UIO Digital I/Os & DAQ Board User Manual
|
|
- Aleesha Wilkerson
- 5 years ago
- Views:
Transcription
1 UIO Digital I/Os & DAQ Board User Manual /3
2 UIO-369 Digital Inputs/Outputs & DAQ board with 5 channels and USB/RS3/Bluetooth/RF connectivity. Welcome to the world of Computer Automation. This Digital Input/Outputs (DIO) Board - UIO-369 is a perfect companion for all your computer automation projects where you require large number of I/Os as well as DAQ capability. UIO-369 can be connected with USB / RS3 serial COM port / Bluetooth / RF to PC, laptop or any Android device.( different models have different connectivity.) It has up to 5 digital & 40 analogue I/Os that will help you to monitor various real world scenarios using switches & different kind of sensors to monitor many parameters like Temperature, Pressure, Light, Touch, PH etc. This card is not only good for monitoring various parameters but a perfect candidate for Data Acquisition & control applications. It appears as a USB CDC ( Communications Device Class) device when connected to USB port of a computer ( for USB based cards). This creates a Virtual Serial (COM) Port, which allows easy communication with the card. Any programming language that supports serial communications ( C, C#, C++, VB, VB.NET, Perl, Java etc) can be used to communicate with UIO-369 very easily. Easy to use commands are available to communicate with UIO-369 which handle various tasks like Controlling Digital Inputs & Outputs and getting analog data etc. The controller provides up to 5 digital input & output pins. It has also got up to 40 analog input pins and up to 35 PWM output pins.all pins will be individually configured as Digital Input or Digital output or Analog input automatically as per input command on the fly. Each Digital pin can support a TTL or Schmitt Trigger Input or a 3.3V output. Each analog pin will convert analog voltage ( Between 0 to 3V) or Higher ( through voltage divider) into 0 bit resolution value. The output can be raw data or converted into voltage. The raw data be converted into required form using conversion formulas. Any kind of sensor wether it is providing digital output or analogue output can be interfaced with UIO-369 and monitored with the help of computer. Get windows drivers, test applications and sample codes at - Manufactured by - Iknowvations Akshay Colony,Gokul Road Hubli India. /3
3 3 Connector Ch-0 to 5 Connector Ch-5 to 0 Connector 3 Ch-00 to 50 Connector 4 Ch-49to 99 Connector 5 Ch- to 48 Power LED 5 V regulator DC power jack 7- V DC center +ve LED output USB connector Serial port connector ( for RS3 based cards only) Technical Specifications - Digital Inputs/outputs - Up to 5 ( 3.3 V DC max) + one LED output. Max Current - 5 ma per pin sink or source from any channel pin. Analog Inputs - Up to 40 ( 3.3 V DC max). PWM outputs - Up to 35 ( 3.3 V DC max). Supply voltage V DC. ADC Resolution - 0 bits Please Read Carefully This device UIO-369 connects to your computer and can be used to control external devices through its pins. Incorrect use or faulty board can cause damage to controller itself or USB controller of your computer or Motherboard of your computer. Extreme care should be taken while using this board. It will be totally user s responsibility for the use of this card. Iknowvations, it s employees, suppliers, distributors, dealers and/or resellers are not liable to any kind of damage or loss of data as a result of use of this device, including special, incidental, or consequential damages resulting from the use of this device or under any legal theory, including loss of profits, downtime, goodwill damage to, or replacement of equipment or property and any cost for recovering or reproducing any data stored in computers connected with this device. Your purchase and/or use of this board indicates your acceptance of these terms. 3/3
4 4 Connector details - CN-5 CN-4 CN-3 CN- CN- Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch-3 Ch-33 Ch-35 Ch-37 Ch-39 Ch-4 Ch-43 Ch-45 Ch-47 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-30 Ch-3 Ch-34 Ch-36 Ch-38 Ch-40 Ch-4 Ch-44 Ch-46 Ch-48 Ch-50 Ch-5 Ch-54 Ch-56 Ch-58 Ch-60 Ch-6 Ch-64 Ch-66 Ch-68 Ch-70 Ch-7 Ch-74 Ch-76 Ch-78 Ch-80 Ch-8 Ch-84 Ch-86 Ch-88 Ch-90 Ch-9 Ch-94 Ch-96 Ch-98 Ch-49 Ch-5 Ch-53 Ch-55 Ch-57 Ch-59 Ch-6 Ch-63 Ch-65 Ch-67 Ch-69 Ch-7 Ch-73 Ch-75 Ch-77 Ch-79 Ch-8 Ch-83 Ch-85 Ch-87 Ch-89 Ch-9 Ch-93 Ch-95 Ch-97 Ch-99 Ch-0 Ch-03 Ch-05 Ch-07 Ch-09 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch-3 Ch-33 Ch-35 Ch-37 Ch-39 Ch-4 Ch-43 Ch-45 Ch-47 Ch-49 Ch-00 Ch-0 Ch-04 Ch-06 Ch-08 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-30 Ch-3 Ch-34 Ch-36 Ch-38 Ch-40 Ch-4 Ch-44 Ch-46 Ch-48 Ch-50 Ch-5 Ch-54 Ch-56 Ch-58 Ch-60 Ch-6 Ch-64 Ch-66 Ch-68 Ch-70 Ch-7 Ch-74 Ch-76 Ch-78 Ch-80 Ch-8 Ch-84 Ch-86 Ch-88 Ch-90 Ch-9 Ch-94 Ch-96 Ch-98 Ch-00 Ch-5 Ch-53 Ch-55 Ch-57 Ch-59 Ch-6 Ch-63 Ch-65 Ch-67 Ch-69 Ch-7 Ch-73 Ch-75 Ch-77 Ch-79 Ch-8 Ch-83 Ch-85 Ch-87 Ch-89 Ch-9 Ch-93 Ch-95 Ch-97 Ch-99 Ch-0 Ch-03 Ch-05 Ch-07 Ch-09 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch-3 Ch-33 Ch-35 Ch-37 Ch-39 Ch-4 Ch-43 Ch-45 Ch-47 Ch-49 Ch-5 Ch-0 Ch-04 Ch-06 Ch-08 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-30 Ch-3 Ch-34 Ch-36 Ch-38 Ch-40 Ch-4 Ch-44 Ch-46 Ch-48 Ch-50 Ch All channels are unbuffered so excessive current from any channel may damage the card. All the channels will be in Output mode with 0 or Low outputs when power is first applied or connected to PC. 4/3
