Smart Field Communicator SET URV ITEM. Can be ordered separately see specification 34-ST-03-55

Transcription

1 ST 3000 Smart Transmitter Series 900 Flange Mounted Liquid Level Models STF924 0 to 400 inh 2 O 0 to 1000 mbar STF932 0 to 100 psi 0 to 7 bar STF92F 0 to 400 inh 2 O 0 to 1000 mbar STF93F 0 to 100 psi 0 to 7 bar 34-ST /98 Specification and Model Selection Guide Function Honeywell s ST 3000 Series 900 Flange Mounted Liquid Level Transmitters bring proven smart technology to a wide spectrum of liquid level measurement applications with varying process interface requirements. They measure head pressure caused by changes in liquid level and transmit an output signal proportional to the measured variable in either an analog 4 to 20 milliampere format or in a digital DE protocol format for direct digital integration with our TDC 3000 X control system. An optional electronics module is available for the Series 900 that provides HART ¹ Protocol compatibility. A future protocol option will let you use these transmitters in FOUNDATION Fieldbus² networks. Smart Field Communicator ST 3000 Flange Mounted Liquid Level Transmitter Models: STF924 STF932 In the standard transmitter you easily select the analog or digital transmission format through the Smart Field Communicator (SFC ) which is the common hand-held operator interface for our DE-based Smartline Transmitters. All configuration, operation, and communications functions are under the control of the ST 3000 Smart Transmitter s microprocessor and are accessible through the SFC. TAG No. SFC WORKING... Can be ordered separately see specification 34-ST ID CONF LRV 0% MENU ITEM DAMP UNITS URV 100% SET OUT- PUT NEXT STAT PREV SPAN NUM/ ALPHA SHIFT COR- RECT +/- CLR ENTER (NO) (YES) ST 3000 Differential Pressure Transmitter with Flange on One Side Models: STF92F STF93F ¹ HART is a registered trademark of the Hart Communication Foundation. ² FOUNDATION Fieldbus is a trademark of the Fieldbus Foundation. Figure 1 Series 900 Flange Mounted Liquid Level Transmitters feature proven smart technology and come in flush diaphragm, and extended diaphragm models as well as pseudo flange types. See Specification 34-ST for Sanitary Flange Mount. Industrial Automation and Control, N. Black Canyon Highway, Phoenix, AZ Printed in U.S.A. Copyright 1998 Honeywell Inc.

2 Page 2 Features Description Choice of flush or extended diaphragm to match varying tank interface requirements. Direct digital integration with TDC 3000 X system provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies. Unique piezoresistive sensor automatically compensates input for temperature and static pressure. Added smart features include configuring lower and upper range values, simulating accurate analog output, and selecting preprogrammed engineering units for display. Smart transmitter capabilities with local or remote interfacing means significant manpower efficiency improvements in commissioning, start-up, and ongoing maintenance functions. Models STF924 and STF932 are available with a flush or extended diaphragm with a flange that is always attached to the high pressure side of the body. All performance specifications for these models hold for ±100% of the upper range value so you can use them for either gaseous or liquid reference leg (open or closed tank) applications without regard to flange position. With a flush diaphragm model, the diaphragm is mounted flush with the gasket surface of a 3-inch, Class 150 or 300 ANSI flange. With an extended diaphragm model, the diaphragm is attached to a 2.86 inch (72.64 mm) dia stainless steel extension tube having standard extensions of 2, 4, or 6 inches (50, 101, or 152 mm). You may increase the effective dia of the extension tube to 3.75 inches(92.25 mm) by adding an optional sleeve. The extension tube is mounted to the gasket surface of either a 3 or 4-inch, Class 150 or 300 ANSI flange. Note that models STF924 and STF932 are also available in a 3-A Sanitary Flange Mount version designed for mounting on a sanitary tank spud with a 2 or 6-inch (50 or 152 mm) extension using a Ladish 4-inch Tri-Clamp. See Sanitary Mount Specification 34-ST for details. Models STF92F and STF93F are standard differential pressure transmitters with one of the normal process heads replaced by a 3- inch, Class 150 ANSI flange. For vented tank or gaseous reference leg applications, the flange is mounted on the high pressure side. For tanks with a liquid reference leg, the flange is mounted on the low pressure side. Either version is field convertible to the opposite side. The ST 3000 transmitter can replace any 4 to 20 milliampere output transmitter in use today, and operates over a standard two-wire system. The measuring means is a piezoresistive sensor which actually contains three sensors in one. It contains a pressure sensor, a temperature sensor, and a static pressure sensor. Microprocessorbased electronics provide higher span-turndown ratio, improved temperature and pressure compensation, and improved accuracy. Like other Smartline Transmitters, the ST 3000 features two-way communication between the operator and the transmitter through our SFC. You can connect the SFC anywhere that you can access the transmitter signal lines, and it provides the capabilities of transmitter adjustments and diagnostics from remote locations, such as the control room. The transmitter s body and electronics housing resist shock, vibration, corrosion, and moisture. The electronics housing contains a compartment for the single-board electronics, which is isolated from an integral junction box. The singleboard electronics is replaceable and interchangeable with any other ST 3000 Series 900 or Series 100e model transmitter.

