Power Supplies. 11/2 Introduction. 4AV Non-Stabilized. Power Supplies

Transcription

1 Siemens AG 009 Power Supplies / Introduction AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls General data / - Overview / - Design / - Function / - Technical specifications AV, AV power supplies, filtered, single-phase /6 - Overview /6 - Schematics AV, AV power supplies, filtered, three-phase /7 - Overview /7 - Schematics Unfiltered for Supply of General Loads AV98 power supplies, unfiltered, single-phase /8 - Overview /8 - Design /8 - Schematics AV96 power supplies, unfiltered, three-phase /9 - Overview /9 - Design /9 - Technical specifications /9 - Schematics Project Planning Aids /0 - Dimensional drawings 6EP Stabilized Power Supplies ) SITOP 6EP power supplies ) See Catalog KT 0. "SITOP Power Supplies and LOGO!Power". Siemens LV T 009

2 Power Supplies Siemens AG 009 Introduction Overview AV non-stabilized power supplies AV/ AV0///6 AV AV AV Filtered for supply of electronic controls Ripple <% <% <% <% <% Phase Rated input voltage VAC Rated output voltage acc. to EN 6- suitable for SIMATIC systems V DC Rated output current A , Connection Screw terminals/ Screw terminals/ flat connectors flat connectors Mounting Standard rail Screw terminals/ flat connectors or Cage Clamp terminals Screw and/or standard rail Screw terminals/ flat connectors or Cage Clamp terminals Screw and/or standard rail Screw CUUS approval at 60 C Yes Yes No Partially No Screw terminals/ flat connectors Screw AV98 AV96 Unfiltered for supply of general loads Ripple 8. % <% Phase Rated input voltage VAC 0 or Rated output voltage V DC 0-7- Rated output current/... A rated power W Connection Screw terminals/ flat connectors Screw terminals/ flat connectors Mounting Screw Screw CUUS approval No No 6EP stabilized power supplies ) 6EP ) LOGO!Power Further products for power supplies can be found in Catalog KT 0. or on the Internet at and 6EP ) SITOP smart 6EP ) SITOP modular Phase,,, Rated input voltage V AC DC, AC, 0/0 AC, AC / AC, 0/0 AC, AC Rated output voltage VDC,,,, 8,... 6EP ) SITOP uninterruptible DC Rated output current A ,, 0 Connection Screw terminals Screw terminals Screw terminals Screw terminals Mounting Standard rail Standard rail Standard rail Standard rail Approval u, Cu u, Cu u, Cu u, Cu ) For more information see Catalog KT 0. "SITOP Power Supplies and LOGO!Power". / Siemens LV T 009

