Energy Management Modular Smart Power Quality Analyzer Type WM5-96
|
|
- Cori Harrell
- 5 years ago
- Views:
Transcription
1 Energy Management Modular Smart Power Quality Analyzer Type WM5-96 MODBUS RTU and TCP, JBUS protocol, ifix SCADA compatibility Real time clock function (without back-up) Up to optional digital inputs (sync function, remote digital input control) Up to 6 optional digital outputs (pulse, alarm, remote control) 6 freely configurable alarms with OR/AND logic linkable with up to 4 relay outputs and up to 6 open collector outputs Up to 8 optional analogue outputs (+0mA, +0VDC, +/- 5mA) Universal power supply: 8-60VAC/VDC, VAC/VDC Front protection degree: IP 65, NEMA4x, NEMA Class 0. (current/voltage) ARM powered Back-lighted graph display (8x64 dots) Bargraph indication of instantaneous power (kw sys) Front size: 96x96 mm Measurement of single phase and system instantaneous variables: W, var, VA, PF, VLL, VLN, A L, A n, Hz, THD, ASY VLL, ASY VLN (for all measurements max, min, dmd/avg and max dmd/avg values) Measured energies (imported/exported): kwh and kvarh Current and voltage inputs with autoranging capability 4x4 DGT instantaneous variable read-out 4x9 DGT total energies read-out 4x9 DGT partial energies read-out Energy measurements according to ANSI C.0, CA 0.5, EN605- CL 0.5S and ANSI C., EN605- CL 4 total -phase, 48 partial -phase and total single phase independent energy meters to be used as single, dual, multi-time tariff management Display refresh rate: 0 time / sec Harmonic distortion analysis (FFT) up to the 6 rd harmonic with graphic and numeric indication (current and voltage) Harmonics source detection Data stamping of up to 0,000 events: alarm, min, max, digital input status, digital output status as remote control, resets 4 independent communication ports: optical front communication port (ANSI C.8) optional RS 4/485 serial port, optional RS + real time clock function, optional Ethernet port Product Description -phase utility grade power quality analyzer. Particularly recommended for the measurement of the main electrical variables. Housing for panel mounting, with optical communication port (according to the ANSI standards), RS485/RS or Ethernet communication ports, pulse and alarm outputs. Parameters programming and data reading by means of Wm5Soft. How to order WM5-96 see next page How to order Wm5Soft Parameters programming and data reading by means of Wm5Soft. Modules Combination Description Part N. Slot A Slot B Slot C Slot D Slot E WM5-96 base with ANSI local port AD00 WM5-96 base without local port AD000 Power supply (8-60VAC/DC) AP0 Power supply (90-60VAC/DC) AP00 Measuring input (AV5: 400/690VL-L) AQ00 Measuring input (AV6: 0/08VL-L) AQ0 RS485 port (9 600 bps) AR04 -port RS485 port (5,00 bps) AR040 -port Ethernet/Internet port AR06 -port Analogue output (0mA DC) AO050 -out -out Analogue output (0V DC) AO05 -out -out -out -out Analogue output (+/-5mA DC) AO05 -out -out -out -out Relay output AO058 -out -out -out -out Relay output AO05 -out -out AO059 -out -out -out -out AO06 -out -out -out -out AO07 4-out 4-out 4-out 4-out Digital inputs AQ08 -in -in -in -in Digital inputs + Aux AQ04 -in -in -in -in RS port + RTC (9 600 bps) AR09 -port Specifications are subject to change without no tice WM5 96 DS ENG 008
2 How to order WM5 96 Minimum modules for a basic unit on grey background Ordering key (fully assembled instrument): Description Ch Part No. Legend Model WM5-96 with optical port ANSI C.8 type WM5-96 without optical port Range code+sys (meas. inputs) 400/690VL-L /5A (0A) 0/08VL-L /5A (0A) AD00 AD000 AQ00 AQ0 WM5 96 WM5 96 AV5. AV6. WM5 96 AV5 H XX XX XX XX XX Power supply 8-60VAC/DC power supply 90-60VAC/DC power supply AP0 AP00 L H None Ethernet/Internet port Digital inputs Digital inputs + aux Relay output Analogue output 0mADC Analogue output 0VDC Analogue output +/-5mA None Digital inputs Digital inputs + aux Relay output Analogue output 0mADC Analogue output 0VDC Analogue output +/-5mA RS bps RS bps 4 4 AR06 AQ08 AQ04 AO07 AO06 AO059 AO058 AO050 AO05 AO05 AQ08 AQ04 AO07 AO06 AO059 AO058 AO050 AO05 AO05 AR04 AR040 SLOT SLOT A B XX E D D O4 O O R B W B XX D D O4 O O R B W B S S Example of which modules to order for: WM5-96 AV5 H B S R O SX Bill of material WM5 96 AV5 measuring inputs (400/690VL-L) 90-60VAC/DC power supply Analogue output 0mA ( channels) RS485 serial port 9600 bps Relay output ( channels) Open collector ( channels) RS port+rtc Ordering No. AD00 AQ00 AP00 AO050 AR04 AO05 AO06 AR09 None Digital inputs Digital inputs + aux Relay output Relay output Analogue output 0VDC Analogue output +/-5mA 4 AQ08 AQ04 AO07 AO06 AO059 AO058 AO05 AO05 AO05 SLOT C XX D D O4 O O R R W B None Digital inputs Digital inputs + aux Relay output Relay output Analogue output 0VDC Analogue output +/-5mA 4 AQ08 AQ04 AO07 AO06 AO059 AO058 AO05 AO05 AO05 SLOT D XX D D O4 O O R R W B Options(E) A B C D Utility grade with optical port RS + RTC (utility grade) Type approval Canada for further Revenue approval process (*) RS+RTC + XU option Utility grade without optical port RS + RTC (utility grade) without optical port AR09 AR09 AR09 OPTIONS SLOT E XX SX XU SU YY SY Power Supply Measuring Input (Range+system) (*) Available only for the assembled meters having the possible minimum base configuration, respectively made up of:. display module + power supply module H + AV5 special mode. display module + power supply module H + AV6 special mode. Specifications are subject to change without no tice WM5 96 DS ENG 008
3 Input specifications Number of analogue inputs Current (-phase; system code: ) (-phase; system code: ) Voltage (-phase; system code: ) 4 (-phase; system code: ) Digital inputs (on request) Up to AQ08 Purpose No. of inputs: (voltage-free) dmd measurements synchronisation. Tariff selection: energy. Contact status reading. Clock synchronisation. Contact measuring current <8mA/ 7.5 to 5VDC AQ04 Number of inputs: + excitation output Purpose dmd measurements synchronisation. Tariff selection: energy. Contact status reading. Clock synchronisation. Excitation output 6V<+Aux<4VDC Max 5mA Contact measuring current 5mA Common characteristics Close contact resistance Max k Ω Open contact resistance Min 00kΩ Insulation see Insulation between inputs and outputs table Accuracy (display, RS, RS485) In: 5A, If.s.: 0A Un: see voltage ranges below Current (A L, A L, A L) from 0.05In to Imax: (@0 C ±5 C, R.H. 75%) ±(0.%RDG+DGT) from 0.0In to 0.05In: ±(0.5%RDG+DGT) Current (A n) ±0.5% RDG (0. to 40 to 00 Hz Voltage (@0 C±5 C,R.H. 75%) range AV5: range AV6: 400/690V L-L AC V L-N: 85 V to 460 V V L-L: 0 V to 800 V ±(0.%RDG+DGT) 0/08V L-L AC V L-N: 45 V to 45 V V L-L: 78 V to 50 V ±(0.%RDG+DGT) Includes also: frequency, power supply and output load influences ±0.