Certificate No.: 2531 CPR CSC10015 Issue date:
|
|
- Jonas Bell
- 6 years ago
- Views:
Transcription
1 CERTIFICATE OF CONSTANCY OF PERFORMANCE Issued by DBI Certification, notified body No In compliance with Regulation 305/2011/EU of the European Parliament of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product Gallows with mounted signboards type BS Scope: Fixed vertical road trafic signs (ZA.6) The product fulfils the essential characteristic: See Annex 1 Intended use: Complete assemblies of fixed vertical road traffic signs, to be mounted at the top of a straight steel pipe Placed on the market under the name or trade mark of: INFRA Group Danmark ApS Industrivej Ringe Danmark produced in the manufacturing plant: CPA30005 This certificate attests that all provisions concerning the assessment verification of constancy of performance described in Annex ZA of the stards EN :2007 : Fixed, vertical road traffic signs-part 1: Fixed signs under system 1 for the performance set out in this certificate are applied that the performance of the construction product is assessed to remain constant. The attached annexes form part of this certificate. Date of issue: This certificate will remain valid as long as neither the harmonized stard, the construction product, the AVCP methods nor the manufacturing conditions in the plant are modified significantly unless suspended or withdrawn by the notified product certification body. This certificate was first issued Per Lyster Responsible for evaluation Merete Poulsen Responsible for certification decision Tlf.: Page 1 of 11
2 Annex 1 EXTENT Description classification: Sign sizes are maximum sizes (Ø, h w) Sizes of signboards different types of gallows Pipes: Minimum steel quality: S235 in dimension Ø48,3 x 2,9, Ø48,3 x 3,0 Ø48,3 x 3,2 mm Minimum aluminium quality: R p0,2 = 180 MPa, min. 2 mm thickness Classification according to wind load classes Placed in WL1 Placed in WL2 Placed in WL3 TDB4, TDT0, WL1, DSL0, TDB5, TDT0, TDB5, TDT0, WL3, DSL0, TDT5 SP1. - TDB4, TDT0, WL3, DSL0, PL0, TDB2, TDB4, TDT0, WL1, DSL0, TDB5, TDT0, TDT4, SP1. TDB5, TDT0, WL3, DSL0, PL0, TDB2, Tlf.: Page 2 of 11
3 - TDT3 SP1. TDB4, TDT0, WL3, DSL0, PL0, TDB2, Circular 300 x 700 mm WL1, DSL0, Circular 300 x 700 mm PL0, TDB2, Circular 300 x 700 mm WL3, DSL0, PL0, TDB2, TDT5 SP1. Circular 300 x 700 mm 600 x 700 mm WL1, DSL0, PL0, TDB3, TDT5 SP x 700 mm 600 x 700 mm TDB4, TDT0, PL0, TDB3, TDT6 SP1 - Tlf.: Page 3 of 11
4 Fixings: 0913 Performance under vehicle impact Pass. The signs, sizes gallows are intended for mounting at the top of another straight steel pipe. Together the gallows the straight steel is the support for the sign. NPD To be declared on the support ORALITE 5710 Engineering Grade: Retroreflective ORALITE 5710 Engineering Grade with the following original dyed Colour Name of product Visibility characteristics Durability Daylight Chromaticity & luminance factor For black Coefficient of retroreflection Impact resistance White ORALITE Engineering Grade CR2 RA1 pass pass Yellow ORALITE Engineering Grade CR2 RA1 pass pass Red ORALITE Engineering Grade CR2 RA1 pass pass Blue ORALITE Engineering Grade CR2 RA1 pass pass Green ORALITE Engineering Grade CR2 RA1 pass pass Orange ORALITE Engineering Grade CR1 RA1 pass pass Brown ORALITE Engineering Grade CR2 RA1 pass pass Retroreflective ORALITE 5710 engineering Grade with the following Lettering : Black ORALITE Lettering Resistance to weathering For black Retroreflective ORALITE 5710 engineering Grade with the following screen printing Yellow ORALITE Screen Printing ink CR2 RA1 pass pass red ORALITE Screen Printing ink CR2 RA1 pass pass blue ORALITE Screen Printing ink CR2 RA1 pass pass Green ORALITE Screen Printing ink CR2 RA1 pass pass black ORALITE Screen Printing ink Tlf.: Page 4 of 11
