05D / RCPxxxxxX High Power Wide Band Load Return Loss Detector
|
|
|
- Gerard Cox
- 5 years ago
- Views:
Transcription
1 PxxxxxX High Power Wide Band Load Return Loss Detector Features Unique coupler structure for wide band high directivity operation. Internal Detector and comparator with variable trip voltage for R/L measurement and high VSWR alarm. larm and ~larm for convenient use. Wide dynamic range owing to log-slope detector R/L (db) indicated d by voltage output. t Independent forward and reverse power monitor in log slope. This material is not to be supplied by other party than co., LTD
2 Electrical Specification P002025, Code Name : D1Y6SD5UNXX Parameter Symbol Typical Units/Remarks P010 P / R 5C / P CP0020 CP0525 Bandwidth 20~250 MHz Maximum handling power Pw 150 Watt Dynamic Range 3~150 Watts Insertion Loss IL < 0.4 db Input VSWR, VSWR 1.5:1 Output VSWR VSWR 1.5:1 Directivity 16 db min 20 db Typ. Nominal Return Loss Detector Slope SRL 0.1 V / db Nominal Forward/Reverse Power Detector slope SDEC 0.05 V/dB Input Voltage Vdc 5 +/- 0.3 V Current Consumption Idc < 90 m larm/~larm output 4.5 ~ 5.2 TTL Detector ccuracy over Frequency ( Frequency 30 W, 50 Ω Load) Detector ccuracy over Temp ( Temp 30 W, 50 Ω Load) 6 db 1.5 db Detector port output impedance 1 kohm RF Connector Type N female Size (w/o Connector Extension) 86 x 90 x 27 mm Operating Case Temperature -20~70 degree C Storage Temperature -40~90 degree C This material is not to be supplied by other party than co., LTD
3 Typical Measured Data of P MP Load Condition This material is not to be supplied by other party than co., LTD
4 Typical Measured Data of P MP Load Condition This material is not to be supplied by other party than co., LTD
5 Typical Measured Data of P MP Load Condition This material is not to be supplied by other party than co., LTD
6 Typical Measured Data of P MP Load Condition This material is not to be supplied by other party than co., LTD
7 Typical Measured Data of P MP Load Condition This material is not to be supplied by other party than co., LTD
8 1 E - - Mechanical Dimensions (86 x 90 x 27 mm 3 ) for P B C D E F CP0020 CP / R 5C / P P010 P DTE REVISION RF Output P RF Input 1. Forward 2. Reverse 3. Return L 4. ~ larm 5. larm 6. GND 7. 5V d Power Monitor e Power Monitor Loss larm Level larm djust MTERIL FINISH Q'ty DESIGNED CHECKED PPROVED FILE PTH 기구 MODEL NO. 설계 JO J-G MODEL NME 회로 PRT NME 설계 DRWGING NO UNIT NGLE mm P COUPLER OUTLINE DRWING 8 PP. SCLE 1 : 1 1 / 1 B C D E F This material is not to be supplied by other party than co., LTD
9 Electrical Specification P0105D, Code Name : D1Y6SD5UNXX Parameter Symbol Typical Units/Remarks P010 P / R 5C / P CP0020 CP0525 Bandwidth 100~500 MHz Maximum handling Power Pw 150 Watt Dynamic Range 3~150 Watts Insertion Loss IL < 0.3 db Input VSWR, VSWR 1.5:1 Output VSWR VSWR 1.5:1 Directivity 16 db min 20 db Typ. Nominal Return Loss Detector Slope SRL 0.1 V / db Nominal Forward/Reverse Power Detector slope SDEC 0.05 V/dB Input Voltage Vdc 5 +/- 0.3 V Current Consumption Idc < 90 m larm/~larm output 4.5 ~ 5.2 TTL Detector ccuracy over Frequency ( Frequency 30 W, 50 Ω Load) Detector ccuracy over Temp ( Temp 30 W, 50 Ω Load) 8 db 1.5 db Detector port output impedance 1 kohm RF Connector Type N female Size (w/o Connector Extension) 86 x 90 x 27 mm Operating Case Temperature -20~70 degree C Storage Temperature -40~90 degree C This material is not to be supplied by other party than co., LTD
