UNIT 1 QUESTIONS WITH ANSWERS

Size: px
Start display at page:

Download "UNIT 1 QUESTIONS WITH ANSWERS"

Transcription

1 UNIT 1 QUESTIONS WITH ANSWERS 1. Define modulation? Modulation is a process by which some characteristics of high frequency carrier signal is varied in accordance with the instantaneous value of the modulating signal. 2. What are the types of analog modulation? Amplitude modulation. Angle Modulation 1. Frequency modulation 2. Phase modulation 3. Define depth of modulation. It is defined as the ratio between message amplitude to that of carrier amplitude m=vm/vc 4. What are the degrees of modulation? Under modulation. (m<1) Critical modulation (m=1) Over modulation (m>1) 5. Define Amplitude Modulation It is the process by which the amplitude of the carrier wave is changed in accordance with the instantaneous value of the message signal. 6. Define modulation index for AM It is defined as the ratio of the maximum modulating voltage to the maximum carrier voltage. It is also called as Depth of modulation. m = Vm / Vc 7. What is the relation between total power and carrier power? 2 m Pt 1 2 P c

2 Pt : Total power Pc : Carrier power m : Modulation index 8. What is the need for modulation? Ease of transmission Multiplexing Reduced noise Narrow bandwidth Frequency assignment Reduce the equipments limitations. 9. A 400W carrier is modulated to a depth of 75 %. Calculate the total power in the modulated wave Solution: Pc = 400 W m = 0.75 Pt=? Pt = Pc ( 1 + m 2 /2 ) Pt=512.5 W Pt = 400 ( /2) 10. What is the relation between total power and carrier power? I t =I c (1+m 2 /2) ½ 11. What is the bandwidth of AM? Bandwidth =2fm 12. Define demodulation. Demodulation or detection is the process by which modulating voltage is recovered from the modulated signal. It is the reverse process of modulation. 13. A transmitter supplies 8 kw to the antenna when modulated. Determine the total power radiated when modulated to 30%. Solution: m =0.3; Pc =8 kw Pt =Pc (1+m 2 /2) =8.36 kw 14. Define frequency modulation. Frequency modulation is defined as the process by which the frequency of the carrier wave is varied in accordance with the modulating signal

3 15. Define modulation index of frequency modulation. It is defined as the ratio of maximum frequency deviation to the modulating frequency m = f / f m 16. Define phase modulation. Phase modulation is defined as the process of changing the phase of the carrier signal in accordance with the instantaneous amplitude of the message signal 17. Define phase deviation. The maximum phase deviation of the total angle from the carrier angle is called phase deviation. 18. Define frequency Deviation. The maximum departure of the instantaneous frequency from the carrier frequency is called frequency deviation. 19. Differentiate between narrow band and wide band FM signal. WBFM NBFM 1. Modulation index is greater than one. 2. Frequency deviation=75 KHz 3. Modulating frequency range from 30 Hz to 15 KHz. 4. Bandwidth 15 times NBFM. 5. Noise is more suppressed. 6. Use: Entertainment and broadcasting. 1. Modulation index is less than one 2. Frequency deviation=5khz 3. Modulating frequency=3khz. 4. Bandwidth = 2 FM. 5. Less suppressing of noise. 6. Use: Mobile communication. 20. What are the disadvantages of FM system? 1. A much wider channel is required by FM. 2. FM transmitting and receiving equipments tend to be more complex and hence it is expensive 21. What are the disadvantages of conventional (or) double side band full carrier system? In conventional AM,carrier power constitutes two thirds or more of the total transmotted power.this is a major drawback because the carrier contains no information ;the sidebands contain the information. 22. Define Single sideband suppressed carrier AM.

4 AM Single sideband suppressed carrier is a form of amplitude modulation in which the carrier is totally suppressed and one of the sidebands removed. 23. Define AM Vestigial sideband. AM vestigial sideband is a form of amplitude modulation in which the carrier and one complete sideband are transmitted,but only part of the second sideband is transmitted. 24. What are the advantages of single sideband transmission? The advantages of SSBSC are 1.Power conservation: Normally,with single side band transmission,only one sideband is transmitted and the carrier is suppressed. So less power is required to produce essentially the same quality signal. 2.Bandwidth conservation: Single sideband transmission requires half as much bandwidth as conventional AM double side band transmission. 3.Noise reduction: Because a single side band system utilizes half as much bandwidth as conventional AM,the thermal noise power is reduced to half that of a double side band system. 25. What are the disadvantages of single side band transmission? 1. Complex receivers: Single side band systems require more complex and expensive receivers than conventional AM transmission. 2. Tuning Difficulties: Single side band receivers require more complex and precise tuning than conventional AM receivers. 2 marks Questions 1. How FM wave can be converted to PM wave? 2. How PM wave can be converted to FM wave? 3. What are the types of Frequency Modulation? 4. List the properties of the Bessel function. 5. State the Carson s rule. 6. Why is FM superior to AM in performance? Detailed questions 1. Expression for AM & its Power and Efficiency calculation AM Definition Power relation in AM Current relation in AM Efficiency 2.Explain the AM generation with the waveforms AM definition Generation wave forms AM equations 3. Explain the power distribution for an AM wave with power spectrum diagram. AM power relation Power spectrum Power efficiency

