Product Specification File
|
|
- Arline Sutton
- 5 years ago
- Views:
Transcription
1 Product Specification File Model Name: NSP-002 Product Name : VDSL Universal Splitter *Netsys reserves the right to change specifications without prior notice. 1
2 Revision Realized By Modification Description Date Last Pages A01 Johnny Datasheet updated JUN A02 Johnny Datasheet updated MAR A03 Johnny Datasheet updated JUN
3 Table of contents 1 Preliminary Customer reference documents Standard reference documents 4 4 Features Design requirements Schematic Electrical Performance Mechanical Pin Assignments Environmental conditions Resistibility to over voltages and over currents Climatic conditions 8 7 Reliability conditions Thermal shock Temperature humidity exposure Vibration test 8 8 Note.. 8 3
4 1 Preliminary: The NSP-002 is a splitter module that has been specifically designed to implement the functionality of low pass filter in VDSL over ISDN application. NSP-002 had also included protection circuit to provide additional protection against line overstress which could damage the splitter itself. 2 Customer reference documents: None 3 Standard reference documents: - ETSI TS ETSI TS Features - Comply to K21 - Compact package, includes connectors for ease of installation ma DC Loop Current Capacity 4
5 5 Design Requirement 5.1 Schematic ADSL a ADSL b Line a Line b Low Pass Filter Phone a Phone b 5.2 Electrical Performance General conditions General conditions Conditions Values Splitter bandwidth DC-94KHz Nominal impedance ISDN ZISDN 150 ohms Nominal impedance LINE ZLINE 135 ohms Modem impedance 100 ohms POTS impedance 270 ohms, 600 ohms ZVDSL-I 0Hz ~ 4KHz 43nF 43nF VDSL band impedance 150KHz ~ 30MHz 100Ω Max. operating voltage to ground 250VDC DC Loop current <80mA 5
6 5.2.2 Electrical Requirement Electrical Requirement DC requirements Conditions Values TIP to RING 100VDC > 5 MΩ TIP to RING ISDN port shorted <12.5Ω DC feeding current < 60 ma ISDN Pass band loss requirements Insertion loss w/ ZVDSL-I (ZISDN)/1 khz to 60 khz <1.2 db (ZISDN)/60kHz to 80 khz <2.0 db Return loss w/ ZVDSL-I (ZISDN)/1 khz to 60 khz (ZISDN)/60kHz to 80 khz <16 db <14 db Delay distortion 300 Hz to 80 khz < 20 usec. POTS Pass band loss requirements Insertion loss (w/ and w/o ZVDSL-I) 1000Hz <1.0 db Insertion loss (w/ and w/o ZVDSL-I) 11.94Hz 17KHz(Load 200ohms) <3.0 db 600Hz-1.6KHz (Ref 1KHz) <+/-0.5 db Attenuation distortion 300Hz-3.4KHz (Ref 1KHz) <±1.0 db (w/ and w/o ZVDSL-I) 200 Hz<f<4 khz <±1.0 db 6
7 Stop band requirements Splitter parameter Range Value 138 khz to 150 khz >55dB Isolation requirements 150 khz to 1.1MHz >65dB 1.1MHz to 30MHz >55dB Port VDSL ISDN LINE ZVDSL-I ZISDN ZLINE VDSL Insertion Loss Longitudinal conversion loss LCL 5.3 Mechanical 120 khz to 170 khz <3 db 170 khz to 30MHz <1dB ZISDN ZVDSL-I ZLINE ZPOTS 3.4KHz to 30kHz > 40 db KHz to 1104kHz > 50 db KHz to 30MHz > 30 db Pin Assignments Unless otherwise specified, all tolerances are as following XXXX.XX +/- 5 mm XXX.XX +/- 2 mm XX.XX +/- 1mm X.XX +/ mm 0.XX +/ mm Connector Function Style Tip Ring J1 Line RJ11 Pin3 Pin4 J2 Modem RJ11 Pin3 Pin4 J3 Phone RJ11 Pin3 Pin4 7
8 6 Environmental conditions: 6.1 Resistibility to over voltages and over currents: Comply with the resistibility requirements per ITU-T Recommendation K.21 electrical safety requirements 6.2 Climatic conditions: 6.2a. Operating temperature: -20 C to +60 C 6.2b. Storage and transportation: Low ambient temperature - 40 C High ambient temperature +80 C 6.2c. Operation humidity: 0 to 95% (non-condensing) 7 Reliability conditions: 7.1 Thermal shock: Temperature from -20 C to +85 C for 5 cycles 7.2. Temperature humidity exposure: +50 C / 95 RH, 96hrs 7.3. Vibration test: Random vibration / Overall: 1.15 g rms Freq. (Hz): PSD (g2 / Hz): Test Axis / Time: Top / 30 mins Bottom / 10 mins X axis / 10 mins Y axis / 10 mins 8 Note: 8