10 Typical Measured Data of P0105D MP Load Condition This material is not to be supplied by other party than co., LTD
11 Typical Measured Data of P0105D MP Load Condition This material is not to be supplied by other party than co., LTD
12 Typical Measured Data of P0105D MP Load Condition This material is not to be supplied by other party than co., LTD
13 Typical Measured Data of P0105D MP Load Condition This material is not to be supplied by other party than co., LTD
14 Typical Measured Data of P0105D MP Load Condition This material is not to be supplied by other party than co., LTD
15 1 - - Mechanical Dimensions (86 x 90 x 27 mm 3 ) for P0105D B C D E F CP0020 CP / R 5C / P P010 P DTE REVISION RF Output P0 105D RF Input 1. Forward P 2. Reverse P 3. Return Lo 4. ~ larm 5. larm 6. GND 7. 5V Power Monitor Power Monitor oss larm Level larm djust MTERIL F INISH Q'ty DESIGNED CHECKED PPROVED FILE PTH 기구 MODEL NO. 설계 JO J-G MODEL NME 회로 PRT NME 설계 DRWGING NO UNIT NGLE mm P0105D COUPLER OUTLINE DRWING 8 PP. SCLE 1 : 1 1 / 1 B C D E F This material is not to be supplied by other party than co., LTD
16 Electrical Specification P0525C Parameter Symbol Typical Units/Remarks P010 P / R 5C / P CP0020 CP0525 Bandwidth 500~2500 MHz Maximum handling power Pw 150 Watt Dynamic Range 3~150 Watts Insertion Loss IL < 0.5 db Input VSWR, VSWR 1.5:1 Output VSWR VSWR 1.5:1 Directivity 16 db min 20 db Typ. Nominal Return Loss Detector Slope SRL 0.1 V / db Nominal Forward/Reverse Power Detector slope SDEC 0.05 V/dB Input Voltage Vdc 5 +/- 0.3 V Current Consumption Idc < 90 m larm/~larm output 4.5 ~ 5.2 TTL Detector ccuracy over Frequency ( Frequency 30 W, 50 Ω Load) Detector ccuracy over Temp ( Temp 30 W, 50 Ω Load) 7 db 1.5 db Detector port output impedance 1 Kohm RF Connector Type N female Size (w/o Connector Extension) 86 x 74 x 27 mm Operating Case Temperature -20~70 degree C Storage Temperature -40~90 degree C This material is not to be supplied by other party than co., LTD
17 Typical Measured Data of P0525C MP Load Condition This material is not to be supplied by other party than co., LTD
18 Typical Measured Data of P0525C MP Load Condition This material is not to be supplied by other party than co., LTD
19 Typical Measured Data of P0525C MP Load Condition This material is not to be supplied by other party than co., LTD
20 Typical Measured Data of P0525C MP Load Condition This material is not to be supplied by other party than co., LTD
21 Typical Measured Data of P0525C MP Load Condition This material is not to be supplied by other party than co., LTD
22 Mechanical Dimensions (86 x 74 x 27 mm) for P0525C B C D E F CP0020 CP / R 5C / P P010 P DTE REVISION RF Input RF Output P P0525C 1. For rward Power Monitor 2. Rev verse Power Monitor 3. Ret turn Loss 4. ~ larm 5. la arm 6. GN ND 7. 5V larm Level larm djust MTERIL FINISH Q'ty DESIGNED CHECKED PPROVED FILE PTH 기구 MODEL NO. 설계 JO J-G MODEL NME 회로 PRT NME 설계 DRWGING NO UNIT NGLE mm P0525C COUPLER OUTLINE DRWING 8 PP. SCLE 1 : 1 1 / 1 B C D E F This material is not to be supplied by other party than co., LTD
