ETC D60. Desire Series GENERAL INFORMATION ORDERING INFORMATION. Selador D60

Transcription

1 GENERAL INFORMATION ETC s Desire Series D60 luminaire family uses the patended x7 color system to provide high-brightness, 60-emitter, round theatrical wash lights. Highly efficient primary lenses and careful colour choices make the D60 fixture ideal for stage, studio and anywhere strong colour and high-intensity are requirements. The Selador x7 Color System produces the widest range of spectrally-balanced saturated and tinted colour choices available. D60 s rugged die-cast enclosure, quiet, fan-cooled operation, multiple lens options and advanced user interface make it ideal for multiple applications. D60 LED Array Options D60 luminaires uses seven different LED colours to achieve true, usable broad-spectrum colour. The D60 luminaire is available with any one of the following x7 color arrays (not interchangeable) to best suit the intended application. D60 Vivid the x7 Color System array balanced for best all-round use as a color-changing wash fixture D60 Lustr+ optimised array with six colours plus highintensity white LEDs to create an ideal front light wash fixture for full range colour, with an emphasis on lighter colours and white ORDERING INFORMATION Selador D60 PART NO 7410A1601-0X 7410A1605-0X Notes: DESCRIPTION D60 Vivid wash luminaire, Black D60 Lustr+ wash luminaire, Black D60 luminaires ship with hanging yoke, Very Narrow secondary lens and 1.8m PowerCON to bare ends power cable. For coloured luminaires, use -1X for white and -5X for Silver Grey. Custom colours available on request. Other D60 Versions (Datasheets available) 7410A160x-xx 7410A120x-xx D60 Studio HD, Tungsten and Daylight versions D60XTI Exterior IP66-rated install versions 1 of 6

2 SPECIFICATIONS GENERAL 60 LED colour mixing wash fixture CE compliant and ETL listed to UL 1573 lighting units IP20-rated for indoor use Power and DMX in/thru connections for easy setup User-friendly control interface with multiple modes and fixture settings PHSICAL Rugged die-cast all-metal housing Easy access slots for secondary lenses and accessories Uses 225mm lenses and accessories Available in black (standard), white or silver grey. Custom colours available on request Hanging yoke standard. Optional yoke/floor stand available ELECTRICAL 100VAC to 240VAC 50/60 Hz universal power input Neutrik PowerCON in and thru connections Up to 5 fixtures may be linked via power in/thru connectors per 15A circuit using 1mm 2 cables as supplied Requires power from a non-dim source Power consumption at 230V - full intensity: 0.68A 161W Inrush current: 40A (first half cycle) LED* 50,000 hour LED life (50,000 hours to 70% intensity) 60 Luxeon Rebel LED 2.5W emitters *See additional LED notes on page three COLOUR Exclusive x7 Color System seven-colour LED array Beautifully illuminates skin tones and other objects for natural appearance and high colour rendering Broad spectrum colour interacts seamlessly with conventional sources Exclusive optional red-shift option emulates tungsten dimming performance OPTICAL Primary field angle of 17 and beam angle of 8 Secondary lenses available for multiple beam spread options Each fixture ships with a Very Narrow lens; additional lenses must be ordered separately Refer to accessories for lenses available CONTROL DMX512 in and thru via five-pin XLR connectors Multiple control options including RGB, strobe, and consolefree Master/Slave mode See DMX Control Table for additional information 15-bit virtual dimming engine provides smooth, high quality theatrical fades and minimises colour shift during dimming RDM functionality for address and setting changes THERMAL Ambient operating temperature of -20 to 40 C Active electronic thermal management for droop-free operation Low-noise fan cooling Fixture is designed for continuous operation up to 40 C ambient temperature and requires free flow of air around fixture housing ADDITIONAL ORDERING INFORMATION Power and control cables PART NO DESCRIPTION 7410B m PowerCon to bare-end power input cable 3x1.5mm 2 (Spare) 7410K1101 1m PowerCon to bare-end power thru cable 3x1mm K1102 1m PowerCon to PowerCon power trough cable 3x1mm K1103 2m PowerCon to PowerCon power trough cable 3x1mm K1104 5m PowerCon to PowerCon power trough cable 3x1mm K1105 1m PowerCon/DMX to PowerCon/DMX power trough cable 3x1mm K1106 2m PowerCon/DMX to PowerCon/DMX power trough cable 3x1mm K1107 5m PowerCon/DMX to PowerCon/DMX power trough cable 3x1mm 2 Fixtures Accessories PART NO DESCRIPTION 7410K1022 D60 Floor Stand oke, Combo, Black PSF1099 D60 Barn door (Use only as a flexible top hat to diminish aperture glare. Not for beam shaping) 7410A3040 D60 Colour Frame, Black PSF1100 D60 Egg Crate Louvre, Black PSF1097 D60 Top Hat with 76mmTube, Black PSF1096 D60 Top Hat with 152mm Tube, Black PSF1098 D60 Half Hat with 152mm Tube, Black 2 of 6