3 Page 3 Specifications Operating Conditions All Models Para Reference Condition (at zero static) Rated Condition Operative Limits Transportation and Storage C F C F C F C F Ambient Temperature 25 ±1 77 ±2-40 to to to to to to 257 Meter Body Temperature 25 ±1 77 ±2-40 to 110* -40 to 230* -40 to to to to 257 Process Interface Temperature STF924, STF932 only 25 ±1 77 ±2-40 to 110** -40 to 230** -40 to to to to 257 Humidity %RH 10 to 55 0 to to to 100 Overpressure (Flange Rating) ANSI Class 150 psi bar ANSI Class 300 psi bar Vacuum Region - Minimum Pressure mmhg absolute inh2o absolute atmospheric atmospheric (short term ) 1 (short term ) Supply Voltage, Current, and Load Resistance Voltage Range: 10.8 to 42.4 Vdc at terminals Current Range: 3.0 to 21.8 ma Load Resistance: 0 to 1440 ohms (as shown in Figure 2) * For model STF932 with CTFE fill fluid, the rating is 15 to 110 C (5 to 230 F); for models STF92F and STF93F with CTFE fill fluid, the rating is 15 to 70 C (5 to 158 F). ** For model STF932 with CTFE fill fluid, the rating is 15 to 110 C (5 to 230 F). For CTFE fill fluid, the maximum temperature rating is 150 C (300 F). Short term equals 2 hours at 70 C (158 F)

4 Page = Operating Area Loop Resistance (ohms) NOTE: A minimum of 250 0hms of loop resistance is necessary to support communications. Loop resistance equals barrier resistance plus wire resistance plus receiver resistance. Also 45 volt operation is permitted if not an intrinsically safe installation Operating Voltage (Vdc) Figure 2 Supply voltage and loop resistance chart

5 Performance Under Rated Conditions* - Model STF924 (0 to 400 inh 2 O/1000 mbar) Para Upper Range Limit Minimum Span inh2o mbar inh2o mbar Description 400 (39.2 F/4 C is standard reference temperature for inh2o range.) Turndown Ratio 16 to 1 Zero Elevation and Suppression Accuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) Accuracy includes residual error after averaging successive readings. Zero Temperature Effect per 28 C (50 F) Combined Zero and Span Temperature Effect per 28 C (50 F) Zero Static Pressure Effect per 1000 psi (70 bar) Combined Zero and Span Static Pressure Effect per 1000 psi (70 bar) 34-ST Page 5 No limit except minimum span within ±100% URL. Specifications valid from 100% to + 100% URL. In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (25 inh2o), accuracy equals: 25 inh2o ± or ± mbar In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (25 inh2o), accuracy equals: 25 inh2o ± or ± mbar In Analog Mode: ±0.2625% of span. For URV below reference point (), effect equals: ± or ± mbar In Digital Mode: ±0.25% of span. For span below reference point (), effect equals: ±0.25 or ± mbar In Analog Mode: ±0.50% of span. For URV below reference point (), effect equals: ± or ± mbar In Digital Mode: ±0.475% of span. For span below reference point (), effect equals: ± or ± mbar ±0.2125% of span. For URV below reference point (), effect equals: ± or ± mbar ±0.40% of span. For URV below reference point (), effect equals: ± or ± mbar *Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm.