Specification CPE MASTER SPLITTER ADSL ASYMMETRIC DIGITAL SUBSCRIBER LINE. Figure 1
108-15298 Product 06-mar-03, Rev. O Specification CPE MASTER SPLITTER ADSL ASYMMETRIC DIGITAL SUBSCRIBER LINE 1 - INTRODUCTION Figure 1 This document describes an integrated POTS/ADSL splitter function
More informationPAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
More informationHC2F100-SN CLIPS AUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS. Datasheet
AUTOMOTIVE CURRENT TRANSDUCER Datasheet 071113/1 LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice. Page 1/ 6 www.lem.com Introduction
More informationAUTOMOTIVE CURRENT SENSOR HC6H500-S. Datasheet
AUTOMOTIVE CURRENT SENSOR HC6H500-S Datasheet Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low
More informationCal-Chip Electronics, Inc.
Cal-Chip Electronics, Inc. Feature: These new SSL Series is designed for the smallest possible size, low cost and high performance. It's high energy storage and very low DC resistance offer higher saturated
More informationSpecification PTC 281: Telecom Requirements for Customer-connected
Specification PTC 281: 2008 Telecom Requirements for Customer-connected ADSL2+ Line Filters Access Standards Telecom New Zealand Limited Wellington New Zealand July 2008 CONTENTS Page Table of Diagrams
More informationAUTOMOTIVE CURRENT TRANSDUCER HC6F600-S
AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and
More informationResults You Can Count On
20 khz to 300 MHz Noise Generator for Realistic Gfast Testing Up to 24 Independent Noise Ports Gfast technology promises to bring a wealth of new opportunities to Service Providers as well as manufacturers
More informationAUTOMOTIVE CURRENT TRANSDUCER HC6F700-S
AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and
More informationLoopBack Relay. GLB363 Series. With Built-in AC Bypass Capacitors / DC LoopBack Relay
GLB363 Series With Built-in AC Bypass Capacitors / DC SERIES DESIGNATION GLB363 RELAY TYPE, Sensitive Coil, Surface Mount Ground Shield and Stub pins with AC Bypass Capacitors or No capacitor DESCRIPTION
More informationAUTOMOTIVE CURRENT SENSOR HC6H300-S
AUTOMOTIVE CURRENT SENSOR HC6H300-S Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive
More informationCopper Loop Frequency Management Plan
Copper Loop Frequency Management Plan Issue 8 Revision1.1 Issue 8 Revision 1.1 Keywords Access Network; Spectral Management; Document Details Version Control Issue Revision level Date Summary 1 0 8 th
More informationETSI TR V1.1.1 ( )
TR 101 953-1-2 V1.1.1 (2003-05) Technical Re Access network xdsl transmission filters; Part 1: ADSL splitters for European deployment; Sub-part 2: Testing methods for High Pass part of ADSL/POTS splitters
More informationAUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S
AUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S 18198151434 Page 1/ 5 HC6H1000-S Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in
More informationVI TELEFILTER Resonator specification TFR 868D 1/5
VI TELEFILTER Resonator specification TFR 868D 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance * for input: 50Ω for output: 50Ω Characteristics Remark:
More informationData Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
More informationAccelerometer Interface Unit AIU-6
Accelerometer Interface Unit AIU-6 Available with two, three or six channels, the AIU (Accelerometer Interface Unit) is to be used with IEPE (Integrated Electronics Piezo-Electric) accelerometers and harness
More informationAUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS
AUTOMOTIVE CURRENT TRANSDUCER HCF-SN CLIPS Introduction The HCF CLIPS Family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with galvanic
More informationMX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
More informationOX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