3 ADDITIONAL ORDERING INFORMATION Secondary Lens Options DESCRIPTION: The following lenses are cut for D60 fixtures and create round, linear or oblong field patterns as described below. These lenses are not for use in Selador Classic (Vivid, Lustr, Paletta, etc.) fixtures. Round and Oval lenses are supplied in frame. PART NO DESCRIPTION Narrow Linear Field Linear, rotation lenses (Same material as used with Selador Classic). May be combined to create desired field size. 7410K1032 Ø225mm Very narrow lens (linear field) 7410K1033 Ø225mm Narrow lens (linear field)) 7410K1034 Ø225mm Medium lens (linear field) 7410K1035 Ø225mm Wide lens (linear field) 7410K1036 Ø225mm Extra Wide lens (linear field) Round Field 7410K x222mm Very narrow lens (round field) 7410K x222mm Narrow lens (round field) 7410K x222mm Medium lens (round field) 7410K x222mm Wide lens (round field) 7410K x222mm Extra wide lens (round field) Oblong Field 7410K1029 Ø222mm Narrow lens (oblong field) 7410K1030 Ø222mm Medium lens (oblong field) 7410K1031 Ø222mm Wide lens (oblong field) Typical Lens Field Profiles NOTES ABOUT LED LUMINAIRES Colour Rendering Index (CRI) The previous colour rendition method developed at the time when fl uorescent light sources was introduced. Generally not applicaple to LED light sources. Colour Quality Scale (CQS) A new colour rendition method developed by NIST (The National Institute of Standards and Technology) in the US. Developed to better account for LED specifics CRI AND CQS RATINGS Desire fixtures were evaluated for CRI and CQS performance using measured output spectrum and optimized mix solutions for a best spectral match to black body sources at 3200K and 5600K. Fixture CRI CQS Color Duv Fidelity D60 Vivid at 3200K D60 Vivid at 5600K D60 Lustr+ at 3200K D60 Lustr+ at 5600K D60 Studio HD at 3200K D60 Studio HD at 5600K D60 Studio Daylight at K D60 Studio Tungsten at 3000k All D60 luminaire versions provide excellent colour rendering to the eye, particularly at higher colour temperature settings such as 5600K. In most cases the Duv is A Duv rating of indicates that the colour mix used is exactly on the black body line, with no green or magenta tint. Notes to Videographers: All Desire fixtures use Luxeon Rebel ES emitters specified by the strictest binning standards. However, on-camera LED response varies with different cameras and settings. Daylight LEDs can appear slightly greener than other 5600K sources on camera. Camera tests using your specific set up are recommended to determine the best configuration. Power Consumption at Full Intensity MODEL Narrow Linear Round VOLTAGE (V) CURRENT (A) Oblong WATTS D Typical LED source characteristics All LED sources experience some lessening of light output and some colour shift over time. LED output will vary with thermal conditions. Based on the LED manufacturer s B50 L70 specification, a Selador luminaire will achieve ~70% of its initial output after 50,000 hours of typical usage. In individual situations, LEDs will be used for different durations and at different levels. This can eventually lead to minor alterations in colour performance, necessitating slight adjustment to presets, cues or programs. 3 of 6