23 Electrical Specification P0530, Code Name : D1Y6SD5UNXX Parameter Symbol Typical Units/Remarks P010 P / R 5C / P CP0020 CP0525 Bandwidth 500~3000 MHz Maximum handling power Pw 150 Watt Dynamic Range 1~150 Watts Insertion Loss IL < 0.5 db Input VSWR, VSWR 1.5:1 Output VSWR VSWR 1.5:1 Directivity 16 db min 20 db Typ. Nominal Return Loss Detector Slope SRL 0.1 V / db Nominal Forward/Reverse Power Detector slope SDEC 0.05 V/dB Input Voltage Vdc 5 +/- 0.3 V Current Consumption Idc < 90 m larm/~larm output 4.5 ~ 5.2 TTL Detector ccuracy over Frequency ( Frequency 30 W, 50 Ω Load) Detector ccuracy over Temp ( Temp 30 W, 50 Ω Load) 8 db 1.5 db Detector port output impedance 1 Kohm RF Connector Type N female Size (w/o Connector Extension) 86 x 74 x 27 mm Operating Case Temperature -20~70 degree C Storage Temperature -40~90 degree C This material is not to be supplied by other party than co., LTD
24 Typical Measured Data of P0530 MP Load Condition This material is not to be supplied by other party than co., LTD
25 Typical Measured Data of P0530 MP Load Condition This material is not to be supplied by other party than co., LTD
26 Typical Measured Data of P0530 MP Load Condition This material is not to be supplied by other party than co., LTD
27 Typical Measured Data of P0530 MP Load Condition This material is not to be supplied by other party than co., LTD
28 Typical Measured Data of P0530 MP Load Condition This material is not to be supplied by other party than co., LTD
29 1 - - Mechanical Dimensions (86 x 74 x 27 mm) for P0530 B C D E F CP0020 CP / R 5C / P P010 P DTE REVISION RF Input RF Output P Forwa ard Power Monitor 2. Reve erse Power Monitor 3. Retur rn Loss 4. ~ la rm 5. larm 6. GND larm Level 7. 5V larm djust MTERIL FI NISH Q'ty DESIGNED CHECKED PPROVED FILE PTH 기구 MODEL NO. 설계 JO J-G MODEL NME 회로 PRT NME 설계 DRWGING NO UNIT NGLE mm P0530 COUPLER OUTLINE DRWING 8 PP. SCLE 1 : 1 1 / 1 B C D E F This material is not to be supplied by other party than co., LTD
30 P010 P / R 5C / P CP0020 CP0525 Descriptions P0525C measures Return loss of Load connected output port by using directional coupler with high directivity. P0525C indicates measured Return Loss by voltage as bellow V R/L(return loss) = Return Loss(dB) * 0.1 ±0.15V For example, if the return loss of antenna is 10 db, the VR/L is 1.0V. This module also deliver alarm and alarm with adjustable trip level. This adjustment can be done by user turning potentio-meter. RF in Forward Power Monitor Reflected Power Monitor Log Detector Wide Band RF Coupler - x2 Vout ( pin #4) = Retrun Loss of Load in db * 0.1 (V) - + Log Detector RF out Level djust monitor pin ~larm larm larm Trip Point Factory set =0.4 04V(4dB) Simplified Block Diagram This material is not to be supplied by other party than co., LTD
31 Wide band directional coupler samples forward and reverse power at once and independently. Directivity of this coupler affects significantly on performance. Detector voltages for F/R are provided thru Molex pin for the purpose of power monitoring. Difference of Detector voltage is exactly physical quantity of Return Loss. For better comprehension, x 2 value come out thru Molex pin. Note that this device does not have accuracy as power meter or network analyzer. It has limitation on dynamic range, frequency flatness, detector linearity and accuracy. Frequency flatness was improved by utilizing frequency equalizer. It is not depicted in the block diagram for clearance. The accuracy and dynamic range will be supplied after further development. This material is not to be supplied by other party than co., LTD
