PRODUCT CATALOGUE HYDROSTATIC PROBES SCREW-IN TRANSMITTERS

Transcription

1 PRODUCT CATALOGUE HYDROSTATIC PROBES SCREW-IN TRANSMITTERS

2 PRESSURE AT THE HIGHEST LEVEL Successful medium-sized companies are not successful because they are active in many areas, but rather because they concentrate on one area and do it better than anyone else With 60 employees at 4 locations in Germany, the Czech Republic, Russia and China BD SENSORS has solutions from 0. mbar to 6000 bar: > > pressure sensors, pressure transducers pressure transmitters > > electronic pressure switches > > pressure measuring devices with display and switching outputs > > hydrostatic level probes INDEX PROBES 5-88 PRECISION: STAINLESS STEEL PROBES stainless steel sensor 5-0 ceramic sensor -4 INDUSTRY: STAINLESS STEEL PROBES stainless steel sensor 5-40 ceramic sensor 4-68 This is our philosophy. That s why BD SENSORS has concentrated on electronic pressure measurement technology from the beginning. Two pressure transmitters and a submersible probe, based on a stainless steel silicon sensor were the beginning. Today the range extends to more than 70 pro- INDUSTRY: PLASTIC PROBES stainless steel sensor 69-7 ceramic sensor 7-88 With our unremitting product and and quality strategy we have been successful in becoming a major player on the world market for electronic pressure ducts, from economical OEM devices to high-end products with HART communication or field bus interface. In addition we have developed hundreds of - SCREW-IN TRANSMITTERS stainless steel sensor 89-9 ceramic sensor 9-00 sensing devices within a few years. specific applications, underlining the competence and flexibility of BD SENSORS. The excellent price/performance SPECIAL VERSIONS 0-04 ratio of our products is proof of the fact that we are able to meet the toughest demand: Being a problem-solver for our ACCESSORIES 05- s. 4 ARGUMENTS 4 For large production batches as well as for small production numbers, no matter for what medium or external factors, with almost any mechanical or electrical connection - we solve your problem flexibly, quickly and cost-efficiently.

3 MATRIX PROBES housing material up to 0 00 EX 9- LMK 8H up to 0 00 EX, HART -6 LMK 458H up to 0 00 EX, HART, DNV, GL, CCS 7-0 LMK 58H 9.5 EX, HART -4 LMP up to 0 50 LMP up to 0 50 LMP 07T 7 0 up to 0 50 LMP up to 0 50 LMK up to 0 00 LMK up to 0 50 LMK 07T 6,5 0 4 up to 0 50 LMK up to 0 00 EX 5-56 LMK 87 0 up to 0 00 EX LMK up to 0 00 EX, DNV, GL, CCS 6-64 LMK up to 0 00 EX up to 0 00 SIL 69-7 LMP 07i page separable certificates not separable LMP 08i aggressive media 5-8 fuel and oil EX sewage water up to 0 00 pressure range / level [mho] ceramic sensor stainless steel sensor 6.5 CuNiFe plastic 5 cablesensor ø [mm] preferred areas of use LMP 07i stainless steel 4 precision up to 0 00 Stainless Steel Probe Stainless Steel Sensor accuracy according to IEC 60770: : 0. % FSO industry 5 LMK up to 0 00 LMK up to up to 0 00 LMK up to 0 00 EX, SIL LMP 808 LMK EX, SIL EX, SIL Nominal pressure 7-40 from mho up to mho 4-44 Output signals LMK LMK 5 Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. -wire: ma -wire: V Preferred areas of use are Special characteristics diameter 6.5 mm small thermal effect excellent accuracy excellent long term stability Water / filtrated sewage drinking water system ground water level measurement rain spillway basin pump and booster stations level measurement in container 7-76 SIL screw-in transmitter LMP The stainless steel probe LMP 07i is designed for continuous level measurement in water and clean or waste fluids. 0 up to EX, SIL, UL up to EX, SIL, UL up to mbar up to 0 0 bar EX,UL Optional versions IS-protection zone 0 cable protection via corrugated pipe different kinds of cables different kinds of seal materials water treatment plants water recycling Fuel / Oil fuel storage tank farm special versions EP 500 GL, CCS 0-04 BD SENSORS GmbH BD-Sensors-Straße Tel: +49 (0) 9 5 / 98-0

4 LMP 07i 6 7 LMP 07i LMP 07i Stainless Steel Probe Technical Accessories Data Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] On request we adjust the device within the turn-down-possibility by software on the required pressure range. Output signal / Supply Standard -wire: ma / V S =... 6 V DC Option Ex-protection -wire: ma / V S = V DC Options -wire -wire: V / V S = V DC Performance nominal pressure 0. bar: ± 0. % FSO nominal pressure < 0. bar: ± 0. % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Tolerance band [% FSO] ± 0. in compensated range C TC [% FSO / 0K] ± 0.0 in compensated range C Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Insulation resistance > 00 MΩ Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-0 70 C) black FEP 4 (-0 70 C) black cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) Protection cap stainless steel.4404 (6L) stainless steel.445 (6L) POM Explosion protection (only for ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9-LMP 07i zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing Ambient temperature range in zone 0: C with p atm 0.8 bar up to. bar in zone or higher: C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Miscellaneous Current consumption max. 5 ma approx. 00 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC ATEX Directive 94/9/EG Mounting flange with cable gland Technical data Suitable for all probes Flange material stainless steel.4404 (6L) Material of cable gland : brass, nickel plated on request: stainless steel.405 (0); plastic Seal insert material: TPE (ingress protection IP 68) Hole pattern according to DIN 507 Version Size (in mm) DN5 / PN40 D = 5, k = 85, b = 8, n = 4, d= 4.4 kg DN50 / PN40 D = 65, k = 5, b = 0, n = 4, d= 8. kg DN80 / PN6 D = 00, k = 60, b = 0, n = 8, d= kg Ordering type DN5 / PN40 with cable gland brass, nickel plated ZMF540 DN50 / PN40 with cable gland brass, nickel plated DN80 / PN6 with cable gland brass, nickel plated Terminal clamp Technical data Suitable for all probes with cable mm Material : steel, zinc plated optionally: stainless steel.40 (04) approx. 60 g Ordering type Terminal clamp, steel, zinc plated Terminal clamp, stainless steel.40 (04) Display program CIT 00 Process display with LED display CIT 50 Process display with LED display and contacts CIT 00 Process display with LED display, contacts and analogue output ZMF5040 ZMF806 CIT 50 Process display with LED display, bargraph, contacts and analogue output Z0058 Z0057 CIT 400 Process display with LED display, contacts, analogue output and Ex-approval CIT 600 Multichannel process display with graphics-capable LC display CIT 650 Multichannel process display with graphics-capable LC display and datalogger CIT 700 / CIT 750 Multichannel process display with graphics-capable TFT monitor, touchscreen and contacts PA 440 Field display with 4-digit LC display For further information please contact our sales department or visit our homepage: cable gland M6x.5 with seal insert (for cable mm) 05 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. LMP07i_E_085

5 LMP 07i PROBES 8 9 LMP 07i Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Stainless steel.445 (6L) Output 4 0 ma / -wire intrinsic safety 4 0 ma / wire 0 0 V / -wire This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice. E for P N 0. bar 0. % for P N < 0. bar 0. % B PVC-cable PUR-cable FEP-cable Cable length in m Special version cable protection with stainless steel corrugated pipe with pipe length in m 9 9 cable with integrated air tube for atmospheric pressure reference Nominal pressure from mh O up to mh O Output signals -wire: ma -wire: V Special characteristics diameter 5 mm cable and sensor section separable excellent accuracy communication connection thermal error in compensated range C: 0. % FSO TC 0.0 % FSO / 0K Turn-Down :0 Optional versions IS-version zone 0 cable protection via corrugated pipe mounting accessories as cable gland and terminal clamp in stainless steel different kinds of cables different kinds of seal materials LMP 08i Separable Stainless Steel Probe Precision Stainless Steel Sensor accuracy according to IEC 60770: 0. % FSO The separable precision stainless steel probe LMP 08i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 6-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping and maintenance the transmitter body is plugged to the cable assembly with a connector and can be changed easily. Preferred areas of use are Water / filtrated Sewage ground water level measurement level measurement in wells and open waters / rain spillway basin level measurement in container water treatment plants water recycling

6 LMP 08i LMP 08i 0 Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] On request we adjust the device within the turn-down-possibility by software on the required pressure range. Output signal / Supply Standard -wire: ma / V S =... 6 V DC with RS- communication interface Option IS-protection -wire: ma / V S = V DC Options -wire: V / V S = V DC Performance Performance after turn-down (TD) - TD :5 - TD > :5 IEC : ± 0. % FSO no change of accuracy formula for accuracy calculating (for nominal pressure gauge 0.40 bar see note ): ± [ x turn-down] % FSO with turn-down = nominal pressure range / adjusted range e.g. follwing accuracy can be calculated for turn-down :0: ± ( x 0) % FSO viz. the accuracy is ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± (0. x turn-down) % FSO / year at reference conditions Response time ca. 00 msec following parameters can be adjusted (interface / software needed 4 ) Adjustability electronic damping: sec offset: % FSO turn-down of span: max. :0 accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) nominal pressure gauges 0,40 bar are excluded; for these the calculation of accuracy is as follows: ± ( x turn-down) % FSO e.g. torn-down :: ± ( x ) % FSO viz. the accuracy is ± 0.6 % FSO 4 software, interface and cable must separate be ordered (software is compatible with Windows 95, 98, 000, NT from version 4.0 or higher and XP) Thermal effects (Offset and Span) Tolerance band [% FSO] ± (0. x turn-down) in compensated range C TC [% FSO / 0 K] ± (0. x turn-down) in compensated range C Permissible temperatures medium: C storage: C electronics / enviroment: C Electrical protection 5 Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 5 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material 6 PVC (-5 70 C) grey PUR (-0 70 C) black FEP 7 (-0 70 C) black 6 cable with integrated air tube for atmospheric pressure reference do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L), EPDM, stainless steel.445 (6L) Protection cap POM Explosion protection (only for ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9-LMP 08 i zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing Ambient temperature range in zone 0: C with p atm 0.8 bar up to. bar in zone or higher: C Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance:signal line/shield also signal line/signal line: µh/m Miscellaneous Current consumption signal output current: max. 5 ma approx. 50 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC ATEX Directive Wiring diagram / connector 94/9/EG -wire-system (current) -wire-system (voltage) Binder series 7 8 p supply + Pin configuration Supply + Supply Signal + (for -wire) RxD TxD GND Binder series 7 8 (5-pin) / -wire Binder series 7 8 (5-pin) / -wire (5-pin) Binder series 7 8 (7-pin) / -wire with communication interface / wh (white) / bn (brown) (6) / gn (green) 4 / ye (yellow) 5 / gr (gray) 7 / gn (green) Binder series 7 8 (7-pin) cable colours (DIN 4700) wh (white) bn (brown) gn (green) Shield 5 5 / gn/ye (green / yellow) gn/ye (green / yellow) 8 in separated version Dimensions (in mm) I V S p U Supply + Supply Signal + V separated version VS option version with corrugated pipe

