R&S MNT100 RF Interference Locator Specifications

Size: px

Start display at page:

Download "R&S MNT100 RF Interference Locator Specifications"

Hugo Long
5 years ago
Views:

1 R&S MNT100 RF Interference Locator Specifications Data Sheet Version 02.00

2 CONTENTS Specifications... 3 RF data... 3 Noise figure, DANL... 3 Phase noise... 3 Sensitivity (demodulation path) with ITU-T filter... 3 Immunity to interference, nonlinearity... 4 IF data... 4 Polychrome IF panorama... 4 Probability of intercept (100 % POI)... 4 Occupied bandwidth measurement... 4 Control... 5 Signal processing... 5 Scan modes... 5 Measurement accuracy and display modes... 5 DF mode... 5 Interfaces... 6 Data rates via LAN/SD card... 6 Standards... 6 General data... 7 R&S HE400 handheld directional antenna... 8 R&S ADD207 compact UHF/SHF DF antenna Rohde & Schwarz R&S MNT100 RF Interference Locator

3 Specifications RF data Frequency range 600 MHz to 6 GHz RF input Input level for linear operation 600 MHz to 3.5 GHz (attenuator on) 0 dbm, typ. 107 dbµv 3.5 GHz to 6 GHz 24 dbm, typ. 83 dbµv Impedance 50 Ω VSWR 600 MHz to 6 GHz < 2.5 (nom.) Input attenuation 600 MHz to 3.5 GHz typ. 10 db, 25 db (eff.) (can be switched manually) Preselection 600 MHz to 1.5 GHz tuned bandpass filters 1.5 GHz to 7.5 GHz highpass/lowpass filter combination Noise figure, DANL Noise figure (demodulation path) 600 MHz (attenuator off) 12 db, typ. 10 db 1.1 GHz (attenuator off) 12 db, typ. 10 db 1.5 GHz (attenuator off) 10.0 db, typ. 8 db 3.4 GHz (attenuator off) 16 db, typ. 12 db 3.6 GHz 20 db, typ. 15 db 5.5 GHz 20 db, typ. 16 db 6 GHz 20 db, typ. 16 db DANL (spectral path) (10 khz IF bandwidth, normalized to 1 Hz RBW, averaged over 1 s, Blackman window) Phase noise 600 MHz (attenuator off) 51 dbµv (1 Hz)/ 158 dbm (1 Hz) 1.1 GHz (attenuator off) 51 dbµv (1 Hz)/ 158 dbm (1 Hz) 1.5 GHz (attenuator off) 53 dbµv (1 Hz)/ 160 dbm (1 Hz) 3.4 GHz (attenuator off) 49 dbµv (1 Hz)/ 156 dbm (1 Hz) 3.6 GHz 45 dbµv (1 Hz)/ 152 dbm (1 Hz) 5.5 GHz 43 dbµv (1 Hz)/ 150 dbm (1 Hz) 6 GHz 43 dbµv (1 Hz)/ 150 dbm (1 Hz) f c = 600 MHz offset 10 khz 90 dbc (1 Hz), typ. 95 dbc (1 Hz) offset 100 khz 98 dbc (1 Hz), typ. 105 dbc (1 Hz) f c = 3400 MHz offset 10 khz 84 dbc (1 Hz), typ. 89 dbc (1 Hz) offset 100 khz 95 dbc (1 Hz), typ. 100 dbc (1 Hz) Sensitivity (demodulation path) with ITU-T filter AM/6 khz bandwidth/12 db SINAD (f mod = 1 khz/m = 0.5) FM/15 khz bandwidth/20 db SINAD (9 khz bandwidth at f 30 MHz) (f mod = 1 khz/deviation = 5 khz (deviation = 2.4 khz at f 30 MHz)) 600 MHz to 1.4 GHz 3 dbµv, typ. 8 dbµv 1.5 GHz to 3.4 GHz 1 dbµv, typ. 5 dbµv 3.6 GHz to 6 GHz 5 dbµv, typ. 2 dbµv 600 MHz to 1.4 GHz 4 dbµv, typ. 10 dbµv 1.5 GHz to 3.4 GHz 0 dbµv, typ. 6 dbµv 3.6 GHz to 6 GHz 5 dbµv, typ. 2 dbµv Rohde & Schwarz R&S MNT100 RF Interference Locator 3

