For safety concerns, please fully understand the safety requirements and cautions before using.

Size: px
Start display at page:

Download "For safety concerns, please fully understand the safety requirements and cautions before using."

Transcription

1

2 Preface Thanks for using SD700 series AC servo drive. VEICHI SD700 series is the general purpose high performance servo drive which adopts a series of advanced motor control algorithm and 24-bit high precision encoder, featuring high control precision, fast tracking response, simple and convenient debugging to meet the function and performance requirements in high-end general purpose servo applications. Rich application functions such as built-in point control function, electronic cam, RS485 interface, CANopen interface and 16-bit analog input can provide high reliability and high cost performance solutions for machine tools, electronic equipments, robots, textile applications, packaging industry and etc. This manual is delivered with equipment and only introduces safety precautions, installation and wiring, function code table, fault diagnoses and processing, monitoring parameters and etc. For detailed function explanations and application specifications please refer to SD700 series product instructions or consult VEICHI company. As it is the basic guide for proper use and safe operation, please carefully read and keep it and be sure to handle it to end users. If any problems or special requirements, please feel free to contact our company, dealers or the customer service center, we will provide dedicated service for you. This manual is subject to change without notice, thanks for your kind support. 1

3 Safety Precautions For safety concerns, please fully understand the safety requirements and cautions before using. Operational Qualifications Only professional trained person are allowed to operate the equipment. In addition, operators must undergo professional skills training and be familiar with the equipment installation, wiring, operation and maintenance, and can correctly respond to various emergency situations in use. Safety Guidance Safety regulations and warning signs come for your security. They are measures to prevent the operator and machine system from damage. Please carefully read this manual before using and strictly observe the regulations and warning signs while operating. Correct transport, store, installation and careful operation and maintenance are important for servo system safe operation. In transport and store process, make sure the servo system is free from impact and vibration. It must be stored where is dry without corrosive air and conductive dust, and the temperature bust be lower than 60 This product carries dangerous voltage and controls driver machine with potential danger. If you don t abide by the regulations or requirements in this manual, there is danger of body injury even death and machine damage. Do not wire while the power is connected. Otherwise, there is danger of death for electric shock. Before wiring, inspection, maintenance, please cut off power supply of all related equipments and ensure main DC voltage in safe range. And operate it after 10 minutes. Power line, motor line and control line must be fastened. The grounding terminal must be grounded reliably and the grounding resistance is less than 10Ω. Human body static electricity will seriously damage the internal sensitive devices. Before operation, please follow ESD measures, or there will be danger of servo system damage. As the output volatge of servo system is pulse weave, if components such as capacitors for improving power factor or pressure-sensitive resistances for anti-thunder are installed at the output side, please dismantle them or change to input side. 2

4 No switch components such as breaker and contactor at the output side (if necessary, please be sure the output current is 0 while the switch acting). No matter where the fault is, there is danger of serious accident. So there must be additional external prevent measures or backup device. Only used in application fields as maker stated. No use in equipments related to special fields such as emergency, rescuer, ship, medical treatment, avigation, nuclear and etc. Maintenance of this product can only be carried out by the company or the authorized professionals, unauthorized modification or using non-approved parts may lead to product faults. Any defective devices must be replaced in time during maintenance. 3

5 Chapter 1 Installation and wiring 1.1 Installation Dimensions Dimension Structure SIZE A SIZE B SIZE C SIZE D Model SD700-1R1A-** SD700-1R8A-** SD700-3R3A-** SD700-5R5A-** SD700-7R6A-** SD700-9R5A-** SD700-2R5D-** SD700-3R8D-** SD A-** SD700-6R0D-** SD700-8R4D-** SD D-** SD D-** SD D-** SD D-** Dimensions(mm) Installation dimensions (mm) Mou nting W H D W1 W2 H1 H2 A B apert ure \ \ M \ M \ M \ \ 4-M5 4

6 1.2 Main circuit terminal size L1 L2 L3 L1C L2C B1 + / B2 B3 U V W Pins numb er Sign nam e 1 L1 2 L2 3 L3 Main circuit interface Function Power input of the main circuit Please determine whether the input power is 220V or 400V according to the nameplate 220V models: 200V ~ 240V, -15% ~ +10% 50 / 60Hz 400V models: 380V ~ 440V, -15% ~ +10% 50 / 60Hz Note: "L3" terminal, SD700-1R1A, 1R8A, 3R3A models are single-phase inputs without this pin 4 L1C Control power input 5 L2C Power input requirements same with L1, L2, L3 6 B1/ + 7 B2 8 B3 9 - Regenerative resistor connection terminal SD700-1R1A, 1R8A, 3R3A. When regenerative braking capacity is insufficient, connect an external regenerative resistor between B1 / + and B2; other models remove short wiring or short connection between B2 and B3, Connect an external regenerative resistor between B1 / + and B2, The external regenerative resistor need be purchased separately. "B1 / +" terminals can be used for common DC bus positive power supply terminals Note: "B3" terminal, SD700-1R1A, 1R8A, 3R3A models without this pin "-" terminal can be used for common DC bus negative power supply terminals 10 U 11 V Connect the U, V, W phase of the motor 12 W 13 Safe ground 5

7 1.3 CN1 Control Terminal No.1 No.2 No.26 No.27 The appearance seen from the arrow direction is shown below. No.24 No.25 No.49 No.50 6

8 1.4 Position Control Wiring Diagram 7

9 1.5 Speed Control Wiring Diagram 8

10 1.6 Torque Control Wiring Diagram 9

11 1.7 Output Port Attentions 1.8 Brake Wiring When servo motor is used for vertical axis situations, the brake can be used to prevent or keep the falling speed of heavy loads when servo drive is in power off state. Wiring diagram of electromagnetic brake is shown as below: Servo driver Note: brake winding must use specialized 24V power supply, and do not share power source with control power or RY relay coil. RY RY Emergency stop Motor SO1+ SO V~24V + - DC24V Power supply for brake winding Surge absorption Fuse (5A) Brake winding Electromagnetic brake must be provided with a dedicated 24V power supply, be prohibited to share power source with control signal; RY means relay coil, please note the diode direction ; Electromagnetic brakes are for holding and can not be used for normal parking; Though electromagnetic brake has function to prevent or keep heavy objects from falling, external braking devices are still necessary. 10

12 1.9 CN2 Encoder Signal Terminal A Pins Define Sign Define AEnd Pins Number BEnd Pins Number +5V 0V BAT BAT- 4 4 SD+ SD PE(Shield) Iron Shell 7 B Motor Power Terminal U V W PE Pins Define Sign Define Terminals Pins Number U 2 V 3 W 4 PE CN6A/CN6B Bus Communication Terminal Pin 8 Pin 1 Pin 8 Pin 1 Port function table Pin No. Name Function Remarks 1 CANH CAN Data+ CN6A and 2 CANL CAN Data - CN6B has CAN 3 CAN Signal GND exactly same G signal Data - distribution, Data + and the internal parallel can 7 GND 485Signal GND facilitate multiple network Shell Shield connections. 11

13 1.12 Keyboard Layout and Function Specifications MODE DATA SET Key MODE/SET DATA/ Function Switch modes and return to menu interface Assist function execution Select up parameters or increase values; Switch between high, middle and low section value display. Select down parameters or decrease values; Switch between high, middle and low section value display. Long press=data (about 1 second) Enter sub-menu under parameter mode and enter parameter modification under editing mode, then confirm after parameter modification by shortly pressing = ; Change group code under parameter mode, and move the blinking characters left to select the modification parts under editing mode. 12

