Counters Totalising counters, predetermining counters and totalising timers

Transcription

1 General << Back Counters Totalising counters, predetermining counters and totalising timers Introduction The XBK counters associated with detection products (photo- detectors, inductive sensors, limit switches) or dialogue products (pushbuttons, selector switches, etc) can be used to provide a complementary function of the control system : counting. Functions XBK counters complement the Magelis range of display units and operator dialogue terminals by offering simple display and entry functions. They are fully compatible with labelled Telemecanique detection and man-machine dialogue products. Technology The offer is divided between two technologies : electromechanics and electronics. Electromechanics is used for slow counting applications, of around several tens of hertz, whereas electronics is adapted to counting frequencies of around a kilohertz. These two technologies can be subdivided into three distinct product families : - totalising counters, - predetermining counters, - totalising timers. These three families offer products with varying characteristics : - display capacity, - type and number of outputs, - types of input, - reset to zero option, - adding, subtracting, bidirectional or programmable counting mode, - display in hundredths of an hour (hour counters). This enables the products to be more application-specific. pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ 505 Ver.00-EN.fm/

2 General Counters Totalising counters, predetermining counters and totalising timers Applications Totalising counters These are used for counting events from al pulses or contacts. The value is displayed and updated in increments on each new pulse. Application : counting the number of parts In automatic mode : the totalising counter performs this operation in conjunction with a photo- detector, inductive sensor or limit switch, which detects the passing of a part and translates this by adding one unit to the number of parts counted by the totalising counter. In manual mode : the totalising counters performs this operation in conjunction with a pushbutton. A press on the button adds one more unit to the value displayed. This system can be used with a ticket distributor or a manual assembly station. Predetermining counters These are used for counting events from al pulses or contacts. The value is displayed and updated in increments or decrements on each new pulse. They can be used to enter a preset value manually. When this predefined value is reached, they send an al signal. Predetermining counters can be adding or subtracting. Signals Limit switch Supply Applications : upcounting or downcounting the number of parts. The predetermining counter counts the number of parts in the same way as a totaliser. When the selected value is reached, the preset counter, in conjunction with the various sensors, sends a signal to trigger actions, such as stopping a machine or conveyor belt. Stop belt Totalising timers These are used to count and display the time, with a precision of a hundredth of an hour. Applications : they can be used to measure the duration of an action or of the use of a machine. Oven pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ 505 Ver.00-EN.fm/

3 Compatibility Counters Totalising counters, predetermining counters and totalising timers Electromechanical technology Totalising counter XBK-T5, XBK-T7 XBK-T6, XBK-T8 XBK-T6 compact Type Input Input Input Input Input Input Supply voltage Ã$ V Ã" 5 V $ V Ã$ V Ã" 5 V Ã$ V Current consumption 70 ma ma ma 0 ma ma 6 ma Power.5 W.5 VA.5 W.5 W.75 VA 0.55 W Inductive proximity sensors/ () -wire photo- detectors Inductive proximity sensors/ () () -wire photo- detectors Photo- detectors, relay output Limit switches/ Pressure switches (volt-free contact) Pushbutton controls (volt-free contact) PLCs: relay outputs PLCs: solid state outputs ELM Contactors/Relays (up to 8 A) PLCs : inputs Pilot lights Predetermining counter Totalising timer XBK-P5 XBK-H7 Type Input Output Reset Input Input Input Supply voltage $ VCC 7 0 V $ V " V " 5 V " 0 V Current consumption 0 ma A max 0.5 A ma 5 ma ma Power.5 W 0 VA max W 0.08 VA 0.56 VA VA Inductive proximity sensors/ () -wire photo- detectors Inductive proximity sensors/ () () () () -wire photo- detectors Photo- detectors, relay output Limit switches/ Pressure switches (volt-free contact) Pushbutton controls (volt-free contact) PLCs: relay outputs PLCs: solid state outputs () ELM Contactors/Relays (up to 8 A) PLCs: inputs Pilot lights TEGO (Reference of plate) () Possible if volt drop <. V (otherwise, boost the supply) () Incompatible with sensors or photocells with protection against overloads < 0 ma () Possible if output current > 0.5 A () Possible with a kω (.5 W) resistor, fitted in parallel APD-AD APD-AD APD-AD APD-AD APD-AD APD-AD Possible combination Combination not possible or not applicable General : pages 505/ and 505/ pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ 5056_Ver.0-EN.fm/