4 CONTROL OPTIONS User settings on D60 fixtures allow multiple operational modes and settings for either console operation via DMX protocol or stand-alone operation. The expanded LCD display provides easy navigation to all possible settings and options. Some of the setting options are: Multiple DMX choices ranging from a simple RGB profile which effectively controls all seven LED colours via three channels to nine-channel direct colour and intensity control Multiple dimming curve options Preset colors and effects for stand-alone (no console required) operation White point selection white light and colour behavior based on a specific colour temperature white light, i.e. 3200K, 5600K, etc. Loss of data behavior options instant off, hold last look for two minutes, etc. Output modes three output options that offer the user a choice between maximum output and maximum consistency See the User Manual for a complete explanation of all of the control settings and options for the D60. Quick Set-Ups To assist in managing the numerous control and fixture behavior choices, five combinations of operational settings are available to quickly get started. These settings are specifically created for different use situations and are easily accessible at the fixture display. Each setting can then be modified as required to take advantage of all of the possible control features. Setting Title Profile Description Typical Features* General Direct Factory Default: For general purpose use including interior architectural applications Stage HSI Plus 7 Enabled Theatrical lighting: Duplicates the colour and dimming behavior of tungsten stage lighting fixtures XT Arch HSI Exterior architectural lighting: Provides a high degree of colour consistency in high ambient temperature envionments High Impact RGB Event lighting: Enables quickest response, simple RGB control and strobe channel for maximum effect usage Studio Studio Studio Factory Default: Enables three parameter control of white light (intensity, white point, and tint) via DMX from console or from fixture display no console required Standard dimming curve Regulated output for colour consistency Incandescent dimming curve Regulated output for colour consistency 3200K white point setting Standard dimming curve Protected output 3200 white point setting Quick dimming curve Boost mode for maximum intensity 5600K white point setting Linear dimming curve Regulated output mode for color consistency *See user manual for complete list of features for each Quick Set-Up CONTROL OPTIONS DMX Input Channel Profiles DMX Profile DMX Channels Channel Assignments Direct 10 1 Red 2 Orange (white if Lustr+) 3 Amber 4 Green 5 Cyan 6 Blue 7 Indigo 8 Intensity 9 Strobe 10 Fan Control HSI 6 1 Hue (coarse) 2 Hue (fine) 3 Saturation 4 Intensity 6 Fan Control HSIC 7 1 Hue (coarse) 2 Hue (fine) 3 Saturation 4 Intensity 7 Colour Point (CCT) RGB 6 (Ch. 4 not used) Studio 6 (Ch. 4 not used) 1 Red 2 Green 3 Blue 4 n/a 1 Intensity 2 Colour Point (CCT) 3 Tint 4 n/a Notes Direct control of each individual colour with a separate master intensity channel. Colour calibration of LEDs is not active in this mode. The ten-channel profile will produce the highest quality colour cross-fades. High resolution hue (twochannels), saturation, and intensity control. HSI mode will produce arbitrary colour cross-fades around the colour space. High-resolution hue, saturation and intensity control as above, with the addition of a colour point channel to adjust the colour temperature of the fixture in both white light and colour. Colour cross-fade performance is the same as HSI. Effectively addresses all seven colours via three channels of control. RGB profile will produce medium quality colour cross-fades Controls fixture as a white light unit. If no DMX, i.e. console input, is present, fixture can be adjusted for these three parameters on the U/I at the back of the unit. Additional profile options Plus 7 Seven additional color control channels are available in RGB, HSI, and HSIC input profile settings. For example HSI with Plus 7 enabled becomes a 15-channel profile: Strobe 1 Hue (coarse) 2 Hue (fine) 3 Saturation 4 Intensity 7 n/a 8 Plus7 Control on/off 9 Red 10 Orange (white if Lustr+) 11 Amber 12 Green 13 Cyan 14 Blue 15 Indigo The desired colour and intensity is achieved by using the HSI or RGB channels Placing channel seven at a value over 51% gives the fixture a 15-channel profile. Channels 9-15 represent the native colours of the fixture and allow the operator to adjust individual colour channels to fine tune the colour output. Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly as the strobe channel value approaches 100%. 4 of 6

