FE-26/X-21. Instruction Manual DIGITAL CAMERA

Transcription

1 DIGITAL CAMERA FE-26/X-21 Instruction Manual Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product.

2 Step 1 Checking the contents of the box Strap Two AA batteries Digital camera USB cable microsd Attachment Other accessories not shown: Instruction Manual (this manual), OLYMPUS Master 2, warranty card. Contents may vary depending on purchase location. Step 2 Preparing the Camera Preparing the Camera (p. 10) Step 3 Shooting and Playing Back Images Shooting, Playback, and Erasing (p. 14) Step 4 How to Use the Camera Three Types of Setting Operations (p. 3) Step 5 Printing Direct printing (PictBridge) (p. 33) Print Reservations (DPOF) (p. 36) Contents Names of Parts... 6 Preparing the Camera Shooting, Playback, and Erasing Using Shooting Modes Using Shooting Functions Using Playback Features Menus for Shooting Functions Menus for Playback, Editing, and Printing Functions Menus for Other Camera Settings.. 30 Printing Using OLYMPUS Master Usage Tips Appendix Index EN

3 Please read Menu Settings (p. 24 to 32) while referring to this page. Three Types of Setting Operations Using the Menu Various camera settings can be accessed through the menus, including functions used during shooting and playback and the date/time and screen display. m button E button Buttons in use Arrow pad There may be menus that are unavailable depending on other related settings or the s mode (p. 17). B button 1 Press the m button. This example describes how to use the menus to set the [POWER SAVE]. CAMERA MENU 3 Use kl to select the desired Submenu 1, and press the B button. Page tab Submenu 2 EXIT MENU SET OK SETUP 1 MENU COLOR 2 BEEP 3 NORMAL ON NORMAL SETUP POWER SAVE 1 MENU COLOR NORMAL OFF 2 BEEP ON ON 3 NORMAL Shooting mode top menu EXIT POWER SAVE MENU OFF SET OK POWER SAVE BACK MENU OFF SET OK 2 Use klmn to select the desired menu, and press the B button. Pressing and holding the E button displays an explanation (menu guide) of the selected option. SETUP 1 MEMORY FORMAT 2 BACKUP 3 PIXEL MAPPING SAVE SETTINGS EXIT MENU Submenu 1 ENGLISH NO SET OK To quickly move to the desired submenu, press m to highlight the page tab, and then use kl to move the page. Press n to return to the submenu. Some menus include submenus that appear by pressing the B button. 4 Use kl to select Submenu 2, and press the B button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. Menu Settings (p. 24 to 32) SETUP 1 MENU COLOR 2 BEEP 3 EXIT POWER SAVE MENU NORMAL ON NORMAL ON SET OK 5 Press the m button to complete the setting. 3 EN

4 Using the Direct Buttons Frequently used shooting functions can be accessed using the direct buttons. Shutter button (p. 14) K button (shooting/switching shooting modes) (p. 17, 18) q button (playback) (p. 15) Zoom buttons (p. 19) F button (exposure compensation) (p. 20) & button (macro) (p. 20) # button (fl ash) (p. 19) Y button (self-timer) (p. 21) g/e button (changing information display/ menu guide) (p. 22, 23/p. 17) /D button (backlight boost/erase) (p. 21/p. 16, 29) Using the FUNC Menu (p. 22) Frequently used shooting menu functions can be set with less steps using the FUNC menu. Buttons in use Arrow pad B button B button (p. 22) 4 EN

5 Menu Index Menus for Shooting Functions In shooting mode, settings can be adjusted. 4 CAMERA MENU EXIT MENU SET OK Shooting mode top menu 1 A IMAGE QUALITY... p B CAMERA MENU WB... p. 25 ISO... p. 25 PANORAMA... p. 26 AF MODE... p C SWITCH SHOOTING MODES P... p. 14 G... p. 17 DIS MODE... p. 18 s... p. 17 MOVIE... p Q MAGIC FILTER... p D RESET... p E SETUP MEMORY FORMAT/ FORMAT... p. 30 BACKUP... p. 30 W (Language)... p. 30 PIXEL MAPPING... p. 30 SAVE SETTINGS... p. 31 MENU COLOR... p. 31 BEEP... p. 31 s (Monitor)... p. 31 X (Date/time)... p. 31 POWER SAVE... p. 32 BATTERY TYPE... p F SILENT MODE... p. 32 Menus for Playback, Editing, and Printing Functions In playback mode, settings can be adjusted. 1 PLAYBACK MENU EXIT MENU SET OK Playback mode top menu 1 G SLIDESHOW... p H PERFECT FIX... p I EDIT Q (Resize)... p. 28 P (Crop)... p J PLAYBACK MENU 0 (Protect)... p. 28 y (Rotate)... p K ERASE... p L PRINT ORDER... p E SETUP * * Same as Menus for Shooting Functions 8 F SILENT MODE... p. 32 EN 5

6 Names of Parts Camera unit Strap eyelet...p Battery/card compartment cover...p Self-timer lamp...p Lens...p. 44, 57 5 Flash...p USB connector...p. 33, 38 7 Tripod socket 6 EN

7 n button...p g/e button (changing information display/menu guide)...p. 22, 23/p Monitor...p. 14, 40 4 m button...p. 3 5 /D button (backlight boost/erase)...p. 21/p. 16, 29 6 Shutter button...p Zoom buttons...p Card access lamp...p K button (shooting/ switching shooting modes)...p. 17, q button (playback)...p B button (OK/FUNC)...p. 3, Arrow pad...p. 3, 12 F button (exposure compensation)...p. 20 & button (macro)...p. 20 Y button (self-timer)...p. 21 # button (fl ash)...p. 19 EN 7