5 Digital printing The digital printing is processed on white retroreflective with the digital printing system AGFA ANAPURNA M2050 High-Speed-UV-Inkjet-System is to be laminated with the transparent laminate ORALITE Transparent. Digital Printing Colour ORALITE 5019 UV Digital Printing Ink ORALITE Engineering Grade White ORALITE Transparent CR2 RA1 pass pass Yellow ORALITE UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Red ORALITE UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Blue ORALITE UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Green ORALITE UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Grey ORALITE UV Digital Printing CR2 RA1 pass pass ORALITE Transparent ORALITE Transparent If the colour black is printed solely, this material combination is admitted to be used without the transparent laminate. Ink Digital printing colour ORALITE 5019i UV Digital Printing Ink ORALITE Engineering Grade White ORALITE Transparent CR2 RA1 pass pass Yellow ORALITE 5019i-020 UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Red ORALITE 5019i-030 UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Blue ORALITE 5019i-050 UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Green ORALITE 5019i-060 UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Orange ORALITE 5019i-035 UV Digital Printing CR1 RA1 pass pass ORALITE Transparent Brown ORALITE 5019i-080 UV Digital Printing CR2 RA1 pass pass ORALITE Transparent Black ORALITE 5019i-070 UV Digital Printing ORALITE Transparent Clear protective overlay film: Tlf.: Page 5 of 11
6 Clear protective overlay films (Anti-Graffiti) are always admitted in combination with retroreflective a colouring process. Anti-Graffiti: The original dyed retroreflective with the screen-printing ORALITE 5018 is accepted to be laminated with the clear protective overlay film ORALITE 5095 Anti-Graffitti for the following Original dyed retroreflective ORALITE 5710 Enginering Grade with screen-printing ORALITE 5018 Red ORALITE Screen Printing Ink CR2 RA1 pass pass ORALITE 5095 Anti-Graffiti Blue ORALITE Screen Printing Ink CR2 RA1 pass pass ORALITE 5095 Anti-Graffiti Black ORALITE Screen Printing Ink ORALITE 5095 Anti-Graffiti ORALITE 5810 High Intensity Grade: Retroreflective ORALITE 5810 High Intensity Grade with the following original dyed Colour Name of product Visibility characteristics Durability Daylight Chromaticity & luminance factor For black Coefficient of retroreflection Impact resistance White ORALITE High Intensity Grade Yellow ORALITE High Intensity Grade Red ORALITE High Intensity Grade Blue ORALITE High Intensity Grade Green ORALITE High Intensity Grade Brown ORALITE High Intensity Grade Resistance to weathering For black Retroreflective ORALITE 5810 High Intensity Grade with the following Lettering : Black ORALITE Lettering Retroreflective ORALITE 5810 High Intensity Grade with the following Coloured Laminates: Yellow ORALITE Transparent Red ORALITE Transparent Blue ORALITE Transparent Green ORALITE Transparent Brown ORALITE Transparent Dark ORALITE Transparent CR1 RA2 pass pass Green Retroreflective ORALITE 5810 High Intensity Grade with the following Screen Printing Tlf.: Page 6 of 11
7 Colours: Yellow ORALITE Screen Printing Ink Red ORALITE Screen Printing Ink Blue ORALITE Screen Printing Ink Green ORALITE Screen Printing Ink Black ORALITE Screen Printing Ink Digital Printing Colours: Digital Printing Colour ORALITE 5019 UV Digital Printing Ink The digital printing is processed on white retroreflective with the digital printing system AGFA ANAPURNA M2050 High-Speed-UV-Inkjet-System is to be laminated with a transparent laminate. Digital Printing with protective laminate ORALITE Transparent ORALITE High Intensity Grade White ORALITE Transparent Yellow ORALITE UV Digital Printing Red ORALITE UV Digital Printing Blue ORALITE UV Digital Printing Green ORALITE UV Digital Printing Brown ORALITE UV Digital Printing Dark Green Grey ORALITE UV Digital Printing ORALITE UV Digital Printing CR2 RA2* pass pass *Coefficient of retroreflection: Value for printed colours 70% of RA2 Digital Printing with protective laminate ORALITE 5090 Anti-Dew : Tlf.: Page 7 of 11
