5V/3.3V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER
|
|
- Conrad Phelps
- 5 years ago
- Views:
Transcription
1 V/.V VARIABLE OUTPUT SWING IFFERENTIAL RECEIVER FEATURES ESCRIPTION.V and V power supply options High bandwidth output transitions Internal 7KΩ pull-down resistors on inputs Functionally equivalent to SY100EL1V with variable output swing Improved output waveform characteristics Available in 8-pin SOIC and 8-pin (mm) MSOP The are differential receivers with variable output swing. The devices are functionally equivalent to the EL1V devices with an input that control the amplitude of the outputs. The operational range of the EL1VS control input is from VBB (max. swing) to VCC (min. swing). Simple control of the output swing can be obtained by a variable resistor between the VBB pin and VCC with the wiper driving. The EL1VS provides a VBB output for either singleended use or as a C bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL1VS as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01µF capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the output LOW. PIN NAMES Pin VBB Function ata Inputs ata Outputs Reference Voltage Output Output Swing Control TYPICAL VOLTAGE OUTPUT SWING VOLTAGE SWING (%) C C C V CC V CTRL Figure 1. Typical Voltage Output Swing VCC =.V or V 1 Rev.: E Amendment: /0 Issue ate: August 007
2 PACKAGE/ORERING INFORMATION Ordering Information (1) V CTRL 1 8 V CC / V BB 7 / V EE 8-Pin SOIC and 8-PinMSOP Package Operating Package Lead Part Number Type Range Marking Finish KC K8-1 Commercial XLEL1VS Sn-Pb KCTR () K8-1 Commercial XLEL1VS Sn-Pb ZC Z8-1 Commercial XEL1VS Sn-Pb ZCTR () Z8-1 Commercial XEL1VS Sn-Pb KI K8-1 Industrial XLEL1VS Sn-Pb KITR () K8-1 Industrial XLEL1VS Sn-Pb ZI Z8-1 Industrial XEL1VS Sn-Pb ZITR () Z8-1 Industrial XEL1VS Sn-Pb KG () K8-1 Industrial XLEL1VS with Pb-Free KGTR (, ) K8-1 Industrial XLEL1VS with Pb-Free ZG () Z8-1 Industrial XEL1VS with Pb-Free ZGTR (, ) Z8-1 Industrial XEL1VS with Pb-Free Notes: 1. Contact factory for die availability. ice are guaranteed at T A = C, C Electricals only.. Tape and Reel.. Pb-Free package is recommended for new designs.
3 C ELECTRICAL CHARACTERISTICS (1) VEE = VEE (Min.) to VEE (Max.); VCC = GN TA = 0 C TA = 0 C TA = + C TA = +8 C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit IEE Power Supply Current ma VBB Output Reference V Voltage IIH Input HIGH -, µa Current VOL Output LOW Voltage () mv = VBB VOL Output LOW Voltage () mv = VCC VOH Output HIGH Voltage () mv NOTES: 1. Parametric values specified at: 100EL1VS Series:.0V to.v.. If is an open circuit, use the VOH (max. & min.) and VOL ( = VBB: max only) limits.. VCC VEE. AC ELECTRICAL CHARACTERISTICS (1) VEE = VEE (Min.) to VEE (Max.); VCC = GN TA = 0 C TA = 0 C TA = + C TA = +8 C Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit tplh Propagation (iff) ps tphl elay to Output (SE) tskew uty Cycle Skew () (iff) ps VPP Minimum Input Swing () mv VCMR Common Mode Range () V tr Output Rise/Fall Times ps tf (0% to 80%) NOTES: 1. Parametric values specified at: 100EL1VS Series:.0V to.v.. uty cycle skew is the difference between a tplh and tphl propagation delay through a device.. Minimum input swing for which AC parameters are guaranteed. The device has a C gain of 0 when output has a full swing.. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPP min. and 1V. The lower end of the CMR range varies 1:1 with VEE. The numbers in the spec table assume a nominal VEE =.V. Note for PECL operation, the VCMR (min) will be fixed at.v VCMR (min).
4 APPLICATION IMPLEMENTATION 1 8 VCC VBB 7 VEE 0Ω V 0Ω VSWING (pk-pk) Figure. Voltage Source Implementation +.0V VBB VCC VEE 70Ω VSWING (pk-pk) 70Ω Figure. Alternative Implementation
5 8-PIN MSOP (K8-1)
6 8-PIN SOIC.10" WIE (Z8-1) Rev. 0 MICREL, INC. 180 FORTUNE RIVE SAN JOSE, CA 911 USA TEL + 1 (08) FAX + 1 (08) WEB The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. 00 Micrel, Incorporated.