% RDG (40 to 440 Hz) Frequency Active power and 0.05In to Imax, PF : apparent power ±(0.5%RDG+DGT) (@ 0 C ± 5 C, R.H. 75%) 0.0In to 0.05In, PF : ±(%RDG+DGT) 0.In to Imax, PF0.5L, PF 0.8C: ±(0.6%RDG+DGT) 0.0In to 0.In,PF0.5L, PF 0.8C: ±(%RDG+DGT) Reactive power (@ 0 C ± 5 C, R.H. 75%) 0.In to Imax, senj 0.5L/C: ±(%RDG+DGT) 0.05In to 0.In, senj 0.5L/C: ±(.5%RDG+DGT) 0.05In to Imax, senj : ±(%RDG+DGT) 0.0In to 0.05In, senj : ±(.5%RDG+DGT) Energies (@ 0 C ± 5 C, R.H. 75%) Active: class 0.5 according to EN605-, ANSI C.0 Reactive: class according to EN605-, ANSI C. In: 5A, Imax: 0A 0.In: 500mA, Start-up current: 5mA Un: 400/690V L-L (AV5) Un: 0/08V L-L (AV6) Harmonic distortion % FS (FS: 00%) (@ 0 C ± 5 C, R.H. 75%) phase: ± ; Imin: 5mA RMS; Imax: 5Ap; Umin: 0V RMS; Umax: 500Vp Temperature drift 00ppm/ C (A/V), 00ppm/ C (all the other measurements) Sampling rate Hz Hz Display Graph LCD backlighted (8x64 dots). Read-out for the instantaneous variables: 4x4 digit Total energies: 4x9 digit; Partial energies: 4x9 digit Display refresh time 00ms Max. and min. indication Max (999,999,999), Min ( 999,999,999) Front LED Red Blinking light in case of virtual alarm Fixed light in case of digital output activation (alarm) Measurements Current, voltage, power, energy, power factor, frequency, harmonic distortion (see Display Pages ). TRMS measurement of a distorted wave (voltage/current). Coupling type Direct. Crest factor <, max 0A peak Input impedance 400/690V L-L (AV5).77 MW ±5% 0/08V L-L (AV6) 885 kw ±5% Current 0.0Ω Frequency 40 to 440 Hz Overload protection (max values) Continuous voltage/current AV5: 460V LN, 800V LL/0A AV6: 45V LN, 50V LL/0A For 500ms: voltage/current AV5: 800V LN, 80V LL/6A AV6: 40V LN, 46V LL/6A Specifications are subject to change without no tice WM5 96 DS ENG 008
4 Output specifications Analogue Outputs (on request) Number of outputs Up to 8 (max 4 x 0mA + 4 x 0VDC or 4 x 0mA + 4 x ±5mA or 8 x 0VDC or 8 x ±5mA) Accuracy (@ 5 C ±5 C, R.H. 60%) ±0.%FS (0mA or 0VDC) ±0.5%FS (±5mA), FS=0mA Range 0 to 0mA or 0 to 0 VDC or ±5mA Scaling factor: Programmable within the whole range of retransmission; it allows the retransmission management of all values from: 0 and 0 ma, 0 and 0VDC, or -5mA and +5mA Response time 400 ms typical (filter excluded) Ripple % (according to IEC , EN ) Total temperature drift 500 ppm/ C Load: 0 madc 50 Ω 0 VDC 0kΩ ±5 ma 400Ω Insulation see Insulation between inputs and outputs table Optical communication port According to ANSI C.8 RS4/RS485 port (on request) Connections Addresses Protocol Data (bidirectional) Dynamic (reading only) Static (writing only) Data format Baud-rate Insulation RS output (on request) Multidrop bidirectional (static and dynamic variables) or 4 wires, max. distance 000m, termination directly on the module to 47, selectable by key-pad MODBUS RTU /JBUS, All display variables (see also the table, List of the variables that can be connected to...) All configuration parameters, reset of energy, activation of digital output Stored energy (EEPROM) max kwh/kvarh -start bit, 8-data bit, no parity/even parity, odd parity, stop bit 9.6k, 9.k, 8.4k, 5.k bit/s selectable bauds see Insulation between inputs and outputs table Bidirectional (static and dynamic variables) Connections wires, max. distance 5m, Data format -start bit, 8-data bit, no parity, even parity, odd parity, stop bit Baud-rate Protocol Other data 9.6k bit/s MODBUS RTU /JBUS as for RS4/485 Ethernet/Internet port Protocols Modbus TCP IP configuration Static IP TCP port Selectable (default 50) Client connections Max 5 simultaneously Connections RJ45 0/00 Base T Digital outputs (on request) Pulse type Number of outputs Up to 6 Type Programmable from.000 to 000 pulses per Wh/varh (total and partial) Outputs connectable to the total and/or partial energy meters (Wh/varh) Pulse duration 00ms, < 0msec (ON), 00ms (OFF) according to EN605- Alarm type Number of outputs up to 6, independent Alarm modes Up alarm, down alarm, in window alarm, out window alarm. All of them can be used with start up deactivation function and/or latch. All the alarms can be connected to all variables (see the table List of the variables that can be connected to ). Set-point adjustment from 0 to 00% of the electrical scale Hysteresis from 0 to full scale On-time delay 0 to 55s Output status Selectable; normally de-energised and normally energised Min. response time 00ms, filters excluded, Set-point on-time delay: 0 s Note The 6 digital outputs can also work as combination of pulse outputs and alarm outputs. Static (digital) outputs Purpose Signal Insulation Relay (digital) outputs Purpose Output type Insulation Electrical life: Mechanical life: (on request) For pulse outputs or for alarm outputs V ON. VDC/ max. 00 ma V OFF 0 VDC max. see Insulation between inputs and outputs table (on request) For alarm outputs or for pulse outputs Relay SPDT AC -8A, 50VAC DC -5A, 4VDC AC 5-.5A, 50VAC DC -.5A, 4VDC see Insulation between inputs and outputs table 0 5 operations (@ 8A, 50 V, PF ) operations 4 Specifications are subject to change without no tice WM5 96 DS ENG 008
5 Software functions Password Numeric code of max 4 digits from 0 to 000; protection levels of the programming data st level Password 0 : no protection nd level Password from to 000: all data are protected. System selection System -phase ( wires) System, unbalanced -phase ( wires) System, balanced System, unbalanced Transformer ratio Filters Filter operating range Filtering coefficient to 55 Filter action Alarms Working mode Reset -phase ( wires+ct) -phase ( wires) -phase (4 wires) CT up to 0 ka (6000 max) VT (PT) up to 600 kv (6000 max) 0. to 00% of the input electrical scale. Display, alarms, serial outputs (fundamental variables: V, A, W and their derived ones). OR or AND or OR+AND functions (see Alarm parameter and logic page). Freely programmable on up to 6 alarms. The alarms can be connected to any variables available in the table List of the variables that can be connected to By means of the key-pad or of the configuration software, it is possible to reset the following data: - all the min, max, dmd, dmd-max values. - total and partial counters. - latch alarms. - all the events. Data stamping Type of data Number of events Up to 0,000 Data management type: FIFO Data storage type Data flash Displaying Energy meters Stored events Display language Alarm, min, max, digital input status, digital output status as remote control, resets. All events are stored with date (dd:mm:yy) and hour (hh:mm:ss) reference 4 variables per page page that can be laid out by the user Up to 6 pages Up to 8 pages depending on the selected tariff mode. Displaying of the consumed energy of the previous months. 0,000 events. Selectable: English, Italian, French, German, Spanish Wm5Soft parameter programming and variable reading software Wm5Soft Working mode Multi-language software (Italian, English, French, German, Spanish) for variable reading, instrument calibration and parameters programming. The program runs under Windows /98/98SE/000/NT/XP. Three different working modes can be selected: Data Storing Data Transfer - management of local RS (MODBUS); - management of local optical port (MODBUS); - management of a local RS485 network (MODBUS); In pre-formatted XLS files (Excel data base). Manual or automatic at programmable timings. Specifications are subject to change without no tice WM5 96 DS ENG 008 5
