Part4 Test & Measurement

Transcription

1 Part4 Test & Measurement

2 PART4. Test & Measurement SG-200A _ 100kHz~200MHzDIGITAL RF SIGNAL GENERATOR FG-1883 _ SWEEP FUNCTION GENERATOR ED-4770 _ COMBO TESTER PSA-6000 _6.2GHzSPECTRUM ANALYZER PSA-3000 _3GHzSPECTRUM ANALYZER RF SYS-3000 _RF SYSTEM DESIGN KIT FC-1300B/FC-1130B _UNIVERSAL COUNTER(3GHz/1.3GHz) PM-3001D _ POWER METER SWR-3002 _SWR METER ED-333T _ 180W 3-MODE TRACKING DC POWER SUPPLY

3 Signal Generator SG-200A 100kHz~200MHz DIGITAL RF SIGNAL GENERATOR Built-in High Performance DSP Processor and Direct Digital Synthesizer(DDS) 0.5ppm High-stability TCXO and Internal Modulation Signal(20 Hz~15 khz : 1 Hz Resolution) Wide Frequency Range : 100 khz~200 MHz Frequency Resolution : 1 Hz Level Flatness : ± 1 db Level Resolution : 0.1 db High Output Power : +13 dbm Low Phase Noise : < -110 dbc(@δf=10 khz) Modulation : FM /AM/PM/FSK/PSK/ASK Digital Frequency Sweep Generator Carrier Frequency» Range : 100kHz to 200MHz» Resolution : 1Hz Reference Frequency» Frequency Range : MHz» Frequency Temp Stability : < 0.5ppm» RT Frequency Stability : < 0.5ppm» Stability vs. Aging : < 0.5ppm/year» Operating Temperature : 0 C~50 C» Ref Out Frequency : MHz Spectral Purity» Harmonics : < -30dBc» Non-harmonics(Spurious) : < -40dBc» Residual FM : < 5Hz(0.3 to 3kHz BW) Typically < 2Hz» Residual AM : < 0.05%» Residual PM : < 0.01Rad(0.3 to 3kHz BW) Typically < 0.001Rad» Phase Noise : <-110 dbc/hz(@δf=10 khz) Level» Range : -130 to +13dBm» Resolution : 0.1dB» Accuracy : < ±1dB(@ -100dBm), < ±2dB(@ <-100dBm)» Characteristic Impedance : 50Ω» VSWR : 1.5 : 9dBm» RF Flatness : ±1dB Modulation Source» Frequency Range : 20Hz to 15kHz Sine ±0.01%» Resolution : 1Hz» Ext Input Impedance : 30kΩ» Ext Input Voltage : 3Vp-p Amplitude Modulation» Frequency Range : 100kHz~200MHz» Level : +7dBm» Operating Modes : Internal, External» Modulation Depth : 0% to 100%» Resolution : 0.1% 120 Part4 Test & Measurement

4 Signal Generator SG-200A 100kHz~200MHz DIGITAL RF SIGNAL GENERATOR Electricals Electonics Embedded» Accuracy < ±(indicated value x 2%), Typically < ±(indicated value x 0.5%), 100kHz~60MHz < ±30%, Typically < ±20%, AF=Internal 1kHz» Distortion < AF=Internal 1kHz, 100kHz~60MHz < AF=Internal 1kHz, 60MHz~200MHz Demod. BW=50Hz~15kHz Frequency Modulation» Operating Modes : Internal, External» Frequency Deviation : 0 to 200kHz» Resolution : 1Hz» Accuracy : < AF=Internal 1kHz» Distortion < 0.05%, Typically < AF=Internal 1kHz Demod. BW=50Hz~15kHz De-emp=50μsec Phase Modulation» Operating Modes : Internal, External» Phase Deviation : 0 rad to 3.14rad» Resolution : 0.01rad» Accuracy : < AF=Internal 1kHz» Distortion < AF=Internal 1kHz Demod. BW=50Hz~15kHz Memory for Device Settings» Storable Settings : 100 FSK Modulation» Operating Mode : External» Frequency Range : 100kHz to 120MHz» FSK Mode : 2 Level FSK» Frequency Shift(F1-F0) : 0 to 10MHz» Resolution : 1Hz» Frequency Flatness : Peak-to-Peak 4dB PSK Modulation» Operating Mode : External» Frequency Range : 100kHz to 120MHz» PSK Mode : 2 Level PSK» Phase Shift(PH1 - PH0) : 0 to 6.28rad» Resolution : 0.01rad GATE(ASK) Modulation» Operating Mode : External» Frequency Range : 100kHz to 120MHz» ON/OFF Ratio : 80dB» Rise/Fall Time : > 55μsec» Input Level : TTL : 1 ON, 0 Off Sweep» Start F/Stop F : 100kHz to 120MHz» Resolution : 1Hz» Type : Linear» Direction : Up or Up_Down Repeat» Step(Delta) Frequency : 1Hz~10MHz» Step Frequency Resolution : 1Hz» Step Duration : ms. FIX» Frequency Flatness : Peak-to-Peak 4 db GENERAL CHARACTERISTICS Temperature Condition» 10 C~35 C Specification» 0 C~40 C Operation AC Power Supply : 90~240 V AC Free Voltage, 50/60Hz Dimension : 435(W) x 110(H) x 390(D)mm Weight : 6.6kg ACCESSORIES AC Power Cord : 1ea BNC Cable : 1ea Operating Manual : 1ea New& Renewable energy IT/ Communication Test& Measurement Intelligent Robot/ Automation Mechatronics Simulation Software Typical Amplitute Flatness Typical Phase Noise Performance 200mHz Phase Noise Pneumatics Hydraulics 121

