MIC BML MIC BML
|
|
- Mervyn Moody
- 5 years ago
- Views:
Transcription
1 MIC9/93 High Frequency PWM White LED Drivers with Internal Schottky Diode and OVP General Description The MIC9 and MIC93 are high frequency, Pulse Width Modulator (PWM) boost regulators optimized for constantcurrent, white LED driver applications. Because of their constant PWM switching frequencies of.6mhz and MHz, respectively, the MIC9/93 can use the smallest external components, allowing designers to avoid sensitive IF bands in their RF applications. The products feature an internal Schottky diode and two levels of output overvoltage protection allowing a small size and efficient DC/DC solution that requires only four external components. The.5V to V input voltage range of MIC9/3 allows direct operation from - and -cell Li Ion as well as 3- to 4-cell NiCad/NiMH/Alkaline batteries. The MIC9/3 products are available in a small size mm mm 8-lead MLF package and have a junction temperature range of 4 C to +5 C. All support documentation can be found on Micrel s web site at Features.5V to V input voltage Output voltage up to 34V Internal Schottky diode.6mhz PWM operation (MIC9).MHz PWM operation (MIC93) Stable with ceramic capacitors 5V and 34V output overvoltage protection options 5mA switch current rating 95mV feedback voltage <% line and load regulation <µa shutdown current Over-temperature protection UVLO 8-lead (mm mm) MLF package 4 C to +5 C junction temperature range Applications White LED driver for backlighting Cell phones PDAs GPS systems Digital cameras MP3 players IP phones Constant current power supplies Typical Application 5µH µh MIC9-5BML MIC93-5BML Li Ion µf 95mV 6.3Ω.µF 6V Li Ion µf 95mV 6.3Ω.µF 6V.6MHz PWM White LED Driver with 5V OVP MHz PWM White LED Driver with 5V OVP MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc. 8 Fortune Drive San Jose, CA 953 USA tel + (48) fax + (48) July 5 M
2 Ordering Information Marking Overvoltage Junction Part Number Code Protection Frequency Temp. Range Package Lead Finish MIC9-5BML A 5V.6MHz 4 C to +5 C 8-lead MLF Standard MIC9-5YML A 5V.6MHz 4 C to +5 C 8-lead MLF Pb-Free MIC9-34BML C 34V.6MHz 4 C to +5 C 8-lead MLF Standard MIC9-34YML C 34V.6MHz 4 C to +5 C 8-lead MLF Pb-Free MIC93-5BML SZA 5V MHz 4 C to +5 C 8-lead MLF Standard MIC93-5YML SZA 5V MHz 4 C to +5 C 8-lead MLF Pb-Free MIC93-34BML SZC 34V MHz 4 C to +5 C 8-lead MLF Standard MIC93-34YML SZC 34V MHz 4 C to +5 C 8-lead MLF Pb-Free Pin Configuration 8 P 7 EN 3 6 FB A 4 EP 5 NC 8-lead MLF (BML) (Top View) Fused Lead Frame Pin Description Pin Number Pin Name Pin Function Output pin and overvoltage protection (Output): Connect to the output capacitor and LEDs. Supply (Input): Input voltage. 3 EN Enable (Input): Logic high enables regulator. Logic low shuts down regulator. 5 NC No connect (no internal connection to die). 6 FB Feedback (Input): Output voltage sense node. Connect the cathode of the LED to this pin. A resistor from this pin to ground sets the LED current. 7 Switch node (Input): Internal power transistor collector. 4,8 Ground (Return): Ground. EP Ground (Return): Exposed backside pad. M July, 5
3 Absolute Maximum Ratings () Supply Voltage ( )... V Switch Voltage (V )....3V to 34V Enable Pin Voltage (V EN )....3 to FB Voltage (V FB )... 6V Switch Current (I )... A Ambient Storage Temperature (T S ) C to +5 C Schottky Reverse Voltage (V DA )... 34V ESD Rating (3)... kv Operating Ratings () Supply Voltage ( )...5V to V Output Voltage (V )... to V OVP Junction Temperature Range (T J )... 4 C to +5 C Package Thermal Impedance 8-lead MLF (θ JA ) C/W Electrical Characteristics (4) T A = 5ºC, = V EN = 3.6V, V = 5V, I = ma, unless otherwise noted. Bold values indicate 4ºC T J +5ºC. Symbol Parameter Condition Min Typ Max Units Supply Voltage Range.5 V V ULVO Under Voltage Lockout.8..4 V I Quiescent Current V FB > mv, (not switching).5 5 ma I SD Shutdown Current V EN = V (5). µa V FB Feedback Voltage (±5%) 9 95 mv I FB Feedback Input Current V FB = 95mV -45 na Line Regulation (6) 3V 5V.5 % Load Regulation (6) 5mA I ma.5 % D MAX Maximum Duty Cycle 85 9 % I Switch Current Limit 75 ma V Switch Saturation Voltage I =.5A 45 mv I Switch Leakage Current V EN = V, V = V. 5 µa V EN Enable Threshold TURN ON.5 V TURN OFF.4 V I EN Enable Pin Current V EN = V 4 µa f Oscillator Frequency MIC9 MIC93 V D Schottky Forward Drop I D = 5mA.8 V I RD Schottky Leakage Current V R = 3V 4 µa V OVP Overvoltage Protection MIC9/93-5 MIC9/93-34 T J Overtemperature Threshold Shutdown Hysteresis Notes:. Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. The maximum allowable power dissipation is a function of the maximum junction temperature, T J (max), the junction-to-ambient thermal resistance, θ JA, and the ambient temperature, T A. The maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.. This device is not guaranteed to operate beyond its specified operating ratings. 3. Devices are inherently ESD sensitive. Handling precautions required. Human body model. 4. Specification for packaged product only. 5. I SD = I. 6. Guaranteed by design MHz MHz V V C C July 5 3 M
