DigiFlex Servo Drive DPQNNIE-015B200
|
|
- Randall Carson
- 5 years ago
- Views:
Transcription
1 Description The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The command source can be generated internally or can be supplied externally. n addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices. Power Range Peak Current 15 A (10.6 A RMS ) Continuous Current 10 A (7.1 A RMS ) Supply Voltage VDC This DP Series drive features a SynqNet interface for networking and a RS-232 interface for drive configuration and setup. Drive commissioning is accomplished using DriveWare, available at All drive and motor parameters are stored in nonvolatile memory. Features Four quadrant regenerative operation Space vector modulation (SVM) technology Fully digital state-of-the-art design Programmable gain settings Fully configurable current, voltage, velocity and position limits PDF velocity loop PD + FF position loop Compact size, high power density MDES F PERATN Current Position Velocity CMMAND SURCE Communication nterface FEEDBACK SUPPRTED Halls ncremental Encoder ±10 V Analog Auxiliary ncremental Encoder NPUTS/UTPUTS 3 Dedicated Digital nputs 2 Dedicated Digital utputs 2 High Speed Captures 1 Programmable Analog nput 2 Programmable Digital nputs (Differential) 2 Programmable Digital nputs (Single-Ended) 2 Programmable Digital utputs (Differential) 2 Programmable Digital utputs (Single-Ended) CMPLANCES & AGENCY APPRVALS RoHS UL/cUL Pending CE Pending Page 1 of 9
2 BLCK DAGRAM USER NPUT 0,1 USR GND NDE DSABLE, LMT+/-, HME SENSCMMN + DFF. NPUT 0,1 DFF. NPUT 0,1 3.75K 3.75K 5k CNTRL MDULE Drive Logic Motor Feedback Motor Feedback 2k HALL A,B,C + HALL A,B,C MT ENC A,B, + MT ENC A,B, UTPUT PULL-UP USER UTPUT 0,1, NDE ALARM, BRAKE USR GND + DFF. UTPUT 0,1 1.7k / nterface / nterface PWER MDULE DFF. UTPUT 0,1 MTR A +ANALG N 20k Power Stage MTR B MTR C ANALG N 20k 20k HGH VLTAGE PA-3 500k PWR GND SGN GND Logic Power LGC PWER RD+ RD TD+ SynqNET nterface TD RS232 RX RS232 TX S GND RS-232 nterface Approvals and Compliances US and Canadian safety compliance with UL 508c, the industrial standard for power conversion electronics. UL registered under file number E Note that machine components compliant with UL are considered UL registered as opposed to UL listed as would be the case for commercial products. Compliant with European CE for both the Class A EMC Directive 89/336/EEC on Electromagnetic Compatibility (specifically EN :2001, EN :2001, EN :2000, and EN :1995/A1:2001) and LVD requirements of directive 73/23/EEC (specifically EN ), a low voltage directive to protect users from electrical shock. RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment. Page 2 of 9
3 SPECFCATNS Power Stage Specifications Description Units Value DC Supply Voltage VDC ver Voltage Limit VDC 198 Under Voltage Limit VDC 35 Peak utput Current A 15 Maximum Continuous utput Current A 10 Maximum Continuous utput Power W 1900 Maximum Power Dissipation at Continuous Current W 95 Minimum Load nductance (Line-To-Line) 1 µh 250 Switching Frequency khz 20 Control Specifications Description Units Value Communication nterfaces - RS-232, SynqNet Command Sources - Communication nterface Feedback Supported - ±10 V Analog, Auxiliary ncremental Encoder, Halls, ncremental Encoder Commutation Methods - Sinusoidal, Trapezoidal Modes of peration - Current, Position, Velocity Motors Supported - Brushed, Brushless, nduction, Voice Coil Hardware Protection Configurable Functions, ver Current, ver Temperature (Drive & Motor), ver Voltage, Short Circuit (Phase-Phase & Phase-Ground), Under Voltage Programmable Digital nputs/utputs (PDs/PDs) - 4/2 Programmable Analog nputs/utputs (PAs/PAs) - 1/0 Current Loop Sample Time μs 50 Velocity Loop Sample Time µs 100 Position Loop Sample Time µs 100 Maximum Encoder Frequency MHz 16 (4 pre-quadrature) Mechanical Specifications Description Units Value Size (H x W x L) mm (in) x 89.5 x 35.9 (5.2 x 3.5 x 1.4) Heatsink (Base) Temperature Range 2 C ( F) 0-65 (32-149) Storage Temperature Range C ( F) ( ) Cooling System - Natural Convection Form Factor - Stand Alone P Rating - P10 AUX CMM Connector - 3-pin, 2.5 mm spaced, enclosed, friction lock header CMMa Connector - Shielded RJ-45 socket with LEDs CMMb Connector - Shielded RJ-45 socket with LEDs FEEDBACK Connector - 15-pin, high-density, female D-sub / Connector - 26-pin, high-density, female D-sub PWER Connector - 6-pin, 3.96 mm spaced, friction lock header Notes 1. Lower inductance is acceptable for bus voltages well below maximum. Use external inductance to meet requirements. 2. Additional cooling and/or heatsink may be required to achieve rated performance. Page 3 of 9
