Pavos Series - Small Aperture ( 5mm) nm Faraday Rotators and Isolators

Size: px
Start display at page:

Download "Pavos Series - Small Aperture ( 5mm) nm Faraday Rotators and Isolators"

Transcription

1 Trnsmission (%) Isoltion (db) Trnsmission (%) Isoltion (db) Benefits: Pvos Series - Smll Aperture ( 5mm) nm Frdy Rottors nd Isoltors EOT s Pvos Series Frdy Rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes n opticl isoltor. An opticl isoltor shields lsers from destbilizing nd potentilly destructive bck-reflected light from interfces on downstrem optics or bck-scttered ASE from opticl mplifiers. Bsed on high Verdet constnt, low bsorption coefficient Terbium-bsed rotting mteril, nd developed to work with up to 50W of verge input power in the 1µm wvelength rnge, Pvos Series opticl isoltors provide the ultimte protection for polrized output from Nd or Yb-doped crystl, glss, nd fiber lsers. Decouple Nd nd Yb oscilltors from ASE creted by mplifiers Eliminte relxtion oscilltions in modelocked lsers due to opticl feedbck Eliminte frequency instbility in seed sources Specifictions : nm Rottor nm Isoltor b nm Isoltor b Pek Trnsmission c >98% >95% >95% Pek Isoltion c N/A >33dB >33dB Pek Rottion 45⁰ ± 0.5⁰ 45⁰ ± 0.5⁰ 45⁰ ± 0.5⁰ Storge Temperture Rnge C C C Tunble Temperture Rnge C C C Isolted Bem Pointing d <5mrd <5mrd <5mrd Dmge Threshold c 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW Fetures: Product tested to >400W CW power 2 incident ngle on polrizers for reduced insertion losses Orthogonl isolted bems Precision pointing of isolted bem Precision mounting options Lockble port covers Optionl λ/2 plte vilble for ll isoltors 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW Product specifictions re subject to chnge. b Escpe ports should be used if rejected light is >1W or 0.15J/cm 2 t 10ns or forwrd light is >25W. All stry bems should be properly terminted. c At customer-specified wvelength nd temperture d Input cube only Note: All products re RoHS complint Isoltor Performnce * Operting Temp. Device Temperture ( C) Trnsmission (%) Isoltion (db) Isoltor Performnce * Operting λ Wvelength (nm) Trnsmission (%) Isoltion (db) (800) Fx: (231) sles@eotech.com (01/06/2016)

2 Pvos Series Rottor Dimensions : Pvos Series Isoltor Dimensions : All dimensions in mm Model Number: A A B C C C C D D D E E E Aperture Size (mm) Device Type Oper. Wvelength Input Polriztion Output Polriztion 02, 05 R - Rottor I - Isoltor nm nm Exmple: Description: 5mm isoltor centered t 1064nm with wveplte; input horizontl, output horizontl Model Number: 05-I Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (01/06/2016)

3 Trnsmission (%) Isoltion (db) Trnsmission (%) Isoltion (db) Pvos Series - Lrge Aperture (>5mm) nm Frdy Rottors nd Isoltors EOT s Pvos Series Frdy Rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes n opticl isoltor. An opticl isoltor shields lsers from destbilizing nd potentilly destructive bck-reflected light from interfces on downstrem optics or bckscttered ASE from opticl mplifiers. Bsed on high Verdet constnt, low bsorption coefficient Terbium-bsed rotting mteril, nd developed to work with up to 50W of verge input power in the 1µm wvelength rnge, Pvos Series opticl isoltors provide the ultimte protection for polrized output from Nd or Yb-doped crystl, glss, nd fiber lsers. Benefits: Decouple Nd nd Yb oscilltors from ASE creted by mplifiers Eliminte relxtion oscilltions in modelocked lsers due to opticl feedbck Eliminte frequency instbility in seed sources Fetures: All devices re completely pssive, no tuning required All isoltors contin escpe ports; ll rejected bems re deflected t 90 Optionl λ/2 plte vilble for ll isoltors Specifictions : nm Rottor nm Rottor nm Isoltor b nm Isoltor b Trnsmission t 22⁰C >98% >98% >92% >92% Isoltion t 22⁰C N/A N/A >30dB >30dB Rottion t Specified Wvelength 45⁰ ± 2⁰ 45⁰ ± 2⁰ 45⁰ ± 2⁰ 45⁰ ± 2⁰ Dmge Threshold Product specifictions re subject to chnge. b Escpe ports should be used if rejected light is >1W or 0.15J/cm 2 t 10ns or forwrd light is >25W. All stry bems should be properly terminted. Note: All products re RoHS complint. 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW 10J/cm 2 t 10ns 1J/cm 2 t 8ps 1MW/cm 2 CW Typicl Isoltor Performnce Typicl Isoltor Performnce Temperture ( C) Trnsmission (%) Isoltion (db) Wvelength (µm) Trnsmission (%) Isoltion (db) (800) Fx: (231) sles@eotech.com (01/06/2015)

4 Pvos Series Rottor Dimensions : Aperture (mm) A B C D E F G H Ø= Ø= Ø= n/ n/ n/ n/ n/ n/ Pvos Series Isoltor Dimensions : Aperture (mm) A B C D E F G H Ø= Ø= Ø= n/ n/ n/ n/ n/ n/ All dimensions in inches Model Number: A A B C C C C D D D E E E Aperture Size (mm) Device Type Oper. Wvelength Input Polriztion Output Polriztion 08, 12, 15, 20, 25, 35, 45 R - Rottor I - Isoltor nm nm Exmple: Description: 8mm isoltor centered t 1064nm with wveplte; input horizontl, output horizontl Model Number: 08-I Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (01/06/2015)

5 Pvos Ultr Series 1010 nm nm Frdy Rottors nd Isoltors EOT s Pvos Ultr Series Frdy Rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes n opticl isoltor. An opticl isoltor shields lsers from destbilizing nd potentilly destructive bck-reflected light from interfces on downstrem optics or bck-scttered ASE from opticl mplifiers. Bsed on high Verdet constnt, low bsorption coefficient rotting mteril nd developed to work with up to 400 W* of verge input power in the 1 µm wvelength rnge, Pvos Ultr Series opticl isoltors provide the ultimte protection for polrized output from Nd or Yb-doped crystl, glss, nd fiber lsers. Benefits: Significntly reduced therml lens focl shift t >100 W reduces the need for dditionl optics to optimize spot size nd significntly reduces the rnge of therml lens focl shift s the lser power is vried Lower therml birefringence resulting in higher isoltion t >100 W enbles the use of higher gin mplifiers nd in some cses my eliminte the need for second isoltor Greter flexibility in design with respect to B integrl due to lower nonliner refrctive index Specifictions : 1010 nm nm Rottor 1010 nm - 1 nm Isoltor b 1 nm nm Isoltor b Pek Trnsmission c >95% >95% >95% Pek Isoltion c Extinction N/A >36 db typicl >30 db minimum >33 db typicl >27 db minimum N/A >33 db typicl >27 db minimum Pek Rottion 45⁰ +2/-5⁰ 45⁰ +2/-5⁰ 45⁰ +2/-5⁰ Storge Temperture Rnge -40 C - 70 C -40 C - 70 C -40 C - 70 C Tunble Temperture Rnge 10 C - 30 C 10 C - 30 C 10 C - 30 C Isolted Bem Pointing d N/A <5 mrd <5 mrd Dmge Threshold c 7 J/cm2 t 10 ns 600 mj/cm 2 t 8 ps Fetures: Power hndling up to 400 W* All devices re pssive; no tuning required All isoltors contin escpe ports for rejected bem(s) Polrizing bem splitter cube polrizers result in no bem offset 7 J/cm 2 t 10 ns 600 mj/cm 2 t 8 ps N/A 7 J/cm 2 t 10 ns 600 mj/cm 2 t 8 ps Product specifictions re subject to chnge. b Escpe ports should be used if rejected light is >1 W or 0.15 J/cm 2 t 10 ns or forwrd light is >25 W. All stry bems should be properly terminted. c At customer-specified wvelength nd temperture d Input cube only Note: All products re RoHS complint. * For powers higher thn 400 W, contct EOT. (800) Fx: (231) sles@eotech.com (09/28/2018)

