambient Temperature 5 V Z - Voltage Change (mv) I Z = 5 ma TK VZ - Temperature Coefficient of V Z ( -4 /K) 5 I Z = 5 ma Fig. 2 - Typical Change of Working Voltage under Operating Conditions at T amb = 25 C Fig. 5 - Temperature Coefficient of V Z vs. Z-Voltage.3 2 V Ztn - Relative Voltage Change V Ztn = V Zt /V Z (25 C).2 TK VZ = x -4 /K 8 x -4 /K 6 x -4 /K. 4 x -4 /K 2 x -4 /K. - 2 x -4 /K - 4 x.9-4 /K T j - Junction Temperature ( C) C D - Diode Capacitance (pf) V R = 2 V T j = 25 C Fig. 3 - Typical Change of Working Voltage vs. Junction Temperature Fig. 6 - Diode Capacitance vs. Z-Voltage Rev. 2., 8-Sep-4 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 5 I F - Forward Current (ma).. T j = 25 C I Z - Z-Current (ma) P tot = 5 mw T amb = 25 C V F - Forward Voltage (V) Fig. 7 - Forward Current vs. Forward Voltage Fig. 9 - Z-Current vs. Z-Voltage I Z - Z-Current (ma) P tot = 5 mw T amb = 25 C r Z - Differential Z-Resistance (Ω) I Z = ma 5 ma ma T j = 25 C Fig. 8 - Z-Current vs. Z-Voltage Fig. - Differential Z-Resistance vs. Z-Voltage Z thp - Thermal Resistance for Pulse Cond. (K/W) t p /T =.5 t p /T =.2 Single Pulse R thja = 3 K/W T = T j max. - T amb t p /T =. t p /T =. t p /T =.2 t p /T =.5 i ZM = (- V Z + (V 2 Z + 4r zj x T/Z thp ) /2 )/(2r zj ) - 2 t p - Pulse Length (ms) Fig. - Thermal Response Rev. 2., 8-Sep-4 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 PACKAGE DIMENSIONS in millimeters (inches): DO-35_N52xx Cathode Identification Ø.55 max. [.22] Ø.4 min. [.5] 26 min. [.24] 3.9 max. [.54] 26 min. [.24] 3. min. [.2].7 [.67].5 [.59] Rev. - Date: 9. December 2 Document no.: S8-V (4) Rev. 2., 8-Sep-4 5 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 27 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9
Small Signal Zener Diodes
Small Signal Zener Diodes FEATURES Zener voltage specified at 5 μa Maximum delta V Z given from μa to μa Very high stability Low noise AEC-Q qualified Material categorization: For definitions of compliance
More informationSmall Signal Zener Diodes
BZX8-Series PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T ; specification Pulse current Int. construction Single Small Signal Zener Diodes FEATURES Silicon planar Zener diodes
More informationZener Diodes FEATURES
ZMYV9 to ZMY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom..9 to V FEATURES Silicon planar power Zener diodes For use in stablilizing and clipping circuits with high power rating
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification SMA (DO-4AC) PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. to 7 V Test current I ZT to 5 ma V BR 9.4 to 5 V V WM 8. to V P PPM 3 W T J max. 5
More informationZener Diodes FEATURES
ZPYV9 to ZPY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT FEATURES Silicon planar power Zener diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages
More informationParameter Test condition Symbol Value Unit Power dissipation T L 25 C P tot 500 mw Z-current I Z P tot /V Z ma
Small Signal Zener Diodes Features Silicon Planar Power Zener Diodes Standard Zener voltage tolerance is ± 5 % e2 These diodes are also available in Mini- MELF case with the type designation TZM522...