4 PN FUNCTNS AUX CMM - RS232 Communication Connector 1 RS232 RX Receive Line (RS-232) 2 RS232 TX Transmit Line (RS-232) 3 S GND solated Signal Ground GND CMMa - SynqNet Communication Connector 1 RD+ Receiver Line (100BaseT) 2 RD- 3 TD+ Transmitter Line (100BaseT) 4 RESERVED Reserved - 5 RESERVED Reserved - 6 TD- Transmitter Line (100BaseT) 7 RESERVED Reserved - 8 RESERVED Reserved - CMMb - SynqNet Communication Connector 1 TD+ Transmitter Line (100BaseT) 2 TD- 3 RD+ Receiver Line (100BaseT) 4 RESERVED Reserved - 5 RESERVED Reserved - 6 RD- Receiver Line (100BaseT) 7 RESERVED Reserved - 8 RESERVED Reserved - FEEDBACK - Feedback Connector 1 HALL A+ 2 HALL B+ Commutation Sensor nputs 3 HALL C+ 4 MT ENC A+ Differential Encoder A Channel nput (For Single Ended Signals Use nly The Positive 5 MT ENC A- nput) 6 MT ENC B+ Differential Encoder B Channel nput (For Single Ended Signals Use nly The Positive 7 MT ENC B- nput) 8 MT ENC + Differential Encoder ndex nput (For Single Ended Signals Use nly The Positive nput) 9 MT ENC - 10 HALL A- Commutation Sensor nput (For Differential Signals nly) 11 HALL B- Commutation Sensor nput (For Differential Signals nly) 12 SGN GND Signal Ground SGND 13 UT Encoder Supply utput (Short Circuit Protected) 14 RESERVED Reserved - 15 HALL C- Commutation Sensor nput (For Differential Signals nly) Page 4 of 9
5 / - Signal Connector 1 USER UTPUT 0 solated Programmable Digital utput (Referenced To USER GND) 2 USER UTPUT 1 solated Programmable Digital utput (Referenced To USER GND) 3 USR GND Ground Reference For User utputs And nputs SGND 4 NDE ALARM Network Error (solated utput Referenced To USER GND) 5 BRAKE Brake (solated utput Referenced to USER GND) 6 SGN GND Signal Ground SGND 7 + DFF. NPUT 0 Non-solated Differential Digital nput (Programmable Capture Function) 8 - DFF. NPUT 0 9 UTPUT PULL-UP Digital utput Pull-Up 10 NDE DSABLE Node Disable (solated nput Referenced to SENSCMMN) 11 LMT + Positive Limit (solated nput Referenced To SENSCMMN) 12 LMT - Nagative Limit (solated nput Referenced To SENSCMMN) 13 HME Home Switch (solated nput Referenced To SENSCMMN) 14 USER NPUT 0 solated Programmable Digital nput (Referenced To USER GND) 15 USER NPUT 1 solated Programmable Digital nput (Referenced To USER GND) 16 SENSCMMN Sensor Common (Can Be Used To Pull-Up Related nputs) CMN 17 + DFF. NPUT 1 Non-solated Differential Digital nput (Programmable Capture Function) 18 - DFF. NPUT 1 19 SGN GND Signal Ground SGND 20 + DFF. UTPUT 0 Non-solated Differential Digital nput (Programmable Step & Direction r Divide-By-N 21 - DFF. UTPUT 0 Function) 22 + DFF. UTPUT 1 Non-solated Differential Digital nput (Programmable Step & Direction r Divide-By-N 23 - DFF. UTPUT 1 Function) 24 + ANALG N Programmable Differential Analog nput (±10V Range) 25 - ANALG N 26 SGN GND Signal Ground SGND PWER - Power Connector 1 MTR A Motor Phase A 2 MTR B Motor Phase B 3 MTR C Motor Phase C 4 HGH VLTAGE DC Power nput 5 PWR GND Power Ground (Common With Signal Ground) PGND 6 LGC PWR Logic Supply nput Page 5 of 9
6 HARDWARE SETTNGS Switch Functions Switch Description Setting n ff 1 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved. - - Page 6 of 9
7 MECHANCAL NFRMATN AUX CMM - RS232 Communication Connector Connector nformation 3-pin, 2.5 mm spaced, enclosed, friction lock header Mating Connector Phoenix: Plug P/N S GND 2 RS232 TX 1 RS232 RX CMMa - SynqNet Communication Connector Connector nformation Shielded RJ-45 socket with LEDs Mating Connector AMP: Plug P/N A TD- 6 TD+ 3 RD- 2 RD+ 1 CMMb - SynqNet Communication Connector Connector nformation Shielded RJ-45 socket with LEDs Mating Connector AMP: Plug P/N B 1 TD+ 2 TD- 3 RD+ 6 RD- Page 7 of 9