6 Page 6 Performance Under Rated Conditions* - Model STF932 (0 to 100 psi/7 bar) Para Upper Range Limit Minimum Span psi bar psi bar Turndown Ratio 20 to 1 Zero Elevation and Suppression Accuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) Accuracy includes residual error after averaging successive readings. Zero Temperature Effect per 28 C (50 F) Combined Zero and Span Temperature Effect per 28 C (50 F) Zero Static Pressure Effect per 1000 psi (70 bar) Span Static Pressure Effect per 1000 psi (70 bar) Description No limit except minimum span within ±100% URL. Specifications valid from 100% to + 100% URL. In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (20 psi), accuracy equals: ± psi span psi or ± bar In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (20 psi), accuracy equals: ± psi span psi or ± bar In Analog Mode: ±0.2625% of span. ± span psi or ± bar In Digital Mode: ±0.25% of span. ±0.25 span psi or ± bar In Analog Mode: ±0.50% of span. ± span psi or ± bar In Digital Mode: ±0.475% of span. ± span psi or ± bar ±0.2125% of span. ± span psi or ± bar ±0.40% of span. ± span psi or ± bar *Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm.

7 Performance Under Rated Conditions* - Model STF92F (0 to 400 inh 2 O/25 mbar) Para Upper Range Limit Minimum Span inh2o mbar inh2o mbar Description 400 (39.2 F/4 C is standard reference temperature for inh2o range.) Turndown Ratio 16 to 1 Zero Elevation and Suppression Accuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) Accuracy includes residual error after averaging successive readings. Zero Temperature Effect per 28 C (50 F) Combined Zero and Span Temperature Effect per 28 C (50 F) Zero Static Pressure Effect per 1000 psi (70 bar) Combined Zero and Span Static Pressure Effect per 1000 psi (70 bar) 5 to +100% URL 34-ST Page 7 In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (25 inh2o), accuracy equals: 25 inh2o ± or ± mbar In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (25 inh2o), accuracy equals: 25 inh2o ± or ± mbar In Analog Mode: ±0.1625% of span. For URV below reference point (), effect equals: ± or ± mbar In Digital Mode: ±0.15% of span. For URV below reference point (), effect equals: ±0.15 or ± mbar In Analog Mode: ±0.25% of span. For URV below reference point (), effect equals: ± or ± mbar In Digital Mode: ±0.225% of span. For URV below reference point (), effect equals: ± or ± mbar ±0.1625% of span. For URV below reference point (), effect equals: ± or ± mbar ±0.30% of span. For URV below reference point (), effect equals: ± or ± mbar *Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm.

8 Page 8 Performance Under Rated Conditions* - Model STF93F (0 to 100 psi/7 bar) Para Upper Range Limit Minimum Span psi bar psi bar Turndown Ratio 20 to 1 Zero Elevation and Suppression Accuracy (Reference Includes combined effects of linearity, hysteresis, and repeatability) Accuracy includes residual error after averaging successive readings. Zero Temperature Effect per 28 C (50 F) Combined Zero and Span Temperature Effect per 28 C (50 F) Zero Static Pressure Effect per 1000 psi (70 bar) Combined Zero and Span Static Pressure Effect per 1000 psi (70 bar) 5 to +100% URL Description In Analog Mode: ±0.10% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (20 psi), accuracy equals: ± psi span psi or ± bar In Digital Mode: ±0.075% of calibrated span or upper range value (URV), whichever is greater, terminal based. For URV below reference point (20 psi), accuracy equals: ± psi span psi or ± bar In Analog Mode: ±0.1625% of span. ± span psi or ± bar In Digital Mode: ±0.15% of span. ±0.15 span psi or ± bar In Analog Mode: ±0.25% of span. ± span psi or ± bar In Digital Mode: ±0.225% of span. ± span psi or ± bar ±0.1625% of span. ± span psi or ± bar ±0.30% of span. ± span psi or ± bar *Performance specifications are based on reference conditions of 25 C (77 F), zero (0) static pressure, 10 to 55% RH, and 316L Stainless Steel barrier diaphragm.