3 Siemens AG 009 AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls Protective devices For reliable protection against short-circuits, overload and touch, the cables between the output terminals of the power supply and the load must have a negligible line impedance. For more details see DIN VDE 000 (Erection of low-voltage systems) Part 0, Part 0 (particularly section ) and part 600 (see also IEC 606--, -- and -6). Terminals Screw/flat connectors The AV power supplies are supplied as standard with screw/flat connectors (except: AV8, secondary with flat connectors). Cage Clamp terminals For conductor cross-sections 0.8 mm to mm and currents up to A. The AV0, AV, AV, AV6 and AV single-phase units can be supplied, if required, with screwless Cage Clamp terminals (multi-voltage version is not possible). The grounding terminal is designed as a Cage Clamp terminal. The terminals used are: Finger-safe according to EN 07 Suitable for conductor cross-sections according to VDE 098- and EN General data Mounting Overview Standard version AV, AV, AV and AV power supplies deliver a non-stabilized DC voltage of V DC based on single-phase or threephase safety transformers with downstream rectifiers and ca- the standard version for screw fixing to the plate. The AV power supplies (except: AV/AV) are supplied in pacitor filtering. Standard rail Integrated version Design For onto standard rails (horizontal position), types AV0, AV 0 and AV 06 are The AV, AV, AV and AV power supplies are singlephase or three-phase transformers with downstream rectifiers in equipped as standard with an integrated snap-on for two-pulse (B) or six-pulse (B6) bridge connection with capacitor filtering. They comply with safety class I. AV are only suitable for standard rail. mm standard rails to EN 607. s AV and Optional version The safety transformers used are designed according to s AV, AV, AV 0 and AV 0 are available on EN and support the protective separation of protective extra-low voltage (SELV) and extra-low voltage (FELV) cir- request with a preassembled adapter for fixing on a mm standard rail. cuits from other circuits. The transformers are completely impregnated with polyester resin for protection against harmful Additional capacitors for AV (aluminum electrolyte) environmental influences. s AV0 to AV8 can be supplied with additional capacitors. This is how the values in the "Selection and ordering data" AV devices are are achieved. Designed for fuseless protection with standard motor starter The back-up time is applicable for: U protectors; = U N 0 % Equipped with additional ground connections for a simple Function grounding of the control circuit using a detachable connection directly on the device; The AV power supplies comply with EN 6-, irrespective of Easy to install thanks to freely accessible fixing holes and, in the load (no load up to rated current) and also irrespective of some cases, by snapping onto standard rails. fluctuations of the mains voltage (+6 % to 0 % according to IEC 6008). Connected with varistors and metalized dielectric capacitors for damping high-frequent overvoltages; Despite variations in these parameters, the electronic control is Available for standard IEC voltages 0/00 V, and the multivoltage versions allow connection to the most commonly avail- supplied with the permissible operational voltage without having to select suitable tappings on the transformer to step up or step able mains voltages worldwide up to 600 V. down the DC output voltage according to load and mains conditions. The transformers are dimensioned in their voltage stability s AV and AV are protected by an integrated solidstate fuse. The output is automatically reconnected after the for this application. short cooling time following a mains disconnection or load shedding. For the AV types, short-circuit and overload protection is Any number of units of the same type can be connected in parallel if a higher current level is required. The total current in this provided by an integrated replaceable melting fuse on the secondary case must not overshoot % of the individual rated currents. side. Siemens LV T 009 /

4 Siemens AG 009 AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls General data Technical specifications Single- and three-phase DC power supplies V DC voltage EN 6- Typical value Conditions Limit values AV AV AV AV Ripple % %. %.0...7%. % At rated current V DC voltage Upper limit 0 V 8.8 V 8.8 V 0 V 0 V For mains overvoltage +6 % and no-load operation Lower limit - Arithmetic mean value 0. V 0. V 0. V 0. V 0. V -Lower peak value 9. V 9. V 9. V 9. V 9. V For mains undervoltage 0 % and rated current Rated value. V. V. V. V For rated mains voltage and rated current Current-carrying capacity of the power supplies with RT contactors for DC operation Sizes S00 to S with DC solenoid systems: power at closing = power when closed. The DC power supplies can be loaded up to their rated currents. Contactors Number of RT ) contactors that can be operated simultaneously with preloading $ No-load operation % Rated current ) The number of contactors can be significantly increased by using additional banks of capacitors which must be connected externally. Sizes S6 to S: When operating the rectifiers at 0 % mains undervoltage. AV0/ AV AV AV AV AV6 AV0 AV AV AV AV AV AV6 AV8 $ % $ % $ % $ % $ % $ % $ % $ % $ % $ % $ % $ % $ % RT. RT. 6 RT / Siemens LV T 009

