BETTER DESIGN BETTER MATERIALS BETTER PROCESSES BETTER MODULES

Transcription

1 BETTER DESIGN BETTER MATERIALS BETTER PROCESSES BETTER MODULES TM

2 FULL RANGE OF CERTIFIED MODULES Mono Crystalline Watt to 50 Watt Poly (Multi) Crystalline Watt to 80 Watt Glass Cells High Efficiency A-Grade Cells from the most reputed makes like Motech, JA, etc. Anti-reflective Coating on Cells. Anisotropically Etched Surface. Low Iron Ultra clear Tempered Glass from leading make like St. Gobain, etc. EVA High Quality EVA of Leading Makes like Bridgestone, etc. Better optical performance. Better Adhesion. Backsheet High Reflectance Backsheet of Leading Makes like Dupont, Krempel. Sealed IP65 with Inbuilt bypass Diodes. Connector Frame Screwless design. Sand Blasted Anodized Aluminum frame with higher tensile strength and better corrosion resistance. Heavy duty 400 kpa/m. With Rain Spouts. High Quality cable with MC type Connector.

3 Very high efficiency modules (Upto 5% module efficiency). Wide range of certified modules from to 80 Watts. Positive oriented power tolerance: 0% on lower side to +3%. Bypass Diodes to ensure power output even in case of shading. Reverse current protection. Plug and play (MC type Connector & cable included). Light weight. FEATURES Higher safety as modules are certified to IEC 6730, Safety Class II 000VDC (also save on cabling costs). All certified components from leading brands. DURABILTY Tests performed: Electric Isolation. Outdoor Exposure. Wet Leakage Current. Thermal Cycling (-40 C to +85 C). Thermal Shock. Humidity Freeze. Damp Heat Test (000H at +85 C, 85%RH). Hot-Spot. Salt Mist Test. UV Exposure. Outdoor Exposure (KWh/m²). Bypass Diode Thermal Test. Mechanical, Wind and Twist Loading. Hail Impact (5mm diameter ice ball at 3 m/s). WARRANTY Long term output warranty shall warrant if PV Module(s) exibits power output of less than 0% of the original minimum rated power specified at the time of sale within 0 years and less than 80% within 5 years after the date of sale to the customer. 5 Years Warranty against any manufacturing defects. 5 years APPLICATIONS Large Solar Farms Roof- Top Grid- Connect Rural Electrification Street Lighting Telecom Cathodic Protection Solar Pumping Railway & Traffic Signaling SMALL MODULES Small Modules also available from 50 Wp onwards up to 30 Wp for off Grid & Rural Application (Suitable for V Configuration). Qualified, IEC 65 : 005 Safety Tested, IEC 6730 ISO 00:000 Plant D V E

4 Poly - Crystalline Silicon Modules Technical Specifications (PCA to PCA0) MODELS Type of Cells PCA PCA PCA PCA Poly (Multi) Crystalline Silicon PCA PCA PCA Wattage (Wp) Volt. at Max. Power (Vmp) Open Circuit Volt. (Voc) Current at Max. Power (Imp) Short Circuit Curr. (ISC) Number of cells per module Dimensions (mm) 34 X 0 34 X 0 34 X 0 48 X 0 48 X 0 48 X X 0 X 40 X 40 X 40 Weight (kg) Technical Specifications (PCA0 to PCA80) MODELS Type of Cells PCA PCA PCA PCA Poly (Multi) Crystalline Silicon PCA PCA PCA Wattage (Wp) Volt. at Max. Power (Vmp) Open Circuit Volt. (Voc) Current at Max. Power (Imp) Short Circuit Curr. (ISC) Number of cells per module Dimensions (mm) 640 X X X 0 50 X 0 50 X 0 50 X 0 50 X 0 Weight (kg) Common Specifications to all Models Frame Front Glass Oper. Temp. ( Deg. C) Relative Humidity Max. System Voltage NOCT Anodized Aluminium Tempered 3. mm -40 to to 00% 000 VDC 46 C +/- C IP 65 Connector MC4 * Temp. Coefficients Current(Isc) : 0.07%/ C ; Voltage(Voc) : %/ C ; Power( Pmax) : %/ C Reverse current protection 5 Amps Application class Class A All Electrical Parameters apply to Standard Test Conditions (STC) : 000W/m², AM.5, 5 C