5 4. Explain the AM current calculation. AM current relation Spectrum 5. Explain the voltage distribution for an Am wave AM voltage equations Modulation index Voltage spectrum 6. Explain the frequency analysis of angle modulated waves using Bessel identity. Modulation by a single frequency sinusoid Bessel functions Derivation Graph Frequency analysis 7. Explain the bandwidth requirements of angle modulated waves in detail. Bandwidth relation to modulation indices Carson s rule Efficiency

UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers)

UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers) UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers) 1. Define modulation? Modulation is a process by which some characteristics of high frequency carrier Signal is varied in accordance with the

More information

(b) What are the differences between FM and PM? (c) What are the differences between NBFM and WBFM? [9+4+3]

(b) What are the differences between FM and PM? (c) What are the differences between NBFM and WBFM? [9+4+3] Code No: RR220401 Set No. 1 1. (a) The antenna current of an AM Broadcast transmitter is 10A, if modulated to a depth of 50% by an audio sine wave. It increases to 12A as a result of simultaneous modulation

More information

Angle Modulated Systems

Angle Modulated Systems Angle Modulated Systems Angle of carrier signal is changed in accordance with instantaneous amplitude of modulating signal. Two types Frequency Modulation (FM) Phase Modulation (PM) Use Commercial radio

More information

Outline. Communications Engineering 1

Outline. Communications Engineering 1 Outline Introduction Signal, random variable, random process and spectra Analog modulation Analog to digital conversion Digital transmission through baseband channels Signal space representation Optimal

More information

Amplitude Modulated Systems

Amplitude Modulated Systems Amplitude Modulated Systems Communication is process of establishing connection between two points for information exchange. Channel refers to medium through which message travels e.g. wires, links, or

More information

CHAPTER 2! AMPLITUDE MODULATION (AM)

CHAPTER 2! AMPLITUDE MODULATION (AM) CHAPTER 2 AMPLITUDE MODULATION (AM) Topics 2-1 : AM Concepts 2-2 : Modulation Index and Percentage of Modulation 2-3 : Sidebands and the Frequency Domain 2-4 : Single-Sideband Modulation 2-5 : AM Power

More information

15.Calculate the local oscillator frequency if incoming frequency is F1 and translated carrier frequency

15.Calculate the local oscillator frequency if incoming frequency is F1 and translated carrier frequency DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING SUBJECT NAME:COMMUNICATION THEORY YEAR/SEM: II/IV SUBJECT CODE: EC 6402 UNIT I:l (AMPLITUDE MODULATION) PART A 1. Compute the bandwidth of the AMP

More information

B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering)

B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering) Code: 13A04404 R13 B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering) Time: 3 hours Max. Marks: 70 PART A

More information

UNIT-2 Angle Modulation System

UNIT-2 Angle Modulation System UNIT-2 Angle Modulation System Introduction There are three parameters of a carrier that may carry information: Amplitude Frequency Phase Frequency Modulation Power in an FM signal does not vary with modulation

More information

Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world

Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Pearson Education Limited Edinburgh Gate Harlow Essex CM20 2JE England and Associated Companies throughout the world Visit us on the World Wide Web at: www.pearsoned.co.uk Pearson Education Limited 2014

More information

Lecture 6. Angle Modulation and Demodulation

Lecture 6. Angle Modulation and Demodulation Lecture 6 and Demodulation Agenda Introduction to and Demodulation Frequency and Phase Modulation Angle Demodulation FM Applications Introduction The other two parameters (frequency and phase) of the carrier

More information

EE470 Electronic Communication Theory Exam II

EE470 Electronic Communication Theory Exam II EE470 Electronic Communication Theory Exam II Open text, closed notes. For partial credit, you must show all formulas in symbolic form and you must work neatly!!! Date: November 6, 2013 Name: 1. [16%]

More information

Chapter 3. Amplitude Modulation Fundamentals

Chapter 3. Amplitude Modulation Fundamentals Chapter 3 Amplitude Modulation Fundamentals Topics Covered 3-1: AM Concepts 3-2: Modulation Index and Percentage of Modulation 3-3: Sidebands and the Frequency Domain 3-4: AM Power 3-5: Single-Sideband

More information

Amplitude Modulation Chapter 2. Modulation process

Amplitude Modulation Chapter 2. Modulation process Question 1 Modulation process Modulation is the process of translation the baseband message signal to bandpass (modulated carrier) signal at frequencies that are very high compared to the baseband frequencies.