5V/3.3V DIFFERENTIAL RECEIVER
MicreL, Inc. 5V/3.3V DIFFERENTIAL RECEIVER FEATURES DESCRIPTION 3.3V and 5V power supply options 250ps propagation delay High bandwidth output transitions Internal 75KΩ input pull-down resistors Replaces
More information5V/3.3V QUAD DIFFERENTIAL RECEIVER
5V/3.3V QUAD DIFFERENTIAL RECEIVER FEATURES DESCRIPTION 3.3V and 5V power supply options High bandwidth output transitions Internal 75KΩ input pull down resistors Available in 20-pin SOIC package The is
More information5V/3.3V DUAL DIFFERENTIAL 2:1 MULTIPLEXER
5V/3.3V DUAL DIFFERENTIAL 2:1 MULTIPLEXER FEATURES DESCRIPTION 3.3V and 5V power supply options 440ps propagation delay Separate and common select High bandwidth output transitions Internal 75KΩ input
More informationNOT RECOMMENDED FOR NEW DESIGNS 4:1 DIFFERENTIAL MULTIPLEXER
NOT RECOMMENDED FOR NEW DESIGNS Micrel, Inc. 4:1 DIFFERENTIAL MULTIPLEXER FEATURES DESCRIPTION 5V power supply Useful as either 4:1 or 2:1 multiplexer VBB output for single-ended operation 75KΩ internal
More information5V/3.3V 4-INPUT OR/NOR
5V/3.3V 4-INPUT OR/NOR FEATURES 3.3V and 5V power supply options 230ps typical propagation delay High bandwidth to 3GHz 75kΩ internal input pulldown resistors Q output will default LOW with inputs open
More informationCOAXIAL CABLE DRIVER
COAXIAL CABLE RIVER FINAL FEATURES 375ps propagation delay 1.6V output swings Internal 75KΩ input pull-down resistors Available in 8-pin SOIC package PIN CONFIGURATION/BLOCK IAGRAM Q0 Q0 1 8 2 7 VCC ESCRIPTION
More informationDIFFERENTIAL ECL-to-TTL TRANSLATOR
DIFFERENTIAL ECL-to-TTL TRANSLATOR FEATURES DESCRIPTION 2.6ns typical propagation delay Differential ECL inputs 24mA TTL outputs Flow-through pinouts Available in 8-pin SOIC package The is a differential
More information5V/3.3V TTL-TO-DIFFERENTIAL PECL TRANSLATOR
5V/3.3V TTL-TO-DIFFERENTIAL PECL TRANSLATOR FEATURES 3.3V and 5V power supply options 300ps typical propagation delay Low power Differential PECL output PNP TTL input for minimal loading Flow-through pinouts
More information5V/3.3V D FLIP-FLOP WITH RESET AND DIFFERENTIAL CLOCK
5V/3.3V D FLIP-FLOP WITH RESET AND DIFFERENTIAL CLOCK FEATURES 3.3V and 5V power supply options 320ps typical propagation delay Maximum frequency > 3GHz typical 75KΩ internal input pulldown resistor Transistor
More informationNOT RECOMMENDED FOR NEW DESIGNS 5V/3.3V DIFFERENTIAL DATA AND CLOCK D FLIP-FLOP
NOT RECOMMENDED FOR NEW DESIGNS Micrel, Inc. 5V/3.3V DIFFERENTIAL DATA AND CLOCK D FLIP-FLOP FEATURES Guaranteed maximum frequency >4GHz Guaranteed
More information5V/3.3V DIFFERENTIAL 2-INPUT XOR/XNOR
5V/3.3V DIFFERENTIAL 2-INPUT XOR/XNOR FEATURES 3.3V or 5V power supply options Maximum frequency > 3GHz typical 200ps typical propagation delay Internal input resistors: pulldown on D, pulldown and pullup
More information5V/3.3V, 3GHz PECL/LVPECL D FLIP-FLOP WITH SET AND RESET
5V/3.3V, 3GHz PECL/LVPECL D FLIP-FLOP WITH SET AND RESET FEATURES Guaranteed >3GHz bandwidth over temperature Guaranteed
More informationNOT RECOMMENDED FOR NEW DESIGNS
NOT RECOMMENDED FOR NEW DESIGNS 3.3V, DUAL DIFFERENTIAL LVPECL-TO-LVTTL TRANSLATOR FEATURES 3.3V power supply 2.0ns typical propagation delay
More informationLASER DIODE DRIVER WITH OUTPUT ENABLE
LASER IOE RIVER WITH PUT ABLE FEATURES ESCRIPTION Up to 1.25Gbps operation 75mA peak drive current Separate modulation control Separate output enable for laser safety ifferential inputs for data 75KΩ input
More information3.3V DIFFERENTIAL LVPECL-to-LVTTL TRANSLATOR
3.3V DIFFERENTIAL LVPECL-to-LVTTL TRANSLATOR FEATURES 3.3V power supply 2.0ns typical propagation delay Low power Differential LVPECL inputs 24mA TTL outputs Flow-through pinouts Available in 8-pin SOIC
More information5-BIT REGISTERED TRANSCEIVER
5-BIT REGISTERED TRANSCEIVER FEATURES DESCRIPTION 25Ω cut-off bus outputs receiver outputs Transmit and receive registers with separate clocks 1500ps max. delay from CLK1 to Bus Outputs (BUS) 1500ps max.