More informationZener Diodes FEATURES
ZPYV9 to ZPY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT FEATURES Silicon planar power Zener diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages
More informationZener Diodes with Surge Current Specification
Zener Diodes with Surge Current Specification 17249 PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.6 to 200 V Test current I ZT 5 to 0 ma V BR 7 to 188 V V WM 6.2 to 160 V P PPM 150 W T
More informationSurface Mount Power Voltage-Regulating Diodes
Surface Mount Power Voltage-Regulating Diodes DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Low Zener impedance Low regulation factor Meets MSL level, per J-STD-2, if maximum
More informationSmall Signal Switching Diode
Small Signal Switching Diode 2 DESIGN SUPPORT TOOLS click logo to get started 3 FEATURES Silicon epitaxial planar diode Fast switching diode in case SOT-23, especially suited for automatic insertion AEC-Q
More informationSmall Signal Fast Switching Diode
DESIGN SUPPORT TOOLS click logo to get started Small Signal Fast Switching Diode FEATURES Silicon epitaxial planar diode Fast switching diode AEC-Q qualified available (part number on request) Base P/N-G3
More informationSmall Signal Switching Diode, Dual
Small Signal Switching Diode, Dual 3 1 2 18108_1 DESIGN SUPPORT TOOLS click logo to get started FEATURES Silicon epitaxial planar diode Fast switching dual diode with common cathode AEC-Q101 qualified
More informationFast Avalanche Sinterglass Diode
Fast Avalanche Sinterglass Diode DESIGN SUPPORT TOOLS 949588 click logo to get started FEATURES Glass passivated Hermetically sealed package Very low switching losses Low reverse current High reverse voltage
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23
VCAN26A2-3S Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD Protection Diode in SOT-23 FEATURES 3 For CAN and FLEX-Bus applications Small SOT-23 package AEC-Q1 qualified available 1 2 22742
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323
VCAN26A2-3G Bidirectional Symmetrical (BiSy) Low Capacitance, Dual-Line ESD-Protection Diode in SOT-323 3 1 2 22742 MARKING (example only) 22743 WW VY ABC ABC = type code (see table below) WW = date code
More informationSmall Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode = Cathode = Anode 6 MARKING (example only) FEATURES These diodes are also available in other case styles including the DO- case with the type designation N8, the MiniMELF
More informationUniversal LED in Ø 5 mm Tinted Diffused Package
TLUR54, TLUR54 Universal LED in Ø 5 mm Tinted Diffused Package 9223 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 5 mm Product series: standard Angle of half intensity: ± 3 FEATURES For DC
More informationSmall Signal Fast Switching Diode
N45WS-G Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD-323 Weight: approx. 4 mg Packaging codes/options: 8/K per 3" reel (8 mm tape), K/box 8/3K per 7" reel (8 mm tape), 5K/box FEATURES Silicon
More informationBicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package
Bicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package TLSV5 96496 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 2.5 mm x 5 mm symbol Product series: bicolor Angle of half intensity:
More information1N5221B to 1N5267B. Small Signal Zener Diodes. Vishay Semiconductors
Small Signal Zener Diodes Features Silicon Planar Power Zener Diodes Standard Zener voltage tolerance is ± 5 % e2 These diodes are also available in Mini- MELF case with the type designationtzm522...tzm5267,
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power molded in a clear,
More informationHigh Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 83 nm, GaAlAs Double Hetero 94 8389 DESCRIPTION is an infrared, 83 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed,
More informationGlass Passivated Power Voltage-Regulating Diodes
Z4KE0A thru Z4KE200A Glass Passivated Power Voltage-Regulating Diodes DO-204AL (DO-4) FEATURES Plastic MELF package Ideal for automated placement Glass passivated chip junction Low Zener impedance Low
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8636 is an infrared, 94 nm emitting diode in GaAlAs, MQW technology with high radiant power molded in a blue-gray plastic package.
More information3-Channel EMI-Filter with ESD-Protection
3-Channel EMI-Filter with ESD-Protection 6 5 4 7 2 3 9423 MARKING (example only) 257 XX YY Dot = pin marking YY = type code (see table below) XX = date code 2 FEATURES Ultra compact LLP75-7L package 3-channel
More informationHigh Speed Infrared Emitting Diodes, 940 nm, Surface Emitter Technology
High Speed Infrared Emitting Diodes, 940 nm, Surface Emitter Technology DESCRIPTION As part of the SurfLight TM portfolio, the is an infrared, 940 nm, side looking emitting diode based on GaAlAs surface
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationLow Current LED in Ø 5 mm Tinted Diffused Package
TLLR54., TLLY54., TLLG54. Low Current LED in Ø 5 mm Tinted Diffused Package 9223 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 5 mm Product series: low current Angle of half intensity: ± 25
More informationHigh Intensity LED in Ø 3 mm Tinted Diffused Package
High Intensity LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 19222 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm diffused plastic package.
