Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B

Size: px
Start display at page:

Download "Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B"

Transcription

1 Analog Voltage/Pulse Train Reference Type SERVOPACKs SGDV- 0 (For Rotary Servomotors) SGDV- 05 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B Options Base-mounted, varbish(standard) vseries SGDV SERVOPACK Cooling Method Single-phase, 200VAC Input (model: SGDV-20A0A008000) A Fan-Cooling B Fanless Cooling Voltage F A VAC 200 VAC 0 Analog voltage/pulse train reference type (for rotary servomotors) Current D 400 VAC 05 Analog voltage/pulse train reference type (for linear servomotors) 207 V (Single Phase) 200 V (Three Phase) 400 V (Three Phase) Applicable Servomotor Max. Capacity k Applicable Servomotor Max. Capacity k Applicable Servomotor Max. Capacity k R R70* 0.05 R9 0.5 R90 0. R90* 0. 3R5.0 2R 0.2 R6* 0.2 5R4.5 2R R8* 0.4 8R R R5* R ** NOTE: Shaded items are non-stock * These amplifiers can be powered with single or three-phase. 590 ** SGDV-20A A008000, a special version of the.5k amplifier can be used for single-phase operation.

2 SGLG ( コアレス形 ) Features Unprecedented ease-of-use through cutting-edge technology New tuning-less function means no adjustment needed. Impressive load regulation with strengthened vibration suppression function. Slashed setup time Setup wizard function and wiring conformation function of engineering tool Sigmain+ allows easy setup just by watching the monitor. High response characteristics at khz min. New advanced autotuning. Reduced positioning time through model following control, and smooth machine control enabled by vibration suppression function. Ratings Single-phase V SERVOPACK Model SGDV- R70F R90F 2RF 2R8F Applicable Servomotor Max. Capacity k (Single Phase) to 5 VAC+% to -5% 50/60 Hz Control Circuit (Single Phase) to 5 VAC+% to -5% 50/60 Hz Single-phase 200 V SERVOPACK Model SGDV- R70A R90A R6A 2R8A 5R5A 20 Applicable Servomotor Max. Capacity k (Single Phase) 220 to 230 VAC +% to -5% 50/60 Hz Control Circuit (Single Phase) 220 to 230 VAC +% to -5% 50/60 Hz Three-phase 200 V SERVOPACK Model SGDV- R70A R90A R6A 2R8A 3R8A 5R5A 7R6A 20A 80A 200A 330A 470A 550A 590A 780A Applicable Servomotor Max. Capacity k Three-phase 200 to 230 VAC+% to -5% 50/60 Hz Control Circuit Single-phase 200 to 230 VAC+% to -5% 50/60 Hz Three-phase 400 V SERVOPACK Model SGDV- R9D 3R5D 5R4D 8R4D 20D 70D 2D 260D 280D 370D Applicable Servomotor Max. Capacity k Three-phase 380 to 480 VAC+% to -5% 50/60 Hz Control Circuit 24 VDC ±5% SERVOPACK Overload Characteristics Analog/Pulse Type SERVOPACKs SGMJV SGMAV-02, 04, 06, 08 SGMPS SGMAV-A5, 0, C2 SGMGV-44A, -55A, -75A SGMGV-03A, -05A, -09A, -3A -20A, -30A, -AA, -EA SGMGV- D SGMSV Torque reference(percent of rated torque) (%) Torque reference(percent of rated torque) (%) Rated torque Approx. Rated torque + Max. torque 2 Max. torque Note: Overload characteristics shown above do not guarantee continuous duty of % or more output. Use a servomotor with effective torque within the continuous duty zone of Torque-Motor Speed Characteristics. 208

3 Input Power Supply Control Method Feedback V Single-phase to 5 VAC + % to - 5% 50/60 Hz 200 V Three-phase 200 to 230 VAC + % to - 5% 50/60 Hz 400 V Three-phase 380 to 480 VAC + % to - 5% 50/60 Hz V Single-phase to 5 VAC + % to - 5% 50/60 Hz Control Circuit 200 V Single-phase 200 to 230 VAC + % to - 5% 50/60 Hz 400 V 24 VDC ± 5% For V, for 200 V, for 400 V, single-phase or three-phase full-wave rectification IGBT PM control, sine-wave driven Serial encoder: 3-bit (incremental encoder) Rotary Servomotors : 7-bit (incremental/absolute encoder) : 20-bit (incremental/absolute encoder) Linear Servomotors Serial converter or serial data Surrounding/Storage Temperature Surrounding temperature: 0 to + 55 C, storage temperature: - 20 to + 85 C Ambient/Storage Humidity 90%RH or less (no condensation) Vibration/Shock Resistance Vibration resistance: 4.9 m/s 2, Shock resistance: 9.6 m/s 2 Protection class: IP X, pollution degree: 2 Do not use SERVOPACKs in the following locations: Operating Protection class/pollution degree Locations subject to corrosive or flammable gasses Conditions Locations subject to exposure to water, oil, or chemicals Locations subject to dust, including iron dust, and salts Others Do not use SERVOPACKs in the following locations: Locations subject to static electricity noise, strong electromagnetic/magnetic fields, radioactivity Elevation m or less Compliant Standards UL 508C EN5078, EN550 class A group, EN6800-3, EN Configuration Base-mounted (Rack-mounting available as an option for some models. 6 k or more models are duct-ventilated.) Speed Control Range :5000 (The lowest speed of the speed control range is the speed at which the servomotor will not stop with a rated torque load.) Load Regulation 0% to % load: ± 0.0% max. (at rated speed) Performance Speed Regulation* Voltage Regulation Rated voltage : ± % : 0% (at rated speed) Temperature Regulation 25±25 C : ±0.% max. (at rated speed) Torque Control Tolerance (Repeatability) ± % Soft Start Time Setting 0 to s (can be set individually for acceleration and deceleration.) I/O Signals Encoder Output Pulses Digital operator, RS-422A port of personal computers etc. RS-422A :N communications RS-422A port: N= 5 max. available Axis address setting Set by parameters Status display, parameter settings, adjustment functions, utility functions, parameter copy functions Personal computers (application: engineering tool Sigmain+) USB :N communications Compliant with USB. standard Status display, parameter settings, adjustment functions, utility functions, parameter copy functions, waveform trace Power Charge CHARGE for main circuit power supply input confirmation One LED (orange) Analog Monitor Analog monitor connector built in for monitoring speed, torque and other reference signals. Number of points: 2 Protective s Overcurrent, Overvoltage, low voltage, overload, regeneration error Utility s Alarm history, JOG operation, origin search, etc. VAC model: External regenerative resistor (optional) 200 VAC SGDV-R70A, -R90A, -R6A, -2R8A: External regenerative resistor (optional) Regenerative Processing 200 VAC SGDV-470A, -550A, -590A, -780A: External regenerative resistor unit (optional) 200 VAC models other than shown above: Built-in regenerative resistor 400 VAC SGDV-2D, -260D, -280D, -370D: External regenerative resistor unit (optional) 400 VAC models other than shown above: Built-in regenerative resistor Input /HBB, /HBB2: Hard wire base block signal Safety s Output EDM: Status monitor (fixed output) of built-in safety circuit Compliant Standards EN954 category 3 Stop category 0, IEC6508 SIL 2 Option Card Feedback Serial encoder communications input for fully-closed loop control *: Speed regulation is defined as follows: Speed regulation = No-load motor speed - Total load motor speed % Rated motor speed The motor speed may change due to voltage variations or temperature variation. The ratio of speed changes to the rated speed represent speed regulation due to voltage and temperature variations. 209