5 Signal Generator FG-1883 SWEEP FUNCTION GENERATOR Sweep, Symmetry and DC Offset Built-in Digital Frequency Counter Diverse Output Waveforms Frequency Range : 0.02Hz~2MHz(in 7Ranges) Waveform:,,, Ramp, Pulse Distortion( ) : Less than 1%(5Hz~20kHz) Rise/Fall Time( ) : Less than 100ns(Max. Output) Linearity : 99%(to 100kHz) Output Level» Hi : 20Vp-p(10Vp-p into 50Ω)» Lo : 2Vp-p(1Vp-p into 50Ω) Output Impedance : 50Ω±5% DC Offset Control : ±10V(±5V into 50Ω) Symmetry Variable : 20:80~80:20 (0.02Hz~100kHz) VCF Input : 0~-10V Sweep Rate : 0.5Hz~50Hz Sweep Width» 100:1 Frequency Display : 4 Digits(0.001kHz~2000kHz) External Frequency Counter» Range : 0.005kHz~1000kHz» Sensitivity : 100mV» Input Impedance : 1MΩ, 25pF» Max. Input Voltage : 150Vp-p» Accuracy : 0.01% ±1 Count Operating Temp. : 0~45 C, Below 85% R.H. Input Power : AC 220V, 50/60Hz Dimension : 255(W) x 100(H) x 280(D)mm Weight : 2.2kg ACCESSORIES BNC-Clip Cord : 1ea AC Power Cord : 1ea Operating Manual : 1ea 122 Part4 Test & Measurement

6 Multi Function ED-4770 COMBO TESTER Function Generator : 100mHz~10MHz, 4 Digits LED-display, Internal Sweep Function Frequency Counter : 0Hz~100MHz, 8 Digits LED-display DMM : 4½digits, AC ±0.5%/DC ±0.05% Basic Accuracy DC Power Supply : 0~25V 1A Dual Output, 4 Digits LED-display Electricals Electonics Embedded New& Renewable energy IT/ Communication Test& Measurement Intelligent Robot/ Automation Function Generator <10 MHz Function Generator> General Features» 100mHz~10MHz Function Generator» Sine, Triangle, Square Generation Function» DC-offset» Internal Sweep» 4 Digit LED-display Frequency Range : 100mHz~10MHz Waveform : Sine, Square, Triangle wave Sine Wave Distortion» 100mHz~100kHz : 0.5%» 100kHz~500kHz : 1.5%» 500kHz~10MHz : 3% Output Voltage Characteristics» Output Voltage : Max 10Vp-p(50Ω)» Max 20Vp-p(Open)» Impedance : 50Ω ±5% Attenuator» 2 Steps : 20dB ±0.2dB» Variable : 0 to 20dB Square Wave Risetime» typ. 15nS(10 to 90 %) Frequency Accuracy» Up to 10Hz ±(1%+3 Digit)» 10Hz~10MHz ±(10x10E-5+3 Digit) DC Offset Range» Max ±2.5V(50Ω) Internal Sweep» Sweep Speed : 20ms to 5s» Sweep Range 1:100 Amplitude Flatness» 100mHz to 2MHz : Max ±0.5dB Mechatronics Simulation Software Pneumatics Hydraulics 123

7 Multi Function ED-4770 COMBO TESTER Frequency Counter <100 MHz Frequency Counter> General Features» 0 Hz~100 MHz Frequency Counter» Time Interval, Period Measurement» 8 Digit LED-display» 3 Selectable Gate Times Display : 8 digits Frequency Range» 0Hz~100MHz(DC Coupled)» 10Hz~100MHz(AC Coupled) Sensitivity : 60mV(1Hz~100MHz Sine Wave) Input Impedance : 1MΩ(Approx.) Max. Input Voltage : 250V(DC+AC peak) Time Base Stability» Accuracy : ±1ppm» Aging Rate : ±2.5ppm/year Attenuation : x1, x20(switch Selectable) Period» Range : 10000sec to 66.6ns» Resolution : ±1 or 2 LSD Gate Time : Range : 10s, 1s, 0.1s(3steps) Time Interval» LSD : 100ns to 100ps» Resolution : 1 or 2 LSD Digital Multimeter General Features» 4 ½ Digits Digital Multimeter» Beeper Function» AC ±0.5% Basic Accuracy» DC ±0.05% Basic Accuracy Measurement Function» DC : Voltage/Current» AC : Voltage/Current» Resistor Measurement» Beeper Measurement DC Voltage Measurement Range 2V 20v 200v 1000v Resolution 100μV 1mV 10mV 100mV Accuracy ±(0.2%o.v % o.r) ±(0.5%o.v % o.r) Impedance 10MΩ (Approx.) DC Current Measurement Range 2mA 20mA 200mA 2000mA 10A Resolution 100nA 1μV 10μV 100μV 1mA AC Current Measurement Range 2mA 20mA 200mA 2000mA 10A Resolution 100nA 1μV 10μV 100μV 1mA Accuracy ±(0.2%o.v %o.r) ±(0.3%o.v %o.r) Accuracy Form 40Hz to 400Hz1μV ±(0.7%o.v %o.r) Form 40Hz to 400Hz ±(1%o.v %o.r) Protection Fuse(2A) Not Protection Fuse(2A) Not AC Voltage Measurement Range 2V 20v 200v 750v Resolution 100μV 1mV 10mV 100mV Accuracy Form 40Hz to 10kHz ±(0.5%o.v %o.r) Form 40Hz to 100Hz ±(1%o.v %o.r) Crest Factor : up to 7 Impedance 10MΩ (Approx.) Resistor Measurement Range 2kΩ 20kΩ 200kΩ 2MΩ 20MΩ Resolution 100mΩ 1Ω 10Ω 100Ω 1kΩ Accuracy ±(0.1%o.v %o.r) +50 mω) ±(0.2%o.v %o.r) Max. Input 500V OR 500V AC Peak 124 Part4 Test & Measurement

