MINIMUM SYSTEM REQUIREMENTS
|
|
- Anissa Johns
- 6 years ago
- Views:
Transcription
1 Quick Start Guide Copyright Frontline Test Equipment, Inc. All rights reserved. You may not reproduce, transmit, or store on magnetic media any part of this publication in any way without prior written authorization of Frontline Test Equipment, Inc. FTS, Frontline, Frontline Test System, ComProbe Protocol Analysis System and ComProbe are registered trademarks of Frontline Test Equipment, Inc. FTS4BT is a trademark of Frontline Test Equipment, Inc. The Bluetooth SIG, Inc. owns the Bluetooth word mark and logos, and any use of such marks by Frontline is under license. All other trademarks and registered trademarks are property of their respective owners.
2 CONTENTS Minimum System Requirements... 1 Purpose... 2 Introduction... 3 Software Installation... 4 From CD:... 4 From download:... 4 Hardware Installation... 5 Selecting a Data Capture Method... 5 Filter Range... 7 Hardware Trigger... 8 Protocols Enabled... 8 Automatic Gain Control... 8 Automatic Gain Control Time... 8 Automatic Gain Control Level... 9 Automatic Gain Control Reduction... 9 Starting data capture... 9 CAPTURE TIPS... 9 Technical Support Page i
3 FIGURES Figure 1: Hardware Installation... 5 Figure 2: Data Capture Method... 6 Figure 3: Control Window... 6 Figure 4: Hardware Options... 7 Figure 5: I/O Settings... 7 Figure 6: Antenna Positioning - Good Figure 7: Antenna Positioning - Too Far Apart Figure 8: Antenna Positioning - Not Parallel Figure 9: Antenna Positioning - Behind or Next To Tag Figure 10: Antenna Positioning - Adjust for Internal Device Antenna Page ii
4 MINIMUM SYSTEM REQUIREMENTS PC with Windows XP 32 bit, (Service Pack 2 or higher), Windows 7 (32 or 64 bit). Pentium 2 GHz processor RAM Requirements: 2 GB minimum, 4 GB recommended 100 MB free Hard Disk Space. USB 2.0 High Speed enabled port Page 1
5 PURPOSE This document gives an overview of software installation, hardware setup and data capture using ComProbe NFC Protocol Analyzer. We will explain how to set up devices, install hardware, configure the ComProbe NFC analyzer, and capture data. To understand how to use ComProbe NFC device to analyze the captured data, please refer to the Frontline ComProbe Protocol Analysis System User Manual. Page 2
6 INTRODUCTION The ComProbe NFC hardware, in conjunction with the ComProbe Protocol Analysis System (CPAS) captures and displays NFC data in Frontline's intuitive display, simplifying and accelerating the debugging process. Page 3
7 SOFTWARE INSTALLATION From CD: Insert the CPAS installer disc into your DVD drive. Click on the Install CPAS shortcut and follow the directions. From download: Download the latest CPAS installer from here. Once downloaded, double-click the installer and follow the directions. While installing, three separate driver installation dialogs will appear. This is normal. Page 4
8 HARDWARE INSTALLATION To assemble ComProbe NFC, perform the following steps: 1. Attach the antenna to the SMA connector at the top of the unit. 2. Insert the smaller end of the USB cable into the ComProbe NFC USB port at the end of the enclosure opposite the antenna. 3. Plug larger end of the USB cable into an available USB port of your PC. When completed, your configuration should resemble the following: Figure 1: Hardware Installation SELECTING A DATA CAPTURE METHOD Now that ComProbe NFC is connected, the next step is to run the CPAS software and select the data capture method. Open (double click on) "Frontline ComProbe Protocol Analysis System" from the Start menu or from the Frontline ComProbe Protocol Analysis System [version #] desktop folder. CPAS detects the hardware you have plugged in and automatically present the appropriate shortcuts. If you have just a ComProbe NFC plugged in, you ll see only the Virtual Sniffing and NFC options presented: Page 5
9 Figure 2: Data Capture Method In this guide we are going to select one of the options (the most commonly used), explain how to configure the software, prepare the hardware and capture data. So, let's get started. 1. Select "NFC". 2. Select "Run". CPAS will open with the Control Window (Figure 5). Figure 3: Control Window Page 6
10 Setting Up NFC data capture From the Control Window, select Hardware Settings from the Options menu to confirm that the ComProbe NFC hardware selected (figure 6) Figure 4: Hardware Options Then select I/O Settings from the Options menu where capture parameters are set (figure 7): Figure 5: I/O Settings The default capture settings give the best capture performance in most settings. Filter Range This setting allows adjustment of the frequency range used when capturing NFC signals. The available options are: Automatic 110 khz to 570 khz 200 khz to 900 khz 210 khz to 1400 khz 450 khz to 1500 khz 100 khz to 1500 khz Page 7
