Remote Training Collar

Size: px

Start display at page:

Download "Remote Training Collar"

Jordan Thompson
5 years ago
Views:

1 Remote Training Collar operating and training guide For 1 Dog p-collar 320 For 2 Dogs p-collar 320B PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING B-320-TEX-011(1)

2 Important Safety Information Not for use with aggressive dogs. Do not use this Product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certiﬁed trainer. Safety during on-leash training. It is vitally important that you and your dog remain safe while learning during on-leash training. Your dog should be on a strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong enough to restrain your dog when he tries to chase. Risk of skin damage. Please read and follow the instructions in this manual. Proper ﬁt of the collar is important. A collar worn for too long or made too tight on the pet s neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores. Avoid leaving the collar on the dog for more than 12 hours per day. When possible reposition the collar on the pet s neck every 1 to 2 hours. Check the ﬁt to prevent excessive pressure; follow the instructions in this manual. Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts. When using a separate collar for a lead, don t put pressure on the electronic collar. 3

3 Wash the dog s neck area and the contacts of the collar weekly with a damp cloth. If a rash or sore is found, discontinue use of the collar until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian. These steps will help keep your pet safe and comfortable. Millions of pets are comfortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may ﬁnd after some time that your pet is very tolerant of the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed. 4 Table of Contents Components... Other Items Yo u May Need... Main Features... Overview Operating Guide... 9 How to turn the p-collar 320 on/off... 9 How the transmitter buttons work Collar fitting How to find the best Vibration/Shock level To maximize the distance The LCD & LED indicator Charging the unit How to pair the Transmitter and Receiver Collar How to use the Test Light Gerneral Training Tips Frequently Asked Questions Troubleshooting Warranty and Repair Informatiion Reference Size for Difference Dogs Reference Weight for Dogs

4 Main Features Vibration, Tone and Shock Dog 1 Receiver Collar Dog 2 Receiver Collar 8 Adjustable Intensity Levels for Vibration and 16 Adjustable Intensity Levels for Shock 100% Waterproof Receiver Collar Test Light For 1 Dog p-collar hour Rapid Charging Lithium Polymer Battery For 2 Dogs p-collar 320B Battery Charger 300M Remote Training Range for Transmitter User Expandable to a Two-dog System for Receiver Collar USB Port Touch Distinguishing Mode Buttons Wrist Strap Other Items You May Need Backlit LCD Display Shows Intensity Level, Battery and Dog 1/2 Ÿ Screwdriver Ÿ Scissors Ÿ Lighter 6 7

5 Overview Operating Guide Antenna LED Indicator Light White Backlit LCD Display Intensity Level Adjustment Action Buttons Blind Operation Identification Point Easily distinguish and send the correct training command without eyes on by touching and feeling on buttons with different structure. Selecting Channels Step How to turn the p-collar 320 on/off 1 To turn the Transmitter on 1. Press any of to active the Transmitter. The backlight on. 2. Backlight will stay for about 30 seconds. if no operation then, backlight off. 3. LCD display will stay for about 5 minutes. if no operation then, LCD display shuts off. To turn the Receiver Collar on Press once, the green light on and will flash every 5 seconds under working mode. To turn the Receiver Collar off 1. Press and hold the On/Off Button until the Red LED light shuts off.(this takes approximately three seconds.) Wrist Strap Pin 2. Release the On/Off Button. Transmitter Note: To extend the life of the batteries, turn the Receiver Collar off when it is not in use. Contact Points Charging Jack (with cover) On/Off Button Receiver Collar 8 9

6 Step How the Transmitter buttons work 2 Dog 1/2 Button 1. Press 1/2 once to switch between Dog 1 and Dog Press and hold 1/2 until the Vibration digit Press + - to adjust Vibration Level from Press and hold 1/2 until the Shock digit Press + - to adjust Shock Level from flashes. flashes. Up Button Down Button VIBRA TONE SHOCK Dog 1/2 Button 1. Press once to send a vibration, tone, shock command to Receiver Collar. 2. Press and hold, Receiver Collar will have a continuous vibration/shock, and stop after 10 seconds. Note: Do not suggest to press and hold for long time to avoid physical or psychological hurt to the dog