9 Performance Under Rated Conditions - General for all Models Para Output (two-wire) Supply Voltage Effect Damping Time Constant CE Conformity (Europe) Description 34-ST Page 9 Analog 4 to 20 ma or DE digital communications mode. Optional HART electronics module available % span per volt. Adjustable from 0 to 32 seconds digital damping. 89/336/EEC, Electromagnetic Compatibility (EMC) Directive. Physical and Approval Bodies Para Barrier Diaphragms Material (Wetted) Gasket Ring Material (Wetted) Extension Tube Material (Wetted) Process Head and Adapter Flange Material Sanitary Flange Mount Process Head Gaskets Meter Body Bolting Mounting Flange STF924, STF932 Fill Fluid Electronic Housing Process Connections Wiring Mounting STF92F, STF93F All Models STF924, STF932 STF92F, STF93F 316L SS, Hastelloy C SS, Hastelloy C-276* 316 SS Description 316 SS, Carbon Steel (zinc-plated), Hastelloy C-276* All parts are 316 SS. Teflon is standard. Carbon Steel or 316 SS (NACE) bolts. Flush or Extended Diaphragm: Zinc Chromate plated Carbon Steel, 304 SS, or 316 SS. Sanitary Design: 316 SS 316 SS Silicone oil or CTFE (Chlorotrifluoroethylene) Epoxy-Polyester hybrid paint. Low Copper-Aluminum. Meets NEMA 4X (watertight) and NEMA 7 (explosion proof). Stainless steel optional. Process Head: 1/4-inch NPT; 1/2-inch NPT with adapter, standard option. Flange: 3 or 4-inch Class 150 or 300 ANSI; DN80-PN40 or DN100-PN40 DIN flange. Extended Diaphragm: 2, 4, or 6 inches (50, 101, 152 mm) long. Sanitary Flange Mount: 4-inch sanitary tank spud with Ladish 4-inch Tri-Clamp. See Specification 34-ST inch, Class 150 ANSI flange. Accepts up to 16 AWG (1.5 mm dia). See Figure 3 for typical flange mounting arrangement. Dimensions See Figures 4, 5, and 6 Net Weight STF924, STF932 Flush Model: 26.5 pounds (12 Kg) STF92F, STF93F 15.4 pounds (7 Kg) Approval Bodies Approved as explosion proof and intrinsically safe for use in Class I, Division 1, Groups A, B, C, D locations, and nonincendive for Class I, Division 2 Groups A, B, C, D locations. Approved EEx ia IIC T5 and EEx d IIC T6 per CENELEC standards; and Ex N II T5 per BS Series 900 with HC (HART) Compatibility is self certified for Zone 2, T5, maximum 42V/22 ma. * Flush design only.

10 Page 10 Attention: Dotted area indicates use with closed tank with gas reference leg. B A Maximum Level Variable Head H1 Gas Leg Reference Minimum Level LP SideVented to Atmosphere HP Side Mounted to Tank Figure 3 Typical mounting arrangement for flange mounted liquid level transmitter

11 Page 11 Reference Dimensions: millis inches Plug With Smart Removal Clearance for All Caps Without Without With Analog Optional s "T" /2-inch NPT SQ /4-inch NPT Optional external ground "B" Dia. "D" Dia. 45 Optional Adapter for 1/2-inch NPT "H" Dia Description "T" "D" Flange Dia. Bolt Hole "H"Dia Number Bolt Circle "B" Dia. 3-inch, ANSI Class inch, ANSI Class DIN DN80-PN inch, ANSI Class inch, ANSI Class DIN DN100-PN Figure 4 Approximate mounting dimensions for STF924 and STF932 flush diaphragm type

12 Page 12 Reference Dimensions: millis inches Plug With Smart Removal Clearance for All Caps Without Without With Analog Optional s 1/2-inch NPT 1/4-inch NPT Optional external ground "T" SQ "A" Dia. "B" Dia. "D" Dia. 45 Optional Adapter for 1/2-inch NPT "H" Dia "E" Description "T" "D" Flange Dia. Bolt Hole "H"Dia. Number Bolt Circle "A" Dia. (Optional) "B" Dia. Extension E E 2-inch E 4-inch E 6-inch 3-inch, ANSI Class inch, ANSI Class N/A DIN DN80-PN inch, ANSI Class inch, ANSI Class DIN DN100-PN NOTE: See Specification 34-ST for Sanitary Flange Mount version Figure 5 Approximate mounting dimensions for STF924 and STF932 extended diaphragm type

13 Page 13 Reference Dimensions: millis inches With Smart Removal Clearance for All Caps Without Without With Analog Plug Optional s Optional external ground 1/2-inch NPT Rotational Lock SQ Optional Adapter for 1/2-inch NPT "A" "T" Customer Supplied Flange and Hardware 45 Bolt Circle ID Bolt Holes Flange Dia "B" Dia Description "T" Flange Dia. Bolt Hole/Studs Dia Number Bolt Circle "A" "B" Dia. 3-inch, ANSI Class Figure 6 Approximate mounting dimensions for STF92F and STF93F pseudo flange type