8 ORALITE High Intensity Grade White ORALITE 5090 Anti-Dew Yellow ORALITE UV Digital Printing ORALITE 5090 Anti-Dew Red ORALITE UV Digital Printing ORALITE 5090 Anti-Dew Blue ORALITE UV Digital Printing CR2 RA2* pass pass ORALITE 5090 Anti-Dew Green ORALITE UV Digital Printing CR2 RA2* pass pass ORALITE 5090 Anti-Dew Brown ORALITE UV Digital Printing ORALITE 5090 Anti-Dew Dark ORALITE UV Digital Printing Green ORALITE 5090 Anti-Dew Grey ORALITE UV Digital Printing ORALITE 5090 Anti-Dew *Coefficient of retroreflection: Value for printed colours 70% of RA2 ORALITE 5090 Anti-Dew Digital Printing with protective laminate ORALITE 5095 Anti-Graffiti : ORALITE High Intensity Grade White ORALITE 5095 Anti-Graffitti Yellow ORALITE UV Digital Printing ORALITE 5095 Anti-Graffiti Red ORALITE UV Digital Printing ORALITE 5095 Anti-Graffiti Blue ORALITE UV Digital Printing CR2 RA2* pass pass ORALITE 5095 Anti-Graffiti Green ORALITE UV Digital Printing CR2 RA2* pass pass ORALITE 5095 Anti-Graffiti Braun ORALITE UV Digital Printing ORALITE 5095 Anti-Graffiti Grey ORALITE UV Digital Printing ORALITE 5095 Anti-Graffiti *Coefficient of retrorefelction: Value for printed colours 70% of RA2 ORALITE 5095 Anti-Graffiti If the colour Black is printed solely, this material combination is admitted to be used without the transparent laminate Ink Digital Printing Colour ORALITE 5019i UV Digital Printing Ink: Tlf.: Page 8 of 11
9 The digital printing is processed on white retroreflective with the digital printing system AGFA ANAPURNA M2050 High-Speed-UV-Inkjet-System is to be laminated with the transparent laminate ORALITE Transparent ORALITE High Intensity Grade White ORALITE Transparent Yellow ORALITE 5019i-020 UV Digital Printing Red ORALITE 5019i-030 UV Digital Printing Blue ORALITE 5019i-050 UV Digital Printing Green ORALITE 5019i-060 UV Digital Printing Brown ORALITE 5019i-080 UV Digital Printing Dark Green Grey Black ORALITE 5019i-625 UV Digital Printing ORALITE 5019i-073 UV Digital Printing ORALITE 5019i-070 UV Digital Printing Clear overlay film with special function: Clear overlay films with special function (anti-dew anti-graffiti) are always admitted in combination with a dyed a colouring process. Anti Dew: The dyed the combination with coloured laminates is accepted to be processed with the clear overlay film anti-dew function ORALITE 5090 Andi-Dew film for the following Dyed Retroreflective Sheeting: White ORALITE High Intensity Grade ORALITE 5090 Anti-Dew film Yellow ORALITE High Intensity Grade ORALITE 5090 Anti-Dew film Red ORALITE High Intensity Grade ORALITE 5090 Anti-Dew film Blue ORALITE High Intensity Grade ORALITE 5090 Anti-Dew film Dyed Retrofeflective Sheeting ORALITE 5810 High Intensity Grade with Coloured Laminate: Yellow ORALITE Transparent ORALITE 5090 Anti-Dew film Red ORALITE Transparent ORALITE 5090 Anti-Dew film Blue ORALITE Transparent ORALITE 5090 Anti-Dew film Dyed Retroreflective Sheeting ORALITE 5810 High Intensity Grade with Lettering film: Tlf.: Page 9 of 11
10 Black ORALITE Lettering ORALITE 5090 Anti-Dew film Anti-Graffiti: The dyed the combination with coloured laminates is accepted to be processed with the clear overlay film with anti-graffiti function ORALITE 5095 Anti Graffiti for the following colours. Dyed Retroreflective Sheeting: White ORALITE High Intensity Grade ORALITE 5095 Anti-Graffiti Yellow ORALITE High Intensity Grade ORALITE 5095 Anti-Graffiti Red ORALITE High Intensity Grade ORALITE 5095 Anti-Graffiti Blue ORALITE High Intensity Grade ORALITE 5095 Anti-Graffiti Dyed Retroreflective Sheeting ORALITE 5810 High Intensity Grade with Coloured Laminate: Yellow ORALITE Transparent ORALITE 5095 Anti-Graffiti Red ORALITE Transparent ORALITE 5095 Anti-Graffiti Blue ORALITE Transparent ORALITE 5095 Anti-Graffiti Dyed Retroreflective Sheeting ORALITE 5810 High Intensity Grade with Lettering : Black ORALITE Lettering ORALITE 5095 Anti-Graffiti External illumination: mean illuminance, uniformity of illuminance Corrosion resistence Steel pipes fins Screws, nuts washers Aluminium plate Resistence to penetration of dust water NPD NPD SP1 The pipe fins are after manufacturing hot dip galvanized to a minimum of 60µm SP2 Minimum A2, Class 70 SP1 Laquered Al-plate on exposed side if any The product can not be provided with compartments for electrical equipment Tlf.: Page 10 of 11
11 Annex 2 TECHNICAL BASIS Date Title Infra Goup Danmark ApS Calculation of minor traffic signs (ITC) Type BS, upper part Ø48,3 x 2,9, Ø48,3 x 3,0, Ø48,3 x 3.2 mm steel pipes. September 2016 Orafol Retroreflective Sheeting Oralite 5710 Engineering grade: 0913-CPD-2009/001 Annex Orafol Retroreflective Sheeting Oralite 5810 High Intensity grade: 0913-CPD-2009/035 Annex Tlf.: Page 11 of 11
Reflective Solutions Engineered to Save Lives
Traffic Signs and Construction Zones Reflective Solutions Engineered to Save Lives ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Save Lives - www.orafol.com