5 Siemens AG 009 AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls General data Primary-side short-circuit protection, secondary-side short-circuit and overload protection Rectifier unit Ambient temperature t a Rated output current motor starter protector ) or fuse, gl/gg operational class Primary-side protection against short-circuits (line protection) by means of I d Rated input voltage U N 7 V (600 V) ) In the event of a short-circuit on the feeder lines between the protective device and the input side of the unit, the rated short-circuit breaking capacity of the protection equipment must be taken into account with regard to the maximum possible prospective short-circuit current at the place of installation. 00 V 60 V (80 V) 00 V ( V) 0 V (0 V) 00 V V (0 V) C DC A Single-phase Secondary-side protection against short-circuit and overload by means of motor starter protector or fuse, operational class AV 60 RV0 -@@@0 0CA 0FA 0JA Built-in electrical Set value in A RV0 -@@@0 0DA 0FA 0KA Set value in A short-circuit/overload protection fuse AV0 RV0 -@@@0 0FA 0HA BA RV0 -@@@0 DA 60. Set value in A Set value in A. 0 Set value in A Set value in A AV RV0 -@@@0 0HA 0JA CA Built-in electrical 60. Set value in A short-circuit/overload protection 0. Set value in A fuse AV RV0 -@@@0 0HA AA DA RV0 -@@@0 GA 60 Set value in A Set value in A 0 6 Set value in A Set value in A 6 AV RV0 -@@@0 CA DA GA RV0 -@@@0 KA 60 0 Set value in A.8. Set value in A 0 0 Set value in A..9 6 Set value in A AV6 RV0 -@@@0 CA EA HA RV0 -@@@0 BA 60 Set value in A. 6 Set value in A 0 8 Set value in A Set value in A 8 AV 0 0. RV0 -@@@0 0BA 0DA Integrated blade-type A Set value in A fuse Fuse gl/gg A 0. FK AV 0 0 RV0 -@@@0 0GA 0HA Integrated blade-type 7. A Set value in A fuse Fuse gl/gg A FK AV RV0 -@@@0 0JA 0KA Integrated blade-type A Set value in A 0.8. fuse Fuse gl/gg A FK AV RV0 -@@@0 BA CA Integrated blade-type A Set value in A.6. fuse Fuse gl/gg A FK Three-phase AV0 RV0 -@@@0 0FA 0FA 0FA 0HA 0KA 0KA RV0 -@@@0 KA 60 9/0 Set value in A Set value in A 9/0 0 / Set value in A Set value in A / AV RV0 -@@@0 0HA 0HA 0HA 0KA BA CA RV0 -@@@0 BA 60./ Set value in A Set value in A / 0 6/8 Set value in A Set value in A 6/8 AV RV0 -@@@0 0HA 0KA 0KA 0KA BA DA RV0 -@@@0 DA 60 8/0 Set value in A Set value in A 8/0 0./ Set value in A Set value in A./ AV RV0 -@@@0 CA CA CA CA EA FA RV0 -@@@0 FA 60 7/0 Set value in A Set value in A 8/0 0./6 Set value in A Set value in A./6 AV RV0 -@@@0 CA CA CA DA GA GA RV0 -@@@0 HA 60 6/0 Set value in A. Set value in A 6/0 0 /8 Set value in A Set value in A /8 AV RV0 -@@@0 DA DA EA FA HA HA RV0 -@@@0 JA 60 /0 Set value in A Set value in A /0 0 /60 Set value in A Set value in A /60 AV6 RV0 -@@@0 HA HA RV0 -@@@0 MA Set value in A 6 6 Set value in A Set value in A 7. 7 Set value in A 96 AV RV0 -@@@0 KA KA VL7 6-DC-0AA0 Set value in A 0 Set value in A 0/ RV0 -@@@0 AA AA VL7 0-DC6-0AA0 Set value in A - Set value in A 80/000 AV 0 RV0 -@@@0 BA RV0 -@@@0 EA Set value in A.6 Set value in A Fuse gl/gg A Fuse gl/gg A AV 0 RV0 -@@@0 CA RV0 -@@@0 FA Set value in A. Set value in A Fuse gl/gg A Fuse gl/gg A Siemens LV T 009 /

