ProSpex 4.25 Pinhole Pinhole Accent Trimless Downlight

Transcription

1 Issue Date: February 2016 Fixture/Location Ref: Project Ref: ProSpex 4.25 Pinhole Pinhole Accent Trimless Downlight The ProSpex 4.25 Pinhole forms part of our extensive range of Trim or Trimless downlights, available in fixed and adjustable variants. The range also includes a Slot aperture downlight and Washlight version, all available for many MR16 sized light sources including Lucent s own LED50 series of modules. LED50 ONE Product Description Mud-in kit for seamless flush installation 1.73 (44mm) diameter pinhole aperture Deep regressed lamp position for minimal glare 360 rotation 35 tilt Accepts up to 2 media accessories Cutout (C): Ø3.85 (98mm) Damp location version available Easy rotation and re-lamping Textured White and Black finishes to trim as standard Other trim finishes available to special order Black edge to pinhole aperture Family of matching products also available A30413-A-LED-PC ProSpex 4.25 Pinhole Accent Trimless Downlight for LED50 Series LED Information LED Type Power Luminous Output* Luminous Efficacy* CCT CRI Beam Options Lamp Dimensions Wiring Max. Ambient Temperature Ingress Protection Weight COB lm 59lm/W Max. 2700K/3000K/4000K / x Ø2 2x wires with 2way connector 40 C IP20 90g *Figures based on a LED50 ONE module, 3000K with 24 beam option. Beam options and colours will vary output. Driver Information** Power Factor Efficiency Operating Temperature Max. Output Power Output Current Output Voltage Dimensions Weight VAC > % -25 C to 40 C 17W at 9-48V at L7 x.25 x D g **Based on a arvard Engineering CoolLED Non-Dimmable driver specified at Emergency Lighting Emergency packs available. Please enquire for more details. Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 01

2 Photometric Diagrams LED LED50 ONE, 3000K, 24 at 500mA LED LED50 ONE, 3000K, 38 at 500mA Fixture Order Code: A30413-A-LED-PC Fixture A30413-A-LED-PC 4.25 Pinhole Accent Trimless Downlight for LED50 Series Finish W BK RAL White Black Special Color Ceiling Thickness 12 1/2 58 5/8 75 3/4 C Custom Location DP WT Damp Wet Media at LED (Blank) None Louvre LL45 oneycomb Lens LLDF Solite LLFR Frosted LLLS Linear Spread LLS eavy Spread LLCC Warm Tone LLUV UV LED Module Order Code: LED51 Lamp LED51 LED50 ONE CCT CRI 2700K CRI 3000K CRI 4000K Beam Installation Information ProSpex 4.25 Pinhole Downlights can be used in IC/Airtight/CCEA ceilings, Non-IC ceilings and for remodel applications (Non-IC). Not suitable for installations where ambient temperatures exceed 40 C. Aftercare and Maintenance Isolate the fixture from the mains voltage supply and allow fixture to cool down before attempting any maintenance task. Safety gloves and eye protection should be used when inspecting the fixture or when changing the lamp/s. Lucent recommend that the fixture be inspected and cleaned/dusted every 12 months with a dry cloth to maximize the effectiveness of the luminaire and to reduce the risk of fire. Warranty Information All fixtures supplied by Lucent Lighting Inc. are covered by a one year standard warranty. In most cases this warranty can be extended up to five years on application. Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 02

3 Issue Date: April 2016 L-6.75 (LED50 Series) ProSpex 6.75 ousing For Lucent LED50 Series Modules Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. We offer housings for Insulated and Non-Insulated Ceilings as well as Airtight types. LED50 ONE GEN2 PLUS LED50 SuperSpot W L L2 ousing Description Rigidly constructed Easy installation, refer to installation instructions Fabricated from sheet steel All parts finished in black Lockable, adjustable steel bar hangers or butterfly/caterpillar bracket mounting options Includes wiring/junction box All connections accessible through fixture aperture Supplied complete with driver where required L ousing Dimensions L L1 L2 W to ousing Order Code: L eight /4 ousing Type NIC Non-Insulated Ceiling Mounting ardware 14 BB CB LED LED50/2 LED50/2PLUS LED51/2 LED51SS Protocol S P LP ESS LE 14 to 24 Butterfly Bracket Caterpillar Bracket 6.75 Plus LED50 One GEN2 ( ONLY) LED50 One SuperSpot 500mA 120V 277V Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron Series Fade to Black NIC LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog IC, ATC and UATC ousing Types Can be installed in direct contact with insulation when insulation R-Value is no greater than 60. NIC ousing Type No contact with insulation and at least 3 inches spacing from insulation in all directions. Copyright 2014 Lucent Lighting Inc.