11 The default value for this setting is Automatic which automatically adjusts the filter settings according to the protocols selected for capture. In most cases, this value provides the best performance. Selecting a specific frequency range may improve capture performance when attempting to capture a specific protocol in difficult situations. The following guidelines apply when adjusting the filter settings: For systems such as NFC-F which use a 212 khz subcarrier, 110 khz to 570 khz may be used. For systems such as NFC-A and NFC-B which use an 848 khz subcarrier, 450 khz to 1500 khz may be used. Other filter values may be tried to improve performance. Hardware Trigger This setting enables or disables the use of the ComProbe NFC s hardware trigger input. The following values for this setting are: Not Used Rising Edge Falling Edge When enabled, ComProbe NFC will not begin capturing until the selected event occurs on the hardware trigger input. A timestamp value of 0 corresponds to the triggering event. By default, the hardware trigger input is not used and capture is started immediately upon clicking the Start Capture icon. Protocols Enabled ComProbe NFC can capture the following protocols: NFC-A NFC-B NFC-F To enable or disable a particular protocol, check or uncheck its associated checkbox. By default, ComProbe NFC captures all protocols. Automatic Gain Control Automatic Gain Control allows ComProbe NFC to reduce its capture sensitivity if the signal it s receiving is too strong. It is enabled by checking the Enable Automatic Gain Control check box. By default, Automatic Gain Control is enabled. Automatic Gain Control Time When Automatic Gain Control is enabled, this option determines when Automatic Gain Control is applied. By default, Automatic Gain Control is active only at the start of a message and, once the gain has been adjusted, Automatic Gain Control is disabled until a new message is received. If the Continuous option is selected, Automatic Gain Control is active during reception of the entire message. Page 8
12 Automatic Gain Control Level When Automatic Gain Control is enabled, this setting determines how strong the signal must be before automatic gain adjustment is applied. By default, gain reduction is not enabled until the received signal is more than five (5) times an internal reference value. If the 3 Times (3x) option is selected, gain reduction is applied when the received signal is three (3) times the internal reference value. Automatic Gain Control Reduction When Automatic Gain Control is enabled, this setting controls the amount by which the gain is reduced when the received signal exceeds the Automatic Gain Control Level. The available values for this setting are: 0 db 5 db 10 db 15 db The default option is 15 db. STARTING DATA CAPTURE To start capture, click on the Start Capture button on the Control Window toolbar. Further information about data views and analysis are explained in the Frontline ComProbe Protocol Analysis System User Guide. CAPTURE TIPS NFC can be a tricky protocol to capture reliably. NFC operates over a range of a few inches at most and it s often difficult to know where to place the antenna to get the best result. The location of the antenna in NFC devices varies from device to device making it even more difficult to find the proper location. In this section, we present a few tips to help you more reliably capture NFC data. The following image illustrates good antenna positioning. Page 9
13 Figure 6: Antenna Positioning - Good The device, analyzer antenna, and tag are within an inch or two of each other and all are oriented parallel to each other. This ensures all devices are within NFC s read range and that the maximum signal is available to all devices. In the following image, the devices are too far apart for reliable operation. Figure 7: Antenna Positioning - Too Far Apart Page 10
14 In the following image, the analyzer antenna is not parallel to the device and tag. This reduces its ability to reliably capture data. Figure 8: Antenna Positioning - Not Parallel In most cases, placing the antenna between the device and the tag gives the best results. However, for some combinations of device and tag, performance may be improved by placing the antenna directly behind or next to the tag as in the image below. Figure 9: Antenna Positioning - Behind or Next To Tag Page 11
15 Often, a device will only be able to read NFC tags in the area immediately surrounding the device s internal antenna. Often times, you ll need to experiment with the reading device in order to locate its antenna and determine the best location for the antenna and the tag. In the following image, the antenna of the device on the left is in the lower portion of its enclosure but the device is incorrectly positioned so the upper portion of the enclosure is near the analyzer s antenna. This reduces the quality of the capture. Figure 10: Antenna Positioning - Adjust for Internal Device Antenna Page 12
16 TECHNICAL SUPPORT Technical support is available in several ways. The online help system provides answers to many user related questions. Frontline s website has documentation on common problems, as well as software upgrades and utilities to use with our products. Web: click Support tech_support@fte.com If you need to talk to a technical support representative, support is available between 9am and 5pm, U.S. Eastern time, Monday through Friday. Technical support is not available on U.S. national holidays. Phone: +1 (434) Fax: +1 (434) Page 13
MIDLAND PROGRAMING G14
MIDLAND PROGRAMING G14 1. PROGRAMMING CAPABILITY Welcome to the MIDLAND Programming software! It s a programming software specifically designed for G14 and must be used in conjunction with the dedicated
More informationRevision Date: 6/6/2013. Quick Start Guide
Revision Date: 6/6/2013 Quick Start Guide Important Notice Copyright 2013Frontline Test Equipment. All rights reserved. i Important Notice Table of Contents Purpose 1 Minimum Hardware Requirements 1 Internet
More informationQuick Start Guide for the PULSE PROFILING APPLICATION
Quick Start Guide for the PULSE PROFILING APPLICATION MODEL LB480A Revision: Preliminary 02/05/09 1 1. Introduction This document provides information to install and quickly start using your PowerSensor+.