5 5 ADC & PWM channel details - CN-5 CN-4 CN-3 CN- CN- Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 A00 A004 A006 A008 P3 R3 Ch-39 Ch-4 Ch-43 T3 V3 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 A00 A003 A005 A007 Ch-34 Q3 Ch-38 Ch-40 Ch-4 S3 U3 Ch-48 Ch-50 Ch-5 Ch-54 Ch-56 Ch-58 Ch-60 Ch-6 Ch-64 Ch-66 Ch-68 Ch-70 Ch-7 Ch-74 Ch-76 A050 A05 A054 A056 Ch-86 P4 R4 Ch-9 Ch-94 Ch-96 T4 V4 Ch-5 Ch-53 Ch-55 Ch-57 Ch-59 Ch-6 Ch-63 Ch-65 Ch-67 Ch-69 Ch-7 Ch-73 Ch-75 A049 A05 A053 A055 Ch-85 Ch-87 Q4 Ch-9 Ch-93 Ch-95 S4 U4 Ch-0 Ch-03 Ch-05 Ch-07 Ch-09 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 A0 A03 A05 A07 Ch-37 P5 R5 Ch-43 Ch-45 Ch-47 T5 V5 Ch-0 Ch-04 Ch-06 Ch-08 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 A00 A0 A04 A06 Ch-36 Ch-38 Q5 Ch-4 Ch-44 Ch-46 S5 U5 Ch-5 Ch-54 Ch-56 Ch-58 Ch-60 Ch-6 Ch-64 Ch-66 Ch-68 Ch-70 Ch-7 Ch-74 Ch-76 Ch-78 A5 A54 A56 A58 Ch-88 P6 R6 Ch-94 Ch-96 Ch-98 T6 V6 Ch-53 Ch-55 Ch-57 Ch-59 Ch-6 Ch-63 Ch-65 Ch-67 Ch-69 Ch-7 Ch-73 Ch-75 Ch-77 A5 A53 A55 A57 Ch-87 Ch-89 Q6 Ch-93 Ch-95 Ch-97 S6 U6 Ch-03 Ch-05 Ch-07 Ch-09 Ch- Ch-3 Ch-5 Ch-7 Ch-9 Ch- Ch-3 Ch-5 Ch-7 Ch-9 A03 A05 A07 A09 Ch-39 P7 R7 Ch-45 Ch-47 Ch-49 T7 V7 Ch-04 Ch-06 Ch-08 Ch-0 Ch- Ch-4 Ch-6 Ch-8 Ch-0 Ch- Ch-4 Ch-6 Ch-8 A0 A04 A06 A08 Ch-38 Ch-40 Q7 Ch-44 Ch-46 Ch-48 S7 U Please note that the number of ADC channels available will depend upon the model of UIO-369 you are using. The ADC channels may or may not be available based on UIO-369 variant. The pin will be Analog input or Digital input/output automatically as per given command. 5/3
6 6 Command Reference -. For Digital Outputs - H00 - Set output of Channel 00 to or H igh. L00 - Set output of Channel 00 to 0 or Low. There are up to 5 digital Output channels on this card so it will be up to H5 or L5.. For Digital Inputs - I00 - Get Input value of Channel 00. I00 - Get Input value of Channel 00. There are up to 5 digital Inputs channels on this card so it will be up to I5. The value of input pins will be ( if it is High - 3 VDC) or 0 ( if it is Low - 0 V DC). The board will respond with 0 or depending upon the value at Pin. 3. For Analog Inputs - A00 - Get ADC value of Analog Channel 00. There 5 groups- A00 to A008, A049 to A056, A00 to A07, A5 to A58, A0 to A09. There are up to 40 Analog channels on this card so it will be up to A09. The resolution is of 0 bits so the input voltage ( 0-3V Dc) will be converted to 0 to 03 Decimal value or direct voltage value. 4. For PWM outputs - XY0 to XY99 - PWM output of channel XY - from 0 to 99 % X can be one of P,Q,R,S,T,U & V while Y can be one of 3,4,5,6,7 So P350 command will provide pwm output of 50% on P3 channel. Likewise T799 will output pwm signal of 99% on T7 channel pin. 4. Miscellaneous Commands - LED - Make on board LED ON. LED0 - Make on board LED OFF. BORD - Information about the board. VERS - Firmware Version Number. HELP - Provides list of commands Please note that all commands are sent in CAPITAL letters only. Model number reference - Model number - UIO R A R - RS3 based U - USB based B - Bluetooth based F - RF based - 50 channels - 0 channels 3-5 channels A - No ADC channels B - 8 ADC channels + 7 PWM channels C - 6 ADC channels + 4 PWM channels D - 4 ADC channels + PWM channels E - 3 ADC channels + 8 PWM channels F - 40 ADC channels + 35 PWM channels For example the board having model number UIO-369-U3B will be USB based board with 5 digital input/output channels & 8 ADC channels + 7 PWM channels. 6/3
7 7 Windows Driver Installations - Download Pl303 Prolific Driver Installer from our download section at http///downloads/. Run it to install the drivers. Now connect UIO-369 card to PC or Laptop and it will be automatically recognized and will be assigned a COM port which can be checked from Device Manager. Once the PC detects the card and assigns the COM port number, you can check it in Device Manager Tab. Note it down. Now you can communicate with the card through assigned COM port. You can use any Serial Communication software like HyperTerminal, PuTTy etc to send commands. For Hyper Terminal, settings are 500, 8, N, as shown below. 7/3
8 8 If you want to see the commands in HyperTerminal window, go to Properties Tab > ASCII Setup and check the Echo box as shown below. By sending HELP command, you get the welcoming message and the commands detail. 8/3
9 9 Dimensions of the board 9/3
10 0 Using Input channels - Input channels can be used to monitor input conditions of any signal that toggles between 0 and, that is between High & Low. Following is one of the ways to monitor input value - Key inputs. + 3 V DC Resistor Press to on key To Input channel GND Using ADC channels - ADC channels can be used to monitor input voltages of any signal that varies between 0 and 3 V Dc. Following is one of the ways to monitor ADC input value. + 3 V DC + 3 V DC Variable Resistor To Input channel GND Any sensor providing analog output 0-3 V Dc. GND Using Output channels - Output channels can be toggled between & 0, that is bet High & Low. This signal can be used to switch on & off higher voltage loads through use of transistor shown as under - Resistor Led + 5 V + 5/9/ V Dc Relay Diode NPN Transistor Resistor NPN Transistor Resistor 0/3
