SAR Test Report. Attestation of Global Compliance(Shenzhen) Co., Ltd.

Transcription

1 Page 1 of 130 SAR Test Report Report No.: AGC EH01 PRODUCT DESIGNATION : Smart Phone BRAND NAME : CUBOT MODEL NAME : R9 MANUFACTURER : Shenzhen Huafurui Technology Co., Ltd. DATE OF ISSUE : June 19,2017 STANDARD(S) : EN 50360:2001+A1:2012; EN : 2006; IEC : 2005; EN :2010; IEC :2010; EN 50566:2013 ; REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

2 Page 2 of 130 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / June 19,2017 Valid Original Report

3 Page 3 of 130 Test Report Certification Manufacturer Name Manufacturer Address Factory Name Factory Address Product Designation Brand Name Model Name Different Description Shenzhen Huafurui Technology Co., Ltd. Unit 1401 &1402, 14/F, Jin qi zhi gu mansion (No. 4 building of Chong wen Garden), Crossing of the Liu xian street and Tang ling road, Tao yuan street, Nan shan district, Shenzhen, P.R. China Shenzhen Huafurui Technology Co., Ltd. Unit 1401 &1402, 14/F, Jin qi zhi gu mansion (No. 4 building of Chong wen Garden), Crossing of the Liu xian street and Tang ling road, Tao yuan street, Nan shan district, Shenzhen, P.R. China Smart Phone CUBOT R9 N/A EUT Voltage Applicable Standard DC3.8V by battery EN 50360:2001+A1:2012; EN : 2006; IEC : 2005; EN :2010; IEC :2010; EN 50566:2013 ; Test Date June 7,2017 to June 13,2017 Performed Location Attestation of Global Compliance(Shenzhen) Co., Ltd. 2 F, Building 2, No.1-No.4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang Street, Bao'an District, Shenzhen, China Report Template AGCRT-EC-3G/SAR ( ) Tested By Owen Xiao (Xiao Qi) June 13,2017 Checked By Angela Li(Li Jiao) June 19,2017 Authorized By Forrest Lei(Lei Yonggang) Authorized Officer June 19,2017

4 Page 4 of 130 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE GENERAL INFORMATION EUT DESCRIPTION SAR MEASUREMENT SYSTEM THE DASY5 SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS DASY5 E-FIELD PROBE DATA ACQUISITION ELECTRONICS DESCRIPTION ROBOT LIGHT BEAM UNIT DEVICE HOLDER MEASUREMENT SERVER PHANTOM SAR MEASUREMENT PROCEDURE SPECIFIC ABSORPTION RATE (SAR) SAR MEASUREMENT PROCEDURE TISSUE SIMULATING LIQUID THE COMPOSITION OF THE TISSUE SIMULATING LIQUID TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS TISSUE CALIBRATION RESULT SAR SYSTEM CHECK PROCEDURE SAR SYSTEM CHECK PROCEDURES SAR SYSTEM CHECK EUT TEST POSITION DEFINE TWO IMAGINARY LINES ON THE HANDSET CHEEK POSITION TILT POSITION BODY WORN POSITION SAR EXPOSURE LIMITS TEST EQUIPMENT LIST MEASUREMENT UNCERTAINTY CONDUCTED POWER MEASUREMENT TEST RESULTS SAR TEST RESULTS SUMMARY APPENDIX A. SAR SYSTEM CHECK DATA APPENDIX B. SAR MEASUREMENT DATA APPENDIX C. TEST SETUP PHOTOGRAPHS APPENDIX D. CALIBRATION DATA

5 Page 5 of SUMMARY OF MAXIMUM SAR VALUE The maximum results of Specific Absorption Rate (SAR) found during testing for EUT are as follows: Frequency Band Highest Reported 10g-SAR(W/Kg) SAR Test Limit Head Body-worn(with 5mm separation) (W/Kg) GSM DCS WCDMA Band I WCDMA Band VIII WIFI 2.4G Simultaneous Reported SAR SAR Test Result PASS This device is compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (2.0W/Kg).

6 Page 6 of GENERAL INFORMATION 2.1. EUT Description General Information Product Designation Test Model Hardware Version Software Version Device Category RF Exposure Environment Antenna Type Smart Phone R9 WD395B_MB_V1.0 CUBOT_6143C_CHEETAH_2_V13_ Portable Uncontrolled Internal GSM and GPRS&EGPRS Support Band GSM 850 GSM 900 DCS 1800 PCS 1900 GPRS & EGPRS Type GPRS & EGPRS Class TX Frequency Range RX Frequency Range Release Version Type of modulation Antenna Gain Max. Average Power Class B Class 12(1Tx+4Rx, 2Tx+3Rx, 3Tx+2Rx, 4Tx+1Rx) GSM900: MHz ; DCS1800: MHz GSM900: MHz ; DCS1800: MHz R99 GMSK for GSM/GPRS; GMSK & 8-PSK for EGPRS GSM900:-2.25dBi; DCS1800:-1.51dBi GSM900:31.56dBm; DCS1800:28.62dBm Bluetooth Bluetooth Version V2.0 V2.1 V2.1+EDR V3.0 V3.0+HS V4.0 V4.1 Operation Frequency 2402~2480MHz Type of modulation GFSK /4-DQPSK 8-DPSK EIRP Antenna Gain 2.68dBm 0.82dBi

7 Page 7 of 130 EUT Description( Continue) WCDMA Support Band HS Type TX Frequency Range RX Frequency Range Release Version Type of modulation Antenna Gain Max. Average Power UMTS FDD Band I UMTS FDD Band II HSPA(HSUPA/HSDPA) UMTS FDD Band VIII UMTS FDD Band V FDD Band I : MHz; FDD Band VIII : MHz FDD Band I : MHz; FDD Band VIII : MHz Rel-6 HSDPA:QPSK/16QAM; HSUPA:BPSK; WCDMA:QPSK Band I: -0.98dBi ; Band VIII: -2.05dBi Band I:23.85dBm; Band VIII:23.56dBm WIFI WIFI Specification a b g n(20) n(40) Operation Frequency EIRP Antenna Gain 2412~2472MHz 11b:16.17dBm,11g:13.88dBm,11n(20):13.83dBm,11n(40):13.74dBm 0.82dBi Li-ion Battery Brand Name Model Name CUBOT R9 Manufacturer Name Manufacturer Address Capacitance Rated Voltage/ Charging Voltage Shenzhen Chuangkeyuan Electronic Technology Co., Ltd. Room2006, 20/F, Henggang Plaza, Longgang Road, Longgang District, Shenzhen 2400mAh DC3.8V/ DC4.35V Note: The sample used for testing is end product.

8 Page 8 of SAR MEASUREMENT SYSTEM 3.1. The DASY5 system used for performing compliance tests consists of following items A standard high precision 6-axis robot with controller, teach pendant and software. Data acquisition electronics (DAE) which attached to the robot arm extension. The DAE consist of a highly sensitive electrometer-grade preamplifier with auto-zeroing, a channel and gain-switching multiplexer, a fast 16 bit AD-converter and a command decoder with a control logic unit. Transmission to the measurement server is accomplished through an optical downlink for data and status information, as well as an optical uplink for commands and the clock A dosimetric probe equipped with an optical surface detector system. The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the digital Communication to the DAE. To use optical surface detection, a special version of the EOC is required. The EOC signal is transmitted to the measurement server. A Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe positioning. A computer running WinXP and the DASY5 software. Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps, etc. Phantoms, device holders and other accessories according to the targeted measurement.