6 Pvos Ultr Series Rottor Dimensions : Aperture (mm) A B C D E F G H Pvos Ultr Series Isoltor Dimensions : Aperture (mm) A B C D E F G H All dimensions in inches Model Number: A A B C C C C D D D E E E Aperture Size (mm) Device Type Oper. Wvelength Input Polriztion Output Polriztion 05, 08 R - Rottor I - Isoltor 1010 nm - 1 nm 1 nm nm Exmple: Description: 5 mm isoltor centered t 1064 nm with wveplte; input horizontl, output horizontl Model Number: 05-I , Ultr Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (09/28/2018)

7 Mkros Series nm Frdy Rottors nd Isoltors EOT s Mkros Series Frdy Rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes n opticl isoltor. An opticl isoltor shields lsers from destbilizing nd potentilly destructive bck-reflected light from interfces on downstrem optics or bck-scttered ASE from opticl mplifiers. Bsed on high Verdet constnt, low bsorption coefficient rotting mteril, nd developed to work with up to 30W of verge input power in the nm wvelength rnge, Mkros Series opticl isoltors provide the ultimte protection for polrized output from Ho nd Tm lsers. Benefits: Decouple Ho nd Tm lser oscilltors from ASE creted by mplifiers Eliminte relxtion oscilltions in modelocked Ho or Tm lsers Protect Ho or Tm lsers from dmge due to high pulse energy bck reflections Fetures: All devices re completely pssive, no tuning required All isoltors contin escpe ports; ll rejected bems re deflected t 90 Optionl λ/2 plte vilble for ll isoltors Specifictions, b : Product specifictions re subject to chnge. b Return Loss-free working distnce 25mm for collimted bem c Escpe ports should be used if rejected light is >1W or 0.15J/cm 2 t 10ns or forwrd light is >25W. All stry bems should be properly terminted. Note: All products re RoHS complint nm Rottor nm Isoltor c Trnsmission t 22⁰C >95% >92% Isoltion t 22⁰C Pulsed Dmge Threshold Power Hndling N/A 5J/cm 2 t 10ns 30W >30dB 5J/cm 2 t 10ns 30W (800) Fx: (231) sles@eotech.com (01/06/2015)

8 Mkros Series Rottor Dimensions : 1.95µm Mkros Series Isoltor Dimensions : 1.95µm All dimensions in inches Model Number: A A B C C C C D D D E E E Aperture Size (mm) Device Type Oper. Wvelength Input Polriztion Output Polriztion 04 R - Rottor I - Isoltor nm Exmple: Description: 4mm isoltor centered t 1950nm with wveplte; input horizontl, output horizontl Model Number: 04-I Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (01/06/2015)

9 Mkros Series nm Frdy Rottors nd Isoltors EOT s Mkros Series Frdy Rottors nd Isoltors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes opticl isoltor. An opticl isoltor shields lsers from destbilizing nd potentilly destructive bckreflected light from interfces on downstrem optics or bck-scttered ASE from opticl mplifiers. Bsed on high Verdet constnt, low bsorption coefficient rotting mteril, nd developed to work with up to 30W of verge input power in the nm wvelength rnge, Mkros Series opticl isoltors provide the ultimte protection for polrized output from Ho nd Tm lsers. Benefits: Decouple Ho nd Tm lser oscilltors from ASE creted by mplifiers Eliminte relxtion oscilltions in modelocked Ho or Tm lsers Protect Ho or Tm lsers from dmge due to high pulse energy bck reflections Fetures: All devices re completely pssive, no tuning required All isoltors contin escpe ports; ll rejected bems re deflected t 90 Optionl λ/2 plte vilble for ll isoltors Specifictions, b : Product specifictions re subject to chnge. b Return Loss-free working distnce 25mm for collimted bem c Escpe ports should be used if rejected light is >1W or 0.15J/cm 2 t 10ns or forwrd light is >25W. All stry bems should be properly terminted. Notes: All products re RoHS complint nm Rottor nm Isoltor c Trnsmission t 22⁰C >95% >92% Isoltion t 22⁰C Pulsed Dmge Threshold Power Hndling N/A 5J/cm 2 t 10ns 30W >30dB 5J/cm 2 t 10ns 30W (800) Fx: (231) sles@eotech.com (01/06/2016)

10 Mkros Series Rottor Dimensions : Mkros Series Isoltor Dimensions : All dimensions in inches Model Number: A A B C C C C D D D E E E Aperture Size (mm) Device Type Oper. Wvelength Input Polriztion Output Polriztion 04 R - Rottor I - Isoltor nm Exmple: Description: 4mm isoltor centered t 2050nm with wveplte; input horizontl, output horizontl Model Number: 04-I Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (01/06/2016)

11 Mesos Series nm Frdy Rottors nd Isoltors EOT s Mesos Series Frdy rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes n opticl isoltor. An opticl isoltor shields lsers from destbilizing nd potentilly destructive bck-reflected light from interfces on downstrem optics or bck-scttered ASE from opticl mplifiers. Bsed on high Verdet constnt rotting mteril nd developed to work with up to 2.5W of verge input power in the nm wvelength rnge, Mesos Series isoltors provide the ultimte protection for polrized output from Quntum Cscde Lsers (QCLs). Benefits: Eliminte frequency instbility in QCLs Prevent opticl dmge to QCLs due to bck reflections Fetures: Rugged design suitble for hrsh operting environments Optionl λ/2 plte vilble for ll isoltors Specifictions, b : nm Rottor nm Isoltor Trnsmission t 22⁰C >70% >65% Isoltion t 22⁰C N/A >30dB Power Hndling 2.5W 2.5W Product specifictions re subject to chnge. b Return Loss-free working distnce 25mm for collimted bem Note: All products re RoHS complint. (800) Fx: (231) sles@eotech.com (10/19/2015)

12 Mesos Series Rottor Dimensions : Mesos Series Isoltor Dimensions : All dimensions in inches Model Number: A A B C C C C D D D E E E Aperture Size (mm) Device Type Oper. Wvelength Input Polriztion Output Polriztion 04 R - Rottor I - Isoltor nm Exmple: Description: 4mm isoltor centered t 4550nm with wveplte; input horizontl, output horizontl Model Number: 04-I Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (10/19/2015)

13 Eurys Series - Smll Aperture (5mm) Brodbnd Frdy Rottors nd Isoltors for Ti:Spphire Lsers EOT s Eurys Series Brodbnd Rottors rotte the plne of polrized light 90 t 800nm in the forwrd direction nd 0 from nm in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, brodbnd Frdy rottor becomes brodbnd opticl isoltor. Eurys Series brodbnd opticl isoltors provide high trnsmission in the forwrd direction nd strongly ttenutes bck-reflected light between nm in the reverse direction protecting Ti:Spphire oscilltors from the deleterious effects of bck reflections nd lso eliminting preferentil lsing t the lower gin wvelengths of Ti:Spphire lsers. Utilizing optics with low refrctive indices nd short opticl pthlengths minimizes pulse brodening due to dispersion in the optics ssocited with ultr-short lser pulses. Benefits: Eliminte ASE from high-gin mplifiers tht cn cuse prsitic or relxtion oscilltions Prevent preferentil lsing t low-gin wvelengths by providing brodbnd isoltion Specifictions : Center Wvelength Spectrl Rnge Polrizer Type Rottor 800nm nm N/A Fetures: 2 incident ngle on polrizers for reduced return losses Orthogonl isolted bems Precision pointing of isolted bems Precision mounting options Lockble port covers Isoltor b 800nm nm SF1 Glss Trnsmission t 22 C >98% >92% Isoltion t 22 C Dmge Threshold N/A >3.5J/cm 2 t 10ns >1J/cm 2 t 8ps >33dB >3.5J/cm 2 t 10ns >1J/cm 2 t 8ps Product specifictions re subject to chnge. b Escpe ports should be used if rejected light is >1W or 0.15J/cm 2 t 10ns or forwrd light is >25W. All stry bems should be properly terminted. Note: All products re RoHS complint. Dispersion: Some pulse brodening does occur when using EOT s Brodbnd Isoltors. The Sellmeiers Eqution for TGG used in the brodbnd isoltors is: (800) Fx: (231) sles@eotech.com (07/25/2017)

14 Eurys Series Rottor Dimensions: Eurys Series Isoltor Dimensions: Model Number: A A B B C D D D E E E F F F Product Type Aperture Size (mm) Device type Oper. Wvelength Input Polriztion BB 05 R-Rottor I-Isoltor 800nm Exmple: Description: 5mm isoltor centered t 800nm; input horizontl, output verticl Model Number: BB-05-I Output Polriztion Input Polriztion Reference Notes: 1) Light is rotted clockwise 90 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (07/25/2017)

