Emergency lighting LED Voltage regulation SOT-89. Description. Order code Marking Package Packaging. 2STF SOT-89 Tape and reel

Transcription

1 Low voltage fast-switching PNP power transistors Applications Datasheet - production data Emergency lighting LED Voltage regulation SOT-89 Relay drive Figure 1. Internal schematic diagram Description The device is PNP transistor manufactured using new PB-HDC (power bipolar high density current) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. Features Very low collector-emitter saturation voltage High current gain characteristic Fast-switching speed Table 1. Device summary Order code Marking Package Packaging 2STF SOT-89 Tape and reel December 2014 DocID13309 Rev 6 1/11 This is information on a product in full production.

2 Contents 2STF2360 Contents 1 Absolute maximum ratings Electrical characteristics Typical characteristics (curves) Test circuits Package mechanical data SOT Revision history /11 DocID13309 Rev 6

3 Absolute maximum ratings 1 Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit V CBO Collector-base voltage (I E = 0) -60 V V CEO Collector-emitter voltage (I B = 0) -60 V V EBO Emitter-base voltage (I C = 0) -6 V I C Collector current -3 A I CM Collector peak current (t P < 5 ms) -5 A I B Base current -0.2 A I BM Base peak current (t P < 5 ms) -0.4 A P TOT Total dissipation at T amb = 25 C 1.4 W Tstg Storage temperature -65 to 150 C TJ Max. operating junction temperature 150 C Table 3. Thermal data Symbol Parameter SOT-89 Unit R (1) thja Thermal resistance junction-ambient Max 89 C/W 1. Device mounted on a PCB area of 1 cm 2 DocID13309 Rev 6 3/11 11

4 Electrical characteristics 2STF Electrical characteristics T CASE = 25 C; unless otherwise specified. Table 4. Electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit I CBO I EBO Collector cut-off current (I E = 0) Emitter cut-off current (I C = 0) V CB = - 60 V -100 na V EB = - 6 V -100 na V BE(on) Base-emitter on voltage V CE = - 2 V I C = ma mv V CE(sat) (1) Collector-emitter saturation voltage I C = - 2 A I C = - 3 A _ I B = ma I B = ma mv mv V BE(sat) (1) Base-emitter saturation voltage I C = - 2 A _ I B = -100 ma V hfe (1) DC current gain I C = ma_ V CE = - 2 V I C = - 1 A _ V CE = - 2 V td Resistive load Delay time I C = - 3 A V CC = - 10 V ns tr ts tf Rise time Storage time Fall time I B(on) = - I B(off) = ma V BE(off) = 5 V ns ns ns f T Transition frequency I C = A V CE = - 10 V 130 MHz 1. Pulse test: pulse duration 300 µs, duty cycle 2 % 4/11 DocID13309 Rev 6

5 Electrical characteristics 2.1 Typical characteristics (curves) Figure 2. DC current gain (V CE = - 2 V) Figure 3. DC current gain (V CE = - 5 V) Figure 4. Collector emitter saturation voltage Figure 5. Base emitter saturation voltage Figure 6. Resistive load switching on Figure 7. Resistive load switching off DocID13309 Rev 6 5/11 11

6 Electrical characteristics 2STF2360 Figure 8. Capacitances 2.2 Test circuits Figure 9. Resistive load switching 1. Fast electronic switch 2. Non-inductive resistor 6/11 DocID13309 Rev 6

7 Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. 3.1 SOT-89 Figure 10. SOT-89 package outline DocID13309 Rev 6 7/11 11

8 Package mechanical data 2STF2360 Table 5. SOT-89 mechanical data Dim. mm Min. Typ. Max. A B B C C D D D E e e H H K 1 8 L R 0.25 b 90 8/11 DocID13309 Rev 6

9 Package mechanical data Figure 11. SOT-89 recommended footprint DocID13309 Rev 6 9/11 11

10 Revision history 2STF Revision history Table 6. Document revision history Date Revision Changes 13-Sep Initial release 02-Mar New graphics have been added 23-Jan Updated mechanical data 09-Oct Added 2STD2360T4 in TO-252 (DPAK) package 14-Oct Modified Table 1 on page Dec Removed SOT-223 and TO-250 (DPAK) packages. Update description in cover page, Table 1: Device summary, Section 1: Absolute maximum ratings, Table 4: Electrical characteristics, Section 2.1: Typical characteristics (curves) and Section 3: Package mechanical data. Minor text changes. 10/11 DocID13309 Rev 6

11 IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved DocID13309 Rev 6 11/11 11