9 Page 9 of DASY5 E-Field Probe The SAR measurement is conducted with the dosimetric probe manufactured by SPEAG. The probe is specially designed and calibrated for use in liquid with high permittivity. The dosimetric probe has special calibration in liquid at different frequency. SPEAG conducts the probe calibration in compliance with international and national standards (e.g. EN62209, IEC 62209, etc.)under ISO17025.The calibration data are in Appendix D. Isotropic E-Field Probe Specification Model Manufacture frequency Dynamic Range Dimensions ES3DV3 SPEAG 0.15GHz-3 GHz Linearity:±0.2dB(150MHz-3 GHz) 0.01W/Kg-100W/Kg Linearity:±0.2dB Overall length:337mm Tip diameter:4mm Typical distance from probe tip to dipole centers:2mm Application High precision dosimetric measurements in any exposure scenario (e.g., very strong gradient fields). Only probe which enables compliance testing for frequencies up to 3 GHz with precision of better 30% Data Acquisition Electronics description The data acquisition electronics (DAE) consist if a highly sensitive electrometer-grade preamplifier with auto-zeroing, a channel and gain-switching multiplexer, a fast 16 bit AD-converte and a command decoder with a control logic unit. Transmission to the measurement sever is accomplished through an optical downlink fir data and status information, as well as an optical uplink for commands and the clock. The mechanical probe mounting device includes two different sensor systems for frontal and sideways probe contacts. They are used for mechanical surface detection and probe collision detection. DAE4 Input Impedance The Inputs 200MOhm Symmetrical and floating Common mode rejection above 80 db

10 Page 10 of Robot The DASY system uses the high precision robots (DASY5:TX60) type from Stäubli SA (France). For the 6-axis controller system, the robot controller version from is used. The XL robot series have many features that are important for our application: High precision (repeatability 0.02 mm) High reliability (industrial design) Jerk-free straight movements Low ELF interference (the closed metallic construction shields against motor control fields) 6-axis controller 3.5. Light Beam Unit The light beam switch allows automatic tooling of the probe. During the process, the actual position of the probe tip with respect to the robot arm is measured, as well as the probe length and the horizontal probe offset. The software then corrects all movements, such that the robot coordinates are valid for the probe tip. The repeatability of this process is better than 0.1 mm. If a position has been taught with an aligned prob.1 mm, even if the other probe has different dimensions. During probe rotations, the probe tip will keep its actual position. e, the same position will be reached with another aligned probe within 0

11 Page 11 of Device Holder The DASY device holder is designed to cope with different positions given in the standard. It has two scales for the device rotation (with respect to the body axis) and the device inclination (with respect to the line between the ear reference points). The rotation center for both scales is the ear reference point (EPR). Thus the device needs no repositioning when changing the angles. The DASY device holder has been made out of low-loss POM material having the following dielectric parameters: relative permittivity ε=3 and loss tangent δ = The amount of dielectric material has been reduced in the closest vicinity of the device, since measurements have suggested that the influence of the clamp on the test results could thus be lowered Measurement Server The measurement server is based on a PC/104 CPU board with CPU (DASY5: 400 MHz, Intel Celeron), chip-disk (DASY5: 128MB), RAM (DASY5: 128MB). The necessary circuits for communication with the DAE electronic box, as well as the 16 bit AD converter system for optical detection and digital I/O interface are contained on the DAYS I/O board, which is directly connected to the PC/104 bus of the CPU board. The measurement server performs all the real-time data evaluation for field measurements and surface detection, controls robot movements and handles safety operations.

12 Page 12 of PHANTOM SAM Twin Phantom The SAM twin phantom is a fiberglass shell phantom with 2mm shell thickness (except the ear region where shell thickness increases to 6mm). It has three measurement areas: Left head Right head Flat phantom The bottom plate contains three pair of bolts for locking the device holder. The device holder positions are adjusted to the standard measurement positions in the three sections. A white cover is provided to tap the phantom during off-periods to prevent water evaporation and changes in the liquid parameters. On the phantom top, three reference markers are provided to identify the phantom position with respect to the robot. ELI4 Phantom Flat phantom a fiberglass shell flat phantom with 2mm+/- 0.2 mm shell thickness. It has only one measurement area for Flat phantom

13 Page 13 of SAR MEASUREMENT PROCEDURE 4.1. Specific Absorption Rate (SAR) SAR is related to the rate at which energy is absorbed per unit mass in object exposed to a radio field. The SAR distribution in a biological body is complicated and is usually carried out by experimental techniques or numerical modeling. The standard recommends limits for two tiers of groups, occupational/controlled and occupational/uncontrolled, based on a person s awareness and ability to exercise control over his or her exposure. In general, occupational/controlled exposure limits are higher than the limits for general population/uncontrolled. The SAR definition is the time derivative (rate) of the incremental energy (dw) absorbed by (dissipated in) an incremental mass (dm) contained in a volume element (dv) of given mass density (ρ). The equation description is as below: SAR is expressed in units of Watts per kilogram (W/Kg) SAR can be obtained using either of the following equations: Where SAR E ζ ρ c h is the specific absorption rate in watts per kilogram; is the r.m.s. value of the electric field strength in the tissue in volts per meter; is the conductivity of the tissue in siemens per metre; is the density of the tissue in kilograms per cubic metre; is the heat capacity of the tissue in joules per kilogram and Kelvin; dt dt t = 0 is the initial time derivative of temperature in the tissue in kelvins per second

14 Page 14 of SAR Measurement Procedure Step 1: Power Reference Measurement The Power Reference Measurement and Power Drift Measurement are for monitoring the power drift of the device under test in the batch process. The minimum distance of probe sensors to surface is 2.7mm This distance cannot be smaller than the distance os sensor calibration points to probe tip as `defined in the probe properties, Step 2: Area Scan The Area Scan is used as a fast scan in two dimensions to find the area of high field values, before doing a fine measurement around the hot spot. The sophisticated interpolation routines implemented in DASY software can find the maximum locations even in relatively coarse grids. When an Area Scan has measured all reachable points, it computes the field maximal found in the scanned area, within a range of the global maximum. The range (in db) is specified in the standards for compliance testing. For example, a 2db range is required in IEEE Standard , EN and IEC62209 standards, whereby 3db is a requirement when compliance is assessed in accordance with the ARIB standard (Japan) If one Zoom Scan follows the Area Scan, then only the absolute maximum will be taken as reference. For cases where multiple maximum are detected, the number of Zoom Scan has to be increased accordingly. measure the SAR distribution within the phantom (area scan procedure). The SAR distribution is scanned along the inside surface of one side of the phantom head, at least for an area larger than the projection of the handset and antenna. The spatial grid step shall be less than 20 mm. The resolution accuracy can also be tested using the reference functions of If surface scanning is used, then the distance between the geometrical centre of the probe dipoles and the inner surface of the phantom shall be 8,0 mm or less (±1,0 mm). At all measurement points, the angle of the probe with respect to the line normal to the surface is recommended but not required to be less than 30. Step 3: Zoom Scan Zoom Scan are used to assess the peak spatial SAR value within a cubic average volume containing 1g and 10g of simulated tissue. The Zoom Scan measures points (refer to table below) within a cube whose base faces are centered on the maxima found in a preceding area scan job within the same procedure. When the measurement is done, the Zoom Scan evaluates the averaged SAR for 1g and 10g and displays these values next to the job s label. measure SAR with a grid step of 8 mm or less in a volume with a minimum size of 30 mm by 30 mm and 30 mm in depth (zoom scan procedure). The grid step in the vertical direction shall be 5 mm or less (see C.3.3). Separate grids shall be centred on each of the local SAR maxima found in step c). Step 4: Power Drift Measurement The Power Drift Measurement measures the field at the same location as the most recent power reference measurement within the same procedure, and with the same settings. The Power Drift Measurement gives the field difference in db from the reading conducted within the same settings. This allows a user to monitor the power drift of the device under test within a batch process. The measurement procedure is the same as Step 1.