4 Typical Characteristics FB VOLTAGE (mv) Feedback Voltage vs. Input Voltage (V) SHUTDOWN CURRENT (µa) Shutdown Current vs. Input Voltage (V) QUIESCENT CURRENT (ma) Quiescent Current vs. Input Voltage (V) ITCHING FREQUENCY (MHz) Switch Frequency IENABLE (µa) I = V 3 E N 5 I = 4.V 5 E N IE = 3.6V N EN Pin Bias Current 5 I = 3.V E N -5 5 SCHOTTKY FORWARD CURRENT (ma) Schottky Forward Voltage Drop SCHOTTKY FORWARD VOLTAGE DROP (mv) SCHOTTKY LEAKAGE CURRENT (µa) Schottky Reverse Leakage Current V R = 5V V R = 6V V R = V SATURATION VOLTAGE (mv) Saturation Voltage I S W = 5mA CURRENT LIMIT (ma) Current Limit 65 V =.5V IN ITCHING FREQUENCY (MHz) Switch Frequency SATURATION VOLTAGE (mv) Switch Saturation Voltage vs. Current =.5V = 5V I (ma) M July, 5
5 Functional Diagram FB EN OVP* V REF 95mV g m PWM Generator S.6MHz or.mhz Oscillator Ramp Generator MIC9/93 Block Diagram Functional Description The MIC9/93 is a constant frequency, PWM current mode boost regulator. The block diagram is shown above. The MIC9/93 is composed of an oscillator, slope compensation ramp generator, current amplifier, g m error amplifier, PWM generator, 5mA bipolar output transistor, and Schottky rectifier diode. The oscillator generates a.6mhz clock for the MIC9 and a.mhz clock for the MIC93. The clocks' two functions are to trigger the PWM generator that turns on the output transistor and to reset the slope compensation ramp generator. The current amplifier is used to measure the switch current by amplifying the voltage signal from the internal sense resistor. The output of the current amplifier is summed with the output of the slope compensation ramp generator. This summed current-loop signal is fed to one of the inputs of the PWM generator. The g m error amplifier measures the LED current through the external sense resistor and amplifies the error between the detected signal and the 95mV reference voltage. The output of the g m error amplifier provides the voltage-loop signal that is fed to the other input of the PWM generator. When the current-loop signal exceeds the voltage-loop signal, the PWM generator turns off the bipolar output transistor. The next clock period initiates the next switching cycle, maintaining the constant frequency current-mode PWM control. The LED is set by the feedback resistor: I LED = 95mv R FB The Enable pin shuts down the output switching and disables control circuitry to reduce input current to leakage levels. Enable pin input current is zero at zero volts. July 5 5 M
6 External Component Selection The MIC9/93 can be used across a wide rage of applica- tions. The table below shows recommended inductor and output capacitor values for various series-led applications: Series LEDs L Manufacturer Min C Manufacturer µh LQH3CNK (Murata).µF 85ZD5KAT(AVX) NLC4533T-K(TDK) GRM4X5R5K(Murata) 5µH LQH3CN5K (Murata) µf 85ZD5KAT(AVX) NLC4533T-5K(TDK) GRM4X5R5K(Murata) µh LQH3CNK (Murata).µF 85ZD4KAT(AVX) NLC4533T-K(TDK) GRM4X5R4K(Murata) 6.8µH LQH3CN6R8K (Murata).µF 85ZD5KAT(AVX) NLC4533T-6R8K(TDK) GRM4X5R5K(Murata) 4.7µH LQH3CN4R7K (Murata).µF 85ZD4KAT(AVX) NLC4533T-4R7K(TDK) GRM4X5R4K(Murata) 3 µh LQH43MNK (Murata).µF 85YD5MAT(AVX) NLC4533T-K(TDK) GRM4X5R5K6(Murata) 5µH LQH43MN 5K (Murata) µf 85YD5MAT(AVX) NLC4533T-5K(TDK) GRM4X5R5K6(Murata) µh LQH43MN K (Murata).µF 85YD4MAT(AVX) NLC4533T-K(TDK) GRM4X5R4K6(Murata) 6.8µH LQH43MN 6R8K (Murata).µF 85YD4MAT(AVX) NLC4533T-6R8K(TDK) GRM4X5R4K6(Murata) 4.7µH LQH43MN 4R7K (Murata).7µF 85YD74MAT(AVX) NLC4533T-4R7K(TDK) GRM4X5R4K6(Murata) 4 µh LQH43MNK (Murata) µf 85YD5MAT(AVX) NLC4533T-K(TDK) GRM4X5R5K5(Murata) 5µH LQH43MN 5K (Murata) µf 85YD5MAT(AVX) NLC4533T-5K(TDK) GRM4X5R5K5(Murata) µh LQH43MN K (Murata).7µF 85YD74MAT(AVX) NLC4533T-K(TDK) 6.8µH LQH43MN 6R8K (Murata).7µF 85YD74MAT(AVX) NLC4533T-6R8K(TDK) 4.7µH LQH43MN 4R7K (Murata).7µF 85YD74MAT(AVX) NLC4533T-4R7K(TDK) 5, 6 µh LQH43MNK (Murata).µF 853D4MAT(AVX) NLC4533T-K(TDK) GRM4X5R4K5(Murata) 5µH LQH43MN 5K (Murata).µF 853D4MAT(AVX) NLC4533T-5K(TDK) GRM4X5R4K5(Murata) µh LQH43MN K (Murata).7µF 853D74MAT(AVX) NLC4533T-K(TDK) 6.8µH LQH43MN 6R8K (Murata).7µF 853D74MAT(AVX) NLC4533T-6R8K(TDK) 4.7µH LQH43MN 4R7K (Murata).7µF 853D74MAT(AVX) NLC4533T-4R7K(TDK) 7, 8 µh LQH43MNK (Murata).µF 853D4MAT(AVX) NLC4533T-K(TDK) GRM4X5R4K5(Murata) 5µH LQH43MN 5K (Murata).µF 853D4MAT(AVX) NLC4533T-5K(TDK) GRM4X5R4K5(Murata) µh LQH43MN K (Murata).7µF 853D74MAT(AVX) NLC4533T-K(TDK) 6.8µH LQH43MN 6R8K (Murata).7µF 853D74MAT(AVX) NLC4533T-6R8K(TDK) 4.7µH LQH43MN 4R7K (Murata).7µF 853D74MAT(AVX) NLC4533T-4R7K(TDK) M July, 5