More information

Signals and Systems Lecture 9 Communication Systems Frequency-Division Multiplexing and Frequency Modulation (FM)

Signals and Systems Lecture 9 Communication Systems Frequency-Division Multiplexing and Frequency Modulation (FM) Signals and Systems Lecture 9 Communication Systems Frequency-Division Multiplexing and Frequency Modulation (FM) April 11, 2008 Today s Topics 1. Frequency-division multiplexing 2. Frequency modulation

More information

Code No: R Set No. 1

Code No: R Set No. 1 Code No: R05220405 Set No. 1 II B.Tech II Semester Regular Examinations, Apr/May 2007 ANALOG COMMUNICATIONS ( Common to Electronics & Communication Engineering and Electronics & Telematics) Time: 3 hours

More information

UNIT I FUNDAMENTALS OF ANALOG COMMUNICATION Introduction In the Microbroadcasting services, a reliable radio communication system is of vital importance. The swiftly moving operations of modern communities

More information

Elements of Communication System Channel Fig: 1: Block Diagram of Communication System Terminology in Communication System

Elements of Communication System Channel Fig: 1: Block Diagram of Communication System Terminology in Communication System Content:- Fundamentals of Communication Engineering : Elements of a Communication System, Need of modulation, electromagnetic spectrum and typical applications, Unit V (Communication terminologies in communication

More information

SAMPLE. UEENEEH046B Solve fundamental problems in electronic communications systems. Learner Workbook. UEE07 Electrotechnology Training Package

SAMPLE. UEENEEH046B Solve fundamental problems in electronic communications systems. Learner Workbook. UEE07 Electrotechnology Training Package UEE07 Electrotechnology Training Package UEENEEH046B Solve fundamental problems in electronic communications systems Learner Workbook Version 1 Training and Education Support Industry Skills Unit Meadowbank

More information

Technician License Course Chapter 2. Lesson Plan Module 3 Modulation and Bandwidth

Technician License Course Chapter 2. Lesson Plan Module 3 Modulation and Bandwidth Technician License Course Chapter 2 Lesson Plan Module 3 Modulation and Bandwidth The Basic Radio Station What Happens During Radio Communication? Transmitting (sending a signal): Information (voice, data,

More information

Amplitude Modulation. Ahmad Bilal

Amplitude Modulation. Ahmad Bilal Amplitude Modulation Ahmad Bilal 5-2 ANALOG AND DIGITAL Analog-to-analog conversion is the representation of analog information by an analog signal. Topics discussed in this section: Amplitude Modulation

More information

Internal Examination I Answer Key DEPARTMENT OF CSE & IT. Semester: III Max.Marks: 100

Internal Examination I Answer Key DEPARTMENT OF CSE & IT. Semester: III Max.Marks: 100 NH 67, Karur Trichy Highways, Puliyur C.F, 639 114 Karur District Internal Examination I Answer Key DEPARTMENT OF CSE & IT Branch & Section: II CSE & IT Date & Time: 06.08.15 & 3 Hours Semester: III Max.Marks:

More information

ECE513 RF Design for Wireless

ECE513 RF Design for Wireless 1 ECE513 RF Design for Wireless MODULE 1 RF Systems LECTURE 1 Modulation Techniques Chapter 1, Sections 1.1 1.3 Professor Michael Steer http://www4.ncsu.edu/~mbs 2 Module 1: RF Systems Amplifiers, Mixers

More information

AM Limitations. Amplitude Modulation II. DSB-SC Modulation. AM Modifications

AM Limitations. Amplitude Modulation II. DSB-SC Modulation. AM Modifications Lecture 6: Amplitude Modulation II EE 3770: Communication Systems AM Limitations AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Lecture 6 Amplitude Modulation II Amplitude modulation is

More information

Amplitude Modulation II

Amplitude Modulation II Lecture 6: Amplitude Modulation II EE 3770: Communication Systems Lecture 6 Amplitude Modulation II AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Mojtaba Vaezi 6-1 Contents

More information

Part-I. Experiment 6:-Angle Modulation

Part-I. Experiment 6:-Angle Modulation Part-I Experiment 6:-Angle Modulation 1. Introduction 1.1 Objective This experiment deals with the basic performance of Angle Modulation - Phase Modulation (PM) and Frequency Modulation (FM). The student

More information

AM and FM MODULATION Lecture 5&6

AM and FM MODULATION Lecture 5&6 AM and FM MODULATION Lecture 5&6 Ir. Muhamad Asvial, MEng., PhD Center for Information and Communication Engineering Research Electrical Engineering Department University of Indonesia Kampus UI Depok,

More information

Part A: Question & Answers UNIT I AMPLITUDE MODULATION

Part A: Question & Answers UNIT I AMPLITUDE MODULATION PANDIAN SARASWATHI YADAV ENGINEERING COLLEGE DEPARTMENT OF ELECTRONICS & COMMUNICATON ENGG. Branch: ECE EC6402 COMMUNICATION THEORY Semester: IV Part A: Question & Answers UNIT I AMPLITUDE MODULATION 1.

More information

EC2252: COMMUNICATION THEORY SEM / YEAR: II year DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

EC2252: COMMUNICATION THEORY SEM / YEAR: II year DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING EC2252: COMMUNICATION THEORY SEM / YEAR: II year DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK SUBJECT CODE : EC2252 SEM / YEAR : II year SUBJECT NAME : COMMUNICATION THEORY UNIT

More information

4.1 REPRESENTATION OF FM AND PM SIGNALS An angle-modulated signal generally can be written as

4.1 REPRESENTATION OF FM AND PM SIGNALS An angle-modulated signal generally can be written as 1 In frequency-modulation (FM) systems, the frequency of the carrier f c is changed by the message signal; in phase modulation (PM) systems, the phase of the carrier is changed according to the variations