7 LMP 08i PROBES Pressure Input [mh O] [bar] Output Cable length Version LMP 08i Stainless steel.4404 (6L) Stainless steel.445 (6L) 4 0 ma / -wire Intrinsic safety 4 0 ma / -wire 0 0 V / -wire with communicaton interface prepared for mounting with stainless steel pipe cable protection with stainless steel corrugated pipe with pipe length in m E 0. % in m cable with integrated air tube for atmospheric pressure reference available on request: calibration of individual pressure range higher than 400 mbar with accuracy 0. % Software, interface and cable have to be order separately (: CIS-G; Software appropriate for Windows 95, 98, 000, NT Version 4.0 or newer and XP) 4 stainless steel pipe is not part of the supply in bar in mh O EPDM PVC-cable PUR-cable FEP-cable Windows is a registrated trademark of Microsoft Corporation 4 consult Nominal pressure from cmh O up to mh O Output signals -wire: ma Special characteristics diameter 9.5 mm HART communication (setting of offset, span and damping) permissible temperatures up to 85 C high overpressure resistance high long-term stability Optional versions IS-version zone 0 mounting with stainless steel pipe flange version diaphragm 99.9 % AI O accessories e.g. assembling and probe flange, mounting clamp LMK 8H Stainless Steel Probe with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0. % FSO The stainless steel probe LMK 8H has been designed for continous level measurement in waste water, waste and higher viscosity mediums. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels. Preferred areas of use are Water ground water level measurement rain spillway basin Sewage waste water treatment water recycling Fuel / Oil level monitoring in open tanks with low filling heights fuel storage tank farms biogas plants This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

8 LMK 8 H 4 5 LMK 8 H LMK 8H Stainless Steel Probe Pressure ranges Nominal pressure [bar] Level [mh O] Overpressure [bar] On request we adjust the devices by software on the required pressure ranges, within the turn-down possibility (starting at 0.0 bar). Output signal / Supply Standard -wire: ma / V S =... 6 V DC with HART communication V S rated = 4 V DC Option IS- protection -wire: ma / V S = V DC with HART communication V S rated = 4 V DC Performance P N 60 mbar TD :5 ± 0. % FSO TD max = :0 TD > :5 ± [ x TD] % FSO P N < 60 mbar ± [ x TD] % FSO TD max = : P N bar TD :5 ± 0. % FSO TD max = :0 TD > :5 ± [ x TD] % FSO Permissible load R max = [(V S - V S min) / 0.0 A] Ω load at HART -communication: R min = 50 Ω Long term stability ± (0. x turn-down) % FSO / year at reference conditions Influence effects supply: 0.05 % FSO / 0 V permissible load: 0.05 % FSO / kω Turn-on time 850 msec Mean response time 40 msec without consideration of electronic damping mean measuring rate 7/sec Max. response time 80 msec Adjustability configuration of following parameters possible (interface / software necessary ): - electronic damping: sec - offset: % FSO - turn down of span: max. :0 accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) software, interface, and cable have to be ordered separately (software appropriate for Windows 95, 98, 000, NT Version 4.0 or higher, and XP) Thermal effects (Offset and Span) Tolerance band ± (0. x turn-down) % FSO TC, average ± (0.0 x turn-down) % FSO / 0 K in compensated range C Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection 4 Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 4 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Mechanical stability Vibration 4 g (according to: DIN EN ) Cable outlet with sheat material 5 PVC (-5 70 C) grey PUR (-5 70 C) black FEP 6 (-5 70 C) black TPE (-5 85 C) blue 5 shielded cable with integrated air tube for atmospheric pressure reference 6 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials stainless steel.4404 F EPDM : ceramics Al O 96 % option: ceramics Al O 99.9 % Protection cap Miscellaneous Option cable protection POM Ingress protection IP 68 Current consumption max. ma approx. 400 g (without cable) CE-conformity EMC Directive: 004/08/EC stainless steel pipe for probe in stainless steel: available as compact product (: stainless steel pipe with a total length up to m possible; other lengths on request) IS-protection Approval DX5A-LMK 8H IBExU 0 ATEX 86 X zone 0 7 : II G Ex ia IIB T4 Ga zone 0: II D Ex ia IIIC T85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i =, nf, L i = 0 µh, the supply connections have an inner capacity of max. 7 nf opposite the enclosure Permissible media temperature in zone 0: C with p atm 0.8 bar up to. bar zone or higher: C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m 7 for optional stainless steel pipe following designation is valid: "II G Ex ia IIC T4" (zone 0) Wiring diagram -wire-system (current) HART p I supply + Pin configuration cable colours (IEC 60575) Dimensions (in mm) Supply + Supply Shield wh (white) bn (brown) gnye (green-yellow) thread R" for stainless steel pipe HART is a registered trade mark of HART Communication Foundation; Windows is a registered trade mark of Microsoft Corporation VS flange version dimensions in mm dimensions DN5 / PN40 DN40/ PN40 DN50 / PN40 DN80 / PN6 D K d b f n d

9 LMK 8 H 6 7 PROBES LMK 8H Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Ceramics Al O 96% Ceramics Al O 99.9% C Output HART -communication 4 0 ma / -wire H HART -communication Intrinsic safety 4 0 ma / -wire I EPDM F 7 PVC-cable PUR-cable FEP-cable TPE-cable 4 P N bar 0. % P N < bar 0, % B Cable length in m Special version prepared for mounting with stainless steel pipe 5 0 flange version cable with integrated air tube for atmospheric pressure reference stainless steel pipe is not part of the supply HART is a registered trade mark of HART Communication Foundation This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice. Nominal pressure from cmh O up to mh O Output signals -wire: ma Special characteristics shipping approvals acc. to: Lloyd s Register (LR), Germanischer Lloyd (GL), Det Norske Veritas (DNV) China Classification Society (CCS), American Bureau of Shipping (ABS) diameter 9.5 mm HART communication (setting of offset, span and damping) high overpressure resistance high long-term stability Optional versions IS-version zone 0 diaphragm AI O 99.9 % different housing materials (stainless steel, CuNiFe) screw-in and flange version accessories e. g. assembling and probe flange, mounting clamp LMK 458H Probe with HART -communication for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: 0. % FSO The hydrostatic probe LMK 458H has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 85 C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458H is a capacitive ceramic sensor element, which offers a high overload resistance and medium compatibility. Preferred areas of use are Water Drinking water abstraction Desalinization plant Shipbuilding / Offshore Ballast tanks Draught monitoring Level measurement in ballast and storage tanks

10 LMK 458 H 8 9 LMK 458 H LMK 458H Hydrostatic Probe Pressure ranges Nominal pressure [bar] Level [mh O] Overpressure [bar] On request we adjust the devices by software on the required pressure ranges, within the turn-down possibility (starting at 0.0 bar). Output signal / Supply Standard -wire: ma / V S =... 6 V DC with HART communication V S rated = 4 V DC Option IS-version -wire: ma / V S = V DC with HART communication V S rated = 4 V DC Performance P N 60 mbar TD :5 ± 0. % FSO TD > :5 ± [ x TD] % FSO TD max = :0 P N < 60 mbar ± [ x TD] % FSO TD max = : P N bar TD :5 ± 0. % FSO TD > :5 ± [ x TD] % FSO TD max = : 0 Permissible load R max = [(V S - V S min) / 0.0 A] Ω load at HART -communication: R min = 50 Ω Long term stability ± (0. x turn-down) FSO / year at reference conditions Influence effects supply: 0.05 % FSO / 0 V permissible load: 0.05 % FSO / kω Turn-on time 850 msec Mean response time 40 msec without consideration of electronic damping mean measuring rate 7/sec Max. response time 80 msec Adjustability configuration of following parameters possible (interface / software necessary ): - electronic damping: sec - offset: % FSO - turn down of span: max. :0 accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) software, interface, and cable have to be ordered separately (software appropriate for Windows 95, 98, 000, NT Version 4.0 or higher, and XP) IS-protection Approval DX5A-LMK 458H Safety technical maximum values Permissible temperatures for environment Connecting cables (by factory) IBExU 0 ATEX 86 X zone 0 5 : II G Ex ia IIB T4 Ga zone 0: II D Ex ia IIIC T85 C Da U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 94,6 nf; L i = 0 µh; the supply connections have an inner capacity of max. 0 nf opposite the enclosure in zone 0: C with p atm 0.8 bar up to. bar zone and higher: C cable capacity: cable inductance: 5 for optional stainless steel pipe the following designation is valid: "II G Ex ia IIC T4" (zone 0) Wiring diagrams Pin configuration signal line/shield as well as signal line/signal line: 60 pf/m signal line/shield as well as signal line/signal line: µh/m -wire-system (current) HART cable colours (IEC 60575) p I supply + Dimensions (in mm) probe version V S Supply V S+ Supply V S Shield wh (white) bn (brown) gnye (green-yellow) Thermal effects (Offset and Span) / Permissible temperatures Tolerance band ± [0. x turn-down] % FSO TC, average ± [0.0 x turn-down] % FSO / 0 K in compensated range C Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection 4 Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to - EN 66 - Germanischer Lloyd (GL) - Det Norske Veritas (DNV) 4 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available Mechanical stability Vibration 4 g (according to GL: curve / according to DNV: Class B / basis: DIN EN ) Cable shielded cable with integrated air tube for atmospheric reference (for nominal pressure ranges absolute, the air tube is closed) Materials (media wetted) : stainless steel.4404 (6L) option: CuNi0FeMn (resistant against sea water) Cable sheath TPE -U (flame-resistant, halogen free, increased resistance against oil and gasoline, resistant against salt, sea water, heavy oil) ; F; EPDM : ceramics Al O 96 % option: ceramics Al O 99.9 % Nose cone POM Miscellaneous Cable protection stainless steel pipe for probe in stainless steel: available as compact product (: stainless steel pipe with a total length up to m possible; other lengths on request) Ingress protection IP 68 Current consumption max. ma min. 650 g (without cable) CE-conformity EMC Directive: 004/08/EC Category of the environment Lloyd s Register (LR) EMV, EMV, EMV, EMV4 number of certificate: /0056 Germanischer Lloyd (GL) D, EMC number of certificate: HH Det Norske Veritas (DNV) temperature: D humidity: B vibration: B electromagnetic compatibility: B number of certificate: A-44 stainless steel / CuNiFe HART is a registered trade mark of HART Communication Foundation; Windows is a registered trade mark of Microsoft Corporation Dimensions (in mm) screw-in version stainless steel / CuNiFe This document contains product specifications; properties are not guaranteed. Subject to change without notice. flange version prepared for mounting with stainless steel pipe stainless steel / CuNiFe

11 LMK 458 H 0 PROBES Pressure E 7 6 G consult 7 6 H 7 6 F in mh O Input [mh O] [bar] Design Output LMK 458H K 5 C H I EPDM F 7 P N bar 0. % P N < bar 0, % B Cable length in m nominal pressure ranges sealed gauge and absolute from bar mounting accessories are not part of supply and have to be ordered separately shielded cable with integrated air tube for atmospheric reference 4 stainless steel pipe is not part of the supply in bar, gauge in bar, sealed gauge in bar, absolute Stainless steel.4404 (6L) Copper-Nickel-alloy (CuNi0FeMn) Submersible transmitter Flange transmitter Screw-in transmitter Ceramics Al O 96% Ceramics Al O 99.9% HART -communication 4 0 ma / -wire HART -communication Intrinsic safety 4 0 ma / -wire TPE-U-cable Special version prepared for mounting with st. steel pipe HART is a registered trade mark of HART Communication Foundation, Nominal pressure from cmh O up to mh O Output signals -wire: ma Special characteristics diameter 9.5 mm cable and sensor section separable HART communication (setting of offset, span and damping) permissible temperatures up to 85 C high long-term stability Optional versions IS-version zone 0 cable protection via corrugated pipe diaphragm 99.9 % AI O LMK 58H Separable Stainless Steel Probe with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0. % FSO The separable stainless steel probe LMK 58H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Preferred areas of use are Water ground water level measurement rain spillway basin Sewage waste water treatment water recycling Fuel / Oil level monitoring in open tanks with low filling heights fuel storage tank farms biogas plants This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