8 Monitor Shooting mode display 1 P ISO M NORM /30 F IN QVGA IN 00:34 Still image Movie Shooting mode...p Flash mode...p Silent mode...p Macro/super macro...p Battery check...p Flash standby/camera shake warning/fl ash charge...p. 19, 40 7 AF target mark...p Number of storable still pictures/ remaining recording time...p. 14/p Current memory...p Self-timer...p Aperture value...p Shutter speed...p Exposure compensation...p Compression/frame rate...p Image size...p ISO...p White balance...p EN

9 Playback mode display x /1000 F ISO 400 NORM 12M :30 IN Still image Movie QVGA : IN 00:14 /00: Silent mode...p Print reservations/ number of prints...p. 36/p Protect...p Battery check...p Aperture value...p Exposure compensation...p White balance...p Image size...p File number Frame number/ Elapsed time/total recording time...p. 15/p Current memory...p Compression/frame rate...p ISO...p Date and time...p Shutter speed...p. 14 EN 9

10 Preparing the Camera Attaching the camera strap 2 Pull the strap tight so that it does not come loose. Loading the batteries and the xd-picture Card (sold separately) into the camera 1 Do not insert anything other than an xd-picture Card or the microsd Attachment into the camera. 2 Battery/card compartment cover For the types of batteries that can be used, see Battery handling precautions (p. 44). When using NiMH batteries, be sure they are fully charged, and select [NiMH] for [BATTERY TYPE]. [BATTERY TYPE] (p.32) Turn off the camera before opening the battery/card compartment cover. When using the camera, be sure to close the battery/card compartment cover. When to replace the batteries Replace the batteries when the error message shown below appears. Flashes in red 1 BATTERY EMPTY Monitor top right Error message 10 EN

11 3 Index area Notch Using the microsd card/ microsdhc card (sold separately) A microsd card or microsdhc card (hereafter both will be referred to as microsd card) is also compatible with this camera using the microsd Attachment. Using the microsd Attachment (p. 47) 1 Insert the microsd card into the microsd Attachment. Insert the card straight until it clicks into place. Do not touch the contact area directly. Insert the card entirely into the attachment Insert the microsd Attachment into the camera. Notch This camera allows the user to take pictures using the internal memory even when no xd-picture Card (sold separately) is inserted. Using an xd-picture Card (p. 45) Number of storable pictures (still pictures)/ Continuous recording length (movies) in the internal memory and xd-picture Card (p. 46) To remove the microsd card To remove the xd-picture Card 1 2 Pull the microsd card straight out. Do not touch the contact area of the microsd Attachment and/or microsd card. Press the card in until it clicks and comes out slightly, then grab the card and pull it out. EN 11

12 Arrow pad and operation guide The symbols 1243, displayed on various setting and movie playback screens indicate that the arrow pad be used. EXPOSURE COMP. X Setting the date and time The date and time set here are saved to image fi le names, date prints, and other data. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. Y M D TIME Y M D X Y M D TIME CANCEL MENU 1 SET OK : IN 00:14 /00:34 / Y M D CANCEL MENU Date and time setting screen Use kl to select the year for [Y]. 2 Arrow pad X Y M D TIME Operation guides displayed at the bottom of the screen indicate that the m button, B button, zoom buttons, or D button be used. CAMERA MENU CANCEL MENU Y M D 3 Press n to save the setting for [Y]. X EXIT MENU SET OK SEL. IMAGE IN Y M D TIME Y M D Operation guide W T SET OK BACK MENU OK 3 6 GO D CANCEL MENU 4 As in Steps 2 and 3, use klmn and the B button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order). For a more accurate setting, press the B button when the time signal hits 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 31) 12 EN

13 Changing the display language The language for the menu and error messages displayed on the monitor is adjustable. 1 Press the m button, and press klmn to select [E] (SETUP). SETUP EXIT MENU SET OK 2 Press the B button. SETUP 1 MEMORY FORMAT 2 BACKUP 3 ENGLISH PIXEL MAPPING SAVE SETTINGS NO EXIT MENU SET OK 3 Use kl to select [W] and press the B button. 4 Use klmn to select your language and press the B button. 5 Press the m button. EN 13

14 AUTO 1/400 F3.5 Shooting, Playback, and Erasing Shooting with the optimum aperture value and shutter speed ( P mode) 2 Hold the camera and compose the shot. In this mode, automatic shooting settings are activated while also allowing changes to a wide range of shooting menu functions such as exposure compensation, white balance, etc. as needed. 1 Press the n button to turn on the camera. P mode indicator P Monitor Horizontal grip Vertical grip 12M NORM Number of storable still pictures (p. 46) Monitor (standby mode screen) If P mode is not displayed, press the K button several times to select it. Current shooting mode display IN 4 When holding the camera, take care not to cover the fl ash with your fi ngers, etc. 3 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark fl ashes red. Try focusing again. AF target mark P Press the n button again to turn off the camera. Press halfway 1/400 F3.1 Shutter speed Aperture value Focusing (p. 42) 14 EN

15 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. Viewing images 1 Press the q button. P Press fully 1/400 F3.1 Image review screen To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the K button or press the shutter button halfway down. To shoot movies Shooting movies (A mode) (p. 18) :30 NORM 12M IN 1 Number of frames Playback image 2 Use klmn to select an image. Displays 10 frames before the current image Displays previous image Displays next image Displays 10 frames after the current image The display size of the images can be changed. Index view and close-up view (p. 23) To play back movies Select a movie, and press the B button. MOVIE PLAY OK Movie : IN 4 EN 15

16 Operations during movie playback Fast-forward: Press and hold down n. Rewind: Press and hold down m. Pause: Press the B button. Erasing images during playback ( Single image erase) 1 Press the D button when the image to be erased is displayed. ERASE IN Elapsed time/ Total recording time During playback : IN 00:12 /00:34 First (last) frame/frame advance: During pause, press k to display the fi rst frame, and press l to display the last frame. Press and hold down n to play a movie, and press and hold down m to play a movie in reverse. Press the B button to resume playback. CANCEL MENU YES NO 2 Press k to select [YES], and press the B button. [K ERASE] (p. 29) SET OK : IN 00:14 /00:34 / During pause To stop movie playback Press the m button. 16 EN