8 Connector nformation Mating Connector FEEDBACK - Feedback Connector 15-pin, high-density, female D-sub AMP: Plug P/N ; Housing P/N ; Terminals P/N (loose) or (strip) MT ENC B+ 6 MT ENC B- 7 MT ENC + 8 MT ENC - 9 HALL A MT ENC A- 4 MT ENC A+ 3 HALL C+ 2 HALL B+ 1 HALL A+ 11 HALL B- 12 SGN GND 13 UT 15 HALL C- Connector nformation Mating Connector / - Signal Connector 26-pin, high-density, female D-sub AMP: Plug P/N ; Housing P/N ; Terminals P/N (loose) or (strip) NDE DSABLE 10 LMT + 11 LMT - 12 HME 13 USER NPUT 0 14 USER NPUT 1 15 SENSCMMN 16 + DFF. NPUT DFF. NPUT UTPUT PULL-UP 8 -DFF. NPUT DFF. NPUT SGN GND BRAKE 4 NDE ALARM 3 USR GND 2 USER UTPUT 1 1 USER UTPUT 0 19 SGN GND 20 + DFF. UTPUT DFF. UTPUT DFF. UTPUT DFF. UTPUT ANALG N 25 -ANALG N 26 SGN GND Connector nformation Mating Connector PWER - Power Connector 6-pin, 3.96 mm spaced, friction lock header AMP: Plug P/N ; Terminals P/N (loose) or (strip) 6 LGC PWR 5 PWR GND 4 HGH VLTAGE 3 MTR C 2 MTR B 1 MTR A Page 8 of 9
9 PART NUMBERNG NFRMATN Example: D P R A N E A Drive Series DP DigiFlex Performance Customer Special Code used to identify customer specials Communication R RS232/RS485 C CANopen or RS232 Q SynqNet Command nputs Analog (±10V) AN No Step & Direction Analog (±10V) AL Low Voltage Step & Direction (5V) Analog (±10V) AH High Voltage Step & Direction (24V) No Analog NL Low Voltage Step & Direction (5V) No Analog, No Step & Direction NN (Communication nterface nly) Digital / solated (24V) T TTL (5V) Non-solated Revision A through Z (letters may be skipped) Max DC Bus Voltage (VDC) Power and Logic Supply AC nput A +24VDC User Logic Supply Required AC nput nly N No Logic Supply Required (nternal Supply) DC nput B Both Logic Supply ptions (nternal or User) DC nput L Logic Supply Required DC nput nly D nternal Logic Supply Motor Feedback E ncremental Encoder and/or Halls R Resolver A Absolute Sin/Cos (Hiperface & Endat) S Sin/Cos with Halls Peak Current (A0 to Peak) DigiFlex Performance series of products are available in many configurations. All models listed on the website are readily available, standard product offerings. ther combinations or possibilities can be made available for EMs with volume requests of 100 or more. Contact Applications Engineering for further information and details. All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document. Page 9 of 9
DigiFlex Servo Drive DPQNNIE-060A400
Description The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and
More informationDigiFlex Performance Servo Drive DPQNNIE-030A800
DigiFlex Performance Servo Drive DPQNNE-030A800 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationAll drive and motor parameters are stored in nonvolatile. Features
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position
More informationDigiFlex Performance Servo Drive DPRAHIR-060A400
DigiFlex Performance Servo Drive DPRAHR-060A400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationServo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ (973) Toll Free: (800) Fax: (973)
Description The digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity,
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DQ111EE40A8BDC
DGFLEX DGTAL SERV DRVES MDEL: DQ111EE40A8BDC WTH NTERFACE FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable
More informationDigiFlex Performance Servo Drive DPCANIA-060A400
DigiFlex Performance Servo Drive DPCANA-060A400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationDigital Servo Motor Driver
SRVODRV-806 Description This digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in
More informationDIGIFLEX DIGITAL SERVO DRIVES MODEL: DQ111EE30A40NAC
DGFLEX DGTAL SERV DRVES MDEL: DQ111EE30A40NAC WTH NTERFACE FEATURES: Fully digital, state-of-the-art design Space Vector Modulation and vector control technology 20kHz Digital current loop with programmable
More informationDigiFlex Performance Servo Drive DPRAHIE-015S400
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors, stepper motors, and AC induction motors. These fully digital drives
More informationDigiFlex Performance Servo Drive DZCANTE-020L080