12 LMK 58 H LMK 58 H LMK 58H Stainless Steel Probe Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] On request we adjust the devices by software on the required pressure ranges, within the turn-down-possibility (starting at 0.0 bar) Output signal / Supply Standard -wire: ma / V S =... 6 V DC with HART communication V S rated = 4 V DC Option IS-protection -wire: ma / V S =... 8 V DC with HART communication V S rated = 4 V DC Performance P N 60 mbar TD :5 ± 0. % FSO TD max = :0 TD > :5 ± [ x TD] % FSO P N < 60 mbar ± [ x TD] % FSO TD max = : P N bar TD :5 ± 0. % FSO TD max = :0 TD > :5 ± [ x TD] % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω load at HART -communication: R min = 50 Ω Long term stability ± (0. x turn-down) % FSO / year at reference conditions Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Turn-on time 850 msec Mean response time 40 msec without consideration of electronic damping measuring rate 7/sec Max. response time 80 msec Adjustability configuration of following parameters possible (interface / software necessary ) - electronic damping sec - offset: % FSO - turn-down of span: max. :0 accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) software, interface, and cable have to be ordered separately (software appropriate for Windows 95, 98, 000, NT Version 4.0 or higher, and XP) Thermal effects (Offset and Span) / - permissible temperatures Tolerance band ± (0. x turn-down) % FSO TC, average ± (0.0 x turn-down) % FSO / 0 K in compensated range C Permissible temperatures medium: C electronic / environment: C storage: C Electrical protection 4 Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 4 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Mechanical stability Vibration 4 g (according to: DIN EN ) Cable with sheath material 5 PVC (-5 70 C) grey PUR (-5 70 C) black FEP 6 (-5 70 C) black TPE (-5 85 C) blue 5 shielded cable with integrated air tube for atmospheric pressure reference 6 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) EPDM : ceramics Al O 96 % option: ceramics Al O 99.9 % Protection cap POM Explosion protection Approval DX5A-LMK 58H IBExU 0 ATEX 86 X zone 0 7 : II G Ex ia IIB T4 Ga zone 0: II D Ex ia IIIC T85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i =, nf, L i = 0 µh, the supply connections have an inner capacity of max. 7 nf opposite the enclosure Permissible media temperature in zone 0: C with p atm 0.8 bar up to. bar zone or higher: C Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance: signal line/shield also signal line/signal line: µh/m 7 for optional stainless steel pipe following designation is valid: "II G Ex ia IIC T4" (zone 0) Miscellaneous Option cable protection stainless steel pipe for probe in stainless steel: available as compact product (: stainless steel pipe with a total length up to m possible; other lengths on request) Current consumption max. ma approx. 650 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) HART p I supply + connector Pin configuration Binder series 7 8 (5-pin) cable colours (IEC 60575) 8 in separated version Dimensions (in mm) Supply + Supply wh (white) gn (brown) Shield 5 gnye (green-yellow) HART is a registered trade mark of HART Communication Foundation; Windows is a registered trade mark of Microsoft Corporation VS separated version optionally with corrugated pipe

13 LMK 58 H 4 5 PROBES LMK 58H Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Ceramics Al O 96% Ceramics Al O 99.9% C Output HART -communication 4 0 ma / -wire H HART -communication Intrinsic safety 4 0 ma / -wire I PVC-cable PUR-cable FEP-cable TPE-cable 4 P N bar 0. % P N < bar 0, % B Cable length in m Special version prepared for mounting with stainless steel pipe 0 6 cable protection with stainless steel corrugated pipe with pipe length in m 9 9 cable with integrated air tube for atmospheric pressure reference stainless steel pipe is not part of the supply EPDM HART is a registered trade mark of HART Communication Foundation Nominal pressure from 0... mh O up to mh O Output signals -wire: ma Special characteristics diameter 9 mm for cramped areas small thermal effect excellent long term stability excellent linearity Optional versions different kinds of cable specific versions e.g. special pressure ranges LMP 05 Slimline Probe Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO The slimline probe LMP 05 with silicon stainless steel sensor is designed for continous level measurement in confined space conditions. Permissible media are clean or waste water and thin fluids. A piezoresistiv stainless steel sensor with low thermal error, an excellent linearity and a long term stability, is basis of LMP 05. Preferred areas of use are Water level measurement in confined space conditions ground water monitoring depth or level measurement in wells and open waters drinking water system level measurement in container This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

14 LMP 05 LMP Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Output signal / Supply Standard -wire: ma / V S =... 6 V DC Performance : nominal pressure > 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.50 % FSO option: nominal pressure > 0.4 bar: ± 0.5 % FSO Permissible load R max = [(V S V S min) / 0,0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time < 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Pin configuration cable colours (IEC 60575) Supply + wh (white) Supply bn (brown) Dimensions (in mm) Shield gnye (green-yellow) Thermal effects (Offset and Span) Nominal pressure P N [bar] > Tolerance band [% FSO] ± ±.5 ± ± ± 0.75 TC, average [% FSO / 0 K] ± 0. ± 0. ± 0.4 ± 0. ± 0.07 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-0 70 C) black FEP 4 (-0 70 C) black cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) / EPDM stainless steel.445 (6L) Protection cap POM Cable sheath PVC / PUR / FEP Miscellaneous Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption signal output current: max. 5 ma approx. 00 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) Protection cap removable p supply + A VS I This document contains product specifications; properties are not guaranteed. Subject to change without notice.

15 LMP PROBES Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Stainless steel.445 (6L) Output 4 0 ma / -wire EPDM for P N > 0.4 bar 0.5 % for P N 0.4 bar 0.5 % 5 option for P N > 0.4 bar 0.5 % Cable length Special version LMP 05 PVC-cable PUR-cable FEP-cable cable with integrated air tube for atmospheric pressure reference in m Nominal pressure from 0... mh O up to mh O Output signals -wire: ma -wire: ma / V Special characteristics diameter 6,5 mm small thermal effect excellent accuracy excellent long term stability Optional versions IS-protection zone 0 SIL (Safety Integrity Level) cable protection via corrugated pipe different kinds of cables different kinds of seal materials LMP 07 Stainless Steel Probe Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % / 0. % FSO The stainless steel probe LMP 07 is designed for continuous level measurement in water and clean or waste fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Preferred areas of use are Water / filtrated sewage drinking water system ground water level measurement rain spillway basin pump and booster stations level measurement in container water treatment plants water recycling Fuel / Oil fuel storage tank farm This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

16 LMP 07 LMP 07 0 Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure > [bar] Wiring diagrams -wire-system (current) p supply + A -wire-system (current / voltage) p supply + VS Output signal / Supply VS Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Option Ex-protection -wire: ma / V S = V DC SIL-version: V S = 4 8 V DC Options -wire -wire: ma / V S = V DC V / V S = V DC Performance : nominal pressure < 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.5 % FSO option : nominal pressure 0.4 bar: ± 0.5 % FSO option : for all nominal pressures: ± 0. % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time -wire: < 0 msec; -wire: < msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) I Pin configuration cable colours (IEC 60575) Dimensions (in mm) Supply + Supply Signal + (only -wire) Shield I / U signal + wh (white) bn (brown) gn (green) gnye (green-yellow) option A/V Thermal effects (Offset and Span) Nominal pressure P N [bar] < 0.40 > 0.40 Tolerance band [% FSO] ± ± 0.75 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-0 70 C) black FEP 4 (-0 70 C) black cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) Protection cap stainless steel.4404 (6L) stainless steel.445 (6L) POM Explosion protection (only for ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9-LMP 07 zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing Ambient temperature range in zone 0: C with p atm 0.8 bar up to. bar in zone or higher: C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Miscellaneous Option SIL 5 application according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma / signal output voltage: max. 7 ma approx. 00 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC ATEX Directive 94/9/EG 5 not in combination with the accuracy 0.%, only for 4...0mA / -wire Total length of devices with accuracy 0. % FSO IEC increases by 5 mm! cable protection with corrugated pipe

17 LMP 07 PROBES LMP Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Stainless steel.445 (6L) Output 4 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire E S ES for P N 0.4 bar 0.5 % for P N < 0.4 bar 0.5 % 5 option for P N 0.4 bar 0.5 % option 0. % PVC-cable PUR-cable FEP-cable Cable length in m : m PVC 0 0 : 5 m PVC : 0 m PVC 0 0 : 5 m PVC 0 5 : 0 m PVC 0 0 special length PVC : m PUR 0 0 : 5 m PUR : 0 m PUR 0 0 : 5 m PUR 0 5 : 0 m PUR 0 0 special length PUR : 5 m FEP : 0 m FEP 0 0 special length FEP Special version cable protection with stainless steel corrugated pipe with pipe length in m Nominal pressure / nominal temperature from 0... mh O up to mh O from C up to C Output signals -wire: ma (pressure) -wire: ma (temperature) Special characteristics diameter 6,5 mm separate output signals for pressure and temperature ranges easy handling low maintenance and wiring costs Optional versions different kinds of cables different kinds of seal materials specific versions LMP 07T Level and Temperature Transmitter Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO BD SENSORS has developed the stainless steel submersible probe LMP 07T for continuous level and temperature measurement in water and in clean to lightly-soiled liquids. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 0 ma analogue signal in -wire technology is provided. Typical application areas are, for example, drinking water purification, monitoring of rainwater overflow basins and river courses, in addition to level measurement in containers or tank batteries. Preferred areas of use are Water / filtrated sewage e.g. drinking water system water recycling Fuel / Oil e.g. tank farm not in combination with SIL cable with integrated air tube for atmospheric pressure reference Standard lengths / 5 / 0 / 5 / 0 m are available from stock, special lengths are manufactured order-related, price per meter (see above). This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

18 LMP 07 T LMP 07 T 4 5 Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure > [bar] Input temperature range Temperature measuring range 0 0 C 0 50 C 0 70 C min. temperature range: 0 C; max. temperature range: 80 C min. temperature: -0 C; max. temperature: 70 C Output signal / Supply -wire (pressure) ma / V S = V DC -wire (temperature) ma / V S = V DC the circuits are galvanically isolated from each other Performance (pressure) : nominal pressure < 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.5 % FSO option : nominal pressure 0,4 bar: ± 0,5 % FSO (temperature) 4 ± C Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time < 0 ms (for output signal -wire (pressure)) accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) 4 Pt 00 class B; compensation time up to h depending on constant temperature and environmental respectively mass conditions Wiring diagram x-wire-system (current) Pin configuration cable colours (IEC 60575) Dimensions (in mm) Supply P+ Supply P Supply T+ Supply T Shield p T I I supply P+ supply P- supply T+ supply T- A A VS VS + + wh (white) bn (brown) gy (gray) pk (pink) gnye (green-yellow) Thermal effects (Offset and Span) Nominal pressure P N [bar] < 0.40 > 0.40 Tolerance band [% FSO] ± ± 0.75 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection 5 Short-circuit protection Reverse polarity protection permanent no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 5 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material 6 PVC (-5 70 C) grey PUR (-0 70 C) black FEP 7 (-0 70 C) black 6 cable with integrated air tube for atmospheric pressure reference 7 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) Protection cap Cable sheath Miscellaneous Connecting cables (by factory) stainless steel.4404 (6L) stainless steel.445 (6L) POM PVC, PUR, FEP cable capacitance: cable inductance: signal line/shield also signal line/signal line: 60 pf/m signal line/shield also signal line/signal line: µh/m Current consumption signal output current: max. 5 ma / signal output voltage: max. 7 ma Ingress protection IP 68 CE-conformity approx. 00 g (without cable) EMC Directive: 004/08/EC