More information3.3V/5V 2.5GHz PECL/ECL 1:4 FANOUT BUFFER WITH 2:1 INPUT MUX
3.3V/5V 2.5GHz PECL/ECL 1:4 FANOUT BUFFER WITH 2:1 INPUT MUX FEATURES High-speed 1:4 PECL/ECL fanout buffer 2:1 multiplexer input Guaranteed AC parameters over temp/voltage: > 2.5GHz f MAX (toggle) < 225ps
More information3.3V/5V 3GHz PECL/ECL 2:1 MULTIPLEXER
3.3V/5V 3GHz PECL/ECL 2:1 MULTIPLEXER FEATURES 2:1 PECL/ECL multiplexer Guaranteed AC performance over temperature/voltage >3GHz f MAX (toggle)
More information3.3V/5V PECL/ECL 3GHz DUAL DIFFERENTIAL 2:1 MULTIPLEXER
3.3V/5V PECL/ECL 3GHz DUAL DIFFERENTIAL 2:1 MULTIPLEXER FEATURES Dual, fully differential 2:1 PECL/ECL multiplexer Guaranteed AC parameters over temperature/ voltage: > 3GHz f MAX (toggle) < 100ps within
More informationD LATCH. SuperLite SY55853U FEATURES DESCRIPTION FUNCTIONAL BLOCK DIAGRAM APPLICATIONS
D LATCH FEATURES 2.5GHz min f max 2.3V to 5.7V power supply Single bit latch Stores or flows through 1 bit of data Optimized to work with family Fully differential Source terminated CML outputs for fast
More information5V/3.3V 2.5Gbps LASER DIODE DRIVER
5V/3.3V 2.5Gbps LASER DIODE DRIVER FEATURES DESCRIPTION Up to 2.5Gbps operation 30mA modulation current Separate modulation control Separate output enable for laser safety Differential inputs for data
More informationD FLIP-FLOP. SuperLite SY55852U FEATURES DESCRIPTION FUNCTIONAL BLOCK DIAGRAM APPLICATIONS
D FLIP-FLOP FEATURES 2.5GHz min. f MAX 2.3V to 5.7V power supply Single bit register memory Synchronizes 1 bit of data to a clock Optimized to work with family Fully differential Accepts CML, PECL, LVPECL
More informationNOT RECOMMENDED FOR NEW DESIGNS LOW-POWER HEX ECL-to-TTL TRANSLATOR
NOT RECOMMENDED FOR NEW DESIGNS LOW-POWER HEX ECL-to-TTL TRANSLATOR FEATURES DESCRIPTION Max. propagation delay of 3.7ns IEE min. of 37mA TTL outputs Extended supply voltage option: VEE = 4.2V to 5.5V
More information5V/3.3V 622Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE
5V/3.3V 622Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE FEATURES DESCRIPTION Single 3.3V or 5V power supply Up to 622Mbps operation Modulation current to 30mA PECL output enable Differential PECL inputs
More information5V/3.3V 155Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE
5V/3.3V 155Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE FEATURES DESCRIPTION Single 3.3V or 5V power supply Up to 155Mbps operation Modulation current to 30mA PECL output enable Differential PECL inputs
More information2.5Gbps HIGH-SPEED LIMITING POST AMPLIFIER Not recommended for new designs
2.5Gbps HIGH-SPEED LIMITING POST AMPLIFIER Not recommended for new designs FEATURES DESCRIPTION Up to 2.5Gbps operation Low noise Chatter-Free generation Open Collector TTL output TTL /EN Input Differential
More information5V 155Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE
V 1Mbps LASER DIODE DRIVER WITH OUTPUT ENABLE FEATURES DESCRIPTION Up to 1Mbps operation Modulation current to 2mA PECL output enable Differential PECL inputs Single V power supply Available in a tiny
More information3.3V DIFFERENTIAL LVPECL/CML/LVDS-to-LVTTL TRANSLATOR