14 Chapter 1 Function Code List Functio n code Parameters Min value Max value Default Unit Effectiv e way Pn0 basic control Pn000 Control mode selection RST Motor rotation direction Pn002 selection RST Pn003 Default monitoring parameters 0x0000 0x0fff 0x0fff - INST Servo OFF and stop method Pn004 selection when occurs alarm RST Servo stop method selection Pn005 when occurs alarm 2 0x0000 0x RST Selection of overtaking alarm Pn006 detection RST Stop method selection while Pn007 servo overtaking RST Servo locking time after Pn008 electromagnetic brake action ms INST Electromagnetic brake action Pn009 delay ms INST Motor speed setting when Pn010 electromagnetic brake is rpm INST released Pn012 External braking resistor power W INST Pn013 External braking resistor value mω INST Pn015 Overload warning value % INST Base current derating at motor Pn016 overload detection % RST Pn030 Retention parameter INST Parameter modification Pn031 operation lock RST Upper limit value of multi Pn039 rotating circles Rev RST Instructions of absolute Pn040 encoder RST Function selection of under Pn045 voltage 0x0000 0x RST 13

15 Torque limit while main circuit Pn046 voltage drops % INST Delay time of torque limit Pn047 release while main circuit ms INST voltage drops Pn050 Torque limitation set INST Pn051 Max torque limitation % INST Pn052 Max torque limitation % INST Pn053 Emergency stop torque % INST Operator parameter display Pn061 selection 0x0000 0x RST Pn062 DB resistance power W INST Encoder frequency-dividing Pn070 pulse RST Reverse direction of output Pn072 frequency division output RST Pn080 Local communication address 0x0000 0x007F 1 - RST RS485 communication baud Pn081 rate selection RST RS485 communication Pn082 verification mode RST Pn1 Gain parameters Pn100 Rotary inertia ratio % INST Pn101 First speed gain Hz INST First velocity integral time Pn102 constant ms INST Pn103 First position gain /s INST Pn104 First torque command filter ms INST Pn105 Second speed gain Hz INST Second velocity integral time Pn106 constant ms INST Pn107 Second position gain /s INST Pn108 Second torque command filter ms INST Gain switching mode selection Pn110 switch 0x0000 0x INST Automatic position control gain Pn111 switching condition 0x0000 0x INST 14

16 Pn112 Gain switching transition time ms INST Pn113 Gain switching transition time ms INST Pn114 Gain switching delay time ms INST Pn115 Gain switching delay time ms INST Pn120 Position integral time constant ms INST Pn121 Speed feedforward gain % INST Pn122 Speed feedforward filter time ms INST Use V-REF as the speed Pn123 feedforward selection 0x0000 0x RST Speed/Position control Pn124 selection (T-REF distribution) RST Speed detection method Pn126 selection (speed feedback 0x0000 0x RST moving average filter valid) Speed loop control method Pn130 (PI/IP) RST Speed loop P/PI switch Pn131 condition switch 0x0000 0x INST Speed loop P/PI switching Pn132 condition (torque command) % INST Speed loop P/PI switching Pn133 condition (speed command) rpm INST Speed loop P/PI switching Pn134 condition (acceleration) rpm/s INST Pn135 Pn140 Pn142 Pn143 Pn150 Pn151 Speed loop P/PI switching condition (position deviation) Medium frequency vibration suppression control selection First medium frequency vibration suppression frequency First medium frequency vibration suppression attenuation gain Notch filter 1 automatic adjustment selection Notch filter 2 automatic adjustment selection Comma nd unit INST 0x0000 0x0013 0x INST Hz INST % INST 0x0000 0x INST 0x0000 0x INST 15

17 Automatic trap resonance Pn152 detection sensitivity % INST Pn153 Notch filter 1 frequency Hz INST Pn154 Notch filter 1 Q value INST Pn155 Notch filter 1 depth INST Pn156 Notch filter 2 frequency Hz INST Pn157 Notch filter 2 Q value INST Pn158 Notch filter 2 depth INST Disturbance compensation Pn160 function selection 0x0000 0x INST Disturbance observer cutoff Pn161 frequency Hz INST Disturbance compensation Pn163 coefficient % INST Disturbance observer inertia Pn165 correction factor % INST Pn166 Speed observer switch RST Speed observer cutoff Pn167 frequency Hz INST Friction torque compensation Pn170 cutoff speed rpm INST Pn171 Pn172 Friction torque forward compensation coefficient Friction torque reverse compensation coefficient %/100rp m %/100rp m INST INST Pn175 Robust control options 0x0000 0x RST Pn177 Robust control tuning values Hz INST Minimum load values of robust Pn178 control % INST Pn185 Vibration detection selection 0x0000 0x INST Pn186 Vibration detection sensitivity % INST Pn187 Vibration detection value rpm INST Pn2 Positional parameters Command pulse input selection Pn200 (low/high speed filter) RST Pn201 Pulse input form RST Pn202 Reversed pulse input direction RST 16

18 Command pulse input Pn203 magnification x1 INST Pn204 Electronic gear ratio molecule RST Electronic gear ratio Pn206 denominator RST Position instruction low pass Pn211 filter time constant ms STOP Position command slide Pn212 average filter time ms STOP Low frequency vibration Pn230 suppression selection 0x0000 0x INST Low frequency vibration Pn231 suppression function automatic 0x0000 0x INST tuning selection Low-frequency vibration Pn232 detection sensitivity (relative % INST positioning is completed) Low frequency vibration Pn235 suppression 1 frequency Hz INST Low frequency vibration Pn236 suppression 1 correction % INST Low frequency vibration Pn237 suppression 2 frequency Hz INST Low frequency vibration Pn238 suppression 1 correction % INST Instructions of external Pn250 encoders under full closed loop INST control mode Speed feedback selection Pn251 under full closed loop control 0x0000 0x RST mode Division coefficient of tuning 1 Pn252 cycle between motor and load % INST Pn253 External grating ruler resolution P/Rev RST Pn257 Large mixed deviation set Comma nd unit INST Pn259 Encoder output resolution P/pitch RST Pn260 NEAR signal length Comma nd unit INST 17

19 Pn262 Position coverage area Pn264 Position deviation maximum tolerance value Comma nd unit Comma nd unit INST INST Pn266 Large position deviation alarm % INST Pn267 Pn269 Pn270 Alarm value of large position deviation when servo is on Alarm threshold of large position deviation when servo is on Speed limitation when servo is on Comma nd unit INST % INST rpm INST Pn272 Retention pulse reset mode 0x0000 0x RST Position deviation reset mode Pn273 selection 0x0000 0x RST Pn274 / COIN output time 0x0000 0x RST Pn3 Speed parameters Pn300 Analog speed command gain /rate d speed INST Reversed analog speed Pn301 command INST Analog speed command filter Pn302 time ms INST Analog speed command dead Pn303 zone range V INST Pn304 Internal speed rpm INST Pn305 Internal speed rpm INST Pn306 Internal speed rpm INST Speed command trapezoidal Pn310 acceleration time ms INST Speed command trapezoidal Pn311 deceleration time ms INST Pn312 Speed zero-clamp mode INST Speed zero-clamp threshold Pn313 value rpm INST Pn317 Rotation judgment value rpm INST Pn320 Speed matching range rpm INST 18