15 Trnsmission (%) Isoltion (db) Eurys Series - Lrge Aperture (>5mm) Brodbnd Frdy Rottors nd Isoltors for Ti:Spphire Lsers EOT s Eurys Series Brodbnd Rottors rotte the plne of polrized light 90 t 800nm in the forwrd direction nd 0 from nm in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, brodbnd Frdy rottor becomes brodbnd opticl isoltor. Eurys Series brodbnd opticl isoltors provide high trnsmission in the forwrd direction nd strongly ttenutes bck-reflected light between nm in the reverse direction protecting Ti:Spphire oscilltors from the deleterious effects of bck reflections nd lso eliminting preferentil lsing t the lower gin wvelengths of Ti:Spphire lsers. Utilizing optics with low refrctive indices nd short opticl pthlengths minimizes pulse brodening due to dispersion in the optics ssocited with ultr-short lser pulses. Benefits: Eliminte ASE from high-gin mplifiers tht cn cuse prsitic or relxtion oscilltions Prevent preferentil lsing t low-gin wvelengths by providing brodbnd isoltion Specifictions : Center Wvelength Spectrl Rnge Polrizer Type Rottor 800nm nm N/A Isoltor b 800nm nm PBS Cube Trnsmission t 22 C c >98% >92% Isoltion t 22 C Dmge Threshold N/A 5J/cm 2 t 10ns 2kW/cm 2 t 10ns Fetures: >30dB 1J/cm 2 t 10ns 2kW/cm 2 t 10ns Product specifictions re subject to chnge. b Escpe ports should be used if rejected light is >1W or 0.15J/cm 2 t 10ns or forwrd light is >25W. All stry bems should be properly terminted. c At center wvelength Note: All products re RoHS complint. Dispersion: Some pulse brodening does occur when using EOT s Brodbnd Isoltors. The Sellmeiers Eqution for TGG used in the brodbnd isoltors is: All devices re completely pssive; no tuning is required Combintion of low refrctive index optics nd short opticl pthlengths minimizes pulse brodening tht cn be ssocited with ultrshort pulses All isoltors contin escpe ports; ll rejected bems re deflected t 90 Typicl Brodbnd Isoltor Performnce Wvelength (nm) Trnsmission (%) Isoltion (db) (800) Fx: (231) sles@eotech.com (07/25/2017)

16 Eurys Series Rottor Dimensions : Aperture (mm) A B C D E F G H 8 b n/ b n/ Eurys Series Isoltor Dimensions : Aperture (mm) A B C D E F G H b n/ 1.00 n/ All dimensions in inches b Squre body, no clmp Model Number: A A B B C D D D E E E F F F Product Type Aperture Size (mm) Device type Oper. Wvelength Input Polriztion BB 08, 10 R-Rottor I-Isoltor 800nm Exmple: Description: 8mm isoltor centered t 800nm; input horizontl, output verticl Model Number: BB-08-I Output Polriztion Input Polriztion Reference Notes: 1) Light is rotted clockwise 90 from input to output for ll ctlog devices. (800) Fx: (231) sles@eotech.com (07/25/2017)

17 Tornos Series nm Wvelength Tunble Frdy Rottors nd Isoltors EOT s Tornos Series Frdy Rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes n opticl isoltor. An opticl isoltor provides high trnsmission in the forwrd direction nd strongly ttenutes ny light trveling in the reverse direction, effectively protecting lser diodes from the deleterious effects of bck reflections. Tornos Series opticl isoltors cn be ordered with dichroic glss polrizers to minimize the size of the device for low power pplictions or they cn be ordered with polrizing bem splitter cube polrizers for pplictions where mximum trnsmission is required nd power levels do not permit the use of dichroic glss polrizers. By ligning the output polrizer orthogonl to the bckwrd trveling light, isoltion cn be mximized within the usble wvelength rnge of the opticl isoltor. Benefits: Eliminte frequency instbility in single frequency lser diodes Eliminte prsitic oscilltions due to ASE in mplified lser systems Specifictions b : Rottors Center Wvelength Isoltion t 22⁰C c Trnsmission t 22⁰C d Pulsed Dmge Threshold 532nm 30dB >97% 3J/cm 2 t 10ns 650nm 30dB >98% 3J/cm 2 t 10ns 780nm 30dB >98% 3J/cm 2 t 10ns 850nm 30dB >98% 3J/cm 2 t 10ns 980nm 30dB >98% 3J/cm 2 t 10ns Isoltors Center Wvelength Spectrl Rnge Isoltion t 22⁰C e Trnsmission t 22⁰C d Polrizer Type Dmge Threshold f 650nm nm >30dB >72.5% Dichroic Glss 25W/cm 2 CW 780nm nm >30dB >82% Dichroic Glss 25W/cm 2 CW 850nm nm >30dB >88% Dichroic Glss 25W/cm 2 CW 980nm nm >30dB >90% Dichroic Glss 25W/cm 2 CW 532nm nm >27dB >88% PBS Cube 1J/cm 2 t 10ns 650nm nm >27dB >88% PBS Cube 1J/cm 2 t 10ns 780nm nm >27dB >88% PBS Cube 1J/cm 2 t 10ns 850nm nm >27dB >88% PBS Cube 1J/cm 2 t 10ns 980nm nm >27dB >88% PBS Cube 1J/cm 2 t 10ns The ddition of wveplte my restrict wvelength rnge. b Product specifictions re subject to chnge. c When plced between crossed polrizers hving n extinction rtio of 1:1 d At center wvelength e When tuned for mximum isoltion f Isoltors with PBS cube polrizers hve CW dmge threshold of 2KW/cm 2. Note: All products re RoHS complint. Fetures: Wvelength tunbility llows optiml isoltion t vriety of wvelengths Isoltors centered t 650nm, 780nm, 850nm, nd 980nm cn be ordered with either dichroic glss polrizers or polrizing bem splitter cube polrizers Optionl λ/2 plte vilble for ll isoltors Two isoltors cn be used in series to ttin 60dB isoltion which is often required for single frequency lser diodes (800) Fx: (231) sles@eotech.com (10/19/2015)

18 Tornos Series Rottor Dimensions : Center Wvelength (nm) A B C D E F G H Tornos Series Low Power Isoltor Dimensions : Center Wvelength (nm) A B C D E F G H Tornos Series Medium Power Isoltor Dimensions : Center Wvelength (nm) A B C D E F G H All dimensions in inches Model Number: A A B B C D D D D E E E F F F Product Type Aperture Size (mm) Device type Oper. Wvelength Input Polriztion Output Polriztion WT-Rottor LP-Low Power MP-Medium Power 04 R-Rottor I-Isoltor nm Exmple: Description: Medium Power 4mm isoltor centered t 650nm; with wveplte, input horizontl, output horizontl Model Number: MP-04-I Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on output for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (10/19/2015)

19 Benefits: Tornos Series Compct 520 nm nm Opticl Isoltors EOT s Tornos Series Compct Opticl Isoltors provide high trnsmission in the forwrd direction while strongly ttenuting light trveling in the reverse direction, effectively protecting lser diodes from the deleterious effects of bck reflections. EOT s Tornos Series Compct Opticl Isoltors llow for optiml isoltion nd trnsmission t specific wvelength within the spectrl bndwidth of the isoltor. Eliminte frequency instbility in single frequency Compct design suitble for OEM integrtion lser diodes nd HeNes Optionl wveplte for mnipultion of polriztion Eliminte mode-hopping in externl cvity diode Opticlly-contcted polrizing bemsplitter cubes lsers optimize trnsmission Eliminte prsitic oscilltions due to ASE in mplified diode lser systems High trnsmission llows the use of less expensive, lower power lser diodes Specifictions : Stndrd Wvelength Tunble Spectrl Rnge Isoltion b Trnsmission b Forwrd Power Temperture Hndling 532 nm 522 nm nm 10 ⁰C - 30 ⁰C >33 db >95% 5 W 561 nm 551 nm nm 10 ⁰C - 30 ⁰C >33 db >95% 5 W 638 nm 628 nm nm 10 ⁰C - 30 ⁰C >33 db >95% 5 W 660 nm 650 nm nm 10 ⁰C - 30 ⁰C >33 db >95% 5 W 730 nm 720 nm nm 10 ⁰C - 30 ⁰C >33 db >95% 5 W 785 nm 775 nm nm 10 ⁰C - 30 ⁰C >33 db >95% 5 W Product specifictions re subject to chnge. b At specified wvelength nd temperture Fetures: Note: Spectrl bndwidth is dependent upon wvelength. Contct EOT for more informtion. Customer cn specify ny center wvelength tht flls within the rnges outlined in the below chrt. Model Product Wvelength Rnge 2 mm VIS Isoltor 500 nm nm 4 mm VIS Isoltor 500 nm nm 2 mm NIR Isoltor 600 nm nm 4 mm NIR Isoltor 600 nm nm (800) Fx: (231) sles@eotech.com (07/12/2018)