3.3V DIFFERENTIAL LVPECL/CML/LVDS-to-LVTTL TRANSLATOR FEATURES 3.3V power supply 1.9ns typical propagation delay 275MHz f MAX Differential LVPECL/CML/LVDS inputs 24mA LVTTL outputs Flow-through pinouts
More information3.3V, 1.5GHz 1/ 2 DIFFERENTIAL LVECL/LVPECL PROGRAMMABLE CLOCK GENERATOR AND 1:15 FANOUT BUFFER
3.3V, 1.5GHz 1/ 2 DIFFERENTIAL LVECL/LVPECL PROGRAMMABLE CLOCK GENERATOR AND 1:15 FANOUT BUFFER FEATURES Four programmable output banks and 15 total LVPECL-compatible differential outputs Pin-compatible,
More informationNOT RECOMMENDED FOR NEW DESIGNS. 3.3V/5V 3GHz PECL/ECL 2:1 MULTIPLEXER
NOT RECOMMENDED FOR NEW DESIGNS Micrel, Inc. 3.3V/5V 3GHz PECL/ECL 2:1 MULTIPLEXER FEATURES 2:1 PECL/ECL multiplexer Guaranteed AC-performance over temperature/ voltage >3GHz f MAX (toggle)
More information5V/3.3V 3.2Gbps HIGH-SPEED LIMITING POST AMPLIFIER
5V/3.3V 3.2Gbps HIGH-SPEED LIMITING POST AMPLIFIER FEATURES DESCRIPTION > 3.2Gbps operation 3.3V or 5V power supply option Low noise CML data outputs Chatter-Free LOS generation Open Collector TTL LOS
More informationFeatures. Micrel Inc Fortune Drive San Jose, CA USA tel +1 (408) fax + 1 (408)
2.5V Low Jitter, Low Skew 1:12 LVDS Fanout Buffer with 2:1 Input MUX and Internal Termination General Description The is a 2.5V low jitter, low skew, 1:12 LVDS fanout buffer optimized for precision telecom
More informationSY10EP33V/SY100EP33V. General Description. Features. Pin Configuration. Pin Description. 5V/3.3V, 4GHz, 4 PECL/LVPECL Divider.
5V/3.3V, 4GHz, 4 PECL/LVPECL Divider Precision Edge General Description The SY10/100EP33V is an integrated 4 divider. The V BB pin, an internally-generated voltage supply, is available to this device only.
More informationSY10EL34/L SY100EL34/L
NOT RECOMMENDED FOR NEW DESIGNS 5/3.3 2, 4, 8 Clock Generation Chip Precision Edge General Description The SY10/100EL34/L are low-skew 2, 4, 8 clock generation chi designed explicitly for low-skew clock
More information1.25Gbps HIGH-SPEED LIMITING POST AMPLIFIER Not recommended for new designs
1.25Gbps HIGH-SPEED LIMITING POST AMPLIFIER Not recommended for new designs FEATURES DESCRIPTION Up to 1.25Gbps operation Low noise Chatter-Free Generation Open Collector TTL Output TTL /EN Input Differential
More informationFeatures. Applications. Markets
3.2Gbps Precision, LVDS 2:1 MUX with Internal Termination and Fail Safe Input General Description The is a 2.5V, high-speed, fully differential LVDS 2:1 MUX capable of processing clocks up to 2.5GHz and
More informationFeatures. Truth Table (1)
3.3V/5V, 4GHz PECL/ECL 2 Clock Generator Precision Edge General Description The is an integrated 2 divider with differential clock inputs. It is functionally equivalent to the SY100EP32V but in an ultra-small
More informationSY58608U. General Description. Features. Functional Block Diagram
3.2Gbps Precision, 1:2 LVDS Fanout Buffer with Internal Termination and Fail Safe Input General Description The is a 2.5V, high-speed, fully differential 1:2 LVDS fanout buffer optimized to provide two
More informationFeatures. Applications. Markets
Low Voltage 1.2V/1.8V/2.5V CML 1:4 Fanout Buffer with /EN 3.2Gbps, 3.2GHz General Description The is a fully differential, low voltage 1.2V/1.8V/2.5V CML 1:4 Fanout Buffer with active-low Enable (/EN).