More informationLine 6 GearBox Version 2.0 Release Notes
Line 6 GearBox Version 2.0 Release Notes System Requirements... 1 Supported Line 6 Hardware... 1 Windows System Requirements... 1 Mac System Requirements... 1 What s New in GearBox 2.0... 2 Key new features...
More informationUsing the S5U13781R01C100 Shield Graphics Library with Atmel Studio
Using the S5U13781R01C100 Shield Graphics Library with Atmel Studio Document Number: X94A-B-002-01 Status: Revision 1.0 Issue Date: 2015/07/30 SEIKO EPSON CORPORATION Rev. 1.0 Page 2 NOTICE No part of
More informationiphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book.
iphoto Getting Started Get to know iphoto and learn how to import and organize your photos, and create a photo slideshow and book. 1 Contents Chapter 1 3 Welcome to iphoto 3 What You ll Learn 4 Before
More informationInstruction Manual for the Software of ASSAN V2 Series Receiver
Instruction Manual for the Software of ASSAN V2 Series Receiver I. Setup 1. Double click SETUP to enter the welcome interface and click Next. 2. Enter your name and company name and click Next. 3. Select
More informationQuick Immunity Sequencer
Part No. Z1-003-152, IB006433 Nov. 2006 USERʼS MANUAL PCR-LA Series Application Software SD003-PCR-LA Quick Immunity Sequencer Ver. 1.0 Use of This Manual Please read through and understand this User s
More informationAntenna and Propagation
Antenna and Propagation This courseware product contains scholarly and technical information and is protected by copyright laws and international treaties. No part of this publication may be reproduced
More informationMonaco ColorWorks User Guide
Monaco ColorWorks User Guide Monaco ColorWorks User Guide Printed in the U.S.A. 2003 Monaco Systems, Inc. All rights reserved. This document contains proprietary information of Monaco Systems, Inc. No
More informationSession KeyStudio. Quick Start Guide
Session KeyStudio Quick Start Guide Session KeyStudio Quick Start Guide Introduction. 1 Session KeyStudio Features. 1 KeyStudio Keyboard:. 1 Micro USB Audio Interface (PC only). 1 Session Software (PC
More informationBefore using the Device. Using your Drifta. Connecting to a PC
Quick Guide v1.0 Introduction Welcome to the exciting world of DStv Mobile. With your Drifta DStv Mobile Decoder, you will be able to connect to DVB-H broadcast mobile TV and have access to DStv Mobile
More informationPC Tune PC Tune Test Procedures for 5100 Series Portable Radios
PC Tune PC Tune Test Procedures for 5100 Series Portable Radios Part Number 002-9998-6513014 August 2008 Copyright 2006, 2007, 2008 by EFJohnson Technologies The EFJohnson Technologies logo, PC Configure,
More informationSKF TKTI. Thermal Camera Software. Instructions for use
SKF TKTI Thermal Camera Software Instructions for use Table of contents 1. Introduction...4 1.1 Installing and starting the Software... 5 2. Usage Notes...6 3. Image Properties...7 3.1 Loading images
More informationMBC DG GUI MBC INTERFACE
MBC DG GUI MBC INTERFACE User Manual Version 2.6 Table des matières Interface - Introduction... 3 Interface - Setup... 3 Minimum Computer Requirements... 3 Software installation... 3 Hardware Setup...
More informationTopcon Receiver Utility: GNSS Receiver Firmware Update Process. Oscar R. Cantu
Topcon Receiver Utility: GNSS Receiver Firmware Update Process Oscar R. Cantu TRU: GNSS Receiver Firmware Update Topcon Receiver Utility (TRU), product definition Office Processing and Reporting Software
More informationVirtual Painter 4 Getting Started Guide
Table of Contents What is Virtual Painter?...1 Seeing is Believing...1 About this Guide...4 System Requirements...5 Installing Virtual Painter 4...5 Registering Your Software...7 Getting Help and Technical
More informationPrinter Software Guide
Printer Software Guide (For Canon Compact Photo Printer Solution Disk Version 6) Windows 1 Contents Safety Precautions...3 Read This First...4 About the Manuals...4 Printing Flow Diagram...5 Printing...6
More informationCapture One 4 is designed with an easy workflow in mind, and the simplified new user interface leaves more of the screen area to your images.