20 Tornos Series Compct 2 mm VIS Isoltor Dimensions : Tornos Series Compct 4 mm VIS Isoltor Dimensions : Tornos Series Compct 2 mm NIR Isoltor Dimensions : Tornos Series Compct 4 mm NIR Isoltor Dimensions : All dimensions in inches Model Number: A A A A B B C D D D E E E F F F Product Type Aperture Size (mm) Device type Oper. Wvelength Input Polriztion Output Polriztion cldi 02, 04 I-Isoltor 532, , , 785 Exmple: Description: 4 mm isoltor centered t 532nm; with wveplte, input horizontl, output 90 Model Number: cldi-04-i Specific wvelength between 520 nm nm to be specified by end user Input Polriztion Reference Notes: 1) Light is rotted clockwise 45 from input to output for ll ctlog devices. 2) λ/2 wveplte vilble on input for rbitrry output polriztions, if required. (800) Fx: (231) sles@eotech.com (07/12/2018)

21 nm Low Power Frdy Rottors nd Isoltors EOT s nm Low Power Frdy Rottors rotte the plne of polrized light 45 in the forwrd direction nd n dditionl 45 of non-reciprocl rottion in the reverse direction while mintining the light s liner polriztion. When plced between crossed polrizers, Frdy rottor becomes opticl isoltor. An opticl isoltor provides high trnsmission in the forwrd direction nd strongly ttenutes ny light trveling in the reverse direction effectively protecting seed sources from the deleterious effects of bck reflections. EOT s nm Low Power Isoltors cn be ordered with either dichroic glss polrizers or with polrizing bem splitter cubes. If protecting seed source from bck reflections from Q-switched lser, EOT recommends using polrizing bem splitter cubes due to their bility to withstnd high pulse energies. Two isoltors cn be used in series if 60dB isoltion is required to ssure bck reflections do not cuse frequency instbility from single frequency single seed lser. Benefits: Decouple seed lsers from slve lsers Eliminte frequency instbility in singlefrequency lser diodes due to opticl feedbck Fetures: Compct size Isoltors cn be ordered with either dichroic glss polrizers or polrizing bem splitter cube polrizers Specifictions : Rottor Isoltor Polrizer Type N/A Polrcor PBS Cube Cler Aperture 1.5mm 1.5mm 1.5mm Trnsmission t 22⁰C 78% 75% 75% Isoltion t 22⁰C N/A 30dB 30dB Dmge Threshold 500mW CW 1MW/cm 2 t 10ns Product specifictions re subject to chnge. Note: All products re RoHS complint. (800) Fx: (231) sles@eotech.com (10/19/2015)

22 Low Power nm Rottor Dimensions : Low Power nm Isoltor-Polrcor Dimensions : Low Power nm Isoltor-PBS Dimensions : All dimensions in inches Model Number: A B B B D D D D E E E Aperture Size (mm) Film Type Oper. Wvelength Polrizer Type 2 BIG-Bismuth Iron Grnet nm ROT-Rottor (no polriztion) POL-Polrcor PBS-PBS Cube Exmple: Description: 2mm isoltor centered t 1064nm PBS Cube polrizer Model Number: 2BIG1064-PBS (800) Fx: (231) sles@eotech.com (10/19/2015)

23 EOT 70 W Fiber Lser Isoltor EOT s 70 W Fiber Lser Isoltors hve been specificlly designed for pulsed Yb Fiber Lsers used in mrking nd engrving pplictions. Mrking nd engrving of highly reflective metls cn result in lrge levels of bck reflection, creting the potentil for non-optiml performnce of the lser or even dmge to the lser. This cn result in uncceptble mrking qulity nd significnt down time. Utilizing high dmge threshold optics, these isoltors provide for high trnsmission of light in the forwrd direction nd strong ttenution of light trveling in the reverse direction. Designed specificlly for hrsh, industril environments, n integrted bem expnding telescope ssures excellent bem-pointing stbility nd bem qulity, which is required to ssure high qulity mrking nd engrving. Benefits: Rugged, environmentlly hrdened ssembly ssures limited down time for mrking systems due to lser problems Miniml bem distortion results in cler, distinct prt mrking Specifictions : Prt Number Fiber Types b Mximum Incident Averge Power Center Wvelength Contct EOT Product specifictions re subject to chnge. b Stndrd fiber length is 3 m, protective Teflon tubing length is 2.15 m in 2 m rmor cble jcket. Customers should contct EOT regrding other fiber requirements. c Unless otherwise specified by customer d Insertion loss of light through fiber cldding is not included in the insertion loss specifiction. e Cse temperture 50 C Note: All products re RoHS complint. ** It is recommended tht the isoltor be ttched to the lser enclosure using compression fitting tht secures only the outer, metl reinforced jcket. The inner PTFE tube is ment s n brsion brrier for the opticl fiber nd should be llowed to move freely with the fiber. 70 W 1065 nm ± 15 nm M 2 Degrdtion <10% Stndrd Output Bem Dimeter (1/e 2 ) c Insertion Loss of light through fiber core d Isoltion t 10 C - 50 C Isoltion t 30 C Return Loss Reverse Power Hndling e Mximum Pulse Energy Pek Power Fetures: 3 mm, 5 mm, 7.5 mm, 10 mm <0.5 db >20 db >27 db <-50 db 77 W for 90 s mx. 1 mj 20 kw Operting Temperture 10 C - 50 C Storge Temperture -10 C - 70 C Storge Humidity, non-condensing 10% - 90% Criticl components re designed to minimize return loss which cn degrde lser performnce Proper steering nd het sinking of bckwrd trveling light ssures isoltor performnce does not degrde over time due to heting Protective rmor cbling for fiber is stndrd U.S. Ptent 7,306,376; other ptents pplied for (800) Fx: (231) sles@eotech.com (01/17/2018)

24 EOT 70 W Fiber Lser Isoltor Dimensions : All dimensions in millimeters (800) Fx: (231) sles@eotech.com (01/17/2018)

25 EOT 100 W Fiber Lser Isoltor EOT s 100 W Fiber Lser Isoltors hve been specificlly designed for pulsed Yb Fiber Lsers used in mrking nd engrving pplictions. Mrking nd engrving of highly reflective metls cn result in lrge levels of bck reflection, creting the potentil for non-optiml performnce of the lser or even dmge to the lser. This cn result in uncceptble mrking qulity nd significnt down time. Utilizing high dmge threshold optics, these isoltors provide for high trnsmission of light in the forwrd direction nd strong ttenution of light trveling in the reverse direction. Designed specificlly for hrsh, industril environments, n integrted bem expnding telescope ssures excellent bem-pointing stbility nd bem qulity, which is required to ssure high qulity mrking nd engrving. Benefits: Rugged, environmentlly hrdened ssembly ssures limited down time for mrking systems due to lser problems Miniml bem distortion results in cler, distinct prt mrking High verge power for fster processing speeds Specifictions : Prt Number Fiber Types b Mximum Incident Averge Power Center Wvelength Contct EOT 100 W 1065 nm ± 15 nm M 2 Degrdtion <10% Stndrd Output Bem Dimeter (1/e 2 ) c Insertion Loss of light through fiber core d Isoltion t 10 C - 50 C Isoltion t 30 C Return Loss Reverse Power Hndling e Mximum Pulse Energy Pek Power Fetures: 3 mm, 5 mm, 7.5 mm, 10 mm <0.5 db >20 db >27 db <-50 db 77 W for 90 s mx. 1.1 mj 20 kw Operting Temperture 10 C - 50 C Storge Temperture -10 C - 70 C Storge Humidity, non-condensing 10% - 90% Criticl components re designed to minimize return loss which cn degrde lser performnce Proper steering nd het sinking of bckwrd trveling light ssures isoltor performnce does not degrde over time due to heting Protective rmor cbling for fiber is stndrd U.S. Ptent 7,306,376; other ptents pplied for Product specifictions re subject to chnge. b Stndrd fiber length is 3 m, protective Teflon tubing length is 2.15 m in 2 m rmor cble jcket. Customers should contct EOT regrding other fiber requirements. c Unless otherwise specified by customer d Insertion loss of light through fiber cldding is not included in the insertion loss specifiction. e Cse temperture 50 C Note: All products re RoHS complint. ** It is recommended tht the isoltor be ttched to the lser enclosure using compression fitting tht secures only the outer, metl reinforced jcket. The inner PTFE tube is ment s n brsion brrier for the opticl fiber nd should be llowed to move freely with the fiber. (800) Fx: (231) sles@eotech.com (04/09/2018)