4 Immunity to interference, nonlinearity Third-order intercept (TOI) (input) at 300 khz test signal offset Test level 35 dbm 600 MHz to 2.6 GHz (attenuator off) 11.5 dbm, typ. -7 dbm Test level 35 dbm 2.6 GHz to 3.5 GHz (attenuator off) 8 dbm, typ. 5 dbm Test level 10 dbm 600 MHz to 3.5 GHz (attenuator on) 15 dbm, typ. 20 dbm Test level 30 dbm 3.5 GHz to 6 GHz 8 dbm, typ. 3 dbm Second-order intercept (SOI) (input) at 300 khz test signal offset 600 MHz to 1.5 GHz (attenuator off) typ. 35 dbm 1.5 GHz to 3.5 GHz (attenuator off) typ. 40 dbm 3.5 GHz to 6 GHz typ. 30 dbm Image frequency rejection IF MHz to 3.5 GHz 85 db, typ. 95 db 3.5 GHz to 6 GHz 70 db, typ. 85 db Image frequency rejection IF 3 55 db, typ. 65 db IF rejection 600 MHz to 3.5 GHz 55 db, typ. 90 db 3.5 GHz to 6 GHz 45 db, typ. 50 db Oscillator reradiation 600 MHz to 3.5 GHz 20 dbµv, typ. 10 dbµv 3.5 GHz to 4.0 GHz 40 dbµv, typ. 20 dbµv 4.0 GHz to 6 GHz 20 dbµv, typ. 10 dbµv Inherent spurious response 600 MHz to 3.5 GHz 8 dbµv, typ. 6 dbµv (50 Ω termination at antenna socket, operating mode = PScan, RBW = 125 Hz, measurement time = 100 ms, RF spectrum = AVG) 3.5 GHz to 6 GHz 18 dbµv, typ. 7 dbµv IF data IF spectrum display range Display modes IF demodulation bandwidths 16 filters (specified values indicate 3 db bandwidth) 1 khz to 10 MHz, 1/2/5/10/20/50/100/200/500 khz, 1/2/5/10 MHz normal (clear/write), average, max. hold, min. hold 150/300/600 Hz, 1.5/2.4/6/9/12/15/30/50/120/150/250/300/ 500 khz Demodulation modes all demodulation bandwidths AM, FM, pulse, I/Q, PM demodulation bandwidth 9 khz USB, LSB, CW demodulation bandwidth 15 khz ISB Polychrome IF panorama Minimum signal duration for 100 % probability of intercept (POI) with full amplitude accuracy for 10 MHz span Realtime spectrum trace display modes Bitmap update rate per second 2 Probability of intercept (100 % POI) Probability of intercept (operating mode: FFM, IF spectrum = max. hold, measurement time = 1 s, center frequency = 1 GHz) Occupied bandwidth measurement down to 60 us pulse level pulse duration typ. 37 dbm typ. 20 ns typ. 45 dbm typ. 30 ns typ. 50 dbm typ. 80 ns typ. 61 dbm typ. 190 ns typ. 71 dbm typ. 660 ns typ. 82 dbm typ. 3.2 µs typ. 92 dbm typ. 10 µs normal (clear/write), average, max. hold, min. hold Bandwidth measurement bandwidth range (full span) up to 10 MHz x db method 0 db to 100 db, resolution 0.1 db ß % method 0.1 % to 99.9 %, resolution 0.1 % 4 Rohde & Schwarz R&S MNT100 RF Interference Locator