Capture One 4.6 release notes Introduction Newly architected Capture One 4 allows photographers to enhance and develop RAW digital files with excellent color and detail reproduction. Providing best possible
More informationAirScope Spectrum Analyzer User s Manual
AirScope Spectrum Analyzer Manual Revision 1.0 October 2017 ESTeem Industrial Wireless Solutions Author: Date: Name: Eric P. Marske Title: Product Manager Approved by: Date: Name: Michael Eller Title:
More informationFM RADIO TRANSMITTER
FM RADIO TRANSMITTER Instruction Manual i702 Please read this manual carefully before operating and save it for future reference. Questions? Please visit http://www.i-luv.com CONTENTS INTRODUCTION General
More informationHere are additional tips that we hope you will find useful in the future.
Bobbin and Needle Type Here are additional tips that we hope you will find useful in the future. Question: What type of bobbins and needles should I use with my SINGER Futura embroidery & sewing machine?
More informationTransceiver. Quick Start Guide. What is in the box What does it do How to build a setup Verification of the setup...
Transceiver Quick Start Guide What is in the box... 3 What does it do... 5 How to build a setup... 6 Verification of the setup... 10 Help and troubleshooting... 11 Technical specifications... 12 Declaration
More informationFocusrite Saffire 6 USB. User Guide
Focusrite Saffire 6 USB User Guide 1 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus
More informationWireless Transceiver - Bell & Tone Scheduling Troubleshooting Guide
Primex XR 72MHz Synchronized Time Solution Wireless Transceiver - Bell & Tone Scheduling Troubleshooting Guide 2018 Primex. All Rights Reserved. The Primex logo is a registered trademark of Primex. All
More informationRAZER RAIJU TOURNAMENT EDITION
RAZER RAIJU TOURNAMENT EDITION MASTER GUIDE The Razer Raiju Tournament Edition is the first Bluetooth and wired controller to have a mobile configuration app, enabling control from remapping multi-function
More informationinphoto ID SLR Automatic ID photography With Canon SLR camera User Guide
inphoto ID SLR Automatic ID photography With Canon SLR camera User Guide 2014 Akond company Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net akondsales@gmail.com http://www.akond.net
More informationP3PC ENZ2. Basic Operation Guide (Mac OS)
P3PC-4842-14ENZ2 Basic Operation Guide (Mac OS) Contents About This Manual... 5 Safety Information...6 Manuals...7 Trademarks...9 Manufacturer...10 Symbols Used in This Manual... 11 Arrow Symbols in This
More informationInstruction Manual ABM HART Gateway Software. Instruction Manual Revision A.1
Instruction Manual ABM HART Gateway Software Instruction Manual Revision A.1 Table of Contents Section 1: Getting Started... 3 1.1 Setup Procedure... 3 1.2 Quick Setup Guide for Ultrasonic Sensors... 11
More informationVeterinary Digital X-Ray System Quick Start Guide
1 Veterinary Digital X-Ray System Quick Start Guide 2 SOPIX² X-Ray Sensors Quick Start Guide ***PERFORM THIS STEP BEFORE PLUGGING IN THE SENSOR*** Step 1 Load the CD: If you have already plugged in the
More informationNexImage Burst USER S MANUAL Model # 95518, # ENGLISH
NexImage Burst USER S MANUAL Model # 95518, # 95519 ENGLISH Congratulations on your purchase of the Celestron NexImage Burst Solar System imaging camera. Your NexImage camera comes with the following:
More informationinphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide
inphoto ID PS Automatic ID photography With Canon PowerShot camera User Guide 2018 Akond company Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net akondsales@gmail.com http://www.akond.net
More informationSoundCheck 11 Quick Start Guide
Software Install Basics Upgrading From an Earlier Version If you are upgrading from an earlier version of SoundCheck 11.1 (or Beta version) you should copy the old installation folder and name it "SoundCheck
More information23070 / Digital Camera Owner s Manual
23070 / 23072 Digital Camera Owner s Manual 2007 Sakar International, Inc. All rights reserved. 2007 Crayola Windows and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks
More informationOracle Real-Time Scheduler
Oracle Real-Time Scheduler Map Editor Installation Guide Release 2.2.0 Service Pack 3 for Windows E60114-02 May 2015 Map Editor Installation Guide for Oracle Real-Time Scheduler Release 2.2.0 Service Pack
More informationGearBox 3.1 Release Notes
GearBox 3.1 Release Notes Mac OSX 10.4.6; Windows XP Updated 3/12/2007 Introduction The GearBox 3.1 Release Notes provide useful information, including known issues using GearBox with various applications
More informationNexImage USER S MANUAL. Model # 93708, # # 95518, # ENGLISH
NexImage USER S MANUAL Model # 93708, # 93711 # 95518, # 95519 ENGLISH Congratulations on your purchase of the Celestron NexImage Solar System imaging camera. Your NexImage camera comes with the following:
More informationSense. 3D scanning application for Intel RealSense 3D Cameras. Capture your world in 3D. User Guide. Original Instructions
Sense 3D scanning application for Intel RealSense 3D Cameras Capture your world in 3D User Guide Original Instructions TABLE OF CONTENTS 1 INTRODUCTION.... 3 COPYRIGHT.... 3 2 SENSE SOFTWARE SETUP....