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with a highly linear photoresponse. It is a low profile surface mount device (SMD) including the chip with a 0.23 mm
More informationSchottky Rectifier Surface-Mount
Schottky Rectifier Surface-Mount esmp Series SMF (DO-29AB) DESIGN SUPPORT TOOLS Models Available MECHANICAL DATA 2309 Case: SMF (DO-29AB) Polarity: color band denotes cathode end Weight: approx. 5 mg Packaging
More informationFast Rectifier Surface Mount
Fast Rectifier Surface Mount 7249 MECHANICAL DATA Case: DO-29AB (SMF) Polarity: band denotes cathode end Weight: approx. 5 mg Packaging codes / options: 8/K per 3" reel (8 mm tape) 08/3K per 7" reel (8
More informationESD Protection Diode in LLP1006-2L
ESD Protection Diode in LLP6-2L 2 1 2856 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 21121 2855 DESIGN SUPPORT TOOLS click logo to get started FEATURES
More informationInfrared Emitting Diode, 950 nm, GaAs
TSUS43 Infrared Emitting Diode, 95 nm, GaAs DESCRIPTION 94 8636-1 TSUS43 is an infrared, 95 nm emitting diode in GaAs technology molded in a blue tinted plastic package. FEATURES Package type: leaded Package
More informationPart Ordering code Type Marking Remarks BAS85 BAS85-GS18 or BAS85-GS08 - Tape and Reel
Small Signal Schottky Diode Features For general purpose applications This diode features low turn-on voltage The devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic
More informationUniversal LED in Ø 3 mm Tinted Diffused Package
Universal LED in Ø 3 mm Tinted Diffused Package 9220 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 3 mm Product series: standard Angle of half intensity: ± 30 FEATURES For DC and pulse operation
More informationHyper Fast Rectifier, 2 x 3 A FRED Pt
Hyper Fast Rectifier, 2 x 3 A FRED Pt 8 7 6 5 FlatPAK 5 x 6 2 3 4 FEATURES Hyper fast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature Low forward voltage drop
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with a highly linear photoresponse. It is a low profile surface mount device (SMD) including the chip with a 7.5 mm
More informationHigh Power Infrared Emitting Diode, 890 nm, GaAlAs / Double Hetero
TSPF62 High Power Infrared Emitting Diode, 89 nm, GaAlAs / Double Hetero 94 8389 DESCRIPTION TSPF62 is an infrared, 89 nm emitting diode in GaAlAs / double hetero (DH) technology with high radiant power,
More informationSilicon PIN Photodiode
BPVNF Silicon PIN Photodiode DESCRIPTION 640- BPVNF is a PIN photodiode with high speed and high radiant sensitivity in black, T-¾ plastic package with daylight blocking filter. Filter bandwidth is matched
More informationHigh Speed Infrared Emitting Diode, 850 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 85 nm, GaAlAs Double Hetero 94 839 DESCRIPTION is an infrared, 85 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded
More informationMMSZ4681-V to MMSZ4717-V
Small Signal Zener Diodes Features Silicon planar Zener diodes Standard Zener voltage tolerance is ± 5 %. e3 High temperature soldering guaranteed: 26 C/4x s set terminals These diodes are also available
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A PRIMARY CHARACTERISTICS I O 1.9 A V RRM 5 V to 1 V Package Circuit configuration Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 94 nm, GaAlAs Double Hetero 21531 DESCRIPTION is an infrared, 94 nm emitting diode in GaAlAs double hetero technology with high radiant power and high speed, molded
More informationHigh Speed Infrared Emitting Diodes, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diodes, 9 nm, GaAlAs, MQW DESCRIPTION is an infrared, 9 nm, side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a low profile surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive area detecting visible
More informationAmbient Light Sensor
TEMD600FX0 Ambient Light Sensor DESCRIPTION 8527- TEMD600FX0 ambient light sensor is a PIN photodiode with high speed and high photo sensitivity in a clear, surface mount plastic package. The detector
More informationHigh Intensity LED in Ø 3 mm Tinted Non-Diffused Package
High Intensity LED in Ø 3 mm Tinted Non-Diffused Package DESCRIPTION 19222 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm clear plastic package.