8 Multi Function ED-4770 COMBO TESTER Electricals Electonics Embedded DC Power Supply <25V,1A(Dual) Output DC Power Supply> General Features» 0~25V,1A Dual Output» High Stability, Low Ripple» Current Limit Function Output Voltage : 0~25V(Dual Variable Output) Output Current : 0~1A(Dual Variable Output) Ripple And Noise : < 1mV Resolution» Line : 2.5mV below» Load : 0.05% below Resolution» Voltage : 100mV(Digital Volt-meter)» Current : 1mA(Digital Ampere-meter) Transient Recovery Time» Below 80μs Indicator» 4digits Digital Meter Current Limit» 10mA to 1000mA New& Renewable energy IT/ Communication GENERAL HARACTERISTICS ACCESSORIES Input Voltage : 220V AC ±10%, 50/60Hz Dimensions : 293(w) x 92(H) x 388(D)mm Weight : 5.4kg Test Lead : 1ea Banana Cord : 2ea BNC-BNC Cable : 2ea AC Power Cord : 1ea Instruction Manual : 1ea Test& Measurement Intelligent Robot/ Automation Mechatronics Simulation Software Pneumatics Hydraulics 125

9 Spectrum Analyzer PSA GHz SPECTRUM ANALYZER The Model PSA-6000 Spectrum Analyzer is a fully synthesized RF Spectrum Analyzer featuring simple user controls which allow the novice or the seasoned expert to use the PSA-6000 right out of box. The PSA-6000 provides you with a powerful RF test and measurement tool for CDMA and WCDMA RF systems, broadcast RF systems, ISM Band, Wireless LAN applications, EMI/EMC. The features include 6.4 color display, centronics printer, internal memory, USB host, built in CDMA measurement(acp,channel Power and Occupied Bandwidth). The PSA-6000 Spectrum Analyzer gives educational institutions, mobile and communication system manufactures and RF product service centers a quality RF test instrument at an unbelievably affordable price. > FEATURES High-performance Digital Synthesizer Method Wide Frequency Coverage : 9kHz~6.2GHz Superior Resolution : Minimum 1Hz Compact & Portable Size Wide Input Dynamic Range : -105~20dBm Ease-of-use Key Buttons CDMA Measurement : ACPR, ACLR, OCBW, Channel Power Various and Convenient Interfaces : USB, LAN 0.5 ppm High Precision Reference Various and Convenient Interfaces Auto Set Function GPIB(Option), LAN(Option), RS-232C, Printer, EXT Trigger REF I/O(10 MHz) Automatically displays and sets maximum signal trace 126 Part4 Test & Measurement

10 Spectrum Analyzer PSA-6000 Remote Control Function Remote Controls the Analyzer and Manages Fata Thru PC or Internet Save/Recall Function Saves and Manages Measurement trace and its State in the Internal Memory GHz SPECTRUM ANALYZER 4. USB Interface Can store measured data into the USB Memory through its builtin USB Host that supports USB 1.1 and USB 2.0(GIF Format). Can convert measured data to MS Excel as it also supports the CSV file format. Supports Nearly all types of printers such as Centronics printer and USB interface printer. Firmware can be upgraded through USB by clicking on our website, 5. Large Internal Memory Space Waveform : Stores Maximum 900 waveforms State : Stores Maximum 3,000 states Easily stores/calls waveforms and states of the equipment based on various types of application and usage Electricals Electonics Embedded New& Renewable energy IT/ Communication High Definition 640x480 Color TFT LCD High definition color TFT LCD enables high precision measurement and natural data display. 2. Simple and Easy to use KEY Keys are allocated for user s conveniences so that users can be easily familiar with them. And they Provide various functions. 3. CDMA Measurement Channel Power(CHP) Measurement : The PSA-6000 model provides power measurement functions for mobile communication and simple menus. Measured values are automatically displayed at the bottom of trace. OBW Measurement : Measures the Occupied Bandwidth(OBW) of modulation signal in the unit of %. ACP Measurement : Measures the influence of transmitted power on the Adjacent Channel, or the ratio of power to the Adjacent Channel throughout the mobile communication system using multi-channel. 3 Frequency» Range : 9kHz to 6.2GHz» Resolution : Minimum 1Hz» Span Range 100Hz/div to 600MHz/div 1,2,5Steps Selection(Automatic), ZERO Span, FULL Span (9kHz to 6.2GHz)» Frequency Selection : Start, Stop, Center Span Setup» Span Accuracy : ±3% of the Indicated Span Width» Readout Accuracy : ±(Indicated Frequency x reference Frequency Accuracy+Span x Span Accuracy+50% of RBW)» Phase Noise : khz offset Amplitude» Range : +20dBm~-105dBm» Average Noise Level(1 khz RBW, 10Hz VBW) -105dBm : 150kHz~2.7GHz -100dBm : 2.7GHz~6.2GHz» Amplitude Unit : dbm, dbmv, dbμv, V, mv, μv, W, mw, μw» Display Scale Linearity ±1.5dB/70dB(10dB/div), ±1.5dB/40dB(5dB/div) ±0.5dB/8dB(1dB/div), ±0.5dB/16dB(2dB/div)» Frequency Response(based on 0dB Atten) -3.5~1.5dB(100kHz~10MHz) ±1.5dB(10MHz~6.2GHz)» Reference Level Range : 20dBm~-90dBm Resolution : 0.1dB Accuracy : ±1.5dB» 2nd Harmonic Distortion : -60dBc, -40dBm input» Intermodulation Distortion : -70dBc, -40dBm Input» Residual Spurious : -85dBm(Input terminated, 0dB attenuation)» Other Input Spurious : -60dBc, -30dBm Input Test& Measurement Intelligent Robot/ Automation Mechatronics Simulation Software Pneumatics Hydraulics 127