More informationNOT RECOMMENDED FOR NEW DESIGNS. Features. Applications. Markets
NOT RECOMMENDED FOR NEW DESIGNS Low Voltage 1.2V/1.8V/2.5V CML 2x2 Crosspoint Switch 6.4Gbps with Equalization General Description The is a fully-differential, low-voltage 1.2V/1.8V/2.5V CML 2x2 crosspoint
More information3.3V/5V DUAL LVTTL/LVCMOS-to-DIFFERENTIAL LVPECL TRANSLATOR
3.3V/5V DUAL LVTTL/LVCMOS-to-DIFFERENTIAL LVPECL TRANSLATOR Precision Edge FEATURES 3.3V and 5V power supply option 300ps typical propagation delay Differential LVPECL outputs PNP LVTTL inputs for minimal
More informationSY88993AL. Features. General Description. Applications. Markets. 3.3V 3.2Gbps High-Speed Limiting Post Amplifier with High Input Sensitivity
3.3V 3.2Gbps High-Speed Limiting Post Amplifier with High Input Sensitivity General Description The limiting post amplifier, with its wide bandwidth, is ideal for use as a post amplifier in fiber-optic
More informationFeatures. Applications. Markets
3.2Gbps Precision, 1:2 LVPECL Fanout Buffer with Internal Termination and Fail Safe Input General Description The is a 2.5/3.3V, high-speed, fully differential 1:2 LVPECL fanout buffer optimized to provide
More informationSY89847U. General Description. Functional Block Diagram. Applications. Markets
1.5GHz Precision, LVDS 1:5 Fanout with 2:1 MUX and Fail Safe Input with Internal Termination General Description The is a 2.5V, 1:5 LVDS fanout buffer with a 2:1 differential input multiplexer (MUX). A
More informationPRECISION 1:8 LVPECL FANOUT BUFFER WITH 2:1 RUNT PULSE ELIMINATOR INPUT MUX
PRECISION 1:8 LVPECL FANOUT BUFFER WITH 2:1 RUNT PULSE ELIMINATOR INPUT MUX FEATURES Selects between two clocks, and provides 8 precision, low skew LVPECL output copies Guaranteed AC performance over temperature
More informationFeatures. Applications. Markets
Precision LVPECL Runt Pulse Eliminator 2:1 MUX with 1:2 Fanout and Internal Termination General Description The is a low jitter PECL, 2:1 differential input multiplexer (MUX) optimized for redundant source
More informationFeatures. Applications. Markets
1GHz Precision, LVDS 3, 5 Clock Divider with Fail Safe Input and Internal Termination General Description The is a precision, low jitter 1GHz 3, 5 clock divider with an LVDS output. A unique Fail- Safe
More informationFeatures. Applications. Markets
2GHz, Low-Power, 1:6 LVPECL Fanout Buffer with 2:1 Input MUX and Internal Termination General Description The is a 2.5V/3.3V precision, high-speed, 1:6 fanout capable of handling clocks up to 2.0GHz. A
More informationSY89854U. General Description. Features. Typical Applications. Applications
Precision Low Power 1:4 LVPECL Fanout Buffer/Translator with Internal Termination General Description The is a 2.5V/3.3V precision, highspeed, fully differential 1:4 LVPECL fanout buffer. Optimized to
More informationFeatures. Applications. Markets
1.5GHz Precision, LVPECL 1:5 Fanout with 2:1 MUX and Fail Safe Input with Internal Termination Precision Edge General Description The is a 2.5/3.3V, 1:5 LVPECL fanout buffer with a 2:1 differential input
More information5.5GHz 1:4 FANOUT BUFFER/ TRANSLATOR w/400mv LVPECL OUTPUTS AND INTERNAL INPUT TERMINATION. Precision Edge SY58022U FEATURES DESCRIPTION APPLICATIONS
5.5GHz 1:4 FANOUT BUFFER/ TRANSLATOR w/400mv LVPECL OUTPUTS AND TERNAL PUT TERMATION FEATURES Precision 1:4, 400mV LVPECL fanout buffer Guaranteed AC performance over temperature and voltage: > 5.5GHz
More informationFeatures. Applications. Markets
Precision LVPECL Runt Pulse Eliminator 2:1 Multiplexer General Description The is a low jitter PECL, 2:1 differential input multiplexer (MUX) optimized for redundant source switchover applications. Unlike
More informationPrecision Edge SY89876L DESCRIPTION FEATURES TYPICAL PERFORMANCE APPLICATIONS FUNCTIONAL BLOCK DIAGRAM
3.3V, 2.0GHz ANY DIFFERENTIAL -TO-LVDS PROGRAMMABLE CLOCK DIVIDER AND 1:2 FANOUT BUFFER W/ TERNAL TERMATION FEATURES DESCRIPTION Integrated programmable clock divider and 1:2 fanout buffer Guaranteed AC
More informationFeatures. Applications. Markets
4.25Gbps Precision, 1:2 CML Fanout Buffer with Internal Termination and Fail Safe Input General Description The is a 2.5/3.3V, high-speed, fully differential 1:2 CML fanout buffer optimized to provide
More informationULTRA-PRECISION DIFFERENTIAL CML 2:1 MUX with INTERNAL I/O TERMINATION
ULTRA-PRECISION DIFFERENTIAL CML 2:1 MUX with TERNAL I/O TERMATION FEATURES Guaranteed AC performance over temperature and voltage: DC to > 10.7Gbps data throughput DC to > 7GHz f MAX (clock) < 240ps propagation
More information5GHz, 1:2 LVPECL FANOUT BUFFER/TRANSLATOR WITH INTERNAL INPUT TERMINATION
5GHz, 1:2 LVPECL FANOUT BUFFER/TRANSLATOR WITH TERNAL PUT TERMATION FEATURES Precision 1:2, 800mV LVPECL fanout buffer Guaranteed AC performance over temperature/ voltage: > 5GHz f MAX (clock) < 110ps
More information6GHz, 1:6 CML FANOUT BUFFER WITH 2:1 MUX INPUT AND INTERNAL I/O TERMINATION
6GHz, 1:6 CML FANOUT BUFFER WITH 2:1 MUX PUT AND TERNAL I/O TERMATION Precision Edge FEATURES Provides six ultra-low skew copies of the selected input 2:1 MUX input included for clock switchover applications
More informationULTRA PRECISION 8:1 MUX WITH INTERNAL TERMINATION AND 1:2 CML FANOUT BUFFER
, IIIIInc. ULTRA PRECISION 8:1 MUX WITH TERNAL TERMATION AND 1:2 CML FANOUT BUFFER Precision Edge Precision Edge FEATURES Selects between 1 of 8 inputs, and provides two precision, low skew CML output
More informationFeatures. Applications
2.5GHz, Any Differential, In-to-LVPECL, Programmable Clock Divider/Fanout Buffer with Internal Termination General Description This low-skew, low-jitter device is capable of accepting a high-speed (e.g.,
More informationFeatures. Applications. Markets
Low oltage 1.2/1.8 CML 2:1 MUX 3.2Gbps, 2.5GHz General Description The is a fully differential, low voltage 1.2/1.8 CML 2:1 MUX. The can process clock signals as fast as 3.2GHz or data patterns up to 3.2Gbps.