26 EOT 100 W Fiber Lser Isoltor Dimensions : All dimensions in millimeters (800) Fx: (231) sles@eotech.com (04/09/2018)

Extended InGaAs Photodiodes IG26-Series

Extended InGaAs Photodiodes IG26-Series Description The IG26series is pnchromtic PIN photodiode with nominl wvelength cutoff t 2.6 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt

More information

Regular InGaAs Photodiodes IG17-Series

Regular InGaAs Photodiodes IG17-Series Description The IG7series is pnchromtic PIN photodiode with nominl wvelength cutoff t.7 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt resistnce

More information

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION

Exercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You

More information

CHAPTER 3 AMPLIFIER DESIGN TECHNIQUES

CHAPTER 3 AMPLIFIER DESIGN TECHNIQUES CHAPTER 3 AMPLIFIER DEIGN TECHNIQUE 3.0 Introduction olid-stte microwve mplifiers ply n importnt role in communiction where it hs different pplictions, including low noise, high gin, nd high power mplifiers.

More information

OPERATING INSTRUCTION

OPERATING INSTRUCTION -2 AUTOMATIC POLARIMETER OPERATING INSTRUCTION Plese red through these operting instruction before using MRC.VER.01-. CONTENTS I. APPLICATIONS.1 II. III. IV. PERFORMANCE 1 CONSTRUCTION AND PRINCIPLE 2

More information

Connection Technology

Connection Technology Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *

More information

2N6071A/B Series. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V

2N6071A/B Series. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V Preferred Device Sensitive Gte Trics Silicon Bidirectionl Thyristors Designed primrily for full-wve AC control pplictions, such s light dimmers, motor controls, heting controls nd power supplies; or wherever

More information

Features. Ordering and Marking Information. P-Channel Enhancement Mode MOSFET -30V/-7A, R DS(ON) = V GS. =-10V = 60mW(max.

Features. Ordering and Marking Information. P-Channel Enhancement Mode MOSFET -30V/-7A, R DS(ON) = V GS. =-10V = 60mW(max. P-Chnnel Enhncement Mode MOSFET Fetures -3V/-7A, = 38mW(mx.) @ V GS =-V = 6mW(mx.) @ V GS =-4.5V % UIS + R g Tested Relible nd Rugged Led Free nd Green Devices Avilble (RoHS Complint) HBM ESD protection

More information

Optical Isolator Tutorial (Page 1 of 2) νlh, where ν, L, and H are as defined below. ν: the Verdet Constant, a property of the

Optical Isolator Tutorial (Page 1 of 2) νlh, where ν, L, and H are as defined below. ν: the Verdet Constant, a property of the Aspheric Optical Isolator Tutorial (Page 1 of 2) Function An optical isolator is a passive magneto-optic device that only allows light to travel in one direction. Isolators are used to protect a source

More information

PB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars

PB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best

More information

2N6071A/B Series. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V

2N6071A/B Series. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V Preferred Device Sensitive Gte Trics Silicon Bidirectionl Thyristors Designed primrily for full wve AC control pplictions, such s light dimmers, motor controls, heting controls nd power supplies; or wherever

More information

Faraday Rotators and Isolators

Faraday Rotators and Isolators Faraday Rotators and I. Introduction The negative effects of optical feedback on laser oscillators and laser diodes have long been known. Problems include frequency instability, relaxation oscillations,

More information

DP400 / DM350. Inverter. Total Solutions from the Single Source Provider DP400 PULSED MAG - PULSED MIG CO2 - MAG - MIG - FCAW

DP400 / DM350. Inverter. Total Solutions from the Single Source Provider DP400 PULSED MAG - PULSED MIG CO2 - MAG - MIG - FCAW DP400 / DM350 Digitl Controlled DC Inverter Arc Welding Mchines CAT. NO. A446 Simple Opertion Perfect Welds from Arc Strt to End Inverter Totl Solutions from Single Source Provider DP400 PULSED MAG - PULSED

More information

ARRIS Optical Passives and Accessories

ARRIS Optical Passives and Accessories ARRIS nd Accessories Solution Overview FEATURES Full line of opticl pssives nd ccessories High stbility High relibility SOLUTION OVERVIEW ARRIS offers complete line of DWDMs, CWDMs, WDMs, Couplers, nd

More information

Extremely small "footprint" and the highest circuit density available AK550. Front Wire Entry

Extremely small footprint and the highest circuit density available AK550. Front Wire Entry FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers

More information

Power rating at 80 C watts R0005 ohms R0006 to R01. R001 to R01 Power. to R015. (mω) 1 0.2, 0.25, 0.3, 0.

Power rating at 80 C watts R0005 ohms R0006 to R01. R001 to R01 Power. to R015. (mω) 1 0.2, 0.25, 0.3, 0. Resistors Metl Strip Current Sense Resistors Surfce Mount Resistors Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Resistnce R000 (m ) to R0 (m ) Metl UR Robust

More information

Efficient source of femtosecond pulses and its use for broadband supercontinuum generation

Efficient source of femtosecond pulses and its use for broadband supercontinuum generation Quntum Electronics 35 (7) 581-585 (25) 25 Kvntovy Elektronik nd Turpion Ltd LASERS Efficient source of femtosecond pulses nd its use for brodbnd supercontinuum genertion PACS numbers: 42.55.Wd; 42.65.Re

More information

1, 1.5, 2, 2.5, , 0.75, 1, 1.5, , 3, , 4.5, 5, 5.5, , 4.5, 0.5, 5, , , 6.

1, 1.5, 2, 2.5, , 0.75, 1, 1.5, , 3, , 4.5, 5, 5.5, , 4.5, 0.5, 5, , , 6. Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Resistors Element UR Series UR Series Current Metl Resistor Element Resistnce

More information

Engineer-to-Engineer Note

Engineer-to-Engineer Note Engineer-to-Engineer Note EE-297 Technicl notes on using Anlog Devices DSPs, processors nd development tools Visit our Web resources http://www.nlog.com/ee-notes nd http://www.nlog.com/processors or e-mil

More information

Experiment 3: Non-Ideal Operational Amplifiers

Experiment 3: Non-Ideal Operational Amplifiers Experiment 3: Non-Idel Opertionl Amplifiers 9/11/06 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output

More information

Experiment 3: Non-Ideal Operational Amplifiers

Experiment 3: Non-Ideal Operational Amplifiers Experiment 3: Non-Idel Opertionl Amplifiers Fll 2009 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output

More information

Ultra Low Cost ACCELEROMETER

Ultra Low Cost ACCELEROMETER Chip Scle Pckged Digitl Therml Orienttion Sensing Accelerometer MXC6226XC Document Version D Pge 1 of 13 Fetures Generl Description Fully Integrted Therml Accelerometer X/Y Axis, 8 bit, Accelertion A/D

More information

Understanding Basic Analog Ideal Op Amps

Understanding Basic Analog Ideal Op Amps Appliction Report SLAA068A - April 2000 Understnding Bsic Anlog Idel Op Amps Ron Mncini Mixed Signl Products ABSTRACT This ppliction report develops the equtions for the idel opertionl mplifier (op mp).