More informationType Ordering Code Remarks
Silicon Epitaxial Planar Z Diodes BZX85C... Features Sharp edge in reverse characteristics Low reverse current Low noise Very high stability Available with tighter tolerances Applications Voltage stabilization
More informationHyper Fast Rectifier, 2 x 3 A FRED Pt
Hyper Fast Rectifier, 2 x 3 A FRED Pt VS-6DKH2HM3 8 7 6 5 FlatPAK 5 x 6, 2 7, 8 2 3 4 FEATURES Hyper fast recovery time, reduced Q rr, and Available soft recovery 75 C maximum operating junction temperature
More informationDual Color Emitting Diodes, 660 nm and 940 nm
Dual Color Emitting Diodes, 660 nm and 940 nm FEATURES Package type: surface mount Package form: square PCB Dimensions (L x W x H in mm): x x 0.87 Peak wavelength: λ p = 660 nm and 940 nm High reliability
More informationHigh Speed Infrared Emitting Diode, 890 nm, GaAlAs, DH
High Speed Infrared Emitting Diode, 89 nm, GaAlAs, DH DESCRIPTION is an infrared, 89 nm, side looking emitting diode in GaAlAs (DH) technology with high radiant power and high speed, molded in clear, untinted
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a small surface mount device (SMD) including the chip with a 0.85 mm 2 sensitive area and a daylight blocking
More informationHigh Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 83 nm, GaAlAs Double Hetero 26 DESCRIPTION is an infrared, 83 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded
More informationSingle Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
More informationLow Capacitance ESD Protection Diodes for High-Speed Data Interfaces FEATURES
www.vishay.com Low Capacitance ESD Protection Diodes for High-Speed Data Interfaces FEATURES 2 746 MARKING (example only) XX 2052 YYY XX Bar = cathode marking YYY = type code (see table below) XX = date
More informationHigh Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
More informationAmbient Light Sensor
Ambient Light Sensor FEATURES Package type: Surface mount Package form: 0805 Dimensions (L x W x H in mm): 2 x 1.25 x 0.85 Radiant sensitive area (in mm 2 ): 0.27 AEC-Q101 qualified High photo sensitivity
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is matched with IR emitters
More informationSilicon PIN Photodiode
VEMD550C Silicon PIN Photodiode DESCRIPTION VEMD550C is a high speed and high sensitive PIN photodiode. It is a low profile surface-mount device (SMD) including the chip with a 7.5 mm 2 sensitive area
More informationFast Avalanche SMD Rectifier
BYG2K-E3/HE3, BYG2M-E3/HE3 Fast Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).5 A V RRM 8 V, V I FSM 3 A I R. μa V F.6 V t rr 2 ns E R 2 mj T J max. 5 C Package SMA (DO-24AC) Diode
More informationHigh Power Infrared Emitting Diode, 850 nm, Surface Emitter Technology
High Power Infrared Emitting Diode, 850 nm, Surface Emitter Technology DESCRIPTION As part of the SurfLight TM portfolio, the is an infrared, 850 nm emitting diode based on surface emitter technology with
More informationHyper Fast Rectifier, 2 x 4 A FRED Pt
Hyper Fast Rectifier, 2 x 4 A FRED Pt K SMPC (TO-277A) 2 K Cathode Anode Anode 2 FEATURES Hyper fast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature Specified
More informationHigh Efficiency Blue LED in Ø 3 mm Tinted Diffused Package
High Efficiency Blue LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 19222 This device has been redesigned in 1998 replacing SiC by GaN technology to meet the increasing demand for high efficiency blue
More information6-Channel EMI-Filter with ESD-Protection FEATURES VEMI65AC-HCI VEMI65AC-HCI-GS MOLDING COMPOUND FLAMMABILITY RATING
6-Channel EMI-Filter with ESD-Protection 12 11 9 8 7 13 1 2 3 4 5 6 2378 21839 MARKING (example only) YYXX 272 FEATURES Ultra compact LLP2513-13L package Low package profile of.6 mm 6-channel EMI-filter
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 94 839 DESCRIPTION is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded
More informationHigh Speed Infrared Emitting Diode, 890 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 89 nm, GaAlAs Double Hetero 94 8389 DESCRIPTION is an infrared, 89 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed,
More informationHyperfast Rectifier, 6 A FRED Pt
Hyperfast Rectifier, 6 A FRED Pt K SMPC (TO-277A) 2 K Cathode Anode Anode 2 FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature Specified for output
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a silicon PIN photodiode with high radiant sensitivity in clear, T-1 plastic package. It is sensitive to visible and near infrared radiation. FEATURES Package type:
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM
More informationTall Dome Dual Channel Transmissive Optical Sensor with Phototransistor Outputs
TCUT6X Tall Dome Dual Channel Transmissive Optical Sensor with Phototransistor Outputs DESCRIPTION The TCUT6X is a compact transmissive sensor that includes an infrared emitter and two phototransistor
More informationFast Rectifier Surface-Mount
Fast Rectifier Surface-Mount esmp Series SMF (DO-29AB) 2309 2 23020 FEATURES For surface mounted applications Low profile package Ideal for automated placement Glass passivated Meets MSL level, per J-STD-020,
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationHyperfast Rectifier, 3 A FRED Pt
Hyperfast Rectifier, 3 A FRED Pt VS-3EJH0HM3 Top View SlimSMA (DO-22AC) Cathode esmp Series DESIGN SUPPORT TOOLS Models Available Bottom View PRIMARY CHARACTERISTICS Anode click logo to get started I F(AV)
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is matched with IR emitters
More informationHigh Speed Infrared Emitting Diodes, 940 nm, Surface Emitter Technology
High Speed Infrared Emitting Diodes, 940 nm, Surface Emitter Technology 21531 DESCRIPTION As part of the SurfLight TM portfolio, the is an infrared, 940 nm emitting diode based on GaAlAs surface emitter
More informationHigh Power Infrared Emitting Diode, 940 nm, Surface Emitter Technology
High Power Infrared Emitting Diode, 940 nm, Surface Emitter Technology DESCRIPTION As part of the SurfLight TM portfolio, the is an infrared, 940 nm emitting diode based on surface emitter technology with
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationHigh Power Infrared Emitting Diode, 850 nm, Surface Emitter Technology
High Power Infrared Emitting Diode, 850 nm, Surface Emitter Technology DESCRIPTION As part of the SurfLight TM portfolio, the is an infrared, 850 nm emitting diode based on surface emitter technology with
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 4 3 1 2 MARKING (example only) 21483 21482 XY Dot = pin 1 marking X = date code Y = type code (see table below) 20932 FEATURES Ultra compact LLP1010-L package Low package
More informationMMBZ4681-V to MMBZ4717-V
Small Signal Zener Diodes Features Silicon planar Zener diodes. Standard Zener voltage tolerance is ± 5 %. Other tolerances are available upon e3 request. These diodes are also available in DO35 case with
More informationHyperfast Rectifier, 4 A FRED Pt
Hyperfast Rectifier, 4 A FRED Pt K SMPC (TO-277A) 2 K Cathode Anode Anode 2 FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature Specified for output
More informationSilicon PIN Photodiode, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q101 Released
Silicon PIN Photodiode, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q1 Released 20535_1 DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a miniature surface mount
More informationHyper Fast Rectifier, 2 x 2 A FRED Pt
Hyper Fast Rectifier, 2 x 2 A FRED Pt VS-4CSH02HM3 K SMPC (TO-277A) 2 K Cathode Anode Anode 2 FEATURES Hyper fast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature
More informationSilicon PIN Photodiode