More informationLoopBack Relay. LB363 Series. With Built-in AC Bypass Capacitors. LoopBack Relay, Sensitive Coil, thru-hole with AC Bypass Capacitors
LB363 Series With Built-in AC Bypass Capacitors SERIES DESIGNATION LB363 RELAY TYPE, Sensitive Coil, thru-hole with AC Bypass Capacitors DESCRIPTION The LoopBack Series relay combines two DPDT electromechanical
More informationVS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
More informationSwitched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DR 200-S
AUTOMOTIE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAHDR 2-S Introduction The HAHDR family is for the electronic measurement of DC, AC or pulsed currents in high power automotive applications with galvanic
More informationVibration Measure System
Product Summary McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK Suite 115 Bostick Building 9801 West Kincey Avenue Huntersville NC 28078 USA 2014 Revision Date: 05 Nov 2010 Page 1 of
More informationOptiva 18 GHz Unamplified Microwave (MW) Transport System
The EMCORE Optiva Microwave Fiber Optic Transport System is a family of SNMP managed fiber optic transmitter and receivers that provide high-performance 0.05-18 Hz transport within the Optiva modular platform.
More informationHigh Performance Current Transducer IT 200-S ULTRASTAB = A. ε L
High Performance Current Transducer IT 200-S ULTRASTAB For the electronic measurement of currents: DC, AC, pulsed..., with galvanic isolation between the primary circuit and the secondary circuit. I PM
More informationETSI TR V1.1.1 ( )
TR 101 953-2-2 V1.1.1 (2004-07) Technical Re Access network xdsl transmission filters; Part 2: VDSL splitters for European deployment; Sub-part 2: Specification of Testing methods for high pass part of
More informationRequirements and Test Methods for Very-High-Bit-Rate Digital Subscriber Line (VDSL) Terminal Equipment
VDSL(E) Issue 1 (Provisional) January 2003 Terminal Attachment Program Requirements and Test Methods for Very-High-Bit-Rate Digital Subscriber Line (VDSL) Terminal Equipment Aussi disponible en français
More informationOX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
More informationVectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
More informationVectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
More informationOptiva Un-Amplified MW Transport 40 GHz System
The EMCORE Optiva Microwave Fiber Optic Transport System is a family of SNMP managed fiber optic transmitter and receivers that provide high-performance 0.05-40 Hz transport within the Optiva modular platform.
More informationSingle-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationM70LL Laser Distance Sensor
M7LL Laser Distance Sensor for automated manufacturing with Ethernet interface to connect with PLC The analog sensors of series M7LL use a PSD for their receiver optics. This assures a position measurement
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationVC-4/4A, VC-8/8A, VC-16
Data Sheet Megaplex-4, Megaplex-2100/2104 VC-4/4A, VC-8/8A, VC-16 E&M, FXS or FXO options Caller ID A-law or µ-law companding Optional inband signaling with A-law encoded channels PCM (64 kbps) and ADPCM
More informationSPECIFICATION. DVB-C / Worldwide NIM Tuner
1.Feature * All-in-one full NIM function with compact size, optimal solution for cost reduction and shortening product development lead-time. * ITU J.83 Annex A/C and DVB-C (ETSI EN 300 429) compliant
More informationVectron International Filter specification TFS /5
Vectron International Filter specification TFS 1795 1/5 Measurement condition Ambient temperature: 2 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The maximum
More informationFeatures and Technical Specifications
Features and Technical Specifications PRODU C T SUM M AR Y The HL9404 is a signal splitter and combiner that offers industry-best amplitude and phase match over a bandwidth of 500 khz to 40 GHz (-3 db).
More informationRakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
More informationMini Compact Outdoor GaN SSPAs in C-, X-, and Ku-Bands
FEATURES 80 Ku-Band Mini Compact Outdoor SSPA Description The Teledyne Paradise Datacom Mini Compact Outdoor Solid State Power Amplifier (SSPA) is built for etreme environmental conditions and high reliability
More informationOX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
More informationQUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s 2M805 Series Connector
QUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation 40-60 Delaware
More informationSPECIFICATION PTC 273:2012 REQUIREMENTS FOR CONNECTION OF ADSL CPE TO THE TELECOM NETWORK
SPECIFICATION PTC 273:2012 REQUIREMENTS FOR CONNECTION OF ADSL CPE TO THE TELECOM NETWORK Telecom New Zealand November 26 2012 November 26 2012 2/18 PTC273 CONTENTS Telecom Disclaimer 4 1. INTRODUCTION
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 605-S ULTRASTAB I PN = 600 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationQUARTER-BRICK SERIES Single Output Performance Products
Quarter-Brick Series 100 A DC-DC QUARTER-BRICK SERIES Single Output Performance Products High efficiency topology High output current Low profile, 0.300 inch (7.62 mm) height Unprecedented useable output
More informationVectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
More informationSURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT DC-4 GHz
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT DC-4 GHz SERIES RELAY TYPE GRF7 GRF73 Repeatable, RF relay Sensitive, repeatable, RF relay DESCRIPTION The ultraminiature GRF7 and GRF73 relays
More informationJD723A/JD724B/JD726A Cable and Antenna Analyzers
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS JD723A/JD724B/JD726A Cable and Antenna Analyzers Key Features Portable and lightweight handheld instrument. Built in wireless frequency bands as well as the
More informationPart VI: Requirements for ISDN Terminal Equipment
Issue 9 November 2004 Spectrum Management and Telecommunications Policy Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing
More informationBilag 6. TDC technical requirements for approval of equipment intended for connection to TDC unboundled copper.
Bilag 6. TDC technical requirements for approval of equipment intended for connection to TDC unboundled copper. Dette bilag udgør bilag 6 til det mellem parterne tiltrådte Produkttillæg for Rå kobber/delt
More informationModem 9600 baud 500FSD11 EDS500 series - FSK modems
Data sheet Modem 9600 baud 500FSD11 EDS500 series - FSK modems Voice frequency telegraphy device (VFT) Transparent up to 9600 baud Can be connected to 23WT24 DIN rail mounted 24...60 V DC supply voltage
More informationLow Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH3DR 800-S03/SP2
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH3DR-S03 family is a tri-phase transducer for DC, AC, or pulsed currents measurement in high power and low voltage automotive applications.
More informationVectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
More informationPerformance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
More informationKeysight Technologies 87405C 100 MHz to 18 GHz Preamplifier. Technical Overview
Keysight Technologies 8745C 1 MHz to 18 GHz Preamplifier Technical Overview 2 Keysight 8745C 1 MHz to 18 GHz Preamplifier Technical Overview Introduction The Keysight Technologies, Inc. 8745C preamplifier
More informationDC MHZ PXI Differential Instrumentation Amplifier
DC - 100 MHZ PXI Differential Instrumentation Amplifier Differential 100 V Common Mode Input DC - 100 MHz Bandwidth AC/DC Coupling Programmable Attenuation/Gain/ Offset 9 nv/ Input Noise 50 Ω Output Impedance
More informationOutput Current Input Current Load Regulation
PB01S/D series 1W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 1% SIP Package with Industry Standard Pinout Package Dimension: 5V&12V Models: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 15V&24V
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationVI TELEFILTER Filter specification TFS 248F 1/5
VI TELEFILTER Filter specification TFS 248F 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 200 Ω Characteristics Remark: The reference
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-SB ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features ± 10 V voltage output
More informationFeatures. Applications
DATASHEET IDTHS221P10 Description The IDTHS221P10 is a high-performance hybrid switch device, combined with hybrid low distortion audio and USB 2.0 high speed data (480 Mbps) signal switches, and analog
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationVectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
More informationFeatures and Technical Specifications
Features and Technical Specifications PRODU C T SUM M AR Y The HL9402 is a signal splitter and combiner that offers industry-best amplitude and phase match over a bandwidth of 500 khz to 20 GHz (-3 db).