14 Page 14 Reference Dimensions: millis inches With Smart Removal Clearance 45.7 for All Caps Without Without With Analog Plug Optional clamp connects transmitter and tank spud Optional external ground 1/2" NPT Optional s Rotational lock Optional tank spud is welded to tank wall /4" NPT or or Process tank wall Figure 7 Typical mounting dimensions for Flange-Mounted Liquid Level Transmitter with sanitary flange for 4-inch dia tank spud For Reference Only

15 Page 15 Options Ordering Information Mounting Bracket The angle mounting bracket is available in either zinc-plated carbon steel or stainless steel and is suitable for horizontal or vertical mounting on a two inch (50 milli) pipe, as well as wall mounting. An optional flat mounting bracket is also available in carbon steel for two inch (50 milli) pipe mounting. Indicating Meter Two integral options are available. An analog (option ME) is available with a 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display for both analog and digital output and can be configured to display pressure in pre-selected engineering units. * Lightning Protection A terminal block with circuitry that protects the transmitter from transient surges induced by nearby lightning strikes is available. HART Protocol Compatibility (Option HC) An optional electronics module is available for the Series 900 that provides HART Protocol compatibility. Transmitters with the HART Option are compatible with the AMS System. (Contact your AMS Supplier if an upgrade is required.) Configuration of the HART Option transmitter is accomplished using a Universal HART Communicator. For full functionality the communicator must contain the Honeywell Device Description (DD). Contact your nearest Honeywell office or distributor for further information regarding this option. *NOTE: When used in conjunction with the HC Option the Smart Meter will display only 0 to 100%. Tagging (Option TG) Up to 30 characters can be added on the stainless steel nameplate mounted on the transmitter s electronics housing at no extra cost. Note that a separate nameplate on the body contains the serial number and body-related data. A stainless steel wired on tag with additional data of up to 4 lines of 28 characters is also available. The number of characters for tagging includes spaces. Transmitter Configuration (Option TC) The factory can configure the transmitter linear/square root extraction, damping time, LRV, URV and mode (analog/digital) and enter an ID tag of up to eight characters and scratchpad information as specified. Custom Calibration and ID in Memory (Option CC) The factory can calibrate any range within the scope of the transmitter s range and enter an ID tag of up to eight characters in the transmitter s memory. FOUNDATION Fieldbus (Future Option FF) Equips transmitter with FF protocol for use in kbit/s FF networks. See document 34-ST for additional information on ST 3000 Fieldbus transmitters. Specifications are subject to change without notice. (Note that specifications may differ slightly for transmitters manufactured before October 30, 1995.) Contact your nearest Honeywell sales office, or In the U.S.: Honeywell Industrial Automation & Control N. Black Canyon Highway Phoenix, AZ In Canada: The Honeywell Centre 155 Gordon Baker Rd. North York, Ontario M2H 3N In Latin America: Honeywell Inc. 480 Sawgrass Corporate Parkway, Suite 200 Sunrise, FL (954) In Europe: Honeywell PACE 1, Avenue du Bourget B-1140 Brussels, Belgium [32-2] In Asia: Honeywell Asia Pacific Inc. Room Sun Hung Kai Centre No. 30 Harbour Road Wanchai, Hong Kong In the Pacific: Honeywell Limited 5 Thomas Holt Drive North Ryde NSW 2113 Australia (61 2) Or, visit Honeywell on the World Wide Web at:

16 Page 16 Model Selection Guide 34-ST Instructions Select the desired Key Number. The arrow to the right marks the selection available. Make one selection from each table, I and II, using the column below the proper arrow. Select as many Table III options as desired (if no options are desired, specify 00). A dot denotes unrestricted availability. A letter denotes restricted availability. Restrictions follow Table IV. Key Number I II III (Optional) IV - _ - _ -, - XXXX KEY NUMBER Selection Availability Span 0-25 to inh 2 0/ to mbar Compound Characterized STF to psi/ to 0-7 bar Compound Characterized STF to inh 2 0/ to mbar STF92F 0-5 to psi/ to 0-7 bar STF93F TABLE I - METER BODY Vent/Drain Barrier Diaphragm Design Ref. Hd. Valve Diaphragms Plate Extension on Ref. Hd (wetted) (wetted) (wetted) 316 LSS 316 SS A Carbon* Hast C 316 SS W Steel Hast C Hast C B Flush 316 SS 316 LSS 316 SS E 316 SS Hast C 316 SS N/A X Hast C Hast C F Hast C Hast C Hast C Hast C J Materials Carbon* 316 LSS M Extended Steel Hast C N 316 SS 316 SS 316 LSS 316 SS 316 SS R Hast C S Carbon* 316 LSS A Pseudo Steel 316 SS Hast C N/A N/A B Flange 316 SS 316 LSS E Hast C F Sanitary Flange 316 SS 316SS 316 LSS 316 SS 316 SS Z w (3-A) Fill Fluid Silicone _ 1 _ (Meter Body & Flange) CTFE _ 2 _ Reference Head Flange 1/4" NPT High Pressure Side A Process Low Pressure Side C Connection 1/2" NPT (with Adapter) High Pressure Side H t t Low Pressure Side K t * Carbon Steel heads are zinc-plated.

17 Page 17 Model Selection Guide, continued STF9 Availability 24 2F TABLE II - FLANGE ASSEMBLY Selection 32 3F No Selection 0 3" ANSI Class 150 _ 1 _ y 3" ANSI Class 300 _ 2 _ y DN80-PN40 DIN Carbon _ 3 _ y 4" ANSI Class 150 Steel _ 4 _ 4" ANSI Class 300 (non-wetted) _ 5 _ DN100-PN40 DIN _ 6 _ 3" ANSI Class 150 _ A _ y Flange 3" ANSI Class 300 _ B _ y DN80-PN40 DIN 304 SS _ C _ y (ANSI Flanges have 4" ANSI Class 150 _ D _ AARH 4" ANSI Class 300 (non-wetted) _ E _ Surface Finish) DN100-PN40 DIN _ F _ 3" ANSI Class 150 _ H _ y 3" ANSI Class 300 _ J _ y DN80-PN40 DIN 316 SS _ K _ y 4" ANSI Class 150 _ L _ 4" ANSI Class 300 (non-wetted) _ M _ DN100-PN40 DIN _ N _ Pseudo Flange on Standard DP 3" ANSI Class 150 w/vent/drain (wetted) _ R _ 3" ANSI Class 150 w/o Vent/Drain _ P _ 3-A Sanitary Flange for 4" Ladish 316 SS _ S _ w Tri-Clamp (wetted) No Selection 0 w Gasket Ring 316 SS 1 g (wetted) Flush Design Hast C 2 g Extended Design 316 SS 5 v No Selection _ 0 _ Flush _ F _ h Dia Length 2.86 Inches 2 inches _ 1 _ v (for 3" or 4 " spud) 4 inches _ 2 _ v Extension 6 inches _ 3 _ v (wetted) 3.75 Inches 2 inches _ 5 _ v (optional for 4" spud) 4 inches _ 6 _ v 6 inches _ 7 _ v 4 Inch Nominal Sanitary 2 inches _ A _ w (for sanitary spud) 6 inches _ B _ w No Selection 0

18 Page 18 Model Selection Guide, continued STF9 Availability 24 2F TABLE III - OPTIONS Selection 32 3F None 00 Adapter Flange - 1/2" NPT St. Steel S1 c c b Adapter Flange - 1/2" NPT Hastelloy-C T1 c c Modified DIN Process Heads - 316SS DN z z 316 ST.ST. Electronics Housing with M20 Conduit Connections SH m m 1/2" NPT to M20 316SS Conduit Adapter (BASEEFA EEx d IIC) A1 n n b 1/2" NPT to 3/4" NPT 316 SS Conduit Adapter A2 u u Lightning Protection LP Analog Meter (0-100 Even 0-10 Square Root) ME b Smart Meter SM 316SS (NACE) Bols and 304SS (NACE) Retaining Ring for Heads CR Custom Calibration and I.D. in Memory CC Transmitter Configuration TC Write Protection WP Local Zero and Span ZS b HART Protocol Compatible Electronics HC x x Stainless Steel Customer Wired-On Tag TG (4 lines, 28 characters per line, customer supplied information) Stainless Steel Customer Wired-On Tag (blank) TB Additional Warranty - 1 year W1 Additional Warranty - 2 years W2 b Additional Warranty - 3 years W3 Additional Warranty - 4 years W4 Clean Transmitter for Oxygen or Chlorine Service with Certificate 0X j j Over-Pressure Leak Test with F3392 Certificate TP Blind DIN SS Flanges Mounted with NACE Bolts B1 d d Calibration Test Report and Certificate of Conformance (F3399) F1 b Certificate of Conformance (F3391) F3 Certificate of Origin (F0195) F5 NACE Certificate (F0198) F7 o o Table III continued next page