More informationWelcome to Polaroid PhotoMAX FUN!
Contents Welcome to Polaroid PhotoMAX FUN!...................... 1 The Polaroid PhotoMAX FUN! Digital 320 Creative Kit......... 2 Kit components......................................... 3 Polaroid Digital
More informationUSB.007 Studio Quality USB Stereo Condenser Mic. User Manual
USB.007 Studio Quality USB Stereo Condenser Mic User Manual Congratulations on your purchase of the MXL USB.007 which uses two gold diaphragm capsules in an X/Y pattern for stereo recording. MXL microphones
More informationVERSION 3.5 RELEASE NOTES
VERSION 3.5 RELEASE NOTES Mac OS X 10.4, Windows XP Updated Nov. 19, 2007 TABLE OF CONTENTS System Requirements... 2 Supported Line 6 Hardware...2 Windows System Requirements...2 Mac System Requirements...2
More informationI: License / Registration II: Vista: Repeat Registration Problem Trial Mode... 4
1 P age Rev.1.01 I: License / Registration... 3 II: Vista: Repeat Registration Problem Trial Mode... 4 III: Sensor Capture Error Suni hardware could not be found... 6 64 Bit Operating System Support...
More informationS100 Webcam. User s Manual
S100 Webcam User s Manual Kodak and the Kodak trade dress are trademarks of Eastman Kodak Company used under license. 2009 Sakar International, Inc. All rights reserved. WINDOWS and the WINDOWS logo are
More informationWEB I/O. Wireless On/Off Control USER MANUAL
Wireless On/Off Control Technical Support: Email: support@encomwireless.com Toll Free: 1 800 617 3487 Worldwide: (403) 230 1122 Fax: (403) 276 9575 Web: www.encomwireless.com Warnings and Precautions Warnings
More informationDigital Microscope. User Manual
Digital Microscope User Manual Features The digital microscope provides 10~200X adjustable magnification range. The build-in high-performance white LED can illuminate the object without using any auxiliary
More informationUSB Multifunction Arbitrary Waveform Generator AWG2300. User Guide
USB Multifunction Arbitrary Waveform Generator AWG2300 User Guide Contents Safety information... 3 About this guide... 4 AWG2300 specifications... 5 Chapter 1. Product introduction 1 1. Package contents......
More informationMagic Wand Portable Scanner with Auto-Feed Dock. PDSDK-ST470-VP-BX2 User Manual
Magic Wand Portable Scanner with Auto-Feed Dock PDSDK-ST470-VP-BX2 User Manual Table of Contents 1. KEY FEATURES... 2 2. FUNCTIONAL PARTS... 2 3. EXPLANATION OF THE STATUS ICONS... 4 4. GETTING STARTED...
More informationScanner Utility for Microsoft Windows Version 9.6. User's Guide
P3PC-E892-03EN Scanner Utility for Microsoft Windows Version 9.6 User's Guide For Use with Microsoft Windows 98, Windows Me, Windows 2000 and Windows XP Introduction Thank you for purchasing the "Scanner
More informationUSB-PWM10. User s Manual
USB-PWM10 User s Manual Windows, Windows2000, Windows NT and Windows XP are trademarks of Microsoft. We acknowledge that the trademarks or service names of all other organizations mentioned in this document
More informationID Photo Processor. Batch photo processing. User Guide
ID Photo Processor Batch photo processing User Guide 2015 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65a Phone/fax: +7(812)384-6430 Cell: +7(921)757-8319 e-mail: info@akond.net http://www.akond.net
More informationTEK-TROL HART GATEWAY SOFTWARE. Operating Instruction Manual.
TEK-TROL HART GATEWAY SOFTWARE Operating Instruction Manual www.tek-trol.com Table of Contents 1 Getting Started... 2 1.1 Setup Procedure... 2 1.2 Quick Setup Guide for Radar Sensors... 10 2 Level device
More informationOperating Instructions Pocket Pictor For use with Pocket Pc s
Introduction Operating Instructions Pocket Pictor For use with Pocket Pc s The compact size and low power consumption of Pocket PC s make them ideal for use in the field. Pocket Pictor is designed for
More informationUSB Line Camera 8M. Coptonix GmbH
USB Line Camera 8M Coptonix GmbH Luxemburger Str. 31 D 13353 Berlin Phone: +49 (0)30 61 74 12 48 Fax: +49 (0)30 61 74 12 47 www.coptonix.com support@coptonix.com 2 The USB Line Camera 8M is an easy to
More informationQuick Guide for ArcReader GIS Installation & Use
Town of Hanover Planning Department Quick Guide for ArcReader GIS Installation & Use For more information, contact the Town Planner, Andrew Port (781-826-7641) or port.planning@hanover-ma.gov System Requirements
More informationXLR PRO Radio Frequency (RF) Modem. Getting Started Guide
XLR PRO Radio Frequency (RF) Modem Getting Started Guide XLR PRO Radio Frequency (RF) Modem Getting Started Guide 90002203 Revision Date Description A September 2014 Initial release. B March 2014 Updated
More informationCapture One 4 is designed with an easy workflow in mind, and the simplified new user interface leaves more of the screen area to your images.