11 Spectrum Analyzer PSA GHz SPECTRUM ANALYZER» Resolution Bandwidth Selection : 1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz Accuracy : ±20% Selectivity : 60dB/3dB Ratio < 15:1 60dB/6dB Ratio < 12:1(9kHz, 120kHz) Switching Error : ±1.0dB(1 khz Reference RBW)» Video Bandwidth : 10Hz to 3MHz in Step Sweep» Rate : 100 ms to 1000 Sec, 40 ms to 1000 Sec(Zero Span)» Accuracy : ±20%» Trigger Source : External(rear), Video, Freerun, Line» Trigger Modes : Continuous, Single» Trigger Level : TTL level Screen Display» Type : 6.4 Color TFT LCD» Display Resolution : 640(H) x 480(V) active display area» Marker Mode Peak Search, Delta Marker, Marker to Center Marker to Reference(8 Markers Maximum) Input» RF Input Connector : N type Female, 50 ohm Nominal» VSWR 150kHz~3.0GHz : VSWR <1.5:1(based on 0 dbm Ref Level) 3.0GHz~6.2GHz : VSWR < 2:1(based on 0 dbm Ref Level), Typical < 1.5:1» Maximum Input Level : 0 VDC, +20dBm Memory» Trace Storage : Maximum 900 waveforms» Setup Storage : Maximum 3000 states Standard(10MHz, Ref.)» Temperature Stability : ± 0.5ppm» Aging : ± 0.5ppm/Year» Connector : BNC Female» Input Level : -5dBm to +15dBm» Output Level : 10MHz, +8dBm Nominal Interface» RS-232C : Null Modem for Remote Control» Printer Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet Connector : Standard 25 Pin female D-Sub using parallel connector» USB Host Printer Drive : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet USB Storage Device : Supports 1.1 and 2.0, image file for storage, GIF format» Ethernet(Option) 10-Base-T Ethernet : Supports Internet remote control» GPIB Interface(Option) : IEEE 488 bus GENERAL CHARACTERISTICS» Dimension : 350(W) x 195(H) x 375(D)mm» Weight : 10kg» Warming up Time : 20 minutes for the precision measurement» Power Source Voltage and Frequency : 100~240 VAC at 50/60Hz Power Consumption : 80 Watts maximum without options» Operating Temperature : 0 C to 40 C» Storage Temperature : -20 C to 70 C» RF Emissions, Immunity RF Emissions : EN 55011, FCC PART15 Section RF Immunity : EN OPTION GPIB Interface(IEEE 488 Bus) Ethernet Interface : for Internet Remote Control Soft Carrying Case General Kit Set CATV Kit Set 128 Part4 Test & Measurement

12 Spectrum Analyzer PSA GHz SPECTRUM ANALYZER PSA-3000 is digital synthesizer method Spectrum Analyzer of wide-band frequency and dynamic range. It is popular spectrum analyzer widely applicable to the mobile telecommunications(cdma/wcdma), RF system, broadcastings, EMI/EMC and so on. It provides various state of the art functions like 6.4 inch Color TFT LCD, Centronics Printer, USB Host for data storage, CDMAmeasuring functions(acp, Channel Power, Occupied Bandwidth) with its reasonable prices. It can be used for education authorities for mobile telecommunications and RF, production lines for terminal and telecom equipment as well as for maintenance purposes. Electricals Electonics Embedded New& Renewable energy IT/ Communication Test& Measurement Intelligent Robot/ Automation > FEATURES High-performance Digital Synthesizer Method Wide Frequency Coverage : 9kHz~3.0GHz Superior Resolution : Minimum 1 Hz Compact & Portable Size Pre Amp as Standard Wide Input Dynamic Range : -130~20dBm Ease-of-use Key Buttons CDMA Measurement : ACPR, ACLR, OCBW, Channel Power Various and Convenient Interfaces : USB, LAN 0.5 ppm High Precision Reference Mechatronics Various and Convenient Interfaces GPIB(Option), LAN(Option), RS-232C, Printer, EXT Trigger REF I/O(10 MHz) Auto Set Function Automatically displays and sets maximum signal trace Simulation Software Remote Control Function Remote Controls the Analyzer And Manages Fata Thru PC or Internet Save/Recall Function Saves and Manages Measurement trace and its State in the Internal Memory Pneumatics Hydraulics 129