4 Compatibility Counters Totalising counters, predetermining counters and totalising timers Electronic technology Totalising counter Predetermning counter totalising timer XBK-T8, XBK-H8 XBK-P6 Type Input Reset to Inputs Relay output Solid state output Sensor zero supply Supply voltage Ã$ V Ã" 0 V Ã" 5 V or Ã" 0 V Voltage State "" State "0" State "" Ã7 5 V min Ã$ - V Ã$ -0 V Ã$ -0 V > $ 5 V < $ 0.7 V > $ 8 V Ã$ 0 V max State "0" State "0" Ã" 50 V max < $ 0.7 V < $ V Resistance 50 kω Current 0 ma max 0 ma min 0 ma max 0 ma max 50 ma max A max Inductive proximity sensors/ (7) -wire photo- detectors Inductive proximity sensors/ () () () (7) -wire photo- detectors Photo- detectors, relay output () () (7) Limit switches/ () () Pressure switches (volt-free contact) Pushbutton controls (volt-free contact) () () PLCs: relay outputs () () PLCs: solid state outputs () ELM Contactors/Relays () () (up to 8 A) PLCs: Inputs (5) (6) (6) Pilot lights TEGO APD-AD APD-AD APD-AD (Reference of plate) APD-AD APD-AD APD-AD () Possible with a 680 Ω resistor fitted in parallel () It is preferable to use contacts designed for low currents () Possible with a 0 kω resistor fitted in parallel () Possible if leakage current at state "0" < 0.5 ma (5) Possible if input current > 0 ma (6) Possible if input current < 0 ma (7) Possible if current consumption < 50 ma APD-AD APD-AD APD-AD APD-AD APD-AD APD-AD APD-AD APD-AD Possible combination Combination not possible or not applicable General : pages 505/ and 505/ pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ 5056_Ver.0-EN.fm/

5 Characteristics Counters Totalising counters, predetermining counters and totalising timers Type of device XBK-T totalising counters XBK-H totalising timer Type of display mechanical LCD mechanical LCD Environment Conforming to standards EN 5008-, EN EN 5008-, EN EN 5008-, EN 5008-, EN EN 600 EN 5008-, VDE 05 EN 600 UL, CSA (pending) Product certifications except XBK-T60000U00M UL, C-UL (pending) UL, CSA (pending) UL, C-UL (pending) Temperature Operation C except XBK-T60000U00M : Storage C except XBK-T60000U00M : Degree of protection IP 0 except IP 5 IP 65 IP 5 according to IEC 59 XBK-T60000U00M : IP 65 Vibration resistance 5 gn (0 to 50 Hz) gn (0 to 50 Hz) gn (0 to 50 Hz) gn (0 to 50 Hz) according to IEC Shock resistance 0 gn (6 ms) 0 gn (8 ms) 0 gn ( ms) 0 gn (8 ms) according to IEC Protection against shocks Class II according to IEC 56 Mounting and fixing Flush-mounting element Flush-mounting unit fixed Flush-mounting unit fixed by a self-locking by a clamp clamp Connection By AMP lugs on a On screw terminal block cable connector Characteristics Supply voltage V c ± 0 % Battery a ± 0 % 50 Hz Battery c ± 0 % a 5 ± 0 % 50 Hz a 5 ± 0 % a 0 ± 0 % 50 Hz Consumption W/VA XBK-T50000U0M, XBK-T M : 0.56 XBK-T50000U08M and XBK-T M : XBK-T70000U00M :.5 XBK-T M : 0.08 XBK-T50000UM :.5 XBK-T60000U0M and XBK-T80000U00M :.5 XBK-T60000UM :.75 XBK-T60000U00M : 0.55 Counting frequency Hz 0, 0, Backup capacity Permanent 7 years Permanent 7 years Number of digits 5, 6, 7 or Precision of display h h Character height mm Counting mode Adding Adding Adding /00 of an hour (Input resistance : 50 kω) Reset to zero With or without With Without With Type of reset to zero Manual Manual with Manual with locking locking Inputs Function Count Enable Type Contact Transistor : PNP 8 V Contact Transistor : PNP 8 V or NPN 0.7 V or NPN 0.7 V Amplitude V ± 0 V max ± 0 V max Mechanical life 0 million pulses except XBK-T60000U0M and T80000U00M : 00 million Minimum length of pulse ms 5 at 0 Hz, 0.07 at 7.5 khz General : pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ Compatibility : pages 5056/ and 5056/ 505 Ver.00-EN.fm/

6 Characteristics Counters Totalising counters, predetermining counters and totalising timers Type of device XBK-P5 XBK-P6 Type of display Mechanical LED or LCD Environment Conforming to standards EN and EN 5008-, EN 600 Product certifications XBK-P5pppDppM : CSA (pending) XBK-P5pppUppM : UL/CSA (pending) UL, C-UL (pending) Temperature Operation C Storage C Degree of protection according to IEC 59 IP 0 IP 65 Vibration resistance 5 gn (0 to 50 Hz) gn (0 to 50 Hz) according to IEC according to IEC Shock resistance 0 gn (6 ms) 0 gn (8 ms) according to IEC according to IEC Protection against Class II according to IEC 56 shocks Mounting and fixing Removable, flush-mounting element Flush-mounting unit with fixing by self-locking clamp Fixing by screws on the front plate using needle screws Characteristics Supply voltage V c ± 0 % c or a 0 ± 0 % or a 5 ± 0 % Sensor supply voltage V None c to (50 ma max) for XBK-P6pp0GE or XBK-P6pp0GE Consumption.5 W 50 ma c V, 50 ma a 0 or a 5 V Counting frequency Hz (500 on bi-directional counting) Number of digits 5 6 Display capacity Character height mm 7.6 (LED) or 9 (LCD) Number of presets or Display of the preset Adding (continuous) Non continuous or subtracting (non continuous) Counting mode Adding or subtracting 5 programmable modes : - single counter input, - single counter with phase discriminator, - differential inputs, - summing inputs, - counting direction input. (Counter input resistance 5 kω) Reset Adding from zero modes : reset to zero and reset to the preset value Subtracting from the preset value Type of reset Manual or manual and Manual, and automatic Type of input signals Contact (0 VA/0 V/ A max) Transistor : PNP 8 V or NPN V Amplitude ± 0 V max Type of outputs Contact (volt-free) Changeover relay (response time 5 ms) : c 5 V < Uc < c 0 V a 5 V < Uc < a 50 V 0 ma < I < A PNP transistor : at V, 0 ma max Connection By AMP lugs on a cable connector On screw terminal block Minimum length of ms 7 at 0 Hz counting pulse 0. at 5 khz General : pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ Compatibility : pages 5056/ and 5056/ 505 Ver.00-EN.fm/