Capture One 4.8.2 release notes Introduction Newly architected Capture One 4 allows photographers to enhance and develop RAW digital files with excellent color and detail reproduction. Providing best possible
More informationEnglish. Français. AV Surround Receiver SR7009. Quick Start Guide Guide de démarrage rapide Guía de inicio rápido
English Français ESPAÑOL AV Surround Receiver SR7009 Quick Start Guide Guide de démarrage rapide Guía de inicio rápido Welcome Thank you for choosing a Marantz AV receiver. This guide provides step-bystep
More informationThe DesignaKnit USB E6000 Link 1 & 2
The DesignaKnit USB E6000 Link 1 & 2 for the Passap / Pfaff Electronic 6000 USB E6000 Link 1 USB E6000 Link 2 What these links do The USB E6000 Link 1 enables downloading of stitch patterns from DesignaKnit
More informationTable of Contents. Introduction...2. What s in the Box?...2. Fast Track USB Features...2. System Requirements...2. Windows...2. Macintosh...
Table of Contents Introduction...2 What s in the Box?...2 Fast Track USB Features...2 System Requirements...2 Windows...2 Macintosh...3 Front Panel Controls...3 Rear Panel Controls...4 Software Installation...4
More informationYCE13. Dealer PC Programming Software Reference Manual. Attention!
YCE13 Dealer PC Programming Software Reference Manual Attention! The YCE13 programing software can only be used with HX380/400 firmware version Ver. 2.00 or later. This software is used to program the
More informationUSBPRO User Manual. Contents. Cardioid Condenser USB Microphone
USBPRO User Manual Cardioid Condenser USB Microphone Contents 2 Preliminary setup with Mac OS X 4 Preliminary setup with Windows XP 6 Preliminary setup with Windows Vista 7 Preliminary setup with Windows
More informationIssue No: MG025 Date: 05 June McMurdo SmartFind R5 GMDSS Radio IMO MSC. 1/Circ Update procedure
Installation SERVICE BULLETIN Issue No: MG025 Date: 05 June 2017 McMurdo SmartFind R5 GMDSS Radio IMO MSC. 1/Circ. 1460 Update procedure Product Affected: McMurdo R5 GMDSS VHF Handheld Radio Reason: Compliance
More informationU2C-1SP4T-63H. Typical Applications
Solid state USB / I 2 C RF SP4T Switch 50Ω 2 to 6000 MHz The Big Deal USB and I 2 C power & control High speed ing (250 ns) High power handling (+30 dbm) Very High Isolation (80 db) Small case (3.75 x
More informationSupplement. ScanMaker i280 features, scenarios, and information. Getting to Know Your ScanMaker i280
Supplement ScanMaker i280 features, scenarios, and information Getting to Know Your ScanMaker i280 The ScanMaker i280 is a high resolution scanner for reflective scanning. It features 4800 x 9600 dpi,
More informationMbox Basics Guide. Version 6.4 for LE Systems on Windows XP and Mac OS X. Digidesign
Mbox Basics Guide Version 6.4 for LE Systems on Windows XP and Mac OS X Digidesign 2001 Junipero Serra Boulevard Daly City, CA 94014-3886 USA tel: 650 731 6300 fax: 650 731 6399 Technical Support (USA)
More informationDMMDRV Software User Manual. Version: A10 50 / December 2015 Manual Code: DSFEN A
DMMDRV Software User Manual Version: A10 50 / December 2015 Manual Code: DSFEN A1050 1215 Contents Section 1. General Software Safety Precautions 1.1 DYN2 System Safety 1.2 DYN4 System Safety 1.3 Servo
More informationTIS 8 RECEIVER USER S MANUAL. WAVEGRID.NET P.O. BOX PHILADELPHIA, PA
TIS 8 RECEIVER USER S MANUAL WAVEGRID.NET P.O. BOX 40245 PHILADELPHIA, PA 19106-0245 1-800-818-3463 215-922-6880 www.wavegrid.net Copyright 2014 WaveGrid.net All rights reserved. Printed in the United
More informationII. Color Policies. ChromaBlast-R Setup & Print Guide Printing an Image With The. ChromaBlast-R Ricoh GX7000 System Requirements
ChromaBlast-R Setup & Print Guide Printing an Image With The Ricoh Aficio gx7000 gelsprinter I. Make sure your system has the minimum specified requirements. II. Set Color Policies In CorelDraw versions
More informationPC: A. Place the Microtek CD-ROM into the CD- ROM drive. B. Follow the on-screen instructions to install the driver and software.