17 Using Shooting Modes The shooting mode changes in the order of P, G, h, s, A each time the K button is pressed. By switching to other shooting mode, most settings set in other than P mode will be changed to the default settings of the respective shooting mode. Using the best mode for the shooting scene (s mode) 1 Press the K button a few times to set s. PORTRAIT *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken. To take pictures of a moving subject like a pet ([ PET]) 1 Use kl to select [ PET], and press the B button to set. 2 Hold the camera to align the AF target mark on the subject and press l. When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. To focus on a moving subject continuously (AF Tracking) (p. 26). Shooting with automatic settings ( G mode) EXIT MENU SET OK An explanation of the selected mode is displayed while the E button is pressed and held. 2 Use kl to select the best shooting mode for the scene, and press the B button. According to the scene, the camera automatically selects the ideal shooting mode from [PORTRAIT]/[LANDSCAPE]/ [NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This is a fully automatic mode that allows the user to take pictures using the best mode for the shooting scene simply by pressing the shutter button. Settings in the shooting function menu are not available in G mode. Icon indicating the scene mode that is set 1 Press the K button a few times to set G. The icon changes depending on the scene that the camera automatically selects. 12M NORM IN 4 iauto In s modes, the optimum shooting settings are pre-programmed for specifi c shooting scenes. For this reason, settings may not be changed in some modes. Submenu 1 B PORTRAIT/F LANDSCAPE/ G NIGHT SCENE *1 / M NIGHT+PORTRAIT/C SPORT/ N INDOOR/W CANDLE *1 / R SELF PORTRAIT/S SUNSET *1 / X FIREWORKS *1 /V CUISINE/ d DOCUMENTS/ PET Application The camera takes a picture using the optimum settings for the scene conditions. 12M NORM AF ON IN Press the shutter button halfway down or press the g button to check which shooting mode the camera has automatically selected. 4 EN 17

18 In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, P mode will be selected. To focus on a moving subject continuously (AF Tracking) Press m to enter the AF tracking standby condition. For details on procedure to start tracking, see To focus on a moving subject continuously (AF Tracking) (p. 26). Shooting movies (n mode) 1 Press the K button a few times to set n. A mode indicator Using the digital image stabilization mode (h mode) QVGA 15 IN 00:34 This mode enables the user to reduce blur that is caused by camera shake and subject movement. 1 Press the K button a few times to set h. h mode indicator 2 Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording. Lights up red when recording REC Press halfway 12M NORM By switching to any of other shooting modes, most function settings in h mode will change to the default settings of the newly selected mode. IN 4 Press fully 00:34 Remaining recording time (p. 46) 3 Gently press the shutter button all the way down to stop recording. 18 EN

19 Using Shooting Functions Using the zoom Pressing the zoom buttons adjusts the shooting range. Using the flash The fl ash functions can be selected to best match the shooting conditions. Pressing the wide (W) button Pressing the telephoto (T) button 1 Press the # button. P AUTO P P SET OK 12M NORM Zoom bar IN 4 12M NORM Optical zoom: 3x, digital zoom: 4x Use of h mode (p. 18) is recommended when shooting with the telephoto zoom. The zoom bar appearance identifi es the status of the digital zoom. When using optical zoom and digital zoom Optical zoom range IN 4 Digital zoom range FLASH AUTO AUTO! # $ 2 Use mn to select the setting option, and press the B button to set. Option FLASH AUTO REDEYE FILL IN FLASH OFF Description The flash fi res automatically in low-light or backlight conditions. Pre-flashes are emitted to reduce the occurrence of red eye in your photos. The flash fi res regardless of the available light. The flash does not fi re. EN 19

20 Adjusting the brightness ( Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (except for G) can be adjusted brighter or darker to obtain a desired shot. 1 Press the F button. EXPOSURE COMP. Shooting closeups ( Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Press the & button. P OFF SET OK OFF % & OFF Exposure compensation value 2 Use klmn to select the desired brightness, and press the B button. 2 Use mn to select the setting option, and press the B button to set. OFF MACRO Option SUPER MACRO *3 Description Macro mode is deactivated. This enables shooting as close as 20 cm/7.9 in. *1 (60 cm/23.6 in. *2 ) to the subject. This enables shooting as close as 5 cm/2.0 in. to the subject. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fi xed. The fl ash (p. 19) and zoom (p. 19) cannot be set during super macro shooting. 20 EN

21 Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay. 1 Press the Y button. P SET OK SELFTIMER Y OFF ON Increasing the brightness of the monitor ( Backlight boost) Press in shooting mode. The monitor becomes brighter. If there is no operation for 10 seconds, the previous brightness resumes. 12M OFF NORM 2 Use kl to select the desired setting option, and press the B button to set. Option OFF ON Description The self-timer is deactivated. The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts Press the Y button again. EN 21

22 Changing the shooting information display The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display. 1 Press the g button. The displayed shooting information changes in the order shown below each time the button is pressed. Shooting mode display (p. 8) Normal P Using the FUNC menu The FUNC menu provides the following menu functions that can be quickly accessed and set. [WB] (p. 25) [A IMAGE QUALITY] (p. 24) [ISO] (p. 25) 1 Press the B button. P WB AUTO ISO AUTO 12M NORM WB AUTO AUTO w x y ISO M NORM +2.0 No information IN 4 Grid P ISO M NORM +2.0 IN 4 2 Use kl to select the menu function and mn to select the desired setting option, and then press the B button to set. 22 EN