4 Analog/Pulse Type SERVOPACKs SGDV- 0/05 Rotary Servomotors Encoder Output Pulses Fixed Input SEN signal Number of Channels 7 channels The signal allocation and positive/negative logic can be modified. Sequence Input Input Signals which can be allocated s Servo On (/S-ON), proportional control (/P-CON), alarm reset (/ALM-RST), forward run prohibited (P-OT), reverse run prohibited (/N-OT), forward torque limit (/P-CL), reverse torque limit(/n-cl), I/O Signal internal set speed selection (/SPD-D, / SPD-A, /SPD-B), control selection (/C-SEL), zero clamping (/ZCLAMP), reference pulse inhibit (/INHIBIT), gain selection (/G-SEL) Fixed Output Servo alarm (ALM), alarm code (ALO, ALO2, ALO3) outputs Number of 3 channels Channels Sequence Output Output Signals which can be allocated s The signal allocation and positive/negative logic can be modified. Positioning completion (/COIN), speed coincidence detection (/V-CMP), servomotor rotation detection (/TGON), servo ready (/S-RDY), torque limit detection (/CLT), speed limit detection (/VLT), brake interlock (/BK), warning (/RAN), near (/NEAR) Panel Operator Switch 7-segment 5-digit LED (Red) Push switch: 4 channels Reference Voltage ± 3 VDC (Variable setting range: ± to VDC) at rated torque, max. input voltage: ± 2 V Torque Control Analog Input Input Impedance About 4 kω min. Speed Control Position Control Analog Input Circuit Time Constant Reference Voltage Input Impedance Circuit Time Constant 6 μs ± 6 VDC (variable setting range: ± 2 to VDC) at rated speed, max. input voltage: ± 2 V About 4 kω min. 30 μs Rotation Direction Internal Set Speed Switches the direction by /P-CON (/SPD-D) Selection Control Speed Selection Speed to 3 selection Soft Start Setting 0 to s (can be set individually for acceleration and deceleration.) Type Sign + pulse train, 90 phase difference 2-phase pulse (phase A + phase B), or CC + C pulse train Form Non-insulated line driver ( + 5 V level), open collector Sign+ Pulse train : 4 Mpps C+ CC pulse train : 4 Mpps Reference Pulse 90 phase difference 2-phase pulse Max. Input Pulse multiplier : Mpps (before mlutiplier) Frequency* 2 multiplier : Mpps (before mlutiplier) 4 multiplier : Mpps (before mlutiplier) Open collector : 200 kpps Clear Signal Clears error pulse by external signals. Form Applicable to line driver, open collector Analog/Pulse Type SERVOPACKs *: If the maximum reference frequency exceeds Mpps, use a shielded cable for I/O signals and ground both ends of the shield. Connect the shield at the SERVOPACK to the connector shell. 2

5 Linear Servomotors Encoder Output Pulses Number of Channels 7 channels The signal allocation and positive/negative logic can be modified. Servo ON (/S-ON), proportional control (/P-CON), Sequence Input Input Signals which can be allocated s alarm reset (/ALM-RST), forward run prohibited (P-OT), reverse run prohibited (N-OT), forward external force limit (/P-CL), reverse external force limit (/N-CL), internal set speed selection (/SPD-D, /SPD-A, /SPD-B), I/O Signal control selection (/C-SEL), zero clamping (/ZCLAMP), reference pulse inhibit (/INHIBIT), gain selection (/G-SEL), polarity detection (P-DET) Fixed Output Servo alarm (ALM), alarm code (ALO, ALO2, ALO3) outputs Number of 3 channels Channels Sequence Output Output Signals which can be allocated s The signal allocation and positive / negative logic can be modified. Positioning completion (/COIN), speed coincidence detection (V/CMP), servomotor movement detection (/TGON), servo ready (/S-RDY), force limit detection (/CLT), speed limit detection (/VLT), brake interlock (/BK), warning (/ARN), near (/NEAR) Panel Operator Switch 7-segment 5-digit LED (Red) Push switch: 4 channels Reference Voltage ± 3 VDC (variable setting range: ± to VDC), max. input voltage: ± 2 V Force Control Analog Input Input Impedance About 4 kω min. Circuit Time Constant 6 μs Reference Voltage ± 6 VDC (variable setting range: ± 2 to VDC) at rated speed, max. input voltage: ± 2 V Analog Input Input Impedance About 4 kω min. Speed Control Position Control Circuit Time Constant 30 μs Internal Set Speed Movement Direction Selection /P-CON (/SPD-D) signal Control Speed Selection Speed to 3 selection Soft Start Setting 0 to s (can be set individually for acceleration and deceleration.) Type Sign+ pulse train, 90 phase difference 2-phase pulse (phase A+ phase B), or CC+ C pulse train Form Non-insulated line driver (+ 5 V level), open collector Sign+ Pulse train : 4 Mpps C+ CC pulse train : 4 Mpps Reference Pulse 90 phase difference 2-phase pulse Max. Input Pulse multiplier : Mpps (before mlutiplier) Frequency* 2 multiplier : Mpps (before mlutiplier) 4 multiplier : Mpps (before mlutiplier) Open collector : 200 kpps Clear Signal Clears error pulse by external signals. Form Applicable to line driver, open collector *: If the maximum reference frequency exceeds Mpps, use a shielded cable for I/O signals and ground both ends of the shield. Connect the shield at the SERVOPACK to the connector shell. 2

6 Analog/Pulse Type SERVOPACKs SGDV- 0/05 Power Supply Capacities and Power Losses The following table shows SERVOPACK's power supply capacities and power losses at the rated output. Power Supply Applicable Servomotor Max. Capacity k SERVOPACK Model SGDV- Power Supply Capacity kva Output Current A Power Loss Regenerative Resistor Power Loss Control Circuit Power Loss Total Power Loss Signal-phase V Single-phase 200 V Three-phase 200 V Three-phase 400 V 0.05 R70F R90F RF R8F R70A R90A R6A R8A R5A A R70A R90A R6A R8A R8A R5A R6A A A A A A (80) * A A (350) * A R9D R5D R4D R4D D D D (80) * D D (350) * D *: For the optional JUSP-RA04-E regenerative resistor unit. *2: For the optional JUSP-RA05-E regenerative resistor unit. *3: For the optional JUSP-RA8-E regenerative resistor unit *4: For the optional JUSP-RA9-E regenerative resistor unit. Notes: SGDV-R70F, -R90F, -2RF, -2R8F, -R70A, -R90A, -R6A, and -2R8A SERVOPACKs do not have built-in regenerative resistors. If the regenerative energy exceeds the specified value, connect an external regenerative resistor (optional). 2 SGDV-470A, -550A, -590A, -780A, -2D, -260D, -280D, -370D SERVOPACKs do not have built-in regenerative resistors. Be sure to connect a regenerative resistor unit (optional) or an external regenerative resistor (optional). 3 Regenerative resistor power losses are allowable losses. Take the following action if this value is exceeded. Remove the lead or short bar that is short-circuiting the SERVOPACK main circuit terminal B2 and B3. (SGDV-3R8A, -5R5A, -7R6A, -20A, -80A, -200A, -330A, or 400-V class SERVOPACKs.) Install an external regenerative resistor (optional). Analog/Pulse Type SERVOPACKs 22

7 MECHATROLINK-II Reference Type SERVOPACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B Options Base-mounted, varbish(standard) vseries SGDV SERVOPACK Cooling Method Single-phase, 200VAC Input (model: SGDV-20A0A008000) A Fan-Cooling B Fanless Cooling Voltage F A VAC 200 VAC MECHATROLINK-II communications Reference Type (for rotary servomotors) Current D 400 VAC 5 MECHATROLINK-II communications Reference Type (for linear servomotors) 23 V (Single Phase) 200 V (Three Phase) 400 V (Three Phase) Applicable Servomotor Max. Capacity k Applicable Servomotor Max. Capacity k Applicable Servomotor Max. Capacity k R R70* 0.05 R9 0.5 R90 0. R90* 0. 3R5.0 2R 0.2 R6* 0.2 5R4.5 2R R8* 0.4 8R R R5* R ** NOTE: Shaded items are non-stock * These amplifiers can be powered with single or three-phase. 590 ** SGDV-20A A008000, a special version of the.5k amplifier can be used for single-phase operation.