13 Spectrum Analyzer PSA GHz SPECTRUM ANALYZER Internal Memory of Large Storage Capacity Storage Capacity for Waveforms : Maximum 900 waveforms Storage Capacity for States : Maximum 3,000 states Easily stores waveforms and states of equipments according to the various application and use High Definition 640 x 480 Color TFT LCD With its high definition color TFT LCD, users rarely feel fatigues on their eyes even after long-hours of use. It provides high precision measurement as well as natural data output 2. Simple and Easy to use KEY Keys are allocated for user s conveniences so that users can be easily familiar with them. And they provide various functions. 3. CDMA Measurement Channel Power(CHP) Measurement : It measures the power of mobile telecommunications channel. It screens out the output data automatically with its simple menu operation. OBW Measurement : It measures the Occupied bandwidth of modulation signal by %. ACP Measurement : It measures the effects on Adjacent Channel caused by transmitted power or the power rates with Adjacent Channel in Mobile Telecommunication Systems using multi channels. It checks all measured values and waveforms on one screen. 4. USB Interface Stores measured data in USB memory with USB Host supporting USB 1.1, 2.0(GIF Format) Converts measured data into MS Excel by supporting CSV file format Supports all types of printer not only Centronics printer but USB Interface printer Upgrade the Firmware of Analyzer through USB by downloadingthe upgraded firmware provided in ED company s Website. Frequency» Range : 9kHz to 3.0GHz» Resolution : Minimum 1Hz» Span Range 100Hz/div to 300MHz/div 1,2,5Steps Selection(Automatic), ZERO Span, FULL Span(9kHz to 3.0GHz)» Frequency Selection : Start, Stop, Center Span Setup» Span Accuracy : ±3% within a designated Span range» Readout Accuracy : ± (Indicated frequency x Reference Frequency Accuracy + Span x Span Accuracy + 50% of RBW)» Phase Noise : -90dBc/Hz(Based on 10kHz Offset) Amplitude» Range : +20dBm~-105dBm, +20dBm~-130dBm(Pre Amp ON)» Average Noise Level(1kHz RBW, 10Hz VBW) -105dBm : 150kHz~2.7GHz -127dBm(Pre Amp On) : 20MHz~2.7GHz -100dBm, -123dBm(Pre Amp On) : 2.7GHz~3GHz -130dBm(Pre Amp On) : Typically» Amplitude Unit : dbm, dbmv, dbμv, V, mv, μv, W, mw,μw» Display Scale Linearity ±1.5dB/70dB(10dB/div), ±1.5dB/40dB(5dB/div) ±0.5dB/8dB(1dB/div), ±0.5dB/16dB(2dB/div)» Frequency Response(Based on OdB Atten) -3.5~1.5dB(100kHz~10MHz) ±1.5dB(10MHz~3GHz)» Reference Level Range : 20dBm~-90dBm Resolution : 0.1dB Accuracy : +/-1.5dB» 2nd Harmonic Distortion : -60dBc, -40dBm Input» Intermodulation Distortion : -70dBc, -40dBm Input» Residual Spurious : -85dBm(Input Terminated 0 db Attenuate)» Other Input Spurious : -60dBc, -30dBm Input 130 Part4 Test & Measurement

14 Spectrum Analyzer PSA GHz SPECTRUM ANALYZER Electricals Electonics Embedded» Resolution Bandwidth Selections : 1kHz, 3kHz, 10kHz, 30kHz, 100kHz, 300kHz, 1MHz, 3MHz, 9kHz, 120kHz Accuracy : ±20% Selectivity - 60dB/3dB ratio < 15:1-60dB/6dB ratio < 12:1(9kHz, 120kHz) Switching Error : ±1.0dB(1kHz Reference RBW)» Video Bandwidth : 10Hz to 3MHz in step Sweep» Rate : 100 ms to 1000 sec, 40 ms to 1000 sec (Zero Span)» Accuracy : ±20%» Trigger Source : External(Rear), Video, Freerun, Line» Trigger Modes : Continuous, Single» Trigger Level : TTL Level Memory» Trace-Setup Storage Trace Storage : Maximum 900 waveforms Setup Storage : Maximum 3000 states Screen Display» Type : 6.4 Color TFT LCD» Display Resolution : 640(H) x 480(V) active display area» Marker Modes Peak search, Delta marker, Marker to Center Marker to Reference(8 Markers Maximum) Input» RF Input Connector : N type Fem ale, 50 ohm Nominal» VSWR 150 khz~3.0 GHz, VSWR<1.5:1(Based on 0 dbm Ref Level)» Maximum Input Level : 0 VDC, +20dBm Standard Frequency(10MHz, Ref.)» Temperature Stability : ±0.5 ppm» Aging : ±0.5 ppm/year» Connector : BNC Female» Input Level : -5dBm to +15dBm» Output Level : 10MHz, +8dBm nominal Interface» RS-232C» Printer Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet Connector : Standard 25 Pin female D-Sub using Parallel Connector» USB Host Printer Driver : PCL Command, HP, EPSON, Laser-Jet, Desk-Jet USB Storage Device : Supports 1.1 and 2.0, image file for storage, GIF format» Ethernet(Option) 10-Base-T Ethernet : Supports Internet Remote Control» GPIB Interface(Option) : IEEE 488 bus GENERAL CHARACTERISTICS» Dimensions : 350(W) x 195(H) x 375(D)mm» Weight : 10 kg» Warming up time : 20 minutes for the precision measurement» Power Source Voltage and Frequency : VAC at 50/60Hz Power Consumption : 80 Watts maximum without option» Operating Tempcerature : 0 C to 40 C» Storage Tempcerature : -20 C to 70 C» RF Emissions, Immunity RF Emissions : EN 55011, FCC PART15 Section » RF Immunity : EN OPTION Tracking Generator GPIB Interface(IEEE 488 Bus) Ethernet Interface : for Internet Remote Control Soft Carrying Case General Kit Set CATV Kit Set New& Renewable energy IT/ Communication Test& Measurement Intelligent Robot/ Automation Mechatronics Simulation Software Pneumatics Hydraulics 131