15 5. TISSUE SIMULATING LIQUID Report No.: AGC EH01 Page 15 of 130 For SAR measurement of the field distribution inside the phantom, the phantom must be filled with homogeneous tissue simulating liquid to a depth of at least 15cm. For head SAR testing the liquid height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15cm For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15cm.The nominal dielectric values of the tissue simulating liquids in the phantom and the tolerance of 5% are listed in The composition of the tissue simulating liquid Ingredient (% Weight) Frequency (MHz) Water Nacl Sugar HEC Bactericide DGBE 1,2- Propanediol Triton X Tissue Dielectric Parameters for Head and Body Phantoms The head tissue dielectric parameters recommended by the EN/IEC have been incorporated in the following table. The body tissue dielectric parameters recommended by the EN/IEC have been incorporated in the following table. Target Frequency head body (MHz) εr σ (S/m) εr σ (S/m) (εr = relative permittivity, ζ = conductivity and ρ = 1000 kg/m3)

16 Page 16 of Tissue Calibration Result The dielectric parameters of the liquids were verified prior to the SAR evaluation using DASY5 Dielectric Probe Kit and R&S Network Analyzer ZVL6. Frequency Target Value Measurement Value Tissue Temp (MHz) εr δ[s/m] εr δ[s/m] [ o C] Test Date June 7, June 8, June 13, June 12,2017

17 Page 17 of SAR SYSTEM CHECK PROCEDURE 6.1. SAR System Check Procedures SAR system check is required to confirm measurement accuracy, according to the tissue dielectric media, probe calibration points and other system operating parameters required for measuring the SAR of a test device. The system verification must be performed for each frequency band and within the valid range of each probe calibration point required for testing the device. The same SAR probe(s) and tissue-equivalent media combinations used with each specific SAR system for system verification must be used for device testing. When multiple probe calibration points are required to cover substantially large transmission bands, independent system verifications are required for each probe calibration point. A system verification must be performed before each series of SAR measurements using the same probe calibration point and tissue-equivalent medium. Additional system verification should be considered according to the conditions of the tissue-equivalent medium and measured tissue dielectric parameters, typically every three to four days when the liquid parameters are remeasured or sooner when marginal liquid parameters are used at the beginning of a series of measurements. Each DASY system is equipped with one or more system check kits. These units, together with the predefined measurement procedures within the DASY software, enable the user to conduct the system check and system validation. System kit includes a dipole, and dipole device holder. The system check verifies that the system operates within its specifications. It s performed daily or before every SAR measurement. The system check uses normal SAR measurement in the flat section of the phantom with a matched dipole at a specified distance. The system check setup is shown as below.

18 Page 18 of SAR System Check Dipoles The dipoles used is based on the EN/IEC /2 standard, the table below provides details for the mechanical and electrical Specifications for the dipoles. The dipoles used is based on the EN/IEC /2 standard, the table below provides details for the mechanical and electrical Specifications for the dipoles. Frequency L (mm) h (mm) d (mm) 900 MHz MHz MHz MHz

19 Page 19 of System Check Result System Performance Check at 900 MHz &1800MHz&2000MHz& 2450MHz Validation Kit: SN 15/16DIP 0G & SN 29/15DIP 1G & SN29/15 DIP 2G & D2450V2-SN:968 Target Value(W/Kg) Reference Result (± 10%) Normalized to 1W(W/Kg) Tissue Temp. Test time 1g 10g 1g 10g 1g 10g [ C] June 7, June 8, June 13, June 12,2017 Frequency [MHz]

20 7. EUT TEST POSITION Report No.: AGC EH01 Page 20 of 130 This EUT was tested in Right Cheek, Right Tilted, Left Cheek, Left Tilted, Body back and Body front Define Two Imaginary Lines on the Handset (1)The vertical centerline passes through two points on the front side of the handset the midpoint of the width wt of the handset at the level of the acoustic output, and the midpoint of the width wb of the handset. (2)The horizontal line is perpendicular to the vertical centerline and passes through the center of the acoustic output. The horizontal line is also tangential to the face of the handset at point A. (3)The two lines intersect at point A. Note that for many handsets, point A coincides with the center of the acoustic output; however, the acoustic output may be located elsewhere on the horizontal line. Also note that the vertical centerline is not necessarily to the front face of the handset, especially for clamshell handsets, handsets with flip covers, and other irregularly shaped handsets.

21 Page 21 of Cheek Position (1) To position the device with the vertical center line of the body of the device and the horizontal line crossing the center picec in a plane parallel to the sagittal plane of the phantom. While maintaining the device in this plane, align the vertical center line with the reference plane containing the ear and mouth reference point (M: Mouth, RE: Right Ear, and LE: Left Ear) and align the center of the ear piece with the line RE-LE. (2) To move the device towards the phantom with the ear piece aligned with the the line LE-RE until the phone touched the ear. While maintaining the device in the reference plane and maintaining the phone contact with ear, move the bottom of the phone until any point on the front side is in contact with the cheek of the phantom or until contact with the ear is lost 7.3. Tilt Position (1) To position the device in the cheek position described above. (2) While maintaining the device in the reference plane described above and pivoting against the ear, moves it outward away from the mouth by an angle of 15 degrees or until with the ear is lost.

22 Page 22 of Body Worn Position (1) To position the EUT parallel to the phantom surface. (2) To adjust the EUT parallel to the flat phantom. (3) To adjust the distance between the EUT surface and the flat phantom to 5mm.

23 8. SAR EXPOSURE LIMITS Report No.: AGC EH01 Page 23 of 130 Limits for General Population/Uncontrolled Exposure (W/kg) Type Exposure Uncontrolled Environment Limit (W/kg) Spatial Peak SAR (10 g cube tissue for brain or body) 2.00 Spatial Average SAR (Whole body) 0.08 Spatial Peak SAR (Limbs) 4.00