Description Power Range The DZCANTE-020L080 digital servo drive is designed to drive brushed and brushless servomotors, stepper motors, and AC induction motors from a compact form factor ideal for embedded
More informationAnalog Servo Drive 10A8
Description Power Range The 10A8 PWM servo amplifiers are designed to drive brush type DC motors. The 10A8 is fully protected against over-voltage, over-current, over-heating and short-circuits across
More informationEthernet. DigiFlex Performance Servo Drive DPMANIU-020B080. Click&Move Embedded
DigiFlex Performance Servo Drive DPMANU-020B080 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationDigiFlex Performance Servo Drive DPRANIE-040A400
DigiFlex Performance Servo Drive DPRANE-040A400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationServo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ (973) Toll Free: (800) Fax: (973)
Description The digital servo drive is designed to drive brushed and brushless servomotors from a compact form factor ideal for embedded applications. This fully digital drive operates in torque, velocity,
More informationServo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ (973) Toll Free: (800) Fax: (973)
DPEANU-015S400 Description The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or
More informationDigiFlex Performance Servo Drive DPEANIU-015S400
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position
More informationAnalog Servo Drive B30A40
Description Power Range The B30A40 PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationPeak Current. Continuous Current. See Part Numbering Information on last page of datasheet for additional ordering options.
Description Power Range The PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against
More informationEthernet. DigiFlex Performance Servo Drive DPMANIU-040A400. Click&Move Embedded
DigiFlex Performance Servo Drive DPMANU-040A400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationAnalog Servo Drive BD15A8
Description Power Range The BD15A8 PWM servo drive is designed to drive brushless DC motors at a high switching frequency. t is fully protected against over-voltage, over-current, over-heating and short-circuits.
More informationAnalog Servo Drive B30A40AC
Description Power Range The B30A40AC PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationAxCent Servo Drive AB25A100
Description Power Range The AB25A100 PWM servo drive is designed to drive brushless and brushed DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is
More informationAnalog Servo Drive B60A40AC
Description Power Range The B60A40AC PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationAnalog Servo Drive B25A20
Description Power Range NTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationAnalog Servo Drive. Features
Description Power Range The PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against
More informationDigiFlex Performance Servo Drive DPEANIU-030A800
DigiFlex Performance Servo Drive DPEANU-030A800 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationAxCent Servo Drive AB50A200 Peak Current
Description Power Range The AB50A200 PWM servo drive is designed to drive brushless and brushed type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive
More informationDigiFlex Performance Servo Drive DPEANIU-C100A400
Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors, stepper motors, and AC induction motors. These fully digital drives
More informationPRELIMINARY AVB250A060 PRELIMINARY. Servo Drive. Peak Current (10 seconds)
Description Power Range The servo amplifiers are designed to drive brushless DC motors at a high switching frequency for vehicle applications. t is fully protected against over-voltage, over-current, over-heating,
More informationDigiFlex Performance Servo Drive B100A400AC
Description Power Range The B100A400AC PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED and a single digital output indicate operating status.
More informationAxCent Servo Drive B100A400AC
Description Power Range The B100A400AC PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED and a single digital output indicate operating status.