32 Brief Mechanical Description P010 P / R 5C / P CP0020 CP0525 RF input mplifier side Thread for Pannel Mounting (M3 x 4) Hole for Mounting ( Hole 3.2 mm x 4) INPUT Connector Molex 1. Forward Power 2. Reverse Power 3. Retrun Loss 4. ~larm 5. larm 6. GND 7. 5V Molex 7 pin OUTPUT larm djust larm Level RF Output ntenna side Level djust monitor pin Hole for larm Level djust 1 Molex series Red color pin number is 1. This material is not to be supplied by other party than co., LTD
33 Pin Description Pin Name Pin Description Interface Schematic RF Input N type P010 P / R 5C / P CP0020 CP0525 RF Output Forward Power (Molex Pin1) Reverse Power (Molex Pin2) Return Loss (Molex Pin3) ~larm (Molex Pin4) larm (Molex Pin5) GND (Molex Pin6) 5V (Molex Pin7) larm Level (Pin Feed Thru) larm djust (Hole) N type Forward Power Monitor with 0.05V/ db Reverse Power Monitor with 0.05V/ db Return Loss in 0.1V/dB ~larm : 0V when R/L go over trip setting (Pin*) normal larm : 5V when R/L go over trip setting (Pin*) normal GND 5V djust Trip Level Monitor djust larm Level 5V GND 5.6V Zener VCC This material is not to be supplied by other party than co., LTD
34 Conceptual drawing of V R/L VS. Load Return Loss P010 P / R 5C / P CP0020 CP0525 R/L Voltage Open or Short 3:1 2:1 0.1 V/dB Return Loss of nt (db) VSWR 50 ohm Term This material is not to be supplied by other party than co., LTD
35 Conceptual drawing of Detector Voltage VS. Input specific frequency P010 P / R 5C / P CP0020 CP0525 Detector Voltage 0.05 V/dB Conceptual drawing of Detector Voltage VS. Constant Power Detector Voltage Input Power Frequency Flatness Fstart Fstop This material is not to be supplied by other party than co., LTD
TTRM MHZ 16W BI-DIRECTIONAL AMPLIFIER
TTRM08 700-800MHZ 6W BI-DIRECTIONL MPLIFIER DESCRIPTION This class Gas module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format,
TTRM MHZ 20W BI- DIRECTIONAL AMPLIFIER
TTRM00 800-000MHZ 0W BI- DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation
Preliminary Short Specification for RCA0727H50D1
Preliminary Short Specification for RCA077H0D RESTRICTION ON USE, DUPLICATION, OR DISCLOSURE OF PROPRIETARY INFORMATION This document contains proprietary information, which is the sole property of RFcore
TTRM1004-D MHZ 25W BI-DIRECTIONAL AMPLIFIER
TTRM00-D0 00-500MHZ 5W BI-DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
FEU (Front End Unit) for Optic Repeater
FEU (Front End Unit) for Optic Repeater 1. Specification 1.1. All Items Parameter Specification Comments RX1 RX2 TX Frequency Range. 1750.625 ~ 1769.375MHz 1750.625 ~ 1769.375MHz 1840.625 ~ 1859.375MHz
HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR
OSCILLATOR SECTION HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR BCO SERIES: 0.20 4 GHz (Fundamental) 4 16 GHz (Multiplied) FEATURES Low cost Phase locked to external standard or internal crystal
Model DC4859J5005AHF. Ultra Low Profile db Directional Coupler
Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion
HMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
Model BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
HMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
TTRM MHZ 100W BI-DIRECTIONAL AMPLIFIER
TTRM096 00-00MHZ 00W BI-DIRECTIONL MPLIFIER DESCRIPTION This class B LDMOS module is designed for both military and commercial applications. It is capable of supporting any signal type and modulation format,
Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
RFM XR. 2-30MHz 500W Class AB Linear Amplifier. Maximum Ratings Operation beyond these ratings will void warranty.