6 Siemens AG 009 AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls AV, AV power supplies, filtered, single-phase Overview Rated output voltage U N V DC according to EN 6- ) and SIMATIC at input voltage +6 % to 0 % and load 0 % to 00 % Safety transformer according to EN AV, AV: CUUS at 60 C, ; AV0, AV, AV, AV6: CUUS at 60 C, ; AV: AV: t a = max. 60 C/B, AV: t a =0 C/B Varistor suppressor circuit Status LED EMC according to EN 60: - AV: Suitable for connection to the public supply (residential environments) and industrial networks (industrial environments): - AV: Suitable for connection to industrial networks (industrial environments) Ripple <% AV, AV (left) and AV0, AV to AV (right) ) EN 6-: equipment specification for power supply and interface for programmable controllers. For limit values for V DC see "Technical specifications". Schematics Terminal designations and terminal assignments NSF0_000c NSF0_0006c Rated input voltage U N V Primary connections and links Rated voltage Terminals Links U N V AV 0 and AV 0 0 (0) - (0) 0 (0) (0) , - AV 06 and AV () 00 () - AV 0, AV 0 AV 06, AV 06 NSF0_0007b ) AV () - 0 (0) 00 () ± 8 0 (0) NSF0_0008b AV () - 00 () 0 (0) - 0 (0) (0) (0) , - ) 00 V 0 V - V 0 V + V L+ M M NSF0_0078a M M L+ ) + V 0 V - V 0 V 00 V AV 00 0 ± V + V 00 V 0 V 00 V V 0 V + V 0 V 0 V 0 V V ) For Cage Clamp terminals, the ground connection is routed to the terminal. The order of terminal assignments then changes as follows. NSF0_008 /6 Siemens LV T 009

7 Siemens AG 009 AV Non-Stabilized Power Supplies Filtered for Supply of Electronic Controls AV, AV power supplies, filtered, three-phase Overview Rated output voltage U N V DC according to EN 6- ) and SIMATIC at input voltage +6 % to 0 % and load 0 % to 00 % Safety transformer according to EN AV0 to AV: CUUS at 60 C, ; AV6, AV8, AV: AV: t a = max. 60 C/B, AV: t a =0 C/B Varistor suppressor circuit Status LED EMC according to EN 60: - AV: suitable for connection to the public supply (residential environments) and industrial networks (industrial environments) - AV: suitable for connection to industrial networks (industrial environments) Ripple <% AV0 to AV (left) and AV8 (right) ) EN 6-: equipment specification for power supply and interface for programmable controllers. For limit values for V DC see "Technical specifications". Schematics Terminal designations and terminal assignments W V U NSF0_0009b W W W V V V U U U U U U U V V AV0 to AV W V U NSF0_000a W V U V V WW WW Rated input voltage U N V AV () 0 ±0 00 () * 80 0 ± 0 0 d ) 0 0 AV () 00 () Primary connections and links Rated voltage Terminals Links U N V U-V-W U-V-W U-V-W U-V-W U-V-W U-V-W U-V-W U-V-W U-V-W U-V-W (=factory setting) U-V-W U-W, V-U, W-V U-W, V-U, W-V U-W, V-U, W-V U U V V WW AV, AV and AV. # " = ! 8! 9!!!! AV6: secondary terminals AV8: secondary flat connector W W W W W6 W V V V V V6 V U NSF0_000b U U U U6 U U U U U U6 U " 8 " 8 " 8. % ' = " 8! & 8! & 8 V V V V V6 V WWW W W6W AV. 0 7 (600) - 7 (600) (80) - 00 () - 60 (80) 0 (0) - 00 () 00 0 (0) 00 AV ± U-V-W U-V-W U-V-W U-V-W U-V-W U6-V6-W6 0 V-0 V-0 V 00 V-00 V-00 V 80 V-80 V-80 V U-V, V-W U-V, V-W U-V, V-W U-V, V-W (= factory setting) U-V, V-W, W-U U-V6, V-W6, W-U6 " 8 " 8! & 8 " " " " " "! &! &! & ) Link d is possible, d disconnecting links are not included in the scope of supply. Siemens LV T 009 /7