7 Dimming Control There are two techniques for dimming control. One is PWM dimming and the other is continuous dimming.. PWM dimming control is implemented by applying a PWM signal on EN pin as shown in Figure. The MIC9/93 is turned on and off by the PWM signal. With this method, the LEDs operate with either zero or full current. The average LED current is increased proportionally to the duty-cycle of the PWM signal. This technique has high-efficiency because the IC and the LEDs consume no current during the off cycle of the PWM signal. Typical frequency should be between Hz and khz.. Continuous dimming control is implemented by applying a DC control voltage to the FB pin of the MIC9/93 through a series resistor as shown in Figure. The LED current is decreased proportionally with the amplitude of the control voltage. The LED intensity (current) can be dynamically varied applying a DC voltage to the FB pin. The DC voltage can come from a DAC signal or a filtered PWM signal. The advantage of this approach is that a high frequency PWM signal (>khz) can be used to control LED intensity. Open-Circuit Protection If the LEDs are disconnected from the circuit, or in case an LED fails open, the sense resistor will pull the FB pin to ground. This will cause the MIC9/93 to switch with a high duty-cycle resulting in output overvoltage. This may cause the pin voltage to exceed its maximum voltage rating, possibly damaging the IC and the external components. To ensure the highest level of protection, the MIC9/93 has three product options in the 8-lead MLF with overvoltage protection, OVP. The extra pins of the 8-leadMLF package allow the use of a dedicated OVP monitor with options for 5V or 34V (see Figure 3). The reason for the three OVP levels is to let users choose the suitable level of OVP for their application. For example, a 3-LED application would typically see an output voltage of no more than V, so a 5V OVP option would offer a suitable level of protection. This allows the user to select the output diode and capacitor with the lowest voltage ratings, and accordingly, smallest size and lowest cost. The OVP will clamp the output voltage to within the specified limits. PWM Figure. PWM Dimming Method Figure 3. MLF Package OVP Circuit Start-Up and Inrush Current During start-up, inrush current of approximately double the nominal current flows to set up the inductor current and the voltage on the output capacitor. If the inrush current needs to be limited, a soft-start circuit similar to Figure 4 could be implemented. The soft-start capacitor, C ss, provides overdrive to the FB pin at start-up, resulting in gradual increase of switch duty cycle and limited inrush current. 5.k 49.9k C SS pf DC Equivalent Figure. Continuous Dimming R k Figure 4. Soft-Start Circuit July 5 7 M
8 Functional Characteristics 6-Series LED Circuit with External Soft-Start 6-Series LED Circuit without External Soft-Start PUT VOL AGE INPUT CURRENT ENABLE (ma/div) (V/div) L = µh C IN = µf C =.µf = 3.6V I = ma 6 LEDs C SS = pf R = kω PUT VOL AGE INPUT CURRENT ENABLE (ma/div) (V/div) L = µh C IN = µf C =.µf = 3.6V I = ma 6 LEDs TIME (µs/div.) TIME (µs/div.) M July, 5
9 Package Information 8-lead MLF (BML) MICREL INC. 8 FORTUNE DRIVE SAN JOSE, CA 953 USA TEL + (48) FAX + (48) 474- WEB This information furnished by Micrel in this data sheet is believed to be accurate and reliable. However no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. 4 July 5 9 M
MIC YML MIC YML
MIC2292/93 High Frequency PWM White LED Drivers with Internal Schottky Diode and OP General Description The MIC2292 and MIC2293 are high frequency, Pulse Width Modulator (PWM) boost regulators optimized
More informationFeatures. Applications
White LED Driver Internal Schottky Diode and OVP General Description The is a PWM (pulse width modulated), boostswitching regulator that is optimized for constant-current white LED driver applications.
More informationFeatures. Applications
White LED Driver Internal Schottky Diode and OVP General Description The is a PWM (pulse width modulated), boostswitching regulator that is optimized for constant-current white LED driver applications.
More informationMIC2287. Features. General Description. Applications. Typical Application. 1.2MHz PWM White LED Driver with OVP in 2mm 2mm MLF and Thin SOT-23
MIC2287 1.2MHz PWM White LED Driver with OVP in 2mm 2mm MLF and Thin SOT-23 General Description The MIC2287 is a 1.2MHz pulse width modulated (PWM), boost-switching regulator that is optimized for constantcurrent,
More informationMIC2287. Features. General Description. Applications. Typical Application CMDSH MHz PWM White LED Driver with OVP in 2mm 2mm MLF and Thin SOT-23
MIC2287 1.2MHz PWM White LED Driver with OVP in 2mm 2mm MLF and Thin SOT-23 General Description The MIC2287 is a 1.2MHz pulse width modulated (PWM), boost-switching regulator that is optimized for constantcurrent,
More informationMIC2290. General Description. Features. Applications. Typical Application. 2mm 2mm PWM Boost Regulator with Internal Schotty Diode
2mm 2mm PWM Boost Regulator with Internal Schotty Diode General Description The is a 1.2MHz, PWM, boost-switching regulator housed in the small size 2mm 2mm 8-pin MLF package. The features an internal
More informationMIC2296. General Description. Features. Applications. High Power Density 1.2A Boost Regulator
High Power Density 1.2A Boost Regulator General Description The is a 600kHz, PWM dc/dc boost switching regulator available in a 2mm x 2mm MLF package option. High power density is achieved with the s internal
More informationMIC2291. General Description. Features. Applications. Typical Application. 1.2A PWM Boost Regulator Photo Flash LED Driver
1.2A PWM Boost Regulator Photo Flash LED Driver General Description The is a 1.2MHz Pulse Width Modulation (PWM), boost-switching regulator that is optimized for high-current, white LED photo flash applications.