20 Pn4 Torque parameters Pn400 Torque command selection INST Torque command 2nd order Pn401 low pass filter cutoff frequency Hz INST Torque command 2nd order Pn402 low pass filter Q value INST Torque command direction Pn403 setting INST Analog value torque command Pn404 filter time ms INST Pn405 Analog value torque command gain V/rat ed torque INST Reversed analog value torque Pn406 command INST Analog torque command dead Pn407 zone range V INST Internal torque command under Pn410 torque control % INST Speed limitation mode setting Pn411 under torque control RST Pn412 Speed limitation selection 0x0000 0x RST speed limitation under torque Pn413 control rpm INST Pn5 JOG related parameters Pn500 JOG speed rpm INST Pn502 Program JOG running mode 0x0000 0x INST Pn503 Program JOG moving distance Comma nd unit INST Program JOG Pn505 acceleration/deceleration time ms INST Pn506 Program JOG waiting time ms INST Pn507 Program JOG moving times 次 INST Pn508 Program JOG moving speed rpm INST Pn6 Switch configuration related parameters Switch input signal distribution Pn600 mode RST Pn601 Switch 1 input configuration 0 0x114 0x001 - RST

21 Pn602 Switch 2 input configuration 0 0x114 0x002 - RST Pn603 Switch 3 input configuration 0 0x114 0x003 - RST Pn604 Switch 4 input configuration 0 0x114 0x004 - RST Pn605 Switch 5 input configuration 0 0x114 0x005 - RST Pn606 Switch 6 input configuration 0 0x114 0x006 - RST Pn607 Switch 7 input configuration 0 0x114 0x007 - RST Pn608 Switch 8 input configuration 0 0x114 0x00 - RST Pn609 Switch 9 input configuration 0 0x114 0x00 - RST Switch input internal Pn610 configuration 1 0 0x14 0x00 - RST Switch input internal Pn611 configuration 2 0 0x14 0x00 - RST Switch input internal Pn612 configuration 3 0 0x14 0x00 - RST Pn613 Switch 1 output configuration 0 0x109 0x000 - RST Pn614 Switch 2 output configuration 0 0x109 0x001 - RST Pn615 Switch 3 output configuration 0 0x109 0x002 - RST Pn622 Warning detection selection 0x0000 0x RST Pn7 Extension related parameters Pn705 Inertia identification initial value % INST Scan torque command Pn723 amplitude % INST Pn730 No motor test function selection 0x0000 0x RST No motor test function encoder Pn731 resolution selection RST No motor test function encoder Pn732 selection 0x0000 0x RST Monitoring parameters 1 Un000 Motor rotation speed 0x x7fffffff 0 rpm INST Un001 Speed command 0x x7fffffff 0 rpm INST Un002 Internal torque command 0x x7fffffff 0 % INST Un003 Rotor pulse position relative to the Z axis 0x x7fffffff 0 pulse INST 20

22 0x Un004 Electrical angle 00 Un005 Speed of input pulse command 0x Un006 Counter of input command pulse Un007 Counter of feedback pulse Un008 Counter of feedback pulse 1 Un009 Position deviation Un00A Cumulative load rate Un00B Regeneration load rate Un00C Electricity consumption of DB resistance 0x x x x x x x x7fffffff 0 deg INST 0x7fffffff 0 rpm INST 0x7fffffff 0 0x7fffffff 0 0x7fffffff 0 Comma nd unit Comma nd unit Encoder pulse unit INST INST INST 0x7fffffff 0 pulse INST 0x7fffffff 0 % INST 0x7fffffff 0 % INST 0x7fffffff 0 % INST Un00D Effective gain monitoring INST Un00E Total running time 0 0xFFFFFFFF 0 100ms INST Un00F Overload rate 0 0xFFFFFFFF 0 % INST Un035 DSP software version 0 0xFFFF 0 - INST Un036 FPGA software version 0 0xFFFF 0 - INST Un090 Heat sink temperature 0 0xFFFF 0 INST Monitoring parameters 2 Un100 IO port input signal monitoring 0 0xFFFF 0 - INST Un101 IO port output signal monitoring 0 0xFFFF 0 - INST Un102 T-REF monitoring 0 0xFFFF 0 % INST Un103 V-REF monitoring 0 0xFFFF 0 rpm INST Pulse command input Un104 frequency 0 0xFFFFFFFF 0 pps INST Safety terminal HWBB input Un105 signal monitoring 0 0xFFFF 0 - INST Un108 Un110 External input command pulse counter Integrated monitoring of internal signal status 0 0xFFFFFFFF 0 Comma nd unit INST 0 0xFFFFFFFF 0 - INST

23 Integrated monitoring of Un120 internal input signal status 0 0xFFFFFFFF 0 - INST Integrated monitoring of Un130 internal output signal 0 0xFFFFFFFF 0 - INST Un140 Main circuit bus voltage 0 0xFFFF 0 V INST Un141 Effective current feedback 0 0xFFFF 0 % INST Un142 Instantaneous load rate 0 0xFFFF 0 10% INST Instantaneous regenerative Un143 load rate 0 0xFFFF 0 % INST Electricity consumption of Un144 instantaneous DB resistance 0 0xFFFF 0 % INST Un145 Maximum cumulative load rate 0 0xFFFF 0 % INST Command monitoring of D-axis Un14B current 0 0xFFFF 0 % INST Monitoring parameters 3 Un300 Current alarm code 0 0xFFFF 0 - INST Un301 Last alarm code 0 0xFFFF 0 - INST Un302 Timestamp while alarm occurs 0 0xFFFFFFFF 0 100ms INST Motor speed while alarm Un303 occurs 0 0xFFFF 0 rpm INST Speed command while alarm Un304 occurs 0 0xFFFF 0 rpm INST Internal torque command while Un305 alarm occurs 0 0xFFFF 0 % INST Input command pulse speed Un306 while alarm occurs 0 0xFFFF 0 rpm INST Deviation counters (position Un307 deviation)while alarm occurs 0 0xFFFFFFFF 0 pulse INST DC bus voltage while alarm Un308 occurs 0 0xFFFF 0 V INST Effective current feedback Un309 while alarm occurs 0 0xFFFF 0 % INST Cumulative load rate while Un30A alarm occurs 0 0xFFFF 0 % INST Regenerative load rate while Un30B alarm occurs 0 0xFFFF 0 % INST Electricity consumption of DB Un30C resistance while alarm occurs 0 0xFFFF 0 % INST 22

24 Maximum cumulative load rate Un30D while alarm occurs 0 0xFFFF 0 % INST Rotation inertia ratio while Un30E alarm occurs 0 0xFFFF 0 % INST Abnormal times of serial Un30F encoder communication while 0 0xFFFF 0 - INST alarm occurs Internal signal monitoring while Un310 alarm occurs 0 0xFFFFFFFF 0 - INST Internal input signal monitoring Un313 while alarm occurs 0 0xFFFFFFFF 0 - INST Internal output signal Un317 monitoring while alarm occurs 0 0xFFFFFFFF 0 - INST Un320 Fault code history 1 0 0xFFFF 0 - INST Un321 Fault code history 2 0 0xFFFF 0 - INST Un322 Fault code history 3 0 0xFFFF 0 - INST Un323 Fault code history 4 0 0xFFFF 0 - INST Un324 Fault code history 5 0 0xFFFF 0 - INST Un325 Fault code history 6 0 0xFFFF 0 - INST Un326 Fault code history 7 0 0xFFFF 0 - INST Un327 Fault code history 8 0 0xFFFF 0 - INST Un328 Fault code history 9 0 0xFFFF 0 - INST Un329 Fault code history xFFFF 0 - INST Un330 Fault time history 1 0 0xFFFFFFFF 0 100ms INST Un331 Fault time history 2 0 0xFFFFFFFF 0 100ms INST Un332 Fault time history 3 0 0xFFFFFFFF 0 100ms INST Un333 Fault time history 4 0 0xFFFFFFFF 0 100ms INST Un334 Fault time history 5 0 0xFFFFFFFF 0 100ms INST Un335 Fault time history 6 0 0xFFFFFFFF 0 100ms INST Un336 Fault time history 7 0 0xFFFFFFFF 0 100ms INST Un337 Fault time history 8 0 0xFFFFFFFF 0 100ms INST Un338 Fault time history 9 0 0xFFFFFFFF 0 100ms INST Un339 Fault time history xFFFFFFFF 0 100ms INST Note: Effective ways INST: effective immediately; RST: restart effect; STOP: effective after motor stop. 23