23 Using Playback Features Index view and close-up view Index view enables quick selection of a desired image. Close-up view (up to 10x magnifi cation) allows checking of image details. 1 Press the zoom buttons. Changing the image information display Shooting information settings displayed on the screen can be changed. 1 Press the g button. The displayed image information changes in the order shown below each time the button is pressed. Single-image view Closeup view Normal W :30 NORM 12M IN 4 T NORM 12M :30 IN 4 No information W T Detailed Index view T 1/1000 F ISO 400 x10 NORM 12M :30 IN 4 W :30 IN :30 IN 4 W W T :30 IN 4 T :30 IN 4 To select an image in index view Use klmn to select an image, and press the B button to display the selected image in single-image view. To scroll an image in close-up view Use klmn to move the viewing area. EN 23

24 Menus for Shooting Functions In shooting mode, settings can be adjusted. E indicates the mode in which the function can be set. The default settings of the function are highlighted in. Selecting the appropriate image quality for your application [A IMAGE QUALITY] A IMAGE QUALITY E: P G h s n Still pictures Submenu 1 Submenu 2 Application IMAGE SIZE COMPRESSION 12M ( ) 5M ( ) 3M ( ) 2M ( ) 1M ( ) VGA ( ) Suitable for printing pictures larger than A3 (11 17 in.). Suitable for printing A4 ( in.) pictures. Suitable for printing pictures up to A4 ( in.). Suitable for printing A5 (5 7 in.) pictures. Suitable for printing pictures at postcard size. Suitable for viewing pictures on a TV or using pictures in s and on websites. 16:9 ( ) Suitable for playing pictures on a wide screen TV. FINE Shooting at high quality. NORMAL Shooting at normal quality. Movies Submenu 1 Submenu 2 Application IMAGE SIZE FRAME RATE VGA ( ) / QVGA ( ) N 30fps *1 / O 15fps *1 Select the image quality based on the image size and frame rate. Higher frame rates provides smoother movie images. *1 frames per second Number of storable pictures (still pictures)/continuous recording length (movies) in the internal memory and xd-picture Card (p. 46) 24 EN

25 Select the settings for the functions while referring to Using the Menu (p. 3). Adjusting to a natural color scheme [ WB] B CAMERA MENU WB Submenu 2 AUTO w x y E: P h s n Application The camera automatically adjusts the white balance according to the shooting scene. For shooting outdoors under a clear sky For shooting outdoors under a cloudy sky For shooting under tungsten lighting For shooting under daylight fluorescent lighting (household lighting, etc.) For shooting under neutral fluorescent lighting (desk lamps, etc.) For shooting under white fluorescent lighting (offices, etc.) Selecting the ISO sensitivity [ISO] B CAMERA MENU ISO E: P Abbreviation for the International Organization for Standardization. ISO standards specify the sensitivity for digital cameras and fi lm, thus codes such as ISO 100 are used to represent sensitivity. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. Submenu 2 AUTO 100/200/400/ 800/1600 Application The camera automatically adjusts the sensitivity according to the shooting scene. The value of the ISO sensitivity is fixed. EN 25

26 Creating panoramic images [ PANORAMA] B CAMERA MENU PANORAMA E: P h s Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master 2 software on the provided CD-ROM. The focus, exposure (p. 14), zoom position (p. 19), and [WB] (p. 25) are locked at the fi rst frame. The fl ash (p. 19) is fi xed to $ (FLASH OFF) mode. 1 Use klmn to select the direction that the frames are combined. 2 Press the shutter button to take the fi rst frame, and then compose the second shot. The part of the previous picture where it will be joined to the next picture does not remain in the frame. You have to remember what the part in the frame looked like and take the next picture so it overlaps. 3 Repeat Step 2 until the number of desired frames is taken, and then press the B button when fi nished. When the g mark is displayed, you cannot continue shooting any further. Panorama shooting is possible for up to 10 frames. Refer to the OLYMPUS Master 2 help guide for details on how to make panorama images. Selecting the focusing area [AF MODE] B CAMERA MENU AF MODE Submenu 2 FACE DETECT *1 iesp SPOT AF TRACKING Application E: P h s This is used for taking pictures of people (The camera automatically detects a face and a frame appears). Press the shutter button halfway down, and when the face is in focus, the green AF target mark appears. The orange target mark indicates that the area other than the face is in focus. This enables you to compose the shot without worrying about the focusing position. The camera finds the subject to focus on and automatically adjusts the focus. The camera focuses on the subject within the AF target mark. The camera tracks the subject movement automatically to focus on it continuously. *1 For some subjects, the frame may not appear or may take some time to appear. To focus on a moving subject continuously (AF Tracking) 1 Hold the camera to align the AF target mark on the subject and press l. 2 When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. 3 To cancel the tracking, press l or any other buttons. Depending on the subjects or the shooting conditions, the camera may be unable to lock the focus or fail to track the subject movement. When the camera fails to track the subject movement, the AF target mark changes to red. 26 EN

27 Select the settings for the functions while referring to Using the Menu (p. 3). Switching the shooting modes [C SWITCH SHOOTING MODES] C SWITCH SHOOTING MODES Shooting with special effects [Q MAGIC FILTER] Q MAGIC FILTER P G Submenu 1 DIS MODE E: P G h s n Application Shooting with optimum aperture value and shutter speed (p. 14). Shooting with automatic settings (p. 17). Using the digital image stabilization mode (p. 18). Using the best mode for the s shooting scene (p. 17). MOVIE Shooting movies (p. 18). E: P 1 Use klmn to select the desired effect and press the B button. After selecting the desired effect by pressing the B button, all functions except zoom cannot be changed. Restoring the shooting functions to the default settings [D RESET] D RESET E: P G h s n YES NO Submenu 1 Application Restores the following menu functions to the default settings. Flash (p. 19) Exposure compensation (p. 20) Macro (p. 20) Self-timer (p. 21) [A IMAGE QUALITY] (p. 24) [s ] (p. 17) Menu functions in [B CAMERA MENU] (p. 25 to 26) The current settings will not be changed. EN 27