More informationAnalog Servo Drive. Continuous Current. Features
Description Power Range The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with
More informationAxCent Servo Drive AZBE10A4IC
Description Power Range The AZBE10A4C interface card and PWM servo drive assembly is designed to drive brushless and brushed DC motors at a high switching frequency. The interface card features quick-disconnect
More informationAnalog Servo Drive 25A20DD
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationPeak Current. Continuous Current. See Part Numbering Information on last page of datasheet for additional ordering options.
Description Power Range The PWM servo drive is designed to drive brushless DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected against
More informationAnalog Servo Drive. Peak Current 16 A (11.3 A RMS )
Description The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with a 120-degree
More informationAnalog Servo Drive 30A8
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationAnalog Servo Drive 100A40
Description Power Range The 100A40 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationAnalog Servo Drive 30A8
Description Power Range The 30A8 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationSR30A-AC SERIES BRUSHLESS SERVO AMPLIFIERS Model: SR30A40AC
SR30A-AC Series SR30A-AC SERES BRUSHLESS SERV AMPLFERS Model: SR30A40AC FEATURES: Surface-mount technology Small size, low cost, ease of use ptical isolation, see block diagram DP switch selectable modes:
More informationAnalog Servo Drive 20A20
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationAnalog Servo Drive 30A20AC
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationAxCent Servo Drive A25A100
Description Power Range The A25A100 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationAxCent Servo Drive A50A100
Description Power Range The A50A100 PWM servo drive is designed to drive brushed type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationSERIES 100A SERVO AMPLIFIERS MODELS: 100A25, 100A40
SERES 100A SERV AMPLFERS MDELS: 100A25, 100A40 FEATURES: Surface-mount technology Small size, low cost, ease of use ptical isolation, see block diagram DP switch selectable: current, voltage, velocity,
More informationB15A SERIES BRUSHLESS SERVO AMPLIFIERS Models: B12A6, B15A8, B15A20
B15A SERES BRUSHLESS SERV AMPLFERS Models: B12A6, B15A8, B15A20 FEATURES: Surface-mount technology Small size, low cost, ease of use DP switch selectable: current, open loop, or tachometer velocity mode
More informationSERIES 50A SERVO AMPLIFIERS Models: 30A8, 25A20, 50A8, 50A20
SERES 50A SERV AMPLFERS Models: 30A8, 25A20, 50A8, 50A20 FEATURES: Surface-mount technology Small size, low cost, ease of use ptional input signal isolation for off-the-rectified 120 VAC line operation
More informationM/V Series Servo Drive AB250A060
Description Power Range AB250A060 servo amplifiers are designed to drive brushless DC motors at a high switching frequency. It is fully protected against over-voltage, over-current, over-heating, under-voltage
More informationDigiFlex Performance DPC Drives. CANopen Communication. Hardware Installation Manual ORIGINAL INSTRUCTIONS. Everything s possible.
Everything s possible. DigiFlex Performance DPC Drives CANopen Communication Hardware Installation Manual www.a-m-c.com MNDGDCIN-09 ORIGINAL INSTRUCTIONS Preface ADVANCED Motion Controls constantly strives
More informationDigiFlex Performace DPR Drives. RS485 and Modbus RTU Communication. Hardware Installation Manual ORIGINAL INSTRUCTIONS. Everything s possible.
Everything s possible. DigiFlex Performace DPR Drives RS485 and Modbus RTU Communication Hardware Installation Manual www.a-m-c.com MNDGDRIN-11 ORIGINAL INSTRUCTIONS Preface ADVANCED Motion Controls constantly
More informationDigiFlex Performance DPC Drives. CANopen Communication. Hardware Installation Manual ORIGINAL INSTRUCTIONS. Everything s possible.
