1 310 nm FOR 156 Mb/s, 622 Mb/s, 1.25 Gb/s, FTTH InGaAsP MQW-FP LASER DIODE

Transcription

1 DESCRIPTION LASER DIODE 0 nm FOR 56 Mb/s, 6 Mb/s,.5 Gb/s, FTTH InGaAsP MQW-FP LASER DIODE The is a 0 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-. These devices are designed for application up to.5 Gb/s. APPLICATIONS STM- (I-, S-.), STM- (I-, S-.), ITU-T recommendations FTTH PP (Fiber To The Home Point to Point) system FEATURES Optical output power Po = 5.0 mw Low threshold current lth = 6 ma Differential efficiency ηd = 0. W/A Wide operating temperature range TC = 0 to +85 C InGaAs monitor PIN- CAN package φ 5.6 mm Fiber coupling point 5.8 mm Document No. PL056EJ0V0DS (nd edition) Date Published July 006 NS CP(K) The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the F file and specifying it in the "Find what:" field.

2 <R> PACKAGE DIMENSIONS (UNIT: mm).90±0. 5.0±.0.±0. 0 ± (0.) *.0 φ ( φ.) * ( φ.55) * φ.5 φ.0.0±0. (0.) * Focal Point 5.80 typ φ 0.5 * ( ) indicates nominal dimension. x = ±00 µ m y = ±00 µ m Reference Plane NX50EH PIN CONNECTIONS (Case) BOTTOM VIEW NX50EK (Case) Data Sheet PL056EJ0V0DS

3 ORDERING INFORMATION Part Number Package Pin Connections NX50EH-AZ* NX50EK-AZ* -pin CAN with ball lens cap Remark The hermetic test will be performed as AQL.0%. *NOTE: Please refer to the last page of this data sheet, Compliance with EU Directives for Pb-Free RoHS Compliance Information. Data Sheet PL056EJ0V0DS

4 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit Optical Output Power Po 0 mw Forward Current of IF 50 ma Reverse Voltage of VR.0 V Forward Current of IF 0 ma Reverse Voltage of VR 0 V Operating Case Temperature TC 0 to +85 C Storage Temperature Tstg 0 to +85 C Assembly Temperature Tasb 50 (5 Hr) C Lead Soldering Temperature Tsld 50 ( sec.) C Relative Humidity (noncondensing) RH 85 % ELECTRO-OPTICAL CHARACTERISTICS (TC = 5 C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Operating Voltage Vop Po = 5.0 mw..5 V Operating Current Iop Po = 5.0 mw ma Threshold Current Ith 6 5 ma Differential Efficiency ηd W/A Center Wavelength λc Po = 5.0 mw, RMS ( 0 db) nm Spectral Width σ Po = 5.0 mw, RMS ( 0 db).0.0 nm Rise Time tr 0-90% ns Fall Time tf 90-0% ns Lateral Beam Angle θ// Po = 5.0 mw deg. Vertical Beam Angle θ Po = 5.0 mw deg. Monitor Current Im VR =.5 V, Po = 5.0 mw µa Monitor Dark Current ID VR = 0 V 00 na Monitor Terminal Capacitance Ct VR = 0 V, f = MHz 0 pf Focal Distance Df Po = 5.0 mw mm Optical Output Power from Fiber Pf Po = 5.0 mw, 8 degree angled fiber, Optimized X, Y, θ. Z = 5.8 ± 0.05 mm. Data Sheet PL056EJ0V0DS µw

5 <R> TYPICAL CHARACTERISTICS (TC = 0 to +85 C, unless otherwise specified) Center Wavelength λc (nm) Optical Output Power Po (mw) OPTICAL OUTPUT POWER vs. FORWARD CURRENT TC = 0 C +5 C Forward Current IF (ma) +85 C TEMPERATURE DEPENDENCE OF CENTER WAVELENGTH Case Temperature TC ( C) Remark The graphs indicate nominal characteristics. 50 Operating Current Iop (ma), Threshold Current Ith (ma) OPERATING CURRENT AND THRESHO CURRENT vs. CASE TEMPERATURE Case Temperature TC ( C) Iop Ith Data Sheet PL056EJ0V0DS 5

6 <R> TYPICAL CHARACTERISTICS (TC = 5 C, unless otherwise specified) Forward Current IF (ma) Relative Intensity FORWARD CURRENT vs. FORWARD VOLTAGE Forward Voltage VF (V) SPECTRUM Wavelength λ (nm) Remark The graphs indicate nominal characteristics. Optical Output Power Po (mw) Optical Output Power from Fiber Pf (mw) Data Sheet PL056EJ0V0DS Pf OPTICAL OUTPUT POWER vs. MONITOR CURRENT SMF Monitor Current Im ( µ A) TOLERANCE OF FIBER COUPLING DISTANCE (Z) Z Po = 5.0 mw Z-Axis Tolerance Z (mm) 6

7 Subject: Compliance with EU Directives 590 Patrick Henry Drive Santa Clara, CA Telephone: (08) Facsimile: (08) CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 00/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 00//EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Concentration Limit per RoHS (values are not yet fixed) < 000 PPM Concentration contained in CEL devices -A -AZ Not Detected (*) Mercury < 000 PPM Not Detected Cadmium < 00 PPM Not Detected Hexavalent Chromium < 000 PPM Not Detected PBB < 000 PPM Not Detected PBDE < 000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.