6 Time period management Meters Total 4 (9-digit) Partial and multitariff 48 (9-digit) Tariffs Up to Time periods Number of periods Pulse output Energy meter recording Up to 4 per day Up to 00 different days per year Connectable to total and/or partial meters (multitariff) Consumption history by recording of the monthly energy meters ( previous months). Recording of total and partial energy meters. Energy meter recording (EEPROM) Max.999,999,999kWh/kvarh. Energy Meters Total energy meters Monthly energy meters Partial energy meters GAS/WATER meters 4 (+kwh, +kvarh, -kwh, -kvarh) It is possible to divide each energy meter here above listed in additional energy meters ( for each phase L-L-L ) 48 (energy meters for each month: +kwh, +kvarh, -kwh, -kvarh ) 6 (using digital inputs: max 4 tariffs). 48 (using the internal clock: max tariffs) GAS (m ) or WATER (hotcold m ) or remote heating (kwh) meters Harmonic distortion analysis Analysis principle Harmonic measurement Current Voltage Type of harmonics Harmonic phase angle FFT Up to the 6 rd harmonic Up to the 6 rd harmonic THD (VL and VL-N) THD odd (VL and VL-N) THD even (VL and VL-N) The same for the other phases: L, L. THD (AL) THD odd (AL) THD even (AL) The same for the other phases: L, L. The instrument measures the angle between the single harmonic of V and the single harmonic of I of the same order. According to the value of the electrical angle, it is Harmonic details System possible to know if the distortion is absorbed or generated. Note: if the system has wires the angle cannot be measured. The harmonic contents is displayed as a graph showing the whole harmonic spectrum. This value is also given as a numerical information: THD % / RMS value THD even % / RMS value THD odd% / RMS value single harmonics in % / RMS value The harmonic distortion can be measured in singlephase, -wire or 4-wire systems. Tw: 0.0 sec@50hz without filter 6 Specifications are subject to change without no tice WM5 96 DS ENG 008
7 General Specifications Operating temperature -0 to +45 C (4 to F) (R.H. < 90% non-condensing) Limit range of operating temp. -0 to +55 C (-4 to F) (R.H. <90% non-condensing) Storage temperature -0 to +60 C (- to 40 F) (R.H. < 90% non-condensing) Installation category III Pollution degree Altitude up to 000m (6560 feet) above sea-level Insulation reference voltage 00 VRMS to ground (AV5 input) Dielectric strength 4kVAC RMS (for min) Noise Rejection CMRR 00 db, 48 to 6 Hz EMC Emissions Immunity EN , EN60688 residential environment, commerce and light industry EN industrial environment. ANSI/IEEE C (surge, withstand and fast transient test) Pulse voltage (./50µs) Safety standards Measurement standards Approvals Connections 5(6) A Housing Dimensions Material Protection degree Weight EN IEC60664, IEC600- EN60664, EN600- IEC60688, EN60688, EN605-, EN605-, ANSI C.0, ANSI C. CE, curus and CSA Screw-type max..5 mm wires (x.5mm ) Max. screws tighteinig torque: 0.5 Nm 96x96x40 mm ABS, self-extinguishing: UL 94 V-0 Front: IP65, NEMA4x, NEMA Approx. 600 g (packing included) Supply specifications AC/DC voltage 90 to 60V (standard) 8 to 60V (on request) Power consumption 0VA/W (90 to 60V) 0VA/W (8 to 60V) Revenue approval settings The access to the programming parameters via front key pad and/or serial communication ports is locked. The front key pad (up and down keys) allows the displaying of the variables only, while the communication ports allows the transmission of the variables only. A proper instrument settings form must be filled up by the user before equipment supplying. WM5-96 is supplied with the desired modules plugged and sealed in the proper slots. WM5-96 fulfils: the ANSI/IEEE C requirements; the CAN-C7-M84 requirements; and can be certified according to: C.0-998, class 0.5 (independent labs); AE-507 Industry Canada Approval. In this case there are base configurations:. display module + measuring input module AV5 + power supply module H.. display module + measuring input module AV6 + power supply module H. Specifications are subject to change without no tice WM5 96 DS ENG 008 7
8 WM5-96 Alarm parameters and logic - Block enable. - Controlled variable (VLN,...). - Alarm type (up, down, window int, window ext). - Activation function. - Latch - SET. - SET. - ON delay. - OFF delay - Logical function (AND, OR). - Digital output ( to 6). A, B, C... up to 6 parameter control blocks. ON alarm (SET ) Off alarm (SET ) In alarm (SET ) Out alarm (SET ) OFF alarm (SET) On alarm (SET ) In alarm (SET ) Activation of the alarm function (SET ) Up alarm SET > SET Down alarm SET < SET In windows alarm In alarm between SET and SET Out windows alarm with start up deactivation In alarm over SET and below SET Note: any alarm working mode can be linked to the Activation function which disables only the first alarm at the power on of the instrument. All the alarms can be used with the latch function. AND/OR logical alarm examples: AND OR OR+AND A: AND B: AND C: AND A: OR B: OR C: OR A: OR B: OR C: AND D: AND A: AND B: AND C: AND A: OR B: OR C: OR A: OR B: OR C: AND D: AND A: AND B: AND C: AND A: OR B: OR C: OR A: OR B: OR C: AND D: AND 8 Specifications are subject to change without no tice WM5 96 DS ENG 008
9 Function Description Input and output scaling capability. Working of the analogue outputs (y) versus input variables (x) Figure A The sign of measured quant - ity and output quantity re - mains the same. The output quan tity is proportional to the measured quantity. Figure D The sign of measured quant - ity and output quantity re - mains the same. With the measured quantity being zero, the output quantity already has the value Y = 0. Y. Live zero output A 00 A 0 0 ma 0 ma 0 50 A 00 A 4 ma 0 ma Figure B The sign of measured quant - ity and output quantity changes simultaneously. The output quantity is proportional to the measured quantity. Figure E The sign of the measured quantity changes but the one of the output quantity remains the same. The output quant ity steadily increases from value X to value X of the measured quantity. -00 kw 0 00 kw -5 ma 0 +5 ma -00 kw 0 00 kw 0 0 ma 0 ma Figure C The sign of measured quant - ity and output quantity re - mains the same. On the range X0...X, the output quant ity is zero. The range X...X is delineated on the entire output range Y0 = Y...Y and thus presented in strongly expanded form. 80 V 00 V 0 V 0 5 ma 0 ma Figure F The sign of the measured quantity remains the same, the one of the output quantity changes as the measured quantity leaves range X0...X and passes to range X...X and vice versa A 00 A -5 ma 0 +5 ma Insulation between inputs and outputs Meas. /digital inputs Meas. /digital inputs Relay output Open collector output Analogue out. 0V, 0mA Analogue out. ±5mA AR04 AR040 AR09 Power Supply 90-60VAC/DC Power Supply 8-60VAC/DC - 4kV 4kV kv kv 4kV kv 4kV 4kV 4kV Relay output 4kV 4kV (*) 4kV 4kV 4kV 4kV 4kV 4kV 4kV 4kV Open coll.out. 4kV 4kV 4kV (*) 4kV 4kV 4kV 4kV 4kV 4kV 4kV Analogue out. 0V, 0mA kv 4kV 4kV 4kV (*) 4kV 4kV 4kV 4kV 4kV 4kV Analogue out. ±5mA kv 4kV 4kV 4kV 00V (**) 4kV 4kV 4kV 4kV 4kV AR04 4kV 4kV 4kV 4kV 4kV - - 4kV 4kV 4kV AR040 kv 4kV 4kV 4kV 4kV - - 4kV 4kV 4kV AR09 4kV 4kV 4kV 4kV 4kV 4kV 4kV - 4kV 4kV 90-60VAC/DC 4kV 4kV 4kV 4kV 4kV 4kV 4kV 4kV VAC/DC 4kV 4kV 4kV 4kV 4kV 4kV 4kV 4kV - - NOTE: In case of fault of first insulation the current from the measuring inputs to the ground is lower than ma. (*) The given insulation is granted among outputs plugged in different slots. The modules equipped with two or four outputs have therefore non insulation among the outputs. (**) Insulation between the outputs of the same module is 00V for min. Specifications are subject to change without no tice WM5 96 DS ENG 008 9