Class AB 500W XR-rated linear amplifier 2-30MHz bandwidth 27dB typical gain 64% typical efficiency +/- 1.0dB typical gain flatness Temperature-compensated bias Optional TTL disable The RFM2-30-500XR is
PAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
Model C2327J5003AHF Rev D
Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.
Series CCP-47N Low PIM DC 3 GHz Latching TRANSFER Coaxial Switch
COAX SWITCHES Series CCP-47N PART NUMBER CCP-47N DESCRIPTION Commercial Latching TRANSFER, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
Electrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
Model 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations
Digital Step Attenuator
, Step, 6 Bit, Parallel Control Interface Dual Supply Voltage 50W DC-2400 MHz Product Features Low Insertion Loss High IP3, +5m Typ Excellent return loss, 2 Typ Excellent accuracy, 0. Typ Fast switching
Low voltage LNA, mixer and VCO 1GHz
DESCRIPTION The is a combined RF amplifier, VCO with tracking bandpass filter and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a
Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
RELEASED MSW2T-23-192/MSW2T-231-192/MSW2T-232-192 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 5 MHz to 6 GHz Surface Mount SP2T Switch: 5mm x 8mm x 2.5mm Industry
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer IN 1000-S N = 1000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed loop (compensated)
MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
RELEASED MSW2T-23-192/MSW2T-231-192/MSW2T-232-192 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 5 MHz to 6 GHz Surface Mount SP2T Switch: 5mm x 8mm x 2.5mm Industry
Model BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
Model 176 and 178 DC Amplifiers
Model 176 and 178 DC mplifiers Features*! Drifts to 100 MΩ! CMR: 120 db @! Gain Linearity of ±.005% *The key features of this amplifier series, listed above, do not necessarily apply
Frequency Range: MHz. Efficiency: 80% Temperature Range: -20 to 65 C Max VSWR: 3:1. Class: Supply Voltage: 32.0V
Part Number Revision 0.B Release Date October 19, 2007 Revision Notes Final production release Amplifier Name Technical Specifications Summary Frequency Range: 86-108 MHz P1dB: 500 Watts CW Class: C Supply
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Solid State General Communication Power Amplifier
The GCS1D2GUT (SKU 4062) is suitable for broadband high power linear applications in the HF frequency range. This rack mount amplifier utilizes pushpull MOSFET power devices that provide high gain, wide
8450 Series CellGuard TM Power / VSWR Monitors
8450 Series TM Power / VSWR Monitors Precision Power and VSWR Measurements via Integral High Directivity Coupler (35 db typical) and Imbedded Microprocessor. True RMS Power Measurement over a 30 db Dynamic
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
MSW3T SP3T Surface Mount High Power PIN Diode Switch
RELEASED MSW3T-3200-150 SP3T Surface Mount High Power PIN Diode Switch Features: Surface Mount SP3T Switch: 9mm x 6mm x 2.5mm Range: 50 MHz to 3.0 GHz Industry Leading Average Power Handling: +50 m (CW)
HMC612LP4 / 612LP4E v
HMC6LP4 / 6LP4E v.8 DETECTOR / CONTROLLER, 5 Hz - MHz Typical Applications Features The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power
RFM HSD MHz 350W Class A/AB High Performance Amplifier with High Speed Disable
Class A/AB 350W linear amplifier Fast output disable,
= +25 C, Vcc1 = Vcc2 = Vcc3 = +5V
v1.19 DC - 7 MHz, 1 kohm Typical Applications The is ideal for: Laser Sensor FDDI Receiver CATV FM Analog Receiver Wideband Gain Block Low Noise RF Applications Features 1 kohm Transimpedance Very Low
Series CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
Series CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S/CT-38S PART NUMBER CCT-38S CT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-18GHz Elite Normally Open Multi-throw, DC-22GHz The CCT-38S/CT-38S is an internally terminated,
HMC600LP4 / 600LP4E POWER DETECTORS - SMT. 75 db LOGARITHMIC DETECTOR / CONTROLLER MHz. Features. Typical Applications. General Description
v.99 HMC6LP4 / 6LP4E 7 db LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4 / HMC6LP4E is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless Power
RFM XR. 2-30MHz 500W Class AB Linear High Performance Amplifier. Maximum Ratings Operation beyond these ratings will void warranty.