8 Siemens AG 009 AV Non-Stabilized Power Supplies Unfiltered for Supply of General Loads AV98 power supplies, unfiltered, single-phase Overview The AV98 power supplies comprise single-phase safety transformers according to EN with downstream bridge connection rectifiers without capacitor filtering. Rated output voltage U d V DC Safety transformer according to EN t a =0 C/B Varistor suppressor circuit Short-circuit and overload protection on the output side with top-mounted fuse Ripple 8% Design The AV98 power supplies comply with safety class I. The safety transformers used have been designed according to EN The transformers are completely impregnated with polyester resin for protection against harmful environmental influences. The terminals used are Finger-safe according to EN 07 Suitable for conductor cross-sections according to DIN VDE 000 Part 0 and EN 600- (VDE 0 Part ) AV98 Protective devices For reliable protection against short-circuits, overload and touch, the cables between the output terminals of the power supply and the load must have a negligible line impedance. For more details see DIN VDE 000 (Erection of low-voltage systems) Part 0, Part 0 (particularly section ) and Part 600. The integrated rectifier in a two-pulse bridge connection supplies an unstabilized, unfiltered DC voltage with an arithmetic mean value of V DC and a ripple of 8. %. Short-circuit and overload protection on the output side with top-mounted fuse Varistor protection circuit Schematics N d NSF0_0006a /8 Siemens LV T 009

9 Siemens AG 009 AV Non-Stabilized Power Supplies Unfiltered for Supply of General Loads AV96 power supplies, unfiltered, three-phase Overview The AV96 power supplies comprise three-phase safety transformers according to EN with downstream bridge connection rectifiers without capacitor filtering. Rated output voltage U d 0-7- V DC Safety transformer according to EN Shield winding between input and output winding Varistor suppressor circuit Designed and approved according to VW equipment specification Ripple <% Design The AV96 power supplies comply with safety class I. The safety transformers used have been designed according to EN The transformers are completely impregnated with polyester resin for protection against harmful environmental influences. The terminals used are Finger-safe according to EN 07 Suitable for conductor cross-sections according to DIN VDE 000 Part 0 and EN 600- (VDE 0 Part ) AV96 Protective devices For reliable protection against short-circuits, overload and touch, the cables between the output terminals of the power supply and the load must have a negligible line impedance. For more details see DIN VDE 000 (Erection of low-voltage systems) Part 0, Part 0 (particularly section ) and Part 600. The integrated rectifier in a six-pulse bridge connection supplies an unstabilized, unfiltered DC voltage with an arithmetic mean value of 0/7/ V DC and a ripple of < %. Shield winding between input and output winding Varistor protection circuit In accordance with VW equipment specification Technical specifications Primary-side short-circuit and overload protection Rectifier unit Rated output current I d Primary-side short-circuit and overload protection by motor starter protectors Motor starter protector Set value at 00 V AC DC A A AV96 0-CB00-N RV0-0EA0 0.8 AV96 0-CB00-N RV0-0JA0 0.8 AV96 0-CB00-N RV0 -CA0.8 Schematics N PE +%U-%N 0 7 V- +%V-% +%W-% d NSF0_0007a Siemens LV T 009 /9