8 MECHATROLINK-II Type SERVOPACKs SGDV- /5 Features Real-time communications MECHATROLINK-II communications enable high-speed control for 30 stations at a maximum transmission speed of Mbps in a transmission cycle from 250 μs to 4 ms (user setting). Such a high transmission speed allows real-time transmission of various data required for control. Cost savings Thirty stations can be connected to a single MECHATROLINK-II transmission line, so wiring costs and time are greatly reduced. Also, only one signal connector is required on the host controller. And, the all-digital network eliminates the need for conversion from digital to analog for speed/torque references and for a pulse generator to generate position references. High-precision motion control The SGDV SERVOPACK when connected to the host controller in the MECHATROLINK-II network provides not only torque, position, and speed control but also synchronized phase control that requires advanced control technology. The control mode can be changed online so that the machine can move smoothly in complex motions with great efficiency. Ratings Single-phase V SERVOPACK Model SGDV- R70F R90F 2RF 2R8F Applicable Servomotor Max. Capacity k (Single Phase) to 5 VAC+% to -5% 50/60 Hz Control Circuit (Single Phase) to 5 VAC+% to -5% 50/60 Hz Single-phase 200 V SERVOPACK Model SGDV- R70A R90A R6A 2R8A 5R5A 20 Applicable Servomotor Max. Capacity k (Single Phase) 220 to 230 VAC +% to -5% 50/60 Hz Control Circuit (Single Phase) 220 to 230 VAC +% to -5% 50/60 Hz Three-phase 200 V SERVOPACK Model SGDV- R70A R90A R6A 2R8A 3R8A 5R5A 7R6A 20A 80A 200A 330A 470A 550A 590A 780A Applicable Servomotor Max. Capacity k Control Circuit Three-phase 200 to 230 VAC+% to -5% 50/60 Hz Single-phase 200 to 230 VAC+% to -5% 50/60 Hz Three-phase 400 V SERVOPACK Model SGDV- R9D 3R5D 5R4D 8R4D 20D 70D 2D 260D 280D 370D Applicable Servomotor Max. Capacity k SGMJV Torque reference(percent of rated torque) (%) SGMAV-02, 04, 06, 08 SGMPS SGMAV-A5, 0, C Torque reference(percent of rated torque) (%) Three-phase 380 to 480 VAC+% to -5% 50/60 Hz Control Circuit 24 VDC ±5% SERVOPACK Overload Characteristics Rated torque Approx. SGMGV-44A, -55A, -75A SGMGV-03A, -05A, -09A, -3A -20A, -30A, -AA, -EA SGMGV- D SGMSV- Rated torque + Max. torque 2 Max. torque MECHATROLINK-II Type SERVOPACKs Note: Overload characteristics shown above do not guarantee continuous duty of % or more output. Use a servomotor with effective torque within the continuous duty zone of Torque-Motor Speed Characteristics. 232

9 Input Power Supply Control Method Feedback V Single-phase to 5 VAC + % to - 5% 50/60 Hz 200 V Three-phase 200 to 230 VAC + % to - 5% 50/60 Hz 400 V Three-phase 380 to 480 VAC + % to - 5% 50/60 Hz V Single-phase to 5 VAC + % to - 5% 50/60 Hz Control Circuit 200 V Single-phase 200 to 230 VAC + % to - 5% 50/60 Hz 400 V 24 VDC ± 5% For V, for 200 V, for 400 V, single-phase or three-phase full-wave rectification IGBT PM control, sine-wave driven Serial encoder: 3-bit (incremental encoder) Rotary Servomotors : 7-bit (incremental/absolute encoder) : 20-bit (incremental/absolute encoder) Linear Servomotors Serial converter or serial data Surrounding/Storage Temperature Surrounding temperature: 0 to + 55 C, storage temperature: - 20 to + 85 C Ambient/Storage Humidity 90%RH or less (no condensation) Vibration/Shock Resistance Vibration resistance: 4.9 m/s 2, Shock resistance: 9.8 m/s 2 Protection class: IP X, pollution degree: 2 Do not use SERVOPACKs in the following locations: Operating Protection class/pollution degree Locations subject to corrosive or flammable gases Conditions Locations subject to exposure to water, oil, or chemicals Locations subject to dust, including iron dust, and salts Others Do not use SERVOPACKs in the following locations: Locations subject to static electricity noise, strong electromagnetic/magnetic fields, radioactivity Elevation m or less Compliant Standards UL 508C EN5078, EN550 class A group, EN6800-3, EN Configuration Base-mounted (Rack-mounting available as an option for some models. 6 k or more models are duct-ventilated.) Speed Control Range :5000 (The lowest speed of the speed control range is the speed at which the servomotor will not stop with a rated torque load.) Load Regulation 0% to % load: ± 0.0% max. (at rated speed) Speed Voltage Regulation Rated voltage : ± % : 0% (at rated speed) Performance Regulation* Temperature Regulation 25±25 C : ±0.% max. (at rated speed) Torque Control Tolerance (Repeatability) ± % Soft Start Time Setting 0 to s (can be set individually for acceleration and deceleration.) I/O Signals Encoder Output Pulses Digital operator, RS-422A port of personal computers etc. RS-422A :N communications RS-422A port: N= 5 max. available Axis address setting Set by parameters Status display, parameter settings, adjustment functions, utility functions Personal computers (application: engineering tool Sigmain+ ) USB :N communications Compliant with USB. standard Status display, parameter settings, adjustment functions, utility functions Power Charge CHARGE for main circuit power supply input confirmation One LED (orange) Analog Monitor Protective s Utility s Regenerative Processing Analog monitor connector built in for monitoring speed, torque and other reference signals. Number of points: 2 Overcurrent, Overvoltage, low voltage, overload, regeneration error Alarm history, JOG operation, origin search, etc. VAC model: External regenerative resistor (optional) 200 VAC SGDV-R70A, -R90A, -R6A, -2R8A: External regenerative resistor (optional) 200 VAC SGDV-470A, -550A, -590A, -780A: External regenerative resistor unit (optional) 200 VAC models other than shown above: Built-in regenerative resistor 400 VAC SGDV-2D, -260D, -280D, -370D: External regenerative resistor unit (optional) 400 VAC models other than shown above: Built-in regenerative resistor Input /HBB, /HBB2: Hard wire base block signal Safety s Output EDM: Status monitor (fixed output) of built-in safety circuit Compliant Standards EN954 category 3 Stop category 0, IEC6508 SIL 2 Option Card Feedback Serial encoder communications input for fully-closed loop control *: Speed regulation is defined as follows: 233 Speed regulation = No-load motor speed - Total load motor speed % Rated motor speed The motor speed may change due to voltage variations or temperature variation. The ratio of speed changes to the rated speed represent speed regulation due to voltage and temperature variations.