More information

Angle Modulation, II. Lecture topics. FM bandwidth and Carson s rule. Spectral analysis of FM. Narrowband FM Modulation. Wideband FM Modulation

Angle Modulation, II. Lecture topics. FM bandwidth and Carson s rule. Spectral analysis of FM. Narrowband FM Modulation. Wideband FM Modulation Angle Modulation, II Lecture topics FM bandwidth and Carson s rule Spectral analysis of FM Narrowband FM Modulation Wideband FM Modulation Bandwidth of Angle-Modulated Waves Angle modulation is nonlinear

More information

S.R.M. Institute of Science & Technology School of Electronics & Communication Engineering

S.R.M. Institute of Science & Technology School of Electronics & Communication Engineering S.R.M. Institute of Science & Technology School of Electronics & Communication Engineering QUESTION BANK Subject Code : EC314 Subject Name : Communication Engineering Year & Sem : III Year, 6th Sem (EEE)

More information

two computers. 2- Providing a channel between them for transmitting and receiving the signals through it.

two computers. 2- Providing a channel between them for transmitting and receiving the signals through it. 1. Introduction: Communication is the process of transmitting the messages that carrying information, where the two computers can be communicated with each other if the two conditions are available: 1-

More information

EXAMINATION FOR THE DEGREE OF B.E. Semester 1 June COMMUNICATIONS IV (ELEC ENG 4035)

EXAMINATION FOR THE DEGREE OF B.E. Semester 1 June COMMUNICATIONS IV (ELEC ENG 4035) EXAMINATION FOR THE DEGREE OF B.E. Semester 1 June 2007 101902 COMMUNICATIONS IV (ELEC ENG 4035) Official Reading Time: Writing Time: Total Duration: 10 mins 120 mins 130 mins Instructions: This is a closed

More information

SUBJECT CODE: EC 1291 SUBJECT NAME: ANALOG AND DIGITAL COMMUNICATION

SUBJECT CODE: EC 1291 SUBJECT NAME: ANALOG AND DIGITAL COMMUNICATION SUBJECT CODE: EC 1291 SUBJECT NAME: ANALOG AND DIGITAL COMMUNICATION Prepared by, G.SOFIA (L/ECE) 1. Define Amplitude Modulation. It is the process by which the amplitude of the carrier wave is changed

More information

AM, PM and FM mo m dula l ti t o i n

AM, PM and FM mo m dula l ti t o i n AM, PM and FM modulation What is amplitude modulation In order that a radio signal can carry audio or other information for broadcasting or for two way radio communication, it must be modulated or changed

More information

END-OF-YEAR EXAMINATIONS ELEC321 Communication Systems (D2) Tuesday, 22 November 2005, 9:20 a.m. Three hours plus 10 minutes reading time.

END-OF-YEAR EXAMINATIONS ELEC321 Communication Systems (D2) Tuesday, 22 November 2005, 9:20 a.m. Three hours plus 10 minutes reading time. END-OF-YEAR EXAMINATIONS 2005 Unit: Day and Time: Time Allowed: ELEC321 Communication Systems (D2) Tuesday, 22 November 2005, 9:20 a.m. Three hours plus 10 minutes reading time. Total Number of Questions:

More information

Communications IB Paper 6 Handout 2: Analogue Modulation

Communications IB Paper 6 Handout 2: Analogue Modulation Communications IB Paper 6 Handout 2: Analogue Modulation Jossy Sayir Signal Processing and Communications Lab Department of Engineering University of Cambridge jossy.sayir@eng.cam.ac.uk Lent Term c Jossy

More information

Technician License Course Chapter 2. Lesson Plan Module 2 Radio Signals and Waves

Technician License Course Chapter 2. Lesson Plan Module 2 Radio Signals and Waves Technician License Course Chapter 2 Lesson Plan Module 2 Radio Signals and Waves The Basic Radio Station What Happens During Radio Communication? Transmitting (sending a signal): Information (voice, data,

More information

Modulations Analog Modulations Amplitude modulation (AM) Linear modulation Frequency modulation (FM) Phase modulation (PM) cos Angle modulation FM PM Digital Modulations ASK FSK PSK MSK MFSK QAM PAM Etc.

More information

S.R.M Institute of Science and Technology (Deemed University) Department of Electronics & Communication Engineering

S.R.M Institute of Science and Technology (Deemed University) Department of Electronics & Communication Engineering S.R.M Institute of Science and Technology (Deemed University) Department of Electronics & Communication Engineering QUESTION BANK Subject Code : EC211 Subject Name : Communication Engineering Year & Sem

More information

UNIT I AMPLITUDE MODULATION

UNIT I AMPLITUDE MODULATION UNIT I AMPLITUDE MODULATION Prepared by: S.NANDHINI, Assistant Professor, Dept. of ECE, Sri Venkateswara College of Engineering, Sriperumbudur, Tamilnadu. CONTENTS Introduction to communication systems

More information

ENSC327 Communications Systems 14: Multiplexing. School of Engineering Science Simon Fraser University

ENSC327 Communications Systems 14: Multiplexing. School of Engineering Science Simon Fraser University ENSC327 Communications Systems 14: Multiplexing School of Engineering Science Simon Fraser University 1 Outline Required background (Recall various modulation schemes) Different Multiplexing strategies:

More information

Speech, music, images, and video are examples of analog signals. Each of these signals is characterized by its bandwidth, dynamic range, and the

Speech, music, images, and video are examples of analog signals. Each of these signals is characterized by its bandwidth, dynamic range, and the Speech, music, images, and video are examples of analog signals. Each of these signals is characterized by its bandwidth, dynamic range, and the nature of the signal. For instance, in the case of audio

More information

Modulation is the process of impressing a low-frequency information signal (baseband signal) onto a higher frequency carrier signal

Modulation is the process of impressing a low-frequency information signal (baseband signal) onto a higher frequency carrier signal Modulation is the process of impressing a low-frequency information signal (baseband signal) onto a higher frequency carrier signal Modulation is a process of mixing a signal with a sinusoid to produce

More information

Chapter-15. Communication systems -1 mark Questions

Chapter-15. Communication systems -1 mark Questions Chapter-15 Communication systems -1 mark Questions 1) What are the three main units of a Communication System? 2) What is meant by Bandwidth of transmission? 3) What is a transducer? Give an example. 4)

More information

EE390 Final Exam Fall Term 2002 Friday, December 13, 2002

EE390 Final Exam Fall Term 2002 Friday, December 13, 2002 Name Page 1 of 11 EE390 Final Exam Fall Term 2002 Friday, December 13, 2002 Notes 1. This is a 2 hour exam, starting at 9:00 am and ending at 11:00 am. The exam is worth a total of 50 marks, broken down

More information

1B Paper 6: Communications Handout 2: Analogue Modulation

1B Paper 6: Communications Handout 2: Analogue Modulation 1B Paper 6: Communications Handout : Analogue Modulation Ramji Venkataramanan Signal Processing and Communications Lab Department of Engineering ramji.v@eng.cam.ac.uk Lent Term 16 1 / 3 Modulation Modulation

More information

Master Degree in Electronic Engineering

Master Degree in Electronic Engineering Master Degree in Electronic Engineering Analog and telecommunication electronic course (ATLCE-01NWM) Miniproject: Baseband signal transmission techniques Name: LI. XINRUI E-mail: s219989@studenti.polito.it

More information

Keywords Internet, LabVIEW, Smart Classroom-cum-Laboratory, Teaching and Learning process of communication.

Keywords Internet, LabVIEW, Smart Classroom-cum-Laboratory, Teaching and Learning process of communication. Volume 4, Issue 10, October 2014 ISSN: 2277 128X International Journal of Advanced Research in Computer Science and Software Engineering Research Paper Available online at: www.ijarcsse.com Smart Classroom-cum-Laboratory

More information

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY CS6304- ANALOG AND DIGITAL COMMUNICATION BE-CSE/IT SEMESTER III REGULATION 2013 Faculty

DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY CS6304- ANALOG AND DIGITAL COMMUNICATION BE-CSE/IT SEMESTER III REGULATION 2013 Faculty DHANALAKSHMI SRINIVASAN COLLEGE OF ENGINEERING AND TECHNOLOGY CS6304- ANALOG AND DIGITAL COMMUNICATION BE-CSE/IT SEMESTER III REGULATION 2013 Faculty Name: S.Kalpana, AP/ECE QUESTION BANK UNIT I ANALOG

More information

Data Conversion Circuits & Modulation Techniques. Subhasish Chandra Assistant Professor Department of Physics Institute of Forensic Science, Nagpur

Data Conversion Circuits & Modulation Techniques. Subhasish Chandra Assistant Professor Department of Physics Institute of Forensic Science, Nagpur Data Conversion Circuits & Modulation Techniques Subhasish Chandra Assistant Professor Department of Physics Institute of Forensic Science, Nagpur Data Conversion Circuits 2 Digital systems are being used

More information

PRINCIPLES OF COMMUNICATION SYSTEMS. Lecture 1- Introduction Elements, Modulation, Demodulation, Frequency Spectrum

PRINCIPLES OF COMMUNICATION SYSTEMS. Lecture 1- Introduction Elements, Modulation, Demodulation, Frequency Spectrum PRINCIPLES OF COMMUNICATION SYSTEMS Lecture 1- Introduction Elements, Modulation, Demodulation, Frequency Spectrum Topic covered Introduction to subject Elements of Communication system Modulation General

More information

Question 15.1: Which of the following frequencies will be suitable for beyond-the-horizon communication using sky waves? (a) 10 khz (b) 10 MHz (c) 1 GHz (d) 1000 GHz (b) : 10 MHz For beyond-the-horizon

More information

Chapter 3. Question Mar No

Chapter 3. Question Mar No Chapter 3 Sr Question Mar No k. 1 Write any two drawbacks of TRF radio receiver 1. Instability due to oscillatory nature of RF amplifier.. Variation in bandwidth over tuning range. 3. Insufficient selectivity

More information

Introduction to Amplitude Modulation

Introduction to Amplitude Modulation 1 Introduction to Amplitude Modulation Introduction to project management. Problem definition. Design principles and practices. Implementation techniques including circuit design, software design, solid

More information

VALLIAMMAI ENGINEERING COLLEGE

VALLIAMMAI ENGINEERING COLLEGE VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203. DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING QUESTION BANK SUBJECT : EC6402 COMMUNICATION THEORY SEM / YEAR: IV / II year B.E.