10 Siemens AG 009 AV Non-Stabilized Power Supplies Project planning aids Dimensional drawings Filtered for supply of electronic controls AV, AV power supplies, filtered, single-phase AV, AV, for horizontal position, snap-on onto standard rail TH 7. according to EN NSF0_00 B 6 6 Flat connector DIN 6-A 6,-0,8 Screw terminal: Solid 0. mm 6 mm, Finely stranded 0. mm mm AV AV Rated current A DC, B 7 AV0, AV, AV, AV6 for any position, horizontal position for standard rail l 6 h AV...-0A b b n d n l b NSF0_006 AV...-A n b AV0 with integrated standard rail n d n Input Output Flat connector DIN 6-A 6,-0,8 Screw terminal: for AV0 to AV Screw terminal: solid 0. mm mm, solid 0. mm 6 mm, finely stranded finely stranded 0. mm. mm 0. mm mm for AV6 solid or finely stranded Screw terminal: 0. mm 0 mm solid or finely stranded. mm 6 Cage Clamp terminal: Cage Clamp terminal (also for AV0 to AV ground terminal) from the top: solid or finely stranded solid or finely stranded 0.08 mm. mm 0.08 mm mm for AV6 solid or finely stranded 0. mm 6 mm AV0 AV AV AV6 Rated current A DC, 0 Designation according to DIN 0 EI 8/ EI 0/60 EI 0/7 EI 0N/8 b d h I n n , b b d ,8 x 9,8 x 9,8 x 9 7 x M M , /0 Siemens LV T 009

11 Siemens AG 009 AV Non-Stabilized Power Supplies Project planning aids AV, AV power supplies, filtered, single-phase (continued) AV, for suspension, horizontal position for standard rail h n d n l b, b b 6 AV...-0A NSF0_007 AV...-A n b n d n Input Flat connector DIN 6-A 6,-0,8 (does not apply to AV 0) Screw terminal: solid 0. mm 6 mm, finely stranded 0. mm mm Screw terminal: solid or finely stranded. mm Cage Clamp terminal (from the top): solid or finely stranded 0.08 mm mm Output GMKDS terminal (Phoenix): solid 0. mm mm, flexible 0. mm. mm, current carrying capacity 0 A 6 Cage Clamp terminal (from the top): solid or finely stranded 0.08 mm. mm AV 0 and AV 06 with integrated standard rail Rated current A DC Designation according to DIN 0 b b d b d h I n n AV 0 AV 0 AV 06 AV 0, 6 0 EI 78/6 EI 8/ EI 96/8 EI 0/ 9, , M M , 6 86, Standard rail For AV DC power supplies in a special version with a preassembled adapter plate, for horizontal position x x x NSF0_008 AV0, AV 0 und AV 06 power supplies are supplied as standard for both screw and with integrated standard rail, see Dimensional drawings AV and AV. If using standard rail, the position is horizontal. AV AV AV 0 AV 0 x max. b / + b / + b / + b / + x max. b / +8 b / + b / +6 b / + x 9 Standard mount. rail mm x x x 7, x Siemens LV T 009 /

12 Siemens AG 009 AV Non-Stabilized Power Supplies Project planning aids AV, AV power supplies, filtered, three-phase AV0 to AV, arrangement: 60 C ambient temperature on vertical surfaces 0 C ambient temperature on horizontal surfaces l l l h b b NSF0_009 n n d n Input Flat connector DIN 6-A 6,-0,8 Screw terminal: solid or finely stranded 0. mm mm Screw terminal: solid or finely stranded. mm Output Screw terminal: solid or finely stranded 0. mm 0 mm Option: back-up capacitor n d n l n b Rated current Designation b b b according to A DC DIN 0 AV0 AV AV AV UI 7/ UI 7/0 UI /0 UI / d,8 x,8 x 7 x 7 x d h I I I I n n n M6 M AV, AV, arrangement: 60 C ambient temperature on horizontal surfaces 0 C ambient temperature on vertical surfaces l 70 b 98 b 60 n n d n b 66 NSF0_000 n n d n Input Flat connector DIN 6-A 6,-0,8 Screw terminal: solid or finely stranded 0. mm mm Screw terminal: solid or finely stranded. mm Output Screw terminal: solid mm 6 mm, finely stranded. mm 6 mm Option: back-up capacitor AV AV Rated current A DC 0 0 Designation according to DIN 0 UI /8 UI /6 b b b d x 7 x d I n n n M6 M / Siemens LV T 009