10 MECHATROLINK-II Type SERVOPACKs SGDV- /5 Rotary Servomotors Encoder Output Pulses Number of Channels 7 channels Sequence Input Signal allocations and positive/negative logics can be modified. Homing deceleration switch signal (/DEC), external latch signal (/EXT to 3), forward run prohibited (P-OT), reverse run prohibited (N-OT), I/O Signal Fixed Output forward current limit (/P-CL), reverse current limit (/N-CL) Servo alarm (ALM) Number of Channels 3 channels Sequence Output Output Signals which can be allocated Signal allocations and positive/negative logics can be modified. Positioning completion (/COIN), speed coincidence detection (/V-CMP), servomotor rotation detection (/TGON), servo ready (/S-RDY), torque limit detection (/CLT), speed limit detection (/VLT), brake interlock (/BK), warning (/ARN), NEAR (/NEAR) Panel Operator MECHATROLINK 7-segment -digit LED (red) Switch Rotary switch: 6 positions, DIP switch: 4 poles Protocol MECHATROLINK-II MECHATROLINK-I Transmission Speed Mbps 4 Mbps Transmission Cycle 250 μs, 0.5 to 4.0 ms (multiple of 0.5 ms) 2 ms Number of ords for Can be switched between Link Transmission 7-bytes /station and 32-bytes / station. 7-bytes /station Station Address 4H to 5FH (max. number of slaves: 30) Command Method Performance Command Input Position control, speed control, and torque control through MECHATROLINK communications MECHATROLINK commands (for sequence, motion, data setting/reference, monitor, adjustment, and other commands.) Linear Servomotors Encoder Output Pulses Sequence Input Number of Channels 7 channels Signal allocations and positive/negative logics can be modified. Homing deceleration switch signal (/DEC), external latch signal (/EXT to 3), forward run prohibited (P-OT), reverse run prohibited (N-OT), I/O Signal Panel Operator MECHATROLINK Command Method Sequence Output Fixed Output Output Signals which can be allocated forward current limit (/P-CL), reverse current limit (/N-CL) Servo alarm (ALM) Number of Channels 3 channels Signal allocations and positive/negative logics can be modified. Positioning completion (/COIN), speed coincidence detection (/V-CMP), servomotor movement detection (/TGON), servo ready (/S-RDY), force limit detection (/CLT), speed limit detection (/VLT), brake interlock (/BK), warning (/ARN), NEAR (/NEAR) 7-segment -digit LED (red) Rotary switch: 6 positions, piano switch: 4 poles Switch Protocol MECHATROLINK-II MECHATROLINK-I Transmission Speed Mbps 4 Mbps Transmission Cycle 250 μs, 0.5 to 4.0 ms (multiple of 0.5 ms) 2 ms Number of ords for Can be switched between Link Transmission 7-bytes /station and 32-bytes / station. 7-bytes /station Station Address 4H to 5FH (max. number of slaves: 30) Position control, speed control, and force control through Performance MECHATROLINK-II communications MECHATROLINK commands and MECHATROLINK-II commands Command Input (for sequence, motion, data setting/reference, monitor, adjustment, and other commands.) MECHATROLINK-II Type SERVOPACKs 234

11 MECHATROLINK-III Reference Type SERVOPACKs SGDV- 2 (For Rotary Servomotors) SGDV- 25 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B Options Base-mounted, varbish(standard) vseries SGDV SERVOPACK Cooling Method Single-phase, 200VAC Input (model: SGDV-20A0A008000) A Fan-Cooling B Fanless Cooling Voltage F A VAC 200 VAC 2 MECHATROLINK-III communications Reference Type (for rotary servomotors) Current D 400 VAC 25 MECHATROLINK-III communications Reference Type (for linear servomotors) 253 V (Single Phase) 200 V (Three Phase) 400 V (Three Phase) Applicable Servomotor Max. Capacity k Applicable Servomotor Max. Capacity k Applicable Servomotor Max. Capacity k R R70* 0.05 R9 0.5 R90 0. R90* 0. 3R5.0 2R 0.2 R6* 0.2 5R4.5 2R R8* 0.4 8R R R5* R ** NOTE: Shaded items are non-stock * These amplifiers can be powered with single or three-phase. 590 ** SGDV-20A A008000, a special version of the.5k amplifier can be used for single-phase operation.

12 Features Real-time communications MECHATROLINK-III communications enable high-speed control for 62 stations at a transmission speed of Mbps in a transmission cycle from 25 μs to 4 ms (user setting). Such a high transmission speed allows real-time transmission of various data required for control. Cost savings The 62 stations can be connected to a single MECHATROLINK-III transmission line, so wiring costs and time are greatly reduced. Also, only one signal connector is required on the host controller. And, the all-digital network eliminates the need for conversion from digital to analog for speed/torque references and for a pulse generator to generate position references. High-precision motion control The SGDV SERVOPACK when connected to the host controller in the MECHATROLINK-III network provides not only torque, position, and speed control but also synchronized phase control that requires advanced control technology. The control mode can be changed online so that the machine can move smoothly in complex motions with great efficiency. Ratings Single-phase V SERVOPACK Model: SGDV- R70F R90F 2RF 2R8F Applicable Servomotor Max. Capacity k Continuous Output Current Arms Max. Output Current Arms Control Circuit Single-phase to 5 VAC+% to -5% 50/60 Hz Single-phase to 5 VAC+% to -5% 50/60 Hz Three-phase 200 V SERVOPACK Model: SGDV- R70A R90A R6A 2R8A 3R8A 5R5A 7R6A 20A 80A 200A 330A 470A 550A 590A 780A Applicable Servomotor Max. Capacity k Continuous Output Current Arms Max. Output Current Arms Control Circuit Three-phase 200 to 230 VAC+% to -5% 50/60 Hz Single-phase 200 to 230 VAC+% to -5% 50/60 Hz Three-phase 400 V SERVOPACK Model: SGDV- R9D 3R5D 5R4D 8R4D 20D 70D 2D 260D 280D 370D Applicable Servomotor Max. Capacity k SERVOPACK Overload Characteristics Continuous Output Current Arms Max. Output Current Arms SGMJV Torque reference(percent of rated torque) (%) SGMAV-02, 04, 06, 08 SGMPS SGMAV-A5, 0, C Torque reference(percent of rated torque) (%) Three-phase 380 to 480 VAC+% to -5% 50/60 Hz Control Circuit 24 VDC ±5% Rated torque Approx. SGMGV-44A, -55A, -75A SGMGV-03A, -05A, -09A, -3A -20A, -30A, -AA, -EA SGMGV- D SGMSV- Rated torque + Max. torque 2 Max. torque MECHATROLINK-III Type SERVOPACKs Note: Overload characteristics shown above do not guarantee continuous duty of % or more output. Use a servomotor with effective torque within the continuous duty zone of Torque-Motor Speed Characteristics. 254

13 Control Method Feedback Rotary Servomotors ith Linear Servomotors Surrounding Air/Storage Temperature Ambient/Storage Humidity IGBT PM control, sine-wave driven Serial encoder: 3-bit (incremental encoder) : 7-bit (incremental/absolute encoder) : 20-bit (incremental/absolute encoder) Serial converter unit or linear scale Surrounding air temperature: 0 to + 55 C, Storage temperature: - 20 to + 85 C 90%RH or less (no condensation) Operating Conditions Vibration/Shock Resistance Vibration resistance: 4.9 m/s 2, Shock resistance: 9.6 m/s 2 Protection class: IP, pollution degree: 2 Do not use SERVOPACKs in the following locations: Protection Class/Pollution Degree Locations subject to corrosive or flammable gasses Locations subject to exposure to water, oil, or chemicals Locations subject to dust, including iron dust, and salts Do not use SERVOPACKs in the following locations: Others Locations subject to static electricity noise, strong electromagnetic/magnetic fields, radioactivity Altitude Applicable Standards (Pending) Configuration Speed Control Range m or less UL508C EN5078, EN550/A2 group classa, EN6-6-2, EN6800-3, EN , EN954-, IEC6508- to 4 Standard: Base-mounted Optional: Rack-mounted, Duct-ventilated :5000 (The lowest speed of the speed control range is the speed at which the servomotor will not stop with a rated torque load.) Performance Analog Monitor Dynamic Brake (DB) Protective s Utility s Load Fluctuation 0% to % load: ± 0.0% max. (at rated speed) Speed Voltage Fluctuation Rated voltage : ± % : 0% (at rated speed) Regulation * Temperature Fluctuation 25 ± 25 C : ± 0.% max. (at rated speed) Torque Control Tolerance (Repeatability) ± % Soft Start Time Setting 0 to s (can be set individually for acceleration and deceleration.) Digital operator (JUSP-OP05A--E), personal computer (can be connected with Sigmain+) RS-422A :N communications RS-422A port: N= 5 max. available Axis address setting Set by parameters USB Personal computer (can be connected with Sigmain+.) Standard Compliant with USB. standard (2 Mbps) CHARGE indicator Number of points: 2 Output voltage: ± VDC (linearity effective range ± 8 V) Resolution: 6 bit Accuracy: ± 20 mv (Typ) Max. output current: ± ma Settling time (±%):.2 ms (Typ) Activated when a servo alarm or overtravelling (OT) occurs, or when the power supply for the main circuit or servomotor is OFF. Overcurrent, Overvoltage, low voltage, overload, regeneration error, etc. Gain adjustment, alarm history, JOG operation, origin search, etc. Regenerative Processing Overtravelling (OT) Prevention Safety s Option Module *: Speed regulation is defined as follows: Input Output Applicable Standards (Pending) *2 VAC model: External regenerative resistor (optional) 200 VAC SGDV-R70A, -R90A, -R6A, -2R8A: External regenerative resistor (optional) 200 VAC SGDV-470A, -550A, -590A, -780A: External regenerative resistor unit (optional) 200 VAC models other than shown above: Built-in regenerative resistor 400 VAC SGDV-2D, -260D, -280D, -370D: External regenerative resistor unit (optional) 400 VAC models other than shown above: Built-in regenerative resistor Dynamic brake stop at P-OT or N-OT, deceleration to a stop, or free run to a stop /HBB, /HBB2: Baseblock signal for power module EDM: Status monitor (fixed output) of built-in safety circuit EN954 category 3, IEC6508 SIL2 Fully-closed option module 255 Speed regulation = No-load motor speed - Total load motor speed % Rated motor speed The motor speed may change due to voltage fluctuation or temperature fluctuation. The ratio of speed changes to the rated speed represent speed regulation due to voltage and temperature fluctuations. *2: Perform risk assessment for the system and confirm that the safety requirements for the standards are fulfilled before using the HBB function.