Everything s possible. DigiFlex Performance DPC Drives CANopen Communication Hardware Installation Manual www.a-m-c.com MNDGDCIN-10 ORIGINAL INSTRUCTIONS Preface ADVANCED Motion Controls constantly strives
More informationSERIES Z12A PWM SERVO AMPLIFIERS Models: Z6A6, Z12A8 Micro Series
SERIES Z12A PWM SERV AMPLIFIERS Models: Z6A6, Z12A8 Micro Series FEATURES: Micro size, low cost, ease of use Analog +/-10V input commands For brushed motors Torque Mode Closed current loop No pots or switches
More informationS100A40AC SERIES BRUSHLESS SERVO AMPLIFIERS Model: S100A40AC
S100A-AC Series S100A40AC SERIES BRUSHLESS SERVO AMPLIFIERS Model: S100A40AC FEATURES: Surface-mount technology Small size, low cost, ease of use Optical isolation, see block diagram Sinusoidal drive and
More informationLogosol AC/DC Intelligent Servo Drive for Coordinated Control LS-174WP
Features Motors supported: - Panasonic A and S series - Brushless 60/120 commutated - Brush-commutated (DC) motors Up to 20A peak, 12A continuous output current 12 to 90VDC power supply Separate motor
More informationBDC30A SERIES BRUSHLESS SERVO AMPLIFIERS Models: BDC30A8, BDC40A20
BDC30A SERES BRUSHLESS SERVO AMPLFERS Models: BDC30A8, BDC40A20 FEATURES: Surface-mount technology Small size, low cost, ease of use Standard input signal isolation Four quadrant regenerative operation
More informationFC1010 FC10010 FC15030 BFC1010 BFC10010 BFC15030 BFC
Filter Cards for Single Phase Loads: Brushed Motors, Voice Coils, and other Single Phase Loads Filter Cards for Three Phase Loads: Brushless Motors, Linear Motors, and other Three Phase Loads Filter Cards
More informationMMP SA-715A SERVO AMPLIFIER
SERVO AMPLIFIER Description The MMP SA-715A servo amplifier is designed to drive brushed or brushless type DC motors at a high switching frequency. A single red/green LED indicates operating status. The
More informationServo Systems Co. 53 Green Pond Road, Suite #2 Rockaway, NJ (973) Toll Free: (800) Fax: (973)
Description Power Range servo amplifiers are designed to drive brushless DC motors at a high switching frequency for vehicle applications. It is fully protected against overvoltage, over-current, over-heating,
More informationXC4e PWM Digital Drive
PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Amplifiers/Drives Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety
More informationB25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation
B25A20FAC Series B25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation FEATURES: All connections on front of amplifier Surface-mount technology Small size, low cost,
More informationXC4e PWM Digital Drive
XC4e PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety circuit Drive
More informationDigiFlex Performance DPP Drives. POWERLINK / Modbus TCP / Ethernet Communication. Hardware Installation Manual ORIGINAL INSTRUCTIONS
Everything s possible. DigiFlex Performance DPP Drives POWERLINK / Modbus TCP / Ethernet Communication Hardware Installation Manual www.a-m-c.com MNDGDPIN-05 ORIGINAL INSTRUCTIONS Preface ADVANCED Motion
More informationB15A SERIES BRUSHLESS SERVO AMPLIFIERS Models: B12A6, B15A8
B15A SERES BRUSHLESS SERVO AMPLFERS Models: B12A6, B15A8 FEATURES: Surface-mount technology Small size, low cost, ease of use DP switch selectable: current, open loop, or tachometer velocity mode Four
More informationXC4 PWM Digital Drive
XC4 PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety circuit Drive
More informationDigiFlex Performance DPP Drives. POWERLINK / Modbus TCP / Ethernet Communication. Hardware Installation Manual ORIGINAL INSTRUCTIONS
Everything s possible. DigiFlex Performance DPP Drives POWERLINK / Modbus TCP / Ethernet Communication Hardware Installation Manual www.a-m-c.com MNDGDPIN-06 ORIGINAL INSTRUCTIONS Preface ADVANCED Motion
More informationBD30A SERIES BRUSHLESS SERVO AMPLIFIERS Models: BD30A8, BD25A20
Sold by Servo Systems Co. 115 Main Road, P.. Box 97, Montville, NJ 07045-0097 Toll Free: (800) 922-1103 Phone: (973) 335-1007 Fax: (973) 335-1661 www.servosystems.com BD30A SERIES BRUSHLESS SERV AMPLIFIERS
More informationHigh Performance Low Voltage Servo Drives