7 References Counters Totalising counters, predetermining counters and totalising timers Totalising counters With mechanical display Supply Number Counting Type of Reference Weight voltage of display frequency reset to zero digits V Hz kg $ 5 0 Manual XBK-T50000U0M None XBK-T60000U00M 0.00 XBK-T50000U//M 5 Manual XBK-T60000U0M None XBK-T70000U00M 0.00 XBK-T60000U00M 8 5 None XBK-T80000U00M 0.50 $ 5 0 None XBK-T50000U08M 0.00 " Manual XBK-T50000UM 0.00 XBK-T60000U/M 6 0 Manual XBK-T60000UM 0.00 With LCD display Supply Number Counting Type of Reference Weight voltage of display frequency reset to zero digits V khz kg XBK-T70000U00M Battery Manual XBK-T800UE with locking Totalising timers XBK-T80000U00M With mechanical display (max. display capacity : h) Supply Number Supply Type of Reference Weight voltage of display frequency reset to zero digits V Hz kg " 7 50 None XBK-H M XBK-T800UE " None XBK-H M " None XBK-H M XBK-H /M XBK-H80000E With LCD display (max. display capacity : h) Supply Number Display Type of Reference Weight voltage of display mode reset to zero digits V kg Battery 8 /00 of an hour Manual XBK-H80000E with locking General : pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ Compatibility : pages 5056/ and 5056/ 505_Ver.0-EN.fm/

8 References Counters Totalising counters, predetermining counters and totalising timers Subtracting predetermining counters with mechanical display Supply Number Counting Number Type Reference Weight voltage of display frequency of of digits presets reset V Hz kg $ 5 5 Manual XBK-P5000D0M 0.00 Manual and XBK-P5000D0M 0.0 Adding predetermining counters with mechanical display XBK-P5000D/0M $ 5 5 Manual XBK-P5000U0M 0.00 Manual and XBK-P5000U0M 0.0 Predetermining counters with LCD display Supply Number Counting Number Type Reference Weight voltage of display frequency of of digits presets reset V khz kg XBK-P5000U/0M $ 6 5 Manual, XBK-P60G0E 0.50 and automatic Manual, XBK-P60G0E 0.50 and automatic " Manual, XBK-P60GE 0.50 and automatic XBK-P6/0G/E XBK-P6/0G/E Manual, XBK-P60GE 0.50 and automatic " Manual, XBK-P60GE 0.50 and automatic Predetermining counters with LED display Manual, XBK-P60GE 0.50 and automatic Supply Number Counting Number Type Reference Weight voltage of display frequency of of digits presets reset V khz kg $ 6 5 Manual, XBK-P60G0E 0.50 and automatic Manual, XBK-P60G0E 0.50 and automatic " Manual, XBK-P60GE 0.50 and automatic Manual, XBK-P60GE 0.50 and automatic General : pages 505/ and 505/ pages 505/ and 505/ pages 5055/ and 5055/ Compatibility : pages 5056/ and 5056/ 505_Ver.0-EN.fm/

9 Dimensions Counters Totalising counters, predetermining counters and totalising timers XBK-T50000U//M Flush-mounting XBK-T60000U00M Flush-mounting XBK-T70000U00M e e, 6, 75,5 8,5 7,7, , e : panel thickness, mm < e <.5 mm. XBK-T60000U/M XBK-T80000U00M Flush-mounting (common) = = 0, e 0, 5 0, ,5 XBK-H /M Flush-mounting XBK-T800UE Flush-mounting XBK-H80000E e 5 5,5 6,5 e : panel thickness, < mm. XBK-P5000D/0M 5 0 e : panel thickness, < mm. XBK-P50000U/0M 88, ,5 0, 0, Flush-mounting (common) XBK-P6//0G/E Flush-mounting 60 e = 55 = 55 9,5 0,7 5 5 e : panel thickness, < mm. General : pages 505/ and 505/ pages 505/ and 505/ pages 505/ and 505/ Compatibility : pages 5056/ and 5056/ 5055_Ver.00-EN.fm/