More informationMIC2295. Features. General Description. Applications. High Power Density 1.2A Boost Regulator
High Power Density 1.2A Boost Regulator General Description The is a 1.2Mhz, PWM dc/dc boost switching regulator available in low profile Thin SOT23 and 2mm x 2mm MLF package options. High power density
More informationMIC3289. General Description. Features. 1.2MHz PWM White LED Driver with Internal Schottky Diode and True 1-Wire Digital Control.
1.2MHz PWM White LED Driver with Internal Schottky Diode and True 1-Wire Digital Control General Description The is a PWM boost-switching regulator that is optimized for constant-current white LED driver
More informationMIC2298. Features. General Description. Applications. Typical Application. 3.5A Minimum, 1MHz Boost High Brightness White LED Driver
3.5A Minimum, 1MHz Boost High Brightness White LED Driver General Description The is a high power boost-switching regulator that is optimized for constant-current control. The is capable of driving up
More informationMIC2299. Features. General Description. Applications. Typical Application. 3.5A Minimum, 2MHz High Brightness LED Driver
3.5A Minimum, 2MHz High Brightness LED Driver General Description The is a high power boost-switching regulator that is optimized for constant-current control. The is capable of driving up to 2 series
More informationFeatures. Applications. 1.2MHz Boost Converter with OVP in Thin SOT-23-6
1.2MHz PWM Boost Converter with OVP General Description The is a 1.2MHz pulse width modulated (PWM) step-up switching regulator that is optimized for low power, high output voltage applications. With a
More informationMIC2601/2. Features. General Description. Applications. Typical Application. 1.2A, 1.2MHz/2MHz Wide Input Range Integrated Switch Boost Regulator
1.2A, 1.2MHz/2MHz Wide Input Range Integrated Switch Boost Regulator General Description The is a 1.2MHz/2MHz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF package. High power density
More informationMIC2605/6. Features. General Description. Applications. Typical Application
0.5A,.2MHz / 2MHz Wide Input Range Boost Regulator with Integrated Switch and Schottky Diode General Description The is a.2mhz/2mhz, PWM DC/DC boost switching regulator available in a 2mm x 2mm MLF package.
More informationFeatures SLEW ENA ELA VDD. 332k ELB RSW MIC M COM REL ENB GND. VIN Li Ion 3V to 4.2V 2.2nF 250V. Low Noise Dual EL Driver
Low Noise Dual 22 V PP Driver With Output Voltage Slew Rate Control General Description The is a low noise dual Electroluminescent () Panel driver used in backlighting applications. The converts a low
More informationMIC2245. Features. General Description. Applications. Typical Application. 4MHz PWM Synchronous Buck Regulator with LDO Standby Mode
4MHz PWM Synchronous Buck Regulator with LDO Standby Mode General Description The Micrel is a high efficiency 4MHz pulse width modulated (PWM) synchronous buck (stepdown) regulator that features a LOWQ
More informationFeatures. R1 10k. 10nF. R2 3.83k
High Efficiency 1MHz Synchronous Buck Regulator General Description The Micrel is a high efficiency 1MHz PWM synchronous buck switching regulator. The features low noise constant frequency PWM operation
More informationMIC3385. General Description. Features. Applications. Typical Application. 8MHz Inductorless Buck Regulator with LDO Standby Mode
8MHz Inductorless Buck Regulator with LDO Standby Mode General Description The Micrel is a high efficiency inductorless buck regulator that features a LOWQ LDO standby mode that draws only 18µA of quiescent
More informationFeatures. Applications
MIC532 15mA ULDO in Ultra-Small 1.2mm x 1.6mm Thin MLF General Description The MIC532 is an ultra-small, ultra-low dropout CMOS regulator, ULDO that is ideal for today s most demanding portable applications
More informationMIC General Description. Features. Applications: Typical Application. 1A High Speed Low VIN LDO
1A High Speed Low VIN LDO General Description The is a high speed, Low V IN LDO capable of delivering up to 1A and designed to take advantage of point of load applications that use multiple supply rails
More informationMIC2251. General Description. Features. Applications. Typical Application. High-Efficiency Low EMI Boost Regulator
High-Efficiency Low EMI Boost Regulator General Description The is a general purpose DC/DC boost switching regulator that features low noise, EMI reduction circuitry, and high efficiency across a wide
More informationFeatures. Applications. V OUT
MIC535 5mA µcap Ultra-Low Dropout LDO Regulator General Description The MIC535 is a high-performance, 5mA LDO regulator, offering extremely high PSRR and very low noise while consuming low ground current.