11 You may also be interested in... U96 with LCD Low cost TFT LCD based HMI solutions /3
12 Revision history Document revision history Date Revision Changes -Feb-07 Initial release. For more information visit - www. /3
13 3 Please Read Carefully Information in this document is provided solely in connection with Iknowvations products. Iknowvations reserrve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at anytime, without notice. All Iknowvations products are sold pursuant to Iknowvations terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the Iknowvations products and services described herein, and Iknowvations assumes no liability whatsoever relating to the choice, selection or use of the Iknowvations products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by Iknowvations for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN IKNOWVATIONS S TERMS AND CONDITIONS OF SALE IKNOWVATIONS DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF IKNOWVATIONS PRODUCTS ILUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING IKNOWVATIONS PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of IKNOWVATIONS products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by Iknowvations for the Iknowvations product or service described herein and shall not create or extend in any manner whatsoever, any liability of Iknowvations. www. Manufactured by - Iknowvations Akshay Colony, Gokul Road, Hubli India. Contacts - Web - Sales - sales@ Support - support@ Information - info@ Buy online at our Shoppee - 3/3
AN4014 Application Note Adjustable LED blinking frequency using a potentiometer and STM8SVLDISCOVERY Application overview
Application Note Adjustable LED blinking frequency using a potentiometer and STM8SVLDISCOVERY Application overview Note: This document introduces a very simple application example which is ideal for beginners
More informationSTEVAL-ISQ010V1. High-side current-sense amplifier demonstration board based on the TSC102. Features. Description
High-side current-sense amplifier demonstration board based on the TSC102 Data brief Features Independent supply and input common-mode voltages Wide common-mode operating range: 2.8 V to 30 V Wide common-mode
More informationAN279 Application note
Application note Short-circuit protection on the L6201, L6202 and the L6203 By Giuseppe Scrocchi and Thomas Hopkins With devices like the L6201, L6202 or L6203 driving external loads you can often have
More informationAN3332 Application note
Application note Generating PWM signals using STM8S-DISCOVERY Application overview This application user manual provides a short description of how to use the Timer 2 peripheral (TIM2) to generate three
More informationAN3134 Application note
Application note EVAL6229QR demonstration board using the L6229Q DMOS driver for a three-phase BLDC motor control application Introduction This application note describes the EVAL6229QR demonstration board
More informationBD235 BD237. Low voltage NPN power transistors. Features. Applications. Description. Low saturation voltage NPN transistors
BD235 BD237 Low voltage NPN power transistors Features Low saturation voltage NPN transistors Applications Audio, power linear and switching applications Description The devices are manufactured in Planar
More informationAN2837 Application note
Application note Positive to negative buck-boost converter using ST1S03 asynchronous switching regulator Abstract The ST1S03 is a 1.5 A, 1.5 MHz adjustable step-down switching regulator housed in a DFN6
More informationSTEVAL-ISA005V1. 1.8W buck topology power supply evaluation board with VIPer12AS. Features. Description. ST Components
Features Switch mode general purpose power supply Input: 85 to 264Vac @ 50/60Hz Output: 15V, 100mA @ 50/60Hz Output power (pick): 1.6W Second output through linear regulator: 5V / 60 or 20mA Description
More informationEVAL-RHF310V1. EVAL-RHF310V1 evaluation board. Features. Description
evaluation board Data brief Features Mounted Engineering Model RHF310K1: Rad-hard, 120 MHz, operational amplifier (see RHF310 datasheet for further information) Mounted components (ready-to-use) Material:
More informationBD533 BD535 BD537 BD534 BD536
BD533 BD535 BD537 BD534 BD536 Complementary power transistors Features. BD533, BD535, and BD537 are NPN transistors Description The devices are manufactured in Planar technology with Base Island layout.
More informationAN1441 Application note
Application note ST890: a high side switch for PCMCIA and USB applications Introduction The ST890 is a low voltage, P-channel MOSFET power switch, intended for high side load switching applications. Its
More informationUM0890 User manual. 2-stage RF power amplifier with LPF based on the PD85006L-E and STAP85050 RF power transistors. Introduction