25 Fault code Er.020 Er.021 Er.022 Er.030 Er.040 Er.041 Er.042 Er.050 Er.0B0 Er.100 Chapter 3 Fault Code and Countermeasure Fault type Parameters and check exception Parameters formatted exception (inconsistent version) System and check exceptions Main circuit detection part exception Parameters setting exception Frequency-dividing pulse output setting exception Parameter combination exception Mismatching drive and motor capacity Invalid alarm of servo on command Over current Countermeasures 1.Input parameters again after formatting 2. Servo drive malfunction and needs replacement 1. Write in parameters of other servo drive that has the same software version and mode, then turn on power supply. 2. Servo drive malfunction and needs replacement Servo drive malfunction and needs replacement Servo drive malfunction and needs replacement 1. The modified parameters should be within the set range. 2. The electronic gear ratio must be within the set range. 3. Servo drive and servo motor capacity must match. Set proper value for the encoder frequency-dividing pulse. 1. The electronic gear ratio must be within the set range. 2. Make the program JOG setting meet logic. The drive does not match the motor capacity 1. Turn on the drive power again. 2.Reset software; 1. Might be cable short circuit. Change cable. 2. Might be servo motor fault. Change servo motor. 3. Servo drive fault, change servo unit. 24

26 Er.300 Er.320 Er.400 Er.410 Er.510 Er.511 Er.520 Regenerative fault Regenerative overload Over voltage Under voltage Over speed Over speed of frequency dividing pulse Vibration alarm 1.Correctly wire the external regenerative resistance. 2. After troubleshooting the wiring, change servo drive if it has fault. 1. Set the supply voltage within the specification range. 2. Correctly set the value of resistor and capacity. 3. Servo drive malfunction and needs replacement. 1. Adjust the AC/DC power voltage to the specification range. 2. According to the actual situation, analyze the capacity of the regenerative resistance. 1. Adjust the AC / DC power voltage to the specification range. 2. Expand power capacity. 1. Check motor wiring. 2. Reduce speed command value, or adjust the gain 1. Reduce frequency diving pulses. 2. Reduce running speed. 1. Reduce motor speed or speed loop gain. 2. Correctly set rotation inertial ratio. Er.550 Max speed setting exception Correctly set max speed Er.710 Er.720 Overload (instantaneous max load) Overload (constant max load) Er.730 BD overload 1 1. Check motor wiring and encoder wiring 2. Inappropriate motor or encoder selection. 1. Check motor wiring and encoder wiring. 2. Inappropriate motor or encoder selection. 1. Reduce motor command speed 2. Decrease rotation inertial ratio. 3.Servo drive malfunction and needs replacement. 25

27 Er.731 BD overload 2 1. Reduce motor command speed. 2. Decrease rotation inertial ratio. 3. Servo drive malfunction and needs replacement. Er.7A0 Heat sink overheat 1.Improve installation environment and decrease ambient temperature. 2. Re-confirm the load conditions and operating conditions. 3. Servo drive malfunction and needs replacement. Er.B33 Safe terminals input Correctly connect safe terminals Er.BF4 Hardware over current 1. Might be cable short circuit. Change cable. 2. Might be motor fault. Change servo motor. 3.Servo drive malfunction and needs replacement. Er.C10 Out of control alarm 1. Check motor wiring. 2. Reduce speed command value or adjust gain. Er.C90 Er.C91 Er.C92 Er.CA0 Er.CB0 Er.D00 Er.D01 Er.D02 Encoder communication fault: disconnection Data acceleration exception of encoder communication position Timer exception of encoder communication Encoder parameters exception Encoder loopback checking exception Large position deviation Large position deviation under servo ON Large position deviation alarm caused by speed limitation under servo ON. 1.Correctly select encoder cable. 2.Improve using environment and correctly wire the encoder. 3.Shorten encoder cable, correctly connect shield wires. 4. Might be servo drive fault and needs replacement. 1. Correctly set gear ratio, gain, position filter, torque limit and etc. 2.Check the wiring of encoder cable. 3.Might be servo drive fault and needs replacement. Correctly set value of position deviation under servo ON. 1.Correctly set speed limitation value under servo ON. 2.Reasonably set alarm value of position deviation under servo ON. 26

28 Alarm code AL.900 AL.901 AL.910 AL.911 AL.920 AL.921 AL.941 AL.971 Alarm type Large position alarm deviation Alarm of position deviation excess when servo ON Overload alarm Vibration alarm Regenerative overload alarm DB overload alarm Alarm of re-power due to parameters update Under voltage alarm Countermeasures 1.Set correctly gear ratio, gain, position filter, torque limit etc. 2.Check connecting cable of motor and encoder 3.After eliminating reasons, it s possible.that servo drive malfunction, please replace it. Set correctly threshold value of position deviation excess when servo ON. 1. Check the wiring of motor and encoder. 2. Inappropriate motor or encoder selection. 1. Reduce motor speed or speed loop gain. 2. Correctly set rotation inertial ratio. 1. Set power voltage within the specification range. 2. Correctly set the value of resistor and capacity. 3. Servo drive malfunction and needs replacement. 1. Adjust the AC/DC power voltage within product specification range. 2. According to the actual situation, analyze the capacity of the regenerative resistance. Restart drive after power down 1. Adjust the AC/DC power voltage to the product specification range. 2. Expand power capacity.. 27

29 Appendix I: Braking resistor selection Model Braking voltage Built-in resistors External resistance minimum value External resistor maximum value SD700-1R1A 380 None SD700-1R8A 380 None SD700-3R3A 380 None SD700-5R5A Ω 60W SD700-7R6A Ω 60W SD700-9R5A Ω 60W SD A Ω 200W SD700-2R5D Ω 60W SD700-3R8D Ω 60W SD700-6R0D Ω 60W SD700-8R4D Ω 60W SD D Ω 60W SD D Ω 200W SD D Ω 200W SD D Ω 200W Note: If needing external braking resistor, please according to the onsite braking frequency and the braking resistor heat dissipation condition to choose proper braking resistance value on the above table. If any queries, please consult the manufacturer. 28

30 Appendix II: Parameter record table Recorder Record time Function code Initial debugging value First modified value Second modified value Remark 29

31 Packing list Items Description Quantity 1 Servo Drive 1 2 SCSI Plus(50P) 1 3 Simple Manual 1 4 7P Pluggable Terminals Block 1 5 3P Pluggable Terminals Block 1 6 Terminal Handle 1 Remark: Item 4, 5 and 6 are only for below modes: SD700-1R1A-**/SD700-1R8A-**/SD700-3R3A-** When open the package, please carefully check if the contents are consistent with the packing list. Any doubt, please contact your dealer. 30

32

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 10 10.1 Alarm Displays............................................10-2 10.1.1 List of Alarms...................................................... 10-2 10.1.2 of Alarms............................................