10 Connections Counters Totalising counters, predetermining counters and totalising timers XBK-T50000U//M XBK-T70000U00M -/ XBK-T80000U00M XBK-T60000U/M XBK-T60000U0M -/ XBK-T80000U00M XBT-T800UE XBK-H80000E XBK-P5000D/0M XBK-P5000U/0M PNP NPN Reset Count 0 V Keylock 0 0 Reset Count 0 V Keylock XBK-P6//0G/E $ V $ V " 0 V " 5 V -wire sensor/detector type XS, XU R = 0 kω XBKP6//0G0E default configuration (PNP) Black 5-wire sensor/detector type XS, XU Blue Red Brown (NO) or Orange (NC) XBKP6//0G0E default configuration (PNP) -wire sensor/detector type XS, XU 0 R = 0 kω XBKP6//0GE or GE default configuration (PNP) $ V " 0 V " 5 V Black 5-wire sensor/detector type XS, XU Blue Red Brown (NO) or Orange (NC) 0 XBKP6//0GE or GE default configuration (PNP) -wire sensor/detector or photocell relay or limit switch or pushbutton A A Control relay type CA 7 XBKP6//0G0E default configuration (PNP) 6 General : pages 505/ and 505/ pages 505/ and 505/ pages 505/ and 505/ Compatibility : pages 5056/ and 5056/ 5055_Ver.00-EN.fm/

11 Characteristics Zelio Count - counters 0 Electronic totalising counters, x, 8 digits, LCD Technical characteristics Function Impulse counter Display 8 digit LCD Digit height mm 7 Counting capacity Input characteristics voltage levels Terminals - 5 V a / c 5 50 Terminals 5-6 V a 0 Reset to zero characteristics () Front panel Dipswitch n to OFF Inhibited Dipswitch n to ON Enabled Voltage Terminals - V a / c 5 50 Terminals - V a 0 Counting speed characteristics Slow counting Hz 0 Minimum impulse duration Low level ms High level ms Input levels V c 0 Input impedance kω.5 min Supply characteristics alkaline batteries Life years lithium battery Life 8 years Supply can be switched off via Dipswitch n located on the underside of the device General characteristics Material Self-extinguishing Connection By 6 screw terminals on back of the device Clamping capacity mm x.5 Fixing By yoke Front panel degree of protection IP 66 Temperature limits Operation C Storage C Insulation resistance Conforming to IEC 55.5 MΩ 00 (c 500 V) Di strength Conforming to IEC V/50 Hz/ min Conforming to standards VDE 00, IEC 66,, 55., 55.5, 80., 80. Approvals c UL us, CSA () The reset is galvanically isolated from the counting input. page 856/ page 856/ Schemes : pages 856/ and 8565/ 856_Ver.00-EN.fm/

12 References, dimensions, scheme Zelio Count - counters 0 Electronic totalising counters, x, 8 digits, LCD b 8-digit LCD display; digit height 7 mm b Powered by alkaline batteries or lithium battery b Counting inputs : solid state (c 0 V) or voltage (up to c 0 V) b Dimensions DIN - x mm b Reset on front panel or external with inhibit facility 5608 References Totalising counters, LCD x Description Reference Weight kg Voltage input, lithium battery RC RC Accessories Description Dimensions Reference Weight kg Adaptors for 5x50 mm (dimensions 9x5 mm) RC panel cut-out 5x5 mm (dimensions 5x5 mm) RC Ø 50 mm (dimensions Ø 7 mm) RC Dimensions RC Panel cut-out (Max. thickness 0mm) unit units,6 0,6, , - 0 0,8 6 RC RC RC , , 9 8, Scheme (other schemes on page 8565/) V ~ 5. 50V ~/ V 0V ~/ ~ Terminals - Reset a 0 V -0Vreset - Reset a/c 5 50 V -a/c 5 50 V 5-0V 6-a 0 V Reset inputs Start/stop inputs page 856/ 856_Ver.00-EN.fm/

13 Characteristics, schemes Zelio Count - counters 0 Electronic total/partial impulse counters, x, 8 digits, LCD Technical characteristics Function Impulse counter Display 8 digit LCD Digit height mm 7 Counting capacity Input characteristics Counter type RC RC Input type counting input by volt-free contact or galvanically isolated counting input NPN or PNP open-collector transistor (terminals - ) Minimum time closed ms 0 Voltage Terminals - 5 V a / c 5 50 Terminals 5-6 V a 0 Reset to zero characteristics () Front panel External (total counter) Partial counter always enabled Volt-free contact or NPN or PNP opencollector transistor (terminals - ) Minimum time closed ms 0 0 Voltage Terminals - V a / c 5 50 Terminals - V a 0 Counting input characteristics Counting speed (selectable with dispwitch n ) Hz or 00 Slow counting (minimum impulse duration) Fast counting (minimum impulse duration) Supply characteristics Low level ms 5 High level ms 5 Low level ms 5 High level ms 5 lithium battery Life 5 years Supply can be switched off via Dipswitch n located on the underside of the device General characteristics Material Connection Self-extinguishing By 6 screw terminals on back of the device Clamping capacity mm x.5 Fixing By yoke Front panel degree of protection IP 66 Temperatures Operation C Storage C Conforming to standards VDE 00, IEC 66, IEC, IEC 55., IEC 55.5, IEC 80., IEC 80. Approvals c UL us, CSA () The reset is galvanically isolated from the counting input. Schemes (other schemes on pages 8565/ and 8565/) RC RC NC NC. 0V ~ 5. 50V ~/ V 0V ~/ ~ General reset inputs Counting inputs General reset inputs Counting inputs Terminals - General reset input - General reset common - Count common -Counting 5 - Not connected 6 - Not connected Terminals -Reseta 0 V - General reset common -Reseta/c 5 50 V -a/c 5 50 V 5 - Count common 6-a 0 V page 856/ page 856/ 856_Ver.00-EN.fm/