User manual 2-stage RF power amplifier with LPF based on the PD85006L-E and STAP85050 RF power transistors Introduction This user manual briefly describes the fution and use of the STEVAL-TDR0V demonstration
More informationAN2581 Application note
AN2581 Application note STM32F10xxx TIM application examples Introduction This application note is intended to provide practical application examples of the STM32F10xxx TIMx peripheral use. This document,
More informationBD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
More informationD44H8 - D44H11 D45H8 - D45H11
D44H8 - D44H11 D45H8 - D45H11 Complementary power transistors Features. Low collector-emitter saturation voltage Fast switching speed TAB Applications Power amplifier Switching circuits 1 2 3 Description
More informationObsolete Product(s) - Obsolete Product(s)
Low voltage fast-switching PNP power transistor Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed 3 Miniature SOT-23 plastic package for surface
More information2STR2215. Low voltage fast-switching PNP power transistor. Features. Applications. Description
Low voltage fast-switching PNP power transistor Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Miniature SOT-23 plastic package for surface
More informationGE-ABS302 and GE-ABS604
GE-ABS302 and GE-ABS604 LED voltage controller PRELIMINARY DATASHEET Features 32-bit Dual core ARM Cortex-M4/M0 microcontroller Low power consumption Up to 4 independent channels Four selectable drive
More informationAN2333 Application note
Application note White LED power supply for large display backlight Introduction This application note is dedicated to the STLD40D, it's a boost converter that operates from 3.0 V to 5.5 V dc and can provide
More informationObsolete Product(s) - Obsolete Product(s)
2N6284 2N6287 Complementary power Darlington transistors Features Complementary transistors in monolithic Darlington configuration Integrated collector-emitter antiparallel diode Applications Audio power
More informationOrder codes Marking Polarity Package Packaging. MJD44H11T4 MJD44H11 NPN DPAK Tape and reel MJD45H11T4 MJD45H11 PNP DPAK Tape and reel
MJD44H11 MJD45H11 Complementary power transistors Features. Low collector-emitter saturation voltage Fast switching speed Surface-mounting TO-252 (DPAK) power package in tape and reel (suffix "T4") Applications
More informationLM723CN. High precision voltage regulator. Features. Description
High precision voltage regulator Features Input voltage up to 40 V Output voltage adjustable from 2 to 37 V Positive or negative supply operation Series, shunt, switching or floating operation Output current
More informationTR136. High voltage fast-switching NPN power transistor. Features. Applications. Description
TR136 High voltage fast-switching NPN power transistor Features High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed Applications
More informationR 1 typ. = 15 kω. Order codes Marking Polarity Package Packaging. 2N6036 2N6036 NPN SOT-32 Tube 2N6039 2N6039 PNP SOT-32 Tube
2N6036 2N6039 Complementary power Darlington transistors Features. Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode Applications
More informationST26025A. PNP power Darlington transistor. Features. Applications. Description
ST26025A PNP power Darlington transistor Features High current monolithic Darlington configuration Integrated antiparallel collector-emitter diode Applications Automotive fan control Linear and switching
More informationAN440 Application note
Application note QII and QIII TRIAC triggering with positive power supply Introduction New TRIACs with high commutation and dv/dt performances are now available on the market. Generally these TRIACs can
More informationGE-ABS302 and GE-ABS604
GE-ABS302 and GE-ABS604 LED voltage controller DATASHEET Features 32-bit Dual core ARM Cortex-M4/M0 Low power consumption Up to 4 independent channels Four selectable drive functions Four low current 0/10V
More informationSTD1802T4-A. Low voltage fast-switching NPN power transistor. Features. Description. Applications
Low voltage fast-switching NPN power transistor Features This device is qualified for automotive application Very low collector to emitter saturation voltage High current gain characteristic Fast-switching
More informationSTEVAL-CCA040V1. 4X10 Watt dual/quad power amplifier demonstration board based on the STA540SAN. Features. Description
4X10 Watt dual/quad power amplifier demonstration board based on the STA540SAN Features High output-power capability: 4x10 W / 4 Ω at 17 V, 1 KHz, THD = 10% 2x26 W / 4 Ω at 14.4 V, 1 KHz, THD = 10% 2x15
More informationTIP2955 TIP3055. Complementary power transistors. Features. Applications. Description
TIP2955 TIP3055 Complementary power transistors Features Low collector-emitter saturation voltage Complementary NPN - PNP transistors Applications General purpose Audio Amplifier Description The devices
More informationBUL39D. High voltage fast-switching NPN power transistor. Features. Application. Description
High voltage fast-switching NPN power transistor Features Integrated antiparallel collector-emitter diode High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable
More informationOrder codes Temperature range Package Packaging
CMOS quad 3-state differential line driver Features TTL input compatible Typical propagation delay: 6 ns Typical output skew: 0.5 ns Output will not load line when V CC = 0 V Meets the requirements of
More informationBD243C BD244C. Complementary power transistors. Features. Applications. Description. Complementary NPN-PNP devices. Power linear and switching TO-220
BD243C BD244C Complementary power transistors Features. Complementary NPN-PNP devices Applications Power linear and switching Description The device is manufactured in Planar technology with Base Island
More informationAN2167 Application note
Application note Using the STPM01 with a shunt current sensor Introduction Note: This document describes how a shunt current sensor can be used with the STPM01 metering device in single-phase metering
More informationAN1756 Application note
Application note Choosing a DALI implementation strategy with ST7DALIF2 Introduction This application note describes how to choose a DALI (Digital Addressable Lighting Interface) implementation strategy
More informationSTB High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Features Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed Through hole TO-262 (I 2 PAK) power
More informationST13003D-K High voltage fast-switching NPN power transistor Features Applications Description
High voltage fast-switching NPN power transistor Features High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation ery high switching speed Integrated antiparallel
More information2STC4468. High power NPN epitaxial planar bipolar transistor. Features. Application. Description
High power NPN epitaxial planar bipolar transistor Features High breakdown voltage V CEO = 140 V Complementary to 2STA1695 Typical f t = 20 MHz Fully characterized at 125 C Application 1 2 3 Audio power
More informationR 1 typ. = 15 kω. Order codes Marking Polarity Package Packaging. STX112-AP X112 NPN TO92-AP Ammopack STX117-AP X117 PNP TO92-AP Ammopack
STX112 STX117 Complementary power Darlington transistors Features. Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode Application
More informationSD1728 (TH430) RF & Microwave transistors HF SSB application. Features. Description. Pin connection
SD1728 (TH430) RF & Microwave transistors HF SSB application Features 13.56MHz 44V Gold metallization Common emitter P OUT = 200W with 15dB gain Description The SD1728 is a 50V epitaxial silicon NPN planar
More informationL6221. Quad Darlington switch. Features. Applications. Description
L6221 Quad Darlington switch Features Four non-inverting inputs with enable Output voltage up to 50 V Output current up to 1.8 A Very low saturation voltage TTL compatible inputs Integral fast recirculation
More informationObsolete Product(s) - Obsolete Product(s)
PNP power Darlington transistor Features Monolithic Darlington configuration Integrated antiparallel collector-emitter diode Application Linear and switching industrial equipment Description The TIP145
More information2STN2540. Low voltage fast-switching PNP power bipolar transistor. Features. Applications. Description
2STN2540 Low voltage fast-switching PNP power bipolar transistor Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Surface mounting device in
More informationBUX87. High voltage NPN power transistor. Features. Applications. Description
High voltage NPN power transistor Features High voltage capability (450 V V CEO ) Minimum lot-to-lot spread for reliable operation High DC current gain Applications Flyback and forward single transistor
More informationObsolete Product(s) - Obsolete Product(s)
High power PNP epitaxial planar bipolar transistor Features High breakdown voltage V CEO = -120 V Complementary to 2STC4467 Fast-switching speed Typical f t = 20 MHz Fully characterized at 125 o C Applications
More information2STD1360 2STF1360-2STN1360
2STD1360 2STF1360-2STN1360 Low voltage fast-switching NPN power transistors Features Very low collector-emitter saturation voltage High current gain characteristic Fast-switching speed 4 1 2 3 4 1 3 2
More informationBUL38D. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Features High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed High ruggedness
More informationMJE182 Low voltage high speed switching NPN transistor Features Applications Description High speed switching NPN device
Low voltage high speed switching NPN transistor Features High speed switching NPN device Applications Audio amplifier High speed switching applications Description This device is an NPN low voltage transistor
More information2STC4468. High power NPN epitaxial planar bipolar transistor. Features. Application. Description
High power NPN epitaxial planar bipolar transistor Features High breakdown voltage V CEO = 140 V Complementary to 2STA1695 Typical f t = 20 MHz Fully characterized at 125 o C Application Audio power amplifier
More information2STD1665. Low voltage fast-switching NPN power transistor. Features. Applications. Description
Low voltage fast-switching NPN power transistor Features Very low collector to emitter saturation voltage High current gain characteristic TAB Fast-switching speed Applications Voltage regulators High