More information2.5/3.3V 1:22 HIGH-PERFORMANCE, LOW-VOLTAGE PECL BUS CLOCK DRIVER & TRANSLATOR w/ INTERNAL TERMINATION
2.5/3.3V 1:22 HIGH-PERFORMANCE, LOW-VOLTAGE PECL BUS CLOCK DRIVER & TRANSLATOR w/ INTERNAL TERMINATION FEATURES LVPECL or LVDS input to 22 LVPECL outputs 100K ECL compatible outputs LVDS input includes
More informationULTRA PRECISION DIFFERENTIAL CML 4:1 MUX WITH 1:2 FANOUT AND INTERNAL I/O TERMINATION
ULTRA PRECISION DIFFERENTIAL CML 4:1 MUX WITH 1:2 FANOUT AND TERNAL I/O TERMATION FEATURES Selects 1 of 4 differential inputs Provides two copies of the selected input Guaranteed AC performance over temperature
More informationSY88903AL. General Description. Features. Applications. Markets
3.3V, Burst Mode 1.25Gbps PECL High- Sensitivity Limiting Post Amplifier with TTL Loss-of-Signal General Description The, burst mode, high-sensitivity limiting post amplifier is designed for use in fiber-optic
More informationSY89871U. General Description. Features. Typical Performance. Applications
2.5GHz Any Diff. In-To-LVPECL Programmable Clock Divider/Fanout Buffer w/ Internal Termination General Description The is a 2.5V/3.3V LVPECL output precision clock divider capable of accepting a high-speed
More information4GHz, 1:4 LVPECL FANOUT BUFFER/ TRANSLATOR WITH INTERNAL TERMINATION
4GHz, 1:4 LVPECL FANOUT BUFFER/ TRANSLATOR WITH TERNAL TERMATION FEATURES Precision 1:4, LVPECL fanout buffer Guaranteed AC performance over temperature/ voltage: >4GHz f MAX (clock)
More informationSY89838U. General Description. Features. Applications. Markets. Precision 1:8 LVDS Clock Fanout Buffer with 2:1 Runt Pulse Eliminator Input MUX
Precision 1:8 LVDS Clock Fanout Buffer with 2:1 Runt Pulse Eliminator Input MUX General Description The is a low jitter, low skew, high-speed 1:8 fanout buffer with a unique, 2:1 differential input multiplexer
More information5V/3.3V PROGRAMMABLE FREQUENCY SYNTHESIZER (25MHz to 400MHz)
5V/3.3V PROGRAMMABLE FREQUENCY SYNTHESIZER (25MHz to 400MHz) FEATURES 3.3V and 5V power supply options 25MHz to 400MHz differential PECL outputs 50ps peak-to-peak output jitter Minimal frequency over-shoot
More informationULTRA PRECISION 4 4 CML SWITCH WITH INTERNAL I/O TERMINATION
ULTRA PRECISION 4 4 CML SWITCH WITH INTERNAL I/O TERMINATION Precision Edge FEATURES Provides crosspoint switching between any input pair to any output pair Guaranteed AC performance over temperature and
More informationFeatures. Applications. Markets
Low Voltage 1.2V/1.8V CML Differential Line Driver/Receiver 3.2Gbps, 3.2GHz General Description The is a fully-differential, low-voltage 1.2V/1.8V CML Line Driver/Receiver. The can process clock signals
More information3.3V/5V 800MHz LVTTL/LVCMOS-to-DIFFERENTIAL LVPECL TRANSLATOR
3.3V/5V 800MHz LVTTL/LVCMOS-to-DIFFERENTIAL LVPECL TRANSLATOR FEATURES Guaranteed AC performance over temp and voltage: DC-to-800MHz f MAX
More informationSY56216R. General Description. Features. Applications. Functional Block Diagram. Markets
Low Voltage 1.2V/1.8V/2.5V CML Dual Channel Buffer 4.5GHz/6.4Gbps with Equalization General Description The is a fully-differential, low-voltage 1.2V/1.8V/2.5V CML Dual Channel Buffer with input equalization.