19 LMP 07 T 6 7 PROBES Pressure in bar in mh O Input [mh O] [bar] Input temperature C x x x Stainless steel.4404 (6L) Stainless steel.445 (6L) Output pressure 4 0 ma / -wire Output temperature 4 0 ma / -wire for P N 0.4 bar 0.5 % for P N < 0.4 bar 0.5 % 5 option for P N 0.4 bar 0.5 % 9 PVC-cable PUR-cable FEP-cable Cable length Special version LMP 07T in m : m PVC 0 0 : 5 m PVC : 0 m PVC 0 0 : 5 m PVC 0 5 : 0 m PVC 0 0 special length PVC : m PUR 0 0 : 5 m PUR : 0 m PUR 0 0 : 5 m PUR 0 5 : 0 m PUR 0 0 special length PUR : 5 m FEP : 0 m FEP 0 0 special length FEP cable with integrated air tube for atmospheric pressure reference Standard lengths / 5 / 0 / 5 / 0 m are available from stock, special lengths are manufactured order-related, price per meter (see above) Nominal pressure from 0... mh O up to mh O Output signals -wire: ma Special characteristics diameter 5 mm cable and sensor section separable excellent accuracy excellent long term stability Optional versions IS-version zone 0 SIL (Safety Integrity Level) cable protection via corrugated pipe mounting accessories as cable gland and terminal clamp of stainless steel different kinds of cables different kinds of seal materials LMP 08 Separable Stainless Steel Probe Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO / 0. % FSO The separable stainless steel probe LMP 08 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Preferred areas of use are Water / filtrated sewage ground water level measurement level measurement in wells and open waters rain spillway basin level measurement in container water treatment plants water recycling This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

20 LMP LMP 08 LMP 08 Stainless Steel Probe Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Wiring diagram -wire-system (current) p supply + connector Output signal / Supply Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Option IS-protection -wire: ma / V S = V DC SIL-version: V S = 4 8 V DC Performance : nominal pressure < 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.5 % FSO option : nominal pressure 0.4 bar: ± 0.5 % FSO option : for all nominal pressures: ± 0. % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time < 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Nominal pressure P N [bar] < Tolerance band [% FSO] ± ± 0.75 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-0 70 C) black FEP 4 (-0 70 C) black cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) EPDM stainless steel.445 (6L) Protection cap POM Explosion protection Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9-LMP 08 zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0nF, L i 0µH, the supply connections have an inner capacity of max. 7 nf to the housing Ambient temperature range in zone 0: C with p atm 0.8 bar up to. bar in zone or higher: C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Miscellaneous Option SIL 5 application according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma approx. 50 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC ATEX Directive 94/9/EG 5 not in combination with the accuracy 0.% I Pin configuration Binder series 7 6 (5-pin) cable colours (IEC 60575) 6 in separated version Dimensions (in mm) Supply + Supply VS wh (white) bn (brown) Shield 5 gnye (green-yellow) separated version Total length of devices with accuracy 0. % FSO IEC increases by 6 mm! (, Ex-protection and SIL-version) option version with corrugated pipe

21 LMP PROBES Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Output for P N 0.4 bar for P N < 0.4 bar option for P N 0.4 bar option Cable length Version cable with integrated air tube for atmospheric pressure reference not in combination with SIL LMP ma / -wire Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire prepared for mounting with stainless steel pipe cable protection with stainless steel corrugated pipe with pipe length in m stainless steel pipe is not part of the supply Stainless steel.445 (6L) EPDM PVC-cable PUR-cable FEP-cable E S ES 0.5 % 0.5 % % 0. % in m consult Nominal pressure from mh O up to mh O Output signals -wire: ma Special characteristics diameter 7 mm suitable for hydrostatic level measurement e.g. /4" pipes excellent linearity excellent long term stability Optional versions different cable materials specific versions e.g. special pressure ranges LMK 06 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO The slimline probe LMK 06 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Preferred areas of use are Water level measurement at confined space conditions ground water monitoring depth or level measurement in wells drinking water abstraction level measurement in open tanks This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

22 LMK 06 LMK Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Output signal / Supply Standard -wire: ma / V S =... 6 V DC Performance ± 0.5 % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Response time 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) / Permissible temperatures Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic protection emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-0 70 C) black FEP 4 (-0 70 C) black shielded cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) ceramics Al O 96 % Protection cap POM Miscellaneous Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption max. 5 ma approx. 00 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) p I supply + Pin configuration cable colours (IEC 60575) Supply + Supply Shield V S wh (white) bn (brown) gnye (green-yellow) Dimensions (in mm) Accessories Terminal clamp Suitable for all probes with cable mm Material : steel, zinc plated optionally: stainless steel.40 (04) approx. 60 g Ordering type Terminal clamp, steel, zinc plated Terminal clamp, stainless steel.40 (04) protection cap removable Z0058 Z BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. This document contains product specifications; properties are not guaranteed. Subject to change without notice. LMK06_E_05

23 LMK PROBES LMK Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Ceramics Al O 96% Output 4 0 ma / -wire Cable length Special version LMK 06 cable with integrated air tube for atmospheric pressure reference 0.5 % 5 PVC-cable PUR-cable FEP-cable in m Nominal pressure from mh O up to mh O Output signals -wire: ma -wire: ma / V Special characteristics diameter 7 mm good linearity good long term stability easy handling Optional versions IS-protection SIL (Safety Integrity Level) according to IEC 6508 / IEC 65 different kinds of cables and elastomeres specific versions e. g. special pressure ranges 07 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO The level transmitter LMK 07 is designed for continuous level measurement in water or waste water applications. Basic element is a flush mounted ceramic sensor. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer matierals can be offered according to the -specific operating conditions. Preferred areas of use are Water drinking water system ground water monitoring storm water systems Sewage waste water treatment water recycling dumpsite Fuel / Oil fuel storage tank farm biogas plants This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

24 LMK 07 LMK Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Wiring diagrams -wire-system (current) p supply + A -wire-system (current / voltage) p supply + V S Output signal / Supply Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Option IS-protection -wire: ma / V S = V DC SIL-version: V S = 4 8 V DC Options -wire -wire: ma / V S = V DC V / V S = V DC Performance ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 k Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Response time 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) I Pin configuration cable colours (IEC 60575) Shield Dimensions (in mm) Supply + Supply Signal + (only -wire) V S wh (white) bn (brown) gn (green) gnye (green-yellow) I/U signal + A/V Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic protection emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-0 70 C) black FEP 4 (-0 70 C) black shielded cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) EPDM ceramics Al O 96 % Protection cap POM Explosion protection (only for 4 0 ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9-LMK 07 zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0nF, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing protection cap removable Ambient temperature range Connecting cables (by factory) in zone 0: C with p atm 0.8 bar up to. bar in zone : C cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance: signal line/shield also signal line/signal line: µh/m Miscellaneous Option SIL 5 application according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma approx. 50 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC ATEX Directive 94/9/EG 5 only for 4...0mA / -wire This document contains product specifications; properties are not guaranteed. Subject to change without notice.

25 48 LMK 07 PROBES Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Ceramics Al O 96% Output 4 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire E S ES EPDM 0.5 % 5 PVC-cable PUR-cable FEP-cable Cable length in m : m PVC 0 0 : 5 m PVC : 0 m PVC 0 0 : 5 m PVC 0 5 : 0 m PVC 0 0 special length PVC Special version LMK 07 : m PUR 0 0 : 5 m PUR : 0 m PUR 0 0 : 5 m PUR 0 5 : 0 m PUR 0 0 special length PUR : 5 m FEP : 0 m FEP 0 0 special length FEP cable with integrated air tube for atmospheric pressure reference Standard lengths / 5 / 0 / 5 / 0 m are available from stock, special lengths are manufactured order-related, price per meter (see above) Nominal pressure / nominal temperature from mh O up to mh O from C up to C Output signals -wire: ma (pressure) -wire: ma (temperature) Special characteristics diameter 6,5 mm separate output signals for pressure and temperature ranges good lang term stability easy handling low maintenance and wiring costs Optional versions different kinds of cables different kinds of seal materials specific versions LMK 07T Level and Temperature Transmitter Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO BD SENSORS has developed the stainless steel submersible probe LMK 07T with flush mounted ceramic sensor for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 0 ma analogue signal in -wire technology is provided. Preferred areas of use are Water e.g. drinking water system, RÜBs ground water monitoring storm water systems Sewage waste water treatment, water recycling, dumpsite, waste water tanks Fuel / Oil fuel storage tank farm, biogas plants This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

26 50 LMK 07T LMK 07T 5 Input pressure range Nominal pressure gauge [bar] 0,4 0,6,6, Level [mh O] Overpressure [bar] Burst pressure > [bar] Input temperature range Temperature measuring range 0 0 C 0 50 C 0 70 C min. temperature range: 0 C; max. temperature range: 80 C min. temperature: -0 C; max. temperature: 70 C Output signal / Supply -wire (pressure) ma / V S = V DC -wire (temperature) ma / V S = V DC the circuits are galvanically isolated from each other Performance (pressure) ± 0.5 % FSO (temperature) 4 ± C Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time < 0 ms (for output signal -wire (pressure)) accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) 4 Pt 00 class B; compensation time up to h depending on constant temperature and environmental respectively mass conditions Wiring diagram x-wire-system (current) Pin configuration cable colours (IEC 60575) Dimensions (in mm) Supply P+ Supply P Supply T+ Supply T Shield p T I I supply P+ supply P- supply T+ supply T- A A VS VS + + wh (white) bn (brown) gy (gray) pk (pink) gnye (green-yellow) Thermal effects (Offset and Span) Thermal error Permissible temperatures ± 0. % FSO / 0 K in compensated range C Permissible temperatures medium: C storage: C Electrical protection 5 Short-circuit protection Reverse polarity protection permanent no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 5 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material 6 PVC (-5 70 C) grey PUR (-0 70 C) black FEP 7 (-0 70 C) black 6 cable with integrated air tube for atmospheric pressure reference 7 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) EPDM ceramics Al O 96% Protection cap Cable sheath Miscellaneous Connecting cables (by factory) Current consumption POM Ingress protection IP 68 CE-conformity PVC, PUR, FEP cable capacitance: cable inductance: max. 5 ma approx. 50 g (without cable) EMC Directive: 004/08/EC signal line/shield also signal line/signal line: 60 pf/m signal line/shield also signal line/signal line: µh/m This document contains product specifications; properties are not guaranteed. Subject to change without notice.

27 LMK 07T 5 5 PROBES Pressure in bar in mh O 8 A 8 B Input [mh O] [bar] Input temperature C x x x Stainless steel.4404 (6L) Ceramic Al O 96 % Output pressure 4 0 ma / -wire Output temperature 4 0 ma / -wire EPDM Cable length Special version LMK 07T % 5 9 PVC-cable PUR-cable FEP-cable in m : m PVC 0 0 : 5 m PVC : 0 m PVC 0 0 : 5 m PVC 0 5 : 0 m PVC 0 0 special length PVC : m PUR 0 0 : 5 m PUR : 0 m PUR 0 0 : 5 m PUR 0 5 : 0 m PUR 0 0 special length PUR : 5 m FEP : 0 m FEP 0 0 special length FEP cable with integrated air tube for atmospheric pressure reference Standard lengths / 5 / 0 / 5 / 0 m are available from stock, special lengths are manufactured order-related, price per meter (see above) Nominal pressure from cmh O up to mh O Output signals -wire: ma -wire: 0 0 V Special characteristics diameter 9.5 mm especially for sewage, viscous and pasty media Optional versions IS-protection zone 0 mounting with stainless steel pipe flange version diaphragm 99.9 % AI O different kinds of cables different kinds of elastomers LMK 8 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO The stainless steel probe LMK 8 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Preferred areas of use are Water drinking water abstraction Sewage waste water treatment water recycling Fuel / Oil level monitoring in open tanks with low filling heights fuel storage tank farms / biogas plants This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