14 MECHATROLINK-III Type SERVOPACKs SGDV- 2/25 Rotary Servomotors I/O Signal Panel Operator MECHATROLINK Command Method Encoder Output Pulses Sequence Input Sequence Output Fixed Input Input Signals which can be allocated Fixed Output Output Signals which can be allocated SEN signal Number of Channels 7 channels Signal allocations and positive/negative logics can be modified. Homing deceleration switch signal (/DEC), external latch signal (/EXT to 3), forward run prohibited (P-OT), reverse run prohibited (N-OT), forward current limit (/P-CL), reverse current limit (/N-CL) Servo alarm (ALM) Number of Channels 3 channels Signal allocations and positive/negative logics can be modified. Positioning completion (/COIN), speed coincidence detection (/V-CMP), servomotor rotation detection (/TGON), servo ready (/S-RDY), torque limit detection (/CLT), speed limit detection (/VLT), brake (/BK), warning (/ARN), NEAR (/NEAR) 7-segment -digit LED (red), LED for MECHATROLINK (green) 3 Rotary switch: 6 positions 2, DIP switch: 4 poles MECHATROLINK-III Mbps 25 μs, 250 μs, 500 μs,750 μs, ms to 4 ms (increments of 0.5 ms) Switch Protocol Transmission Speed Transmission Cycle Number of ords for Can be switched between 6-bytes/station, 32-bytes/station and 48-bytes/station. Link Transmission Station Address 03H to EFH (max. number of slaves: 62) Position control, speed control, and torque control through Performance MECHATROLINK communications MECHATROLINK commands Command Input (for sequence, motion, data setting/reference, monitor, adjustment, and other commands.) Linear Servomotors Encoder Output Pulses Fixed Input SEN signal Number of Channels 7 channels Sequence Input Input Signals which Signal allocations and positive/negative logics can be modified. can be allocated Homing deceleration switch signal (/DEC), external latch signal (/EXT to 3), forward run prohibited (P-OT), reverse run prohibited (N-OT), I/O Signal forward current limit (/P-CL), reverse current limit (/N-CL) Fixed Output Servo alarm (ALM) Number of Channels 3 channels Sequence Output Output Signals which Signal allocations and positive/negative logics can be modified. Positioning completion (/COIN), speed coincidence detection can be allocated (/V-CMP), servomotor movement detection (/TGON), servo ready (/S-RDY), force limit detection (/CLT), speed limit detection (/VLT), brake (/BK), warning (/ARN), NEAR (/NEAR) Panel Operator 7-segment -digit LED (red), LED for MECHATROLINK (green) 3 Switch Rotary switch: 6 positions 2, DIP switch: 4 poles Protocol MECHATROLINK-III Transmission Speed Mbps MECHATROLINK Transmission Cycle 25 μs, 250 μs, 500 μs,750 μs, ms to 4 ms (increments of 0.5 ms) Number of ords for Link Transmission Can be switched between 6-bytes/station, 32-bytes/station and 48-bytes/station. Station Address 03H to EFH (max. number of slaves: 62) Position control, speed control, and force control through Performance MECHATROLINK communications Command Method MECHATROLINK commands Command Input (for sequence, motion, data setting/reference, monitor, adjustment, and other commands.) MECHATROLINK-III Type SERVOPACKs 256

15 Power Supply Capacities and Power Losses The following table shows SERVOPACK's power supply capacities and power losses at the rated output. Power Supply Applicable Servomotor Max. Capacity k SERVOPACK Model SGDV- Power Supply Capacity kva Output Current Arms Power Loss Regenerative Resistor Power Loss Control Circuit Power Loss Total Power Loss Signal-phase V Single-phase 200 V Three-phase 200 V Three-phase 400 V 0.05 R70F R90F RF R8F R70A R90A R6A R8A R5A ) A R70A R90A R6A R8A R8A R5A R6A A A A A A (80) * A A (350) * A R9D R5D R4D R4D D D D (80) * D D (350) * D *: For the optional JUSP-RA04-E regenerative resistor unit. *2: For the optional JUSP-RA05-E regenerative resistor unit. *3: For the optional JUSP-RA8-E regenerative resistor unit *4: For the optional JUSP-RA9-E regenerative resistor unit. Notes: SGDV-R70F, -R90F, -2RF, -2R8F, -R70A, -R90A, -R6A, and -2R8A SERVOPACKs do not have built-in regenerative resistors. If the regenerative energy exceeds the specified value, connect an external regenerative resistor (optional). 2 SGDV-470A, -550A, -590A, -780A, -2D, -260D, -280D, -370D SERVOPACKs do not have built-in regenerative resistors. Be sure to connect a regenerative resistor unit (optional) or an external regenerative resistor (optional).. 3 Regenerative resistor power losses are allowable losses. Take the following action if this value is exceeded. Remove the lead or short bar that is short-circuiting the SERVOPACK main circuit terminal B2 and B3. (SGDV-3R8A, -5R5A, -7R6A, -20A, -80A, -200A, -330A, or 400-V class SERVOPACKs.) Install an external regenerative resistor (optional). 257

(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase)

(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase) MECHATROLINK-III Communications Reference Type s SGDV- (For Rotary Servomotors) SGDV- (For Linear Servomotors) Designations SGDV - R70 A 0 B 00000 Options vseries SGDV Code 00000 Base-mounted, varbish(standard)

More information

(For Rotary Servomotors)

(For Rotary Servomotors) MECHATROLINK-III Communications Reference SERVOPACKs SGDV- E2 (For Rotary Servomotors) Designations S G D V - 2R9 E 2 A 002 00 0 v Series SGDV SERVOPACKs with DC Power Input st+2nd+ 3rd digits 4th digit

More information

4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors)

4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors) MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Model Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit

More information

SGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors)

SGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) Analog Voltage/Pulse Train Reference Type PACKs SGDV- 0 (For Rotary Servomotors) SGDV- 0 (For Linear Servomotors) Model Designations S G D V - R70 A 0 A 000 00 0 v Series SGDV PACK st+nd+ rd digits th

More information

4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface

4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th+6th

More information

(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits

(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th6th

More information

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001 AC SERVO DRIVES SERIES Servopacks Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202 CONTENTS SERVOPACKs Single-axis Analog Voltage/Pulse Train Reference SERVOPACKs 326 Single-axis MECHATROLINK-II

More information

SGDV- E5 (For Linear Servomotors)