10 Digital outputs important note Code Description Slot A Slot B Slot C Slot D AO058 relay output A0 B0 C0 D0 AO059 open coll. output A0 B0 C0 D0 AO05 relay outputs A0 A B0 B C0 C D0 D AO06 open coll. outputs A0 A B0 B C0 C D0 D AO07 4 open coll. outputs A A A A4 B B B B4 C C C C4 D D D D4 The grey-marked digital outputs are activated for a while during the instrument start-up, therefore they are not suggested for pulse output purpose. Accuracy kwh, accuracy (RDG) depending on the current PF= Error +.0% +0.5% PF=L0.5 or C % kvarh, accuracy (RDG) depending on the current sinj= +.5% +% Error Class 0.5 Class -0.5% -.0% PF= PF=L0.5 or C A (0.0In) 0.A (0.0In) 0.5A (0.05In) 0.5A (0.In) 5A (In) 5A (In) -0.6% 0A (Imax) 0A (Imax) Class 0.5 accuracy limits (Active energy) EN605-5(0A) Start-up current: 5mA -% -.5% sinj= sinj=0.5 0.A (0.0In) 0.5A (0.05In) 0.5A (0.05In) 0.5A (0.In) 5A (In) 5A (In) 0A (Imax) 0A (Imax) Class accuracy limits (Reactive energy) EN605-5(0A) Start-up current: 5mA Used calculation formulas Phase variables Instantaneous effective voltage System variables Equivalent three-phase voltage Three-phase power factor (TPF) Instantaneous active power Instantaneous power factor Instantaneous effective current Instantaneous apparent power Instantaneous reactive power Voltage asymmetry V L L m ax V LL ASYLL V ( min LL ( VLN max VLN min ) ASYLN VLN Three-phase reactive power Neutral current An = A L+A L+A L Three-phase active power Three-phase apparent power ) Energy metering Where: i= considered phase (L, L or L) P= active power; Q= reactive power; t, t =starting and ending time points of consumption recording; n= time unit; t= time interval between two successive power measurements; n, n = starting and ending discrete time points of power recording 0 Specifications are subject to change without no tice WM5 96 DS ENG 008
11 List of the variables that can be connected to: Analogue outputs (all variables with the only exception of energies), alarm outputs (all variables with the only exception of energies), pulse outputs (only energies), communication (all variables). No Variable -phase system -ph. -wire -ph. 4-wire -ph. -wire system bal. ( CT) unbal. sys. -ph. 4-wire unbal. sys. Notes V L x x x o x V L o x x o x V L o o x o x 4 V L-N sys o x x o x Sys = system = S 5 V L- o x x x x 6 V L- o o x x x 7 V L- o o x x x 8 V L-L sys o o x x x Sys = system = S 9 A L x x x x x 0 A L o x x x x A L o o x x x An o x x o x An=neutral current W L x x x x x 4 W L o x x x x 5 W L o o x x x 6 W sys o x x x x 7 var L x x x x x 8 var L o x x x x 9 var L o o x x x 0 var sys o x x x x Sys = system = S VA L x x x x x VA L o x x x x VA L o o x x x 4 VA sys o x x x x Sys = system = S 5 PF L x x x x x 6 PF L o x x x x 7 PF L o o x x x 8 PF sys o x x x x Sys = system = S 9 Hz x x x x x 0 ASY VL-N o x x o x Asymmetry of phase-neutral ASY VL-L o o x x x Asymmetry of phase-phase THD V x x x o x THD V o x x o x 4 THD V o o x o x 5 THD V- o x x x x 6 THD V- o o x x x 7 THD V- o o x x x 8 THD A x x x x x 9 THD A o x x x x 40 THD A o o x x x 4 THDo V x x x o x 4 THDo V o x x o x 4 THDo V o o x o x 44 THDo V- o x x x x 45 THDo V- o o x x x 46 THDo V- o o x x x 47 THDo A x x x x x 48 THDo A o x x x x 49 THDo A o o x x x 50 THDe V x x x o x 5 THDe V o x x o x 5 THDe V o o x o x 5 THDe V- o x x x x 54 THDe V- o o x x x 55 THDe V- o o x x x 56 THDe A x x x x x 57 THDe A o x x x x 58 THDe A o o x x x 59 Phase seq. o o x x x Phase sequence (x) = available (o) = not available Specifications are subject to change without no tice WM5 96 DS ENG 008
12 Display pages Display variables in three-phase systems, 4-wire connections No st variable nd variable rd variable 4th variable Note 0 Selectable Selectable Selectable See note kwh + kvarh meters + W% bargraph V L V L V L V L-N sys instant.-min-max-dmd-max dmd V L- V L- V L- V L-L sys instant.-min-max-dmd-max dmd A L A L A L An instant.-min-max-dmd-max dmd 4 W L W L W L W sys instant.-min-max-dmd-max dmd 5 var L var L var L var sys instant.-min-max-dmd-max dmd 6 VA L VA L VA L VA sys instant.-min-max-dmd-max dmd 7 PF L PF L PF L PF sys instant.-min-max-dmd-max dmd 8 V L A L PF L W L instant.-min-max-dmd-max dmd 9 V L A L PF L W L instant.-min-max-dmd-max dmd 0 V L A L PF L W L instant.-min-max-dmd-max dmd V L-L sys ASY V L-L Hz An instant.-min-max-dmd-max dmd V L-N sys ASY V L-N Hz An instant.-min-max-dmd-max dmd W sys var sys PF sys VA sys instant.-min-max-dmd-max dmd 4 THD VL tot THD VL tot THD VL tot instant.-min-max-dmd-max dmd 5 THD VL odd THD VL odd THD VL odd instant.-min-max-dmd-max dmd 6 THD VL even THD VL even THD VL even instant.-min-max-dmd-max dmd 7 THD VL- tot THD VL- tot THD VL- tot instant.-min-max-dmd-max dmd 8 THD VL- odd THD VL- odd THD VL- odd instant.-min-max-dmd-max dmd 9 THD VL- even THD VL- even THD VL- even instant.-min-max-dmd-max dmd 0 THD AL tot THD AL tot THD AL tot instant.-min-max-dmd-max dmd THD AL odd THD AL odd THD AL odd instant.-min-max-dmd-max dmd THD AL even THD AL even THD AL even instant.-min-max-dmd-max dmd Histogram FFT V (THD, THDo, THDe, Single harmonic) 4 Histogram FFT V (THD, THDo, THDe, Single harmonic) 5 Histogram FFT V (THD, THDo, THDe, Single harmonic) 6 Histogram FFT V- (THD, THDo, THDe, Single harmonic) 7 Histogram FFT V- (THD, THDo, THDe, Single harmonic) 8 Histogram FFT V- (THD, THDo, THDe, Single harmonic) 9 Histogram FFT A (THD, THDo, THDe, Single harmonic) 0 Histogram FFT A (THD, THDo, THDe, Single harmonic) Histogram FFT A (THD, THDo, THDe, Single harmonic) Digital input status Digital output status 4 Energy meters 5 Events 6 Alarms status 7 Info 8 Info 9 Info Specifications are subject to change without no tice WM5 96 DS ENG 008
13 Wiring diagrams -phase, -wire input connections (P) Fig. Fig. 5 I L L L L N L L 9 U L N Direct connection CT connection -phase, -wire input connections (P) Fig. Fig. 4 Fig L L N CT and VT connections Direct connection CT connection -phase, and 4-wire input connections - Balanced load (P) Fig. 6 Fig. 7 Fig L L L Direct connection (-wire system) CT connection (-wire system) CT and VT connections (4-wire system) Specifications are subject to change without no tice WM5 96 DS ENG 008