4 Issue Date: January 2017 L-8.50 (LED50 Series) ProSpex 8.50 ousing IC/Airtight, CCEA For Lucent LED50 Series Modules Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. We offer housings for Insulated and Non-Insulated Ceilings as well as Airtight types. LED50 ONE GEN2 PLUS LED50 SuperSpot W L L2 ousing Description Rigidly constructed Easy installation, refer to installation instructions Fabricated from sheet steel All parts finished in black Lockable, adjustable steel bar hangers or butterfly/caterpillar bracket mounting options Includes wiring/junction box All connections accessible through fixture aperture Supplied complete with driver where required L ousing Dimensions L L1 L2 W to ousing Order Code: L eight /2 ousing Type IC Insulated Ceiling AT Airtight, CCEA Mounting ardware 14 BB CB LED LED50/2 LED50/2PLUS LED51/2 LED51SS Protocol S P LP ESS LE 14 to 24 Butterfly Bracket Caterpillar Bracket 8.50 Plus LED50 One GEN2 ( ONLY) LED50 One SuperSpot 500mA 120V 277V Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron Series Fade to Black LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog IC, ATC and UATC ousing Types Can be installed in direct contact with insulation when insulation R-Value is no greater than 60. NIC ousing Type No contact with insulation and at least 3 inches spacing from insulation in all directions. Copyright 2014 Lucent Lighting Inc. Tel. NewYork:

5 Issue Date: January 2017 L (LED50 Series) ProSpex ousing IC/Airtight, CCEA For Lucent LED50 Series Modules Lucent s range of ProSpex Downlights are designed to work in various ceiling type installations, trim or trimless. We offer housings for Insulated and Non-Insulated Ceilings as well as Airtight types. LED50 ONE GEN2 PLUS LED50 SuperSpot W L L2 ousing Description Rigidly constructed Easy installation, refer to installation instructions Fabricated from sheet steel All parts finished in black Lockable, adjustable steel bar hangers or butterfly/caterpillar bracket mounting options Includes wiring/junction box All connections accessible through fixture aperture Supplied complete with driver where required L ousing Dimensions L L1 L2 W to ousing Order Code: L eight /4 ousing Type IC Insulated Ceiling AT Airtight, CCEA Mounting ardware 14 BB CB LED LED50/2 LED50/2PLUS LED51/2 LED51SS Protocol S P LP ESS LE 14 to 24 Butterfly Bracket Caterpillar Bracket Plus LED50 One GEN2 ( ONLY) LED50 One SuperSpot 500mA 120V 277V Non-Dimmable TRIAC/Phase (120V ONLY) Lutron Phase 2-Wire (120V ONLY) Eco System 5 Series Lutron Series Fade to Black LAE A ED EA Lutron A Series 3-Wire Analog EldoLED DALI EldoLED Analog IC, ATC and UATC ousing Types Can be installed in direct contact with insulation when insulation R-Value is no greater than 60. NIC ousing Type No contact with insulation and at least 3 inches spacing from insulation in all directions. Copyright 2014 Lucent Lighting Inc. Tel. NewYork:

6 Installation Instructions For Insulated and Non-Insulated Ceiling type installations! MAINS POWER TO BE SWITCED OFF DURING INSTALLATION. C 1. Fixing of housing 2. Fine adjustment 3. Plasterboard installation Cutout (C): Ø3.85 (98mm) 4. Trimless mud in kit installtion 5. Mud in and allow to dry fully 6. Paint and allow to dry fully 7. Dropdown of power supply 8. Fixture wiring connection 9. Power supply re-installation 10. Align fixture with trimless kit and Install 11. Finished Installation Fixture Adjustment Instructions 1. Adjust rotation. 2. Adjust tilt. Copyright 2015 Lucent Lighting Inc. Tel. New York: Page 03