PSBDAF20~200V1 Schottky Barrier diode

Transcription

1 Feature Metal silicon junction,majority carrier conduction For surface mounted applications Low power loss, high efficiency High forward surge current capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Mechanical Characteristics Case: SMAF Terminals : Solderable per MIL-STD-750, Method 26 Approx. Weight: 27mg oz Absolute maximum rating@25 Parameter Symb ol FV F40V F60V F80V F0V FV F50V F0V Units Maximum Repetitive Peak Reverse Voltage V RRM V Maximum RMS voltage V RMS V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Max Instantaneous Forward Voltage at A V DC V I F(AV).0 A I FSM A V F V Rev.06.

2 Absolute maximum Parameter Symbol FV F40V F60V F80V F0V FV F50V F0V Units Maximum DC Reverse Current Ta = 25 C at Rated DC Reverse Voltage Ta =0 C Typical Junction I R ma 5 2 Capacitance ) C j 80 pf Typical Thermal Resistance 2) R θja 5 /W Operating Junction Temperature T j -55~±25 Range Storage Temperature Range T stg -55~+50 Typical Characteristics Average Forward Current (A) Single phase half-wave 60 Hz resistive or inductive load Instaneous Reverse Current ( μa) T J =0 C T J =75 C T J =25 C Ambient Temperature ( C) Percent of Rated Peak Reverse Voltage(%) Fig. Forward Current Derating Curve Fig.2 Typical Reverse Characteristics Rev

3 Instaneous Forward Current (A).0 V ~ 40V 60V ~ 80V Instaneous Forward Voltage (V) Junction Capacitance (pf) V ~ V V ~ 40V 50V ~ 0V 60V ~ 0V 50 Reverse Voltage (V) T J =25 C 0 Fig.3 Typical Forward Characteristic Fig.4 Typical Junction Capacitance Peak Forward Surage Current ( A) ms Single Half Sine Wave (JEDEC Method) V ~ 60V 0V ~ V 0 Number of Cycles at 60Hz Transient Thermal Impedance( C / t, Pulse Duration(sec) Fig.5 Maximum Non-Repetitive Peak Forward Surage Current Fig.6- Typical Transient Thermal Impedance Solder Reflow Recommendation 280 Peak Temp=257, Ramp Rate=0.802deg. /sec Time (sec) Rev

4 Product dimension (SMAF) The recommended mounting pad size.6 (63) 2.8 ().6 (63).8 (7) Unit: mm (mil) Ordering information Device Package Shipping SMAF (Pb-Free) 3000/ Tape & Reel Rev

5 IMPORTANT NOTICE and are registered trademarks of Prisemi Electronics Co., Ltd (Prisemi),Prisemi reserves the right to make changes without further notice to any products herein. Prisemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Prisemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in Prisemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. Prisemi does not convey any license under its patent rights nor the rights of others. The products listed in this document are designed to be used with ordinary electronic equipment or devices, Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Website: For additional information, please contact your local Sales Representative. Copyright 09, Prisemi Electronics is a registered trademark of Prisemi Electronics. All rights are reserved. Rev