7 Step Collar fitting 3 The Receiver/Collar should be fitted so that the surgical stainless steel contact points press firmly against the dog s skin. When properly fitted, you should be able to fit a finger or two snugly in between the collar and Step How to find the best Vibration/Shock Level 4 The unit comes with Up and Down buttons to control the Vibration/Shock Level, with Level 1 being the lowest level for Both Vibration and Shock, Level 8 you dog s skin. When properly fitted, the Receiver/Collar being the highest for Vibration and Level 16 being should not move on the dog. The best location for the highest for Shock. the Receiver/Collar box is either side of the dog s The level of Vibration/Shock best suited for your dog windpipe. depends on your dog s temperament and threshold A loose fit can allow the Receiver/Collar to move for Vibration/Shock. Always start at the lowest level around on the dog s neck. When this happens, the contact points may rub the skin and cause irritation. and work your way up. The appropriate level can be found when the dog If the Receiver/Collar is too tight, the dogs may have responds to the Vibration/Shock with a mild reaction, difficulty breathing. such as a tensing of the neck muscles. The Vibration /Shock Level may vary depending on the training situation. When highly distracted, dogs will require a higher level of Vibration/Shock

8 Step To maximize the distance Step The LCD & LED indicator 5 6 The unit has a 300 meter range. The range may vary depending on the way the Transmitter is held. Hold the Transmitter away from your body to receive the greatest range. For maximum signal strength, keep the device properly charged. Indicates Vibration levels ranging from 1-8, and appears in the right upper part. Indicates Shock levels ranging from 1-16, and appears in the right lower part. Indicates the active dog receiver and appear in the left part. Indicates battery s power level. Note: The battery indicator will flash every second to indicate low battery. Transmitter LED Indicator Light Function and Response Button Button Function Transmitter Indicator Light Response Delivers audible tone to collar Red LED on for length of button press Maximum range Typical range Minimum range *Avoid touching the antenna or the range may decrease substantially. Delivers vibration to collar base on current level shown on Digital Display (vibration will time-out if pressed continuously for 10 seconds and will reset after release the VIBRA button) Red LED on for length of button press Delivers shock to collar base on current level shown on Digital Display (shock will Red LED on for time-out if pressed continuously for 10 seconds length of button press and will reset after release the SHOCK button) 14 15

Receiver Indicator Light Function and Response Receiver Collar Function Green LED Response Power on Flashes once Normal operation - Good battery 1 ﬂash every 5 seconds Training tone On length of TONE

Function Power off Red LED Response On for 3 seconds Normal operation - Low battery Flashes rapidlly Vibration/Shock On length of VIBRA/SHOCK button press On length of charging within 2-3 hours

The indicator light on the Transmitter or Receiver comes on momentarily when any of the Mode Buttons is pushed.

Plug the charger into a standard wall outlet. 2. Lift the rubber covers protecting the Transmitter/Receiver Collar Charging Jack. 3.

9 Receiver Indicator Light Function and Response Receiver Collar Function Green LED Response Power on Flashes once Normal operation - Good battery 1 ﬂash every 5 seconds Training tone On length of TONE button press In pairing position Flashes once every second within 15 seconds Pairing Complete Charging Complete Flashes rapidly for five times On length of the charger connected Receiver Collar Function Power off Red LED Response On for 3 seconds Normal operation - Low battery Flashes rapidlly Vibration/Shock On length of VIBRA/SHOCK button press On length of charging within 2-3 hours Charging Step Charging the unit 7 The indicator light on the Transmitter or Receiver will not come on. The indicator light on the Transmitter or Receiver comes on momentarily when any of the Mode Buttons is pushed. Battery Charging Procedure NOTE: The unit has a partial charge when it leaves our facility, upon receipt of the collar, be sure to give it a 4-hour initial charge before the first use. 1. Plug the charger into a standard wall outlet. 2. Lift the rubber covers protecting the Transmitter/Receiver Collar Charging Jack. 3. Connect the charger connectors to the Transmitter and Receiver Collar Charging Jack, and as shown below. 4. Connect the USB port to the Charging Adapter. 5. Charge the unit for 4 hours for the first charge. Recharges take only 2-3 hours. Note: The Battery Indicator on the Transmitter will scroll and the indicator light in steady red while charging; and the Battery Indicator will become steady, and the LED Indicator Light flashes when fully charged. The indicator light on the Receiver Collar will be in steady red while charging and green light turned on when fully charged. 6. When charging is completed, remove the charger connector. The unit uses Lithium-Polymer batteries. 1. Charge the unit before using the unit for the first time. 2. Do not charge the unit near any flammable substances. 3. Fully charge if the unit is to be stored without use for a period of 3 months or more. Recharge the unit if: The indicator light on the collar is emitting a red color and flashes rapidly. The 3 bar indicator on the Transmitter LCD shows just 1 bar