Silicon PIN Photodiode 20043- DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a miniature surface mount device (SMD) including the chip with a 0.23 mm 2 sensitive area and a daylight
More informationInfrared Emitting Diode, 950 nm, GaAs
Infrared Emitting Diode, 95 nm, GaAs DESCRIPTION 94 839 TSUS54 is an infrared, 95 nm emitting diode in GaAs technology molded in a blue-gray tinted plastic package. FEATURES Package type: leaded Package
More informationHigh Efficiency LED in Ø 3 mm Clear Package
TLHG49, TLHR49, TLHY49 High Efficiency LED in Ø 3 mm Clear Package DESCRIPTION 9222 The TLH.49 series was developed for applications where high light output is requi. It is housed in a 3 mm clear plastic
More informationInfrared Emitting Diode, 950 nm, GaAs
TSUS52, TSUS521, TSUS522 Infrared Emitting Diode, 95 nm, GaAs DESCRIPTION 94 839 TSUS52 is an infrared, 95 nm emitting diode in GaAs technology molded in a blue-gray tinted plastic package. FEATURES Package
More informationHigh Speed Infrared Emitting Diode, 890 nm, GaAlAs Double Hetero
TSSF45 High Speed Infrared Emitting Diode, 89 nm, GaAlAs Double Hetero 94 8688 DESCRIPTION TSSF45 is an infrared, 89 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and
More informationHyperfast Rectifier, 1 A FRED Pt
Hyperfast Rectifier, A FRED Pt VS-EMH0HM3 FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature Specified for output and snubber operation Low forward
More informationInfrared Emitting Diode, RoHS Compliant, 950 nm, GaAs
DESCRIPTION 94 8638 is an infrared, 95 nm emitting diode in GaAs technology molded in a miniature, clear plastic package without lens. FEATURES Package type: leaded Package form: T-¾ Dimensions (in mm):
More informationSMD Photovoltaic Solar Cell Protection Schottky Rectifier
SSP4S SMD Photovoltaic Solar Cell Protection Schottky Rectifier PRIMARY CHARACTERISTICS I F(AV) A V RRM 40 V I FSM 80 A E AS 0 mj V F at I F = A 0.43 V T J max. 50 C Package Diode variations Single die
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with dome lens and daylight blocking filter. Filter is matched
More informationFast Rectifier Surface Mount
Fast Rectifier Surface Mount esmp Series SMF (DO-219AB) 23019 DESIGN SUPPORT TOOLS Models Available 1 2 click logo to get started 23020 FEATURES For surface mounted applications Low profile package Ideal
More informationFRED Pt Gen 4 Single Ultrafast Diode, 500 A (INT-A-PAK Power Modules)
FRED Pt Gen 4 Single Ultrafast Diode, 5 A (INT-A-PAK Power Modules) VS-VSKEF5/6PbF INT-A-PAK PRODUCT SUMMARY V R 6 V I F(AV) at T C 5 A at 55 C t rr at 4 ns Type Modules - diode, high voltage Package INT-A-PAK
More informationHigh Efficiency LED in Ø 3 mm Tinted Non-Diffused Package
TLHG42., TLHO42., TLHR42., TLHY42. High Efficiency LED in Ø 3 mm Tinted Non-Diffused Package DESCRIPTION 922 The TLH.42.. series was developed for standard applications like general indicating and lighting
More informationHyperfast Rectifier, 2 A FRED Pt
Hyperfast Rectifier, 2 A FRED Pt VS-2EFH02HM3 DO-29AB (SMF) Cathode Anode FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature Specified for output
More informationTrench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection
Trench MOS Barrier Schottky Rectifier for PV Solar Cell Bypass Protection Ultra Low V F = 0.33 V at I F = A TMBS 2 VBT6045CBP PIN PIN 2 HEATSIN PRIMARY CHARACTERISTICS I F(AV) 2 x 30 A V RRM 45 V I FSM
More informationSilicon NPN Phototransistor
TEKT54S Silicon NPN Phototransistor 16733 DESCRIPTION TEKT54S is a silicon NPN phototransistor with high radiant sensitivity, molded in a plastic package with side view lens and daylight blocking filter.
More informationHigh Intensity LED, Ø 5 mm Clear Package
High Intensity LED, Ø 5 mm Clear Package DESCRIPTION 9223 This LED contains the double heterojunction (DH) GaAlAs on GaAs technology. This deep LED can be utilized over a wide range of drive current. It
More information