More informationReflective Solutions Engineered to Save Lives
Traffic Signs and Construction Zones Reflective Solutions Engineered to Save Lives Undustrial wash tapes Technology, quality & service Engineered to Save Lives As one of the world s leading manufacturers
More informationPractical Information ORALITE Reflective Films of Class RA2, Grade B for Road Safety
Page 1 of 5 1.Processing instructions for ORALITE reflective films of reflection class RA2, B These processing instructions apply to the following ORALITE reflective films of reflection class RA2, grade
More informationPractical Information ORALITE Reflective Films of Class RA3B, Grade C for Road Safety
Page 1 of 6 1. Processing instructions for ORALITE reflective films of reflection class RA3B, grade C These processing instructions apply to the following ORALITE reflective films of reflection class RA3B,
More informationRennicks stiffening channels & fixing clip conformity to EN ; 2007
Rennicks stiffening channels & fixing clip conformity to EN 1899-1; 007 Introduction This document details the performance of the Rennicks stiffening channels and fixing clips to EN 1899-1; 007. Rennicks
More informationEuropean Technical Approval ETA-07/0212
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 45 76 20 20 Fax +45 45 76 33 20 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationEuropean Technical Assessment ETA-17/1005 of
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationEuropean Technical Assessment ETA 15/0029 of 12/06/2017
RISE Research Institutes of Sweden AB RISE Certifiering Box 553 SE-371 23 Karlskrona Sweden Member of www.eota.eu Tel: +46 10 516 63 00 Web: www.ri.se Mail: certifiering@ri.se European of 12/06/2017 General
More informationAttachment to EC Certificate of Conformity O913 - CPD / O7 (7 pages)
Prüf-, Uben^/achungs- und Zerlifizierungsgemeinschaft pz!j,j. prü'on übmmchan Zerilnzleren Attachment to EC Certificate of Conformity O913 - CPD - 2012 / O7 (7 pages) The descriptions in this attachment
More informationRe-Grab Safety Gate. These industrial safety gates come pre-assembled and are easily installed.
Manufactured from durable and corrosive resistant polyurethane, the RE-GRAB Safety Gate will not corrode or degrade even in aggressive chemical environments. They are self-extinguishing to UL94 and are
More informationEuropean Technical Assessment. ETA-13/0183 of 29 June English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-13/0183 of 29 June 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationIndex Reflective Sheeting Solutions
Index Reflective Sheeting Solutions REFLEXLITE NEW MATERIAL CO., LTD. Traffic Sign Reflective Sheeting 7930 - High Intensity Prismatic Grade (HIP) 7800 / 7700 - High Intensity Grade 7600 - Engineer Grade
More informationVerbindungselemente Engel GmbH Weltestraße Weingarten DEUTSCHLAND. Manufacturing plant 74437, , ,
European Technical Assessment ETA-13/0536 of 20 February 2018 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationEuropean Technical Assessment ETA-04/0038 English translation prepared by DIBt. Page 2 of July 2016
European Technical Assessment ETA-04/0038 Page 2 of 15 29 July 2016 The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European
More informationHALFEN Anchor channel HTA / Special screw HS
DECLARATION OF PERFORMANCE HALFEN Anchor channel HTA / Special screw HS CONF-DOP_HTA 02/16-E No. H01-09/0339 1. 2. 3. 4. 5. 6. 7. 8. Unique identification code of the HALFEN Anchor channel HTA / HALFEN
More informationEuropean Technical Approval ETA-10/0413
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationCo-ordination of the Group of Notified Bodies for the Construction Products Directive 89/106/EEC. GNB-CPD Conference on CPR
GNB-CPD All Co-ordination of the Group of Notified Bodies for the Construction Products Directive 89/106/EEC NB-CPD/All-13/112 Issued: 13 June 2013 Answers to GNB- CPD questions GNB-CPD Conference on CPR
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationPrinting Materials. Engineered to Perform Better
Printing Materials Engineered to Perform Better ORAFOL s Headquarters Located just outside of Berlin in the heart of Europe, the ORAFOL Europe GmbH headquarters is the hub of the organisation s culture