More information

ELEC3242 Communications Engineering Laboratory Amplitude Modulation (AM)

ELEC3242 Communications Engineering Laboratory Amplitude Modulation (AM) ELEC3242 Communications Engineering Laboratory 1 ---- Amplitude Modulation (AM) 1. Objectives 1.1 Through this the laboratory experiment, you will investigate demodulation of an amplitude modulated (AM)

More information

Experiment One: Generating Frequency Modulation (FM) Using Voltage Controlled Oscillator (VCO)

Experiment One: Generating Frequency Modulation (FM) Using Voltage Controlled Oscillator (VCO) Experiment One: Generating Frequency Modulation (FM) Using Voltage Controlled Oscillator (VCO) Modified from original TIMS Manual experiment by Mr. Faisel Tubbal. Objectives 1) Learn about VCO and how

More information

University of Toronto Electrical & Computer Engineering ECE 316, Winter 2015 Thursday, February 12, Test #1

University of Toronto Electrical & Computer Engineering ECE 316, Winter 2015 Thursday, February 12, Test #1 Name: Student No.: University of Toronto Electrical & Computer Engineering ECE 36, Winter 205 Thursday, February 2, 205 Test # Professor Dimitrios Hatzinakos Professor Deepa Kundur Duration: 50 minutes

More information

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING 2013 REGULATION 2MARKS UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers)

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING 2013 REGULATION 2MARKS UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers) DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING 2013 REGULATION 2MARKS UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers) 1. Define modulation? Modulation is a process by which some characteristics

More information

Amplitude Modulation, II

Amplitude Modulation, II Amplitude Modulation, II Single sideband modulation (SSB) Vestigial sideband modulation (VSB) VSB spectrum Modulator and demodulator NTSC TV signsals Quadrature modulation Spectral efficiency Modulator

More information

Analog Communication.

Analog Communication. Analog Communication Vishnu N V Tele is Greek for at a distance, and Communicare is latin for to make common. Telecommunication is the process of long distance communications. Early telecommunications

More information

S.E. (Electronics/Electronics and Telecommunication Engg.) (Second Semester) EXAMINATION, 2014 COMMUNICATION THEORY (2008 PATTERN)

S.E. (Electronics/Electronics and Telecommunication Engg.) (Second Semester) EXAMINATION, 2014 COMMUNICATION THEORY (2008 PATTERN) Total No. of Questions 12] [Total No. of Printed Pages 7 Seat No. [4657]-49 S.E. (Electronics/Electronics and Telecommunication Engg.) (Second Semester) EXAMINATION, 2014 COMMUNICATION THEORY (2008 PATTERN)

More information

Modulation Methods Frequency Modulation

Modulation Methods Frequency Modulation Modulation Methods Frequency Modulation William Sheets K2MQJ Rudolf F. Graf KA2CWL The use of frequency modulation (called FM) is another method of adding intelligence to a carrier signal. While simple

More information

CME312- LAB Manual DSB-SC Modulation and Demodulation Experiment 6. Experiment 6. Experiment. DSB-SC Modulation and Demodulation

CME312- LAB Manual DSB-SC Modulation and Demodulation Experiment 6. Experiment 6. Experiment. DSB-SC Modulation and Demodulation Experiment 6 Experiment DSB-SC Modulation and Demodulation Objectives : By the end of this experiment, the student should be able to: 1. Demonstrate the modulation and demodulation process of DSB-SC. 2.

More information

Measurement Procedure & Test Equipment Used

Measurement Procedure & Test Equipment Used Measurement Procedure & Test Equipment Used Except where otherwise stated, all measurements are made following the Electronic Industries Association (EIA) Minimum Standard for Portable/Personal Land Mobile

More information

Charan Langton, Editor

Charan Langton, Editor Charan Langton, Editor SIGNAL PROCESSING & SIMULATION NEWSLETTER Baseband, Passband Signals and Amplitude Modulation The most salient feature of information signals is that they are generally low frequency.

More information

Frequency Modulation KEEE343 Communication Theory Lecture #15, April 28, Prof. Young-Chai Ko

Frequency Modulation KEEE343 Communication Theory Lecture #15, April 28, Prof. Young-Chai Ko Frequency Modulation KEEE343 Communication Theory Lecture #15, April 28, 2011 Prof. Young-Chai Ko koyc@korea.ac.kr Summary Angle Modulation Properties of Angle Modulation Narrowband Frequency Modulation

More information

COMM 601: Modulation I

COMM 601: Modulation I Prof. Ahmed El-Mahdy, Communications Department The German University in Cairo Text Books [1] Couch, Digital and Analog Communication Systems, 7 th edition, Prentice Hall, 2007. [2] Simon Haykin, Communication

More information

PROPOSED SCHEME OF COURSE WORK

PROPOSED SCHEME OF COURSE WORK PROPOSED SCHEME OF COURSE WORK Course Details: Course Title : COMMUNICATION SYSTEMS Course Code : 13EC1145 L T P C : 4 1 0 3 Program: : B.Tech. Specialization: : Information Technology Semester : V Prerequisites