More informationMIC Features. General Description. Applications. Typical Application. Dual High Side Power Switches
Dual High Side Power Switches General Description The are dual high-side load switches designed for operation between 1.7V to 5.5V. The devices contain a pair of low on-resistance, 115mΩ(max) P-channel
More informationMIC2238. General Description. Features. Applications. Typical Application. 2.5MHz Dual Phase PWM Buck Regulator
2.5MHz Dual Phase PWM Buck Regulator General Description The Micrel is dual output 2-phase synchronous buck (step down) PWM DC/DC switching regulator. Power conversion efficiencies of above 95% are easily
More informationFeatures V IN LM2574 OUT PWR GND SIG GND ON/ 11DQ05 OFF. Figure 1. Fixed Output Regulator Circuit
52kHz Simple.5A Buck Regulator General Description The family is a series of easy to use fixed and adjustable switching voltage regulators. The contains all of the active circuitry necessary to construct
More informationMIC4827. Features. General Description. Applications. Typical Application. Low Input Voltage, 180V PP Output Voltage, EL Driver
Low Input Voltage, 10V PP Output Voltage, EL Driver General Description Micrel s is a high output voltage, DC to AC converter, designed for driving EL (Electroluminescent) lamps. The device operates from
More informationMIC69101/103. General Description. Features. Applications. Typical Application. Single Supply V IN, LOW V IN, LOW V OUT, 1A LDO
MIC6911/13 Single Supply V IN, LOW V IN, LOW V OUT, 1A LDO General Description The MIC6911/13 is the 1A output current member of the MIC69xxx family of high current, low voltage regulators, which support
More informationMIC5225. General Description. Features. Applications. Typical Application. Ultra-Low Quiescent Current 150mA µcap Low Dropout Regulator
Ultra-Low Quiescent Current 15mA µcap Low Dropout Regulator General Description The is a 15mA highly accurate, low dropout regulator with high input voltage and ultra-low ground current. This combination
More informationMIC69151/153. General Description. Features. Applications. Typical Application. Single Supply V IN, Low V IN, Low V OUT, 1.5A LDO
Single Supply V IN, Low V IN, Low V OUT, 1.5A LDO General Description The is the 1.5A output current member of the MIC69xxx family of high current, low voltage regulators, which support currents of 1A,
More informationFeatures MIC2194BM VIN EN/ UVLO CS OUTP VDD FB. 2k COMP GND. Adjustable Output Buck Converter MIC2194BM UVLO
MIC2194 400kHz SO-8 Buck Control IC General Description s MIC2194 is a high efficiency PWM buck control IC housed in the SO-8 package. Its 2.9V to 14V input voltage range allows it to efficiently step
More informationSGM3736 PWM Dimming, 38V Step-Up LED Driver
GENERAL DESCRIPTION The SGM3736 is a versatile constant current LED driver with a high efficiency step-up converter architecture. The low-side power MOSFET is integrated in the device, significantly shrinking
More informationMIC5385. Features. General Description. Applications. Typical Application. Ultra Small Triple 150mA Output LDO
Ultra Small Triple 1 Output LDO General Description The is an advanced general purpose triple linear regulator offering high power supply rejection (PSRR) in an ultra-small 2mm x 2mm 8 pin Thin MLF package.
More informationTFT-LCD DC/DC Converter with Integrated Backlight LED Driver
TFT-LCD DC/DC Converter with Integrated Backlight LED Driver Description The is a step-up current mode PWM DC/DC converter (Ch-1) built in an internal 1.6A, 0.25Ω power N-channel MOSFET and integrated
More informationFeatures. Applications
High Input Voltage Low IQ µcap LDO Regulator General Description The is a 100mA highly accurate, low dropout regulator with high input voltage and ultra-low ground current. This combination of high voltage
More informationMIC5365/6. General Description. Features. Applications. Typical Application. High-Performance Single 150mA LDO
High-Performance Single 150mA LDO General Description The is an advanced general purpose linear regulator offering high power supply rejection (PSRR) in an ultra-small 1mm 1mm package. The MIC5366 includes
More informationMIC5387. Features. General Description. Applications. Typical Application. Ultra-Small Triple 150mA Output LDO
Ultra-Small Triple Output LDO General Description The is an advanced, general-purpose, triple linear regulator offering high power supply rejection (PSRR) in an ultra-small, 6-pin, 1.6mm x 1.6mm Thin MLF
More informationMIC2141. General Description. Features. Applications. Typical Application. Micropower Boost Converter
Micropower Boost Converter General Description The is a micropower boost switching regulator that can operate from 3- or 4-cell nickel-metal-hydride batteries or a single Li-ion cell. This regulator employs
More informationMIC5309. Features. General Description. Applications. Typical Application. Low V IN /V OUT 300mA High PSRR ULDO with Ultra-Low IQ
Low V IN /V OUT 3mA High PSRR ULDO with Ultra-Low IQ General Description The is a high performance, µcap low dropout regulator, offering ultra-low operating current while maintaining very fast transient
More informationFeatures MIC2193BM. Si9803 ( 2) 6.3V ( 2) VDD OUTP COMP OUTN. Si9804 ( 2) Adjustable Output Synchronous Buck Converter
MIC2193 4kHz SO-8 Synchronous Buck Control IC General Description s MIC2193 is a high efficiency, PWM synchronous buck control IC housed in the SO-8 package. Its 2.9V to 14V input voltage range allows
More informationMIC2253. General Description. Features. Applications. Typical Application. 3.5A 1MHz High Efficiency Boost Regulator with OVP and Softstart
3.5A MHz High Efficiency Boost Regulator with OVP and Softstart General Description The is a high power density MHz PWM DC/DC boost regulator. The 3.5A minimum switch current limit combined with a MHz
More informationMIC37150/51/52/53. General Description. Features. Applications. Typical Application. 1.5A, Low Voltage µcap LDO Regulator
1.5A, Low Voltage µcap LDO Regulator General Description The Micrel is a 1.5A low-dropout linear voltage regulator that provides a low voltage, high current output with a minimum of external components.