28 LMK LMK 8 LMK 8 Stainless Steel Probe Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Output signal / Supply Standard Option IS-protection -wire: ma / V S = 9... V DC -wire: ma / V S = V DC Option -wire -wire: V / V S =.5... V DC Performance Permissible load Influence effects : ± 0.5 % FSO option: ± 0.5 % FSO R max = [(V S V S min) / 0.0 A] Ω supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω ± 0. % FSO / year at reference conditions 700 msec Long term stability Turn-on time Mean response time < 00 msec measuring rate 5/sec Max. response time 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request (only for 4 0 ma / -wire) Cable with sheath material PVC (-5 70 C) grey PUR (-5 70 C) black FEP 4 (-5 70 C) black TPE (-5 5 C) blue shielded cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6 L) F EPDM : ceramics Al O 96 % Option: ceramics Al O 99.9 % Nose cone POM Explosion protection Approval DX4-LMK 8 IBExU05ATEX070 X zone 0 5 : II G Ex ia IIB T4 Ga zone 0: II D Ex ia IIIC T85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 7 nf, L i = 5 µh Permissible media temperature in zone 0: C with p atm 0.8 bar up to. bar zone and higher: C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m 5 for optional stainless steel pipe following designation is valid: "II G Ex ia IIC T4 Ga" (zone 0) Miscellaneous Current consumption max. ma approx. 400 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) p I supply + A Pin configuration cable colours (IEC 60575) Supply + wh (white) Supply bn (brown) Signal + (only for -wire) gn (green) Shield gnye (green-yellow) Dimensions (in mm) LMK 8 LMK 8 with thread R" for stainless steel pipe VS -wire-system (voltage) p U supply + signal + LMK 8 flange version dimensions in mm dimensions DN5 / PN40 DN40/ PN40 DN50 / PN40 DN80 / PN6 D k d b f n d V VS

29 LMK PROBES Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Output 4 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire E 9 EPDM F 7 9 PVC-cable PUR-cable FEP-cable TPE-cable % option 0.5 % 9 Cable length in m : m PVC 0 0 : 5 m PVC : 0 m PVC 0 0 : 5 m PVC 0 5 : 0 m PVC 0 0 special length PVC Special version LMK 8 Ceramics Al O 96% Ceramics Al O 99.9% : m PUR 0 0 : 5 m PUR : 0 m PUR 0 0 : 5 m PUR 0 5 : 0 m PUR 0 0 special length PUR : 5 m FEP : 0 m FEP 0 0 special length FEP special length TPE prepared for mounting with stainless steel pipe flange version 9 C consult consult consult consult consult consult consult consult Nominal pressure from 0... mh O up to mh O Output signals -wire: ma -wire: V Special characteristics diameter mm diaphragm ceramics 96% Al O good long-term stability especially for waste water, Optional versions diaphragm ceramics 99,9% Al O IS-version Ex ia = intrinsically safe for gases and dust mounting with stainless steel tube different kinds of cable different kinds of elastomer LMK 87 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO The stainless steel probe LMK 87 was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the front-flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. Compared to the level probe LMK 8 the outside-diameter is only mm, which allows an easy installation and backfitting in tubes or in cramped fitting conditions. An IS-version is also available. Preferred areas of use Water Groundwater and level monitoring Sewage waste water treatment water recycling Fuel and oil Tank battery Biogas plants cable with integrated air tube for atmospheric pressure reference stainless steel pipe is not part of the supply This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

30 LMK LMK 87 LMK 87 Hydrostatic probe Technical data Input pressure range Nominal pressure gauge [bar] 0, 0,6 0,5 0,4 0,6,6, Level [mh O],6, Overpressure [bar] Berst pressure [bar] Permissible vacuum [bar] Output signal / Supply Standard Option IS-version Option -wire: ma / V S =... 6 V DC -wire: ma / V S = V DC -wire: 0 0 V / V S = V DC Performance : ± 0.5 % FSO option: ± 0.5 % FSO Permissible load -wire: R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability Turn-on time Mean response time ± 0. % FSO / year 450 msec 70 msec Measuring rate 80 Hz accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Tolerance band [% FSO].0% FSO in compensated range C Permissible temperatures Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable outlet shielded cable with integrated air tube for atmospheric reference (for nominal pressure ranges absolute, the air tube is closed) Materials (media wetted) : stainless steel.4404 (6 L) Cable PVC (-5 70 C) gray PUR (-5 70 C) black FEP (-5 70 C) black TPE (-5 5 C) blue (O-rings) : option: EPDM; F (min. permissible temperature from -5 C) : ceramics Al O 96% option: ceramics Al O 99,9% Protection cap POM do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected IS-protection Approval DX4B-LMK 87 IBExU 5 ATEX 066 X zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T5 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 49, nf; L i = 0 µh; the supply connections have an inner capacity of max. 00 nf opposite the enclosure Permissible temperatures for in zone 0: C with p atm 0.8 bar up to. bar environment zone and higher: C Connecting cables cable capacity: signal line/shield as well as signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield as well as signal line/signal line: µh/m Miscellaneous Current consumption max. ma approx. 80 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Pin configuration cable colours (IEC 60575) Supply + Supply signal + (only -wire) wh (white) bn (brown) gn (green) Shield gnye (green-yellow) Wiring diagrams -wire-system (current) p I Dimensions (in mm) Supply + Supply option: screw-in version -wire-system (voltage) with protection cap without protection cap with thread R/ for mounting with stainless steel tube G/4 A V S p U Supply + Supply Supply + V V S G/ open

31 LMK 87 PROBES Pressure gauge in bar absolute in bar consult gauge in mh O 6 Input [mh O] [bar] LMK 87 Stainless steel.4404 (6L) Design probe screw-in version G/" open screw-in version G/4" flush A B Ceramics Al O 96% Ceramics Al O 99.9% C Output 4 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire E EPDM F 7 consult PVC-cable PUR-cable FEP-cable TPE-cable % FSO option 0.5 % FSO Cable length in m Special version prepared for mounting with st. steel pipe min. permissible temperature from -5 C cable with integrated air tube for atmospheric pressure reference stainless steel pipe is not part of the supply Nominal pressure from cmh O up to mh O Output signals -wire: ma Special characteristics diameter 9.5 mm LR-certificate (Lloyd s Register) GL-certificate (Germanischer Lloyd) DVN-certificate (Det Norske Veritas) ABS-certificate (American Bureau of Shipping) CCS-certificate (China Classification Society) high overpressure resistance high long-term stability Optional versions diaphragm Al O 99.9 % different housing materials (stainless steel, CuNiFe) IS-version zone 0 screw-in and flange version accessories e.g. assembling and probe flange, mounting clamp LMK 458 Probe For Marine And Offshore Ceramic Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0. % FSO The hydrostatic probe LMK 458 has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 5 C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458 is a capacitive ceramic sensor element designed by BD SENSORS, which offers a high overload resistance and medium compatibility. Preferred areas of use are Water drinking water abstraction desalinization plant Shipbuilding / Offshore ballast tanks monitoring of a ship s position and draught level measurement in ballast and storage tanks This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

32 LMK LMK 458 LMK 458 Hydrostatic Probe Pressure ranges Nominal pressure [bar] Level [mh O] Overpressure [bar] Permissible vacuum [bar] available in gauge and absolute; nominal pressure ranges absolute from bar Output signal / Supply Standard -wire: ma / V S = 9... V DC V S rated = 4 V DC Option IS-version -wire: ma / V S = V DC V S rated = 4 V DC Performance : ± 0.5 % FSO option: for P N 0.6 bar : ± 0. % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Long term stability ± 0. % FSO / year at reference conditions Influence effects supply: 0.05 % FSO / 0 V permissible load: 0.05 % FSO / kω Turn-on time 700 msec Mean response time < 00 msec mean measuring rate 5/sec Max. response time 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Under the influence of disturbance burst according to EN (004) + kv accuracy decreased to ± 0.5 % FSO. Thermal effects / Permissible temperatures Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures medium / electronics / environment: C storage: C Electrical protection 4 Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to - EN 66 - Germanischer Lloyd (GL) - Det Norske Veritas (DNV) 4 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available Mechanical stability Vibration 4 g (according to GL: curve / according to DNV: Class B / basis: DIN EN ) Cable outlet shielded cable with integrated air tube for atmospheric reference (for nominal pressure ranges sealed gauge and absolute, the air tube is plugged) Materials : stainless steel.4404 (6L) option: CuNi0FeMn (resistant against sea water) (media wetted) : options: EPDM, F (min. permissible temperature from -5 C) : ceramics Al O 96 % option: ceramics Al O 99.9 % Cable sheath TPE -U (flame-resistant, halogen free, increased resistance against oil and gasoline, resistant against salt, sea water, heavy oil) Miscellaneous Optionally cable protection stainless steel pipe for probe in stainless steel: available as compact product (: stainless steel pipe with a total length up to m possible; other lengths on request) Ingress protection IP 68 Current consumption max. ma min. 650 g (without cable) CE-conformity EMC Directive: 004/08/EC Option Pt 00 temperature element 5 Temperature range C Connection temperature element -wire Resistance 00 Ω at 0 C Temperature coefficient 850 ppm/k Supply I S ma DC Category of the environment Lloyd s Register (LR) EMV, EMV, EMV, EMV4 number of certificate: /0055 Germanischer Lloyd (GL) D, EMC number of certificate: HH Det Norske Veritas (DNV) temperature: D humidity: B vibration: B electromagnetic compatibility: B number of certificate: A-44 IS-protection Approval DX4A-LMK 458 IBExU 07 ATEX 80 X zone 0: II G Ex ia IIB T4 Ga Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 05 nf; L i = 5 µh; the supply connections have an inner capacity of max. 40 nf opposite the enclosure Permissible temp.for environment in zone 0 6 : C with p atm 0.8 bar up to. bar zone and higher: C Connecting cables cable capacity: signal line/shield as well as signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield as well as signal line/signal line: µh/m 5 only for 4...0mA, cable lenght max. 5m 6 for optional stainless steel pipe the following designation is valid: "II G Ex ia IIC T4" (zone 0) Wiring diagrams -wire-system (current) -wire-system (current) with Pt 00 Pin configuration cable colours (IEC 60575) Supply V S+ Supply V S Option Pt 00 temperature element: Supply T+ (with Pt 00) Supply T (with Pt 00) Supply T (with Pt 00) Shield Dimensions (in mm) probe versions stainless steel / CuNiFe flange version prepared for mounting with stainless steel pipe stainless steel / CuNiFe P stainless steel / CuNiFe I supply VS+ supply VS supply T+ supply T supply T wh (white) bn (brown) ye (yellow) gy (grey) pk (pink) gnye (green-yellow) screw-in version stainless steel / CuNiFe VS option Pt 00 temperature 05 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.