5 Control Squelch in 1 db steps 30 dbµv to 110 dbµv Gain control AGC 30 dbµv to 110 dbµv MGC 30 dbµv to 110 dbµv Frequency control AFC ±½ IF bandwidth (150 Hz to 500 khz) Signal processing FFT (fast Fourier transform) IF spectrum and panorama scan spectrum up to 2048 points Blackman window, max. 20 data sets/s via display (IF spectrum and PScan spectrum), max. 200 data sets/s via LAN (PScan spectrum), max. 20 data sets/s via LAN (IF spectrum) Scan modes Frequency scan (FScan) start and stop frequency, step width user-selectable scan speed up to 200 channels/s Memory scan (MScan) memory locations 1024, user-programmable scan speed up to 150 channels/s Panorama scan (PScan) start and stop frequency user-selectable resolution bandwidths (bin widths) 125/250/500/625 Hz, 1.25/2.5/3.125/6.25/12.5/25/50/100 khz scan speed (RBW = 100 khz, measurement time = 500 µs, RF spectrum = normal, clear/write, display mode = RF spectrum) up to 2 GHz/s Measurement accuracy and display modes Frequency resolution 1 Hz Frequency accuracy across specified operating temperature ±1 ppm range aging ±1 ppm/year Signal level 0.1 db resolution 30 dbµv to 107 dbµv, 137 dbm to 0 dbm Level accuracy 600 MHz to 6 GHz operating temperature range max. ±3 db, typ. ±1.5 db +20 C to +30 C max. ±1.5 db, typ. ±1.0 db Level display modes (detectors) average, RMS, max. peak, sample A/D converter 14 bit DF mode Frequency range 600 MHz to 6 GHz Instrument DF accuracy 0.5 RMS Minimum signal duration for single burst signal 10 ms Minimum burst duration for multiple burst signals typ. 0.5 ms Display resolution adjustable 0.1 or 1 Step depends on set bandwidth 625 mhz, 1.25/2.5/3.125/6.25/12.5/25/31.25/50/ 62.5/100/125/200/250/312.5/500/625 Hz, 1/1.25/2/2.5/3.125/5/6.25/8.33/10/12.5/20/ 25/50/100/200/500 khz, 1 MHz Operating mode fixed frequency mode FFM DF frequency scan up to 200 channels/s DF memory scan up to 150 channels/s Averaging modes continuous, normal, gate DF modulation types all Supported DF antennas R&S ADD207 Rohde & Schwarz R&S MNT100 RF Interference Locator 5

6 Interfaces Antenna input 600 MHz to 6 GHz N socket, 50 Ω Max. level nondestructive +20 dbm, 0 V DC Reference input 10 MHz BNC socket, typ. 500 Ω Max. level nondestructive 0.1 V to 3 V (V pp), max. 10 V DC IF output for signals from 600 MHz to 6 GHz, 21.4 MHz, BNC socket, 50 Ω uncontrolled Audio output Digital bandwidth 12.5 khz LAN Analog internal speaker Data and control interfaces remote control and data transfer LAN (Ethernet 10/100BASE-T), USB 1.1 read and write to SD card 4 Gbyte, class 6 (standard), size 32 Gbyte remote command set SCPI protocol via LAN Screenshots file format png Languages Chinese, English, French, German, Czech, Portuguese, Russian, Spanish R&S ADD207 and R&S HE400 antenna control interface 7-pin connector, female (type Binder 712) Data rates via LAN/SD card IF spectra typ Mbit/s Audio 8 khz, 8 bit, mono typ Mbit/s 32 khz, 16 bit, stereo typ Mbit/s PScan spectra RBW = 100 khz typ. 1.3 Mbit/s RBW = khz typ Mbit/s Standards EMC electrical safety IEC , EN UL (3rd edition) CSA-C22.2 No EMI, EMS RED No. 2014/53/EU Article 3 EN /-22 EN , EN EN 55022, class B (valid for LAN cable lengths < 3 m) Mechanical stress vibration (sinusoidal, random), shock MIL-PRF-28800F Environmental stress operating altitude, humidity, etc. MIL-PRF-28800F (noncondensing) Operating altitude battery operation max m (15000 ft) Protection class electrical 2 mechanical, with R&S HA-Z222 carrying holster and rain cap IP54 6 Rohde & Schwarz R&S MNT100 RF Interference Locator

7 General data Operating temperature range with battery (operating mode: discharge) 10 C to +55 C with battery (operating mode: charge) 0 C to +45 C with external power supply unit 0 C to +40 C Permissible temperature range with battery (operating mode: discharge) 10 C to +55 C (without condensation) Storage temperature range 20 C to +70 C Power supply AC, with external power supply unit 100 V to 240 V AC, 50/60 Hz, 700 ma DC 15 V DC ± 10 %, 2 A Power consumption 15 W typ. (with fully charged battery); additional typ. 10 W with battery charging Battery (lithium-ion, 6 cells), R&S HA-Z206 operating time in DF mode approx. 2 h in receive mode (with receive antenna) approx. 4 h charging time approx. 4 h (instrument switched off) Dimensions W H D approx. 192 mm 320 mm 62 mm (7.56 in in 2.44 in) Weight including battery approx. 3.5 kg (7.72 lb) Rohde & Schwarz R&S MNT100 RF Interference Locator 7