More informationObsolete Product(s) - Obsolete Product(s)
RS-232 quad line driver General features Current limited output ±10mA typ. Power-off source impedance 300Ω min. Simple slew rate control with external capacitor Flexible operating supply range Inputs are
More informationOrder codes Marking Package Packaging. STX0560 X0560 TO-92 Bag STX0560-AP X0560 TO-92AP Ammopack. December 2010 Doc ID Rev 1 1/9
High voltage fast-switching NPN power transistor Preliminary data Features High voltage capability Very high switching speed Applications Compact fluorescent lamps (CFLs) SMPS for battery charger Description
More informationBDX53B - BDX53C BDX54B - BDX54C
BDX53B - BDX53C BDX54B - BDX54C Complementary power Darlington transistors Features Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter
More informationAN2243 Application note
Application note Step up converter for camera flash light Introduction STCF01 is a dedicated IC to drive up to four white LEDs with constant current in camera flash for cellular phones. It provides up
More information2STC5242. High power NPN epitaxial planar bipolar transistor. Features. Application. Description
2STC5242 High power NPN epitaxial planar bipolar transistor Features High breakdown voltage V CEO = 230 V Complementary to 2STA1962 Fast-switching speed Typical f T = 30 MHz Application Audio power amplifier
More information2STR SOT-23 Tape and reel 2STR1230G 130G SOT-23 Tape and reel
Low voltage fast-switching NPN power transistor Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Miniature SOT-23 plastic package for surface
More informationOrder codes Temperature range Package Packaging
CMOS quad 3-state differential line receiver Features CMOS design for low power ± 0.2 V sensitivity over input common mode voltage range Typical propagation delay: 19 ns Typical input hysteresis: 60 mv
More informationAN1229 Application note
Application note SD2932 RF MOSFET for 300 W FM amplifier Introduction This application note gives a description of a broadband power amplifier operating over the frequency range 88-108 MHz using the new
More informationSTD840DN40. Dual NPN high voltage transistors in a single package. Features. Applications. Description
Dual NPN high voltage transistors in a single package Datasheet production data Features Low V CE(sat) Simplified circuit design Reduced component count Fast switching speed Applications Compact fluorescent
More informationLM323. Three-terminal 3 A adjustable voltage regulators. Features. Description
Three-terminal 3 A adjustable voltage regulators Features Output current: 3 A Internal current and thermal limiting Typical output impedance: 0.01 W Minimum input voltage: 7.5 V Power dissipation: 30 W
More informationSPV1001T40. Cool bypass switch for photovoltaic application. Features. Application. Description TO-220
Cool bypass switch for photovoltaic application Features I F =16 A, V R = 40 V Very low forward voltage drop Very low reverse leakage current 150 C operating junction temperature +4 Application Photovoltaic
More informationPart numbers Order codes Packages Temperature range. LM137 LM137K TO-3-55 C to 150 C LM337 LM337K TO-3 0 C to 125 C LM337 LM337SP TO C to 125 C
LM137 LM337 Three-terminal adjustable negative voltage regulators Features Output voltage adjustable down to V REF 1.5 A guaranteed output current 0.3%/V typical load regulation 0.01%/V typical line regulation
More informationLET9060C. RF power transistor from the LdmoST family of n-channel enhancement-mode lateral MOSFETs. Features. Description
RF power transistor from the LdmoST family of n-channel enhancement-mode lateral MOSFETs Features Excellent thermal stability Common source configuration P OUT (@ 28 V)= 60 W with 18 db gain @ 945 MHz
More informationDescription. Part numbers Order codes Packages Output voltages
LDFM LDFM5 5 ma very low drop voltage regulator Datasheet production data Features Input voltage from 2.5 to 16 V Very low dropout voltage (3 mv max. at 5 ma load) Low quiescent current (2 µa typ. @ 5
More information2STA1943. High power PNP epitaxial planar bipolar transistor. Features. Application. Description
High power PNP epitaxial planar bipolar transistor Features High breakdown voltage V CEO > -230V Complementary to 2STC5200 Fast-switching speed Typical f T = 30 MHz Application Audio power amplifier Description
More informationESDALCL6-4P6A. Multi-line low capacitance and low leakage current ESD protection. Features. Applications. Description
Multi-line low capacitance and low leakage current ESD protection Features Datasheet production data Diode array topology: 4 lines protection Low leakage current: 10 na at 3 V 1 na at 1 V Very low diode
More informationAN4233 Application note
Application note Sound Terminal : a method for measuring the total thermal resistance (R th ) in the final application Introduction By Marco Brugora The purpose of this document is to provide a methodology
More informationCPL-WB-02D3. Wide-band, directional coupler with integrated 50 ohm loaded isolated port. Features. Applications. Description.