SGDV- E5 (For Linear Servomotors) PACKs with Additional Options SGDV- E (For Rotary Servomotors) SGDV- E5 (For Linear Servomotors) Model Designations SGDV- R70 A E A 000 00 0 v Series SGDV PACK Current Voltage 00 V 400 V Code Applicable

More information

SERIES PRODUCT CATALOG

SERIES PRODUCT CATALOG AC SERVO DRIVES SERIES PRODUCT CATALOG s Field-Proven Performance: A Servo that Does What You Need! Certified for ISO900 and ISO400 JQA-04 JQA-EM00 Series Product Catalog s s with AC Power Input Options

More information

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive AC Servodrive Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor Analog Voltage and Pulse Train Reference SGMJV/SGMAV/SGMGV/SGMCS Servomotors SGDV SERVOPACK Outline Panel Operator Wiring

More information

Sigma-5 servo drive System configuration

Sigma-5 servo drive System configuration SGDV-@ Sigma- servo drive The High perfomance servo family for motion control. Compact size, reduced space and integrated MECHATROLINK-II. Advance autotuning function Enhanced vibration supression function

More information

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH CHARGE NS A R C N B C N 4 XD-@, XD-@-E Intelligent servo drive. Integrated controller and network connectivity. NCT. Patented non-linear algorithm for tight control Very low tracking error with no overshoot

More information

LARGE-CAPACITY SERIES

LARGE-CAPACITY SERIES AC SERVO DRIVES LARGE-CAPACITY SERIES V to 37 kw 4 V to 55 kw Servomotor SGMVV SERVOPACK SGDV Certified for ISO9 and ISO4 JQA-4 JQA-EM Strongest line-up ever! Newest servo drives increase speeds & improve

More information

Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs. (Analog Voltage Reference) SGDV- EP1. (Pulse Train Reference)

Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs. (Analog Voltage Reference) SGDV- EP1. (Pulse Train Reference) Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs SGDV- ES (Analog Voltage Reference) SGDV- EP (Pulse Train Reference) Model Designations S G D V - 2R9 E S A 002 00 0 vseries SGDV SERVOPACKs

More information

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives AC Servo Drives Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display and

More information

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive AC Servodrive Σ-V Series USER'S MANUAL Design and Maintenance Linear Motor Analog Voltage and Pulse Train Reference SGLGW/SGLFW/SGLTW/SGLCW Servomotors SGDV SERVOPACK Outline Panel Operator Wiring and

More information

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives AC Servo Drives Σ- Series SER'S ANAL Design and aintenance Rotational otor Command Option Attachable Type SGD SEROPACK SGJ/SGA/SGPS/SGG/SGS/SGCS s Outline Panel Display and Operation of Operator iring

More information

DS2 series servo drive

DS2 series servo drive DS2 series servo drive Manual WUXI XINJE ELECTRIC CO., LTD. Data No.: SC209 20110412 1.0 2 Safety notes Confirmation Do not use the drivers that are broken, lack of parts or wrong types. Installation Make

More information

USER'S MANUAL Design and Maintenance

USER'S MANUAL Design and Maintenance AC Servo Drives DC Power Input Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-III Communications Reference SGMMV Servomotor SGDV SERVOPACK Outline SigmaWin+ Wiring and Connection

More information

Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or

Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic,

More information

Build the machine you ve dreamed of, today!

Build the machine you ve dreamed of, today! Build the machine you ve dreamed of, today! AC servo drive Sigma Five You want maximum effect quickly and easily, as does every engineer in the field. And now the series is here with the practical answer

More information

G5 Series Servo System

G5 Series Servo System G5 Series Servo System Extreme mechatronics meets -Stream Automation»» Sub micron precision and ms settling time»» Motion network and safety built-in»» Double registration and full closed loop G5 Series

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 10 10.1 Alarm Displays............................................10-2 10.1.1 List of Alarms...................................................... 10-2 10.1.2 of Alarms............................................

More information

Σ-V Series USER'S MANUAL Setup Rotational Motor

Σ-V Series USER'S MANUAL Setup Rotational Motor AC Servo Drives Σ-V Series USER'S MANUAL Setup Rotational Motor SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors 1 2 3 4 Overview of Setup Installation Wiring and Connection Safety Function

More information

AC SERVO DRIVES JUNMA SERIES D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA

AC SERVO DRIVES JUNMA SERIES D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES Pulse Reference Type Mechatrolink-II Network Type GB D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 9 9.1 Alarm Displays..............................................9-2 9.1.1 List of Alarms........................................................ 9-2 9.1.2 of Alarms..............................................

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-II Communications Reference SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display

More information

Σ-V Series USER'S MANUAL Setup Rotational Motor

Σ-V Series USER'S MANUAL Setup Rotational Motor AC Servo Drives Σ-V Series USER'S MANUAL Setup Rotational Motor SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors 1 2 3 4 1 Overview of Setup Installation Wiring and Connection Safety Function

More information

SGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10

SGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10 Quick Reference Guide SGDH Amplifier $ Document TRM--SGEN 9// V..4 Yaskawa Electric America Technical Training Services Part Number Guide Norman Dr. South Waukegan, IL 685-8-YASKAWA Fax: (847) 887-785

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display and Operation

More information

Installation Servo Drive Dimensions

Installation Servo Drive Dimensions Installation Servo Drive Dimensions A B Model R88D WTA3H WTA5H A 55 160 130 50 8 149 75 5 0.8 4 1.25 WT01H WT02H WT04H A 75 160 130 63 8 149.5 75 5 1.1 8 2 WT08HH A 90 160 180 63 8 149.5 75 5 1.7 11 2

More information

DS2 series 220V servo driver

DS2 series 220V servo driver DS2 series 220V servo driver Fast reference manual Xinje Electronic Co.,Ltd. Serial NO.SC209 20120312 1.0 2 DS2 series 220V servo driver user manual Safety caution Confirmation when receive products DO

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor Analog Voltage and Pulse Train Reference SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Operator

More information

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of

More information

CL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T

CL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T CL86T Closed-loop Stepper 24~80VDC, 8.2A Peak, Closed-loop, No Tuning Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor heating and more

More information

Σ-V Series. USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E. AC Servo Drives. Introduction. Parameter/Monitor Modes

Σ-V Series. USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E. AC Servo Drives. Introduction. Parameter/Monitor Modes AC Servo Drives Σ-V Series USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E Introduction Parameter/Monitor Modes Utility Function Mode Parameter Copy Mode 1 2 3 4 MANUAL NO. SIEP S800000

More information

New Servo Concept: Junma

New Servo Concept: Junma New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter

More information

JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES. Goodwin Electronics: Tel: Web:

JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES. Goodwin Electronics: Tel: Web: AC SERO DRIES JUNMA SERIES PULSE REFERENCE TYPE MECHATROLINK-II NETWORK TYPE EN DE ES FR IT JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver.

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver. JUSP- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 8 8.1 Alarm Displays..............................................8-2 8.1.1 List of Alarms........................................................ 8-2 8.1.2 of Alarms..............................................

More information

EDB series AC servo system

EDB series AC servo system EDB series AC servo system User s Manual V. 2.00 Estun Limited Warranty This manual does not entitle you to any rights. Estun reserves the right to change this manual without prior notice. All rights reserved.

More information

Indexer unit JUSP-NS600. System configuration. Smart and simple positioning solution.