33 LMK PROBES LMK Pressure in bar, gauge in bar, absolute in mh O Input [mh O] [bar] Stainless steel.4404 (6L) Copper-Nickel-alloy (CuNi0FeMn) K Design Probe Flange version Screw-in version 5 Ceramics Al O 96% Ceramics Al O 99.9% C Output 4 0 ma / -wire Intrinsic safety 4 0 ma / -wire E EPDM F 7 4 TPE-U-cable % option für P N 0.6 bar: 0. % Cable length in m Special version with temperature sensor Pt 00 0 prepared for mounting with st. steel pipe nominal pressure ranges absolute from bar mounting accessories are not part of supply and have to be ordered separately min. permissible temperature from -5 C 4 shielded cable with integrated air tube for atmospheric reference 4 stainless steel pipe is not part of the supply Nominal pressure from cmh O up to mh O Output signals -wire: ma -wire: 0 0 V Special characteristics cable and probe separable diameter 9.5 mm especially for sewage, viscous and pasty media Optional versions IS-protection zone 0 cable protection via corrugated pipe diaphragm 99.9 % AI O different kinds of cable different kinds of elastomers LMK 58 Separable Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO The separable stainless steel probe LMK 58 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Preferred areas of use are Water ground water level measurement rain spillway basin Sewage waste water treatment water recycling Fuel / Oil level monitoring in open tanks with low filling heights fuel storage tank farms / biogas plants This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

34 LMK LMK 58 LMK 58 Stainless Steel Probe Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Output signal / Supply Standard -wire: ma / V S = 9... V DC Option IS-protection -wire: ma / V S = V DC Option -wire -wire: V / V S =.5... V DC Performance : ± 0.5 % FSO option: ± 0.5 % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Turn-on time 700 msec Mean response time < 00 msec measuring rate 5/sec Max. response time 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Wiring diagram -wire-system (current) -wire-system (voltage) connector p I supply + Pin configuration 6 in separated version Dimensions (in mm) V S Supply + Supply Signal + (only for -wire) p U supply + signal + Binder series 7 6 (5-pin) - wire - wire 4 - Shield 5 5 V VS cable colours (IEC 60575) wh (white) bn (brown) gn (green) gnye (green-yellow) Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C electronic / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 70 C) grey PUR (-5 70 C) black FEP 4 (-5 70 C) black TPE (-5 5 C) blue shielded cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) stainless steel.4404 (6L) EPDM : ceramics Al O 96 % option: ceramics Al O 99.9 % Nose cone POM Explosion protection (only for ma / -wire) Approval DX4-LMK 58 IBExU05ATEX070 X Zone 0 5 : II G Ex ia IIB T4 Ga Zone 0: II D Ex ia IIIC T85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 7 nf, L i = 5 µh Permissible temperature C Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 00 pf/m cable inductance: signal line/shield also signal line/signal line: µh/m 5 for optional stainless steel pipe following designation is valid: "II G Ex ia IIC T4 Ga" (zone 0) : optional: Miscellaneous Current consumption max. ma approx. 650 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC separated version with corrugated pipe

35 LMK PROBES Pressure in bar in mh O Input [mh O] [bar] Stainless steel.4404 (6L) LMK 58 C Output 4 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire E EPDM PVC-cable PUR-cable FEP-cable TPE-cable % option 0.5 % Cable length in m Special version prepared for mounting with stainless steel pipe 0 6 consult cable protection with stainless steel corrugated pipe with pipe length in m 9 9 cable with integrated air tube for atmospheric pressure reference stainless steel pipe is not part of the supply Ceramics Al O 96% Ceramics Al O 99.9% Nominal pressure from 0... mh O up to mh O Output signals -wire: ma -wire: ma / V Special characteristics diameter 5 mm cable and sensor section separable excellent linearity small thermal effect Optional versions SIL (Safety Integrity Level) according to IEC 6508 / 65 mounting accessories as screw fitting and terminal clamp of stainless steel different kinds of cables and elastomers specific versions e. g. special pressure ranges LMP 808 Separable Plastic Probe Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily. Preferred areas of use are Water / filtrated sewage ground water level measurement storm water systems drinking water system water treatment plants Fuel / Oil fuel storage tank farm biogas plants process water recycling This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

36 LMP LMP 808 LMP 808 Plastic Probe Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Output signal / Supply Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Options -wire -wire: ma / V S = V DC V / V S = V DC Performance : nominal pressure < 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.5 % FSO option : nominal pressure 0.4 bar: ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time < 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Nominal pressure P N [bar] < Tolerance band [% FSO] ± ± 0.75 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (0 50 C) grey PUR (0 50 C) black FEP 4 (0 50 C) black Cable protection : without cable protection optional: prepared for mounting of a PVC pipe with diameter 5 mm cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) PVC grey EPDM stainless steel.445 (6L) Protection cap POM Miscellaneous Option SIL 5 application according to IEC 6508 / IEC 65 Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma approx. 400 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC 5 only for 4...0mA / -wire Wiring diagrams -wire-system (current) -wire-system (current / voltage) connector p supply + I Pin configuration Binder serie 7 6 (5-pin) cable colours (IEC 60575) Supply + Supply (only -wire) Supply (only -wire) Signal + (only -wire) 4 wh (white) bn (brown) bn (brown) gn (green) Shield 5 gnye (green-yellow) 6 in separated version Dimensions (in mm) VS p I/U supply + signal + option version separate version cable protection with PVC pipe without cable protection A/V V S 04 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. This document contains product specifications; properties are not guaranteed. Subject to change without notice. LMP808_E_05

37 LMP PROBES LMP Pressure in bar in mh O Input [mh O] [bar] PVC Stainless steel.445 (6L) Output 4 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire SIL 4 0 ma / -wire EPDM PVC-cable PUR-cable FEP-cable for P N 0.4 bar 0.5 % for P N < 0.4 bar 0.5 % 5 option for P N 0.4 bar 0.5 % cable with integrated air tube for atmospheric pressure reference PVC pipe is not part of the supply A S Cable length in m Special version prepared for mounting with PVC pipe Nominal pressure from mh O up to mh O Output signals -wire: ma Special characteristics diameter mm suitable for hydrostatic level measurement e.g. /4" pipes excellent linearity excellent long term stability Optional versions different cable materials specific versions e.g. special pressure ranges LMK 806 Plastic Probe for Aggressive Media Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO The LMK 806 with ceramic sensor and diameter from only mm has been especially designed for the continuous level measurement at confined space conditions. Permissible media are waste water and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and elastomer materials are available in order to achieve maximum media compatibility. Preferred areas of use are Sewage waste water treatment water recycling dumpsite Aggressive media level measurement in most of acids and lyes This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

38 LMK 806 LMK Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Output signal / Supply -wire ma / V S =... V DC Performance ± 0.5 % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Response time 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) / Permissible temperatures Thermal error ± 0.4 % FSO / 0 K in compensated range C Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic protection emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 50 C) grey PUR (-0 50 C) black FEP 4 (-0 50 C) black shielded cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) PVC ceramics Al O 96 % Protection cap POM Miscellaneous Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption max. 5 ma approx. 00 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) p I supply + Pin configuration cable colours (IEC 60575) Supply + Supply Shield V S wh (white) bn (brown) gnye (green-yellow) Dimensions (in mm) Accessories Terminal clamp Suitable for all probes with cable mm Material : steel, zinc plated optionally: stainless steel.40 (04) approx. 60 g Ordering type Terminal clamp, steel, zinc plated Terminal clamp, stainless steel.40 (04) Z0058 Z BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. This document contains product specifications; properties are not guaranteed. Subject to change without notice.

39 LMK 806 PROBES Pressure in bar in mh O Input [mh O] [bar] PVC A Ceramics Al O 96% Output 4 0 ma / -wire Cable length Special version LMK % 5 PVC-cable PUR-cable FEP-cable cable with integrated air tube for atmospheric pressure reference in m Nominal pressure from mh O up to mh O Output signals -wire: ma Special characteristics diameter 5 mm excellent long term stability easy handling Optional versions SIL (Safety Integrity Level) according to IEC 6508 / IEC 65 different kinds of cables and elastomers specific version e. g. special pressure ranges LMK 807 Plastic Probe for Aggressive Media Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO The plastic submersible probe LMK 807 is designed for continous level measurement for waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and elastomer materials are available in order to achieve maximum media compatibility. Preferred areas of use are Sewage waste water treatment water recycling dumpsite Aggressive media level measurement in most of acids and lyes This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

40 LMK 807 LMK Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Dimensions (in mm) Output signal / Supply Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Performance ± 0.5 % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time < 0 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (0 50 C) grey PUR (0 50 C) black FEP 4 (0 50 C) black cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) PVC grey / EPDM / F ceramics Al O 96 % Miscellaneous Option SIL application according to IEC 6508 / IEC 65 Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption max. 5 ma approx. 00 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) p supply + VS I Pin configuration cable colours (IEC 60575) Supply + Supply Shield wh (white) bn (brown) gnye (green-yellow) This document contains product specifications; properties are not guaranteed. Subject to change without notice.

41 LMK PROBES LMK Pressure in bar in mh O Input [mh O] [bar] PVC A Output Cable length Special version LMK 807 Ceramics Al O 96% 4 0 ma / -wire SIL 4 0 ma / -wire EPDM F 0.5 % PVC-cable PUR-cable FEP-cable cable with integrated air tube for atmospheric pressure reference in m S Nominal pressure from mh O up to mh O Output signals -wire: ma -wire: V Special characteristics diameter 45 mm chemical resistance high overpressure resistance especially for tank level measurement of viscous and aggressive media diaphragm 99.9 % AI O housing material PP or PVDF Optional versions 809 Plastic Probe For Aggressive Media High Purity Ceramic Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum media compatibility. Preferred areas of use are Sewage waste water treatment water recycling dumpsite Aggressive media level measurement in most of acids and lyes different kinds of cable and seal materials prepared for mounting with pipe This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

42 LMK 809 LMK Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Output signal / Supply Standard -wire: ma / V S = 9... V DC Option -wire -wire: V / V S =.5... V DC Performance : ± 0.5 % FSO option: ± 0.5 % FSO Permissible load R max = [(V S V S min) / 0.0 A] Ω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Turn-on time 700 msec Mean response time < 00 msec measuring rate: 5/sec Max. response time 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C electronic / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PUR (-5 70 C) black FEP 4 (-5 70 C) black TPE (-5 00 C) blue cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) : PP option: PVDF / EPDM / F ceramics Al O 99.9 % Miscellaneous Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption max. ma approx. 0 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) p I supply + VS -wire-system (voltage) supply + p U signal + V VS Dimensions (in mm) Accessories Terminal clamp Suitable for all probes with cable mm Material : steel, zinc plated optionally: stainless steel.40 (04) approx. 60 g Ordering type Terminal clamp, steel, zinc plated Terminal clamp, stainless steel.40 (04) option prepared for mounting with pipe R" Z0058 Z BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. Pin configuration cable colours (IEC 60575) Supply + wh (white) Supply bn (brown) Signal + (only for -wire) gn (green) Shield gnye (green-yellow) This document contains product specifications; properties are not guaranteed. Subject to change without notice.

43 LMK 809 PROBES Pressure in bar in mh O Input [mh O] [bar] PP PVDF E B LMK 809 Ceramics Al O 99.9% C Output 4 0 ma / -wire 0 0 V / -wire EPDM F % option 0.5 % PUR-cable FEP-cable TPE-cable 4 Cable length in m Special version pipe R" cable with integrated air tube for atmospheric pressure reference Nominal pressure from cmh O up to mh O Output signals -wire: ma -wire: V Special characteristics diameter 45 mm cable and probe separable chemical resistance housing PVC Optional versions cable protection via PVC pipe diaphragm 99.9 % AI O different kinds of cable different kinds of seal materials LMK 858 Separable Plastic Submersible Probe Ceramic Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO The separable plastic submersible probe LMK 858 is designed for level measurement in most aggressive media. Usage in more viscous media as for example sludge is possible because of the semiflush diaphragm. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Preferred areas of use are Sewage waste water treatment water recycling dumpsite Aggressive media level measurement in most of acids and lyes This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

44 LMK 858 LMK Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Output signal / Supply Standard -wire: ma / V S = 9... V DC option -wire: V / V S =.5... V DC Performance Permissible load Influence effects : option: R max = [(V S V S min) / 0.0 A] Ω supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω IEC ± 0.5 % FSO ± 0.5 % FSO Long term stability ± 0. % FSO / year at reference conditions Turn-on time 700 msec Mean response time < 00 msec measuring rate 5/sec Max. response time 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures Permissible temperatures medium: C electronic / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 additional external overvoltage protection unit in terminal box KL or KL with atmospheric pressure reference available on request Cable with sheath material PVC (-5 50 C) grey PUR (-0 50 C) black FEP 4 (-0 50 C) black Cable protection : without cable protection optional: prepared for mounting of a PVC pipe with diameter 5 mm cable with integrated air tube for atmospheric pressure reference 4 do not use freely suspended probes with an FEP cable if effects due to highly charging processes are expected Materials (media wetted) PVC grey / EPDM / : ceramics Al O 96 % option: ceramics Al O 99.9 % Miscellaneous Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance: signal line/shield also signal line/signal line: µh/m Current consumption max. 5 ma approx. 400 g (without cable) Ingress protection IP 68 CE-conformity EMC Directive: 004/08/EC Wiring diagram -wire-system (current) -wire-system (voltage) connector p supply + A p supply + VS Pin configuration Binder series 7 5 (5-pin) cable colours (IEC 60575) - wire - wire Supply + Supply Signal + (only for -wire) 5 in separated version Dimensions (in mm) Accessoies - Shield wh (white) bn (brown) gn (green) gnye (green-yellow) separated version special version for cable protection with PVC pipe Terminal clamp Suitable for all probes with cable mm Material : steel, zinc plated optionally: stainless steel.40 (04) approx. 60 g Ordering type Terminal clamp, steel, zinc plated Terminal clamp, stainless steel.40 (04) Z0058 Z BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. VS I U signal + V This document contains product specifications; properties are not guaranteed. Subject to change without notice.