More informationULTRA PRECISION 8:1 MUX WITH INTERNAL TERMINATION AND 1:2 400mV LVPECL FANOUT BUFFER
ULTRA PRECISION 8:1 MUX WITH INTERNAL TERMINATION AND 1:2 400mV LVPECL FANOUT BUFFER FEATURES Selects between 1 of 8 inputs, and provides 2 precision, low skew LVPECL output copies Guaranteed AC performance
More informationSY88992L. Features. General Description. Applications. Markets. Typical Application. 3.3V, 4.25Gbps VCSEL Driver
3.3V, 4.25Gbps VCSEL Driver General Description The is a single supply 3.3V, low power consumption, small-form factor VCSEL driver ideal for use in datacom applications; Ethernet, GbE (Gigabit Ethernet),
More informationSY88422L. General Description. Features. Applications. Typical Application. 4.25Gbps Laser Driver with Integrated Bias
4.25Gbps Laser Driver with Integrated Bias General Description The is a single 3.3V supply, small form factor laser driver for telecom/datacom applications up to 4.25Gbps. The driver can deliver modulation
More informationFeatures. Applications. Markets
3.2Gbps Precision, LVPECL Buffer with Internal Termination and Fail Safe Input General Description The is a 2.5/3.3V, high-speed, fully differential LVPECL buffer optimized to provide only 108fs RMS phase
More informationSY89850U. General Description. Features. Typical Application. Applications. Markets
Precision Low-Power LVPECL Line Driver/Receiver with Internal Termination General Description The is a 2.5V/3.3V precision, high-speed, differential receiver capable of handling clocks up to 4GHz and data
More informationULTRA PRECISION 4 4 CML SWITCH WITH INTERNAL I/O TERMINATION
ULTRA PRECISION 4 4 CML SWITCH WITH INTERNAL I/O TERMINATION Precision Edge FEATURES Provides crosspoint switching between any input pair to any output pair Ultra-low jitter design: 67fs RMS phase jitter
More informationSY58626L. General Description. Features. Applications
DC-to-6.4Gbps Backplane Transmit Buffer with Selectable Output Pre-emphasis, I/O DC-Offset Control, and 200mV-3.0V PP Output Swing General Description The high-speed, low jitter transmit buffer is optimized
More informationNOT RECOMMENDED FOR NEW DESIGNS
NOT RECOMMENDED FOR NEW DESIGNS 2.5V/3.3V 2.5GHz DIFFERENTIAL 2-CHANNEL PRECISION CML DELAY LINE FEATURES Guaranteed AC parameters over temp and voltage > 2.5GHz f MAX < 384ps prop delay < 120ps t r /t
More informationSY58016L. Features. General Description. Applications. Package/Ordering Information. Pin Description
3.3V, 10Gbps Differential CML Line Driver/Receiver with Internal Termination General Description The is a high-speed, current mode logic (CML) differential receiver. It is ideal for interfacing with high
More informationFeatures. Applications
Ultra-Precision, 8:1 MUX with Internal Termination and 1:2 LVPECL Fanout Buffer Precision Edge General Description The is a low-jitter, low-skew, high-speed 8:1 multiplexer with a 1:2 differential fanout
More informationFeatures. Applications
Ultra-Precision 1:8 LVDS Fanout Buffer with Three 1/ 2/ 4 Clock Divider Output Banks Revision 6.0 General Description The is a 2.5V precision, high-speed, integrated clock divider and LVDS fanout buffer
More informationSY89540U. General Description. Features. Typical Performance. Applications. Precision Low Jitter 4x4 LVDS Crosspoint Switch with Internal Termination
Precision Low Jitter 4x4 LVDS Crosspoint Switch with Internal Termination General Description The is a low-jitter, low skew, high-speed 4x4 crosspoint switch optimized for precision telecom and enterprise
More informationAND INTERNAL TERMINATION
4.5GHz, 1:6 LVPECL Fanout Buffer WITH 2:1 MUX Input AND TERNAL TERMATION FEATURES Provides six ultra-low skew copies of the selected input 2:1 MUX input included for clock switchover applications Guaranteed
More informationFeatures. Applications
Ultra-Precision CML Data and Clock Synchronizer with Internal Input and Output Termination Precision Edge General Description The is an ultra-fast, precision, low jitter datato-clock resynchronizer with
More informationULTRA-PRECISION DIFFERENTIAL CML LINE DRIVER/RECEIVER WITH INTERNAL TERMINATION