More informationFeatures. MIC2212-xxBML VOUT2 POR CBYP SET GND. MIC2212 Typical Cell Phone Application
MIC2212 Dual µcap LDO and Power-On Reset General Description The MIC2212 is a dual µcap low dropout regulator with power-on reset circuit. The first regulator is capable of sourcing 15mA, while the second
More informationMIC94090/1/2/3/4/5. Features. General Description. Applications. Typical Application. High Side Load Switches for Consumer Applications
High Side Load Switches for Consumer Applications General Description The is a family of high-side load switches designed for operation from 1.7V to 5.5V input voltage. The load switch pass element is
More informationMIC Features. General Description. Applications. Typical Application. 4MHz PWM Buck Regulator with HyperLight Load and Voltage Scaling
4MHz PWM Buck Regulator with HyperLight Load and Voltage Scaling General Description The Micrel is a high efficiency 600mA PWM synchronous buck (step-down) regulator featuring HyperLight Load, a patented
More informationMIC2196. Features. General Description. Applications. Typical Application. 400kHz SO-8 Boost Control IC
400kHz SO-8 Boost Control IC General Description Micrel s is a high efficiency PWM boost control IC housed in a SO-8 package. The is optimized for low input voltage applications. With its wide input voltage
More informationFeatures. Applications V IN ENABLE SHUTDOWN. C IN = 1.0µF
300mA High PSRR, Low Noise µcap CMOS LDO General Description The is an efficient CMOS voltage regulator optimized for low-noise applications. It offers 1.5% initial accuracy, low dropout voltage (300mV
More informationMIC5375/6/7/8. General Description. Features. Applications. Typical Application. High Performance Low Dropout 150mA LDO
High Performance Low Dropout 150mA LDO General Description The is an advanced general purpose linear regulator offering low dropout in an ultra small package. The MIC5375/6 provides fixed output voltage
More informationRT V DC-DC Boost Converter. Features. General Description. Applications. Ordering Information. Marking Information
RT8580 36V DC-DC Boost Converter General Description The RT8580 is a high performance, low noise, DC-DC Boost Converter with an integrated 0.5A, 1Ω internal switch. The RT8580's input voltage ranges from
More informationBuilt-In OVP White LED Step-up Converter in Tiny Package
Built-In White LED Step-up Converter in Tiny Package Description The is a step-up DC/DC converter specifically designed to drive white LEDs with a constant current. The device can drive up to 4 LEDs in
More informationFeatures. MIC5318-x.xYMT EN BYP GND. Portable Application
High Performance 3mA µcap ULDO General Description The is a high performance, single output ultra low drop-out (ULDO ) regulator, offering low total output noise in an ultra-small Thin MLF package. The
More informationFeatures. MIC5301-x.xYMT EN BYP GND. Portable Application
Single, 1mA µcap ULDO General Description The is a high performance, single output ultra low LDO (ULDO ) regulator, offering low total output noise. The is capable of sourcing 1mA output current and offers
More informationMIC2142. General Description. Features. Applications. Typical Application. Micropower Boost Converter
Micropower Boost Converter General Description The is a micropower boost switching regulator housed in a SOT3-5 package. The input voltage range is between.v to 16V, making the device suitable for onecell
More informationFeatures. 5V Reference UVLO. Oscillator S R GND*(AGND) 5 (9) ISNS 3 (5)
MIC38HC42/3/4/5 BiCMOS 1A Current-Mode PWM Controllers General Description The MIC38HC4x family are fixed frequency current-mode PWM controllers with 1A drive current capability. Micrel s BiCMOS devices
More informationSGM V Step-Up LED Driver
GENERAL DESCRIPTION The SGM3725 is a versatile constant current LED driver with a high efficiency step-up converter architecture. Unique technology and high 1.35A current limit allow SGM3725 to drive up
More informationFeatures. Applications
High PSRR Low Noise 300mA µcap Ultra-Low Dropout LDO Regulator General Description The is a high-performance, 300mA LDO regulator, offering extremely high PSRR and very low noise while consuming low ground
More informationUM1660. Low Power DC/DC Boost Converter UM1660S SOT23-5 UM1660DA DFN AAG PHO. General Description
General Description Low Power DC/DC Boost Converter S SOT23-5 DA DFN6 2.0 2.0 The is a PFM controlled step-up DC-DC converter with a switching frequency up to 1MHz. The device is ideal to generate output
More informationThe ASD5001 is available in SOT23-5 package, and it is rated for -40 to +85 C temperature range.
General Description The ASD5001 is a high efficiency, step up PWM regulator with an integrated 1A power transistor. It is designed to operate with an input Voltage range of 1.8 to 15V. Designed for optimum
More informationMIC2215. Features. General Description. Applications. Typical Application. Triple High PSRR, Low Noise µcap LDO
Triple High PSRR, Low Noise µcap LDO General Description The is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current. Ideal for battery
More informationMIC94040/1/2/3. Features. General Description. Applications. Typical Application. 28mΩ R DSON 3A High Side Load Switch in 1.2mm x 1.