Step How to pair the Remote Transmitter & Receiver Collar 8 If your Receiver Collar does not beep when the TONE Button of the Remote Transmitter is pushed,or if you feel the Receiver Collar is not

10 Step How to pair the Remote Transmitter & Receiver Collar 8 If your Receiver Collar does not beep when the TONE Button of the Remote Transmitter is pushed,or if you feel the Receiver Collar is not responding to the Remote Transmitter, follow these steps to pair: 1. With the Receiver Collar off your pet, turn the Receiver Collar off. Restart, press and hold the On/Off Button until the Green LED flashes every second on the Receiver Collar. This continues for 16 seconds, within which pairing should be completed. 2. Press and hold the TONE, VIBRA or Shock Button of the Remote Transmitter until the Green LED Light on the Receiver Collar flashes rapidly for 5 times, indicating pairing is completed. Step How to use the Test Light 9 1. Turn the Receiver Collar on. 2. Hold the Test Light Contacts to the Contact Points. 3. Press the SHOCK Button on the Remote Transmitter. 4. The Test Light will flash. Note: At higher Shock Levels, the Test Light will flash brighter. 5. Turn the Receiver Collar off. Save the Test Light for future testing. Note: If the Test Light does not flash, recharge the Receiver and re-test. If Test Light still does not flash, contact us for Customer Service. Two Dog System NOTE: If you wish to add another Receiver Collar to the training system, extra Receiver Collars are available where you bought your unit. Remote Transmitter 1. Switch Dog1 to Dog2 by pressing and releasing the Dog 1/2 Button. 2. Turn on the Receiver Collar for Dog 2, press any Mode Buttons to verify function. 3. If Dog 2 Receiver Collar does not respond. Pairing may be needed.repeat steps in How to pair the Remote Transmitter & Receiver Collar above

11 Training Guide General Tips Eliminate one misbehavior or teach one obedience command at a time. If you move too fast with training, your pet may become confused. Be consistent. Correct your pet every time he misbehaves. Unless you can supervise him, it is recommended that you restrict your pet from situations in which he has a history of misbehaving. However, setting up a situation as a training session can dramatically improve your chances of success. If your pet reacts to the tones by hiding or acting fearful, redirect his attention to a simple and appropriate behavior, such as the sit command. Pets should be at least 6 months old before using the Training Collar. Only let responsible family members use the Training Collar. It is not a toy! Other pets in hearing range will be aﬀected by the training tones. Therefore, training sessions should be conducted out of hearing range of other pets. Never use the Remote Training Collar to correct or eliminate any form of aggressive behavior. We recommend you contact your local veterinarian or professional trainer to determine if your pet might be aggressive. See page 3 for more information. 20 Frequently Asked Questions Is the Vibration/Shock safe for my pet? While the Vibration/Shock is unpleasant, it is harmless to your pet. Electronic training devices require interaction and training from the owner to achieve desired results. How old does my pet have to be before using the Remote Training Collar? Your pet should be able to recognize basic obedience commands such as Sit or Stay. Pets should be at least 6 months old before using the Training Collar. Once my pet is trained and has been obeying Probably not. You may need to my commands, will he reinforce training with the Receiver have to continue to Collar from time to time. wear the Receiver Collar? Is the Receiver Collar waterproof? Yes. Will I get exactly 300 meters of range with the Remote Training Collar? The range of the Remote Training will vary according to terrain,weather, vegetation, as well as transmission from other radio devices. See To maximize the distance for tips on maximizing your range. How long can I continuously deliver Vibration/ Shock to my pet? The maximum amount of time you can press the Vibration/Shock Button and delivervibration/shock to your pet continuously is 10 seconds. After this, Vibration/Shock cannot be delivered until You release and press the button again. 21