28 Menus for Playback, Editing, and Printing Functions Settings can be adjusted during image playback. Playing back pictures automatically [G SLIDESHOW] G SLIDESHOW To start a slideshow After pressing the B button, the slideshow starts. To stop the slideshow, press the B button or the m button. Retouching images [H PERFECT FIX] H PERFECT FIX Edited or retouched images cannot be retouched again. Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Submenu 1 ALL LIGHTING FIX REDEYE FIX Application [LIGHTING FIX] and [REDEYE FIX] are applied together. Only sections darkened by backlighting and dim lighting are brightened. Eyes that are reddened by the flash are corrected. 1 Use kl to select a correction method, and press the B button. 2 Use mn to select an image for retouching, and press the B button. The retouched image is saved as a separate image. Changing the image size [Q] I EDIT Q Submenu 2 C E Application This saves a high-resolution image as a separate image with a smaller size for use in attachments and other applications. Cropping image [P] I EDIT P 1 Use mn to select an image, and press the B button. 2 Use the zoom buttons to select the size of the cropping frame, and use klmn to move the frame. Cropping frame W T SET OK 3 Press the B button. The edited image will be saved as a separate image. Protecting images [0] J PLAYBACK MENU 0 Protected images cannot be erased by [ERASE] (p. 16), [SEL. IMAGE], or [ALL ERASE] (p. 29), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 30). Submenu 2 OFF ON Application Images can be erased. Images are protected so that they cannot be erased except by formatting of the internal memory/card. 1 Use mn to select an image. 2 Use kl to select [ON]. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the B button. 28 EN

29 Select the settings for the functions while referring to Using the Menu (p. 3). Rotating images [y] J PLAYBACK MENU y Submenu 2 U +90 V 0 t 90 Application The image is rotated 90 clockwise. The image is not rotated. The image is rotated 90 counter-clockwise. 1 Use mn to select an image. 2 Use kl to select the rotation direction. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the B button. The new picture orientations will be saved even after the power is turned off. Erasing images [K ERASE] K ERASE 3 Repeat Step 2 to select the images to be erased, and then press the D button to erase the selected images. 4 Use kl to select [YES], and press the B button. The images with a R mark are erased. To erase all images [ALL ERASE] 1 Use kl to select [ALL ERASE], and press the B button. 2 Use kl to select [YES], and press the B button. Saving print settings to the image data [L PRINT ORDER] L PRINT ORDER Print Reservations (DPOF) (p. 36) Print reservation can be set only for still images that are recorded to the card. Submenu 1 SEL. IMAGE ALL ERASE Application Images are individually selected and erased. All images in the internal memory or card will be erased. When erasing pictures in the internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance. To individually select and erase images [SEL. IMAGE] 1 Use kl to select [SEL. IMAGE], and press the B button. 2 Use klmn to select the image to be erased, and press the B button to add a R mark to the image. SEL. IMAGE IN R mark BACK MENU OK GO D EN 29

30 Menus for Other Camera Settings Erasing data completely [ MEMORY FORMAT]/[ FORMAT] E SETUP MEMORY FORMAT/FORMAT YES NO Before formatting, check that no important data is left in the internal memory or card. Non-Olympus cards and cards that have been formatted by a computer must be formatted with this camera before use. Submenu 2 Application Completely erases the image data in the internal memory *1 or card (including protected images). Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory to the card [ BACKUP] E SETUP BACKUP YES NO Submenu 2 Application Backs up image data in the internal memory to the card. Cancels the backup. It takes some time to back up data. Check that the battery has suffi cient power before starting the backup. Changing the display language [W] E SETUP W Changing the display language (p. 13) Submenu 2 Languages *1 Application The language for the menus and error messages displayed on the monitor is selected. *1 The available languages vary depending on the country and/or region where the camera was purchased. Adjusting the CCD and the image processing function [ PIXEL MAPPING] E SETUP PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the B button when [START] (Submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. 30 EN

31 Select the settings for the functions while referring to Using the Menu (p. 3). Saving the mode when the camera is turned off [SAVE SETTINGS] E SETUP SAVE SETTINGS YES NO Submenu 2 Application The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. The shooting mode is set to P mode when the camera is turned on. When set to [NO], all shooting settings, except for P mode, [A IMAGE QUALITY], and the selected s mode, return to default settings when the camera is turned off. Selecting the menu screen color and background [ MENU COLOR] E SETUP MENU COLOR Submenu 2 NORMAL/ COLOR 1/ COLOR 2/ COLOR 3 Application Selects the menu screen color or background image according to your preference. Adjusting the brightness of the monitor [s] E SETUP s Submenu 2 BRIGHT/ NORMAL Application Selects the monitor brightness depending on the surrounding brightness. Setting the date and time [X] E SETUP X Setting the date and time (p. 12) To select the date display order 1 Press n after setting Minute, and use kl to select the date display order. Date order X Y M D TIME CANCEL MENU Y M D SET OK Setting the operation sound [ BEEP] E SETUP BEEP Submenu 2 OFF/ON Application Turns off or on the operating sound/warning sound of the camera buttons. EN 31

32 Saving battery power between shots [ POWER SAVE] E SETUP POWER SAVE Turning off the camera sounds [F SILENT MODE] F SILENT MODE OFF ON Submenu 2 Application Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. OFF ON Submenu 1 Application Button operation sound/warning sound are not muted. The electronic sounds (button operation sound, warning sound) are muted. To resume standby mode Press any button. [BEEP] (p. 31) Selecting the battery type [ BATTERY TYPE] E SETUP BATTERY TYPE Submenu 2 ALKALINE NiMH Application Select this option when using alkaline batteries. Select this option when using NiMH batteries. If [ALKALINE] is selected with NiMH batteries, the camera may fail to turn on when the batteries are low. If [NiMH] is selected with alkaline batteries, the camera may be turned off without displaying the low battery warning (p. 10). 32 EN