14 Wiring diagrams (cont.) -phase, -wire input connections - Unbalanced load (P) Fig. 9 Fig. 0 5 I L L L L N L L 9 U L L L Direct connection (-wire system) CT connection (-wire system) -phase, -wire input connections ARON (P) Fig. Fig. Fig. CT and VT connections (-wire system) ARON connection (-wire system) ARON and VT connections (-wire system) -phase, 4 wires input connections - Unbalanced load (p+n) Fig. 4 Fig. 5 Fig L L L N Direct connection (4-wire system) CT connection (4-wire system) CT and VT connections (4-wire system) 4 Specifications are subject to change without no tice WM5 96 DS ENG 008
15 Wiring diagrams (optional modules) DC DC AO050 analogue outputs (0-0mA) AO05 analogue outputs (+/-5mA) AO05 analogue outputs (0V) DC DC 0 AO07 4-open collector output connection: This wiring diagram is valid also for the open collector module with one or two outputs. The load resistances (RC) must be designed so that the close contact current is lower than 00mA; the VDC voltage must be lower than or equal to 0VDC. AO058 relay output AO05 relay outputs SERIAL CONVERTER SERIAL CONVERTER AR04/AR040 4-wire connection of RS485 serial port AR04/AR040 -wire connection of RS485 serial port RS4/485 NOTE: additional devices provided with RS4/485 (that is RS,,...N) are connected in parallel. The termination of the serial output is carried out only on the last instrument of the network, by means of a jumper between (RX+) and (T). Wiring diagrams: digital input modules AQ04 Connection by means of NPN transistors. AQ04 Connection by means of PNP transistors. AQ04 Connection by means of contacts. AQ08 Connection by means of contacts. Specifications are subject to change without no tice WM5 96 DS ENG 008 5
16 R WM5-96 Front panel description WM5-96 Smart Power Quality Analyzer Class 0. A/V ARM PRG S Powered measures. Key-pad Set-up, programming and display parameters are easily controlled by the push-buttons. - S to enter programming and to confirm password.! AL R 4 and - to program values - to select functions - to scroll display pages. Display Instantaneous measurements: - 4 digits (max display 9999) Energies: - 9 digits (max display ). Alphanumeric indications by means of LCD display for: - Display of configuration parameters - All measuring variables.. LED Alarm LED. 4. Optical Port For data reading and programming (or pulse output). Dimensions 5mm 4mm 6 Specifications are subject to change without no tice WM5 96 DS ENG 008
17 Modules Dual analogue output modules AO050 AO05 (0mADC) (0VDC) AO05 (+/-5mADC) (-ma)(+v) (+ma)(-v) analog (0) (-ma)(+v) (+ma)(-v) analog () cd Digital output modules AO058 Single relay output AO05 Dual relay output AO059 Single open collector output AO06 Dual open collector output Other input/output modules AO07 4 open collector outputs AQ08 digital inputs AR04 AR040 RS485 port AQ04 digital inputs + aux Power supply modules AR09 RS port + RTC AP0 8-60VAC/DC power supply AP VAC/DC power supply Specifications are subject to change without no tice WM5 96 DS ENG 008 7
Energy Management Modular Smart Power Quality Analyzer Type WM5-96
Energy Management Modular Smart Power Quality Analyzer Type MODBUS RTU, JBUS protocol, ifix SCADA compatibility Real time clock function (without back-up) Up to optional digital inputs (sync function,
More informationEnergy Management. Type WM14 DIN Advanced version. Product Description 3-phase advanced power analyzer with integrated programming
Energy Management Type WM14 DI version Protection degree (front): IP40 2 digital outputs 16 freely configurable alarms with OR/AD logic linkable with up to 2 digital outputs RS422/485 serial output (MODBUS-RTU),
More informationEnergy Management Modular Smart Power Quality Analyzer Type WM3-96
Energy Management Modular Smart Power Quality Analyzer Type WM3-96 Class 0.5 (current/voltage) 32-bit µp-based modular smart power quality analyzer Graph display (128x64 dots) Front size: 96x96 mm Measurements
More informationEnergy Management Modular Universal Utility Meter and Power Analyzer Type WM4-96
Energy Management Modular Universal Utility Meter and Power Analyzer Type WM4-96 Class 0.5 (current/voltage) Universal meter: energy, water and gas 32-bit µp-based multifunction power analyzer Back-lighted
More informationEnergy Management Modular Power Quality Transducer Type PQT-90
Energy Management Modular Power Quality Transducer Type MODBUS RTU, JBUS protocol Transmission and reception of SMS messages (variables and alarm status) Data transmission and reception by means of analogue
More informationEnergy Management Energy Meter with plug-in Output Modules Type EM4-DIN
Energy Management Energy Meter with plug-in Output Modules Type EM4-DIN Degree of protection (front): IP 40 Front dimensions: 9 DIN modules RS 422/485 Serial port by means of optional module Dual pulse
More informationPower analyzers and Energy Meters Power Analyzer Type WM14-96
Power analyzers and Energy Meters Power Analyzer Type WM14-96 Optional RS422/485 serial port Alarms (visual only) V LN, An Class 2 (active energy) Class 3 (reactive energy) Accuracy ±0.5 F.S. (current/voltage)
More informationEnergy Management Power Analyzer with plug-in Output Modules Type W M22-DIN
Energy Management Power Analyzer with plug-in Output Modules Type W M22-DIN Front dimensions: 9 DIN modules Analogue output by means of optional module (20mA or 10VDC) RS 422/485 Serial port by means of
More informationPower analyzers and Energy Meters Power Analyzer Type WM14-DIN
Power analyzers and Energy Meters Power Analyzer Type WM14-DIN Optional RS422/485 serial port Alarms (visual only) V LN, An Class 2 (active energy) Class 3 (reactive energy) Accuracy ±0.5 F.S. (current/voltage)
More informationEnergy Management Smart Modular Power Analyzer Type WM30 96
Energy Management Smart Modular Power Analyzer Type WM30 96 Front protection degree: IP65, NEMA4X, NEMA12 One RS232 or RS485 port (on request) Communication protocol: MODBUS-RTU, ifix SCADA compatibility
More informationEnergy Management Three-phase energy meter with output modules Type EM4-DIN
Energy Management Three-phase energy meter with output modules Type EM4-DIN Class 1 (active energy) Class 2 (reactive energy) Three-phase multi-function energy meter Back-lighted LCD display 3 1 / 2 DGT
More informationEnergy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
More informationMID. Energy Management Energy Analyzer Type EM Product Description. How to order EM26 96 AV5 3 H O3 S1 PF A. Type Selection EM26 96
Energy Management Energy Analyzer Type EM26 96 M-bus communication by means of VMU-B adapter Application adaptable display and programming procedure (Easyprog function) Easy connections management Certified
More informationPower analyzers and Energy Meters. Multifunction indicator. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X.