28mΩ R DSON 3A High Side Load Switch in 1.2mm x 1.2mm MLF package General Description The is a family of high-side load switches designed to operate from 1.7V to 5.5V input voltage. The load switch pass
More informationMP MHz, 700mA, Fixed-Frequency Step-Up Driver for up to 10 White LEDS
MP3301 1.3MHz, 700mA, Fixed-Frequency Step-Up Driver for up to 10 White LEDS DESCRIPTION The MP3301 is a step-up converter designed to drive WLEDS arrays from a single-cell, lithium-ion battery. The MP3301
More informationMIC29510/ General Description. Features. Applications. Typical Application. 5A Fast-Response LDO Regulator
5A Fast-Response LDO Regulator General Description The MIC29510 and MIC29512 are high-current, highaccuracy, low-dropout voltage regulators featuring fast transient recovery from input voltage surges and
More informationConstant Current Switching Regulator for White LED
Constant Current Switching Regulator for White LED FP7201 General Description The FP7201 is a Boost DC-DC converter specifically designed to drive white LEDs with constant current. The device can support
More informationRT8509A. 4.5A Step-Up DC/DC Converter. General Description. Features. Applications. Ordering Information. Marking Information
RT8509A 4.5A Step-Up DC/DC Converter General Description The RT8509A is a high performance switching Boost converter that provides a regulated supply voltage for active matrix thin film transistor (TFT)
More informationPWM Step-Up DC/DC Converter for Panel Backlight. Features. Fig. 1
PWM Step-Up DC/DC Converter for Panel Backlight General Description The designed with high efficiency step up DC/DC converter for driving white LEDs. The device can drive up 11 white LEDs from a single
More informationFeatures. Applications
IttyBitty Integrated High-Side Switch General Description The is an integrated high-side power switch that consists of a TTL compatible input and protected P- channel MOSFET. The can be used instead of
More informationFeatures. Applications
High-Current Low-Dropout Regulators General Description The is a high current, high accuracy, lowdropout voltage regulators. Using Micrel's proprietary Super βeta PNP process with a PNP pass element, these
More informationMIC5316. General Description. Features. Applications. Typical Application. Low Voltage Dual 300mA LDO with Power on Reset and Voltage Select
Low Voltage Dual 300mA LDO with Power on Reset and Voltage Select General Description The is a high performance, dual low input voltage, low dropout regulator with Power On Reset (POR) and voltage select.
More informationACT6311. White LED/OLED Step-Up Converter FEATURES
White LED/OLED Step-Up Converter FEATURES Adjustable Output Voltage Drives OLEDs or White LEDs 30V High Voltage Switch 1MHz Switching Frequency Tiny Inductors and Capacitors Tiny SOT23-5 Package APPLICATIONS
More informationRT A, 2MHz, Synchronous Step-Down Converter. General Description. Features. Applications. Ordering Information. Pin Configurations
4A, 2MHz, Synchronous Step-Down Converter General Description The is a high efficiency synchronous, step-down DC/DC converter. Its input voltage range is from 2.7V to 5.5V and provides an adjustable regulated
More informationESMT/EMP Preliminary EMD2055
Preliminary EMD2055 PWM Step-Up DC/DC Converter for Panel Backlight (11 WLEDs Driver) General Description The EMD2055 is a highly efficient, step-up DC/DC converter for driving white LEDs. The device can
More informationFeatures. RAMP Feed Forward Ramp/ Volt Sec Clamp Reference & Isolation. Voltage-Mode Half-Bridge Converter CIrcuit
MIC3838/3839 Flexible Push-Pull PWM Controller General Description The MIC3838 and MIC3839 are a family of complementary output push-pull PWM control ICs that feature high speed and low power consumption.
More informationRT4503/A. Asynchronous Boost Converter for 10 WLEDs. Features. General Description. Ordering Information. Applications. Simplified Application Circuit
Asynchronous Boost Converter for 1 WLEDs General Description The is a highly integrated LED driver IC capable of driving 1 WLEDs in series. It is composed of a current mode Boost converter integrated with
More informationMIC5238. General Description. Features. Applications. Typical Application. Ultra-Low Quiescent Current, 150mA µcap LDO Regulator
Ultra-Low Quiescent Current, 150mA µcap LDO Regulator General Description The is an ultra-low voltage output, 150mA LDO regulator. Designed to operate in a single supply or dual supply mode, the consumes
More informationHigh-Efficiency, 40V White LED Driver with Dimming Control
High-Efficiency, 40V White LED Driver with Dimming Control Description The is a step-up DC/DC converter specifically designed for driving WLEDs with a constant current. The can drive up 10 white LEDs in
More informationFeatures MIC BN FB. Fixed Regulator
MIC44 200kHz Simple 0.A Buck Regulator General Description The MIC44 is a series of easy to use fixed and adjustable BiCMOS step-down (buck) switch-mode voltage regulators. The 200kHz MIC44 duplicates
More informationFAN5340 Synchronous Constant-Current Series Boost LED Driver with PWM Brightness Control and Integrated Load Disconnect
April 2010 FAN5340 Synchronous Constant-Current Series Boost LED Driver with PWM Brightness Control and Integrated Load Disconnect Features Synchronous Current-Mode Boost Converter Up to 500mW Output Power
More informationMIC5396/7/8/9. General Description. Features. Applications. Typical Application. Low-Power Dual 300mA LDO in 1.2mm x 1.