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) F Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) D Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

About this Manual: Chapter 1 provides a summary of the Servo System and all gains used for the Servo System loops.

About this Manual: Chapter 1 provides a summary of the Servo System and all gains used for the Servo System loops. About this Manual: This guide describes the installation and startup procedures of the Servo System so that it can be efficiently put in actual operation in a short time. This guide provides detailed descriptions

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) B Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) B Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or

Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic,

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 9 9.1 Alarm Displays..............................................9-2 9.1.1 List of Alarms........................................................ 9-2 9.1.2 of Alarms..............................................

More information

Troubleshooting 12. This section explains the items to check when problems occur, and troubleshooting by the use of error displays or operation state.

Troubleshooting 12. This section explains the items to check when problems occur, and troubleshooting by the use of error displays or operation state. Troubleshooting 12 This section explains the items to check when problems occur, and troubleshooting by the use of error displays or operation state. 12-1 Actions for Problems..........................................

More information

DS2 series servo drive

DS2 series servo drive DS2 series servo drive Manual WUXI XINJE ELECTRIC CO., LTD. Data No.: SC209 20110412 1.0 2 Safety notes Confirmation Do not use the drivers that are broken, lack of parts or wrong types. Installation Make

More information

General-Purpose AC Servo. Servo Amplifier Instruction Manual (Troubleshooting)

General-Purpose AC Servo. Servo Amplifier Instruction Manual (Troubleshooting) General-Purpose AC Servo Servo Amplifier Instruction Manual (Troubleshooting) SAFETY PRECAUTIONS (Please read the instructions carefully before using the equipment.) To use the equipment correctly, do

More information

DS2 series 220V servo driver

DS2 series 220V servo driver DS2 series 220V servo driver Fast reference manual Xinje Electronic Co.,Ltd. Serial NO.SC209 20120312 1.0 2 DS2 series 220V servo driver user manual Safety caution Confirmation when receive products DO

More information

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 8 8.1 Alarm Displays..............................................8-2 8.1.1 List of Alarms........................................................ 8-2 8.1.2 of Alarms..............................................

More information

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) K Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

Committed to Premium Quality. AC Servo System Catalog

Committed to Premium Quality. AC Servo System Catalog Committed to Premium Quality AC Servo System Catalog Company Profile CONTENTS DB100 Series AC Servo System 03 Application fields 04 Servo Driver Product Description 05 Servo Motor Product Description 07

More information

Cat. No. I534-E1-02 OPERATION MANUAL SMARTSTEP A SERIES. MODELS (Servomotors) (Servo Drivers) Servomotors/Servo Drivers

Cat. No. I534-E1-02 OPERATION MANUAL SMARTSTEP A SERIES. MODELS (Servomotors) (Servo Drivers) Servomotors/Servo Drivers Cat. No. I534-E1-02 OPERATION MANUAL SMARTSTEP A SERIES MODELS R7M-A@ (Servomotors) R7D-AP@ (Servo Drivers) Servomotors/Servo Drivers Thank you for choosing this SMARTSTEP A-series product. Proper use

More information

Index 2. G Gain settings 4 31 Glossary of terms A 2 Grommets 2 13

Index 2. G Gain settings 4 31 Glossary of terms A 2 Grommets 2 13 Index A A Group functions 3 9 AC reactors 5 3 Acceleration 1 15, 3 8 characteristic curves 3 26 second function 3 24 two-stage 4 19 Acceleration stop function 3 21 Access levels 3 5, 3 36, 4 25 Access

More information

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) N Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

AZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter

AZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter HM-6262 Closed Loop Stepping Motor and Driver Package Operation I/O signals Parameter AZ Series Function Edition Method of control via Modbus RTU (RS-485 communication) Method of control via industrial

More information

6.9 Jump frequency - Avoiding frequency resonance

6.9 Jump frequency - Avoiding frequency resonance E581595.9 Jump frequency - Avoiding frequency resonance : Jump frequency : Jumping width Function Resonance due to the natural frequency of the mechanical system can be avoided by jumping the resonant

More information

Integrated Servo Motor UCS57

Integrated Servo Motor UCS57 Integrated Servo Motor Introduction is a new generation of high performance digital integrated servo drive motor, which is a series of low voltage AC servo products integrated with AC servo motor and drive

More information

Installation Tech Note Dallas, Texas

Installation Tech Note Dallas, Texas AMC B40A40AC Installation Tech Note Dallas, Texas May, 2010 ! CAUTION! Do NOT apply air pressure to release the collet while the servo motor is rotating. The servo motor spindle must be FULLY STOPPED before

More information

Shenzhen Alpha Inverter Co., Ltd. AS100 AC Servo Drive

Shenzhen Alpha Inverter Co., Ltd. AS100 AC Servo Drive Shenzhen Alpha Inverter Co., Ltd. AS100 AC Servo Drive 1 Feature AS100 series AC servo system consists of the all-digital AC servo drive and the permanent-magnet servo motor. AS100 AC servo drive adopts

More information

MTY (81)

MTY (81) This manual describes the option "d" of the SMT-BD1 amplifier: Master/slave electronic gearing. The general information about the digital amplifier commissioning are described in the standard SMT-BD1 manual.

More information

Installation Servo Drive Dimensions

Installation Servo Drive Dimensions Installation Servo Drive Dimensions A B Model R88D WTA3H WTA5H A 55 160 130 50 8 149 75 5 0.8 4 1.25 WT01H WT02H WT04H A 75 160 130 63 8 149.5 75 5 1.1 8 2 WT08HH A 90 160 180 63 8 149.5 75 5 1.7 11 2

More information

Series SGDH Indexer Application Module USER'S MANUAL

Series SGDH Indexer Application Module USER'S MANUAL YASKAWA Series SGDH Indexer Application Module USER'S MANUAL MODEL: JUSP-NS600 YASKAWA MANUAL NO. SIE-C718-9 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication

More information

Operating Instructions

Operating Instructions 4XH35QB151210 Small General Frequency Converter Operating Instructions 220V 0.75KW 5.5KW 400V 0.75KW 15KW Please read the instruction carefully and understand the contents so that it can be installed and

More information

USER S MANUAL. OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw)

USER S MANUAL. OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw) USER S MANUAL OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw) Thank you for choosing this OMNUC U-series product. Proper use and handling

More information

FREQUENCY INVERTER VFR-013 QUICK START GUIDE

FREQUENCY INVERTER VFR-013 QUICK START GUIDE FREQUENCY INVERTER VFR-013 QUICK START GUIDE Inoréa Automation & Industry 9 rue du Lugan 33130 BEGLES www.inorea.com Table of contents 1. PEOPLE SAFETY... 3 2. MATERIAL SAFETY... 3 3. NAME PLATE... 4 a.

More information

13. Before making a service call Trip information and remedies

13. Before making a service call Trip information and remedies . Before making a service call Trip information and remedies.1 Trip causes/warnings and remedies When a problem arises, diagnose it in accordance with the following table. If it is found that replacement

More information

Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK

Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK YASKAWA YASKAWA MANUAL NO. SIE-S800-32.4 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved.