24 9. TEST EQUIPMENT LIST Report No.: AGC EH01 Page 24 of 130 Equipment Manufacturer/ Current Next calibration Identification No. description Model calibration date date Stäubli Robot Stäubli-TX60 F13/5Q2UD1/A/01 N/A N/A Robot Controller Stäubli-CS N/A N/A TISSUE Probe SATIMO SN 23/16 OCPG 75 07/05/ /04/2017 E-Field Probe Speag- ES3DV3 SN: /28/ /27/2017 SAM Twin Phantom Speag-SAM 1790 N/A N/A Device Holder Speag-SD 000 H01 KA SD 000 H01 KA N/A N/A DAE4 Speag-SD 000 D04 BM /19/ /18/2018 SAR Software Speag-DASY5 DASY52.8 N/A N/A Liquid SATIMO - N/A N/A Radio Communication R&S-CMU Y /02/ /01/2018 Tester Dipole SATIMO SID900 SN15/16 DIP 0G /05/ /04/2019 Dipole SATIMO SID1800 SN29/15 DIP 1G /05/ /04/2019 Dipole SATIMO SID2000 SN29/15 DIP 2G /05/ /04/2019 Dipole D2450V2 SN968 06/12/ /11/2018 Signal Generator Agilent-E4438C US /02/ /01/2018 Vector Analyzer Agilent / E4440A US /02/ /01/2017 Network Analyzer Rhode & Schwarz ZVL6 SN /02/ /01/2018 Attenuator Warison /WATT-6SR1211 N/A N/A N/A Attenuator Mini-circuits / VAT-10+ N/A N/A N/A Amplifier EM30180 SN /02/ /01/2018 Directional Werlatone/ Couple C SN /02/ /01/2017 Directional Werlatone/ Couple C SN /02/ /01/2017 Power Sensor NRP-Z /10/ /09/2017 Power Sensor NRP-Z23 US /02/ /01/2018 Power Viewer R&S V N/A N/A Note: Per EN/IEC /2 Dipole SAR Validation, AGC Lab has adopted 3 years calibration intervals. On annual basis, every measurement dipole has been evaluated and is in compliance with the following criteria: 1. There is no physical damage on the dipole; 2. System validation with specific dipole is within 10% of calibrated value; 3. Return-loss is within 20% of calibrated measurement; 4. Impedance is within 5Ω of calibrated measurement.

25 Page 25 of MEASUREMENT UNCERTAINTY The component of uncertainly may generally be categorized according to the methods used to evaluate them. The evaluation of uncertainly by the statistical analysis of a series of observations is termed a Type An evaluation of uncertainty. The evaluation of uncertainty by means other than the statistical analysis of a series of observation is termed a Type B evaluation of uncertainty. Each component of uncertainty, however evaluated, is represented by an estimated standard deviation, termed standard uncertainty, which is determined by the positive square root of the estimated variance. A Type A evaluation of standard uncertainty may be based on any valid statistical method for treating data. This includes calculating the standard deviation of the mean of a series of independent observations; using the method of least squares to fit a curve to the data in order to estimate the parameter of the curve and their standard deviations; or carrying out an analysis of variance in order to identify and quantify random effects in certain kinds of measurement. A type B evaluation of standard uncertainty is typically based on scientific judgment using all of the relevant information available. These may include previous measurement data, experience, and knowledge of the behavior and properties of relevant materials and instruments, manufacture s specification, data provided in calibration reports and uncertainties assigned to reference data taken from handbooks. Broadly speaking, the uncertainty is either obtained from an outdoor source or obtained from an assumed distribution, such as the normal distribution, rectangular or triangular distributions indicated in Table as follow. Uncertainty Distributions Multi-plying Factor(a) Normal Rectangular Triangular U-Shape 1/k(b) 1/ 3 1/ 6 1/ 2 (a) Standard uncertainty is determined as the product of the multiplying factor and the estimated range of variations in the measured quantity (b) κ is the coverage factor Table 13.1 Standard Uncertainty for Assumed Distribution (above table) The combined standard uncertainty of the measurement result represents the estimated standard deviation of the result. It is obtained by combining the individual standard uncertainties of both Type A and Type B evaluation using the usual root-sum-squares (RSS) methods of combining standard deviations by taking the positive square root of the estimated variances. Expanded uncertainty is a measure of uncertainty that defines an interval about the measurement result within which the measured value is confidently believed to lie. It is obtained by multiplying the combined standard uncertainty by a coverage factor. Typically, the coverage factor ranges from 2 to 3. Using a coverage factor allows the true value of a measured quantity to be specified with a defined probability within the specified uncertainty range. For purpose of this document, a coverage factor two is used, which corresponds to confidence interval of about 95 %. The DASY uncertainty Budget is shown in the following tables.

26 Page 26 of 130 DASY5 Uncertainty Measurement uncertainty for 150 MHz to 3GHz averaged over 1 gram / 10 gram. Uncertainty Component Sec. Tol Prob. 1g Ui Div. Ci (1g) Ci (10g) (+- %) Dist. (+-%) Measurement System 10g Ui (+-%) Probe calibration N Axial Isotropy R Hemispherical Isotropy R Linearity R Probe modulation R Detection limits R Boundary effect R Readout Electronics N Response Time R Integration Time R RF ambient Conditions-noise R RF ambient Conditions-reflections R Probe positioned mech. restrictions R Probe positioning with respect to phantom shell R Post-processing R Test sample related Device holder uncertainty N M-1 Test sample positioning N M-1 Power scaling L.3 0 R Drift of output power(measured SAR drift) R Phantom and set-up Phantom Uncertainty (Shape and thickness R tolerances) Algorithm for correcting SAR for deviations in N permittivity and conductivity Liquid conductivity (meas.) N M-1 Liquid permittivity (meas.) N M Liquid permittivity temperature uncertainty R Liquid conductivity temperature uncertainty R Combined Standard Uncertainty RSS Expanded Uncertainty (95% Confidence interval) k Vi

27 Page 27 of 130 Uncertainty Component Measurement System System validation for 150 MHz to 3GHz averaged over 1 gram / 10 gram. Sec. Tol (+- %) Prob. Dist. Div. Ci (1g) Ci (10g) 1g Ui (+-%) 10g Ui (+-%) Probe calibration N Axial Isotropy E R Hemispherical Isotropy E R Linearity R Probe modulation R Detection limits R Boundary effect R Readout Electronics N Response Time R Integration Time R RF ambient Conditions-noise R RF ambient Conditions-reflections R Probe positioned mech. restrictions R Probe positioning with respect to phantom shell R Post-processing R Field source Deviation of the experimental source from numerical source Source to liquid distance Drift of output power(measured SAR drift) Phantom and set-up N R R Phantom Uncertainty (Shape and thickness R tolerances) Algorithm for correcting SAR for deviations in N permittivity and conductivity Liquid conductivity (meas.) N M Liquid permittivity (meas.) N M Liquid permittivity temperature uncertainty R Liquid conductivity temperature uncertainty R Combined Standard Uncertainty RSS Expanded Uncertainty (95% Confidence interval) k Vi

28 Page 28 of 130 Uncertainty Component Measurement System System check for 150 MHz to 3GHz averaged over 1 gram / 10 gram. Sec. Tol (+- %) Prob. Dist. Div. Ci (1g) Ci (10g) 1g Ui (+-%) 10g Ui (+-%) Probe modulation R Detection limits R Boundary effect R Readout Electronics N Response Time R Integration Time R RF ambient Conditions-noise R RF ambient Conditions-reflections R Probe positioned mech. restrictions R Probe positioning with respect to phantom shell R Post-processing R Field source Deviation between experimental source Source to liquid distance Drift of output power(measured SAR drift) N R R Phantom and set-up Phantom Uncertainty (Shape and thickness R tolerances) Algorithm for correcting SAR for deviations in N permittivity and conductivity Liquid conductivity (meas.) N M Liquid permittivity (meas.) N M Liquid permittivity temperature uncertainty R Liquid conductivity temperature uncertainty R Combined Standard Uncertainty RSS Expanded Uncertainty (95% Confidence interval) k Vi