Power analyzers and Energy Meters Multifunction indicator Type WM12-DIN Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase
More informationENGLISH WM3-96. ISE, Inc Royalton Rd. - Cleveland, OH USA - Tel: (440) Fax: (440)
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com WM3-96 OPERATING INSTRUCTIONS General features 2 Technical features 3 Installation
More informationEnergy Management Modular Power Analyzers Type WM2-96
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA Energy Management Modular Power Analyzers Type WM2-96 - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com Class 1 Modular power analyzer
More informationModel Range code System Power supply Option. variables. Housing for panel mounting, (front) protection degree IP50 and optional RS485 serial output.
Power analyzers and Energy Meters Multifunction indicator Type WM12-96 Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase
More informationEnergy Management Smart Modular Power Analyzer Type WM30 96
Energy Management Smart Modular Power Analyzer Type WM30 96 One RS232 and RS485 port (on request) Communication protocol: MODBUS-RTU, ifix SCADA compatibility MODBUS TCP/IP Ethernet port (on request) BACnet-IP
More informationEnergy Management Energy Meter Type EM21 72R Retro-Fit
Energy Management Energy Meter Type EM21 72R Retro-Fit Including 3 miniature split-core current sensors 10mm (90A), 16mm (150A) and 24mm (250A) diameter holes Class A (kwh) according to EN50470-3 Class
More informationDigital Panel Meters DC/AC Current and Voltage Indicator/Controller Type LDM40
Digital Panel Meters Current and Voltage Indicator/Controller Type LDM40 Multi-input instrument 4-DGT LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable
More informationEnergy Management. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X. Type Selection. Input specifications
Energy Management Multifunction indicator Type WM12-DI Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase measurements:
More informationEnergy Management. Type WM14-DIN Basic Version. How to order WM14-DIN AV5 3 D PGX. Type Selection. Input specifications. CptBSoft
Energy Management Power Analyzer ype WM-DI Basic Version Optional dual pulse output Alarms (visual only) V L, An Optional galvanically insulated measuring inputs Product Description ype Selection Range
More informationEnergy Management Smart Modular Power Analyzer Type WM30 96
Energy Management Smart Modular Power Analyzer Type WM30 96 One RS232 and RS485 port (on request) Communication protocol: MODBUS-RTU MODBUS TCP/IP Ethernet port (on request) BACnet-IP over Ethernet port
More informationEnergy Management Energy Analyzer Type EM24 DIN
Energy Management Energy Analyzer Type EM24 DIN Protection degree (front): IP50 RS485 serial output (on request) (MODBUS-RTU), ifix SCADA compatibility Application adaptable display and programming procedure
More informationEnergy Management. Type WM14-96 Basic Version. Product Description. How to order WM14-96 AV5 3 D PGX. Type Selection. Input specifications.
Energy Management Power Analyzer Type WM-96 Basic Version Optional dual pulse output Alarms (visual only) V, An Optional galvanically insulated measuring inputs Product Description 3-phase power analyzer
More informationEnergy Management Compact Power Transducer Type CPT-DIN Advanced version
Energy Management Compact Power ransducer ype CP-DI Advanced version One digital and RS485 communication port (2 wires only) 16 freely configurable alarms with OR/AD logic linkable to up to 2 digital s
More informationMID. Energy Management Energy Analyzer Type EM11 DIN. Product Description. How to order EM11 DIN AV8 1 X O1 PF. Type Selection EM11 DIN
Energy Management Energy Analyzer Type EM11 DIN Other versions available (not certified, option X): see how to order on the next page Product Description Class 1 (kwh) according to EN62053-21 Class B (kwh)
More informationEnergy Management Energy Analyzer Type EM24 DIN
Energy Management Energy Analyzer Type EM24 DIN Protection degree (front): IP50 RS485 serial output (on request) (MODBUS-RTU), ifix SCADA compatibility Dupline communication capability (DP option) Application
More informationEnergy Management Energy Meter GM3T E GM3T-RS485 E
Energy Management Energy Meter GM3T E09 814 96 GM3T-RS485 E09 816 65 Certified according to MID Directive Product Description Three-phase energy meter with removable front LCD display unit. The same unit
More informationEnergy Management Smart Modular Power Analyzer Type WM30 96
Energy Management Smart Modular Power Analyzer Type WM30 96 One RS232 and RS485 port (on request) Communication protocol: MODBUS-RTU MODBUS TCP/IP Ethernet port (on request) BACnet-IP over Ethernet port
More informationMID. Energy Management Energy Meter Type EM33 DIN. Product Description. How to order EM33 DIN AV3 3 X XS PF. Type Selection EM33 DIN
Energy Management Energy Meter Type EM33 DIN Easy connections management Certified according to MID Directive (option PF only): see how to order below Other version available (not certified, option X):
More informationEnergy Management Energy Analyzer Type EM210
Energy Management Energy Analyzer Type EM210 Multi-use housing: for both DIN-rail and panel mounting applications Current inputs AV option: CT 5A Current inputs MV option: current sensor 333 mv (CTV series)
More informationMID. Energy Management Energy Meter Type EM23 DIN. Product Description. Type Selection. How to order EM23 DIN AV9 3 X O1 PF A EM23 DIN
Energy Management Energy Meter Type EM23 DIN Certified according to MID Directive (option PF only): see how to order below Other version available (not certified, option X): see how to order on the next
More informationEnergy Management Smart Modular Power Analyzer Type WM40 96
Energy Management Smart Modular Power Analyzer Type Front dimensions: 96x96 mm Front protection degree: IP65, NEMA4x, NEMA12 Optical front communication port (ANSI type 2) Up to one RS232 or RS485 port
More informationEnergy Management Energy Analyzer Type EM210 MID
Energy Management Energy Analyzer Type Multi-use housing: for both DIN-rail and panel mounting applications MID annex MI-003 (Measuring Instruments Directive) compliant Class B (kwh) according to EN50470-3
More informationEnergy Management Smart Modular Power Analyzer Type WM40 96
Energy Management Smart Modular Power Analyzer Type WM40 96 Front protection degree: IP65, NEMA4x, NEMA12 Optical front communication port (ANSI type 2) Up to one RS232 and RS485 port (on request) Communication
More informationEnergy Management Energy meters Type EM2-DIN
Energy Management Energy meters Type 6-dgt µp-based indicator Manual scrolling of partial and total energies: kwh, kvarh. TRMS measurement of distorted waves (voltage/current) All configuration functions
More informationEnergy Management Energy Analyzer Type EM24 DIN
Energy Management Energy Analyzer Type RS485 serial output (MODBUS-RTU), ifix SCADA compatibility M-bus communication port (option M1) Dupline communication capability (option DP) Application adaptable
More informationEnergy Management Energy Meter GM3D
Energy Management Energy Meter Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Accuracy ±0.5 RDG (current/voltage) Energy meter Instantaneous variables readout: 3 DGT Energies
More informationEnergy Management Energy Analyzer Type EM24 DIN
Energy Management Energy Analyzer Type EM24 DIN RS485 serial output (MODBUS-RTU), ifix SCADA compatibility M-bus communication port (option M1 and option M2) Dupline communication capability (option DP)
More informationEN61036 EN61268 CARLO GAVAZZI
CARLO GAVAZZI Automation Components WM22-DIN: three-phase power analyzer Harmonic analysis; Energy meters; Plug and play technique. These are only a few among many other functions performed by your WM22-DIN.
More informationEnergy Management Energy Meter Type EM111
Energy Management Energy Meter Type EM111 Easy connection or wrong current direction detection Other versions available (not certified, option X: see how to order on the next page Single phase energy meter
More informationEnergy Management Energy Meter Type EM112
Energy Management Energy Meter Type EM112 Easy connection or wrong current direction detection Other versions available (not certified, option X: see how to order on the next page Single phase energy meter
More informationEnergy Management Compact Power Transducer Type CPT-DIN Basic version
Energy Management Compact Power ransducer ype CP-DI Basic version RS serial port on request Alarms (only from serial communication port) V, An Class (active energy) Class (reactive energy) Accuracy ±0..S.