More informationPowers Trak-It XH and HD nails for gas actuated tools C4 and C5
European Technical Assessment ETA-12/0188 of 7 October 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationVITREOUS ENAMEL PANEL
VITREOUS ENAMEL PANEL Enamel products have been used since a from 1370. Many examples have survived for more than 100 years and remain pristine and colourfast. dualenamel Vitreous Enamel Panels provide
More informationEuropean Technical Approval ETA-08/0007
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationEuropean Technical Assessment ETA-13/0029 of 11/07/2017
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationKEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM
S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation Information
More informationHOESCH DELIVERY RANGE SANDWICH PANELS
SANDWICH PANELS 1/3 GB Standardlieferprogramm 01/2014 FS = Food safe SINGLE SHEETS RSL = Protective coat on reverse side 2/3 GB Standardlieferprogramm 01/2014 SANDWICH PANELS LMF = laminated food film
More informationFastening material. Lindab 1. General information and theory 2. Safe 3. Silencers 4. Dampers & Measure units 5. Fire dampers & Smoke evacuation
Fastening material Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods Other circular products Transfer 0 Rectangular Flexible
More informationVALID FROM APRIL 1ST DATASHEET WORKSHOP LAMP
2018 VALID FROM APRIL 1ST DATASHEET WORKSHOP LAMP THE WORKSHOP LAMP PAGE 2 In the workshop PAGE 3 Materials Powdercoated Laquered Aluminium Copper & White Weathered Copper PAGE 4 Colours Shiny Black Black
More informationTimber fasteners for structural use
TECHNICAL INFORMATION TIMBER FASTENERS FOR STRUCTURAL USE TESTING AND CERTIFICATION TI-17 V1 Timber fasteners for structural use Testing and certification 01 INTRODUCTION Timber fasteners for structural
More informationTerms of delivery: Stock items if not sold
P R O D U C T D ATA Available sizes single rail double rail gate opening SG500 UNI DG500 UNI 300-560 SG630 UNI DG630 UNI 561-685 SG760 UNI DG760 UNI 686-810 SG890 UNI DG890 UNI 811-940 This table can be
More informationSPECIFICATIONS FOR A QUALITY LABEL FOR DECORATION OF COATED ALUMINIUM USED IN ARCHITECTURAL APPLICATIONS Edition
SPECIFICATIONS FOR A QUALITY LABEL FOR DECORATION OF COATED ALUMINIUM USED IN ARCHITECTURAL APPLICATIONS Master version ratified by the QUALIDECO Committee on 27 April 2017 Effective from 1 July 2017 Published
More informationAttachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder. Installation Instructions Revised 9/2/2016
Attachment of Residential Deck Ledger to Side of Metal Plate Connected Wood Truss Floor Ladder Installation Instructions Revised 9/2/2016 SBCA has been the voice of the structural building components industry
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: ACM 139/1905/2 Product code: 0226H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com TYPE APPROVAL CERTIFICATE
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More informationT Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic. Introduction. Contents. 1 Scope and field of application
T-26728 Pac2 standard for prevailing torque threadlocker Dri-Loc Plastic Test, material and performance specifications Introduction This standard conforms where applicable to DIN 267 part 28, DIN 267 part
More informationEuropean Technical Assessment ETA-11/0024 of 08/07/2016
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationAttachment of Residential Deck Ledger to Metal Plate Connected Wood Truss Floor Systems Overview Revised 9/2/2016
Attachment of Residential Deck Ledger to Metal Plate Connected Wood Truss Floor Systems Overview Revised 9/2/2016 SBCA has been the voice of the structural building components industry since 1983, providing
More informationSPECIFICATION FOR SAFETY POLE SIGNS & ACCESSORIES
KP/3CB/TSP/0/00 04-09-9 Page of 9 TABLE OF CONTENTS 0. Circulation List 0. Amendment Record FOREWORD. SCOPE. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING, LABELLING
More informationOptimast Installation Method Statement. F108.
Optimast Installation Method Statement. F108. Contents Page 1) Product Description. 2) Durability....... 3) Profile & Baseplate..... 4) Anchor Cradle and Foundation Stud Set Detail Drawings 4a) 127...