15 Spectrum Analyzer RF SYS-3000 RF SYSTEM DESIGN KIT Signal Generator including Local OSC function Active/passive modules comprising the RF System Design kit Transmitter/Receiver for mobile communication > EXPERIMENTS How to Use Spectrum Analyzer / Scalar Network Analyzer» Usage of Spectrum Analyzer / Scalar Network Analyzer which is the basis of RF measurement, along with calibration procedures Passive Module (Element)» Attenuator, Monolithic Filter(LPF, HPF, BPF), Microstrip Filter(BPF, LPF), SAW Filter(RF, IF), Duplexer, Combiner / Divider, Antenna, Coupler, Detector(Log Amp, Schottky Diode) RF MMIC Module (Element)» RF Switch, Relay Switch, RF Digital Step Attenuator, Voltage Variable Attenuator Frequency Conversion» Understanding of frequency conversion through performing experiments on Mixer and MMIC Mixer, mathematical frequency conversion and actual differences in frequency conversion through the Mixer element Local OSC, PLL Synthesizer» Design of OSC, VCO and Reference(VCXO, TCXO, VCTCXO, OCXO) PLL Synthesizer Amplifier» Understanding and performance verification of Gain Block Amp, Low Noise Amp and Power Amp Direct Digital Synthesizer (DDS)» Various applications of DDS, a precision digital element Frequency Doubler / Divider» Verification of the Frequency Doubler / Divider characteristics for RF System and Local OSC expansion Tx DAC, Baseband LPF, IQ Modulator, IQ Demodulator, Transmitter / Receiver» Conversion of Analog Baseband from the Digital Baseband, IF or RF conversion at the Baseband, QPSK using the Modulator and characteristics of RF Transmitter in digital communications ; and verification of each performance through Spectrum Analyzer Up/Down Converter, Small-size Repeater, Signal Generator» Basic principles and design applications of Up/Down Converter, Small-size Repeater and Signal Generator in the system block RF System Parameter» System performance testing and verification on Noise Figure, Noise Floor, Harmonic, Inter Modulation, P1dB, IP3, Insertion Loss, Isolation, VSWR, S-Parameter, Frequency Accuracy, Amplitude Accuracy, Linear Scale_dB Scale,Phase Noise, Phase Linearity CDMA, WCDMA Modulator / Demodulator» Analog base band at digital signals, CDMA through IQ modulation and creation processes of WCDMA signal; and CDMA and WCDMA demodulation processes and theories through IQ demodulation Waveform Generator» Understanding of the Waveform Generator(Function Generator) that generates CW Sine, Triangle Wave and Square Wave 132 Part4 Test & Measurement

16 Spectrum Analyzer RF SYS-3000 > CONFIGURATION RF System Design Kit PSA-3000+Tracking Generator(Option) Operation Manual Accessories» SMA(m)~SMA(m), 1meter : 2ea» SMA(m)~SMA(m), 30cm : 4ea» 800MHz ANT : 2ea Spectrum Analyzer(PSA-3000)+Tracking Generator Performance Test for Module/System Capability of Scalar Network Analyzer with Tracking Generator High Performance Digital Synthesizer mode» Frequency Rance : 9KHz~3GHz» Amplitude Rance : -130dBm~20dBm RF SYSTEM DESIGN KIT Test Module/System Module Kit Performance Test for Module/System Composed of Module/System used in industrial sites Includes Local OSC, a function of Signal Generator Active/Passive module to comprise the system Transmitter/Receiver for mobile communication Electricals Electonics Embedded New& Renewable energy IT/ Communication 1. PLL Synthesizer Frequency Range : 700~1600MHz Output Power : Above 7dBm(Max 17dBm) Phase Noise : < 10kHz Offset 10 MHz Ref TCXO Frequency : 10MHz Temperature Stability : ±2ppm Aging : ±2ppm/Year 2. CDMA Transmitter(Including IQ Modulator) Frequency Range : 870~890MHz(Step 1MHz) Modulation : CDMA 2000 : Pilot Channel, WCDMA : CPICH Output Power : -12dBm~-27dBm(1dB Step) Modulation Quality(Rho, EVM) : > Direct Digital Synthesizer Frequency Range : 1~120MHz Frequency Resolution : 1Hz Output Power : 5~-10dBm(±2dB) Output Type : TTL or CW Modulation : FM, AM, PM, FSK, PSK, ASK 4. Frequency Up Converter Intermediate Frequency : 70 ±5MHz Input Power Level : Below -10dBm RF Output Frequency : 880 ± 10MHz RF Output Level(-10dBm Input) : 6.8dBm(±1dB) System Gain : 16 ± 1dB PLL Module Frequency : 800~820MHz Output Power : 3dBm 5. Frequency Down Converter RF Input Frequency : 880 ± 10MHz RF Input P1dB : -6dBm System Gain : 19dB IF Output Frequency : 70 ± 5MHz 6. Frequency Divider Input Frequency : 700~1600MHz Input Power : -12~12dBm Output Frequency» Input Frequency/2» Input Frequency/4 Test& Measurement Intelligent Robot/ Automation Mechatronics Simulation Software Pneumatics Hydraulics 133