More information

Lab Assignment #3 Analog Modulation (An Introduction to RF Signal, Noise and Distortion Measurements in the Frequency Domain)

Lab Assignment #3 Analog Modulation (An Introduction to RF Signal, Noise and Distortion Measurements in the Frequency Domain) Lab Assignment #3 Analog Modulation (An Introduction to RF Signal, Noise and Distortion Measurements in the Frequency Domain) By: Timothy X Brown, Olivera Notaros, Nishant Jadhav TLEN 5320 Wireless Systems

More information

Angle Modulation KEEE343 Communication Theory Lecture #12, April 14, Prof. Young-Chai Ko

Angle Modulation KEEE343 Communication Theory Lecture #12, April 14, Prof. Young-Chai Ko Angle Modulation KEEE343 Communication Theory Lecture #12, April 14, 2011 Prof. Young-Chai Ko koyc@korea.ac.kr Summary Frequency Division Multiplexing (FDM) Angle Modulation Frequency-Division Multiplexing

More information

Universitas Sumatera Utara

Universitas Sumatera Utara Amplitude Shift Keying & Frequency Shift Keying Aim: To generate and demodulate an amplitude shift keyed (ASK) signal and a binary FSK signal. Intro to Generation of ASK Amplitude shift keying - ASK -

More information

ELE636 Communication Systems

ELE636 Communication Systems ELE636 Communication Systems Chapter 5 : Angle (Exponential) Modulation 1 Phase-locked Loop (PLL) The PLL can be used to track the phase and the frequency of the carrier component of an incoming signal.

More information

CS311: Data Communication. Transmission of Analog Signal - I

CS311: Data Communication. Transmission of Analog Signal - I CS311: Data Communication Transmission of Analog Signal - I by Dr. Manas Khatua Assistant Professor Dept. of CSE IIT Jodhpur E-mail: manaskhatua@iitj.ac.in Web: http://home.iitj.ac.in/~manaskhatua http://manaskhatua.github.io/

More information

DEPARTMENT OF COMPUTER GCE@Bodi_ SCIENCE GCE@Bodi_ AND ENIGNEERING GCE@Bodi_ GCE@Bodi_ GCE@Bodi_ Analog and Digital Communication GCE@Bodi_ DEPARTMENT OF CsE Subject Name: Analog and Digital Communication

More information

Frequency Modulation

Frequency Modulation Frequency Modulation transferred to the microwave carrier by means of FM. Instead of being done in one step, this modulation usually takes place at an intermediate frequency. signal is then frequency multiplied

More information

Amplitude Modulation Fundamentals

Amplitude Modulation Fundamentals 3 chapter Amplitude Modulation Fundamentals In the modulation process, the baseband voice, video, or digital signal modifies another, higher-frequency signal called the carrier, which is usually a sine

More information

EE-4022 Experiment 3 Frequency Modulation (FM)

EE-4022 Experiment 3 Frequency Modulation (FM) EE-4022 MILWAUKEE SCHOOL OF ENGINEERING 2015 Page 3-1 Student Objectives: EE-4022 Experiment 3 Frequency Modulation (FM) In this experiment the student will use laboratory modules including a Voltage-Controlled

More information

28. What is meant by repetition rate of the AM envelope? (ADC,AU-2010) 29. Describe the upper and lower sidebands. (ADC, AU-2010) 30.

28. What is meant by repetition rate of the AM envelope? (ADC,AU-2010) 29. Describe the upper and lower sidebands. (ADC, AU-2010) 30. Institute of Road and Transport Technology, Erode Department of Electronics and Communication Engineering Class/Sem: 2 nd Year Information Technology-3rd Semester Subject: Principles of Communication (IT)

More information

ELEC3242 Communications Engineering Laboratory Frequency Shift Keying (FSK)

ELEC3242 Communications Engineering Laboratory Frequency Shift Keying (FSK) ELEC3242 Communications Engineering Laboratory 1 ---- Frequency Shift Keying (FSK) 1) Frequency Shift Keying Objectives To appreciate the principle of frequency shift keying and its relationship to analogue

More information

Using The Bessel Null Method To Verify FM Deviation Measurements By Dave Engelder, Agilent Technologies, Inc.

Using The Bessel Null Method To Verify FM Deviation Measurements By Dave Engelder, Agilent Technologies, Inc. Using The Bessel Null Method To Verify FM Deviation Measurements By Dave Engelder, Agilent Technologies, Inc. Frequency modulation (FM) has been used in various radio frequency (RF) transmitters and receivers

More information

DT Filters 2/19. Atousa Hajshirmohammadi, SFU

DT Filters 2/19. Atousa Hajshirmohammadi, SFU 1/19 ENSC380 Lecture 23 Objectives: Signals and Systems Fourier Analysis: Discrete Time Filters Analog Communication Systems Double Sideband, Sub-pressed Carrier Modulation (DSBSC) Amplitude Modulation

More information

Software Defined Radio Waveforms implementation on GNU Radio

Software Defined Radio Waveforms implementation on GNU Radio 2018 3 rd International Electrical Engineering Conference (IEEC 2018) Feb, 2018 at IEP Centre, Karachi, Pakistan Software Defined Radio Waveforms implementation on GNU Radio Atif Javed, Abdul Samad, Faisal