More information

PSF-520 Instruction Manual

PSF-520 Instruction Manual Communication software for HA-520/HA-680 Series PSF-520 Instruction Manual Thank you for implementing our AC servo driver HA-520, HA-680 series. The PSF-520 software sets various parameters and checks

More information

No Gain Tuning. Hunting. Closed Loop System

No Gain Tuning. Hunting. Closed Loop System 2 No Gain Tuning Conventional servo systems, to ensure machine performance, smoothness, positional error and low servo noise, require the adjustment of its servo s gains as an initial crucial step. Even

More information

Chapter 8 Troubleshooting

Chapter 8 Troubleshooting Chapter -1 Error Processing... -1 Preliminary Checks When a Problem Occurs...-1 Precautions When...-2 Replacing the Servomotor and Servo Drive...-2-2 Alarm Table... -3-3... -7 Error Diagnosis Using the

More information

Integrated servo motor

Integrated servo motor R88E-AECT@, R88S-EAD@ Integrated servo motor Motor and drive integrated for space optimization Wide range of motors from 2.55 Nm to 25 Nm 3000 rpm rated speed Peak torque 300% of rated torque IP65 protection

More information

MDS-CH-SP PLG Adjustment(BNP-B H)

MDS-CH-SP PLG Adjustment(BNP-B H) MELDAS Series MDS-CH-SP PLG Adjustment(BNP-B8827-016H) USA-99671-024* MITSUBISHI ELECTRIC AUTOMATION USA List of Revisions Rev Date of Revision Detail Author * 05/3/04 First Edition Created TSS AC SPINDLE

More information

Max. sp Min. spe Negativ speed s Synchro out speed refere selection Menu 13. g t x (-1) UMV 4301

Max. sp Min. spe Negativ speed s Synchro out speed refere selection Menu 13. g t x (-1) UMV 4301 Réf. 335-4.33 / a -.98.5 X-.39 Synchro output speed reference Menu 3 Max. sp Min. spe Negativ speed s.4 Synchro out speed refere selection Menu 3 Skip frequency Skip width.29.3.3 g t Run Run FWD REV 27

More information

CHAPTER 8 PARAMETER SUMMARY

CHAPTER 8 PARAMETER SUMMARY CHAPTER PARAMETER SUMMARY Group 0: System Parameter VFD-V Series 00-00 Identity Code Based on the model type 00-01 Rated Current Display 00-02 Parameter Reset 00-03 00-04 Star-up Display of the Drive Definitions

More information

VFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps.

VFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps. VFD - D700 Series Specifications The latest low-cost variable speed control solution for centrifugal pumps. Built-in PID Control to maintain pressure, flow, measured value, and much more 125% overload

More information

New Servo Concept: Junma

New Servo Concept: Junma New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter

More information

Analog / Pulse Input Type

Analog / Pulse Input Type M0008424F TYPE S Analog / Pulse Input Type For Rotary Motor Details of the change history The sixth edition (F) Safety precautions - i Corrected: the time from power supply shutdown to when operator starts

More information

Preface. Notes. Thank you for purchasing the VTP8 series AC drive.

Preface. Notes. Thank you for purchasing the VTP8 series AC drive. Preface Thank you for purchasing the VTP8 series AC drive. The VTP8 series AC drive is a general-purpose high-performance current vector control AC drive. It can implement the control of asynchronous motor.

More information

SGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10

SGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10 Quick Reference Guide SGDH Amplifier $ Document TRM--SGEN 9// V..4 Yaskawa Electric America Technical Training Services Part Number Guide Norman Dr. South Waukegan, IL 685-8-YASKAWA Fax: (847) 887-785

More information

(For Rotary Servomotors)

(For Rotary Servomotors) MECHATROLINK-III Communications Reference SERVOPACKs SGDV- E2 (For Rotary Servomotors) Designations S G D V - 2R9 E 2 A 002 00 0 v Series SGDV SERVOPACKs with DC Power Input st+2nd+ 3rd digits 4th digit

More information

Engineering Data AC Servo Drive HA-680

Engineering Data AC Servo Drive HA-680 Engineering Data AC Servo Drive HA-680 QUICKLINK www.harmonicdrive.de/1110 SAFETY GUIDE For FHA series, RSF series, HA series Read this manual thoroughly before designing the application, installation,

More information

TOSHIBA MACHINE CO., LTD.

TOSHIBA MACHINE CO., LTD. User s Manual Product SHAN5 Version 1.12 (V Series Servo Amplifier PC Tool) Model SFV02 July2005 TOSHIBA MACHINE CO., LTD. Introduction This document describes the operation and installation methods of

More information

AC SERVO MR-J2-CT Series

AC SERVO MR-J2-CT Series CNC AC SERVO MR-J2-CT Series SPECIFICATIONS AND INSTRUCTION MANUAL BNP-B3944E(ENG) Introduction Thank you for purchasing the Mitsubishi NC. This instruction manual describes the handling and caution points

More information

Series SGDH Indexer Application Module USER'S MANUAL

Series SGDH Indexer Application Module USER'S MANUAL YASKAWA Series SGDH Indexer Application Module USER'S MANUAL MODEL: JUSP-NS600 YASKAWA MANUAL NO. SIE-C718-9B Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication

More information

MSS-D - AC SERVO SYSTEMS

MSS-D - AC SERVO SYSTEMS MSS-D - AC SERVO SYSTEMS USER MANUAL (V1.11) MasterDrive Contents HOW TO READ THE PARAMETERS?... 6 SAFETY NOTICE... 7 CHAPTER 1 PRODUCT INTRODUCTION... 11 1.1 PRODUCT INSPECTIONS... 11 1.2 PRODUCT MODEL

More information

SmartStep Series

SmartStep Series R7D-AP@, R7M-A@ SmartStep Series A new concept in Servo The Smart alternative to Stepper motors Easy to setup, easy to operate. SmartStep is as easy to use as a stepper motor Front-panel switches make

More information

ServoPac-A TTA-PRO Positioner

ServoPac-A TTA-PRO Positioner Application note April 1st, 2010 ServoPac-A TTA-PRO Positioner Hiperface/Endat absolute encoder feedback 1) INTRODUCTION This application note is dedicated to the commissioning of ServoPac-A range drives

More information

USER'S MANUAL. Series SGMBH/SGDM/SGDH YASKAWA. AC Servodrive (200 V, 22 to 37 kw) (400 V, 22 to 55 kw) SGMBH Servomotor SGDM/SGDH SERVOPACK YASKAWA

USER'S MANUAL. Series SGMBH/SGDM/SGDH YASKAWA. AC Servodrive (200 V, 22 to 37 kw) (400 V, 22 to 55 kw) SGMBH Servomotor SGDM/SGDH SERVOPACK YASKAWA Series SGMBH/SGDM/SGDH USER'S MANUAL AC Servodrive (200 V, 22 to 37 kw) (400 V, 22 to 55 kw) SGMBH Servomotor SGDM/SGDH SERVOPACK YASKAWA YASKAWA MANUAL NO. SIE-S800-32.4B Copyright 2002 YASKAWA ELECTRIC

More information

AC Servo Drive DYN3 Series. User Manual

AC Servo Drive DYN3 Series. User Manual AC Servo Drive DYN3 Series User Manual Rev. 1.14b December, 2012 About This Manual Thank you for purchasing the DYN3-Series AC Servo drive from DMM Technology Corp. Before the servo drive is installed

More information

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH CHARGE NS A R C N B C N 4 XD-@, XD-@-E Intelligent servo drive. Integrated controller and network connectivity. NCT. Patented non-linear algorithm for tight control Very low tracking error with no overshoot