More information

Design and Modeling of Substrate Integrated Waveguide based Antenna to Study the Effect of Different Dielectric Materials

Design and Modeling of Substrate Integrated Waveguide based Antenna to Study the Effect of Different Dielectric Materials Design nd Modeling of Substrte Integrted Wveguide bsed Antenn to Study the Effect of Different Dielectric Mterils Jgmeet Kour 1, Gurpdm Singh 1, Sndeep Ary 2 1Deprtment of Electronics nd Communiction Engineering,

More information

Rectangular type APS-10 to 15 Series

Rectangular type APS-10 to 15 Series Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting

More information

MEASURE THE CHARACTERISTIC CURVES RELEVANT TO AN NPN TRANSISTOR

MEASURE THE CHARACTERISTIC CURVES RELEVANT TO AN NPN TRANSISTOR Electricity Electronics Bipolr Trnsistors MEASURE THE HARATERISTI URVES RELEVANT TO AN NPN TRANSISTOR Mesure the input chrcteristic, i.e. the bse current IB s function of the bse emitter voltge UBE. Mesure

More information

Ultra Low Cost ACCELEROMETER

Ultra Low Cost ACCELEROMETER Chip Scle Pckged Fully Integrted Therml Accelerometer MXC622xXC Rev,A 8/19/2011 Pge 1 of 13 Fetures Generl Description Fully Integrted Therml Accelerometer X/Y Axis, 8 bit, Accelertion A/D Output (± 2g)

More information

Reversible and Proportional Electric Actuators

Reversible and Proportional Electric Actuators Reversible nd Proportionl Electric s The MP s re used for two-position, floting, nd proportionl control of dmpers, vlves, nd progrm switches in heting, ventiltion, nd ir conditioning pplictions or similr

More information

Series AE W PFC INDUSTRIAL POWER SUPPLY

Series AE W PFC INDUSTRIAL POWER SUPPLY FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry

More information

Time-resolved measurements of the response of a STM tip upon illumination with a nanosecond laser pulse

Time-resolved measurements of the response of a STM tip upon illumination with a nanosecond laser pulse Appl. Phys. A 66, 65 69 (998) Applied Physics A Mterils Science & Processing Springer-Verlg 998 Time-resolved mesurements of the response of STM tip upon illumintion with nnosecond lser pulse J. Boneerg,

More information

On/off valves with spool position monitoring

On/off valves with spool position monitoring On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,

More information

JUMO Wtrans B Programmable Head Transmitter with Radio Transmission

JUMO Wtrans B Programmable Head Transmitter with Radio Transmission Dt Sheet 707060 Seite 1/10 JUMO Wtrns B Progrmmble Hed Trnsmitter with Rdio Trnsmission Brief description The Wtrns B hed trnsmitter with wireless dt trnsmission is used in connection with Wtrns receiver

More information

Package Code. K : SOP-8 Operating Junction Temperature Range C : -55 to 150 o C Handling Code TR : Tape & Reel. Handling Code Temperature Range

Package Code. K : SOP-8 Operating Junction Temperature Range C : -55 to 150 o C Handling Code TR : Tape & Reel. Handling Code Temperature Range N-Chnnel Enhncement Mode MOSFET Fetures 30V/A, R DS(ON) = 16mW(mx.) @ V GS = V R DS(ON) = 22mW(mx.) @ V GS = 4.5V 0% UIS + R g Tested Relible nd Rugged Led Free nd Green Devices Avilble (RoHS Complint)

More information

WL Photonics Inc. Leading Provider of Fiber Optic Wavelength Tuning and Conditioning Solutions

WL Photonics Inc. Leading Provider of Fiber Optic Wavelength Tuning and Conditioning Solutions Faraday Optical Isolator FI-PS-, FI-PI- & FI-BP- Faraday optical isolators of FI- series are built with the superior materials of large Verdet constant, high thermal conductivity, low absorption coefficient

More information

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts 2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New

More information

FATIGUE BEHAVIOUR OF COMPOSITE JOINTS WITH HEXAGON BOLTS

FATIGUE BEHAVIOUR OF COMPOSITE JOINTS WITH HEXAGON BOLTS FATIGUE BEHAVIOUR OF COMPOSITE JOINTS WITH HEXAGON BOLTS Romn Strikov nd Jokim Schön Deprtment of Aeronutics, Royl Institute of Technology SE-1 44 Stockholm, Sweden Structures nd Mterils Deprtment, Aeronutics

More information

Products no longer available

Products no longer available echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck

More information

PRELIMINARY 9-SPOT SPECIFICATION. RoHS COMPLIANT RGB COLOR CHANGING IP67 IK07

PRELIMINARY 9-SPOT SPECIFICATION. RoHS COMPLIANT RGB COLOR CHANGING IP67 IK07 SPECIFICTION Line voltage LED, High Performance Facade and Flood Lighting Ideal for lighting facades, structures, bridges Industry leading center beam candlepower with optics Integral power (line voltage

More information

Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7

Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7 RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø

More information

1 Power supply. Contents

1 Power supply. Contents /0 Te Power supply Contents Power supplies Selection guide pges /2 nd /3 nd trnsformers - presenttion nd selection pge/4 to /3 Phseo switchmode supplies pge /4 Filtered rectified power supplies pge /4

More information

Carbon Composition Resistors

Carbon Composition Resistors Dimensions Cron Composition Resistors Rtings nd Dimensions Type L Specifiction Limit nd Performnce d D Derting Curve 8 6 4 (/, w) Test procedures, sequence of test, etc., refer to MIL-STD D nd JIS-C-5.

More information

DIN ANSI Shark Line Material specific application taps. New products 2017

DIN ANSI Shark Line Material specific application taps. New products 2017 DIN ANSI Shrk Line Mteril specific ppliction tps New products 2017 SHARK LINE SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security.

More information

Design And Implementation Of Luo Converter For Electric Vehicle Applications

Design And Implementation Of Luo Converter For Electric Vehicle Applications Design And Implementtion Of Luo Converter For Electric Vehicle Applictions A.Mnikndn #1, N.Vdivel #2 ME (Power Electronics nd Drives) Deprtment of Electricl nd Electronics Engineering Sri Shkthi Institute

More information

Controls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution

Controls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution Controls Solid-Stte Switching Devices Reference Mnul April 2009 Low-Voltge Controls nd Distribution Controls Solid-Stte Switching Devices 4 Introduction Solid-Stte Switching Devices 5 Generl dt Solid-Stte

More information

Application Note. Differential Amplifier

Application Note. Differential Amplifier Appliction Note AN367 Differentil Amplifier Author: Dve n Ess Associted Project: Yes Associted Prt Fmily: CY8C9x66, CY8C7x43, CY8C4x3A PSoC Designer ersion: 4. SP3 Abstrct For mny sensing pplictions, desirble

More information

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type) ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In

More information

Quantum limited noise figure operation of high gain erbium doped fiber amplifiers

Quantum limited noise figure operation of high gain erbium doped fiber amplifiers Downloded from orbit.dtu.dk on: Dec 17, 2017 Quntum limited noise figure opertion of high gin erbium doped fiber mplifiers Lumholt, Ole; Povlsen, Jørn Hedegrd; Schüsler, Kim; Bjrklev, Anders Overgrd; Dhl-Petersen,

More information

Highlights. Opto Proximity Switches. Introduction. Opto proximity switches fast and accurate sensing with light and laser PXO100

Highlights. Opto Proximity Switches. Introduction. Opto proximity switches fast and accurate sensing with light and laser PXO100 Opto proximity switches fst nd ccurte sensing with light nd lser Configurtor A configurtor for opticl proximity switches is vilble in the A&D Mll. Bsed on the technicl fetures required, the desired product

More information

Simulation of Transformer Based Z-Source Inverter to Obtain High Voltage Boost Ability

Simulation of Transformer Based Z-Source Inverter to Obtain High Voltage Boost Ability Interntionl Journl of cience, Engineering nd Technology Reserch (IJETR), olume 4, Issue 1, October 15 imultion of Trnsformer Bsed Z-ource Inverter to Obtin High oltge Boost Ability A.hnmugpriy 1, M.Ishwry

More information

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

Engineer-to-Engineer Note

Engineer-to-Engineer Note Engineer-to-Engineer Note EE-236 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our

More information

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501. Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple

More information

In mm CW PK LT-AX18A EB01 LT-AX18B EB02. Eleading Technologies Ltd.