Class AB 500W XR-rated linear amplifier 2-30MHz bandwidth 27dB typical gain 64% typical efficiency +/- 1.1dB typical gain flatness Temperature-compensated bias TTL disable The RFP2-30-500XR is an XR-rated
Frequency Synthesizer
50Ω 3700 MHz (fixed) The Big Deal Low phase noise and spurious Fixed frequency without external programming Integrated microcontroller Robust design and construction Case size 2.75" x 1.96" x 0.62" CASE
Specification for Radiated susceptibility Test
1 of 11 General Information on Radiated susceptibility test Supported frequency Range : 20MHz to 6GHz Supported Field strength : 30V/m at 3 meter distance 100V/m at 1 meter distance 2 of 11 Signal generator
Insertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
Products. Dielectric Resonators. Description: Specifications: Attenuation:
Dielectric Resonators Products Description: K&L s Dielectric Resonator Bandpass Filters are available in standard packages with a basic Chebychev design. Connectors available are SMA and RF pins. Through
Features OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V
v3.121.1-15 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1, 2,, 8) Typical Applications The is ideal for: Satellite Communication Systems Point-to-Point & Point-to-Multi-Point Radios Military Applications Test
MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
RELEASED MSW2T-2040-193/MSW2T-2041-193 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 4 GHz Surface Mount SP2T Switch: 5mm x 8mm x 2.5mm Industry Leading
GPS Time and Frequency Reference Receiver
$ GPS Time and Frequency Reference Receiver Symmetricom s 58540A GPS time and frequency reference receiver features: Eight-channel, parallel tracking GPS engine C/A Code, L1 Carrier GPS T-RAIM satellite
HMC601LP4 / 601LP4E POWER DETECTORS - SMT. 75 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER MHz. Typical Applications.
v.9 HMC6LP4 / 6LP4E 7 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless
772D coaxial dual-directional coupler 773D coaxial directional coupler. 775D coaxial dual-directional coupler 776D coaxial dual-directional coupler
72 772D coaxial dual-directional coupler 773D coaxial directional coupler 775D coaxial dual-directional coupler 776D coaxial dual-directional coupler 777D coaxial dual-directional coupler 778D coaxial
PA FAN PLATE ASSEMBLY 188D6127G1 SYMBOL PART NO. DESCRIPTION. 4 SBS /10 Spring nut. 5 19A702339P510 Screw, thread forming, flat head.
MAINTENANCE MANUAL 851-870 MHz, 110 WATT POWER AMPLIFIER 19D902797G5 TABLE OF CONTENTS Page DESCRIPTION.............................................. Front Page SPECIFICATIONS.................................................