More information

Ambient Conditions Storage Conditions Installation Minimum Clearances and Air Flow...2 3

Ambient Conditions Storage Conditions Installation Minimum Clearances and Air Flow...2 3 CHAPTER INSTALLATION 2 AND WIRING Contents of this Chapter... Ambient Conditions..............................2 2 Storage Conditions...............................2 2 Installation.....................................2

More information

JBus/Modbus Communication Card

JBus/Modbus Communication Card JBus/Modbus Communication Card Installation and Operation 05/2018 www.schneider-electric.com Legal Information The Schneider Electric brand and any registered trademarks of Schneider Electric Industries

More information

Contents. Goodrive10 inverters

Contents. Goodrive10 inverters Goodrive10 Series Mini Inver ter Contents Contents Contents... 1 1 Safety Precautions... 2 1.1 Safety definition... 2 1.2 Warning symbols... 2 1.3 Safety guidelines... 2 2 Product overview... 5 2.1 Quick

More information

Troubleshooting and Maintenance

Troubleshooting and Maintenance 6 In This Chapter... page... 2 Monitoring Trip Events, History, & Conditions.. 5 Restoring Factory Default Settings... 8 Maintenance and Inspection... 9 Warranty... 16 6 2 Safety Messages Please read the

More information

TECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection

TECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection Quick Start Guide TECO F510 Inverter This guide is to assist you in installing and running the inverter and verify that it is functioning correctly for it s main and basic features. For detailed information

More information

V&T Technologies Co., Ltd. Vectorque TM V6-H-M1 SERIES INVERTER ADDITIVE MANUAL (M1) V6-H Series ADDITIVE MANUAL V& T

V&T Technologies Co., Ltd.   Vectorque TM V6-H-M1 SERIES INVERTER ADDITIVE MANUAL (M1) V6-H Series ADDITIVE MANUAL V& T Vectorque TM V6-H-M1 SERIES INVERTER ADDITIVE MANUAL (M1) V6-H Series ADDITIVE MANUAL V& T Change Scope Increase control function of vector control 2 with encoder speed feedback to support machine tool

More information

2HSS858H Low Voltage Digital Stepper Servo Drive Manual

2HSS858H Low Voltage Digital Stepper Servo Drive Manual 2HSS858H Low Voltage Digital Stepper Servo Drive anual Email:info@jmc-motion.com Address: Floor2, Building A, Hongwei Industrial Zone No.6, Liuxian 3rd Road, Shenzhen. China Shenzhen Just otion Control

More information

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001 AC SERVO DRIVES SERIES Servopacks Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202 CONTENTS SERVOPACKs Single-axis Analog Voltage/Pulse Train Reference SERVOPACKs 326 Single-axis MECHATROLINK-II

More information

MASTER/SLAVE TENSION CONTROL

MASTER/SLAVE TENSION CONTROL OPERATING MANUAL SERIES SMTBD1 OPTIONAL FUNCTIONS (Version 2.0) European version 2.0 MASTER/SLAVE TENSION CONTROL OPTION E This manual describes the option "E" of the SMT-BD1 amplifier: Master / Slave

More information

MR-J4-DU_B_-LL SERVO AMPLIFIER INSTRUCTION MANUAL

MR-J4-DU_B_-LL SERVO AMPLIFIER INSTRUCTION MANUAL General-Purpose AC Servo SSCNET /H Interface AC Servo for Pressure Control MODEL (SERVO AMPLIFIER) MR-J4-_B_-LL MODEL (DRIVE UNIT) MR-J4-DU_B_-LL SERVO AMPLIFIER INSTRUCTION MANUAL Safety Instructions

More information

USER'S MANUAL Design and Maintenance

USER'S MANUAL Design and Maintenance AC Servo Drives DC Power Input Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-III Communications Reference SGMMV Servomotor SGDV SERVOPACK Outline SigmaWin+ Wiring and Connection

More information

SV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications

SV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications 24 to 60 VDC input 10 A cont., 20 A peak output current Compact size for multi-axis applications Ideal for OEMs Designed for use with J Series motors Wide range of control options 8 regular digital inputs,

More information

Copyright / Trademarks -This manual and its contents are copyrighted. -You may not copy this manual,in whole or part,without written consent of

Copyright / Trademarks -This manual and its contents are copyrighted. -You may not copy this manual,in whole or part,without written consent of Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly, read this User s Manual thoroughly before use. Make sure

More information

STEPPING MOTOR EMULATION

STEPPING MOTOR EMULATION OPERATING MANUAL SERIES SMTBD1 OPTIONAL FUNCTIONS (Version 2.0) European version 2.0 STEPPING MOTOR EMULATION OPTION C This manual describes the option "C" of the SMT-BD1 amplifier: Stepping motor emulation.

More information

Maxsine AC SERVO. EP100 QuickGuide. Maxsine Electric Co.,Ltd

Maxsine AC SERVO. EP100 QuickGuide. Maxsine Electric Co.,Ltd Maxsine EP100 QuickGuide AC SERVO Maxsine Electric Co.,Ltd 1.1 Standard wiring Position control Maxsine EP100(B) SERVO DRIVER SERVOMOTOR 3 Phase AC220V NFB MC PE R S T r CN2 U V W PE 14 5V 2 3 4 1 4 Pins

More information

INDEX. i 1. B Braking Resistor Dimensions: A 24 Braking Resistors: A 20 Braking Units: A 20. DURAPULSE AC Drive User Manual

INDEX. i 1. B Braking Resistor Dimensions: A 24 Braking Resistors: A 20 Braking Units: A 20. DURAPULSE AC Drive User Manual INDEX A AC Drive Cover: 1 6 Dimensions: 2 4 External Parts and Labels: 1 6 Heat Sink Fins: 1 6 Input Mode Switch (Sink/Source): 1 6 Introduction to DuraPulse GS3 AC drive: 1 3 Keypad: 1 6 Model Number

More information

Operating Manual.

Operating Manual. Operating Manual www.fastech.co.kr FASTECH Co.,Ltd. Table of Contents 1. Precautions 2. Main characteristics 3. Drive Specification and Dimension 4. Motor Specification and Size 4.1 Ezi-SERVO-BT-42 Series

More information

α α Retry count clear Alarm reset Active End of retry S-curve time during accelerati on H04: (Count) setting S curve time during decelerati on

α α Retry count clear Alarm reset Active End of retry S-curve time during accelerati on H04: (Count) setting S curve time during decelerati on Upon success of retry Alarm Occurrence Disappearance Time S-curve acceleration/deceleration To reduce the shock of the mechanical system, the change in the output frequency is made smooth when the frequency

More information

NX Series Inverters. HVAC Pocket Programming Guide

NX Series Inverters. HVAC Pocket Programming Guide NX Series Inverters HVAC Pocket Programming Guide HVAC Pocket Programming Guide HVAC Pocket Programming Guide / Contents This guide provides a single reference document for the user of NXL HVAC (product

More information

DEFINITION OF WARNING, CAUTION, AND NOTE

DEFINITION OF WARNING, CAUTION, AND NOTE α B 6515E/3 DEFINITION OF WARNING, CAUTION, AND NOTE DEFINITION OF WARNING, CAUTION, AND NOTE This manual includes safety precautions for protecting the user and preventing damage to the machine. Precautions

More information

TOSVERT TM VF-nC3 Parameter List

TOSVERT TM VF-nC3 Parameter List TOSVERT TM VF-nC Parameter List E658664 - Setting information * Please fill it in if necessary. Item Content Item Content Setting date / person Customer Application Application model Motor manufacturer