19 Page 19 Model Selection Guide, continued STF9 Availability 24 2F TABLE III - OPTIONS (continued) Selection 32 3F Approval Body Approval Type Location or Classification Factory Explosion Proof Class I, Div. 1, Groups A,B,C,D Mutual Dust Ignition Proof Class II, III Div. 1, Groups E,F,G Non-Incendive Class I, Div. 2, Groups A,B,C,D F1D3 Intrinsically Safe Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G Explosion Proof Class I, Div. 1, Groups B,C,D CSA Dust Ignition Proof Class II, III, Div. 1, Groups E,F,G C1C3 Intrinsically Safe Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G Zone 2 Self-Declared Ex II 3 GD T (1) X b (Europe) per 94/9/EC (1) T4 at Tamb. 93 o C, T5 at Tamb. H2D5 (ATEX4) 80 o C, T6 at Tamb. 65 o C SA Intrinsically Safe Ex ia IIC T4 A0CA Non-Incendive Ex n IIC T6 (T4 with SM option) Flame Proof/ EEx d IIC T6 CENELEC CENELEC Intrinsically Safe/ EEx ia IIC T5 E1D9 CENELEC Flame Proof/ EEx d IIC T6 CENELEC Intrinsically Safe/ EEx ia IIC T5 E1D8 f f CENELEC Flame Proof/ EEx d IIC T6 E1D3 CENELEC b No hazardous location approvals 9X Explosion Proof Class I, Div. 1, Groups A,B,C,D Factory Dust Ignition Proof Class II, III Div. 1, Groups E,F,G Mutual Non-Incendive Class I, Div. 2, Groups A,B,C,D 1C Intrinsically Safe Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G Explosion Proof Class I, Div. 1, Groups B,C,D CSA Dust Ignition Proof Class II, III, Div. 1, Groups E,F,G 2J Intrinsically Safe Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G Zone 2 Self-Declared Ex II 3 GD T (1) X (Europe) per 94/9/EC (1) T4 at Tamb. 93 o C, T5 at Tamb. 3N (ATEX4) 80 o C, T6 at Tamb. 65 o C SA Intrinsically Safe Ex ia IIC T4 4H a a (Australia) Non-Incendive Ex n IIC T6 (T4 with SM option) Flame Proof Ex d IIC T6 Flame Proof/ EEx d IIC T6 3A CENELEC LCIE Intrinsically Safe/ EEx ia IIC T5 CENELEC Flame Proof/ EEx d IIC T6 3D CENELEC TABLE IV Factory Identification XXXX

20 Page 20 Model Selection Guide, continued RESTRICTIONS Restriction Available Only With Not Available With Letter Table Selection Table Selection b Select only one option from this group c I H, K d I E _ A, F _ A, R _ A, S _ A, X _ A, E _ C, F _ C III DN f III HC g I A, B, E, F, J, W, X h I M,N,R,S,Z II 5,, 0 j I _ 2 _ m III F1D3, C1C3, ZS n III F1D3, C1C3 o III CR or B1 t Select from Table III S1, T1 u III F1D3, C1C3 v I M, N, R, S w I, II Z - _ S0A _; Z - _ S0B _ x III A0CA, E1D9 y II _ 5 _, _ 6 _, _ 7 _ z I E _ A, F _ A, R _ A, S _ A, X _ A, E _ C, F _ C Note: See 13:ST-27 for Published Specials with pricing. See 13:ST-29 and User s Manual for part numbers. See 13:ST-OE-9 for OMS Order Entry Information including TC, manuals, certificates, drawings and SPINS. See 13:ST-OD-1 for tagging, ID, Transmitter Configuration (TC) and calibration including factory default values. To request a quotation for a non-published "special", fax RFQ to Marketing Applications. Industrial Automation and Control Honeywell Inc North Black Canyon Highway Phoenix, Arizona