14 References, dimensions Zelio Count - counters 0 Electronic total/partial impulse counters, x, 8 digits, LCD b Partial or total count display b Counting capacity : v partial : v total : b Counting inputs and reset inputs : v RC : solid state v RC : voltage b Decimal point b Integral module for voltage inputs (a / c 5 50 V, a 0 V) b Powered by lithium battery. Life : 5 years b Front panel reset for "partial" count b Front panel or al reset for total count b Accessories for panel cut-out 5 x 50, 5 x 5, Ø References Total/partial impulse counters, LCD x Description Reference Weight kg Solid state input RC Voltage input RC RC Accessories Description Dimensions Reference Weight kg Adaptors for 5x50 mm (dimensions 9x5 mm) RC panel cut-out 5x5 mm (dimensions 5x5 mm) RC Ø 50 mm (dimensions Ø 7 mm) RC Dimensions RC p0 Panel cut-out (Max. thickness 0mm) unit units,6 0,6, , - 0 0,8 6 RC RC RC , , 9 8, page 856/ Schemes : page 856/ 856_Ver.00-EN.fm/

15 Characteristics Zelio Count - counters 0 Electronic totalising counters, hour counters, chronometers x, 6 or 8 digits, LCD Counter type RC RC Technical characteristics Functions Impulse counter Hour counter/chronometer Solid state input Solid state Solid state Display 8 digit LCD 6digitLCD Digit height mm 7 7 Counting capacity Time ranges h min s 0 99 h 59 min 59 s Time base Quartz (precision ± 50 ppm) Possibility of reloading current value Yes Supply lithium battery Life 8 years 5years Input characteristics Volt-free contact Start/Stop input 0 ms minimum (terminals -5) Reset input 00 ms minimum (terminals -) Prog. input (terminals -) enable Reset input (terminals -) Slow input In.L Volt-free contact or transistor Hz 0 max TOFF ms min TON ms min Current output µa 5 max Leakage current in OFF state µa 0. max Residual voltage V 0. max NPN collector Fast input khz 7max In.H TOFF µs 70 min TON µs 70 min Level 0 V c 0 Level V c 0 Current consumption ma 6maxatc V Reset to zero : Reset Volt-free contact or transistor Volt-free contact or transistor NPN open collector ms minimum 00 minimum Enable reset Front panel Front panel Electromagnetic environment characteristics Radiated field Conforming to IEC Level,0V/M,6MHztoGHz Fast transients Conforming to IEC Level, kv Damped oscillatory wave Conforming to IEC 55- Level, kv Electrostatic discharge Conforming to IEC Level, 8 kv Operating characteristics Material Self-extinguishing Connection by screw terminals on back of the device 5 terminals Clamping capacity mm x.5 Fixing By yoke Degree of protection IP 6 Temperature limits Operation C 0 55 Storage C Conforming to standards VDE 00, IEC 66,, 55., 55.5, 80., 80. Approvals c UL us, CSA page 856/ page 856/ Schemes : page 856/ 856_Ver.00-EN.fm/

16 References, dimensions, schemes Zelio Count - counters 0 Electronic totalising counters, hour counters, chronometers x, 6 or 8 digits, LCD 5608 b 8 or 6 digit LCD display, digit height 7 mm b Totalising counter : v 7 khz and 0 Hz inputs v Maximum counting capacity : impulses b Hour counter/chronometer : v Start/stop inputs v time ranges : hours min s - 99 h 59 min 59 s b Powered by lithium battery. v Reset from front panel or remote reset References Totalising counters, LCD x Description Reference Weight kg Impulse counter RC Hour counter/chronometer RC RC Accessories Description Dimensions Reference Weight kg Adaptors for panel cut-out 5x50 mm (dimensions 9x5 mm) RC x5 mm (dimensions 5x5 mm) RC Ø 50 mm (dimensions Ø 7 mm) RC Dimensions RC p0 08,6 7,,,8 Panel cut-out - 0, 0 0,8-0,5 0 0 ;;; yyy ; y ;;; yyy ; y RC RC RC , , 8, Schemes RC RC In. L En.R In. H Reset Terminals - Reset input - Enable Reset - Slow counting -OV 5 - Fast counting 5 08, Fast counting input Slow counting input and reset Enable Reset input 5 Enable Reset Prog. Reset Start/Stop 00 ms Terminals - Reset input - Enable Reset - Common -Prog. 5 - Start/Stop,,5 08 H 08 H Start/Stop input Prog. Reset Enable Reset input page 856/ 856_Ver.00-EN.fm/