Start Here Installing your Microtek ScanMaker s450/s350 Step 1: Unpack Contents Unpack your scanner package and check for major components. 1 1. Scanner with built-in transparency adapter 2. Software CD
More informationPrinter Software Guide
Printer Software Guide (For Canon CP Printer Solution Disk Version 4) Macintosh 1 Contents Safety Precautions...3 Read This First...4 About the Manuals...4 Printing Flow Diagram...5 Printing...7 Starting
More informationSoundCheck 12.0 Quick Start Guide
Software Install Basics Upgrading From an Earlier Version If you are upgrading from an earlier version of SoundCheck 12.0 (or Beta version) you should copy the old installation folder and name it "SoundCheck
More informationpcon.planner PRO Plugin VR-Viewer
pcon.planner PRO Plugin VR-Viewer Manual Dokument Version 1.2 Author DRT Date 04/2018 2018 EasternGraphics GmbH 1/10 pcon.planner PRO Plugin VR-Viewer Manual Content 1 Things to Know... 3 2 Technical Tips...
More informationBANTAM INSTRUMENTS SOFTWARE USER S MANUAL MIL-STD-461E PRE-COMPLIANCE MEASUREMENT SYSTEM MODEL EMC-461. Model EMC-461 Software User s Manual
BANTAM INSTRUMENTS MIL-STD-461E PRE-COMPLIANCE MEASUREMENT SYSTEM MODEL EMC-461 SOFTWARE USER S MANUAL MIL-STD-461E PRE-COMPLIANCE MEASUREMENT SYSTEM MODEL EMC-461 Software User s Manual BANTAM INSTRUMENTS
More informationPower Quality Recorders with Wireless Communications
Power Monitors, Inc. The Quality in Power Quality Power Quality Recorders with Wireless Communications Residential Commercial Industrial Electric Utility EAGLE 220 EAGLE 330 EAGLE 440 EAGLE 120 INTRODUCING
More informationSolinst Remote Radio Link (RRL Gold) User Guide
Solinst Remote Radio Link (RRL Gold) User Guide Version 1.4.0 March 21, 2016 2016 Solinst Canada Ltd. All rights reserved. Printed in Canada. Solinst and Levelogger are registered trademarks of Solinst
More informationRAZER GOLIATHUS CHROMA
RAZER GOLIATHUS CHROMA MASTER GUIDE The Razer Goliathus Chroma soft gaming mouse mat is now Powered by Razer Chroma. Featuring multi-color lighting with inter-device color synchronization, the bestselling
More informationAN4392 Application note
Application note Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 2483.5 MHz band Introduction BlueNRG family devices are very low power Bluetooth low energy (BLE) devices compliant
More informationDragon. manual version 1.7
Dragon manual version 1.7 Contents DRAGON TOP PANEL... 2 DRAGON STARTUP... 2 DRAGON STARTUP SCREEN... 2 DRAGON INFO SCREEN... 3 DRAGON MAIN SCREEN... 3 TURNING ON A TRANSMITTER... 4 CHANGING MAIN SCREEN
More informationM-16DX 16-Channel Digital Mixer
M-16DX 16-Channel Digital Mixer Workshop Using the M-16DX with a DAW 2007 Roland Corporation U.S. All rights reserved. No part of this publication may be reproduced in any form without the written permission
More informationVBRC 5. Radio Communicator. Installer Manual
VBRC 5 Radio Communicator Installer Manual 10 / 10 / 2013 CONTENT 1. INTRODUCTION...3 2. SYSTEM STRUCTURE...3 3. SYSTEM PROGRAMMING WITH PC SOFTWARE...5 4. TROUBLESHOOTING...6 5. FIRMWARE UPGRADE...7 6.
More informationRigExpert TI-7 USB Transceiver Interface User s manual
RigExpert TI-7 USB Transceiver Interface User s manual Please read this manual before attempting to use the RigExpert TI-7 device. - - 2 - Table of contents 1. What is a RigExpert TI-7?... 4 2. Specifications...