5 X X ETC PHOTOMETRICS D60 Vivid Mode Degree Candela Field Beam Per Watt Boost - cold ,540 3,760 1, Regulated ,451 3,050 1, Metric Conversions: For meters, multiply feet by For lux, multiply footcandles by Throw Distance (d) 3m 4.6m 6.1m 7.6m Field Diameter.9m 1.4m 1.8m 2.3m Illuminance (fc) 1, Illuminance (lux) 17,405 7,736 4,351 2,785 For field diameter at any distance, multiply distance by For beam diameter at any distance, multiply by D60 Lustr+ Mode Degree Candela Field Beam Per Watt Boost - cold ,012 4,317 1, Regulated ,097 3,850 1, Metric Conversions: For meters, multiply feet by For lux, multiply footcandles by Beam Angle Field Angle Candela Candela X Cosine Candela Plot Iso-Illuminance Diagram (Flat Surface Distribution) Degrees Cosine Candela Plot Degrees 50% 10% % illuminance foot candle or lux 6 16 Beam Angle Field Angle Iso-Illuminance Diagram (Flat Surface Distribution) Throw Distance (d) 3m 4.6m 6.1m 7.6m Field Diameter.9m 1.3m 1.8m 2.2m Illuminance (fc) 1, Illuminance (lux) 19,676 8,745 4,919 3,148 For field diameter at any distance, multiply distance by For beam diameter at any distance, multiply by X 10% 50% % illuminance foot candle or lux of 6

6 D60 ACOUSTICAL INFORMATION FIXTURE SPEED SOUND PRESSURE LEVEL* (Background noise level in test chamber) N/A 18.3 dba Selador Classic Single fan speed 28.1 dba Desire D60 30% 25.0 dba 51% 37.4 dba 60% 38.6 dba 100% 43.1 dba * Average of readings from 4 sides of fixture PHSICAL Selador D60 Weights and Dimensions WEIGHT* SHIPPING WEIGHT 8.7 kgs 9.7 kgs * Does not include mounting hardware The fan in all D60 fixtures is thermostatically controlled to run as needed. In regulated mode, fan speed in colour-mixing fixtures (Vivid, Lustr+, etc.) will typically not rise above 30% when at full intensity in normal room teperature. 60% fan speed may be noted in Studio Daylight and Studio Tungsten fixtures at high intensities at room temperature. 361mm 114mm 361mm 178mm 249mm 168mm 290mm 270mm 309mm AVAILABLE FROM Corporate Headquarters 3031 Pleasant View Rd, PO Box , Middleton WI USA Tel Fax London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0) Fax +44 (0) Rome, IT Via Pieve Torina, 48, Rome, Italy Tel +39 (06) Fax +44 (0) Holzkirchen, DE Ohmstrasse 3, Holzkirchen, Germany Tel +49 (80 24) Fax +49 (80 24) Hong Kong Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung uet Road, Kowloon Bay, Kowloon, Hong Kong Tel Fax Web Copyright 2015 ETC. All Rights Reserved. All product information and specifications subject to change. 7410L1006-GB Rev. B 06/2015 This product is protected by one or more of the following U.S. Patents: 6,016,038, 6,150,774, 6,788,011, 6,806,659, 6,683,423 and 7,023,543 6 of 6