MOTOTRBO System Release Notes. Professional Commercial Radios (PCR) & Accessories. MOTOTRBO Mid-year MOL

Transcription

1 Motorola Solutions MOTOTRBO System Release Notes Professional Commercial Radios (PCR) & Accessories Version: R Date: August 17, 2012 MOTOTRBO Mid-year MOL

2 Contents Overview... 3 Definitions... 3 What s new in the Release... 3 Application Developer Documentation... 3 Product Versions... 3 Known issues in product release... 5 Resolved issues in product release... 6 Error! Reference source not found.10 Motorola Solutions Page 2

3 Overview This section details the known MOTOTRBO product issues, which remain outstanding at the time of this release of software to the field. Known product issues are divided into two categories: Known issues contained within the current release Issues that have been resolved within the current release Definitions A known issue is a problem that is currently unresolved (open). A closed or resolved issue is one that has been repaired and no longer should occur in the product after upgrading to the new product version. The risk and workaround aspects are included in the release note description (Known Issues) for overall assessment of the problem. What s new in the Release 1) RSSI Display Value: Provides access to the MOTOTRBO subscriber's current RSSI value by pressing the left arrow three times and immediately pressing the right arrow three times, all within 5 seconds. 2) MOTOTRBO CSA Battery: Software added to MOTOTRBO CSA portables that will differentiate a battery used for a 1W versus a 2W portable, and display an "Incorrect Battery" alert on the radio screen if the incorrect battery has been attached. Also see - Resolved issues in product release section. Application Developer Documentation 1) MOTOTRBO XCMP/XNL Development Specification: Version Error! Reference source not found.10 Motorola Solutions Page 3

4 Product Versions Listed below are all MOTOTRBO Product types with a reference to the released version of software MOTOTRBO Product Version Supported in Release Subscriber - MOTOTRBO SL Series R Subscriber - MOTOTRBO 2.0 R Subscriber - MOTOTRBO R Trunking Subscriber R XPR 8300, XiR R8200, DR 3000, DGR 6175, R MTR3000 Repeaters CPS R7.6 Air Tracer R6.5 Tuner R8.0 RDAC R4.0 Error! Reference source not found.10 Motorola Solutions Page 4

5 Known issues in product release Issue Number Product / Version User Impact Description Frequency of Occurrence Trigger Special Configurations Recovery Method Recovery Time Workaround CCMPD (MOTOTRBO & MTR3000) In a Linked Capacity Plus system that has a data revert repeater as part of a site, the rest channel will not move around in a "round-robin" fashion - instead trunked calls are always assigned first to channels 1 and 2, if they are available. The other channels are assigned as rest channels only if channels 1 and 2 are busy/not available. 100% (if there is a data revert repeater at the site in a Linked Capacity Plus system) Presence of a Data Revert repeater at a site. Configuring a Data Revert repeater at the site. Issue Number Product / Version User Impact Description Frequency of Occurrence 100% Trigger Special Configurations Recovery Method Recovery Time Workaround CCMPD In TalkAround mode, Remote monitor does not unmute when target radio is disabled. Remote Monitor Request in TalkAround Mode Talk Around Configuration on the Transmit and Receive subscriber Perform Remote Monitor before disabling the Radio. Error! Reference source not found.10 Motorola Solutions Page 5

6 Resolved issues in product release Resolved issues are the known product problems that were reported in products releases, but have now been fixed or closed. Issue Number Product / Version Found Impact Description CCMPD In a Linked Capacity Plus system, Remote Monitor calls may occasionally end prematurely after the call is successful (with the display showing remote monitor ended in the monitoring radio). The monitoring radio will continue to pick up the call as a private call thereafter. CCMPD MOTOTRBO mobiles do not send out audio via rear Tx Audio Pin when initiating an Emergency Hot Mic CCMPD XPR 8300, XiR R8200, DR 3000, DGR 6175, and MTR3000 repeater antenna relay pin gets stuck when in transmit state (analog only) CCMPD The Master repeater in an LCP system will periodically reboot if the "All Talkgroup Wide Area" parameter is disabled CCMPD After upgrading MOTOTRBO subscribers to R , a Private Call/Call Alert locks up the radio. Error! Reference source not found.10 Motorola Solutions Page 6