29 11. CONDUCTED POWER MEASUREMENT GSM BAND Mode Maximum Power <1> GSM 900 GPRS 900 (1 Slot) GPRS 900 (2 Slot) GPRS 900 (3 Slot) GPRS 900 (4 Slot) EGPRS 900 (1 Slot) EGPRS 900 (2 Slot) EGPRS 900 (3 Slot) EGPRS 900 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Report No.: AGC EH01 Page 29 of 130 Duty cycle Factor(dBm) Frame Power(dBm)

30 Page 30 of 130 Mode Maximum Power <2> GSM 900 GPRS 900 (1 Slot) GPRS 900 (2 Slot) GPRS 900 (3 Slot) GPRS 900 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Duty cycle Factor(dBm) Frame Power(dBm)

31 Page 31 of 130 Mode Maximum Power <1> DCS1800 GPRS1800 (1 Slot) GPRS1800 (2 Slot) GPRS1800 (3 Slot) GPRS1800 (4 Slot) EGPRS1800 (1 Slot) EGPRS1800 (2 Slot) EGPRS1800 (3 Slot) EGPRS1800 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Duty cycle Factor(dBm) Frame Power(dBm)

32 Page 32 of 130 Mode Maximum Power <2> DCS1800 GPRS1800 (1 Slot) GPRS1800 (2 Slot) GPRS1800 (3 Slot) GPRS1800 (4 Slot) Frequency(MHz) Avg. Burst Power(dBm) Duty cycle Factor(dBm) Frame Power(dBm) Note 1: The Frame Power (Source-based time-averaged Power) is scaled the maximum burst average power based on time slots. The calculated methods are show as following: Frame Power = Max burst power (1 Up Slot) 9 db Frame Power = Max burst power (2 Up Slot) 6 db Frame Power = Max burst power (3 Up Slot) 4.26 db Frame Power = Max burst power (4 Up Slot) 3 db Note 2: SAR is not required for GPRS (1 Slot) Mode because its output power is less than of Voice Mode

33 Page 33 of 130 UMTS BAND I Mode Frequency(MHz) Avg. Burst Power (dbm) WCDMA 2100 RMC(12.2kbps) HSDPA Subtest 1 HSDPA Subtest 2 HSDPA Subtest 3 HSDPA Subtest 4 HSUPA Subtest 1 HSUPA Subtest 2 HSUPA Subtest 3 HSUPA Subtest 4 HSUPA Subtest

34 Page 34 of 130 UMTS BAND VIII Mode Frequency (MHz) Avg. Burst Power (dbm) WCDMA 900 RMC(12.2kbps) HSDPA Subtest 1 HSDPA Subtest 2 HSDPA Subtest 3 HSDPA Subtest 4 HSUPA Subtest 1 HSUPA Subtest 2 HSUPA Subtest 3 HSUPA Subtest 4 HSUPA Subtest

35 Page 35 of 130 According to 3GPP sub-clause 6.2.2, the maximum output power is allowed to be reduced by following the table. Table 6.1Aa: UE maximum output power with HS-DPCCH and E-DCH UE Transmit Channel Configuration CM(db) MPR(db) For all combinations of,dpdch,dpcch HS-DPDCH,E-DPDCH and E-DPCCH 0 CM 3.5 MAX(CM-1,0) Note: CM=1 for c / d =12/15, hs / c =24/15.For all other combinations of DPDCH, DPCCH, HS-DPCCH, E-DPDCH and E-DPCCH the MPR is based on the relative CM difference. The device supports MPR to solve linearity issues (ACLR or SEM) due to the higher peak-to average ratios (PAR) of the HSUPA signal. This prevents saturating the full range of the TX DAC inside of device and provides a reduced power output to the RF transceiver chip according to the Cubic Metric (a function of the combinations of DPDCH, DPCCH, HS-DPCCH, E-DPDCH and E-DPCCH). When E-DPDCH channels are present the beta gains on those channels are reduced firsts to try to get the power under the allowed limit. If the beta gains are lowered as far as possible, then a hard limiting is applied at the maximum allowed level. The SW currently recalculates the cubic metric every time the beta gains on the E-DPDCH are reduced. The cubic metric will likely get lower each time this is done.however, there is no reported reduction of maximum output power in the HSUPA mode since the device also provides a compensation for the power back-off by increasing the gain of TX_AGC in the transceiver (PA) device. The end effect is that the DUT output power is identical to the case where there is no MPR in the device.

36 Page 36 of 130 WIFI Mode Data Rate (Mbps) Channel Frequency(MHz) EIRP (dbm) b g n(20) n(40)

37 Page 37 of TEST RESULTS SAR Test Results Summary Test position and configuration Head SAR was performed with the device configured in the positions according to IEC/EN , and Body SAR was performed with the device 5mm from the phantom according to IEC/EN Operation Mode 1 For GSM900, the power control is set to Maximum Power Class. For GPRS 900(GMSK, CS1), the power control level is set to Maximum Power Class. For E-GPRS 900(GMSK: MCS1, 8PSK:MCS5), the power control is set to Maximum Power Class. For DCS 1800, the power control is set to Maximum Power Class. For GPRS 1800(GMSK, CS1), the power control level is set to Maximum Power Class. For E-GPRS 1800 (GMSK: MCS1, 8PSK:MCS5), the power control level is set to Maximum Power Class. This is a multi-slot class 12 device capable of 4 uplink timeslots. During the head SAR test, the device was transmitting with maximum 1 uplink timeslot; during the body SAR test, it was transmitting with maximum 4 uplink timeslots. Additionally, this device doesn t support dual transfer mode (DTM) Testing with the headset was performed at the position and channels that resulted in the highest body SAR. This testing was performed with GPRS transmitting with 2/3/4 uplink timeslots. In the Body SAR test result table, body-worn means display of device down, body-front means display of device up. 2 For WCDMA, head and body SAR is tested under RMC 12.2k mode with power control set all up bits SAR for AMR is not required since its power is less than RMC. For HSDPA/HSUPA, SAR is test with its maximum power mode. 3 For WLAN SAR testing, the EUT has installed WLAN engineering testing software which can provide continuous transmitting RF signal. 4. Sensors have no any influence on RF power level or SAR result. 5.The portion of the device which area scan did not scan has been off the phantom.

38 Page 38 of Antenna Location: ( back view ) EUT Top Edge BT&WIFI& GPS Antenna EUT Right Edge EUT Left Edge GSM&WCDMA Antenna EUT Bottom Edge

39 Page 39 of SAR Test Results Summary SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 50.3 Product: Smart Phone Test Mode: GSM900 with GMSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±0.2) SAR (10g) (W/kg) Max. Tune-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek voice Left Cheek voice Left Cheek voice Left Tilt voice Right Cheek voice Right Tilt voice Body back voice Body back GPRS-2 slots Body back GPRS-3 slots Body back GPRS-4 slots Body Front GPRS-4 slots Body back +Ear. GPRS-4 slots Body back +Ear. GPRS-4 slots Body back +Ear. GPRS-4 slots SIM 2 Card Left Cheek voice Body back +Ear. GPRS-4 slots Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 5mm. Limit (W/Kg)

40 Page 40 of 130 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 53.6 Product: Smart Phone Test Mode: DCS1800 with GMSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±0.2) SAR (10g) (W/kg) Max. Tune-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek voice Left Tilt voice Right Cheek voice Right Cheek voice Right Cheek voice Right Tilt voice Body back voice Body back GPRS-2 slots Body back GPRS-2 slots Body back GPRS-2 slots Body back GPRS-3 slots Body back GPRS-4 slots Body Front GPRS-2 slots Body back +Ear. GPRS-2 slots SIM 2 Card Right Cheek voice Body back GPRS-2 slots Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 5mm. Limit (W/Kg)