More informationEnergy Management Energy Meter Type EM340
Energy Management Energy Meter Type EM340 Digital input (for tariff management Easy connection or wrong current direction detection Certified according to MID Directive (option PF only: see how to order
More informationEnergy Management Energy Analyzer Type EM112
Energy Management Energy Analyzer Type EM112 Single phase energy analyzer Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Accuracy ±0.5% RDG (current/voltage Direct current measurement
More informationEnergy Management Energy Analyzer Type EM111
Energy Management Energy Analyzer Type EM111 Single phase energy analyzer Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Accuracy ±0.5% RDG (current/voltage Direct current measurement
More informationEnergy Management Energy Analyzer Type EM270-72D
Energy Management Energy Analyzer Type EM270-72D RS485 dual port for daisy chain connection (optional) 2 programmable pulsating outputs (optional) Easy connections management (selectable) disabled by default
More informationEnergy Management Energy Analyzer Type EM280-72D
Energy Management Energy Analyzer Type EM280-72D Equivalent to Class 1 (kwh) of EN62053-21 (EM280 base only) Equivalent to Class 2 (kvarh) of EN62053-23 (EM280 base only) Virtual meter (sum of two 3-phase
More informationEnergy Management Energy Meter Type EM110
Energy Management Energy Meter Type EM110 Single phase energy meter Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Electro-mechanical display Energy readout on display: 6+1 digit
More informationRISH PQM. Power Quality Monitor. Preliminary Datasheet subject to change without notice. Individual Harmonics measurement upto 56th Harmonics
Power Quality Monitor Individual Harmonics measurement upto 56th Harmonics True representation of Voltage & Current waveforms. Phasor Representation of All 3 phases for system analysis Real Time Clock
More informationEnergy Management Energy Meter Type EM110
Energy Management Energy Meter Type EM110 Single phase energy meter Class 1 (kwh according to EN62053-21 Class B (kwh according to EN50470-3 Electro-mechanical display Energy readout on display: 6+1 digit
More informationENGLISH. General features 2. Technical features 2. Installation 5. Preliminary operations 7. Front panel description 8.
SPT-90 OPERATING INSTRUCTIONS General features 2 Technical features 2 Installation 5 Preliminary operations 7 Front panel description 8 Operating mode 9 Accuracy information 19 Useful information 22 Appendix
More informationIndex CARLO GAVAZZI WM3-96
2 Index CARLO GAVAZZI WM3-96 32bit µ-processor based power quality analyser with modular housing for Plug and Play modules FW rev. 12 Instruction manual: INDEX TO BEGIN WITH... 5 The main programming parameters...
More informationRI-F200 Series. Single and Three Phase Multifunction Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-F200 Series Single and Three Phase Multifunction Energy Meter DIN 96 panel mounted -/1A or -/5A current transformer input Single phase or three phase network compatible Programmable voltage and current
More informationENGLISH WM2 - DIN / EM2 - DIN OPERATING INSTRUCTIONS. General features 2. WM2-DIN Technical features 3. EM2-DIN Technical features 9.
ENGISH WM2 - DIN / EM2 - DIN OPERATING INSTRUCTIONS General features 2 WM2-DIN Technical features 3 EM2-DIN Technical features 9 Installation 11 Preliminary operations 12 Front panel description 12 Operating
More informationMonitoring Electric Network Via Internet
Monitoring Electric Network Via Internet NETWORK ANALYSER let "it" analyse! MPR63 Real time monitoring via internet / intranet Measurement of all electrical parameters Including Harmonics Automatic recording
More informationCentrale de mesure Power Meter PM500 Merlin Gerin
Notice d'installation et d'utilisation Installation and user manual Centrale de mesure Power Meter PM500 Merlin Gerin 059473_D Introduction and description Package contents c one PM500 power meter with
More informationPower Meter Series PM3200 Functions and characteristics
Functions and characteristics PB108433 This PowerLogic Power meter offers basic to advanced measurement capabilities. With compact size and DIN rail mounting, the PM3200 allows mains and feeders monitoring
More informationRISH Master Digital Multifunction Instrument with onsite pluggable output options. Application : Product Features:
Application : RISH Master 3430 measures important electrical parameters in 3 phase and single phase Network & replaces the multiple analog panel meters. It measures electrical parameters like AC current,
More informationemeter1 Single-phase energy meter emeter3 Three-phase energy meter User manual NO POWER & SIGNAL CABLES TOGETHER READ CAREFULLY IN THE TEXT!
emeter1 Single-phase energy meter emeter3 Three-phase energy meter User manual NO POWER & SIGNAL CABLES TOGETHER READ CAREFULLY IN THE TEXT! I n t e g r a t e d C o n t r o l S o l u t i o n s & E n e
More informationINTELLIGENT DIGITAL MULTI POWER METER [DIC-MPM]
Feature Suit for LV/ HV voltage system Compact design with all real-time measurement Consist of basic unit and optional modules 10 years back-up of integrated energy data Large LCD, high brightness High
More informationData Sheet. RISH Master Record %THD
Data Sheet %THD Application : measures important electrical parameters & replaces the multiple analog panel meters. It measures electrical parameters like AC current, Voltage, frequency, active energy
More informationPowerLogic power-monitoring units. PM700 series power meter. Technical data sheet
PowerLogic power-monitoring units PM700 series power meter Technical data sheet 2009 Functions and characteristics The PowerLogic PM700 series power meter offers all the measurement capabilities required
More informationALPHA 50 MULTIFUNCTION METER (ALPHA SERIES)
Alpha Series www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters Shunts ALPHA
More informationPRELIMINARY DATA SHEET RI-D140. Three Phase Multifunction DIN Rail Energy Meter (MID Certified) MID
RI-D140 Three Phase Multifunction DIN Rail Energy Meter (MID Certified) Four module DIN rail mounted Energy pulse LED True RMS measurement Cost effective and accurate Modbus communication -/1A or -/5A
More informationContents. Introduction and description Package contents Device identification PM Options... 80
Contents 1 Introduction and description Package contents... 77 Device identification... 77 2 Characteristics PM500... 78 Options... 80 3 Installation Front-panel cut-out... 82 Mounting... 82 4 Connections
More informationEASTRON SDM630MCT-RJV / SDM630MCT-RJA User Manual V1.1. Three phase multifunction din rail energy meter
SDM630MCT-RJV-333mV SDM630MCT-RJA-00mA Three phase multifunction din rail energy meter Plug-in solution; labor saving; wiring mistake free Measures kwh KVarh, KW, Kvar, KVA, P, F, PF, Hz, dmd, V, A, THD,etc.
More informationMT 560/UMT TRANSDUCER & ANALYZER
MT 560/UMT 560 - TRANSDUCER & ANALYZER USE The MT 560/UMT 560 multi transducer and analyzer is used for a permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard.