33 Printing Direct printing ( PictBridge *1 ) By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To fi nd out if your printer supports PictBridge, refer to the printer s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer s instruction manual. 2 Turn on the printer, and then connect the printer and camera. USB connector USB cable (supplied) n button Printing images at the printer s standard settings [ EASY PRINT] EASY PRINT START PC / CUSTOM PRINT OK 1 Display the image to be printed on the monitor. Viewing images (p. 15) Turn on the camera by pressing n button if it is powered off. After performing Step 2, use kl to select [EASY PRINT], press the B button. Use mn to select an image, and press the B button. 3 Press n to start printing. 4 To print another image, use mn to select an image, and press the B button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. EXIT PRINT OK EN 33

34 Changing the printer s settings for printing [ CUSTOM PRINT] 1 Follow Steps 1 and 2 for [EASY PRINT] (p. 33), and press the B button. USB PC EASY PRINT CUSTOM PRINT EXIT SET OK 2 Use kl to select [CUSTOM PRINT], and press the B button. 3 Use kl to select the print mode, and press the B button. Submenu 2 PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER *1 Application This prints the image selected in Step 6. This prints all images stored in the internal memory or card. This prints one image in a multiple layout format. This prints an index of all images stored in the internal memory or card. This prints images based on the print reservation data on the card. *1 [PRINT ORDER] is available only when print reservations have been made. Print Reservations (DPOF) (p. 36) 5 Use kl to select the [BORDERLESS] or [PICS/SHEET] settings, and press the B button. Submenu 4 Application The image is printed with a border around it ([OFF]). OFF/ON *1 The image is printed to fi ll the entire paper ([ON]). (The number of The number of images per sheet images per sheet ([PICS/SHEET]) is selectable only varies depending when [MULTI PRINT] is selected on the printer.) in Step 3. *1 The available settings for [BORDERLESS] vary depending on the printer. If [STANDARD] is selected in Steps 4 and 5, the image is printed at the printer s standard settings. SINGLEPRINT 6 Use mn to select an image IN 4 PRINT MORE 7 Press k to make a print reservation for the current image. Press l to make the detailed printer settings for the current image. OK To make the detailed printer settings 1 Use klmn to select the setting, and press the B button. 4 Use kl to select [SIZE] (Submenu 3), and press n. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS], and [PICS/SHEET] are set to the printer s standard. PRINTPAPER PRINT INFO <x DATE FILE NAME P EXIT MENU 1 WITHOUT WITHOUT SET OK SIZE BORDERLESS STANDARD STANDARD BACK MENU SET OK 34 EN

35 Submenu 5 Submenu 6 < 0 to 10 DATE WITH/ WITHOUT FILE NAME WITH/ WITHOUT P (Proceeds to the setting screen.) To crop an image [P] Application This selects the number of prints. Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. This selects a portion of the image for printing. 1 Use the zoom buttons to select the size of the cropping frame, use klmn to move the frame, and then press the B button. 9 Press the B button. PRINT PRINT CANCEL BACK MENU SET OK 10 Use kl to select [PRINT], and press the B button. Printing starts. When [OPTION SET] is selected in [ALL PRINT] mode, [PRINT INFO] screen is displayed. When printing is fi nished, the [PRINT MODE SELECT] screen is displayed. PRINT MODE SELECT PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER EXIT MENU SET OK Cropping frame W T SET OK 2 Use kl to select [OK], and press the B button. To cancel printing 1 When [TRANSFERRING] is displayed, press the B button, use kl to select [CANCEL], and then press the B button again. P IN OK CANCEL BACK MENU SET OK TRANSFERRING PRINT CANCEL OK CONTINUE CANCEL 8 If necessary, repeat Steps 6 and 7 to select the image to be printed, make the detailed settings, and set [SINGLEPRINT]. 11 Press the m button. SET OK 12 When the message [REMOVE USB CABLE] is displayed, disconnect the USB cable from the camera and printer. EN 35

36 Print Reservations (DPOF *1 ) In print reservations, the number of prints and date imprint option are saved in the image on the card. This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera. *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Make changes using the original device. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. Single-frame print reservations [<] 1 Press the q button, and then press the m button to display the top menu. 2 Use klmn to select [L PRINT ORDER], and press the B button. PRINT ORDER 4 Use mn to select the image for print reservation. Use kl to select the quantity. Press the B button. X BACK MENU DATE TIME SET OK 5 Use kl to select the [X] (date print) screen option, and press the B button. Submenu 2 NO DATE TIME NO Application This prints the image only. This prints the image with the shooting date. This prints the image with the shooting time. PRINT ORDER BACK 1 ( 1) MENU SET CANCEL 6 Use kl to select [SET], and press the B button. SET OK < U EXIT MENU SET OK 3 Use kl to select [<], and press the B button. x 0 NORM 12M : SET OK 36 EN

37 Reserving one print each of all images on the card [U] Resetting the print reservation data for selected images 1 Follow Steps 1 and 2 in [<] (p. 36). 2 Use kl to select [U], and press the B button. 3 Follow Steps 5 and 6 in [<]. Resetting all print reservation data 1 Press the q button, and then press the m button to display the top menu. 2 Use klmn to select [L PRINT ORDER], and press the B button. 3 Select either [<] or [U], and press the B button. PRINT ORDER SETTING PRINT ORDERED RESET KEEP 1 Follow Steps 1 and 2 of Resetting all print reservation data (p. 37). 2 Use kl to select [<], and press the B button. 3 Use kl to select [KEEP] and press the B button. 4 Use mn to select the image with the print reservation you want to cancel. Use kl to set the print quantity to 0. 5 If necessary, repeat Step 4, and then press the B button when finished. 6 Use kl to select the [X] (date print) screen option, and press the B button. The settings are applied to the remaining images with the print reservation data. 7 Use kl to select [SET], and press the B button. BACK MENU SET OK 4 Use kl to select [RESET], and press the B button. EN 37