41 Page 41 of 130 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 53.7 Product: Smart Phone Test Mode: WCDMA Band I with QPSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±0.2) SAR (10g) (W/kg) Max. Tune-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek RMC12.2kbps Left Cheek RMC12.2kbps Left Cheek RMC12.2kbps Left Tilt RMC12.2kbps Right Cheek RMC12.2kbps Right Tilt RMC12.2kbps Body back RMC12.2kbps Body front RMC12.2kbps Body back HSDPA Subtest Body back HSUPA Subtest Body back +Ear. RMC12.2kbps Body back +Ear. RMC12.2kbps Body back +Ear. RMC12.2kbps Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 5mm. Limit W/kg

42 Page 42 of 130 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%):50.3 Product: Smart Phone Test Mode: WCDMA Band VIII with QPSK modulation Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±0.2) SAR (10g) (W/kg) Max. Tune-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek RMC12.2kbps Left Tilt RMC12.2kbps Right Cheek RMC12.2kbps Right Cheek RMC12.2kbps Right Cheek RMC12.2kbps Right Tilt RMC12.2kbps Body back RMC12.2kbps Body back RMC12.2kbps Body back RMC12.2kbps Body front RMC12.2kbps Body back HSDPA Subtest Body back HSUPA Subtest Body back +Ear. RMC12.2kbps Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 5mm. Limit W/kg

43 Page 43 of 130 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 51.9 Product: Smart Phone Test Mode: b Position Mode Ch. SIM 1 Card Fr. (MHz) Power Drift (<±0.2) SAR (10g) (W/kg) Max. Tune-up Power (dbm) Meas. output Power (dbm) Scaled SAR (W/Kg) Left Cheek DTS Left Tilt DTS Right Cheek DTS Right Cheek DTS Right Cheek DTS Right Tilt DTS Body back DTS Body front DTS Body back +Ear. DTS Body back +Ear. DTS Body back +Ear. DTS Note: When the 10-g SAR is 1.0W/kg, testing for low and high channel is optional. The test separation of all above table(body part) is 5mm. Limit W/kg

44 Page 44 of 130 Simultaneous Multi-band Transmission Evaluation: According to EN :2010 section 6.3.2, when the EUT has more than one transmission mode, there need to take Simultaneous Multi-band Transmission into consideration; (1) The EUT has GSM/WCDMA antenna, BT /WIFI antenna; (2) BT and WIFI share one antenna, and cannot transmit simultaneously; (3) GSM and GPRS/WCDMA can t work at the same time; (4) For simultaneous transmission at head and body exposure position, 2 transmitters simultaneous transmission was the worst state; (5) For each transmission mode, there must test separately, and then summation of peak spatial-averaged SAR values; (6) For secondary transmitter (i.e. lower power transmitters), we use the following measurement to evaluate if their power levels fall below a threshold level(annex k): P available =P th,m (SAR lim -SAR 1 )/ SAR lim Where P th, m is the threshold exclusion power level; P available is the threshold value there need to be tested; SAR lim is the SAR limit; SAR 1 is the maximum SAR value of first transmitter mode result; Alternatively, P th,m can be replaced by P max, m, which is an easier approach but leads to more restrictive power threshold; P available =P th,m (SAR lim -SAR 1 )/ SAR lim =20mW (2W/Kg W/Kg)/ 2W/Kg =10.89mW>1.85mW(2.68dBm) for BT =10.89mW<41.40mW(16.17dBm) for WIFI There is no need to test BT ; and there is no need to evaluate simultaneous transmission. There is need to test WIFI; and there is need to evaluate simultaneous transmission. Simultaneous Multi-band Transmission SAR: NO Simultaneous state Portable Handset Head Body-worn 1 GSM(voice)+WLAN 2.4GHz (data) Yes Yes 2 GSM(Data)+WLAN 2.4GHz (data) Yes Yes 3 WCDMA(RMC12.2kbps)+WLAN 2.4GHz (data) Yes Yes

45 Page 45 of 130 Frequency GSM 900 DCS 1800 WCDMA Band I WCDMA Band VIII RF Exposure Conditions Head (voice) Body-worn Head (voice) Body-worn Head Body-worn Head Body-worn Simultaneous Transmission Test Σ10-g SAR Limit Scenario Position (W/Kg) (W/Kg) GSM/WCDMA WIFI Left Touch Left Tilt Right Touch Right Tilt Body back GPRS-2slots GPRS-3slots GPRS-4slots Body Front Earphone Left Touch Left Tilt Right Touch Right Tilt Body back GPRS-2slots GPRS-3slots GPRS-4slots Body Front Earphone Left Touch Left Tilt Right Touch Right Tilt Body back Body Front HSDPA HSUPA Earphone Left Touch Left Tilt Right Touch Right Tilt Body back Body Front HSDPA HSUPA Earphone

46 Page 46 of 130 APPENDIX A. SAR SYSTEM CHECK DATA Test Laboratory: AGC Lab Date: June 7,2017 System Check Head 900 MHz DUT: Dipole 900 MHz Type: SID 900 Communication System: CW; Communication System Band: D900 (900.0 MHz); Duty Cycle: 1:1; Frequency: 900 MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; Configuration/System Check 900MHz Head /Area Scan(9x14x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg Configuration/System Check 900MHz Head /Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.23 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

47 Page 47 of 130 Test Laboratory: AGC Lab Date: June 8,2017 System Check Head 1800MHz DUT: Dipole 1800 MHz; Type: SID 1800 Communication System: CW; Communication System Band: D1800 ( MHz); Duty Cycle: 1:1; Frequency: 1800 MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ):22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; Configuration/System Check 1800MHz Head/Area Scan (6x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.82 W/kg Configuration/System Check 1800MHz Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 4.31 W/kg SAR(1 g) = 2.40 W/kg; SAR(10 g) = 1.23 W/kg Maximum value of SAR (measured) = 2.99 W/kg

48 Page 48 of 130 Test Laboratory: AGC Lab Date: June 13,2017 System Check Head 2000MHz DUT: Dipole 2000 MHz; Type: SID 2000 Communication System: CW; Communication System Band: D2000 ( MHz); Duty Cycle: 1:1; Frequency: 2000 MHz; Medium parameters used: f = 2000 MHz; ζ=1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ):22.1, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; Configuration / System Check 2000MHz Head/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.10 W/kg Configuration / System Check 2000MHz Head/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 4.58 W/kg SAR(1 g) = 2.47 W/kg; SAR(10 g) = 1.29 W/kg Maximum value of SAR (measured) = 3.05 W/kg

49 Page 49 of 130 Test Laboratory: AGC Lab Date: June 12,2017 System Check Head 2450 MHz DUT: Dipole 2450 MHz Type: D2450V2 Communication System: CW; Communication System Band: D2450 ( MHz); Duty Cycle: 1:1; Frequency: 2450 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Flat Section; Input Power=18dBm Ambient temperature ( ): 21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; Configuration/System Check Head 2450MHz /Area Scan (8x11x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 4.23 W/kg Configuration/System Check Head 2450MHz /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = V/m; Power Drift = 0.07 db Peak SAR (extrapolated) = 6.71 W/kg SAR(1 g) = 3.22 W/kg; SAR(10 g) = 1.49 W/kg Maximum value of SAR (measured) = 4.92 W/kg