17 Characteristics Zelio Count - counters 0 Electronic hour counters, x, 6 digits, LCD Technical characteristics Function Hour counter Display 6 digit LCD Digit height mm 7 Time ranges h min s 0 99 h 59 min 59 s Time base Quartz (precision ± 50 ppm) Possibility of reloading current value Yes Input characteristics Input type start/stop input Voltage Terminals - 5 V a / c 5-50 Terminals 5-6 V a 0 Minimum impulse time a ms 50 c ms 5 Reset characteristics () Front panel Dipswitch n to OFF Inhibited Dipswitch n to ON Enabled Voltage Terminals - V a / c 5-50 Terminals - V a 0 Minimum impulse time ms 00 Supply characteristics lithium battery Life 5 years Supply can be switched off via Dipswitch n located on the underside of the device General characteristics Material Self-extinguishing Connection By 6 screw terminals on back of the device Clamping capacity mm x.5 Fixing By yoke Front panel degree of protection IP 66 Temperature limits Operation C Storage C Conforming to standards VDE 00, IEC 66,, 55., 55.5, 80., 80. Approvals c UL us, CSA () The reset is galvanically isolated from the counting input. page 856/ page 856/ Schemes : page 856/ 856_Ver.00-EN.fm/

18 References, dimensions, scheme Zelio Count - counters 0 Electronic hour counters, x, 6 digits, LCD b Inputs and reset : voltage b Integral module for voltage inputs(a or c 5 50 V, a 0 V) b time ranges : v h min v s - 99 h 59 min 59 s b Possibility of reloading current value b Powered by lithium battery. Life 5 years b Reset on front panel or external with inhibit facility References RC Hour counters, LCD x Description Reference Weight kg Voltage input RC Accessories Description Dimensions Reference Weight kg Adaptors for 5x50 mm (dimensions 9x5 mm) RC panel cut-out 5x5 mm (dimensions 5x5 mm) RC Ø 50 mm (dimensions Ø 7 mm) RC Dimensions RC Panel cut-out (Max. thickness 0 mm) unit units,6 0,6, , - 0 0,8 6 RC RC RC , , 9 8, Scheme (other schemes on page 8565/) V ~ 5. 50V ~/ V 0V ~/ ~ Terminals - Reset a 0 V - Reset common - Reset a/c 5 50 V -a/c 5 50 V 5 - Start/stop common 6-a 0 V A Reset inputs B Start/stop inputs page 856/ 856_Ver.00-EN.fm/

19 Schemes Zelio Count - counters 0 Counters x Connection schemes RC Fast counting input Counting and general reset input Voltage -0V Volt-free contact NPN transistor or -wire NPN proximity sensor () (RC ) NPN -0V OV PNP transistor or -wire PNP proximity sensor () (RC ) -0V PNP -wire proximity sensor -0V R() OV -wire proximity sensor -0V OV R() () For sensor with leakage current 0. ma () R = 70 Ω /Ω for a -wire sensor with leakage current.5 ma page 856/ 8565_Ver.00-EN.fm/

20 Schemes Zelio Count - counters 0 Counters x Connection schemes RC , RC , RC Voltage Counting input RC Start/Stop input RC Reset RC , RC , RC V~/ -0V~ 5 6-0V~ 5-50V~/ Live contact 5-50V~/= -0V~ 5 6-0V~ 5-50V~/ PNP transistor or -wire PNP proximity sensor () 5-50V 5-50V PNP PNP OV 5 OV NPN transistor or -wire NPN proximity sensor () 5-50V 5-50V NPN NPN OV 5 OV -wire proximity sensor 0V max 0V max R() 5 R() OV OV -wire proximity sensor 0V maxi 0V maxi OV R() 5 OV R() () For sensor with leakage current 0. ma () R = 70 Ω /Ω for a -wire sensor with leakage current.5 ma pages 856/ to 856/ 8565_Ver.00-EN.fm/