Features. = +25 C, Vdc = +12V
Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T
POWER DIVIDERS/COMBINERS
POWR DVDRS/COMBNRS POWR DVDRS/COMBNRS 55 PPLCTONS Combining and dividing for power amplifier chains Combining multiple signal sources ntenna feed networks Test bench equipment FTURS High power to 500 watts
Features OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
1GHz low voltage LNA, mixer and VCO
DESCRIPTION The is a combined RF amplifier, VCO with tracking bandpass filter and mixer designed for high-performance low-power communication systems from 800-1200MHz. The low-noise preamplifier has a
HMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
MITEQ, Inc. AMF AMPLIFIERS TYPICAL ACCEPTANCE TEST PROCEDURES USING MANUAL METHOD
DSH NO. PPLICTION NEXT SSY USED ON REVISIONS LTR DESCRIPTION DTE PPROVED INITIL RELESE 3/28/2006 MEron MITEQ, Inc. MF MPLIFIERS TYPICL CCEPTNCE TEST PROCEDURES USING MNUL METHOD LL PGES RE OF ORIGINL ISSUE
MSW2T /MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
PRELIMINARY MSW2T-2030-192/MSW2T-2031-192/MSW2T-2032-192 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 6 GHz Surface Mount SP2T Switch 5mm x 8mm x 2.5mm
Agilent 87222C/D/E Coaxial Transfer Switches dc to 26.5, 40, 50 GHz
Agilent 87C/D/E Coaxial Transfer Switches dc to 6.5, 0, 50 GHz Technical Overview High Performance Transfer Switches for Micro wave and RF Instrumentation and Systems Exceptional repeatability for more
Features. = +25 C, Vcc = +5V [1]
![Features. = +25 C, Vcc = +5V [1]](/thumbs/80/81652748.jpg "Features. = +25 C, Vcc = +5V [1]")
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
5100 Series L-Band Fiber Optic Links
LBand Fiber Optic Links The 5100Series fiber optic interfacility links (IFLs) are a high performance, costeffective alternative to coaxial cable for 950 MHz to 2050 MHz LBand satellite communications applications.
Features OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
100W Wide Band Power Amplifier 6GHz~18GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz Gain db
100W Wide Band Power Amplifier 6GHz~18GHz Features Wideband Solid State Power Amplifier Psat: +50dBm Gain: 75 db Typical Supply Voltage: +48V On board microprocessor driven bias controller. Electrical
Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
Passive 1X2 GPS Splitter Technical Product Data
L D C B S 1 X 2 Passive 1X2 GPS Splitter Technical Product Data Features Amplitude Balance J1 J2 < 1.0dB Extremely Flat Group Delay Less that 1ns variation Low Insertion Loss Passes all GNSS Frequencies
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
SCG002 HIGH LINEARITY BROADBAND AMPLIFIER
SCG2 Features DC to 6 MHz 2 db Gain at 1 MHz 15 dbm Output P1dB at 1 MHz 29 dbm Output IP3 at 1 MHz 3.8 db Noise Figure at 2 MHz Applications Broadband Gain Blocks High Linearity Amplifiers Packages Available
BIRD ELECTRONIC CORPORATION
BIRD ELECTRONIC CORPORATION Application Note Straight Talk About Directivity Application Note: Effects of Directivity on Power, VSWR and Return Loss Measurement Accuracy, / 475-APP-0404RV2 INTRODUCTION
RF-LAMBDA. ABSORPTIVE 2-4 GHz 6 Bits 64dB PIN DIODE ATTENUATOR. Absorptive Pin Diode Attenuator 6 Bits 64dB 2-4GHz RFDAT0204G6A.
7 65 6 55 5 5 35 3 25 2 5 5 Frequenc y (GHz) 2- Attenuation Value Insert. Loss 3.dB typ. 3.5dB max. ABSORPTIVE 2- GHz 6 Bits 6dB PIN DIODE ATTENUATOR VSWR Control bits Features Wide Band Operation 2.-.GHz
Voltage Variable Equalizer
Surface Mount Voltage Variable Equalizer 5Ω 95 to 2 MHz The Big Deal Adjustable attenuation slope Supply voltage from + to + IP3 +55 dbm typical Minimal deviation from linear loss, ±.5dB CASE STYLE: HE1354
Cavity Filters. Waveguide Filters
Cavity Cavity Filters K&L Microwave s series of cavity filters covers the frequency range from 30 MHz to 40 GHz. These filters are available with 2 to 17 resonant sections and bandwidths from 0.2% to 50%.
Miniature Front End Radar Warning Receiver
Miniature Front End Radar The is designed for Radar (RWR) applications where small size and low power consumption are of prime importance, with filtering, amplification, detection and frequency measurement
Wulfsberg Electronics Division A Chelton Group Company RESOLVING RADIO INTERFERANCE PROBLEMS REVISIONS 7/7/98.