8 R&S HE400 handheld directional antenna Frequency range of antenna modules log-periodic antenna module 450 MHz to 8 GHz cellular antenna module 700 MHz to 2500 MHz (R&S HE400CEL, option) Polarization adjustable, linear vertical or horizontal VSWR < 3.5, typ. 2.0 Impedance 50 Ω Connectors antenna handle RF output QMA female control and supply USB 2.0 micro AB socket Connectors at R&S MNT100 cable set RF output N male control and supply 7 pin male Power supply 5 V DC ± 0.5 V (max. 500 ma) Dimensions antenna handle with LP antenna module, L H D approx. 600 mm mm (23.6 in 11.2 in 2.4 in) Weight antenna handle with LP antenna module approx. 1.0 kg (2.2 lb) 8 Rohde & Schwarz R&S MNT100 RF Interference Locator

9 R&S ADD207 compact UHF/SHF DF antenna Frequency range 600 MHz to 6 GHz Antenna type 2 two stacked 8-element circular arrays DF method correlative interferometer Polarization vertical VSWR < 1.8 System DF accuracy 1, 2 in reflection-free environment, typ. 1.5 RMS with R&S ADD207 DF sensitivity (with R&S ADD207, see diagram below for 5 RMS, 600 Hz, 5 s) Power supply from DF equipment Dimensions Ø H approx m 0.27 m (13 in in) Weight approx. 6 kg (13.23 lb) Permissible wind speed DF antenna mounted on vehicle roof with 130 km/h R&S ADD17XZ3 Operating temperature range 40 C to +65 C, in line with EN , EN , MIL-PRF-28800F, class 2 Storage temperature range 40 C to +85 C Humidity 95 %, +25 C/+55 C, in line with EN Vibration sinusoidal 5 Hz to 55 Hz, 0.15 mm amplitude constant, 55 Hz to 150 Hz, 0.5 g const., in line with EN random (mobile application on a vehicle) in line with MIL-STD-810G, meth C a Protection rating IP55, in line with EN Resistance to salty fog in line with MIL-STD-810F meth DF sensitivity with R&S ADD207 1 Measurement in reflection-free environment. The RMS error is calculated from the bearings of evenly distributed samples versus azimuth and frequency in line with ITU-R SM Reduced system DF accuracy and DF sensitivity below 640 MHz. Rohde & Schwarz R&S MNT100 RF Interference Locator 9

10 10 Rohde & Schwarz R&S MNT100 RF Interference Locator

11 Rohde & Schwarz R&S MNT100 RF Interference Locator 11

12 Service that adds value Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing. Founded more than 80 years ago, the independent company which is headquartered in Munich, Germany, has an extensive sales and service network with locations in more than 70 countries. Mobile network testing The company s broad and diverse product portfolio for mobile network testing addresses every test scenario in the network lifecycle from base station installation to network acceptance and network benchmarking, from optimization and troubleshooting to interference hunting and spectrum analysis, from IP application awareness to QoS and QoE of voice, data, video and app-based services. Sustainable product design Environmental compatibility and eco-footprint Energy efficiency and low emissions Longevity and optimized total cost of ownership Certified Quality Management ISO 9001 Certified Environmental Management ISO Regional contact Europe, Africa, Middle East customersupport@rohde-schwarz.com North America TEST RSA ( ) customer.support@rsa.rohde-schwarz.com Latin America customersupport.la@rohde-schwarz.com Asia Pacific customersupport.asia@rohde-schwarz.com China customersupport.china@rohde-schwarz.com R&S is a registered trademark of Rohde & Schwarz GmbH & Co. KG Trade names are trademarks of the owners PD Version December 2017 (as) R&S MNT100 RF Interference Locator Data without tolerance limits is not binding Subject to change 2017 Rohde & Schwarz GmbH & Co. KG Munich, Germany PDP 1 en

R&S EB500 Monitoring Receiver Specifications

Radiomonitoring & Radiolocation Data Sheet 01.02 R&S EB500 Monitoring Receiver Specifications CONTENTS Definitions... 3 Specifications... 4 Frequency...4 Linearity...4 Interference rejection...4 Noise