More information

Cat. No. I534-E1-01 OPERATION MANUAL SMARTSTEP A SERIES. MODELS (Servomotors) (Servo Drivers) Servomotors/Servo Drivers

Cat. No. I534-E1-01 OPERATION MANUAL SMARTSTEP A SERIES. MODELS (Servomotors) (Servo Drivers) Servomotors/Servo Drivers Cat. No. I534-E1-01 OPERATION MANUAL SMARTSTEP A SERIES MODELS R7M-A@ (Servomotors) R7D-AP@ (Servo Drivers) Servomotors/Servo Drivers Thank you for choosing this SMARTSTEP A-series product. Proper use

More information

MR-J4-_B-RJ010 MR-J4-_B4-RJ010 MR-J3-T10 SERVO AMPLIFIER INSTRUCTION MANUAL. General-Purpose AC Servo

MR-J4-_B-RJ010 MR-J4-_B4-RJ010 MR-J3-T10 SERVO AMPLIFIER INSTRUCTION MANUAL. General-Purpose AC Servo General-Purpose AC Servo CC-Link IE Field Network interface with Motion MODEL (Servo amplifier) MR-J4-_B-RJ010 MR-J4-_B4-RJ010 MODEL (CC-Link IE Field Network interface unit) MR-J3-T10 SERVO AMPLIFIER

More information

Servo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:

Servo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description: Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control

More information

Content. Goodrive20 inverters

Content. Goodrive20 inverters Goodrive20 Series Inver ter Content Content Content... 1 1 Safety Precautions... 2 1.1 Safety definition... 2 1.2 Warning symbols... 2 1.3 Safety guidelines... 2 2 Product Overview... 5 2.1 Quick start-up...

More information

USER S MANUAL. AC Servo Drives -V-SD Series. Speed Reference with Analog Voltage Expanded Functions

USER S MANUAL. AC Servo Drives -V-SD Series. Speed Reference with Analog Voltage Expanded Functions AC Servo Drives -V-SD Series USER S MANUAL Speed Reference with Analog Voltage Expanded Functions CACR-JU E SERVOPACK CACP-JU 3 Power Regeneration Converter UAK J- CZ Spindle Motor Outline Compatible Devices

More information

DORNA EPS-B2 SERIES USER MANUAL AC SERVO SYSTEMS (V1.05) 1

DORNA EPS-B2 SERIES USER MANUAL AC SERVO SYSTEMS (V1.05)  1 DORNA AC SERVO SYSTEMS EPS-B2 SERIES USER MANUAL (V1.05) http://en.dorna.com.cn 1 Contents HOW TO READ THE PARAMETERS?... 6 SAFETY NOTICE... 7 CHAPTER 1 PRODUCT INTRODUCTION... 11 1.1 PRODUCT INSPECTIONS...

More information

SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications

SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications Copyright 2004 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a

More information

MITSUBISHI General-Purpose AC Servo D-S24 MR-J2- Specifications BCN-B

MITSUBISHI General-Purpose AC Servo D-S24 MR-J2- Specifications BCN-B MITSUBISHI General-Purpose AC Servo MR-J2- Specifications D-S24-1 - CHANGE Rev. Contents Drawn by - 2 - CTENTS 1. OUTLINE 2. SPECIFICATIS 3. CNECTI 4. I/O SIGNALS 5. OPERATI SEQUENCE 6. DISPLAY 7. PARAMETERS

More information

DORNA EPS-B1 SERIES USER MANUAL AC SERVO SYSTEMS (V1.11) 1

DORNA EPS-B1 SERIES USER MANUAL AC SERVO SYSTEMS (V1.11)  1 DORNA AC SERVO SYSTEMS EPS-B1 SERIES USER MANUAL (V1.11) http://en.dorna.com.cn 1 Contents HOW TO READ THE PARAMETERS?... 6 SAFETY NOTICE... 7 CHAPTER 1 PRODUCT INTRODUCTION... 11 1.1 PRODUCT INSPECTIONS...

More information

Drive CM User Manual

Drive CM User Manual The Best Choice for the Most Benefit! At LS Mecapion, we are committed to providing premium benefits to all of our customers. Drive CM User Manual Servo Configuration Tool Ver. 1.0 Safety Precautions -

More information

Position Table Function. Closed Loop System. Network Based Motion Control. No Gain Tuning

Position Table Function. Closed Loop System. Network Based Motion Control. No Gain Tuning 2 2 Position Table Function Position Table can be used for motion control by digital input and output signals of host controller. You can operate the motor directly by sending the position table number,

More information

Product Discontinuation Notices. Discontinuation Notice of AC Servomotors/drivers. OMNUC U series

Product Discontinuation Notices. Discontinuation Notice of AC Servomotors/drivers. OMNUC U series PRODUCT NEWS Product Discontinuation Notices March 2, 2009 Servomotors/Servo Drivers No.2009091E Discontinuation Notice of AC Servomotors/drivers. OMNUC U series Product Discontinuation Recommended Replacement

More information

User Manual for EL5 Servo

User Manual for EL5 Servo User Manual for EL5 Servo www.leadshine.com 1 Introduction Thanks for purchasing Leadshine EL5-series AC servo drivers, this instruction manual provides knowledge and attention for using this driver. Incorrect

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

Flying Shear Servo Solutions

Flying Shear Servo Solutions Flying Shear Servo Solutions Shenzhen Veichi Electric Co., Ltd. is a high-tech enterprise that is professionally engaged in the development,manufacturing and marketing of industrial automation control

More information

RDV-X/RDV-P Robot driver Only for pulse train control

RDV-X/RDV-P Robot driver Only for pulse train control Single axis Robot driver Only for pulse train control As the size is small and weight is light, it is easy to use in automated machinery. Features 1 Dedicated pulse train control The dedicated pulse train

More information

S11 Adjustable Speed Drive Engineering Specification

S11 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

CHAPTER 3 WIRING DANGER

CHAPTER 3 WIRING DANGER CHAPTER WIRING DANGER Hazardous Voltage Before accessing the AC drive: Disconnect all power to the AC drive. Wait five minutes for DC bus capacitors discharge. Any electrical or mechanical modification

More information

Preface. Thank you very much for purchasing DELTA s AC servo products.

Preface. Thank you very much for purchasing DELTA s AC servo products. Preface Thank you very much for purchasing DELTA s AC servo products. This manual will be helpful in the installation, wiring, inspection, and operation of Delta AC servo drive and motor. Before using

More information

Analog / Pulse Input Type

Analog / Pulse Input Type M0008424E TYPE S Analog / Pulse Input Type For Rotary Motor Details of the change history The third edition (C) Page ⅱ Safety precautions when using Safe Torque Off function is added. Page 1-1 Explanation

More information

MSI 10 Inverter MasterDrive

MSI 10 Inverter MasterDrive MSI 10 Inverter MasterDrive 2 MSI 10 inverter MasterDrive 3 Content Content... 4 1 Safety Precautions... 5 1.1 Safety definition... 5 1.2 Warning symbols... 5 1.3 Safety guidelines... 5 2 Product overview...

More information

Latest Control Technology in Inverters and Servo Systems

Latest Control Technology in Inverters and Servo Systems Latest Control Technology in Inverters and Servo Systems Takao Yanase Hidetoshi Umida Takashi Aihara. Introduction Inverters and servo systems have achieved small size and high performance through the

More information

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.

For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications. Current Transducer IT 700-S ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)

More information