38 Using OLYMPUS Master 2 System requirements and installation of OLYMPUS Master 2 Install the OLYMPUS Master 2 software by referring to the included installation guide. Connecting the camera to a computer 3 Press the n button. The camera turns on. USB PC EASY PRINT CUSTOM PRINT EXIT SET OK 1 Make sure the camera is turned off. The monitor is off. The lens is retracted. 2 Connect the camera to a computer. USB connector USB cable (supplied) 4 Use kl to select [PC], and press the B button. The computer automatically detects the camera as a new device on the fi rst connection. Windows After the computer detects the camera, a message indicating setup completion appears. Confirm the message and click OK. The camera is recognized as a removable disk. Macintosh If iphoto has started, exit iphoto and start OLYMPUS Master 2. While the camera is connected to the computer, shooting functions are disabled. Connecting the camera to a computer via a USB hub may cause unstable operation. When [MTP] is set for the submenu that appears by pressing n after selecting [PC] in Step 3, images cannot be transferred to a computer using OLYMPUS Master 2. Locate the position of the USB port by referring to your computer s instructions manual. 38 EN

39 Starting OLYMPUS Master 2 1 Double-click the OLYMPUS Master 2 icon. Windows appears on the desk top. Macintosh appears in the OLYMPUS Master 2 folder. Browse window appears after starting the software. When you start OLYMPUS Master 2 for the fi rst time after installation, Default Settings and Registration screen appear. Follow the instructions on the screen. Operating OLYMPUS Master 2 When OLYMPUS Master 2 is started, the Quick Start Guide appears with step-by-step instructions for common tasks. When the Quick Start Guide is not displayed, click in the tool bar to show the Guide. Transferring and saving images without using OLYMPUS Master 2 This camera is compatible with the USB Mass Storage Class. You can transfer and save the image data on your computer while the camera and the computer are connected. System requirements Windows : Windows 2000 Professional/ XP Home Edition/ XP Professional/Vista Macintosh : Mac OS X v10.3 or later On a computer running Windows Vista, if [MTP] is set for the submenu that appears by pressing n after selecting [PC] in Step 3 of Connecting the camera to a computer (p. 38), Windows Photo Gallery will become available. Even if a computer has USB ports, proper operation is not guaranteed in the following cases. computers with USB ports installed using an expansion card, etc. computers without a factory-installed OS and home-built computers For details on the operation, refer to the help guide of the software. EN 39

40 Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fi x the problem(s). Troubleshooting Battery The camera does not work even when batteries are installed. Insert new or recharged batteries in the correct direction. Loading the batteries and the xd-picture Card TM (sold separately) into the camera (p. 10) If [ALKALINE] is selected with NiMH batteries, the camera may fail to turn on when the batteries are low. Be sure the batteries are fully charged, and select [NiMH] for [BATTERY TYPE]. [BATTERY TYPE] (p. 32) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Card/Internal memory An error message is displayed. Error message (p. 41) Shutter button No picture is taken when the shutter button is pressed. Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Press the K button to set a shooting mode. Wait until #(fl ash charge) stops blinking before taking pictures. Monitor Difficult to see. Condensation *1 may have occurred. Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. Vertical lines appear on the screen. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the fi nal image. The light is caught in the picture. Shooting with fl ash in dark situations results in an image with many fl ash refl ections on dust in the air. Date and time function Date and time settings return to the default setting. If the batteries are removed and left out of the camera for about a day *2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. Setting the date and time (p. 12) Miscellaneous The camera makes a noise when taking pictures. The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. 40 EN

41 Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message q CARD ERROR q WRITE PROTECT > MEMORY FULL q CARD FULL CARD SETUP CLEAN CARD FORMAT MEMORY SETUP POWER OFF MEMORY FORMAT SET SET IN OK OK L NO PICTURE r PICTURE ERROR r THE IMAGE CANNOT BE EDITED Corrective action Card problem Insert a new card. Card problem Use a computer to cancel the read-only setting. Internal memory problem Insert a card. Erase unwanted images. *1 Card problem Replace the card. Erase unwanted images. *1 Card problem Use kl to select [CLEAN CARD], and press the B button. Take out the card, wipe the contact area (p. 45) with a soft, dry cloth, and then load the card again. Use kl to select [FORMAT], and press the B button. Next, use kl to select [YES], and press the B button. *2 Internal memory problem Use kl to select [MEMORY FORMAT], and press the B button. Next, use kl to select [YES], and press the B button. *2 Internal memory/card problem Take pictures before viewing them. Problem with selected image Use photo retouch software, etc. to view the image on a computer. If the image still cannot be viewed, the image file is corrupted. Problem with selected image Use photo retouch software, etc. to edit the image on a computer. CARD-COVER OPEN g BATTERY EMPTY NO CONNECTION NO PAPER NO INK JAMMED SETTINGS CHANGED *3 Operation problem Close the battery/card compartment cover. Battery problem Insert new batteries. If using rechargeable batteries, charge the batteries. Connection problem Connect the camera and computer or printer correctly. Printer problem Load paper into the printer. Printer problem Refill the ink in the printer. Printer problem Remove the jammed paper. Printer problem Return to the status where the printer can be used. Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the PRINT ERROR power on again. r Problem with selected image CANNOT PRINT *4 Use a computer to print. *1 Before erasing important images, download them to a computer. *2 All data will be erased. *3 This is displayed, for instance, when the printer s paper tray has been removed. Do not operate the printer while making the print settings on the camera. *4 This camera may be unable to print images taken by other cameras. EN 41