In mm CW PK LT-AX18A EB01 LT-AX18B EB02. Eleading Technologies Ltd. Reflective Limiter Electricl Specifictions Prt Number Power Rting Frequency Insertion Loss Limiting Level VSWR Outline Drwing (w)mx Rnge (GHz) (db)mx (mw)mx (I/O)mx In mm CW PK LT-AX18A 6-18 2.5 30 2.0

More information

MBR7030WTG. Switch Mode Power Rectifier SCHOTTKY BARRIER RECTIFIER 70 AMPERES, 30 VOLTS

MBR7030WTG. Switch Mode Power Rectifier SCHOTTKY BARRIER RECTIFIER 70 AMPERES, 30 VOLTS Switch Mode Power Rectifier The Switch Mode power rectifier, a state of the art device, employs the use of the Schottky Barrier principle with a Platinum barrier metal. Features Dual Diode Construction;

More information

5 I. T cu2. T use in modem computing systems, it is desirable to. A Comparison of Half-Bridge Resonant Converter Topologies

5 I. T cu2. T use in modem computing systems, it is desirable to. A Comparison of Half-Bridge Resonant Converter Topologies 74 EEE TRANSACTONS ON POER ELECTRONCS, VOL. 3, NO. 2, APRL 988 A Comprison of Hlf-Bridge Resonnt Converter Topologies Abstrct-The hlf-bridge series-resonnt, prllel-resonnt, nd combintion series-prllel

More information

Diffraction and Interference. 6.1 Diffraction. Diffraction grating. Diffraction grating. Question. Use of a diffraction grating in a spectrometer

Diffraction and Interference. 6.1 Diffraction. Diffraction grating. Diffraction grating. Question. Use of a diffraction grating in a spectrometer irction nd Intererence 6.1 irction irction grting Circulr dirction irction nd intererence re similr phenomen. Intererence is the eect o superposition o 2 coherent wves. irction is the superposition o mny

More information

Ultrasonic Level Measurement DU 60 Z and DU 61 Z Sensors

Ultrasonic Level Measurement DU 60 Z and DU 61 Z Sensors Technicl Informtion TI 9F//en Ultrsonic Level Mesurement DU 6 Z nd DU 6 Z Sensors Modulr design, corrosion-resistnt Approved for explosion hzrdous res DU 6 Z Mesuring rnge pprox. m DU 6 Z Mesuring rnge

More information

All-optical busbar differential protection scheme for electric power systems

All-optical busbar differential protection scheme for electric power systems All-opticl usr differentil protection scheme for electric power systems M Nsir +, A Dysko, P. Niewczs, G Fusiek Institute for Energy nd Environment, Electronic nd Electricl Enginering Deprtment. University

More information

High Speed On-Chip Interconnects: Trade offs in Passive Termination

High Speed On-Chip Interconnects: Trade offs in Passive Termination High Speed On-Chip Interconnects: Trde offs in Pssive Termintion Rj Prihr University of Rochester, NY, USA prihr@ece.rochester.edu Abstrct In this pper, severl pssive termintion schemes for high speed

More information

Geometric quantities for polar curves

Geometric quantities for polar curves Roerto s Notes on Integrl Clculus Chpter 5: Bsic pplictions of integrtion Section 10 Geometric quntities for polr curves Wht you need to know lredy: How to use integrls to compute res nd lengths of regions

More information

Digital Migration Radio PD60X. DMR Standard Radio, Feature-Rich, Innovative Design, Compact Size, Integrates with Hytera Applications

Digital Migration Radio PD60X. DMR Standard Radio, Feature-Rich, Innovative Design, Compact Size, Integrates with Hytera Applications Digitl Migrtion Rdio PD60X DMR Stndrd Rdio, Feture-Rich, Innovtive Design, Compct Size, Integrtes with Applictions Fetures Smll, Sleek, Light Full Bnd The size is 119 X 54 X 27mm, PC & Metl frme, weight

More information

CHAPTER 2 LITERATURE STUDY

CHAPTER 2 LITERATURE STUDY CHAPTER LITERATURE STUDY. Introduction Multipliction involves two bsic opertions: the genertion of the prtil products nd their ccumultion. Therefore, there re two possible wys to speed up the multipliction:

More information

TOP VIEW 4 C BLOCK. Maxim Integrated Products 1

TOP VIEW 4 C BLOCK. Maxim Integrated Products 1 19-113; Rev 1; 8/3 EVLUTION KIT VILBLE DC-to-Microwave, +V Low-Noise mplifier General Description The is a low-noise amplifier for use from DC to microwave frequencies. Operating from a single +V supply,

More information

Arduino for Model Railroaders

Arduino for Model Railroaders Steve Mssikker Arduino for Model Rilroders Ornge Book Protocol 2 Full Description November 28 Tble of contents Dontors Documenttion Kit V.4-8 Pge 2 I wnt to tke the time to sincerely thnk you for your

More information

Array chip resistors size ARC241/ARC242 ARV241/ARV242

Array chip resistors size ARC241/ARC242 ARV241/ARV242 Arry chip resistors FEATURES 4 0603 sized resistors in one 1206-sized pckge Reduced reel exchnge time Low ssembly costs Reduced PCB re Reduced size of finl equipment Higher component nd equipment relibility.

More information

Effect of High-speed Milling tool path strategies on the surface roughness of Stavax ESR mold insert machining

Effect of High-speed Milling tool path strategies on the surface roughness of Stavax ESR mold insert machining IOP Conference Series: Mterils Science nd Engineering PAPER OPEN ACCESS Effect of High-speed Milling tool pth strtegies on the surfce roughness of Stvx ESR mold insert mchining Relted content - Reserch

More information

Study on SLT calibration method of 2-port waveguide DUT

Study on SLT calibration method of 2-port waveguide DUT Interntionl Conference on Advnced Electronic cience nd Technology (AET 206) tudy on LT clibrtion method of 2-port wveguide DUT Wenqing Luo, Anyong Hu, Ki Liu nd Xi Chen chool of Electronics nd Informtion

More information

Fitting & User Instructions

Fitting & User Instructions Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising

More information

Passive and Active Hybrid Integrated EMI Filters

Passive and Active Hybrid Integrated EMI Filters Pssive nd Active Hybrid Integrted EMI Filters J. Biel, A. Wirthmueller, R. Wespe, M.. Heldwein, J. W. Kolr Power Electronic Systems bortory Swiss Federl Institute of Technology Zurich, Switzerlnd Emil:

More information

ZTR250 ZTR500 FIXED 2.5 AND 5 VOLT 3-TERMINAL VOLTAGE REFERENCES ISSUE 4 - MARCH 1998 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM

ZTR250 ZTR500 FIXED 2.5 AND 5 VOLT 3-TERMINAL VOLTAGE REFERENCES ISSUE 4 - MARCH 1998 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM FIXED 2.5 AND 5 VOLT 3-TERMINAL VOLTAGE REFERENCES ISSUE 4 - MARCH 1998 Plese Use ZMR Series ZTR25 ZTR5 DEVICE DESCRIPTION The ZTR25 nd ZTR5 re precision three terminl references. These devices re idel

More information

DIN/ANSI Shark Line Material Specific Application Taps. New Products 2017

DIN/ANSI Shark Line Material Specific Application Taps. New Products 2017 DIN/ANSI Shrk Line Mteril Specific Appliction Tps New Products 2017 SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security. Shrk Line

More information

Pro Series White Toner and Neon Range

Pro Series White Toner and Neon Range Pro Series White Toner nd Neon Rnge Discover New Dimension in Colour printing for grment decortion, signge nd design Pro7411WT White Toner (CMYW) A4 printer Pro8432WT White Toner (CMYW) A3 printer Pro6410

More information

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless

More information

Innovative plate solutions for flexographic printing. nyloflex printing plates

Innovative plate solutions for flexographic printing. nyloflex printing plates Innovtive plte solutions for flexogrphic printing nyloflex printing pltes nyloflex Printing Pltes Unique nd comprehensive expertise in flexogrphic printing Printing pltes from Flint Group to meet every

More information

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge

More information

Synchronous Machine Parameter Measurement

Synchronous Machine Parameter Measurement Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions

More information

''Violet'' drill series.

