page1 - - Zoned system for high quality BGM and paging System Overview Key Features

Transcription

1 Zoned system for high quality BGM and paging System Overview In addition to individual sound systems in each studio, this system provides the ability to broadcast announcements throughout the entire facility. The needs of smaller studios for yoga and similar lessons are covered by a compact system consisting of an MA2030 mixing amplifier connected directly to a pair of s. Larger dance studios add a subwoofer to the system for extra musical depth and impact. Key Features Yamaha CIS deliver the same excellent sound quality whether used at low volume for BGM or higher volume for featured music. The Priority Ducker function included in both the MTX matrix processor and MA2030 mixing amplifier automatically lowers the music level when rophone input is detected. The Wireless DCP app allows source selection and volume adjustment to be carried out remotely from a compatible tablet computer or smartphone. page - -

2 R R 2 Dance Studio Training Gym Yoga Studio wireless wireless Tennis Court Entrance Lounge Sports Shop Reception Lobby R3 m analog cable cable: 8 Ω cable: 00v CAT5E cable page2 - -

3 R Wireless Mic Receiver R 2 Wireless Mic Receiver R 3 Cable Broadcast Receiver Component List VXC8 ceiling VXC4 ceiling VXS5 VXS8 VXS0S sub woofer DCP4V4S controller Qty XMV8280 amplifier MA2030 mixer amplifier MG2 mixer MTX3 matrix CD-C600RK CD player Qty 2 3 Cable List Length analog cable cable: cable: 00v CAT5E cable 25m 25m 490m 0m page3 - -

4 VXC8 ceiling Speaker type Components Coverage Angle Rating 2-way, Coaxial type, Acoustic suspension 8" Cone " Soft dome 00 conical PGM 80W Sensitivity (W,m) 90dB SPL Range (-0dB) 55Hz - 20kHz Connectors x Euroblock (4P) (Input: + / -, Transformer 70V 60W (83Ω), 30W (70Ω), 5W (330Ω),7.5W (670Ω) 00V 60W (70Ω), 30W (330Ω), 5W (670Ω) (Ø x H) Ø325 x 295mm (Ø2.8 x.6") LF HF 6.6kg (4.6lbs) VXS0S sub woofer Fitness Club: large Speaker type Subwoofer, Bass reflex Components LF 0" Dual voice coil + Satellite load per satellite output recommended Rating PGM 200W + 200W Sensitivity (W,m) 96dB SPL Range (-0dB) 45Hz - 250Hz Connectors Input: x Euroblock (4P) (CH: +/-, CH2: +/-) Satellite Output: x Euroblock (4P) (ST: +/-, ST2: +/-) 260 x 500 x 389mm (0.2 x 9.7 x 5.3") 6.5kg (36.4lbs) VXC4 ceiling Speaker type Components Coverage Angle Rating Full range, Bass reflex 4" Full range 30 conical PGM 60W Sensitivity (W,m) 87dB SPL Range (-0dB) 80Hz - 20kHz Connectors x Euroblock (4P) (Input: + / -, Transformer 70V 30W (70Ω), 5W (330Ω), 7.5W (670Ω), 3.8W (.3kΩ) 00V 30W (330Ω), 5W (670Ω), 7.5W (.3kΩ) (Ø x H) Ø225 x 95mm (Ø8.9 x 7.7") 2.6kg (5.7lbs) DCP4V4S controller Connectors Wiring Control 2x RJ45 Max cable length up to 200m, Up to 8 controllers per MTX with CAT5 cable RS485, over Ethernet US: 62 x 20 x 47mm (6.4 x 5.5 x.9") EU: 47 x 86 x 47mm (5.8 x 3.4 x.9") not including wall box US: 235g (0.52lbs) EU: 75g (0.39lbs) VXS5 Speaker type 2-way, Bass reflex Components LF 5.25" Cone HF 0.75" Soft dome Coverage Angle (H x V) 20 x 20 Rating PGM 50W Sensitivity (W,m) 89dB SPL (-0dB) 62Hz - 20kHz Range Connectors x Euroblock (4P) (Input: + / -, Transformer 70V 30W (70Ω), 5W (330Ω), 7.5W (670Ω), 3.8W (.3kΩ) 00V 30W (330Ω), 5W (670Ω), 7.5W (.3kΩ) Environmental IP35 76 x 280 x 63mm (6.9 x.0 x 6.4") 3.6kg (7.9lbs) XMV8280 Amplifier Output 4Ω / 280W x 8 khz, THD+N = % 4Ω/ Double Mode / Double Mode High impedance Voltage Gain Input Sensitivity S/N Ratio THD+N Maximum Input Level Requirements 00V line/70v line RL= RL=/Double Mode 00V 70V RL= A-weighted khz, half power RL=, 00V/70V,Po=W, 20Hz - 20kHz +24dBu 560W x 4 560W x 4 250W x 8 3.7dB 34.7dB 38.2dB 35.2dB +4dBu 00dB 0.2% 0dB, ±.0dB 00V, 20V, 230V-240V; 50Hz/60Hz 480 x 88 x 422mm (8.9" x 3.5" x 6.6") 0.kg (22.3lbs) VXS8 Speaker type 2-way, Bass reflex Components LF 8" Cone HF " Soft dome Coverage Angle (H x V) 00 x 00 Rating PGM 80W Sensitivity (W,m) 9dB SPL (-0dB) 5Hz - 20kHz Range Connectors x Euroblock (4P) (Input: + / -, Transformer 70V 60W (83Ω), 30W (70Ω), 5W (330Ω), 7.5W (670Ω) 00V 60W (70Ω), 30W (330Ω), 5W (670Ω) Environmental IP x 430 x 239mm (0.9 x 6.9 x 9.4") 8.2kg (8.lbs) MG2 mixer Input channels Mono [MIC/LINE]: 4, Mono/Stereo [MIC/LINE]: 2, Stereo [LINE]: 2 Output channels STEREO OUT: 2, PHONES:, MONITOR OUT:, AUX SEND: 2, GROUP OUT: 2 Bus STEREO:, GROUP: 2, AUX: 2 Input channel function PAD CH -CH 4 26 db HPF CH -4, 80 Hz,2 db/oct 5/6 (MIC), 7/8 (MIC) COMP CH -CH 4 knob compressor EQ CH -CH 7/8 HIGH,MID,LOW CH 9/0,CH /2 HIGH,LOW Phantom power +48V AC V, 50 Hz/60 Hz requirements 308 x 8 x 422 mm (9.6" x 2.8" x.6") 4.0kg (8.8 lbs.) Optional accessory RK-MG2 page4 - -