17 Spectrum Analyzer RF SYS-3000 RF SYSTEM DESIGN KIT > CONFIGURATION 7. Detector Frequency : DC~440MHz Slope : +24mV/dB Dynamic Range : 95dB 8. Pin Diode Switch Frequency Range : 300kHz~3GHz Insertion Loss : 4dB(@ 1GHz) Isolation : 20dB or above 9. Mixer RMS-30» LO/RF Frequency : 200MHz~3GHz» IF Frequency : DC~1GHz» LO Power : 7dBm or above» Conversion Loss : Max 9.8dB Short Key Diode Mixer - HSMS282R» LO/RF Frequency : 700MHz~1.2GHz» IF Frequency : 10~130MHz» Conversion Loss : Max 14dB 10. Gain Block Amp Amp 1» Frequency Range : 250~4000MHz» Gain : Max 13.5dB(Typical 10dB)» P1dB : 22dBm, OIP3 : 41dBm, NF : 3dB Amp2» Frequency Range : 700~1000MHz» Gain : Max 14dB(Typical 10dB)» P1dB : 17dBm, OIP3 : 35dBm, NF : 0.9dB Amp3» Frequency Range : DC~7GHz, Gain : Max 22dB, P1dB : 9dBm, OIP3 : 22 dbm, NF : 4.9dB 11. Waveform Generator Frequency : 1Hz~1MHz Waveform : CW Sine, Triangle Wave, Rectangular Wave 12. VCO Frequency Range : 630~950MHz Output Power Level : -10~-6dBm 13. Voltage Variable Attenuator Frequency Range : 100kHz~3MHz Insertion Loss : Max 4.5dB Attenuator Range : 30dB Attenuation Control Voltage : 0~2.4V 14. CDMA Receiver(Including IQ Demodulator) RF Input Frequency : 880 ± 10MHz Input Power : -12~-35dBm Output Signal : Baseband Analog I, Q 15. Digital Step Attenuator Frequency Range : 9kHz~3GHz Attenuation Step : 1dB(Total 31dB Range) 16. Passive Attenuator Type : Pi, T Type Attenuation : 3dB(@ 500MHz), 5dB(@ 500MHz), 10 ± 1dB 17. LC Filter LPF : Butterworth, Chebyshev HPF : Butterworth, Chebyshev BPF : Butterworth, Chebyshev 18. SAW Filter Frequency : 70MHz, 836.5MHz, 881.5MHz 19. Duplexer Duplexer 1» Frequency : RX ± 12.5MHz, TX ± 12.5MHz» Insertion Loss : 4dB Duplexer 2» Frequency : RX 1765 ± 12.5MHz, TX 1855 ± 12.5MHz» Insertion Loss : Typical 4dB(Max 9dB) 20. DR Filter Frequency : 800MHz, 1100MHz 21. Power Combiner/Divider Wilkinson Combiner/Divider» Frequency : 2.1~2.7GHz» Loss : 4.5dB» Isolation : 10dB or above TCP-2-25» Frequency : 200~2500MHz» Loss : Max 6dB» Isolation : 15dB 22. Microstrip Filter Edge Coupled Type BPF» Center Frequency : 1.65GHz» BW : 270MHz Hairpin Type BPF» Center Frequency : 1.7GHz» BW : 250MHz Elliptic Type LPF : -3dB BW ; 2GHz Stub Type LPF : -3dB BW ; 1.85GHz 134 Part4 Test & Measurement

18 Spectrum Analyzer RF SYS-3000 RF SYSTEM DESIGN KIT > CONFIGURATION 23. Coupler Coupled Line Coupler» Frequency : 700~900MHz» Insertion Loss : 0.5dB» Coupling Value : Typical 20dB(Min 17dB) Coupled Line Coupler» Frequency : 1000~2400MHz» Insertion Loss : 1.5dB» Coupling Value : Typical 18dB Branch Line Coupler» Frequency : 1600~2000MHz» Insertion Loss : 5 db» Coupling Value : Typical 5dB» Phase : 90 GENERAL CHARACTERISTICS Dimension : 525(W) x 180(H) x 340(D)mm Weight : 7.4kg Power : 100~240VAC at 50/60 Hz Operating Temperature : 0 C~35 C Storage Temperature : -10 C~50 C ACCESSORIES SMA(m)~SMA(m), 1meter : 2ea SMA(m)~SMA(m), 30cm : 4ea 800MHz ANT : 2ea Experiment Manual : 1ea Electricals Electonics Embedded New& Renewable energy IT/ Communication Test& Measurement Intelligent Robot/ Automation Mechatronics Simulation Software Pneumatics Hydraulics 135