More information

COMMUNICATION SYSTEMS-II (In continuation with Part-I)

COMMUNICATION SYSTEMS-II (In continuation with Part-I) MODULATING A SIGNAL COMMUNICATION SYSTEMS-II (In continuation with Part-I) TRANSMITTING SIGNALS : In order to transmit the original low frequency baseband message efficiently over long distances, the signal

More information

Communication Engineering Prof. Surendra Prasad Department of Electrical Engineering Indian Institute of Technology, Delhi

Communication Engineering Prof. Surendra Prasad Department of Electrical Engineering Indian Institute of Technology, Delhi Communication Engineering Prof. Surendra Prasad Department of Electrical Engineering Indian Institute of Technology, Delhi Lecture - 16 Angle Modulation (Contd.) We will continue our discussion on Angle

More information

Analogue & Digital Telecommunications

Analogue & Digital Telecommunications Analogue & Digital Telecommunications 53-004 Tuned Circuits & Filters Amplifiers & Oscillators Description Modulation & Coding This modern training system provides a learning platform that involves the

More information

Chapter 3: Analog Modulation Cengage Learning Engineering. All Rights Reserved.

Chapter 3: Analog Modulation Cengage Learning Engineering. All Rights Reserved. Contemporary Communication Systems using MATLAB Chapter 3: Analog Modulation 2013 Cengage Learning Engineering. All Rights Reserved. 3.1 Preview In this chapter we study analog modulation & demodulation,

More information

Communication Channels

Communication Channels Communication Channels wires (PCB trace or conductor on IC) optical fiber (attenuation 4dB/km) broadcast TV (50 kw transmit) voice telephone line (under -9 dbm or 110 µw) walkie-talkie: 500 mw, 467 MHz

More information

5.1. Amplitude Modula1on

5.1. Amplitude Modula1on 5.1. Amplitude Modula1on The complex envelope of an AM signal is given by g(t) = A c [1+ m(t)] where the constant A c has been included to specify the power level and m(t) is the modula

More information

Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad

Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad EXPERIMENT #5 DSB-SC AND SSB MODULATOR Theory The amplitude-modulated signal is

More information

ENSC327 Communications Systems 14: Multiplexing. Jie Liang School of Engineering Science Simon Fraser University

ENSC327 Communications Systems 14: Multiplexing. Jie Liang School of Engineering Science Simon Fraser University ENSC327 Communications Systems 14: Multiplexing Jie Liang School of Engineering Science Simon Fraser University 1 Outline Multiplexing allows signals to share channels Many different strategies are possible

More information

VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203. DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING QUESTION BANK EC6402 COMMUNICATION THEORY III YEAR / VI SEMESTER ACADEMIC YEAR 2015-16(EVEN)

More information

Problems from the 3 rd edition

Problems from the 3 rd edition (2.1-1) Find the energies of the signals: a) sin t, 0 t π b) sin t, 0 t π c) 2 sin t, 0 t π d) sin (t-2π), 2π t 4π Problems from the 3 rd edition Comment on the effect on energy of sign change, time shifting

More information

EE-4022 Experiment 2 Amplitude Modulation (AM)

EE-4022 Experiment 2 Amplitude Modulation (AM) EE-4022 MILWAUKEE SCHOOL OF ENGINEERING 2015 Page 2-1 Student objectives: EE-4022 Experiment 2 Amplitude Modulation (AM) In this experiment the student will use laboratory modules to implement operations

More information

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY An Overview of Modulation Techniques: chapter 3.1 3.3.1 2 Introduction (3.1) Analog Modulation Amplitude Modulation Phase and

More information

ANALOG COMMUNICATIONS. BY P.Swetha, Assistant Professor (Units 1, 2 & 5) K.D.K.Ajay, Assistant Professor (Units 3 & 4)

ANALOG COMMUNICATIONS. BY P.Swetha, Assistant Professor (Units 1, 2 & 5) K.D.K.Ajay, Assistant Professor (Units 3 & 4) ANALOG COMMUNICATIONS BY P.Swetha, Assistant Professor (Units 1, 2 & 5) K.D.K.Ajay, Assistant Professor (Units 3 & 4) (R15A0409) ANALOG COMMUNICATIONS Course Objectives: Objective of the course is to:

More information

COMMUNICATION SYSTEMS -I

COMMUNICATION SYSTEMS -I COMMUNICATION SYSTEMS -I Communication : It is the act of transmission of information. ELEMENTS OF A COMMUNICATION SYSTEM TRANSMITTER MEDIUM/CHANNEL: The physical medium that connects transmitter to receiver

More information

Let us consider the following block diagram of a feedback amplifier with input voltage feedback fraction,, be positive i.e. in phase.

Let us consider the following block diagram of a feedback amplifier with input voltage feedback fraction,, be positive i.e. in phase. P a g e 2 Contents 1) Oscillators 3 Sinusoidal Oscillators Phase Shift Oscillators 4 Wien Bridge Oscillators 4 Square Wave Generator 5 Triangular Wave Generator Using Square Wave Generator 6 Using Comparator

More information