Technical Data Sheet. Delta 1000/300

Transcription

1 Technical Data Sheet Delta 1000/300 Delta 1000/300 measures important electrical parameters like Current (TRMS), Current, Voltage(TRMS), and Voltage. It also features Capacitance, Ohm & Continuity, frequency, and Duty cycle and temperature. Special eatures Unique Design Delta 1000A/300A is a highly innovative design for features those increases safety and comfort of user. Rotating clamp jaws facilitate the at physically awkward positions, vertical bus bars, conductors placed at positions dif cult to access. Location and design of trigger eliminates fatigues caused by single nger operation. It allows spreading the force required to open the jaws over more than one nger to ensure comfortable operation. Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place his/her hand at safer distance from live conductor. This greatly reduces exposure of human beings to electrical shocks

2 Application Delta 1000/300 measures important electrical parameters like Current (TRMS), Current, Voltage(TRMS), and Voltage. It also features Capacitance, Ohm & Continuity, frequency, and Duty cycle and temperature. Product eatures Large Jaw Opening Narrow Body High Accuracy for low current True Root Mean Square (TRMS) Measurement on Variable requency Drives User selectable Backlit (Optional) Temperature AUTO POWER O or Delta 1000A - Jaw opening of 51mm for standard wire diameter of 50mm and for Delta 300A - Jaw opening of 41mm for standard wire diameter of 40mm for 300A The clamp meter can measure accurately at not only the High currents but also Low current ranges. Clamp meter measures signal s root-mean -square value accurately irrespective of the shape of input waveform. The clamp meter can measure accurately on variable frequency drives (VD) and UPS. It is possible to conduct using the clamp meter during night time in darkness with the help of Backlit. The back lit can be switched ON or O by pressing a single key. Temperatures from -200 to 800 C using Pt 100 and Pt 1000 sensors. In order to save the power of the Batteries, the clamp meter will automatically shut O if it detects no activity for utes. CONTINOUS ON MODE DATA Hold MIN,MAX NULL ZERO Correction for Resistance NULL ZERO Correction for Capacitance AUTO and MANUAL ranging modes Diode Measurement Protection from dust and water Applicable International Safety standards In this mode, AUTO POWER O is disabled. By pressing DATA HOLD button, reading on the display can be latched for Hands free operation. By pressing MIN/MAX button, the clamp meter will start recording latest Minimum and Maximum readings or Low ohm, the lead resistance can be compensated by pressing the shift key (Yellow Key) Null zero connection for capacitance. or n range, stray capacitance can be compensated by shift key (Yellow Key) In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In MANUAL ranging mode range is user selectable using MAN key. or testing diode and transistors, diode function is available. IP20 for terminals as per IEC V CAT IV/1000V CAT III as per International Safety standard IEC Analog Scale Reference conditions for Accuracy Reference temperature Relative Humidity Waveform of measured quantity Input frequency Battery Voltage Weight Weight Warranty Warranty 23 C ± 2K 45%...55% RH Sinusoidal 50 or 60 ±2% 8 V ± 0.1 V 0.6 Kg 1 year Display Number of digits Maximum count Over range indication Polarity indication Environmental Operating temperature Storage temperature Relative humidity Terminal Protection 3 ¾ digits counts. OL is displayed. sign is displayed for functions, if positive pole is at. -10 to +55 C -20 to +70 C % non condensing IP50 for Housing and IP20 for terminals Page 1 of 4