Indexer unit JUSP-NS600. System configuration. Smart and simple positioning solution. Smart and simple positioning solution. No programming languages are required. Connects directly to the drive Allows serial network control and discrete I/O control Servo axis set-up, actuation and monitoring

More information

AC Servo Motor Driver. LECYM Series

AC Servo Motor Driver. LECYM Series Doc. no. LEC-OM06903 (Doc no. JXC -OMT0064) PRODUCT NAME AC Servo Motor Driver MODEL / Series/ Product Number LECYM Series Introduction This manual describes information required for designing, testing,

More information

Σ-V Series. USER'S MANUAL Operation of Digital Operator. AC Servo Drives. Introduction. Parameter/Monitor Modes. Utility Function Mode

Σ-V Series. USER'S MANUAL Operation of Digital Operator. AC Servo Drives. Introduction. Parameter/Monitor Modes. Utility Function Mode AC Servo Drives Σ-V Series USER'S MANUAL Operation of Digital Operator SGDV SERVOPACK Introduction Parameter/Monitor Modes Utility Function Mode Parameter Copy Mode 1 2 3 4 MANUAL NO. SIEP S800000 55A

More information

30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization

30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization 2-phase Hybrid Servo Drive 30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor

More information

SigmaLogic7 Compact Hardware Manual

SigmaLogic7 Compact Hardware Manual SigmaLogic7 Compact Hardware Manual Table of Contents Table of Contents Introduction. SigmaLogic7 Compact Features - - - - - - - - - - - - - - - - -3. SigmaLogic7 Compact Appearance - - - - - - - - -

More information

AV-300i Specifications. Saftronics Inc. PC10 Product Specifications PC10. Mini Vector AC Drive

AV-300i Specifications. Saftronics Inc.  PC10 Product Specifications PC10. Mini Vector AC Drive Saftronics Inc. www.saftronics.com TM AV-300i Specifications PC10 Product Specifications PC10 Mini Vector AC Drive 1 (1) T hree-phas e 230V input Drive Hp 1/8 1/4 1/2 1 2 3 5 7.5 10 Nominal applicable

More information

Copyright 2009 YASKAWA ELECTRIC CORPORATION

Copyright 2009 YASKAWA ELECTRIC CORPORATION AC Servo Drives Σ-V Series USER'S MANUAL EtherCAT (CoE) Network Module Model: SGDV-OCA01A Checking Products Specifications SERVOPACK Installation Wiring and Connection Operation EtherCAT Communication

More information

Driver Specification for Linear Motor Drive Tables

Driver Specification for Linear Motor Drive Tables Driver Specification for Linear Motor Drive Tables 355 35 2 1 3 4 NCR Specification of NCR for NT38V Low-voltage (DC24V) and compact design of 115 x 100 x 33.8 mm. It contributes to miniaturization of

More information

Troubleshooting 12. This section explains the items to check when problems occur, and troubleshooting by the use of error displays or operation state.

Troubleshooting 12. This section explains the items to check when problems occur, and troubleshooting by the use of error displays or operation state. Troubleshooting 12 This section explains the items to check when problems occur, and troubleshooting by the use of error displays or operation state. 12-1 Actions for Problems..........................................

More information

ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)

ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,

More information

Series Servo Drive. ProNet-10 A M A. Rated Power Power voltage Control Style Design Sequence

Series Servo Drive. ProNet-10 A M A. Rated Power Power voltage Control Style Design Sequence ProNet Series Servo Drive Features The response performance has been improved more than three times than EDB series, which realizes online real time inspecting of load inertia, the gain can be adjusted

More information

1S servo drive System configuration

1S servo drive System configuration R88D-1SN@@@-ECT Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring

More information

ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)

ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,

More information

1S servo drive System configuration

1S servo drive System configuration R88D-1SN@@@-ECT 1S servo drive Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance

More information

Personal computer software: CX-One. G-Series ML2 Servo drive. G-Series ML2 Servo drive ADR 1 1 ADR X X1 2 3 X X10 COM

Personal computer software: CX-One. G-Series ML2 Servo drive. G-Series ML2 Servo drive ADR 1 1 ADR X X1 2 3 X X10 COM AC SERVO D RIVER 7 AC SERVO D R IVER 7 AC SERVO D R IVER 7 AC SERVO D RIVER 7 AC SERVO D RIVER 7 RD-N@, RD-T@ -Series servo drive A compact servo drive family for motion control. Compact size and integrated

More information

VFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps.

VFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps. VFD - D700 Series Specifications The latest low-cost variable speed control solution for centrifugal pumps. Built-in PID Control to maintain pressure, flow, measured value, and much more 125% overload

More information

ies-2309 Integrated Easy Servo

ies-2309 Integrated Easy Servo Datasheet of the integrated easy servo motor ies-09 ies-09 Integrated Easy Servo Motor + Drive + Encoder, 0-0VDC, NEMA, 0.9Nm Features Easy servo control technology to combine advantages of open-loop stepper

More information

Integrated Easy Servo

Integrated Easy Servo ies 1706 Integrated Easy Servo Motor + Drive + Encoder, 18 32VDC, NEMA17, 0.6Nm Features Easy servo control technology to combine advantages of open loop stepper systems and brushless servo systems Closed

More information

Sigma-5: the 5-star servo drive

Sigma-5: the 5-star servo drive Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of

More information

DS2 series servo drive

DS2 series servo drive DS2 series servo drive User manual WUXI XINJE ELECTRIC CO., LTD. Serial No. SC2 00 20160526 1.0 All copyrights reserved by WUXI XINJE ELECTRIC CO., LTD. Any copying, transferring or any other usage is

More information

Selecting Servomotor Capacity and Regenerative Capacity

Selecting Servomotor Capacity and Regenerative Capacity Selecting Servomotor Capacity and Regenerative Capacity Servomotor Capacity Selection Examples Use the AC servo drive capacity selection program SigmaJunmaSize+ to select servomotor capacity. The program

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Linear Motor MECHATROLINK-III Communications Reference SGDV SERVOPACK SGLGW/SGLFW/SGLTW/SGLC/SGT Linear Servomotors Outline Panel Display

More information

AC Servo Motor Driver. LECYU Series

AC Servo Motor Driver. LECYU Series Doc. no. LEC-OM07102 PRODUCT NAME AC Servo Motor Driver MODEL / Series/ Product Number LECYU Series Introduction This manual describes information required for designing, testing, adjusting, and maintaining

More information

System configuration. Ratings 400 V Class three-phase 90 to 800 kw 690 V Class three-phase 90 to 1000 kw SX-D. Frequency inverters.

System configuration. Ratings 400 V Class three-phase 90 to 800 kw 690 V Class three-phase 90 to 1000 kw SX-D. Frequency inverters. ~ ~ SX High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards

More information

Sigma-5. The 5-star servo drive.» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements

Sigma-5. The 5-star servo drive.» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of

More information

Specifications of ASDA A2-E_220V Series

Specifications of ASDA A2-E_220V Series Specifications of ASDA A2-E_220V Series Power Supply 100W 200W 400W 750W 1kW 1.5kW 2kW 3kW ASDA A2-E Series 01 02 04 07 10 15 20 30 Phase / Voltage Three-phase / Single-phase 220VAC Three-phase 220VAC

More information

Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK

Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK YASKAWA YASKAWA MANUAL NO. SIE-S800-32.4 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved.

More information

-series. AC Servomotors/Servodrivers Series now includes 1,500-r/min Servomotors. Servodrivers now available with capacities of up to 15 kw.

-series. AC Servomotors/Servodrivers Series now includes 1,500-r/min Servomotors. Servodrivers now available with capacities of up to 15 kw. -series AC Servomotors/Servodrivers Series now includes 1,500-r/min Servomotors. Servodrivers now available with capacities of up to 15 kw. The advanced W Series of Servomotores and Servodrivers are loaded

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver.