More informationAvery Dennison Architectural Window Films
Avery Dennison Architectural Window Films Solar Safety graphics.averydennison.eu/architectural-window Avery Dennison Architectural Window Films Avery Dennison Architectural Window Films can improve the
More informationEuropean Technical Approval ETA-08/0165
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationDIN 934 (1987) NEN 1560 NF E25-401
Hexagon nut DIN 94 (1987) NEN 1560 NF E25-401 Technical data d P m s M1 0,25 0,8 2,5 M1,2 0,25 1 M1,4 0, 1,2 M1,6 0,5 1,,2 M1,7 ( DIN) 0,5 1,4,5 M2 0,4 1,6 4 M2, ( DIN) 0,4 1,8 4,5 M2,5 0,45 2 5 M2,6 (
More information1 Scope. 2 Normative references. 3 Dimensions. Page 2 DIN :
Page 2 1 Scope This standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal. 2 Normative references This standard
More informationScotchcal Series 7725 SE
Scotchcal Series 7725 SE Special Effects Film Product Bulletin 7725 SE (UK) Release UK-J, Effective July 2004 Description Applications and Uses 3M Scotchcal Special Effects Film Series 7725 SE is intended
More informationCaravan Materials. Engineered to Perform Better
Caravan Materials Engineered to Perform Better ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Perform Better - www.orafol.com Index Caravan Materials
More informationRound Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
More informationTable and Furniture Base Fittings Table Legs and Table Bases
Square Stainless steel coloured laquered square Bright laquered square Area of application: For table and coffee tables Material: Plastic glide Finish/Colour: Table leg brushed, glide black Cross section:
More informationDERO BIKE LOCKER 33. Maximum Security
Maximum Security The Dero Bike Locker 33 offers bike parking for a single bicycle per unit, thus providing a narrower footprint when space is limited. This affordable bike locker is a perfect option for
More informationStreet Design. MALL seating. Mall bench product details. Mall technical specification. Mall accessories. Mall material finishes
Street Design established in 1986 UK street furniture designers & manufacturers, Leicestershire LE12 8LD Contact us MALL seating As UK based, designers and manufacturers, Street Design can manufacture
More informationTECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More informationEuropean Technical Assessment. ETA-14/0426 of 21 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 21 December 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationATC Air Traffic Control - Catalogue 13
ATC Air Traffic Control - Catalogue 1 Via Senatore Simonetta,2 287 Caponago (MB) - Italy tel.: +9 2.95.9.11 fax +9 2.95.9.1.11 e-mail: info@sira.mi.it www.sira.mi.it history SIRA SIRA is a privately owned
More informationPRODUCT INFORMATION
PRODUCT INFORMATION ABOUT PRODUCT DESCRIPTION Vitranamel is a prefabricated steel cassette panel system featuring a vitreous enamel finish which is applied using a special static powder enamelling process
More informationEuropean Technical Assessment. ETA-08/0285 of General Part. Technical Assessment Body issuing the ETA:
Member of SINTEF Building and Infrastructure P.O.Box 124 Blindern N-0314 Oslo Tel. 47 22 96 55 55 Fax 47 22 69 54 38TAB www.eota.eu European Technical Assessment ETA-08/0285 of 07.03.2014 General Part
More informationCEN/TC 226/WG 3 N 60. Fixed vertical road traffic signs Part 6: Retroreflective sign face materials
CEN/TC 226/WG 3 N 60 CEN/TC 226 Date: [YYYY-MM] WI 00226xxx pren 12899-6 CEN/TC 226 Secretariat: AFNOR Fixed vertical road traffic signs Part 6: Retroreflective sign face materials ICS: Descriptors: EUROPEAN
More informationSmooth and glossy III the fascinating material glass opens up new dimensions in fixture design.
Smooth and glossy the fascinating material glass opens up new dimensions in fixture design. During the past few years, glass applications in all areas of life and especially in construction engineering
More informationSign Face Materials. Material Producer List Materials and Tests Division
Sign Face Materials Material Producer List Materials and Tests Division Sign Face Materials The following manufacturers for reflective sheeting; transparent, cuttable film; and screen inks and additives
More informationSECTION STEEL LIGHTING STANDARDS. 1. Electrical conduit and fittings; Section
02760-1 of 5 SECTION 02760 STEEL LIGHTING STANDARDS 02760.01 GENERAL A. Description Steel lighting standards shall include, but not necessarily be limited to, furnishing and installing steel lighting poles,
More informationA. Product Data: For each electrical identification product indicated.
SECTION 16075 - ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION QUALITY YOU CAN MEASURE
PANIC EXIT DEVICES10 SECTION QUALITY YOU CAN MEASURE The EN1125 Classification printed on each CE branded CISA panic device identifies the appropriate characteristics of each panic device. Sect.10.1 Sect.10.2
More informationEuropean Technical Assessment. ETA-14/0426 of 15 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-14/0426 of 15 December 2014 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
More informationTO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
More informationSingle and Double Gates Operation & Maintenance Manual
R E L I A B L E S A F E A C C E S S Single and Double Gates Operation & Maintenance Manual System Overview SAFETY GATES KEE GATE is a complete range of safety gates designed specifically to provide permanent
More information21. HOT-DIP GALVANIZED COATING GUARANTEES
21. HOT-DIP GALVANIZED COATING GUARANTEES INTRODUCTION Asset owners are becoming increasingly aware of the need to prolong the maintenance-free life of their buildings, plant and equipment. This has led
More informationThread protection accessories are installed at the MODIX production factory and delivered with couplers.