50 Page 50 of 130 APPENDIX B. SAR MEASUREMENT DATA Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 Low-Touch-Left <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz;ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; LEFT HEAD/L-C-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

51 Page 51 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 Mid-Touch-Left <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; T HEAD/L-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.19 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

52 Page 52 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 High-Touch-Left <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; LEFT HEAD/L-C-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.07 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

53 Page 53 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 Mid- Tilt-Left <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02 ; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; LEFT HEAD/L-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

54 Page 54 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 Mid -Touch-Right <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; RIGHT HEAD/R-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.15 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

55 Page 55 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 Mid-Tilt-Right <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02 ; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; RIGHT HEAD/R-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

56 Page 56 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 High-Touch-Left <SIM 2> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; LEFT HEAD/L-C-H 2/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C-H 2/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

57 Page 57 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GSM 900 Mid- Body- Back (MS) <SIM 1> Communication System: Generic GSM; Communication System Band: GSM 900; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/BACK/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.10 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

58 Page 58 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Mid- Body- Back (2up) <SIM 1> Communication System: GPRS -2 Slot; Communication System Band: GSM900; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/2ST/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/2ST/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.11 db Peak SAR (extrapolated) = 1.19 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

59 Page 59 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Mid-Body-Back (3up) <SIM 1> Communication System: GPRS -3 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.8 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/3ST/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/3ST/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.08 db Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

60 Page 60 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Mid-Body-Back (4up) <SIM 1> Communication System: GPRS -4 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.1 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/4ST/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/4ST/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

61 Page 61 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Mid-Body-Front (4up) <SIM 1> Communication System: GPRS -4 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.1 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/4ST-FRONT/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/4ST-FRONT/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

62 Page 62 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Low-Body-Back (4up) with earphone<sim 1> Communication System: GPRS -4 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.1 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/4ST-EARPHONE-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/4ST-EARPHONE-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

63 Page 63 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Mid-Body-Back (4up) with earphone<sim 1> Communication System: GPRS -4 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.1 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/4ST-EARPHONE/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/4ST-EARPHONE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.06 db Peak SAR (extrapolated) = 1.51 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

64 Page 64 of 130

65 Page 65 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 High-Body-Back (4up) with earphone<sim 1> Communication System: GPRS -4 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.1 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/4ST-EARPHONE-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/4ST-EARPHONE-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.05 db Peak SAR (extrapolated) = 1.27 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

66 Page 66 of 130 Test Laboratory: AGC Lab Date: June 7,2017 GPRS 900 Mid-Body-Back (4up) with earphone<sim 2> Communication System: GPRS -4 Slot; Communication System Band: GSM 900; Duty Cycle: 1:2.1 ; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/4ST-EARPHONE 2/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/4ST-EARPHONE 2/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.04 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

67 Page 67 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 Mid-Touch-Left <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; LEFT HEAD/L-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.05 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

68 Page 68 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 Mid-Tilt-Left <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; LEFT HEAD/L-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.13 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

69 Page 69 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 Low-Touch-Right <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; RIGHT HEAD/R-C-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.13 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

70 Page 70 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 Mid-Touch-Right <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; RIGHT HEAD/R-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg

71 Page 71 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 High-Touch-Right <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; RIGHT HEAD/R-C-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.10 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

72 Page 72 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 Mid-Tilt-Right <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; RIGHT HEAD/R-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.17 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

73 Page 73 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 High-Touch-Right <SIM 2> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; RIGHT HEAD/R-C-H 2/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-H 2/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.19 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

74 Page 74 of 130 Test Laboratory: AGC Lab Date: June 8,2017 DCS 1800 Mid-Body- Back (MS) <SIM 1> Communication System: Generic GSM; Communication System Band: DCS 1800; Duty Cycle: 1:8.3; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/BACK/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.00 db Peak SAR (extrapolated) = 1.09 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

75 Page 75 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 Low-Body- Back (2up) <SIM 1> Communication System: GPRS-2 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/2ST-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.12 W/kg BODY/2ST-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.35 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.10 W/kg

76 Page 76 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 Mid-Body- Back (2up) <SIM 1> Communication System: GPRS-2 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/2ST/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.16 W/kg BODY/2ST/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.09 db Peak SAR (extrapolated) = 1.55 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.17 W/kg

77 Page 77 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 High-Body- Back (2up) <SIM 1> Communication System: GPRS-2 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/2ST-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.78 W/kg BODY/2ST-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.04 db Peak SAR (extrapolated) = 2.10 W/kg SAR(1 g) = 1.25 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.51 W/kg

78 Page 78 of 130

79 Page 79 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 Mid-Body- Back (3up) <SIM 1> Communication System: GPRS-3 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:2.8; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/3ST/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.09 W/kg BODY/3ST/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.02 db Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg

80 Page 80 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 Mid-Body- Back (4up) <SIM 1> Communication System: GPRS-4 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:2.1; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/4ST/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.16 W/kg BODY/4ST/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.54 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.14 W/kg

81 Page 81 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 Mid-Body- Front (2up) <SIM 1> Communication System: GPRS-2 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/2ST-FRONT/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.29 W/kg BODY/2ST-FRONT/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.06 db Peak SAR (extrapolated) = 1.93 W/kg SAR(1 g) = 1.04 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.28 W/kg

82 Page 82 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 Mid-Body- Back (2up) with earphone<sim 1> Communication System: GPRS-2 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/2ST-EARPHONE/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.08 W/kg BODY/2ST-EARPHONE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.12 db Peak SAR (extrapolated) = 1.47 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.09 W/kg

83 Page 83 of 130 Test Laboratory: AGC Lab Date: June 8,2017 GPRS 1800 High-Body- Back (2up) <SIM 2> Communication System: GPRS-2 Slot; Communication System Band: DCS 1800; Duty Cycle: 1:4.2; Frequency: MHz; Medium parameters used: f = 1810 MHz; ζ= 1.43 mho/m; εr =40.86; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.2, Liquid temperature ( ): 21.6 Probe: ES3DV3 SN3337; ConvF(5.52, 5.52, 5.52); Calibrated:09/28/2016; BODY/2ST-H 2/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.37 W/kg BODY/2ST-H 2/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.88 W/kg SAR(1 g) = 1.13 W/kg; SAR(10 g) = W/kg

84 Page 84 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Low-Touch-Left (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ; Duty Cycle: 1:1; ; Frequency: MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; LEFT HEAD/L-C-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.04 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

85 Page 85 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid-Touch-Left (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ; Duty Cycle: 1:1; ; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; LEFT HEAD/L-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

86 Page 86 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I High-Touch-Left (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ; Duty Cycle: 1:1; ; Frequency: MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; LEFT HEAD/L-C-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.03 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

87 Page 87 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid-Tilt-Left (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; LEFT HEAD/L-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.11 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

88 Page 88 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid-Touch-Right (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; RIGHT HEAD/R-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.13 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

89 Page 89 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid-Tilt-Right <RMC> Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; RIGHT HEAD/R-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.08 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

90 Page 90 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid-Body-Towards Grounds (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/BACK/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.77 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.16 W/kg

91 Page 91 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid- Body- Towards Phantom (RMC) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/FRONT/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/FRONT/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.18 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

92 Page 92 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid- Body- Towards Grounds (HSDPA) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/HSDPA/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/HSDPA/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.25 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