42 Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. Fast-moving object Focusing Focusing on the subject Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. Pressing the shutter button halfway (p. 14) Set [AF MODE] (p. 26) to [iesp] Taking a picture in [AF TRACKING] mode (p. 26) The camera tracks the subject movement automatically to focus on it continuously. Taking a picture of subjects where autofocus is difficult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot, and take the picture. Subjects with low contrast When extremely bright objects appear in the center of the screen Object with no vertical lines *1 *1 It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture. The subject is not in the center of the frame Camera shake Taking pictures without camera shake Taking pictures using h mode (p. 18) Select j (SPORT) in s mode (p. 17) The j (SPORT) mode uses a fast shutter speed and can reduce the blur incurred by a moving subject. Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a fl ash cannot be used. [ISO] (p. 25) Exposure (brightness) Taking pictures with the right brightness Taking pictures using [FACE DETECT] (p. 26) Appropriate exposure is obtained for a face against backlight, and the face is brightened. Taking pictures using [FILL IN] (p. 19) flash A subject against backlight is brightened. Taking pictures using exposure compensation (p. 20) Adjust the brightness while viewing the screen for taking the picture. Normally, taking pictures of white subjects (such as snow) results in images that are darker than the actual subject. Use the F button to adjust in the positive (+) direction to express whites as they appear. When taking pictures of black subjects, on the other hand, it is effective to adjust in the negative (-) direction. When objects are at different distances 42 EN

43 Color hue Taking pictures with colors at the same shade as they appear Taking pictures by selecting [WB] (p. 25) Best results in most environments can normally be obtained with the AUTO setting, but for some subjects, you should try experimenting with different settings. (This is especially true for sunshade under a clear sky, mixed natural and artifi cial light settings, and so on.) Taking pictures using [FILL IN] (p. 19) flash Use of the fl ash is also effective for shooting under fl uorescent and other artifi cial lighting. Playback/Editing tips Playback Playing images in the internal memory and card Remove the card when playing pictures in the internal memory Loading the batteries and the xd-picture Card (sold separately) into the camera (p. 10) Using the microsd card/microsdhc card (sold separately) (p. 11) Image quality Taking sharper pictures Taking pictures with the optical zoom Avoid using digital zoom (p. 19) to take pictures. Taking pictures at a low ISO sensitivity If the picture is taken with a high ISO sensitivity, noise (small colored spots and color unevenness that were not in the original image) can occur, and the image can appear grainy. The resulting image is grainier than with low ISO sensitivity as well. [ISO] (p. 25) Batteries Making batteries last longer Avoid any of the following operations when not actually taking pictures because they deplete the battery power Repeatedly pressing the shutter button halfway Repeatedly using the zoom Set [POWER SAVE] (p. 32) to [ON] EN 43

44 Appendix Camera care Exterior Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. Monitor Wipe gently with a soft cloth. Lens Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner. Do not use strong solvents such as benzene or alcohol, or chemically treated cloth. Mold may form on the lens surface if the lens is left dirty. Storage When storing the camera for extended periods, remove the battery and card, and keep in a cool, dry place that is well ventilated. Periodically insert the battery and test the camera functions. Avoid leaving the camera in places where chemical products are handled since this may result in corrosion. Battery handling precautions In addition to the batteries provided with the camera, the following types of battery can be used. Choose the power source best suited to the situation. AA alkaline batteries The number of pictures that you can take may vary considerably depending on the battery manufacturer and shooting conditions. AA NiMH batteries (rechargeable batteries) Olympus NiMH batteries are rechargeable and economical. For details, refer to the instruction manual for your charger. Caution: Use only batteries approved for use in this product. Otherwise it could result in explosion. Follow the instructions in this manual (p. 50) when disposing used batteries. The following types of batteries cannot be used: Lithium battery pack (CR-V3)/AA (R6) manganese (zinc-carbon) batteries/aa (R6) oxyride batteries/aa (R6) lithium batteries Power consumption by the camera varies depending on which functions are used. Power is consumed continuously during the conditions described below causing batteries to become exhausted quickly. The zoom is used repeatedly. The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus. A picture is displayed on the monitor for an extended period of time. The camera is connected to a computer or printer. Battery life varies depending on the type of battery, manufacturer, shooting conditions, etc. Similarly, the camera may turn off without displaying the battery level warning or may display the battery level warning more quickly. 44 EN

45 Using an xd-picture Card A card (and internal memory) also corresponds to the fi lm that records images in a fi lm camera. Otherwise, the recorded images (data) can be erased, and retouching is also available with the use of a computer. Cards can be removed from the camera and exchanged, but this is not possible with the internal memory. Use of larger capacity cards enables you to take more pictures. Checking the image saving location The memory indicator shows whether the internal memory or card is being used during shooting and playback. Current memory indicator IN : Internal memory is being used None: Card is being used P Current memory indicator Index area (Notes can be filled in here) 12M NORM Shooting mode IN 4 Contact area (Contact section of the card with the internal camera terminal) Do not touch the contact area directly. Cards compatible with this camera xd-picture Card (16MB to 2GB) (TypeH/M/M+, Standard) Using a new card Before using a non-olympus card or a card that was used for another purpose in a computer or other device, use [MEMORY FORMAT]/[FORMAT] (p. 30) to format the card. NORM 12M :30 IN 4 Playback mode Even if [MEMORY FORMAT]/[FORMAT], [ERASE], [SEL. IMAGE], or [ALL ERASE] is performed, the data in the card is not completely erased. When disposing of the card, damage the card to prevent the disclosure of personal data. Readout/recording process of the card Never open the battery/card compartment cover or unplug the USB cable while the camera is reading or writing data, which is indicated by blinking of the card access lamp. This can not only damage the image data but also render the internal memory or card unusable. Card access lamp EN 45