12 Troubleshooting Make sure the Receiver Collar has been turned on. If your range has reduced from the ﬁrst time you used the Remote Training Collar, the battery(s) may be low in either the Remote Transmitter or Receiver Collar. Terrain, weather, vegetation, transmission from other radio devices My pet does not and many other factors can impact the respond when I amount of range you have with the unit. press a button. Test the Receiver Collar. See How to use the Test Light for details. Increase the Vibration/Shock Level.Refer to How to ﬁnd the best Vibration/Shock Level for more information. Make sure the Receiver Collar s Contact Points are placed snugly against your pet s skin. Refer to Collar ﬁtting for more information. Make sure the Receiver Collar has The Receiver Collar will not turn on. The Receiver Collar is not responding to the Remote Transmitter. 22 been charged. For the initial charge, be sure to charge it for 4 hours. Subsequent charges only take 2-3 hours. Verify the Receiver Collar is on. If the Indicator Light does not come on when any button is pressed on the Transmitter, ensure that the batteries are fully charged. If the ﬁrst two solutions did not resolve your problem, see How to pair the Remote Transmitter & the Receiver Collar. Warranty and repair information 1-Year Limited Lifetime Warranty The original purchaser for this unit is provided with 1-YEAR WARRANTY. The warranty begins from the date of purchase. For the first year, coverage is for both Parts and Labor on warranty repair services. Accessories such as chargers, splitter cables, antennas, straps, and batteries are covered for the first year only. After the first year, the Limited Lifetime Warranty covers Parts only and does not cover Labor Fees and Accessories. All shipping fees incurred, the cost of Accessories after the first year, and Labor fees associated with out of warranty repair work, are the customer s responsibility. Labor fees wil be variable depending on the extent of the work required. The Limited Lifetime Warranty expires 5 years after a model is discontinued from production. To Qualify for the Warranty All products must provided a proof of purchase is required to initiate repair work under warranty. We strongly recommend keeping the original receipt. If a proof of purchase is not available at the time of service, we will estimate the age of unit by the serial number. Serial number estimates can differ from the actual purchase date. A serial number estimate is the only method of determining an apporoximate date of purchase without a proof of purchase. Not Covered Under Warranty We DO NOT offer warranty for products that have been bought secondhand or as a resold product.we DO NOT 23

13 replace defective units or provide refunds for products purchased from us after 30 days from the date of purchase. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be addressed to the dealer directly. If the products purchased from an authorized dealer are after 30 days from the date of purchase, please send the units to us for service and repair.we DO NOT cover the cost of repairs and replacements due to misuse by the owner or dog, improper maintenance, and/or lost units. Any water damage on the Water Resistant Transmitters and the Water Resistant Receivers of our product series will not be covered. All replacement costs for either the transmitter or receiver will be the owner s responsibility. The warranty is void if the unit has been altered or an unauthorized person has damaged the unit while attempting repair work. Battery replacement by the customer during the first year of the Limited Lifetime Warranty is not recommended. If the customer chooses to replace the batteries, any damage to the unit during the change-out by the owner will void the warranty.we reserve the right to retain and discard any parts or accessories that have been found damaged upon replacement and repair. Procedure for Repair Work If the unit is malfunctioning, please refer to the Troubleshooting Guide in the Operating and Training Guide before sending it back for Service. The cost of shipping products under warranty back is the customer s responsibility. We are not responsible for units damaged or lost in transition. We are not responsible for loss of training time or inconvenience while the unit is in for repair work. We do not provide loaner units or any form of 24 compensation during the repair period. A copy of the sales receipt showing the purchase date may be required before warranty work is initiated.please include a brief explanation outlining the problem and include your name, address, city/state/zip code, daytime phone number, evening phone number, and address. Compliance FCC - USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Modiﬁcation or changes to this equipment not expressly approved by Patpet Technology Co., Ltd may void the user s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a speciﬁc installation. If interference does occur to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. 25

14 Connect the equipment to an outlet on a circuit diﬀerent from that to which the receiver is connected. Consult customer care, the dealer, or an experienced radio/ TV technician for help. Reference Size for Different Dogs (in) (in) (in) Chihuahua, YorkshireTerrier Chihuahua, YorkshireTerrier Poodle,Pomeranian Maltese Dog, Shih Tzu Schnauzer,English Cocker Spaniel Golden Retriever, Old English Sheepdog Large Dog(Body height above 24 inch, Weight above 88 lbs) Medium Dog(Height inch, Weight lbs) Small Dog(Height inch, Weight lbs) Mini Dog(Height under 10 inch, Weight under 8.8 lbs) 26 27

By Dogtra Remote Controlled Dog Training Collars. Owner's Manual. Please read this manual thoroughly before operating the Dogtra EDGE training collar.

By Dogtra Remote Controlled Dog Training Collars Owner's Manual Please read this manual thoroughly before operating the Dogtra EDGE training collar. Product Safety and Health Statement Intended Use They