19 Counter & Bridge FC-1300B/FC1130B UNIVERSAL COUNTER (3GHz/1.3GHz) Frequency : 0.1Hz~3GHz [FC-1300B], 0.1Hz~1.3GHz [FC-1130B] High stability built-in TCXO, Microprocessor [FC-1300B] High accuracy and sensitivity High resolution 8 digit 7 segment LED display Multi-functional measurement and self-check > EXPERIMENTS Display : 8 Digits(7 Segment LED) Indicator : MHz, khz, μs, G.T(Gate Time), Hold Over, Trigger Frequency Measurements» Input A(Hi) : 10MHz~100MHz» Input B(Lo) : 0.1Hz~10MHz» Input C : 100MHz~1.3GHz(FC-1130B 100MHz~3GHz(FC-1300B)» Accuracy : ±Time Base Error ±1 Count» Resolution : 0.1/1/10/100Hz(Input A-Low Mode) 1/10/100/1000Hz(Input A-High Mode)» Gate Time : 10/1/0.1/0.01s Period Measurement» 200ms~0.5μs(at INPUT A)» Accuracy : ± Time Base Error ±1 Count ± Input A Trigger Error» Resolution : 100ps/1ns/10ns/100ns Ratio Measurement» Input A : 10MHz~100MHz» Input B : 0.1MHz~10MHz» Accuracy : Input B Trigger Error (Input BxGate Time) ±1 Count» Resolution : ±Input B (Input A x Multiplier)» Multiplier : 1, 10, 100, 1000 Totality Count» DC~10MHz(at Input A)» Capacity : 0~ (Overflow)» Speed : 10⁷/s Max. Time Interval Measurement» 0.5μs~200ms» Accuracy : ± Time Base Error ± 1 Count ± Input A Trigger Error ± Multiplier» Resolution : 100ps/1ns/10ns/100ns» Multiplier : 1, 10, 100, 1000» Min. Pulse Width : 250ns Input Impedance» Input A, B : 1MΩ, <40pF» Input C : 50Ω Coupling» Input A, B : AC or DC» Input C : AC Low Pass Filter : 100kHz(Input A, B) Attenuator : x1 or x10(input A, B) Maximum Input» Input A, B : 250V(DC+AC Peak)» Input C : 3Vrms Sine Wave Self-check» 10MHz» Gate Time : 10/1/0.1/0.01s Base Signal Output» Open : 1Vp-p Min. at 1MΩ» 50Ω : 500mVp-p Min. Time Base Stability : 3x10 ⁶ /week Operating Temperature» 0~40 C, Below 85% R.H.(Accuracy Specified at 25 C ±5 C ) Input Voltage : AC 100/120/220/240V±10%, 50/60Hz Dimension : 255(W) x 100(H) x 270(D)mm Weight : 1.9kg ACCESSORIES Input Cord : 1ea RS-232C Cable : 1ea AC Power Cord : 1ea Spare Fuse : 2ea Operation CD : 1ea Instruction Manual : 1ea 136 Part4 Test & Measurement

20 Meter PM-3001D POWER METER Small-size RF Power Meter with power sensor Ideal measurement of power transfer characteristics, I/P vs O/P Power 8 Character x 1 Line LCD with backlight Electricals Electonics Embedded New& Renewable energy IT/ Communication Test& Measurement Power Meter Power Sensor Cable AC Adapter Frequency Range : 0.01~12.4GHz Power Sensor : Diode Sensor Display : 8 Character x 1 Line LCD Power Reading Ranges» 0~99.9mW in 3 Ranges [XXX uw, X.XX mw, XX.X mw] Max. Safe Input Power : 200mW Peak Power Rating : 1W 1s Input Impedance : 50Ω Input VSWR(max)» 1.4 : 1 Input Connector : Type N Male Response Time : 0.1s Calibration Frequency : 10GHz(7GHz) Accuracy of Calibration : ±2% Frequency Flatness : ±0.5dB(Ref 7GHz) Power : 9V Alkaline Battery or AC Adapter Operating Temperature Range : 0 C~+40 C Dimension» Meter : 70(W) x 45(H) x 140(D)mm» Sensor : 30(W) x 25(H) x 85(D)mm Weight : 0.75kg(Meter+Sensor+Cable+AC Adapter) Intelligent Robot/ Automation Mechatronics Simulation Software Pneumatics Hydraulics 137

21 Meter SWR-3002 SWR METER Accurately, Read SWR directly on the scale Operating frequency 1kHz with variable bandwidth 15~130Hz Calibration factor of output amplifier is 110dB with the o/p terminal on the rear panel Meter scale shows Square Law Characteristics using Crystal Detector Sensitivity : 1V FS Noise : Below 7.5dB FS at Rated Sensitivity with input terminated 5000Ω Range : 70dB(10dB and 2dB step) Accuracy : ±0.05dB(10dB step) Input Impedance : 2500 to 1000Ω Optimum Source Impedance for Low Noise Input Frequency : 1000Hz, Adjustable 7% Bandwidth : 15 to 130Hz, Adjustable Amplifier Output : 0~0.3Vrms(NORM), 0~0.8Vrms(EXPAND) Meter Scale Tuned for Square-law Detectors Mechanism Taut-band Suspension Input Voltage : 220V, 50/60Hz Dimension : 325(W) x 285(H) x 220(D)mm Weight : 4kg 138 Part4 Test & Measurement

22 Power Supply ED-333T 3-Mode(Independent, Parallel, Series Tracking) 0~60V DC(3A), 0~30V DC(6A) & Fixed 5V(3A) Adjustable voltage limit Overload protection & overvoltage protection 180W 3-MODE TRACKING DC POWER SUPPLY Electricals Electonics Embedded New& Renewable energy IT/ Communication Test& Measurement Intelligent Robot/ Automation Output Mode : Independent, Tracking(Parallel, Series) Output Voltage/Current MODE OUTPUTVOLTAGE OUTPUT CURRENT Independent Tracking Parallel Series Fixed Output 0~30V Dual(Output) 0~±30V 0~30V 0~60V 5V 0~3A Dual(Output) 0~±3A 0~6A 0~3A 3A Ripple Rejection : Not Exceeding 0.02%+1.5mV(Series Mode : 0.02 %+3mV) Regulation(Line) : Not Exceeding 0.03%+1.5mV (Load) : Not Exceeding 0.03%+3mV Tracking Mode Series Regulation : Below 300mV Tracking Error : Not Exceeding 0.5%+10mV Indicator» (Voltage) : 2 Digital Voltmeter & L.V(Limiting Voltage)» (Current) : 2 Digital Ammeter & C.C(Constant Current) Protection» Overload Protection» Overvoltage Protection Operating Temperature : 0~45 C, Below 85% R.H. Input Voltage : AC 220V, 50/60Hz Dimension : 325(W) x 145(H) x 290(D)mm Weight : 12kg ACCESSORIES Output Cord : 1set AC Power Cord : 1ea Instruction Manual : 1ea Mechatronics Simulation Software Pneumatics Hydraulics 139