High Performance Low Voltage Servo Drives Compact CANopen and Sercos III low voltage drives, ideal for driving stepper, brushed and brushless DC motors. A high PWM switching frequency with advanced space-vector
More informationLogosol Intelligent Hall-Servo Drive LS-173U Doc # / Rev. C, 02/12/2008
Features Specially designed for control of brushless motors without encoder Hall-Servo and Encoder-Servo control modes Motors supported: - Brushless 60/120 commutated (AC) - Brush-commutated (DC) Up to
More information3U High, 19" Drive Rack
3U High, 19" Drive Rack 3U plug-in amplifiers Dedicated control card for each amplifier 19 inch rack-mount design Flexible design provides the ability to drive brush, brushless, or stepper motors with
More informationSmall, Low-Voltage Digital Servo Drive
Catalog 8-4/USA Small, Low-Voltage Digital Servo Drive The (Small, Low-Voltage Drive) is a powerful and compact digital servo drive available for use with 24V input providing up to 5 Amps of continuous
More informationDesign Characteristics. FlexDrive II. Series
AC AC DC DC FlexDrive II Series Design Characteristics Brushless AC Servo Baldor s FlexDrive II series are designed to provide reliable and durable operation. Options are available to operate either resolver
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationHarmonica Digital Servo Drive Technical Specifications
Harmonica Digital Servo Drive Technical Specifications March 2004 Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information belonging
More informationASP-X2. Accelus Panel. Control Modes Current (torque, force)
2-AXIS DIGITAL SERVOAMPLIFIER for BRUSHLESS/BRUSH MOTORS Control Modes Current (torque, force) Opto-Isolated Command Interface (per channel) ±0V Current control input Enable input Buffered encoder outputs
More informationipos4808 BX-CAT DATASHEET P/N: P E221
All dimensions are in mm; Drawing not to scale. Motor sensor configurations Motor PMSM BLDC DC BRUSH ST Sensor (2-ph) ncr. Encoder ncr. Encoder + Hall Analog Sin/Cos encoder SS BiSS-C* Linear Halls** Tacho
More informationLCC-10 Product manual
LCC-10 Product manual Rev 1.0 Jan 2011 LCC-10 Product manual Copyright and trademarks Copyright 2010 INGENIA-CAT, S.L. / SMAC Corporation Scope This document applies to i116 motion controller in its hardware
More informationSoloist. Position Controller and Servo Amplifier PWM. Single axis digital servo controller with integral power supply and amplifier
Soloist Position Controller and Servo Amplifier PWM Single axis digital servo controller with integral power supply and amplifier Advanced software architecture shortens customer development time; use
More informationMTS Automation P R O D U C T S P E C I F I C A T I O N. MaxPlus Digital Servo Drive. MP-FLX 230 Series. MP-FLX 230 Series. Single- and Dual-Axis
P R O D U C T S P E C I F I C A T I O N MaxPlus Digital Servo Drive MP-FL 230 Series MP-FL 230 Series Single- and Dual-Axis At two times the standard industry speed for digital current loop update rates,
More informationNdrive Series. Digital Servo Amplifiers PWM. Wide output power range from 10 A peak to 200 A peak at 320 VDC. 2- or 3-phase AC line input or DC input
Ndrive PWM Amplifiers/Drives Ndrive Series Digital Servo Amplifiers PWM Wide output power range from 10 A peak to 200 A peak at 320 VDC 2- or 3-phase AC line input or DC input CE approved and NRTL safety
More informationGold Our Best Ever Motion Solutions
Elmo's Line Our Best Ever Motion Solutions The Trombone An Ultra-Compact 400 VDC & 800 VDC "Direct to Mains" Networking Servo Drive Up to 7 kw of Qualitative Power Motion Control Solutions Made Small,
More informationDDM3U-1-100V-15A-NP DDM3U-4-60V DDM3U-1-320V-15A-NP
MC4U PWM Drives Drives 100V-15A-NP DDM3U-4-60V 320V-15A-NP Up to 4 Universal Drives per Card, 60V, 5A peak, 0.3kW One Axis universal Drive per Card, 100V and 320V, 30A peak, 8.2kW DDM3U-4-320V-1A DDM3U-4-320V-2A
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationSilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.
SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,
More informationCompact, Low-Cost Solutions
Catalog 8-4/USA 77 & 77X Compact, Low-Cost Solutions The Making of a Servo System Servo systems rely on feedback devices to continuously correct for errors in current or torque, velocity, and position.