21 Functions Zelio Count - counters 0 Multifunction counters with display Models RC and RC Input modes Input mode UP DN PNP : count on rising edge NPN : count on falling edge n n- n- n- n- n-5 n-6 Input IN Display Input IN Display IND CUMUL DIR Up DOWN Up n n - n - n - n - n - n n - n n- n - n - n - 5 n Input IN count in the direction of the cycle Input IN count in the direction of the cycle Input IN input pulses Input IN count in the opposite direction from the cycle Input IN count in the opposite direction Input IN reversal of counting direction Display (O...P) channel up/down counters from the cycle Display (O...P) channel up/down counters Display (P...O) channel up/down counters Display (O...P) channel up/down counters Display (P...O) channel up/down counters Display (P...O) channel up/down counters PH PH PH n n - n - n - n - n - n n - =0 Input IN (signals 90 out of phase) Input IN (signals 90 out of phase) Display (O...P) Display (P...O) Output modes Single cycle =n n - n - n - n- n - n - 0 n n- n- n- n- n-5 n- n- n- n- Input IN counts on rising and falling edges Input IN direction of count reversed if IN in advance of IN Display (O...P) Display (P...O) presets n n- n- n- n- n-5 n-6 n-7 Input IN counts on rising and falling edges Input IN counts on rising and falling edges, direction of count reversed if IN in advance of IN Display (O...P) Display (P...O) PR 0 P-----P P P- P P- P P PR P- P P P P P P----- ON OFF PR 0 P P P- P P P----- P P 0 PR P- P P P--- P t P- P t ON OFF Repetitive cycle Maintained PR 0 P P P P n n P P 0 PR P n n t ON OFF Pulsed (transient pulse) (t = s) Pulsed with auto Reset to value of P (or P for preset) (t = 500 ms) t = 0. s to 9.9 s for multifunction Batch counter function Principle P is the batch preset When P is displayed, the value displayed on the upper digits represents the current counter value (reset to P). In this configuration the RST key on the front panel of the device reinitialises the current value. When P (batch preset) is displayed, the value displayed on the upper digits represents the value of the Batch counter. In this configuration the RST on the front panel of the device resets the batch counter. An "al" reset (RST terminal) still resets the current counter value and that of the batch counter. Example On a packing line, bottles need to be counted Current counter into packs of 6 bottles and then despatched in OUT a box containing a batch of packs. Batch counter 0 0 P : current counter preset value : OUT P : batch counter preset value : 0000 Reset pages 8567/ and 8567/ pages 8568/ and 8568/ pages 8568/ and 8568/ Schemes : pages 8568/ and 8568/ 8566_Ver.00-EN.fm/

22 Functions Zelio Count - counters 0 Multifunction counters with display Models RC and RC Totalising counter function On multifunction version b Totalising counter reset via front panel only b Current value reset via front panel and al Signal measurement period Time TR Time TL Start of measurement Signal to be measured End of measurement Tachometer function Measurement principle Measurement begins on a rising edge of the signal to be measured The measurement time is greater than TR, but less than TL. Measurement stops at the end of the current period () after TR. If the period () does not end before TL, the measurement result will be zero (0). The outputs are updated at the end of each measurement according to the selected output mode. b Maintained output : output active if the measured speed is greater than the preset speed b Pulsed output : output activated during time T, when the preset threshold is crossed Measurement accuracy : 00 (00/TR) PPM Example : for TR = s : 00 PPM (0.0 %). Speed Speed P P P P 0 Out () Out t 0 Out () Out t Out () Out Out () Out 00 rev/min 0 m/s () Maintained () Pulsed output Application example You wish to display a linear speed of.00 m/s for a drive pulley rotating at 00 rev/min. A sensor on this pulley delivers one pulse, per revolution, i.e. : Ns Coef RPX V = n Required display : V =.00 (result in m/s RPX = ). Given that : n = 00 Ns = = 5 60 V n 00 Dwhere Cœf = Cœf = Ns RPX = 5 0 In addition, the decimal point is positioned in the hundreds (xxxx.xx). Selection of TR : you wish the measurement to be updated every seconds TR = s. Select TL > TR, for example TL = s. The tachometer function can also be used to calculate a flow rate. Chronometer function (precision : 50 ppm) PROG IN Input IN Display (0...PR), channel pulse measurement Display (PR...0), channel pulse measurement T T Tn --- Tn - T T T T Tn - (T T) PROG IN Input IN Display (0...PR), channel period measurement Display (PR...0), channel period measurement 0 Tn T T Tn - T T T T Tn - (T T) PROG IN Input IN (start counting) Input IN (stop counting) Display (0...PR), measurement on separate channels Display (PR...0), measurement on separate channels 0 Tn T T T Tn - T T T Tn - (T T) pages 8567/ and 8567/ pages 8568/ and 8568/ pages 8568/ and 8568/ Schemes : pages 8568/ and 8568/ 8566_Ver.00-EN.fm/