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver. JUS- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning

More information

LXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw

LXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw Product data sheet Characteristics LXM32CD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name

More information

USER S MANUAL For Use with Large-Capacity Models Design and Maintenance

USER S MANUAL For Use with Large-Capacity Models Design and Maintenance AC Servo Drives -V Series USER S MANUAL For Use with Large-Capacity Models Design and Maintenance Rotational Motor Command Option Attachable Type SGDV- H, - J SERVOPACK SGDV-COA Converter SGMVV Servomotor

More information

User Manual. Serial No. SC

User Manual. Serial No. SC DS2 Series Servo Driver User Manual Xinje Electronic Co., Ltd. Serial No. SC01 20090706 1.0 DS2 Series Servo Driver User Manual Safety Precautions Content Preface Checking Product and Part Names Installation

More information

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servo Drives. Linear Motor MECHATROLINK-II Communications Reference

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servo Drives. Linear Motor MECHATROLINK-II Communications Reference AC Servo Drives Σ-V Series USER'S MANUAL Design and Maintenance Linear Motor MECHATROLINK-II Communications Reference SGDV SERVOPACK SGLGW/SGLFW/SGLTW/SGLC/SGT Linear Servomotors Outline Panel Display

More information

Servo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:

Servo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description: Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control

More information

MR-J3 Servomotors and Amplifiers

MR-J3 Servomotors and Amplifiers MR-J3 Servomotors and Amplifiers With a capacity range of 5W to 55kW, we reduced the size of both the amplifier and motor, added a high resolution encoder and advanced auto-tuning and vibration control.

More information

PKG-EML10-EDB10-CBLS System Diagram and Specifications

PKG-EML10-EDB10-CBLS System Diagram and Specifications PKG-EML10-EDB10-CBLS System Diagram and Specifications Included Components: EML-10APA22 AC Servo Motor EDB-10AMA Servo Driver BDM-GA16-05 Power Cable BMP-GA24-05 Encoder Cable EDB-BSC-CC24A Comm Cable

More information

RDV-X/RDV-P Robot driver Only for pulse train control

RDV-X/RDV-P Robot driver Only for pulse train control Single axis Robot driver Only for pulse train control As the size is small and weight is light, it is easy to use in automated machinery. Features 1 Dedicated pulse train control The dedicated pulse train

More information

AD Series. AC Servo Drive. For the highest requirements in performance and precision

AD Series. AC Servo Drive. For the highest requirements in performance and precision Range of Performance.1 kw 7 kw (.32 33.4 ) Drastically Reduced Motor Cogging Torque Advanced Drive Technology Autotuning Built-in Programmable Sequence with max. 512 program steps and 1 positions Plug

More information

S11 Adjustable Speed Drive Engineering Specification

S11 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National

More information

Sigma-5 Series DE ES FR. -V Series

Sigma-5 Series DE ES FR. -V Series AC Servo Drives Sigma5 Series EN DE ES FR IT V Series Contents V About YASKAWA V V Se Page 2 About YASKAWA Experience & Innovation Page 3 Sigma5 New ServoDrives Series Page 4 5 Advanced Performance Outstanding

More information

AC SERVo DRiVES -V SerieS EN DE ES FR it -V SerieS -V Serie -V SerieS S -V SerieS -V SerieS

AC SERVo DRiVES -V SerieS EN DE ES FR it -V SerieS -V Serie -V SerieS S -V SerieS -V SerieS AC Servo Drives EN DE ES FR IT V Series Contents V About YASKAWA V V Se Page 2 About YASKAWA Experience & Innovation Page 3 V New ServoDrives Series Page 4 5 Advanced Performance Outstanding Expandability

More information

SX (400 V) System configuration

SX (400 V) System configuration ~ ~ SX (400 V) High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fuses (From 200 kw) Safety according EN13849-1 and EN62061 standards

More information

ES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder)

ES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder) ES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because

More information

SX (400V) System configuration

SX (400V) System configuration ~ ~ SX (400V) High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards

More information

LXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw

LXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw Product data sheet Characteristics LXM32MD18N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 1.8 kw Main Range of product Lexium 32 Product or component type Device short name

More information

General Specifications FECA-TE /2010. Phone: Fax: Web:

General Specifications FECA-TE /2010. Phone: Fax: Web: General Specifications FECA-TE-117 06/2010 1. Standard Specifications 1) Three-phase 230V series Output ratings Input ratings Braking Item Specifications Type (FRN C1S-2U) F12 F25 F50 001 002 003 005 Nominal

More information

AZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter

AZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter HM-6262 Closed Loop Stepping Motor and Driver Package Operation I/O signals Parameter AZ Series Function Edition Method of control via Modbus RTU (RS-485 communication) Method of control via industrial

More information

Bholanath. User s Manual. Precision Engineering Pvt.Ltd. BHSSD Step Servo Driver. Note:-

Bholanath. User s Manual. Precision Engineering Pvt.Ltd. BHSSD Step Servo Driver. Note:- Bholanath Precision Engineering Pvt.Ltd. User s Manual Step Servo - BHSS - 750 W BHSSD Step Servo Driver Note:- Step servo drive & motor are matched pair with BH-75Vac power supply Email : support@bholanath.in

More information

SX (690 V) System configuration

SX (690 V) System configuration SX (690 V) High performance Vector Control IP54 full range Compact design & Robustness Built-in Filter according to C3 Class Built-in Fuses (From 200 kw) Safety according EN13849-1 and EN62061 standards

More information

SV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications

SV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications 24 to 60 VDC input 10 A cont., 20 A peak output current Compact size for multi-axis applications Ideal for OEMs Designed for use with J Series motors Wide range of control options 8 regular digital inputs,

More information

Sigma FSP Amplifier User s Manual

Sigma FSP Amplifier User s Manual Sigma FSP Amplifier User s Manual Copyright 2006 by YEA, Yaskawa Electric America, Inc. FSP Amplifier User s Manual Catalog No.YEA-SIA-FSP-3, Revision 0 December, 2006 All rights reserved. No part of this

More information

Inverter Drive /Vector Drive Motors & Controls

Inverter Drive /Vector Drive Motors & Controls H2 Inverter/ Encoderless Vector Inverter Drive /Vector Drive & Controls 3/4 thru 50 180-264 VAC 3 Phase - 50/60 Hz 3/4 thru 60 340-528 VAC 3 Phase - 50/60 Hz 3/4 thru 60 515-660 VAC 3 Phase - 60 Hz HVAC

More information

DCS810 Brushed DC Servo Drive

DCS810 Brushed DC Servo Drive Datasheet of Brushed DC Servo Drive DCS810 DCS810 Brushed DC Servo Drive 18-80VDC, 0-20A, 20-400W Based on DSP control technology and high smooth servo control algorithm Parameter visible tuning tools,

More information

LXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw

LXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw Product data sheet Characteristics LXM32MU60N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 0.4 kw Main Range of product Lexium 32 Product or component type Device short name

More information

Fan and Pump AC Inverter

Fan and Pump AC Inverter Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings

More information

SD Series. AC Spindle Motor Drives with Power Regeneration, AC Servo Drives. Speed Reference with Analog Voltage Expanded Functions

SD Series. AC Spindle Motor Drives with Power Regeneration, AC Servo Drives. Speed Reference with Analog Voltage Expanded Functions AC Spindle Motor Drives with Power Regeneration, AC Servo Drives SD Series Speed Reference with Analog Voltage Expanded Functions Power Regeneration Converter Model CACP-JU SERVOPACK Model CACR-JU Spindle

More information

DCS Series Brush DC Servo Drive. Datasheet

DCS Series Brush DC Servo Drive. Datasheet DCS Series Brush DC Servo Drive Datasheet Version DCS-2014-01 http://www.primopal.com DCS series Brush DC Servo Drives Description PrimoPal s DCS series Brush DC Servo Drive are fully digital brushed servo

More information

Design Characteristics. FlexDrive II. Series

Design Characteristics. FlexDrive II. Series AC AC DC DC FlexDrive II Series Design Characteristics Brushless AC Servo Baldor s FlexDrive II series are designed to provide reliable and durable operation. Options are available to operate either resolver

More information

UMK M A A. RoHS-Compliant. 2-Phase Stepping Motor and Driver Package. Features. Product Number Code. Product Line

UMK M A A. RoHS-Compliant. 2-Phase Stepping Motor and Driver Package. Features. Product Number Code. Product Line RoHS-Compliant Stepping Motor and Package UMK Series Additional Information Technical reference Page F- The UMK Series is a -phase stepping motor (resolution: per rotation) with easy-handling AC input

More information