ULTRA-PRECISION DIFFERENTIAL CML LE DRIVER/RECEIVER WITH TERNAL TERMATION FEATURES Guaranteed AC performance over temperature and voltage: DC-to >10.7Gbps data rate throughput DC-to >7GHz clock f MAX
More information3.3V/5V 2.5GHz PROGRAMMABLE DELAY
3.3V/5V 2.5GHz PROGRAMMABLE DELAY FEATURES Pin-for-pin, plug-in compatible to the ON Semiconductor MCEP95 Maximum frequency > 2.5GHz Programmable range: 2.2ns to 2.2ns ps increments PECL mode operating
More informationSY89540U. General Description. Features. Typical Performance. Applications. Precision Low Jitter 4x4 LVDS Crosspoint Switch with Internal Termination
Precision Low Jitter 4x4 LVDS Crosspoint Switch with Internal Termination General Description The is a low-jitter, low skew, high-speed 4x4 crosspoint switch optimized for precision telecom and enterprise
More informationULTRA-PRECISION DIFFERENTIAL LVPECL 2:1 MUX with INTERNAL TERMINATION
ULTRA-PRECISION DIFFERENTIAL LVPECL 2:1 MUX with TERNAL TERMATION FEATURES Guaranteed AC performance over temperature and voltage: DC to 5Gbps data throughput DC to > 4GHz f MAX (clock) < 260ps propagation
More informationSY89841U. General Description. Features. Applications. Markets. Precision LVDS Runt Pulse Eliminator 2:1 Multiplexer
SY89841U Precision LVDS Runt Pulse Eliminator 2:1 Multiplexer General Description The SY89841U is a low jitter LVDS, 2:1 input multiplexer (MUX) optimized for redundant source switchover applications.
More informationFeatures. Applications. Markets
Precision Low-Power Dual 2:1 LVPECL MUX with Internal Termination General Description The features two, low jitter 2:1 differential multiplexers with 100K LVPECL (800mV) compatible outputs, capable of
More informationULTRA-PRECISION DIFFERENTIAL 800mV LVPECL LINE DRIVER/RECEIVER WITH INTERNAL TERMINATION
ULTRA-PRECISION DIFFERENTIAL 800mV LVPECL LE DRIVER/RECEIVER WITH TERNAL TERMATION FEATURES Guaranteed AC performance over temperature and voltage: DC-to >5Gbps data rate throughput DC-to >5GHz clock f
More informationFeatures. Applications. Markets
3.3V, 3.2Gbps PECL Limiting Post Amplifier with Wide Signal-Detect Range General Description The low-power limiting post amplifiers are designed for use in fiber-optic receivers. These devices connect
More informationSY84403BL. General Description. Features. Applications. Typical Performance. Markets
Ultra Small 3.3V 4.25Gbps CML Low-Power Limiting Post Amplifier with TTL LOS General Description The is the industry s smallest limiting post amplifier ideal for compact copper and fiber optic module applications.
More information7GHz, 1:2 CML FANOUT BUFFER/TRANSLATOR WITH INTERNAL I/O TERMINATION
7GHz, 1:2 CML FANOUT BUFFER/TRANSLATOR WITH TERNAL I/O TERMATION Precision Edge FEATURES - Precision 1:2, 400mV CML fanout buffer - Low jitter performance: 49fs RMS phase jitter (typ) - Guaranteed AC performance
More informationULTRA PRECISION DIFFERENTIAL LVPECL 4:1 MUX with 1:2 FANOUT and INTERNAL TERMINATION
ULTRA PRECISION DIFFERENTIAL LVPECL 4:1 MUX with 1:2 FANOUT and TERNAL TERMATION FEATURES Selects 1 of 4 differential inputs Provides two copies of the selected input Guaranteed AC performance over temperature
More informationFeatures. Applications
PCIe Fanout Buffer 267MHz, 8 HCSL Outputs with 2 Input MUX PrecisionEdge General Description The is a high-speed, fully differential 1:8 clock fanout buffer optimized to provide eight identical output
More informationNOT RECOMMENDED FOR NEW DESIGNS
NOT RECOMMENDED FOR NEW DESIGNS ULTRA PRECISION 8:1 MUX WITH INTERNAL TERMINATION AND 1:2 400mV LVPECL FANOUT BUFFER FEATURES - Selects between 1 of 8 inputs, and provides 2 precision, low skew LVPECL
More informationFeatures. Applications
105MHz Low-Power SOT23-5 Op Amp General Description The is a high-speed operational amplifier which is unity gain stable regardless of resistive and capacitive load. It provides a gain-bandwidth product
More informationULTRA PRECISION DUAL 2:1 LVPECL MUX WITH INTERNAL TERMINATION
ULTRA PRECISION DUAL 2:1 LVPECL MUX WITH TERNAL TERMATION FEATURES Two independent differential 2:1 multiplexers Guaranteed AC performance over temperature and voltage: DC-to >5Gbps data rate throughput
More information