REV PPROVLS DTE REVISIONS SH 1 DRWN CHECKED Robert DeLong Steve Elliott 7/7/98 7/7/98 REV DESCRIPTION DTE PPROVED INITIL RELESE ENGINEER Robert DeLong 7/7/98 150-040051 ISSUED Steve Elliott 7/7/98 DOC
Broadcast Concepts Inc NW 102 Road Suite 4 Medley FL Tel: : Fax Model P50FM42MH-SMA2 FM Pallet Amplifier Module
Model P50FM42MH-SMA2 FM Pallet Amplifier Module This amplifier module is ideal for driver stages in FM Broadcast transmitters. 86 110MHz 28Volts Pout: 50W CW minimum 40dB Gain Class AB MACOM MRF173 Mosfet
ATSBT-BOTTOM-FM-4G. Electrical Specifications. Product Classification. General Specifications. Mechanical Specifications. Bottom Smart Bias Tee
Electrical Specifications EU Certification Bottom Smart Bias Tee Injects AISG power and control signals onto a coaxial cable line Reduces cable and site lease costs by eliminating the need for AISG home
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
Reflective Coaxial SP2T Switch 50 700MHz Electrical Specifications, TA = +25 C, Vdd = +5V/-28V, TTL = 0 / +5V Description Features Wide Band Operation 50-700MHz TTL compatible driver included Fast Switching
HMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
+5V MAX3654 FTTH VIDEO TIA IN+ TIA IN- + OPAMP - Maxim Integrated Products 1
19-3745; Rev 0; 7/05 47MHz to 870MHz Analog CATV General Description The analog transimpedance amplifier (TIA) is designed for CATV applications in fiber-to-the-home (FTTH) networks. This high-linearity
3dB HYBRID COUPLER. Amplitude Balance db (max) ± ± to +85
FEATURES High Power Low Profile Surface Mount Package Very Low Insertion Loss Excellent Amplitude and Phase Balance High Isolation RoHS Tape and Reel for High Volume Production APPLICATIONS Power Amplifiers
HMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
Series CCR-39S/CR-39S Multi-Throw DC-18 GHz/DC-22 GHz Latching Coaxial Switch
PART NUMBER CCR-39S CR-39S DESCRIPTION Commercial Latching Multi-throw, DC-8GHz Elite Latching Multi-throw, DC-22GHz The CCR-39S/CR-39S is a broadband, multi-throw, electromechanical coaxial switch designed
RS3400W/04 77 GHz Radar Sensor
Features Complete 76-77GHz band FMCW Radar Front End Synthesized frequency source Wideband Sweep Description The RS34W/4 is a W-band FMCW radar front end featuring synthesized frequency sweeps. A fast
SP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V
Solid state SP4T RF Switch 50 Ω Absorptive RF switch 1 to 00 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V The Big Deal High isolation, 57 db up to 2.7 GHz High linearity, IP3 +58 dbm at 1900
Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver
(ANN-2005) Rev B Page 1 of 13 Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver Trong N Duong RF Co-Op Nithya R Subramanian RF Engineer Introduction The tradeoff
CPDC2X1. 2X1 GPS Combiner Technical Product Data
CPDC2X1 2X1 GPS Combiner Technical Product Data Features Excellent Flatness Extremely Flat Group Delay Less that 1ns variation Low Insertion Loss Passes all GNSS Frequencies (Entire L-band) Provides Antenna
ytivac Cavity Filters
Cavity Cavity Filters K&L Microwave s series of cavity filters covers the frequency range from 30 MHz to 40 GHz. These filters are available with 2 to 17 resonant sections and bandwidths from 0.2% to 50%.
ADG918/ADG919. Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches
Wideband 4 GHz, 43 db Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches ADG918/ FEATURES Wideband switch: 3 db @ 4 GHz Absorptive/reflective switches High off isolation (43 db @ 1 GHz) Low