More informationRI-D440. Three Phase easywire Multifunction DIN Rail Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-D440 Three Phase easywire Multifunction DIN Rail Energy Meter Four module DIN rail mounted Energy pulse LED 330mV Input from easywire CTs (or -/1A and -/5A current transformer input with TAS-SCTEWA
More informationMultifunction network analyzer Q15U Q96U2L - Q96U4... Q15E Q96E MCU - MCUH Programmable transducer MCUU
Multifunction network analyzer Q15U2... - Q96U2L - Q96U4... Q15E2... - Q96E2... - MCU - MCUH Programmable transducer MCUU OPERATING MANUAL Ipm0163.8 - Edition 06.09 Langer Messtechnik GmbH Soyerhofstrasse
More informationElectrical network management. Schneider Electric. PM3200 Technical Datasheet
Electrical network management Schneider Electric PM3200 Technical Datasheet Functions and characteristics PB108433 This PowerLogic Power meter offers basic to advanced measurement capabilities. With compact
More informationRISH EM 3490 SS Kilowatt Hour Energy Meter With Rs485 RISH EM 3490 SS. Application : Product Features: Indication: Pulse Indication:
Application : RISH Master 3490 SS is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy having auto-resetting 8 digit seven segment LED counter. The unit
More information1-Phase True RMS AC/DC Over and Under Current Types DIC01, PIC01
Monitoring Relays -Phase True RMS AC/DC Over and Under Current Types DIC0, PIC0 DIC0 PIC0 TRMS AC/DC over + under, over+over, under+under current and voltage monitoring relays DC process signal plus/minus
More informationDigital Multifunction Instrument - Rish Master 3440
Application Rish Master 3440 measures important electrical parameters in 3 phase and single phase etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC current,
More informationMICROPROCESSOR-BASED METERING EQUIPMENT SECTION 16901C PART 2
PART 1 PART 2 PRODUCTS 2.01 MANUFACTURERS A. Eaton products B.. C.. The listing of specific manufacturers above does not imply acceptance of their products that do not meet the specified ratings, features
More informationSide view View from below Rear view
Dimension diagrams All dimensions in mm Side view View from below Rear view Cut out: 138 +0,8 x 138 +0,8 mm Typical connection SPS SPS 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 DSUB-9 5 4 3 2 1 8 7 6 5 4
More informationENGLISH 3 Phase Multi-function Power Meter 1/5A MID MID
Professionally approved products. Datasheet Stock Number: 144-0527 3 Phase Multi-function Power Meter 1/5A MID 96mm² Panel Mounted Power Meter. MID UK Specifications The 144-0527 is a new generation modern
More informationRISH EM 3490 DS Dual Source Energy Meter (With All Display Parameters) RISH EM 3490 DS. Application : Product Features:
(With All Display Parameters) Application : RISH EM 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network
More informationPEM353. Universal measuring device
353 Universal measuring device 353_D00335_00_D_XXEN/06.2018 353 Universal measuring device Product description The digital universal measuring device 353 is used to record and display measured quantities
More informationTechnical Data Sheet. x1000. kwh R Y B
Technical Data Sheet x1000 Von kwh IRev 3600 imp /kwh R Y B is a compact multifunction instrument which is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy
More informationPQube 3 Specifications
PQube 3 Specifications Reference conditions for factory tests: 19~25 C, 10%~70% RH MAINS VOLTAGE MEASURING CHANNELS Measurement Channels Power Configuration/ Range of Nominal Input Voltage 3 Line to Neutral,
More informationTechnical Data Sheet AMIK 300 / 301
USA SINCE 1936 RELIABILITY BEYOND MEASURE Technical Data Sheet AMIK 300 / 301 LISTED File No. E471457 AMIK AMIK 300 is a compact multifunction instrument with touch screen LCD utility which measures important
More informationRISH Master 3430 DIGITAL MULTI-FUNCTION TRANSDUCER. Electro-Meters
measures important electrical parameters in phase and single phase etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC current, Voltage, frequency, Power, Energy
More informationApplication Alpha 20 Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters
Technical Data Sheet Alpha 20 Alpha 20 is a compact multifunction instrument which Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel
More information3-phase meter with direct connection and pulse or Modbus RS485 output
87045 LIMOGES Cedex Telephone: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 3-phase meter with direct connection and CONTENTS PAGES 1. Description, usage... 1 2. Range... 1 3. Dimensions... 1 4. Positioning...
More informationALPHA 20 MULTIFUNCTION METER (ALPHA SERIES)
Alpha Series www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters Shunts ALPHA
More informationENA33LCD. Power line analyzer. User and service manual. Obrezija 5 SI-1411 Izlake
ENA33LCD Power line analyzer User and service manual version 2.9 (FW version 6.8 and newer) ETI, d.o.o. Obrezija 5 SI-1411 Izlake www.etigroup.eu/products-services 1. Front control panel and terminal plate
More informationUNIVERSAL MEASURING INSTRUMENTS. TNM 34xx. TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument 1/49
TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument True RMS measurement User-friendly programing Four different types for optimal specification RS485 interface For 3- or 4-wire connection Compact
More informationEnergy counting and measurement
Energy counting In the current context of research of energy saving, counting of consumption become unavoidable. Hager offers new residential and tertiary solutions, to better control energy consumption.
More informationPower quality Harmonics up to 40th harmonic Unbalance, rotary field indication Distortion factor THD-U / THD-I
Harmonics Temperature input Measurement accuracy 0.5 Memory 4 MByte UMG 104 Energy measurement device for DIN rails Communication Profibus (DP / V0 optional) Modbus RTU Power quality Harmonics up to 40th
More informationMultimeter 500CVD21 RTU500 series
Remote Terminal Units - Data sheet Multimeter 500CVD21 RTU500 series CT/VT interface with 4 voltage and 24 current inputs for direct monitoring of 3/4 wire 0 300 V AC (line to earth), 0...500 V AC (phase
More informationMultifuncion Measuring Device, 4 mod. DIN, connection via CT, with RS485 port
Viale Borri 231, 21100 Varese Italy Multifuncion Measuring Device, 4 mod. Contents Pages 1. Description Use... 2 2. Range... 2 3. Overall dimensions... 2 4. Preparation Connection... 2 5. General characteristics...
More informationULTRA RAPID POWER QUALITY ANALYZER
ULTRA RAPID POWER QUALITY ANALYZER Ultra rapid (cycle by cycle) advanced electrical network analysis Complete network harmonics analysis, up to 63 rd harmonic High visibility, 5 graphic LCD screen with
More informationEnergy Meters for DIN Rail Mounting Electric energy meter WS0101, WS0102,WS1102 WS0301, WS0302,WS1302
Energy Meters for DIN Rail Mounting Electric energy meter WS0101, WS0102,WS1102 WS0301, WS0302,WS1302 Direct connection up to 65 A (WSx10x) Connection with current transformer (WSx30x) Industrial or meters
More informationDimension diagrams All dimensions in mm. Typical connection UMG 604-PRO. Power Analyser UMG 604-PRO. Front view. Side view. Versorgungsspannung
Dimension diagrams All dimensions in mm 73 mm 10 mm 35 mm 44 mm 90 mm 90 mm 107,5 mm 50 mm 76 mm 82 mm Front view Side view Typical connection An. In R32 RS485 Dig. I/O Versorgungsspannung Auxiliary Supply
More informationPLA 33. Power line analyzer. User and service manual. version 2.4
PLA 33 Power line analyzer User and service manual version 2.4 Content. Front control panel and terminal plate...3 7.2.2. System frequency setting...0 2. Device description...4 7.2.3. Password protection...0
More informationnew! nd30 - METER OF POWER NETWORk PARAMETERS EXAMPlE OF APPliCATiON MEASUREMENT AND ViSUAliZATiON OF POWER NETWORk PARAMETERS
new! cat iii Electrical Safety nd30 - METER OF POWER NETWORk PARAMETERS Measurement of power network parameters in 3- or 4-wire balanced and unbalanced systems. Color graphic display: lcd TFT 3,5, 320
More informationMeasuring centers MC7x0 series Multifunction Meter MC740
Measuring centers MC7x0 series Multifunction Meter MC740 o Measurements of instantaneous values of more than 130 quantities (U, I, P, Q, S, PF, PA, f, φ, THD, MD, energy, energy cost by tariffs, etc.)
More information