3 Battery Battery Voltage Battery type Battery Life Applicable Standards 9 V Manganese Dioxide Cell as per IEC622, alkaline manganese cell as per IEC 6LR 61 Minimum 220 hours on Vdc, Adc, 80 hours on Vac, Aac. EMC IEC 61326: Class B Immunity IEC KV atmosphere discharge, 4 KV contact discharge IEC : 3 V/m IEC Safety IP for water & dust Pollution degree 2 Installation category High Voltage Test IEC60529 IV 6.7 kv, 50 for 1 minute between housing and input. 3.7 kv, 50 for 1 minute between housing with jaws and input. function V dc V ~ Ω range Resoluti on Input impedance Intrinsic error of digital display ± ( % of rdg + digit) at reference condition mv 10 µv >10 GΩ //<40p ) mv 100 µv >10 GΩ //<40p V 1 mv 11 MΩ // <40p V 10 mv 10 MΩ // <40p V 100 mv 10 MΩ // <40 p V 10 MΩ // <40p V 1 mv 11 MΩ // <40p V 10 mv 10 MΩ // < 40p ( Digit) V 100 mv 10 MΩ // <40p ( > 300 Digit) 1V 10 MΩ // <40p No load voltage Ω 10 mω Max. 3.2 V ) Ω 100 mω Max. 3.2 V KΩ 1Ω Max V KΩ 10 Ω Max V KΩ 100 Ω Max V MΩ 1 KΩ Max V MΩ 10 KΩ Max V Over load value Sine wave Sine wave Over load c apacity 1) Overload duration Continuously V 1 mv Max. 3.2 V Delta 1000A~/ Delta 300A~/Adc Adc 2 to A A 0.1 A 1 A to 30.0A 0.1 A A 1 A % of range + 5 Digits 1100 A Continuously range Resolution Discharge resista nce U 0 max. Intrinsic error of digital display ± ( % of rdg + digit) at reference condition n 10 p 250 KΩ 2.5 V ) n 100 p 250 KΩ 2.5 V µ 1 n 25 KΩ 2.5 V µ 10 n 25 KΩ 2.5 V f min V dc f min V ~ K K K % % 0.1 % 2 - ºC Pt ºC ºC Pt ºC ºC ) 2 1k ± 5 Digit 1 k 10 k; ± 5 Digit / k 0.1 ºC 2 Kelvin + 5 Digit 5) ºC ) 0.1 ºC 2 Kelvin + 2 Digit 5) ºC ) Over load capacity 1) Over load value Sine 3 k 1000 v 30 k; 300 V 100 k 30 V Sine Over load duration Continuously Page 2 of 4

4 1) At 0º ºC 2) With zero adjustment, without zero adjustment + 35 digits 3) Range : 3 V ac/dc: Ue = 1.5 V eff/rms 100 V eff/rms 30 V ac/dc: Ue = 15 V eff/rms 300 V eff/rms 300 V ac/dc: Ue = 150 V eff/rms eff/rms On the range 3 V dc, square wave signal positive on one side 5 15 V, f = const., not or integral multiple. 5) Without sensor Measured Quantity/ Measuring Range 30/300 mv dc V dc dc V ~ ) 30 Ω Temperature 0 ºC 300 Ω ºC 3 KΩ 3 MΩ and 30 MΩ requency of the measured quantity +25 ºC +40ºC > >400 1 K 2) 30 n 3 μ μ % ± 5 digits ºC 0.5 K ºC V ~ 30 A ~/ A 300 A ~/ A A ~/ A 1000 A ~/ A 0 1) Variation ± (.% of rdg. +.digits) >65 1 K ~ <45 > Wave form of the Crest factor C measured quantity 3) Delta 1000A - Delta 300A - A ~ 1.0 % of range + 1 V ~ A ~ ± 1 % of rdg ± 3 % of rdg Battery Voltage V 2 Digit V~ 4 Digit 5) < 7.9 V A/A 8 Digit > 8.1 V 10.0 V 30Ω / 300 Ω/ C 4 Digit 3 kω 30MΩ 3 Digit n, μ 10 Digit 10 Digit % 10 Digit Page 3 of 4

5 Measured Quantity/ Measuring Range 1) Variation ± (.% of rdg. +.digits) 75% V~,V A~, A Relative humidity 3 Days Ω 1 х intrinsic error Meter off % 0 C HOLD - -- ± 1 digits MIN/MAX - V ac/dc, A ~, A ± 2 digits 1) With temperature: Error data apply per 10 K change in temperature. or Aac/Adc error data apply per K change in temperature. With frequency: Error data apply to a display from 300 digits onwards. 2) With zero adjustment. 3) With unknown waveform (crest factor C > 2), measure with manual range selection With the exception of sinusoidal waveform. 5) After the symbol is displayed Ordering Information Product Code DT 20- X X X Type Clamp 1000A / 1 Clamp 300A / 3 Probe Set Normal N ine Tip Backlit With Backlit Without Backlit B Z Sifam Tinsley Instrumentation Inc. 3105, Creekside Village Drive, Suite No. 801, Kennesaw, Georgia (USA) Id : psk@sifamtinsley.com Web : Contact No. : Sifam Tinsley Instrumentation Ltd Unit 1 Warner Drive, Springwood Industrial Estate Braintree, Essex, UK, CM72YW sales@sifamtinsley.com Web: Contact: +44(0) Page 4 of 4