93 Page 93 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid- Body- Towards Grounds (HSUPA) Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/HSUPA/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/HSUPA/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.02 db Peak SAR (extrapolated) = 1.37 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

94 Page 94 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Low- Body- Towards Grounds (RMC) - with earphone Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/EARPHONE-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.70 W/kg BODY/EARPHONE-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.01 db Peak SAR (extrapolated) = 2.78 W/kg SAR(1 g) = 1.4 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.77 W/kg

95 Page 95 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I Mid- Body- Towards Grounds (RMC) - with earphone Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: 1950MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/EARPHONE/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.39 W/kg BODY/EARPHONE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 2.17 W/kg SAR(1 g) = 1.14 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.45 W/kg

96 Page 96 of 130 Test Laboratory: AGC Lab Date: June 13,2017 WCDMA Band I High- Body- Towards Grounds (RMC) - with earphone Communication System: UMTS; Communication System Band: BandⅠUTRA/FDD ;Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 2000 MHz; ζ= 1.41 mho/m; εr =40.59; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):22.1, Liquid temperature ( ):21.5 Probe: ES3DV3 SN3337; ConvF(5.47, 5.47, 5.47); Calibrated:09/28/2016; BODY/EARPHONE-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.87 W/kg BODY/EARPHONE-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 2.79 W/kg SAR(1 g) = 1.56 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.96 W/kg

97 Page 97 of 130

98 Page 98 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Touch-Left (RMC ) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; LEFT HEAD/L-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.18 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

99 Page 99 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid- Tilt-Left (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; LEFT HEAD/L-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.12 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

100 Page 100 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Low- Touch-Right (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 882.4MHz;; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; RIGHT HEAD/R-C-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.08 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

101 Page 101 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid- Touch-Right (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 897.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; RIGHT HEAD/R-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm. Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.10 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

102 Page 102 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII High- Touch-Right (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 912.6MHz;; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; RIGHT HEAD/R-C-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

103 Page 103 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Tilt-Right (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ=0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; RIGHT HEAD/R-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.05 db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

104 Page 104 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Low-Body-Towards Grounds (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 882.4MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/BACK-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.00 db Peak SAR (extrapolated) = 1.62 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

105 Page 105 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Body-Towards Grounds (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/BACK/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.08 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg

106 Page 106 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII High-Body-Towards Grounds (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 912.6MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/BACK-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.46 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

107 Page 107 of 130

108 Page 108 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Body-Towards Phantom (RMC) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/FRONT/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/FRONT/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.01 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

109 Page 109 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Body-Towards Ground (HSDPA) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/HSDPA/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/HSDPA/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

110 Page 110 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Body-Towards Ground (HSUPA) Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: 897.6MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/HSUPA/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/HSUPA/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

111 Page 111 of 130 Test Laboratory: AGC Lab Date: June 7,2017 WCDMA Band VIII Mid-Body-Towards Grounds (RMC) - with earphone Communication System: UMTS; Communication System Band: BAND VIII UTRA/FDD; Duty Cycle:1:1; Frequency: MHz; Medium parameters used: f = 900 MHz; ζ= 0.98 mho/m; εr =41.02; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ): 22.3, Liquid temperature ( ): 21.5 Probe: ES3DV3 SN3337; ConvF(6.56, 6.56, 6.56); Calibrated:09/28/2016; BODY/EARPHONE/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/EARPHONE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.23 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

112 Page 112 of 130 WIFI MODE Test Laboratory: AGC Lab Date: June 12, b Mid-Touch-Left Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; LEFT HEAD/L-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.04 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

113 Page 113 of 130 Test Laboratory: AGC Lab Date: June 12, b Mid -Tilt-Left Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Left Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; LEFT HEAD/L-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg LEFT HEAD/L-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 1.12 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

114 Page 114 of 130 Test Laboratory: AGC Lab Date: June 12, b Low- Touch-Right Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2412 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; RIGHT HEAD/R-C-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.05 db Peak SAR (extrapolated) = 1.75 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.01 W/kg

115 Page 115 of 130 Test Laboratory: AGC Lab Date: June 12, b Mid- Touch-Right Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; RIGHT HEAD/R-C/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.68 W/kg RIGHT HEAD/R-C/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.11 db Peak SAR (extrapolated) = 3.57 W/kg SAR(1 g) = 1.41 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.78 W/kg

116 Page 116 of 130

117 Page 117 of 130 Test Laboratory: AGC Lab Date: June 12, b High- Touch-Right Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2472 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; RIGHT HEAD/R-C-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg RIGHT HEAD/R-C-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = 2.10 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.17 W/kg

118 Page 118 of 130 Test Laboratory: AGC Lab Date: June 12, b Mid-Tilt-Right Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Right Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; RIGHT HEAD/R-T/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.78 W/kg RIGHT HEAD/R-T/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.04 db Peak SAR (extrapolated) = 3.52 W/kg SAR(1 g) = 1.42 W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = 1.70 W/kg

119 Page 119 of 130 Test Laboratory: AGC Lab Date: June 12, b Mid-Body-Worn- Back Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; BODY/BACK/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/BACK/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.02 db Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

120 Page 120 of 130 Test Laboratory: AGC Lab Date: June 12, b Mid-Body- Worn- Front Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; BODY/FRONT/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/FRONT/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = db Peak SAR (extrapolated) = W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

121 Page 121 of 130 Test Laboratory: AGC Lab Date: June 12, b Low-Body- Worn- Back with earphone Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2412 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; BODY/EARPHONE-L/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/EARPHONE-L/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.05 db Peak SAR (extrapolated) = 1.54 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

122 Page 122 of 130 Test Laboratory: AGC Lab Date: June 12, b Mid-Body- Worn- Back with earphone Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2442 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; BODY/EARPHONE/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/EARPHONE/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.02 db Peak SAR (extrapolated) = 1.78 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

123 Page 123 of 130 Test Laboratory: AGC Lab Date: June 12, b High-Body- Worn- Back with earphone Communication System: Wi-Fi; Communication System Band: b; Duty Cycle: 1:1; Frequency: 2472 MHz; Medium parameters used: f = 2450 MHz; ζ =1.85 mho/m; εr =39.26; ρ= 1000 kg/m³; Phantom section: Flat Section Ambient temperature ( ):21.5, Liquid temperature ( ): 20.9 Probe: ES3DV3 SN3337; ConvF(4.83, 4.83, 4.83); Calibrated:09/28/2016; BODY/EARPHONE-H/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = W/kg BODY/EARPHONE-H/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = V/m; Power Drift = 0.08 db Peak SAR (extrapolated) = 1.97 W/kg SAR(1 g) = W/kg; SAR(10 g) = W/kg Maximum value of SAR (measured) = W/kg

124 Page 124 of 130 APPENDIX C. TEST SETUP PHOTOGRAPHS LEFT-CHEEK TOUCH LEFT-TILT 15

125 Page 125 of 130 RIGHT-CHEEK TOUCH RIGHT-TILT 15

126 Page 126 of 130 Body Back 5mm 5mm Body Front 5mm

127 Page 127 of 130 Body back with Headset 5mm Position of the device under test in relation to the phantom

128 Page 128 of 130 DEPTH OF THE LIQUID IN THE PHANTOM ZOOM IN Note:The position used in the measurement were according to EN/IEC /2 900MHz head 900MHz body 1800MHz head 1800MHz body

129 Page 129 of MHz head 2000MHz body 2450MHz head 2450MHz body