More informationQuick Start Guide. Setup and Scanning. Try the Additional Features. English
English Quick Start Guide Be sure to install the software programs before connecting the scanner to the computer! Setup and Scanning Check the Package Contents p.3 Install the Software Windows Macintosh
More informationIX Feb Operation Guide. Sequence Creation and Control Software SD011-PCR-LE. Wavy for PCR-LE. Ver. 5.5x
IX000693 Feb. 015 Operation Guide Sequence Creation and Control Software SD011-PCR-LE Wavy for PCR-LE Ver. 5.5x About This Guide This PDF version of the operation guide is provided so that you can print
More informationCopyright Notice. Trademarks
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording,
More informationHappy Link Software INSTRUCTION MANUAL
Happy Link Software INSTRUCTION MANUAL 101001E-3 HAPPY Contents Regarding this software Normal Operation -------------------------------------------------------------------------------------------------
More informationSPS1M-EVK. SPS1M-EVK Battery Free Wireless Sensor Handheld Evaluation System EVAL BOARD USER S MANUAL
SPS1M-EVK SPS1M-EVK Battery Free Wireless Sensor Handheld Evaluation System EVAL BOARD USER S MANUAL Introduction This guide describes how to use the Handheld Evaluation System to carry out sensor measurements
More informationDMMDRV 2017 Software User Manual. Version: A1324 / December 2017 Manual Code: DSFEN A
DMMDRV 2017 Software User Manual Version: A1324 / December 2017 Manual Code: DSFEN A1324 1217 Contents Section 1. General Software Safety Precautions 1.1 DYN2 System Safety 1.2 DYN4 System Safety 1.3 Servo
More information4.5.1 Mirroring Gain/Offset Registers GPIO CMV Snapshot Control... 14
Thank you for choosing the MityCAM-C8000 from Critical Link. The MityCAM-C8000 MityViewer Quick Start Guide will guide you through the software installation process and the steps to acquire your first
More informationFUJITSU TWAIN 32 Scanner Driver. Scanner Utility for Microsoft Windows Version User's Guide
P3PC- E417-02EN FUJITSU TWAIN 32 Scanner Driver Scanner Utility for Microsoft Windows Version 9.10 User's Guide For Use with Microsoft Windows 98, Windows Me, Windows 2000 and Windows XP Introduction
More informationField Device Manager Express
Honeywell Process Solutions Field Device Manager Express Software Installation User's Guide EP-FDM-02430X R430 June 2012 Release 430 Honeywell Notices and Trademarks Copyright 2010 by Honeywell International
More informationInstruction Manual. Ultrasonic and Radar
Instruction Manual ABM Gateway Software for 3 & 4 wire Ultrasonic and Radar Instruction Manual Revision 5.8 NOTE: Windows 7 and 8 users are asked to use default screen size (100%). To change from Larger
More informationMANUAL. Textron Motors Diagnostic Tool. This manual is valid for the following Textron Motors Diagnostic Tool:
MANUAL Textron Motors Diagnostic Tool This manual is valid for the following Textron Motors Diagnostic Tool: 0507 TD0507_HB Rev F 6..05 en_english Read the manual before performing the task on the engine.
More informationAgilent N7509A Waveform Generation Toolbox Application Program
Agilent N7509A Waveform Generation Toolbox Application Program User s Guide Second edition, April 2005 Agilent Technologies Notices Agilent Technologies, Inc. 2005 No part of this manual may be reproduced
More informationBEI Device Interface User Manual Birger Engineering, Inc.
BEI Device Interface User Manual 2015 Birger Engineering, Inc. Manual Rev 1.0 3/20/15 Birger Engineering, Inc. 38 Chauncy St #1101 Boston, MA 02111 http://www.birger.com 2 1 Table of Contents 1 Table of
More informationS101v2 Webcam with adjustable focus
S101v2 Webcam with adjustable focus User Manual Kodak and the Kodak trade dress are trademarks of Eastman Kodak Company used under license. 2010 Sakar International, Inc. All rights reserved. WINDOWS and
More informationDigiScope II v3 TM Aperture Scope User s Manual
DigiScope II v3 TM Aperture Scope User s Manual Welcome Thank you for choosing DigiScope II v3 TM Aperture scope! The DigiScope II v3 TM Aperture Scope is an exciting new device to Capture and record the
More informationA Step-by-step Guide to Installing and Configuring your Vonets VAP11G Wifi Bridge
A Step-by-step Guide to Installing and Configuring your Vonets VAP11G Wifi Bridge (c) 2011 Zarar Iqbal D0033 21/6/2011 About this guide T he main aim of this guide is to guide you through putting your
More informationHARDWARE SETUP GUIDE. 1 P age
HARDWARE SETUP GUIDE 1 P age INTRODUCTION Welcome to Fundamental Surgery TM the home of innovative Virtual Reality surgical simulations with haptic feedback delivered on low-cost hardware. You will shortly
More informationCHC i80 GNSS Receiver QuickTour with LandStar7. (PDA Network Mode)
CHC i80 GNSS Receiver QuickTour with LandStar7 (PDA Network Mode) 1.Prerequisites Hardware: CHC i80 rover, Controller Kit, SIM card,lithium Battery, pole Software: LandStar7 2.Steps to set i80 working
More informationinphoto ID Canon camera control software Automatic ID photography User Guide
inphoto ID Canon camera control software Automatic ID photography User Guide 2008 Akond company 197342, Russia, St.-Petersburg, Serdobolskaya, 65A Phone/fax: +7(812)600-6918 Cell: +7(921)757-8319 e-mail:
More information