Installation of MODIX Rebar Coupler Identification of the product The type of MODIX Rebar Coupler can be identified by the marking on the product. Size of the Coupler can be identified also according to
More informationmetal anchors fixed on the profile back in combination with special nib bolts Product size covered
DECLARATION OF PERFORMANCE HALFEN Anchor channel HTA 40/22P and HTA 50/30P CONF-DOP_HTA-P 01/17-E No. H01-16/0453 1. 2. 3. 4. 5. 6. Unique identification code of the HALFEN Anchor channel HTA 40/22P and
More informationEuropean Technical Assessment. ETA-12/0056 of General Part. Technical Assessment Body issuing the ETA:
Member of SINTEF Building and Infrastructure P.O.Box 124 Blindern NO-0314 Oslo, Norway Phone +47 40 00 51 00 e-mail: certification@sintef.no www.eota.eu European Technical Assessment ETA-12/0056 of 2018-12-15
More informationX-P High Performance Nail for Fastening to Concrete and Wood to Steel applications
X-P High Performance Nail for Fastening to Concrete and Wood to Steel applications Product data X-P_ MX Ø 8.2 2.4 X-P_ P8 Ø 8.2 2.4 Ø 4.0 L s L L s L Ø 4.0 Features and Benefits A specially hardened fastener
More informationEuropean Technical Assessment. ETA-08/0285 of General Part. Technical Assessment Body issuing the ETA:
Member of SINTEF Building and Infrastructure P.O.Box 124 Blindern NO-0314 Oslo, Norway Phone +47 73 59 30 00 e-mail: certification@sintef.no www.eota.eu European Technical Assessment ETA-08/0285 of 2018-09-01
More informationReflection and retroreflection
TECHNICAL NOTE RS 101 Reflection and retro Types of When looking at a reflecting surface, the surface shows an image of the space in front of the surface. The image may be complete blurred as in a surface
More informationErstantie 2, FIN Villähde Tel , Fax
www.anstar.eu 2 www.anstar.eu 3 CONTENTS Page 1 PRODUCT DESCRIPTION...4 2 MATERIALS AND STRUCTURE...4 2.1 PRODUCT RANGE...4 2.2 MATERIALS...4 2.3 MANUFACTURING...4 2.4 MANUFACTURING TOLERANCES...4 2.5
More informationITB TECHNICAL APPROVAL AT /2011
INSTYTUT TECHNIKI BUDOWLANEJ P L 0 0 6 1 1 W A R S A W, u l. F I L T R O W A 1 Phone: (48 22) 825-04-71; (48 22) 825-76-55; fax (48 22) 825-52-86 M e m b e r o f t h e E u r o p e a n U n i o n o f A g
More informationAssemblies according to the Pressure Equipment Directive - a consideration provided by the PED-AdCo Group 1 -
Assemblies according to the Pressure Equipment Directive - a consideration provided by the PED-AdCo Group 1-1 Preliminary remark... 1 2 Fundamentals... 2 2.1 Terms / criteria... 2 2.2 Scope / limitations...
More informationEuropean Technical Assessment. ETA-15/0667 of Member of. General part
INSTITU Schenkenstrasse 4 T +43 1 533 65 50 1010 Vienna Ι Austria F +43 1 533 64 23 www.oib.or.at Ι mail@oib.or.at Designated according to Article 29 of Regulation (EU) No 305/2011 Member of www.eota.eu
More informationAlfa Laval Material Standard T
Marking of material and components for heat exchangers Prepared and edited by Materials & Chemistry Centre, Tumba, Sweden Page No. of pages Revision No. Date 1 7 10 2014-04-28 COPYRIGHT Alfa Laval AB 2014.
More informationCABLE TRUNKING & ACCESSORIES
CABLE TRUNKING & ACCESSORIES STRAIGHT CABLE TRUNKING SELF TAPPING SCREW CONNECTOR H W MATERIAL & FINISHING 1 Galvanised Iron to BS2989 : 1982 & Original Finishing 2 Hot Roll Steel to JISG 3131 SPHC & HDG
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationThe Fire Resistance Performance Of Timber Or Mineral Composite Based Insulated Doorsets When Fitted With HOPPE and ARRONE Pull Handles
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : warrington@exova.com W: www.exova.com Title: The Fire Resistance Performance
More informationInstallation Manual for Thermo Panel
Installation Manual for Thermo Panel 1 About Thermo Panel is a building wrap, insulation, air and water barrier, mold inhibitor and cold bridge eliminator all-in-one. Delivering an R-value of up to 5 on
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationNext Level Security. This 2-tier locker ships flat to save on freight, comes in galvanized and powder coat finish options, and has a modular design.