CPL-WB-02D3 Wide-band, directional coupler with integrated 50 ohm loaded isolated port Datasheet production data Features 50 Ω nominal input / output impedance Wide operating frequency range (2400 MHz
More informationLD1117Axx. Low drop fixed and adjustable positive voltage regulators. Features. Description
Low drop fixed and adjustable positive voltage regulators Features Low dropout voltage (1.15 V typ. @ I OUT = 1 A, 25 C) Very low quiescent current (5 ma typ. @ 25 C) Output current up to 1 A Fixed output
More informationL78S00 series. 2A Positive voltage regulators. Feature summary. Description. Schematic diagram
2A Positive voltage regulators Feature summary Output current to 2A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24V Thermal overload protection Short circuit protection Output transition SOA protection
More informationAN2679 Application note
Application note Smart inductive proximity switch Introduction The STEVAL-IFS006V inductive proximity switch demonstration board is designed based on the principle of metal body detection using the eddy
More informationPhlox Optical Waveguide for Augmented Reality Displays
Phlox Optical Waveguide for Augmented Reality Displays Phlox is a transparent optical waveguide for use in full colour, near-to-eye, augmented reality (AR) displays. FEATURES Made of glass with precision
More informationOrder codes Marking Package Packaging 2STF SOT-89 2STN2550 N2550 SOT-223. November 2008 Rev 1 1/8
2STF2550 2STN2550 Low voltage high performance PNP power transistors Preliminary Data Features Very low collector-emitter saturation voltage High current gain characteristic Fast switching speed Surface
More information2STD1665. Low voltage fast-switching NPN power transistor. Features. Applications. Description
Low voltage fast-switching NPN power transistor Features Very low collector to emitter saturation volatage High current gain characteristic Fast-switching speed Through-hole IPAK (TO-251) power package
More informationObsolete Product(s) - Obsolete Product(s)
TIP33C Complementary power transistors Features. Low collector-emitter saturation voltage Complementary NPN - PNP transistors Applications General purpose Description The devices are manufactured in epitaxial-base
More information1. Drain 2. Gate. Order code Marking Package Packaging. STAC4932F STAC4932F STAC244F Plastic tray. September 2010 Doc ID Rev 3 1/12
RF power transistors HF/VHF/UHF N-channel MOSFETs Preliminary data Features Excellent thermal stability Common source push-pull configuration P OUT = 1000 W min. (1200 W typ.) with 26 db gain @ 123 MHz
More information2STA1695. High power PNP epitaxial planar bipolar transistor. Features. Applications. Description
High power PNP epitaxial planar bipolar transistor Features High breakdown voltage V CEO = -140 V Complementary to 2STC4468 Typical f t = 20 MHz Fully characterized at 125 C Applications 1 2 3 Audio power
More informationOrder codes Marking Package Packaging. STD2805T4 D2805 DPAK Tape & reel STD D2805 IPAK Tube. June 2007 Rev 1 1/9
Low voltage fast-switching PNP power transistor Preliminary Data Features Very low collector to emitter saturation voltage High current gain characteristic Fast-switching speed Surface-mounting DPAK (TO-252)
More informationLow noise low drop voltage regulator with shutdown function. Part numbers
Low noise low drop voltage regulator with shutdown function Features Output current up to 150 ma Low dropout voltage (350 mv at I OUT = 50 ma) Very low quiescent current: 0.1 µa in OFF mode and max. 250
More informationSTL128D. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Features High voltage capability Low spread of dynamic parameters Very high switching speed Integrated antiparallel collector-emitter diode TAB Applications
More informationSTX13005G-AP. High voltage fast-switching NPN power transistor. Features. Applications. Description
STX13005 High voltage fast-switching NPN power transistor Features High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed Applications
More informationObsolete Product(s) - Obsolete Product(s)
Single bilateral switch Features High speed: t PD = 0.3 ns (typ.) at V CC = 5 V t PD = 0.4 ns (typ.) at V CC = 3.3 V Low power dissipation: I CC = 1 μa (max.) at T A =25 C Low "ON" resistance: R ON =6.5Ω
More informationSTN High voltage fast-switching PNP power transistor. Features. Application. Description. High voltage capability Very high switching speed
High voltage fast-switching PNP power transistor Features High voltage capability Very high switching speed 4 Application Electronics ballasts for fluorescent lighting Description 1 2 SOT-223 3 The device