More informationIRT Mini Evo. Technical Manual. quality IN MOTION. quality IN MOTION
IRT quality IN MOTION www.irtsa.com 2000 Mini Evo Technical Manual IRT quality IN MOTION Contents 1. INTRODUCTION 3 2. DESCRIPTION 5 3. TECHNICAL DATA 7 3.1 GENERAL DATA FOR ALL TYPES 7 3.2 SPECIFIC DATA
More informationNdrive Series. Digital Servo Amplifiers PWM. Wide output power range from 10 A peak to 200 A peak at 320 VDC. 2- or 3-phase AC line input or DC input
Ndrive PWM Amplifiers/Drives Ndrive Series Digital Servo Amplifiers PWM Wide output power range from 10 A peak to 200 A peak at 320 VDC 2- or 3-phase AC line input or DC input CE approved and NRTL safety
More informationEnsemble HPe/CP/MP. Networked, Panel-Mount Drives PWM. Network drives through a high-speed serial interface to coordinate up to ten axes of motion
Ensemble PWM Motion Controllers Ensemble HPe/CP/MP Networked, Panel-Mount Drives PWM Network drives through a high-speed serial interface to coordinate up to ten axes of motion Coordinate motion using
More informationServo Drives SPECIFICATIONS Model DA-XDA DA-XDA DA-XDA Continuous Current 4 A peak / 2.8 A RMS 8 A peak / 5.6 A RMS 16 A peak
Allied Motion s new xdrive servo drives are precision, all-digital DSPbased servo drive amplifiers capable of supplying up to 16 A peak continuous, 32 A peak current at up to 230 VAC. The xdrive is designed
More informationThe Gold Duo Highly Compact Dual Axis Networking Servo Drive Up to 1.6 kw (3.2 kw Peak) of Qualitative Power Per Drive
Elmo's Line Our Best Ever Motion Solutions The Duo Highly Compact Dual Axis Networking Servo Drive Up to 1.6 kw (3.2 kw Peak) of Qualitative Power Per Drive Motion Control Solutions Made Small, Smart &
More informationBrushless Servo Motor Drives xdrive Series
Brushless Servo Motor Drives xdrive Series All-Digital, AC-Input, Velocity or Torque Control Allied Motion s xdrive servo drives are precision, all-digital DSP-based servo drive amplifiers capable of supplying
More informationServo Amplifier PMA 90 / 180
Features Motors supported: - Brushless DC 60 /120 commutated - Brushed DC - Printed Armature DC 18 to 180VDC single power supply Up to 20A peak / 12A continuous current Selectable modes of operation: -
More informationCD1-k Installation Guide. XtrapulsCD1-k Installation Guide. CANopen drive
CD-k Installation Guide XtrapulsCD-k Installation Guide CANopen drive Xtrapuls CD-k- Installation guide WARNING This is a general manual describing a series of servo drives having output capability suitable
More informationDigital Servo Drives
Digital Servo Drives & Motion Controllers Technical Data www.motiontech.com.au 1 of 24 2 of 24 Table of Contents A) For general purpose, industrial applications: Features 4 Tweeter, 7.5~95VDC, 2.5~3.3A
More informationVariateur analogique courant continu série AZ et AZB
Variateur analogique courant continu série AZ et AZB AZ Analog Drives for servo systems - AMC Advanced Motion Control www.rosier.fr 07/11/2011 page(s) 1-7 Products and System Requirements / Analog PWM
More informationmaxon document number:
maxon document number: 791272-04 1 Table of contents... 2 2 Table of figures... 3 3 Introduction... 4 4 How to use this guide... 4 5 Safety Instructions... 5 6 Performance Data... 6 6.1 Motor data... 6
More informationDXM 300W-1200W X-RAY GENERATOR MODULE REV. AB
PAGE 1 OF 5 Compact & Lightweight Models from 20kV-160kV, 300W, 600W and 1200W Universal Input, Power Factor Corrected Hot Anode or Hot Cathode X-Ray Tube Capable Standard Digital Interfaces:, Ethernet
More information30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization
2-phase Hybrid Servo Drive 30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor
More information7I33/7I33T MANUAL Quad analog servo amp interface
7I33/7I33T MANUAL Quad analog servo amp interface V1.4 This page intentionally almost blank Table of Contents GENERAL.......................................................... 1 DESCRIPTION.................................................
More informationLogosol AC/DC Servo Amplifier LS-58P Doc # / Rev D, 07/17/2008
Doc #713058001 / Rev D, 07/17/2008 Features Motors supported: - Panasonic A or S series - Brushless 60 /120 commutated - Brush motors 18 to 180VDC single power supply Up to 20A peak / 12A continuous current
More information