45 LMK 858 SCREW-IN TRANSMITTERS LMK Pressure in bar in mh O Input [mh O] [bar] PVC A Ceramics Al O 96% Ceramics Al O 99.9% C Output 4 0 ma / -wire 0 0 V / -wire EPDM PVC-cable PUR-cable FEP-cable 0.5 % option 0.5 % Cable length in m Special version prepared for mounting with PVC pipe cable with integrated air tube for atmospheric pressure reference PVC pipe is not part of the supply Nominal pressure from mbar up to bar Output signals -wire: ma -wire: 0 0 ma / 0 0 V Special characteristics pressure port G /4" flush excellent accuracy small thermal effect excellent long term stability Optional versions accuracy 0.% FSO IEC IS-version: Ex ia = intrinsically safe for gases and dusts SIL application according to IEC 6508 / IEC 65 different electrical connections specific versions e. g. special pressure ranges LMP Screw-In Transmitter Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % / 0. % FSO The screw-in transmitter LMP has been designed for continuous level measurement and is characterized by an excellent performance and a robust construction. The modular construction allows the user the highest possible flexibility in the adaption of LMP. Optional features like e.g. an intrinsically safe version or a functionally safe version (SIL ) increase the advantages when launching and realizing projects for plants and systems. Preferred areas of use are Plant and Machine Engineering Energy Industry Environmental Engineering (water sewage recycling) This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

46 LMP 90 9 LMP LMP Stainless Steel Screw-In Transmitter Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] Vacuum resistance P N bar: unlimited vacuum resistance P N < bar: on request Output signal / Supply Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Option IS-version -wire: ma / V S = V DC SIL-version: V S = 4 8 V DC Options -wire -wire: ma / V S = V DC V / V S = V DC Performance : nominal pressure < 0.4 bar: ± 0.5 % FSO nominal pressure 0.4 bar: ± 0.5 % FSO option : nominal pressure 0.4 bar: ± 0.5 % FSO option : for all nominal pressures: ± 0. % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time -Leiter: 0 msec -Leiter: msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) with optional accuracy 0, % FSO the response time is 00 msec Thermal effects (Offset and Span) Nominal pressure P N [bar] 0.40 > 0.40 Tolerance band [% FSO] ± ± 0.75 in compensated range [ C] Permissible temperatures Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS ( Hz) according to DIN EN Shock 500 g / msec according to DIN EN Explosion protection (only for ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9-LMP zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0nF, L i 0 µh, the supply connections have an inner capacity of max. 7 nf opposite the housing Permissible temperature for in zone 0: C with p atm 0.8 bar bis. bar medium in zone or higher: C Conneting cables cable capacitance: signal line/shield also signal line / signal line: 60 pf/m (by factory) cable inductance: signal line /shield also signal line / signal line: µh/m Materials Pressure port stainless steel.4404 (6L) stainless steel.4404 (6L) : option: EPDM stainless steel.445 (6L) Media wetted parts pressure port, seals, diaphragm Miscellaneous Optionally SIL application according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma approx. 00 g Installation position any Operational life > 00 x 0 6 cycles CE-conformity EMC Directive: 004/08/EC ATEX Directive 94/9/EG Pressure transmitters are calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight deviation in the zero point for pressure ranges P N bar. Pin configuration s ISO 4400 Binder 7 Mx / metal cable colours (IEC field housing (5-pin) (4-pin) 60575) Supply + Supply Signal + (only for -wire) 4 IN + IN OUT + wh (white) bn (brown) gn (green) Shield ground pin 5 4 gnye (green-yellow) Wiring diagrams -wire-system (current) p I s (dimensions in mm) supply + option -wire-system (current/voltage) supply + p ISO 4400 Binder Series 7 5-pin Mx 4-pin cable outlet with PVC cable compact field housing cable outlet, cable with (IP 65) (IP 67) (IP 67) (IP 67) 4 (IP 67) ventilation tube (IP 68) 5 4 : m PVC cable (without ventilation tube, permissible temperature: C) 5 different cable types and lengths available, permissible temperature depends on kind of cable Mechanical connection (dimensions in mm) 6 not in combination with the accuracy 0.% VS I / U signal + for SIL- and SIL-Ex-version 6 G/4" flush (DIN 85) G/4" flush (DIN 85) with ISO 4400 with ISO 4400 A/V VS 05 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. This document contains product specifications; properties are not guaranteed. Subject to change without notice. Tel +49 (0) 9 5 / 98-0 Fax +49 (0) 9 5 / 98 - info@bdsensors.de LMP_E_05

47 LMP 9 9 SCREW-IN TRANSMITTERS Pressure in bar in mh O Input [mh O] [bar] Pressure port Stainless steel.4404 (6L) Stainless steel.445 (6L) Output 4 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire EPDM Male and female plug ISO 4400 Male plug Binder series 7 (5-pin) Cable outlet with PVC cable Cable outlet Male plug Mx (4-pin) / metal Compact field housing stainless steel.405 for P N 0.4 bar for P N < 0.4 bar option for P N 0.4 bar option Special version LMP E S T A 0 T R 0 M % 0.5 % % % ES Nominal pressure from mbar up to bar Output signals -wire: ma -wire: 0 0 ma / 0 0 V Special characteristics pressure port G /4" flush for pasty and impuritied media pressure port PVDF for aggressive media Optional versions LMK Screw-In Transmitter Ceramic Sensor accuracy according to IEC 60770: 0.5 % FSO The screw-in transmitter LMK has been especially designed for level and process measurement and is suitable for pressure measurement of liquids, oils and gases. Usage in more viscous or polluted media is possible because of the semi-flush pressure sensor. For the usage in aggressive media we recommended the version with PVDF pressure port. Additional features like e.g. an intrinsically safe version or a functionally safe version (SIL ) complete the range of possibilities. Preferred areas of use are Plant and Machine Engineering Prices EXW Thierstein, excluding package : m PVC cable without ventilation tube (permissible temperature: C), cable with ventilation tube (code TR0 = PVC cable), different cable types and lengths available, price without cable not in combination with SIL IS-version (only for 4 0mA / -wire): Ex ia = intrinsically safe for gases and dusts SIL application according to IEC 6508 / IEC 65 Energy Industry Environmental Engineering (water sewage recycling) specific versions Medical Technology This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

48 LMK LMK LMK Screw-In Transmitter Input pressure range Nominal pressure gauge [bar] Level [mh O] Overpressure [bar] Burst pressure [bar] , Vacuum resistance [bar] P N bar: unlimited vacuum resistance P N < bar: on request only possible with stainless steel pressure port Wiring diagrams -wire-system (current) p supply + I V S -wire-system (current / voltage) supply + p I / U A/V signal + VS Output signal / Supply Standard -wire: ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Option IS-protection -wire: ma / V S = V DC SIL-version: V S = 4 8 V DC Optionen -wire -wire: ma / V S = V DC V / V S = V DC IS-protection not possible with plastic pressure port Performance ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Response time -wire: 0 msec -wire: msec Long term stability ± 0, % FSO / year at reference conditions accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) / Permissible Temperatures Thermal error ± 0. % FSO / 0 K in compensated range C Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS ( Hz) according to DIN EN Shock 500 g / msec according to DIN EN Materials Pressure port / housing pressure port housing : options for P N 5 bar: stainless steel.4404 (6L) PVDF stainless steel.4404 (6L) PVDF Option compact field housing stainless steel.405 with cable gland brass nickel plated : options: EPDM ceramics Al O 96 % Media wetted parts pressure port, seals, diaphragm Explosion protection (only for ma / -wire) Approval DX9-LMK only for IBExU 0 ATEX 068 X / IECEx IBE.007X stainless steel pressure port zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing Permissible temperatures for in Zone 0: C with p atm 0.8 bar up to. bar environment in Zone or higher: C Connecting cables cable capacitance: signal line/shield also signal line / signal line: 60 pf/m (by factory) cable inductance: signal line /shield also signal line / signal line: µh/m Miscellaneous Option SIL application according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma approx. 50 g Installation position any Operational life > 00 x 0 6 pressure cycles CE-conformity EMC Directive: 004/08/EC ATEX Directive 94/9/EG Pin configuration s Binder 7 Mx / metal cable colours ISO 4400 (5-pin) (4-pin) (IEC 60575) Supply + Supply Signal + (only for -wire) 4 wh (white) bn (brown) gn (green) Shield ground contact 5 4 gnye (green-yellow) s (dimensions in mm) option ISO 4400 Binder Series 7 5-pin Mx 4-pin cable outlet with PVC cable compact field housing cable outlet, cable with (IP 65) (IP 67) (IP 67) (IP 67) 4 (IP 67) ventilation tube (IP 68) 5 universal stainless steel housing.4404 with cable gland M0x.5 (ordering code 880) and other versions on request 4 : m PVC-cable without ventilation tube ( permissible temperature: C) 5 different cable types and length available, permissible temperature depends on kind of cable Mechanical connection (dimensions in mm) This document contains product specifications; properties are not guaranteed. Subject to change without notice. for SIL- and SIL-Ex-version G/4" flush (DIN 85) G/4" flush (DIN 85) with ISO 4400 with ISO BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. LMK_E_05

49 LMK SCREW-IN TRANSMITTERS LMK Pressure gauge in bar gauge in mh O Input [mh O] [bar] Analogue output 4 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire E S ES 0.5 % 5 Male and female plug ISO 4400 Male plug Binder series 7 (5-pin) Cable outlet with PVC cable 4 Cable outlet Male plug Mx (4-pin) / metal T A 0 T R 0 M 0 compact field housing stainless steel Mechanical connection G/4" DIN 85 with flush sensor K EPDM Pressure port Stainless steel.4404 (6L) for P N 5 bar 5 PVDF B Ceramics Al O 96% Special version only possible for pressure port of stainless steel Ex-protection not possible with plastic pressure port : m PVC cable without ventilation tube (permissible temperature: C) 4 cable with ventilation tube (code TR0 = PVC cable), different cable types and lengths available, price without cable 5 min. permissible temperature -0 C Nominal pressure from mbar up to bar Output signal -wire: ma -wire: 0 0 ma / 0 0 V Product characteristics pressure port PVDF-version for aggressive media pressure port G ½" for pasty and polluted media Optional versions IS-version Ex ia = intrinsically safe for gases and dust diaphragm 99.9 % AI O specific versions LMK 5 Screw-in Transmitter Ceramic Sensor accuracy according to IEC 60770: : 0.5% FSO option: 0.5% FSO The screw-in transmitter LMK 5 has been designed for measuring small system pressure and level measurement in container. The LMK 5 is based on an own-developed capacitive ceramic sensor element. Usage in viscous and pasty media is possible because of the flush mounted sensor. For the usage in aggressive media a pressure port in PVDF and the diaphragm in AI O 99.9 % is available. An intrinsically safe version complete the range of possibilities. Preferred areas of use are Plant and Machine Engineering Environmental Engineering (water sewage recycling) Preferred used for Fuel and Oil Viscous and Pasty Media This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