13 Siemens AG 009 AV Non-Stabilized Power Supplies Project planning aids AV, AV power supplies, filtered, three-phase (continued) AV6 (80 A) for arrangement on vertical surfaces, cooling fins vertical NSF0_00 8 Input Screw terminal: solid 0. mm 6 mm, finely stranded 0. mm mm (with or without end sleeve) Permissible uninterrupted current when arranged on horizontal surfaces: A at t a = 60 C 80 A at t a = C M8 76 Output Screw terminal: solid mm 6 mm, finely stranded 6 mm mm (with or without end sleeve) AV8 (0 A) for arrangement on vertical surfaces, cooling fins vertical Permissible uninterrupted current when arranged on horizontal surfaces: 00 A at t a = 60 C 0 A at t a = C NSF0_00 98 M8 00 Input Screw terminal: solid 0. mm 6 mm, finely stranded 0. mm mm (with or without end sleeve) Output Flat connectors with through-hole for M8 screw Can be used for TX6 6-B terminal cover Flat connector AV for standing/hanging position h n d n l, b n b b NSF0_00 n n d n Input Flat connector DIN 6-A 6,-0,8 Screw terminal: solid 0. mm 6 mm, finely stranded 0. mm mm Screw terminal: solid or finely stranded, mm Output LUL 0.6 terminal (Weidmüller): solid 0. mm 0 mm, flexible 0. mm 0 mm AV AV Rated current A DC Designation according to DIN 0 UI /0 UI /8 b d h I n n n 96 b b d M6 M Siemens LV T 009 /

14 Siemens AG 009 AV Non-Stabilized Power Supplies Project planning aids Unfiltered for supply of general loads AV98 power supplies, unfiltered, single-phase AV98 00 and AV98 0 for any position d l n n d Flat connector DIN 6-A 6,-0,8 Screw terminal: solid 0. mm 6 mm, finely stranded 0. mm mm D fuse DIN 960 n h b NSF0_00 n AV98 00-CB.., AV98 0-CB.. Rated power W 00 Designation according to DIN 0 EI 0N/8 b 9 d d h I n n Fuses 6,8 M AV98 06 and AV98 07 for any position h b b NSF0_00 h n d Flat connector DIN 6-A Screw terminal: solid 0. mm 6 mm, Finely stranded 0. mm mm G fuse DIN VDE 080 Part D fuse DIN 960 n 6 l n n d AV98 06-CB.. AV CB.. AV98 06-CB.. AV98 07-CB.. AV CB.. AV98 07-CB.. AV CB.. AV98 07-CB.. AV CB.. AV98 07-CB.. Rated power W Designation according to DIN 0 EI 78/6 EI 78/6 EI 8/ EI 8/ EI 96/ EI 96/ EI 96/8 EI 96/8 EI 0/ EI 0/ b d.8 x 9.8 x 9.8 x 9.8 x 9.8 x.8 x.8 x.8 x.8 x.8 x d h M M M M I n n Fuses / Siemens LV T 009

15 Siemens AG 009 AV Non-Stabilized Power Supplies Project planning aids AV96 power supplies, unfiltered, three-phase AV96 0 for any position, horizontal position for standard rail (AV96 0-CB power supply) NSF0_006 b h n d n Flat connector DIN 6-A 6,-0,8 Screw terminal: solid 0, mm 6 mm, finely stranded 0, mm mm AV96 0-CB: Snap-on for standard rail TH x 7, acc. to EN 607, Horizontal position d n b n b Rated power W Designation according to DIN 0 b b d b d h n n AV96 0-CB.. AV96 0-CB.. AV96 0-CB.. UI 60/0 UI 7/0 UI / x 0 6, x 8, x M M6 M Siemens LV T 009 /

16 Siemens AG 009 AV Non-Stabilized Power Supplies Notes 7 /6 Siemens LV T 009