''Violet'' drill series. 0. Updte B00G NEW SIZES VA-PDS VA-PDM VIOLET SERIES, HIGH PRECISION DRILLS VA-PDS VA-PDM VA-PDS-SUS VA-PDM-SUS A new stndrd for high precision drills! ''Violet'' drill series. Stble, long life Consistent

More information

High-Voltage, High-Current DUAL OPERATIONAL AMPLIFIER

High-Voltage, High-Current DUAL OPERATIONAL AMPLIFIER High-Voltage, High-Current DUL OPERTIONL MPLIFIER FETURES HIGH OUTPUT CURRENT: min WIDE POWER SUPPLY RNGE: ±V to ±3V SLEW RTE: 8V/µs INTERNL CURRENT LIMIT THERML SHUTDOWN PROTECTION FET INPUT: I = p max

More information

SUPER-QUIET XENON FLASH LAMP SERIES

SUPER-QUIET XENON FLASH LAMP SERIES SUPER-QUIET XENON FSH MP SERIES ppliction Exmples Medicl nlysis, environmentl nlysis iologicl reserch F (Fctory utomtion) Exmple: lood nlyzer XENON FSH MP SMPE OOD FUORESCENT FITER CONDENSER ENS HIGH SENSITIVITY

More information

The Discussion of this exercise covers the following points:

The Discussion of this exercise covers the following points: Exercise 4 Bttery Chrging Methods EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the different chrging methods nd chrge-control techniques commonly used when chrging Ni-MI

More information

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your

From Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL

More information

Fusible Thin Film Chip Resistor

Fusible Thin Film Chip Resistor Fusile Thin Film Chip Resistor M25SI fusile thin film chip resistors re designed for overlod protection in modern professionl electronics. Typicl pplictions include utomotive, telecommuniction nd industril

More information

NP10 DIGITAL MULTIMETER Functions and features of the multimeter:

NP10 DIGITAL MULTIMETER Functions and features of the multimeter: NP10 DIGITL MULTIMETER. unctions nd fetures of the multimeter: 1000 V CT III tri requencies from 10.00...10 M. Diode mesurement nd continuity testing. HOLD mesurement. Reltive mesurement. Duty cycle (%)

More information

YIG filters. P. Röschmann

YIG filters. P. Röschmann 322 Philips tech. Rev. 32,322-327, 1971, No. 9/10/11/12 YIG filters P. Röschmnn Introduetion A new group of microwve ferrite components hve ttrcted good del of ttention in recent yers becuse of their unique

More information

LEDs FOR LIGHTING APPLICATIONS

LEDs FOR LIGHTING APPLICATIONS 07.Oct. STOCK CODE: 00449 SINCE 969 SINCE 969 LEDs FOR LIGHTING PPLICTIONS FOSHN NTIONSTR OPTOELECTRONICS CO.,LTD dd: No.8 South Huo Rod, Chncheng District, Foshn,Gungdong,P.R.Chin Tel: 0086-757-8003 80038

More information

MSRS90. Hi efficiency Notched and No-hand insert for MSRS90

MSRS90. Hi efficiency Notched and No-hand insert for MSRS90 MGCO MR90 Multiple Cutter i efficiency Notched nd Nohnd insert for MR90 1Notched insert reduces cutting force reduction t the first pss tle mchining without chtter 2mooth chip evcution Prevents frcture

More information

Anti-Surge Thick Film Chip Resistors Rtings ERJP3 (63) (63) ERJP6 ERJP8 (26) ERJP4 (2) Power Rting (3) t 7 C (W) Element Voltge () Mximum Overlod Volt

Anti-Surge Thick Film Chip Resistors Rtings ERJP3 (63) (63) ERJP6 ERJP8 (26) ERJP4 (2) Power Rting (3) t 7 C (W) Element Voltge () Mximum Overlod Volt Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Re sis tors 63, 85, 26, 2 : ERJ P3, PA3, P6, P8, P4 Fetures ESD surge chrcteristics superior to stndrd metl fi lm resistors High relibility

More information

Comparison of beam wander correction by quadrant and ideal detectors for aerial quantum communication links

Comparison of beam wander correction by quadrant and ideal detectors for aerial quantum communication links MSc in Photonics Universitt Politècnic de Ctluny (UPC) Universitt Autònom de Brcelon (UAB) Universitt de Brcelon (UB) Institut de Ciències Fotòniques (ICFO) PHOTONICSBCN http://www.photonicsbcn.eu Mster

More information

SPX Offers low cutting resistance for heavy machining & deep shoulder milling

SPX Offers low cutting resistance for heavy machining & deep shoulder milling Shell type ddition! 010. Updte B111G Indexble End ill for Deep Shoulder illing Offers low cutting resistnce for hevy mchining & deep shoulder milling y Wvy cutting edge geometry breker breks the chips

More information

SPECTRAL BEHAVIOR OF LONG WAVELENGTH VCSELs

SPECTRAL BEHAVIOR OF LONG WAVELENGTH VCSELs SPECTRAL BEHAVIOR OF LONG WAVELENGTH VCSELs Alexndre Bcou, Angélique Rissons nd Jen-Clude Mollier Université de Toulouse - ISAE, 10 Avenue Edourd Belin BP 54032, 31055 Toulouse Cedex 4, Frnce ABSTRACT

More information

Three-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator)

Three-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator) Three-Phse Synchronous Mchines The synchronous mchine cn be used to operte s: 1. Synchronous motors 2. Synchronous genertors (Alterntor) Synchronous genertor is lso referred to s lterntor since it genertes

More information

Engineer To Engineer Note

Engineer To Engineer Note Engineer To Engineer Note EE-68 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit our

More information

Ch13 INTRODUCTION TO NUMERICAL TECHNIQUES FOR NONLINEAR SUPERSONIC FLOW

Ch13 INTRODUCTION TO NUMERICAL TECHNIQUES FOR NONLINEAR SUPERSONIC FLOW Ch13 INTRODUCTION TO NUMERICAL TECHNIQUES FOR NONLINEAR SUPERSONIC FLOW Goerning Eqtions for Unste Iniscid Compressible Flow Eler's eqtion Stte eqtions finite-difference nmericl techniqes Goerning Eqtions

More information

MBRD620CTG Series, NRVBD640CTG Series. Switch Mode Power Rectifiers. DPAK 3 Surface Mount Package SCHOTTKY BARRIER RECTIFIERS 6.0 AMPERES, VOLTS

MBRD620CTG Series, NRVBD640CTG Series. Switch Mode Power Rectifiers. DPAK 3 Surface Mount Package SCHOTTKY BARRIER RECTIFIERS 6.0 AMPERES, VOLTS MBRD62CTG Series, NRVBD64CTG Series Switch Mode Power Rectifiers DPK 3 Surface Mount Package These state of the art devices are designed for use in switching power supplies, inverters and as free wheeling

More information

* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP

* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP * MXIMUM TURNING SPCE IS 2.0% IN ECH DIRECTION OF TRVEL. MINIMUM DIMENSIONS 5' x 5'. SEE NOTES. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). SEE NOTES. "NON-WLKING" RE * TURNING SPCE 24"

More information

Technical Note 7. General Introduction. Holy Stone

Technical Note 7. General Introduction. Holy Stone Generl Introdution Tehnil Note 7 The Multilyer Cermi Chip Cpitors supplied in bulk, ssette or tped & reel pkge re idelly suitble for thik-film Hybrid iruits nd utomti surfe mounting on printed iruit bords.

More information

EET 438a Automatic Control Systems Technology Laboratory 5 Control of a Separately Excited DC Machine

EET 438a Automatic Control Systems Technology Laboratory 5 Control of a Separately Excited DC Machine EE 438 Automtic Control Systems echnology bortory 5 Control of Seprtely Excited DC Mchine Objective: Apply proportionl controller to n electromechnicl system nd observe the effects tht feedbck control

More information

Robustness Analysis of Pulse Width Modulation Control of Motor Speed

Robustness Analysis of Pulse Width Modulation Control of Motor Speed Proceedings of the World Congress on Engineering nd Computer Science 2007 WCECS 2007, October 24-26, 2007, Sn Frncisco, USA obustness Anlysis of Pulse Width Modultion Control of Motor Speed Wei Zhn Abstrct

More information

Three-Phase High Frequency AC Conversion Circuit with Dual Mode PWM/PDM Control Strategy for High Power IH Applications

Three-Phase High Frequency AC Conversion Circuit with Dual Mode PWM/PDM Control Strategy for High Power IH Applications Interntionl Journl of Electricl nd Electronics Engineering 3: 009 hree-phse High Frequency AC Conversion Circuit with Dul Mode /PDM Control Strtegy for High Power IH Applictions Nbil A. Ahmed Abstrct his

More information