50 LMK LMK 5 LMK 5 Screw-in Transmitter Pressure ranges Nominal pressure [bar] Level [mh O] Overpressure [bar] Low pressure [bar] Wiring diagram -wire-system (current) p supply + A -wire-system (current/voltage) p supply + V S Output signal / Supply Standard -wire: ma / V S = 9... V DC Option Ex-version -wire: ma / V S = V DC Option -wire -wire: V / V S =.5... V DC Performance : ± 0.5 % FSO option for P N 0.6 bar: ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Turn-on time 700 msec Mean measuring time 5/sec Response time mean response time: 00 msec max. response time: 80 msec accuracy according to IEC limit point adjustment (non-linearity, hysterisis, repeatability) Thermal effects (Offset and Span) / -Permissible temperatures Tolerance band ±0. % FSO / 0 K in compensated range C Permissible temperatures medium: C electronics / environment: C storage: C for pressure port of PVDF the minimum permissible temperature is -0 C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS ( Hz) according to DIN EN Shock 00 g / msec according to DIN EN Materials (media wetted) Pressure port : stainless steel.4404 (6L) option: PVDF : stainless steel.4404 (6L) option: PVDF C F C EPDM C : ceramics Al O 96 % options: ceramics Al O 99.9 % Media wetted parts pressure port, seals, diaphragm IS-protection (only for 4 0 ma / -wire) Approval DX4-LMK 5 IBExU05ATEX070 X stainless steel-pressure port with male (connector): Zone 0: II G Ex ia IIC T4 Ga Zone 0: II D Ex ia IIIC T85 C Da plastic-pressure port with male (connector): Zone 0/ : II /G Ex ia IIC T4 Ga/Gb Zone 0/ 4 : II /D Ex ia IIIC T85 C Da/Db Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i = 7 nf, L i = 5 µh Max. permissible temperature in zone 0: C for p atm 0.8 bar up to. bar for environment zone and higher: C Connecting cables capacity: signal line / shield also signal line / signal line: 60 pf/m (by factory) inductance: signal line / shield also signal line / signal line: µh/m The designation depends on the used pressure range. With nominal pressure ranges 60 mbar the designation is G. 4 With nominal pressure ranges > 60 mbar and < 0 bar (see item 7 of the type-examination certificate) must be attended! Miscellaneous Current consumption signal output current: max. ma signal output voltage: max. 5 ma approx. 00 g Installation position any Operational life > 00 x 0 6 loading cycles CE-conformity EMV-directive: 004/08/EC ATEX Directive 94/9/EC I Pin configuration ISO 4400 Supply + Supply Signal + (only for -wire) s (dimensions in mm) Binder 7 (5-pin) 4 Mx (4-pin) Shield ground pin 5 4 option field housing IN + IN OUT + cable colours (IEC 60575) wh (white) bn (brown) gn (green) gnye (green-yellow) ISO 4400 Binder Series 7 5-pin Mx 4-pin cable outlet with PVC cable compact field housing cable outlet, cable with (IP 65) (IP 67) (IP 67) (IP 67) 4 (IP 67) ventilation tube (IP 68) 5 4 : m PVC cable without ventilation tube (permissible temperature: C) 5 different cable types and lengths available, permissible temperature depends on kind of cable Dimensions (in mm) G /" flush (DIN 85) stainless steel 6 not possible in combination with compact field housing V S signal + material A stainless steel ca. PVDF ca. 6 U V G /" flush (DIN 85) PVDF 6 04 BD SENSORS GmbH The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials. This document contains product specifications; properties are not guaranteed. Subject to change without notice. LMK 5_E_05

51 LMK SPECIAL VERSIONS LMK Pressure in bar in mh O Input [mh O] [bar] Output 4 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire E 0.5 % option for P N 0.6 bar: 0.5 % Male and female plug ISO 4400 Male plug Binder series 7 (5-pin) Cable outlet with PVC- cable Cable outlet Male plug Mx (4-pin) / metal compact field housing T A 0 T R 0 M Mechanical connection G /" DIN 85 with flush sensor M EPDM F 7 Pressure port Stainless steel.4404 (6L) PVDF Ceramics Al O 96% Ceramics Al O 99.9% Special version : m PVC cable without ventilation tube (permissible temperature: C) cable with ventilation tube (code TR0 = PVC cable), different cable types and lengths available, price without cable not possible in combination witn compact field housing; min. permissible temperature -0 C B C Input pressure range EP 500 Pressure Transmitter Special application: level measurement via air bubbling Characteristics: capacitive ceramic sensor nominal pressure range from mbar up to bar output signal ma / -wire hat rail housing programming via integrated interface Nominal pressure P N gauge [bar] Nominal pressure P N abs. [bar] on request Permissible overpresure [bar] Permissible vacuum for P N gauge Output signal / Supply [bar] Standard -wire: ma / V S = 9... V DC; V S Nom. = 4 V DC Current consumption max. ma Performance IEC : ± 0. % FSO BFSL: ± 0. % FSO Turn-on time 700 msec Permissible load R max = [(V S V S min) / 0.0 A] Ω Long term stability ± 0. % FSO / year at reference conditions Response time ( %) 0 msec without consideration of electronic damping Measuring rate 8/sec for nominal pressure ranges 0.4 bar the accuracy is calculated as follows: ± [ x(nominal pressure range / adjusted range)] % FSO accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal errors (Offset and Span)/ Permissible temperatures Thermal error ± (0.0 x nominal range / adjusted range) % FSO / 0 K in compensated range 0 80 C Permissible temperatures medium: C electronics / environment / storage: C This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

52 EP 500 EP Electrical protection Short-circuit protection Reverse polarity protection permanent no damage, but also no function Input terminal clamps (-pin) Communication connector Mx (8-pin), metal Materials Pressure port : stainless steel.40 on request: brass version EP 500: PA6 (housing foot: PA66) varsion EP : ABS (media wetted) ceramic Al O 96 % Media wetted parts pressure port, seals of sensor, diaphragm Category of the environment Lloyd s Register (LR) EMV, EMV, EMV number of certificate: /0056 Germanischer Lloyd (GL) C, EMC number of certificate: HH Miscellaneous Ingress protection IP 00 Function display green SMD-LED - lights by information flow through the transmitter Installation position Operational life any > 00 x 0 6 pressure cycles approx. 00 g Adjustability configuration via programming kit CIS 700 ; following configurations are possible: - electronic damping: sec - offset: % FSO - turn down of span: max. :0 - configuration of pressure unit - calibration via connected pressure reference programming kit has to be ordered separately (software appropriate for Windows 95, 98, 000, NT Version 4.0 or higher, and XP) Dimensions (in mm) EP 500: option EP G/4" optionally for P N 5 bar: hose connection for flexible hoses Ø 4 mm optionally for PN 5 bar: Pin configuration s terminal clamps Mx (8-polig), metal Supply + Supply + Supply Tx Rx GND NC Shield Wiring diagram p supply + V S G/4" hose connection for flexible hoses Ø 4 mm I This document contains product specifications; properties are not guaranteed. Subject to change without notice.

53 EP 500 ACCESSORIES Pressure Input Output gauge absolute U P 5 U P 6 consult [bar] % B Mechanical connection hose connection Ø 4.5 mm G/4" EN 87 Y Seal Pressure port stainless steel.40 (04) brass M consult Special version EP 500 hose connection only up to 5 bar 4 0 ma / -wire ceramics Al O 96% option consult 9 9 Product characteristics aluminium die cast case for connecting -wire submersible transmitters integrated pressure balance item signal lines Optional versions overvoltage protection with nominal discharge current of 0 ka Pt 00 temperature sensor for submersible pressure transmitters with built in Pt 00 sensor Terminal Box Aluminium KL The terminal box KL is intended for the professional electrical connection of -wire transmitters. It offers integrated atmospheric pressure compensation. Optionally with overvoltage protection and Pt 00 temperatur sensor for BD SENSORS devices. The terminal box KL is equipped with a pressure balance item for equalization of atmospheric reference, therefore a cable without ventilation tube can be used on the supply side. Vertical terminal clamps enable easy connection of cables inside. The terminal box has to be mounted with two fastening screws. This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

54 KL KL General specifications Number of signal lines -wire ( ma) aluminium die cast case, grey powder-coating Ingress protection IP 66 Cable entries cable gland M6x.5 Polyamide, seals NBR, IP 68, diameter range: mm Atmospheric pressure compensation pressure balance item with PTFE filter Terminal clamps vertical clamps for stranded and solid wires up to.5 mm approx. 550 g Optional overvoltage protection Series resistance Nominal discharge current Max. rated current 0 Ω for each wire 0 ka (8/0 µs) 0 ma Optional Pt 00 temperature sensor Temperature range : C option: T min... T max can be in range from -40 C up to 400 C Connection temperature sensor -wire Output signal / Supply -wire: 4 0 ma / V S = 4 V DC < 0.5 % Linearity < 0. % Thermal effects < 0.0 % / K only necessary if the transmitter is equipped with a Pt 00 temperature sensor Wiring diagram KL - ZB.60 Version over voltage protection thermo element Pt 00 thermo element Pt 00 and over voltage protection Special version T 0 T only necessary if the submersible transmitter is equipped with a Pt 00 temperature sensor pressure signal supply + temp.-signal supply + V S * The ground wires of all components have to be connected! * The supply V S has to be chosen according to needs of the used transmitter. Dimensions (in mm) equipped only with Pt 00 version mounting hole Pt 00 transmitter (equipped only with Pt 00 version) GND V S V S+ T T T+ GND VT+VT VP+VP depth of housing: 58 mm ground 4 mm² cable gland M6x.5 pressure balance item This document contains product specifications; properties are not guaranteed. Subject to change without notice. This document contains product specifications; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.

55 ACCESSORIES KL Terminal Box Plastics KL General specifications Number of signal lines -wire ( ma) material plastic ABS, grey Ingress protection IP 66 Cable entries cable gland M6x.5 Polyamide, seals NBR, IP 68, diameter range: mm Atmospheric pressure compensation pressure balance item with PTFE filter Terminal clamps vertical clamps for stranded and solid wires up to.5 mm approx. 0 g Optional overvoltage protection Series resistance Nominal discharge current Max. rated current Optional HART connection Connections Wiring diagram 0 Ω for each wire 0 ka (8/0 µs) 0 ma terminal clamp connection supply + V S * Product characteristics cost-efficient ABS case for connecting -wire submersible transmitters integrated pressure balance item signal lines The terminal box KL is intended for the professional electrical connection of submersible level transmitters. Thus, it is a cost-effective alternative to our well proven aluminium terminal box KL. A pressure balance item is responsible for the compensation of atmospheric pressure variations. On the supply side a cable without ventilation tube can be used. Interface HART * The supply V S has to be chosen according to needs of the used transmitter. The ground wires of all components have to be connected! Dimensions (in mm) RS C PC Version with channels, eg. LMK 07T, LMP 07T Optional versions Vertical terminal clamps enable easy connection of cables inside the case. version with channels Version for two independent wire circuits overvoltage protection HART connection The KL with optional overvoltage protection is additionally equipped with surge arresters with a nominal discharge current of 0 ka. As a further option the KL is available with a HART connection. equipped only with HART version HA IN+ IN- GND HART Mounting hole 4. Cable gland M6x.5 Pressure balance item Cable gland M6x.5 Pressure balance item depth of housing: 55 mm Version for two independent wire circuits and over voltage protection, eg. for LMK 07T, LMP 07T HART is a registered trade mark of HART Communication Foundation This document contains product specifications; properties are not guaranteed. Subject to change without notice.