Low-Power Dual 300mA LDO in 1.2mm x 1.6mm Extra Thin DFN General Description The is an advanced dual LDO ideal for powering general purpose portable devices. The provides two high-performance, independent
More informationA8431. White LED Driver Constant Current Step-up Converter
Features and Benefits Output voltage up to 32 V ( level) 2. to 0 V input Drives up to 4 LEDs at 20 ma from a 2. V supply Drives up to LEDs at 20 ma from a 3 V supply.2 MHz switching frequency 300 ma switch
More informationAT V 5A Synchronous Buck Converter
FEATURES DESCRIPTION Wide 8V to 38V Operating Input Range Integrated 80mΩ Power MOSFET Switches Output Adjustable from VFB(1V) to 20V Up to 95% Efficiency Internal Soft-Start Stable with Low ESR Ceramic
More informationMIC5248. Features. General Description. Applications. Typical Application. 150mA µcap CMOS LDO Regulator w/power Good VIN VOUT C OUT GND
150mA µcap CMOS LDO Regulator w/power Good General Description The is an efficient, general purpose 1.2V CMOS voltage regulator with a power good output function. The offers better than 3%initial accuracy,
More informationMIC3975. General Description. Features. Applications. Ordering Information. Typical Applications. 750mA µcap Low-Voltage Low-Dropout Regulator
MIC3975 750mA µcap Low-Voltage Low-Dropout Regulator General Description The MIC3975 is a 750mA low-dropout linear voltage regulators that provide low-voltage, high-current output from an extremely small
More informationFeatures. Applications. Adjustable Regulator Application. (*See Minimum Load Current Section)
3A, Low Voltage µcap LDO Regulator General Description The is a 3A low-dropout linear voltage regulator that provides a low voltage, high current output with a minimum of external components. It offers
More informationPWM Step-Up DC/DC Converter for Panel Backlight. Applications. Features. Fig. 1
PWM Step-Up DC/DC Converter for Panel Backlight General Description The is a highly efficient, step-up DC/DC converter for driving white LEDs. The device can drive up to 9 serially connected white LEDs
More informationMIC38C42A/43A/44A/45A
MIC38C42A/43A/44A/45A BiCMOS Current-Mode PWM Controllers General Description The MIC38C4xA are fixed frequency, high performance, current-mode PWM controllers. Micrel s BiCMOS devices are pin compatible
More informationMIC5501/2/3/4. General Description. Features. Applications. Typical Application. Single 300mA LDO in 1.0mm 1.0mm DFN Package
Single 300mA LDO in 1.0mm 1.0mm DFN Package General Description The is an advanced general-purpose LDO ideal for powering general-purpose portable devices. The family of products provides a highperformance
More informationMIC General Description. Features. Applications. Typical Application. 5A, Low V IN, Low V OUT µcap LDO Regulator
MIC6952, Low V IN, Low V OUT µcap LDO Regulator General Description The MIC6952 is a, low dropout linear regulator that provides low voltage high current outputs with a minimum of external components.
More informationRT9285A/B. Tiny Package, High Performance, Diode Embedded White LED Driver. Preliminary. Features. General Description.
General Description The RT9285 is a high frequency asynchronous boost converter with internal diode, which can support 2 to 5 White LEDs for backlighting and OLED power supply. The Internal soft start
More informationMP A, 55V, 100kHz Step-Down Converter with Programmable Output OVP Threshold
The Future of Analog IC Technology MP24943 3A, 55V, 100kHz Step-Down Converter with Programmable Output OVP Threshold DESCRIPTION The MP24943 is a monolithic, step-down, switch-mode converter. It supplies
More informationFAN MHz TinyBoost Regulator with 33V Integrated FET Switch
FAN5336 1.5MHz TinyBoost Regulator with 33V Integrated FET Switch Features 1.5MHz Switching Frequency Low Noise Adjustable Output Voltage Up to 1.5A Peak Switch Current Low Shutdown Current:
More informationFeatures MIC5236 GND. Regulator with Adjustable Output
MIC56 Low Quiescent Current µcap LDO Regulator General Description The MIC56 is a low quiescent current, µcap low-dropout regulator. With a maximum operating input voltage of V and a quiescent current
More informationMIC General Description. Features. Applications. Typical Application. HELDO 1.5A High Efficiency Low Dropout Regulator
HELDO 1.5A High Efficiency Low Dropout Regulator General Description The is a 1.5A continuous output current step down converter. This is a follow on product in the new HELDO (High Efficiency Low DropOut
More informationMIC5524. Features. General Description. Applications. Typical Application. High-Performance 500mA LDO in Thin DFN Package
High-Performance 500mA LDO in Thin DFN Package General Description The is a low-power, µcap, low dropout regulator designed for optimal performance in a very-small footprint. It is capable of sourcing
More informationMIC5235. General Description. Features. Applications. Typical Application. Ultra-Low Quiescent Current, 150mA µcap LDO Regulator
MIC535 Ultra-Low Quiescent Current, 5mA µcap LDO Regulator General Description The MIC535 is a 5mA highly accurate, low dropout regulator with high input voltage and ultra-low ground current. This combination
More informationMP A,1MHz, Synchronous, Step-up Converter with Output Disconnect
The Future of Analog IC Technology MP3414 1.8A,1MHz, Synchronous, Step-up Converter with Output Disconnect DESCRIPTION The MP3414 is a high-efficiency, synchronous, current mode, step-up converter with
More informationHigh-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
19-2731; Rev 1; 10/03 EVALUATION KIT AVAILABLE High-Efficiency, 26V Step-Up Converters General Description The step-up converters drive up to six white LEDs with a constant current to provide backlight
More informationMIC4414/4415. General Description. Features. Applications. Typical Application. 1.5A, 4.5V to 18V, Low-Side MOSFET Driver
MIC4414/4415 1.5A, 4.5V to 18V, Low-Side MOSFET Driver General Description The MIC4414 and MIC4415 are low-side MOSFET drivers designed to switch an N-channel enhancement type MOSFET in low-side switch
More informationRT8463. High Voltage Multi-Topology LED Driver. General Description. Features. Applications. Ordering Information. Marking Information RT8463GCP
High Voltage Multi-Topology LED Driver General Description The is a current mode PWM regulator for LED driving applications. With a A power switch, wide input voltage (4.5V to 50V) and output voltage (up
More informationLow-Noise 4.5A Step-Up Current Mode PWM Converter
Low-Noise 4.5A Step-Up Current Mode PWM Converter FP6298 General Description The FP6298 is a current mode boost DC-DC converter. It is PWM circuitry with built-in 0.08Ω power MOSFET make this regulator
More informationFeatures. Micrel, Inc Fortune Drive San Jose, CA USA tel + 1 (408) fax + 1 (408)
MIC5400 Dual, 8-Output, 14-Bit LED Video Display Driver General Description The MIC5400 consists of 2 banks of 8 LED driver outputs, each output capable of sinking up to 30mA. Each bank is intended to
More information