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationCMC 14 Common Mode Chokes Series
7 Electrical Data ID Code Inductance Value at C (-/+%) Less than % performance variations versus temperature (- C / + C) Minimum impedance attenuation : Ω from khz to MHz Compact SMD package (x pins) Applied
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationFED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED30-48 S 05 - N HC Series Name Input Output Output Remote Control Assembly Option
More informationCopper Lines and High Speed
Copper Lines and High Speed Application Note 52 Line quality is no coincidence Testing transmission lines for ADSL Test Solutions with the PSM-137 Selective Level Test Set Contents Testing transmission
More informationOX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
More informationTISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 2512/ 3921/ 5931
Product specification November 23, 2017 V.4 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 2512/ 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-S ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationThin-Film Cascadable Amplifier 5 to 1000 MHz. Technical Data. UTO/UTC 1005 Series
Thin-Film Cascadable Amplifier 5 to 1000 MHz Technical Data UTO/UTC 1005 Series Features Frequency Range: 5 to 1000 MHz High Dynamic Range High Output Power: +21.0 m (Typ) Noise Figure: 5.0 (Typ) Temperature
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More informationVI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
More informationSwitched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
More informationProduct Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
More informationAUTOMOTIVE CURRENT TRANSDUCER HAH1DR 300-S
AUTOMOTIVE CURRENT TRANSDUCER Introduction The HAH1DR family is for the electronic measurement of DC, AC or pulsed currents in high power automotive applications with galvanic isolation between the primary
More informationCMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
More informationDielectric Antenna Elements
The ACT family of Dielectric Antenna offers a range of antenna for for the frequencies of 1575.42MHz and 2338 MHz. Other custom frequencies may be available on request Sizes range from 12mm square to 25mm
More informationICAM. Electronics & Software. Industrial Charge Amplifier for Applications in Manufacturing. Type 5073A...
Electronics & Software ICAM Type 5073A... Industrial Charge Amplifier for Applications in Manufacturing The ICAM charge amplifier (Industrial Charge Amplifier Manufacturing) converts the piezoelectric
More information200 WATT TH SERIES DC/DC CONVERTERS
Features 4:1 Input voltage range High power density Small size 2.4 x 2.28 x 0.65 Efficiency up to 90 Excellent thermal performance with metal case Pulse-by-pulse current limiting Over-temperature protection
More information15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
More informationA C T Advanced Communication Tester
A C T 6 0 0 0 Advanced Communication Tester SINE SIGNAL & NOISE GENERATOR - SELECTIVE LEVEL METER CROSS TALK METER - SPECTRUM & NETWORK ANALYZER LONGITUDINAL BALANCE & RETURN LOSS METER MICROINTERRUPTION
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 3921/ 5931
Product specification January 16, 2017 V.2 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt resistor
More informationActuator LA12 PRODUCT DATA SHEET
PRODUCT DATA SHEET Actuator LA12 Thanks to its small size and outstanding performance, the actuator LA12 provides a practical and cost-effective alternative to small-scale traditional hydraulic and pneumatic
More informationMODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series
MODEL: 0VS-0 Hybrid IC Isolation Amplifiers 0 Series ISOLATION AMPLIFIER (-port isolation) Functions & Features Being used for printed wiring board installation High-linearity Low power consumption Isolating
More informationVectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
More informationRef: HLSR 10-SM, HLSR 16-SM, HLSR 20-SM, HLSR 32-SM, HLSR 40-SM, HLSR 50-SM
Current Transducer HLSR-SM series N = 1... 5 A Ref: HLSR 1-SM, HLSR 16-SM, HLSR 2-SM, HLSR 32-SM, HLSR 4-SM, HLSR 5-SM For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation
More informationDC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output
THN 20WI Series Application Note DC/DC Converter 9 to 36Vdc and 18 to 75Vdc input voltage, 20 Watt Output Power; 3.3 to 15Vdc Single Output and ±12Vdc to ±15Vdc Dual Output Pending Applications Wireless
More informationVectron International Filter specification TFS 869K 1/5
Vectron International Filter specification TFS 869K 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationDraft Copper Loop Frequency Management Plan
NM-2564 Issue: 6 Revision 1 Page 1 of 34 Class: [Open] Document No: NM-2564 Draft Copper Loop Frequency Management Plan Issue 6 Revision 1 Keywords Access Network; Spectral Management; NM-2564 Issue: 6
More information