5 PCA - 48 Cells Modules PCA - 54 Cells Modules Label Bar Code Ø4 Places mm mm 74 8 Places Ø x X0 50 PCA - Cells Modules Label Bar Code 34 Ø4 Places 00mm mm 66 8 Places Ø x X0 40 PCA - 7 Cells Modules Label Label Bar Code Bar Code 640 Ø4 Places Ø4 Places mm mm 00mm mm 80 8 Places Places Ø x X Ø x X0 50 I-V Curve (Cell Characteristics) INTENSITY DEPENDENCE 8.0 Intensity [W/m ] Isc* [ma].0 0. Voc* [mv] *Ratio of Voc(Isc) at reduced intensity to Voc(Isc) at 000 W/m Specifications are subject to change without prior notice.

6 Mono - Crystalline Silicon Modules Technical Specifications (MCA to MCA 0) MODELS MCA MCA 65 MCA 70 MCA 75 MCA 80 MCA 85 MCA 0 Type of Cells Mono Crystalline Silicon Wattage (Wp) Volt. at Max. Power (Vmp) Open Circuit Volt. (Voc) Current at Max. Power (Imp) Short Circuit Curr. (ISC) Size of Cells (mm) Cells per Module Dimensions (mm) Weight (Kg) Diodes Connector 5 X X 808 X bypass MC4 Cable Cross section : 4.0mm² ; Length : 00 mm Technical Specifications (MCA 0 to MCA 50) MODELS MCA 0 MCA 5 MCA 0 MCA 5 MCA 30 MCA MCA 40 MCA 45 MCA 50 Type of Cells Mono Crystalline Silicon Wattage (Wp) Volt. at Max. Power (Vmp) Open Circuit Volt. (Voc) Current at Max. Power (Imp) Short Circuit Curr. (ISC) Size of Cells (mm) Cells per Module Dimensions (mm) Weight (Kg) Diodes X X bypass Connector Cable MC4 Cross section : 4.0mm² ; Length : 00 mm Common Specifications to all Models Frame Anodized Aluminium Front Glass Tempered 3. mm Oper. Temp. ( Deg. C) -40 to +85 Relative Humidity 0 to 00% Max. System Voltage 000 VDC NOCT 45 C +/- C IP 65 Temp. Coefficients Current(Isc) : 0.0%/ C ; Voltage(Voc) : %/ C ; Power( Pmax) : %/ C * Reverse current protection 0 Amps Application class Class A All Electrical Parameters apply to Standard Test Conditions (STC) : 000W/m², AM.5, 5 C

7 Other Details (MCA- to MCA-0) 808± 758± IV curves at various irradiance levels 40± ± Cell Temperature = 5 C 6 000W/m² W/m² 500W/m² 00W/m² 580± - Ø ± 300± ± 00mm mm C 50 C 5 C ± 8- Ø x C -5 C Other Details (MCA-0 to MCA-50) 0± 004± IV curves at various irradiance levels 40± ± Cell Temperature = 5 C W/m² 800W/m² 500W/m² 00W/m² 580± - Ø ± 300± ± 40± 00mm mm 8- Ø x C 5 50 C 4 5 C 3 0 C -5 C IRRADIANCE-AM.5, 000w/m² Specifications are subject to change without prior notice.

8 Accessories Inverters Grid Connect Grid Connect String Inverters Different model upto.5 Kw High Efficiency (upto 7.5%) MPPT technology Standard Protections in-built Inverters Off-Grid Pure Sinewave High Efficiency Available Models with chargers & without chargers Different Models upto 8 Kw MPPT Chargers High Efficiency Upto 8% Available in V / 4 V / 48V Available upto maximum 0 amps TM Distributor / Dealer / Agent Novergy Energy Solution Pvt. Ltd. Navlok Navrartna Comp., Bedla Road, Udaipur- 3300, India Phone : , 45487, Fax sales@novergy.net, info@novergy.co.in