5 MTX3 matrix Mixing Capacity Mixing Channel : 8 Mono + 3 Stereo + 2 Effect Return + 8 Insert Output Busses :8 Mono Input CH Mono CH : 3-band PEQ, Comp, Functions Gate, Auto Gain Control, Feedback suppressor (only available in ch -4) Stereo CH:3-band PEQ, Comp, Sampling frequency Signal delay Dyna range Requirements Auto Gain Control 48kHz / 44.kHz Less than 2.5ms 20Hz to 20kHz, +0.5dB, -.5dB 07dB (Gain:-6dB) AC00V-240V; 50Hz / 60Hz 480 x 44 x 362mm (8.9" x.7" x 4.3") 4.8kg (0.6lbs) MA2030 mixer amplifier Output Input Level (Stereo Input) Output Level (Line Out) THD+N khz, THD+N = % 3Ω/4Ω High impedance 70V/00V Unbalanced Sensitivity Max before clip khz, 5W, 3Ω/4Ω khz, 30W, 70V/00V Stereo in to Line out; 20Hz to 20kHz 50Hz to 20kHz, W, 3Ω/4Ω 90Hz to 20kHz, W, 70V/00V 30W x 2 60W x -0.0 dbv -0.0 dbv +0.0 dbv -0.0 dbv 0.% 0.2% 0dB, -2.5dB, +.0dB 0dB, -3.0dB, +.0dB 0dB, -3.0dB, +.0dB Requirement 00V, 20V, 230V-240V; 50Hz/60Hz 25 x 54 x 288 mm (8.5" x 2." x.4").8kg (4.0lbs) CD-C600RK CD player (±0.5dB) Harmonic Distortion+Noise Signal-to-Noise Ratio Dyna range Output Level (khz, 0dB) 20Hz-20kHz 0.003% 05dB 96 db 2±0.3V 480 x6 x 405mm (8.9" x 4-5/8" x 6") 6.9kg (5.2lbs) page5 - -