More informationPart numbers Order codes Description Packages
ULQ2001 ULQ2003 - ULQ2004 Seven Darlington array Features Seven Darlington per package Extended temperature range: -40 to 105 C Output current 500 ma per driver (600 ma peak) Output voltage 50 V Automotive
More informationCPL-WB-00C2. Wide band directional coupler with ISO port. Features. Applications. Description. Benefits
Wide band directional coupler with ISO port Features 50 Ω nominal input / output impedance Wide operating frequency range (824 MHz to 2170 MHz) Low Insertion Loss (< 0.2 db) 34 db typical coupling factor
More informationAN2961 Application note
Application note STEVAL-ILL026V1 non-isolated 3 W offline LED driver based on the VIPER22A-E Introduction This application note describes the functioning of the STEVAL-ILL026V1 non-isolated 3 W offline
More informationAN1954 APPLICATION NOTE
AN1954 APPLICATION NOTE How to Extend the Operating Range of the CRX14 Contactless Coupler Chip This Application Note describes how to extend the operating range of the CRX14 Contactless Coupler Chip,
More informationUM0791 User manual. Demonstration firmware for the DMX-512 communication protocol receiver based on the STM32F103Zx. Introduction
User manual Demonstration firmware for the DMX-512 communication protocol receiver based on the STM32F103Zx Introduction This document describes how to use the demonstration firmware for the DMX-512 communication
More informationLow noise low drop voltage regulator with shutdown function. Part numbers
Low noise low drop voltage regulator with shutdown function Features Output current up to 150 ma Low dropout voltage (350 mv at I OUT = 50 ma) Very low quiescent current: 0.1 µa in OFF mode and max. 250
More informationObsolete Product(s) - Obsolete Product(s)
High gain Low Voltage PNP power transistor Features Very low Collector to Emitter saturation voltage D.C. Current gain, h FE >100 1.5 A continuous collector current Applications Power management in portable
More informationAN4112 Application note
Application note Using STM32F05xx analog comparators in application cases Introduction This document describes six application cases of the two analog comparators embedded in the ultra-low power STM32F05xx
More informationBUL743. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Features Low spread of dynamic parameters High voltage capability Minimum lot-to-lot spread for reliable operation Very high switching speed Applications
More informationST13003D-K. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Features High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation ery high switching speed Integrated antiparallel
More informationObsolete Product(s) - Obsolete Product(s)
High bandwidth switch with 20- to 10-bit MUX/DEMUX Datasheet - production data Features Low R ON : 4.0 Ω typical V CC operating range: 3.0 to 3.6 V Enhanced ESD protection: > 8 kv (contact) and 15 kv (HBM)
More informationAN2446 Application note
Application note STEVAL-IHT002V1 Intelligent thermostat for compressor based on ST7Ultralite MCU Introduction The STEVAL-IHT002V1 is a very low-cost evaluation board designed with the intent to replace
More informationLS1240. Electronic two-tone ringer. Features. Description. Pin connection (top view)
Electronic two-tone ringer Features Low current consumption, in order to allow the parallel operation of 4 devices Integrated rectifier bridge with zener diodes to protect against over voltages little
More informationAN2979 Application note
Application note Implementing a simple ADC using the STM8L101xx comparator Introduction This application note gives a simple method for implementing an A/D converter with a minimum amount of external components:
More informationAN3116 Application note
Application note STM32 s ADC modes and their applications Introduction STM32 microcontrollers have one of the most advanced ADCs on the microcontroller market. You could imagine a multitude of applications
More informationL4940xx5 L4940V5 L4940D2T5-TR 5 V L4940xx85 L4940V85 L4940P85 L4940D2T85-TR 8.5 V L4940xx10 L4940D2T10-TR 10 V L4940xx12 L4940D2T12-TR 12 V
Very low drop 1.5 A regulator Features Precise 5, 8.5, 10, 12 V outputs Low dropout voltage (450 mv typ. at 1 A) Very low quiescent current Thermal shutdown Short circuit protection Reverse polarity protection
More informationOrder code Temperature range Package Packaging Marking
Micropower quad CMOS voltage comparator Datasheet production data Features Extremely low supply current: 9 μa typ./comp. Wide single supply range 2.7 V to 16 V or dual supplies (±1.35 V to ±8 V) Extremely
More information