23 Characteristics Zelio Count - counters 0 Preselection and multifunction counters Models RC and RC Counter type RC ppp RC ppp Technical characteristics Functions Number of presets Back-lit or red illuminated display Mulltifunction Preselection up/down counters Counters, 'Batch' counters, tachometers and chronometers or Current value 5 digits 6digits Preset 5 digits 6digits Digit height Current value mm 8 0 Preset mm 6 Display capacity Simultaneous readout of count value and one preset Yes Yes Input characteristics Counters, 'Batch' counters, totalising counters, tachometers and chronometers Inputs counting inputs IN, IN counting inputs IN, IN, inhibit input Input modes (see page 8566/) UP, DN, DIR, IND, CUMUL PH, PH, PH Input by contact Voltage or solid state for -wire and -wire detection using external resistor (NPN or PNP depending on wiring) Counting speed Counters 5 khz or 0 Hz.5 khz PH Voltage or solid state (NPN/PNP depending on wiring) 5 khz (.5 khz in phase x ) 0 Hz in debounce mode Mulltifunction Counter Tachometer Counter Tachometer Totalising counter UP, DOWN, DIR khz IND, CUMUL (IN, IN non khz simultaneous) IND, CUMUL (IN, IN simultaneous) khz 5 5 PH, PH khz 5 (except in Batch mode) : khz) 5 (except in Batch mode) : khz).5 PH khz Low level V c 0 High level V c 0 Impedance kω 0 Reset characteristics Reset to zero or to preset value Front panel Electrical If not protected in programming phase By contact, voltage or solid state (NPN or PNP depending on wiring) By contact, voltage or solid state (NPN or PNP) Minimum pulse time ms 5 Low level V c 0 High level V c 0 Impedance kω 0 Option to protect against reset from front panel Yes Scale factor (each input pulse is multiplied by this figure) Decimal point selectable for ease of reading xxxxx, xxxx.x, xxx.xx, xx.xxx xxxxxx, xxxxx, x, xxxx, xx, xxx.xx, xx.xxxx Sensor supply a version c or 00 V c version Un- V/00 ma Configuration and current value saved In EEPROM memory Functions : pages 8566/ and 8566/ pages 8568/ and 8568/ pages 8568/ and 8568/ Schemes : pages 8568/ and 8568/ 8567_Ver.0-EN.fm/

24 Characteristics (continued) Zelio Count - counters 0 Preselection and multifunction counters Models RC and RC Counter type RC ppp RC ppp Output characteristics Solid state outputs - Type NPN open collector - Maximum current ma 00 - Maximum voltage V c 0 - Voltage drop V <.5 - Response time µs < 50 Relay outputs - Type N/O contacts or solid state depending on model C/O contacts solid state - Rated current A - Maximum voltage V a 50 - Maximum breaking capacity (resistive) AC- VA Minimum current ma Response time ms < 0 - Mechanical life x0 6 operating cycles x0 7 operating cycles - Electrical life at I max. AC- x0 5 x0 5 - Output modes : maintained or pulsed (fixed or adjustable pulse duration)) t = s t = s - Single cycle or repetitive (immediate auto reset) Yes Supply (min/max values) V c 0 0,a0 55, a Maximum consumption c version W <5 a 50/60 Hz version VA 0 < General characteristics Immunity to microbreaks c 0 0 V version ms 0 a 0 55 V version ms 0 a V version ms 0 Relative humidity (without condensation) 95 % Altitude m Insulation (IEC 66-) kv.5 Standards Conforming to IEC Level Conforming to IEC Level Conforming to IEC Level Conforming to IEC Level Conforming to IEC 550/ group Class A Vibration withstand on axes conforming to IEC Hz / 0.5 mm Material Self-extinguishing Connection Screw terminals Clamping capacity mm x.5 Front panel fixing With bracket Front panel protection IP 5 Front panel seal Yes Temperature limits Operation C 0 55 Storage C Approvals c UL us, CSA Functions : pages 8566/ and 8566/ pages 8568/ and 8568/ pages 8568/ and 8568/ Schemes : pages 8568/ and 8568/ 8567_Ver.0-EN.fm/

25 References, dimensions, schemes Zelio Count - counters 0 Electronic preselection and multifunction counters, x, 5 digit, LCD or LED References Preselection and multifunction up/down counters x Functions : counter, batch counter, tachometer, chronometer Counting input modes UP, DN, IND, CUMUL, DIR, PH, PH, PH Time base : 99 h 59 min, 99 min 59 s, s, h presets Description Supply voltage Outputs Reference Weight kg Back-lit LCD display a V N/O RC solid state RC a 0 55 V N/O RC solid state RC RC c 0 0V N/O RC solid state RC Red LED display a V N/O RC solid state RC a 0 55 V N/O RC solid state RC RC Dimensions Display c 0 0V N/O RC solid state RC Panel cut-out P RST P RST Reset Access to all parameters in Prog. mode Incrementation of figures and multipliers selection of a parameter value Connection schemes RC p, RC p RC p, RC p Supply Supply Functions : pages 8566/ and 8566/ pages 8567/ and 8567/ 8568_Ver.00-EN.fm/

26 References, dimensions, schemes Zelio Count - counters 0 Electronic preselection and multifunction counters, 7 x 7, 6 digit, LCD or LED References Preselection and multifunction up/down counters 7 x 7 Functions : counter, batch counter, tachometer, chronometer, totalising counter Counting input modes UP, DN, IND, CUMUL, DIR, PH, PH, PH Time base : 99 h 59 min, 99 min 59 s, s, h, h, min. presets Description Supply voltage Outputs Reference Weight kg Back-lit LCD display a V C/O solid state RC a 0 55 V C/O solid state RC RC c 0 0V C/O solid state RC Red LED display a V C/O solid state RC a 0 55 V C/O solid state RC RC c 0 0V C/O solid state RC Dimensions Display Panel cut-out 7 P OUT P OUT P P RST P P RST Reset / Access to all parameters in Prog. mode Incrementation of figures and multipliers selection of a parameter value Connection schemes RC p, RC8769p Supply Functions : pages 8566/ and 8566/ pages 8567/ and 8567/ 8568_Ver.00-EN.fm/