T WO - T I E R B IK E LO C K E R Next Level Security We take long-term bicycle storage to new heights with the new Dero Two-Tier Bike Locker. It is easy to load and provides a space-saving solution to
More informationProduct Guide Specification
HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier
More informationENGINEERED BUILDING PRODUCTS. SplitHanger. mitek.com.au
ENGINEERED BUILDING PRODUCTS SplitHanger mitek.com.au S p l i t H a n g e r SUITABLE FOR VARIOUS WIDTHS OF TIMBER BEAM APPLICATION: SplitHangers are versatile hangers that provide a heavy duty connection
More informationEuropean Technical Assessment ETA-11/0024 of 02/03/2017
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
More informationWall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E
Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK 150-275 WA 1 - Ü 150 E 1 F Ü R D I E ZU K U N FT G E DAC HT. The alwitra waterproofing system alwitra wall flashing profiles are part of the practically
More informationCOMPACT DECK. Compact Deck SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION
COMPACT DECK SOUTHERN FOREST PRODUCTS ASSOCIATION SOUTHEASTERN LUMBER MANUFACTURERS ASSOCIATION P.O. BOX 641700 KENNER, LA 70064-1700 (504) 443-4464 FAX (504) 443-6612 www.southernpine.com Compact Deck
More informationEuropean Technical Approval ETA-10/0038
ETA-Danmark A/S Kollegievej 6 DK-2920 Charlottenlund Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 10 of the Council Directive 89/106/EEC
More informationCity of Topeka, Kansas Wayfinding Program. Revised Design Intent - REISSUED. October 10, 2018
City of Topeka, Kansas Wayfinding Program Revised Design Intent - REISSUED October 0, 08 Lake Wellington Professional Centre Studio Suite 0-Y 6 Ken Adams Way Wellington, FL 56.8.605 axiacreative.com CONTENTS
More informationTrue flatbed. True quality. True value.
:Anapurna M2540 FB True flatbed. True quality. True value. :Anapurna M2540 FB is a high-speed flat-bed, UV-curable inkjet printer for graphic screen printers, photo shops and sign shops. With a true flat-bed
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationEuropean Technical Assessment ETA-04/0101 English translation prepared by DIBt. Page 2 of 12 1 March 2018
European Technical Assessment ETA-04/0101 Page 2 of 12 1 March 2018 The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European
More informationFIRE STATION NO TH STREET NORTH ST. PETERSBURG, FL M-1 SCOPE OF WORK SYMBOL DESCRIPTION SYMBOL DESCRIPTION HVAC SYMBOL LEGEND
HVAC SYMBOL LEGEND HVAC PIPING AND VALVES LEGEND HVAC GENERAL NOTES SCOPE OF WORK SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION PHASING OF WORK HVAC ABBREVIATIONS ABBREVIATION
More informationEnglish translation authorized by DIBt Original version in German language
Date: Reference: 12/02/2014 I 36-1.14.4-104/13 English translation authorized by DIBt Original version in German language Approval number: Validity Z-14.4-407 from: 1 February 2014 Applicant: IFBS Europark
More information1. Storage and transportation. Care Instruction
This is to explain proper ways to apply REFLOMAX GLODIAN EGP, HIP and SG films to traffic signs and safety signs at construction site, etc. Even though it is impossible to explain all aspects that need
More informationINFORM COUNTER SYSTEM
DETAILS The Counter System is a modular piece of furniture. Its straight and rounded elements allow it to be used as a single counter and/or be randomly combined. The special design of the table tops and
More informationMarine applications. Engineered to Perform Better
Marine applications Engineered to Perform Better ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Perform Better - www.orafol.com Index Marine applications
More informationBrightness Transmitter
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for use 021328/05/10 Brightness Transmitter 7.1414.51.150 7.1414.51.550 ADOLF THIES GmbH & Co. KG Hauptstraße
More informationENGINEERED BUILDING PRODUCTS. I-Beam HANGERS. NEW Enhanced Capacity with YELLOW MiTek 40 x 3.75mm nails
ENGINEERED BUILDING PRODUCTS I-Beam HANGERS NEW Enhanced Capacity with YELLOW MiTek 40 x 3.75mm nails I - B e a m H a n g e r s - F a c e & T o p F i x e d FOR FACE AND TOP FIXING OF I-BEAMS TO BEAMS APPLICATION:
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue HOT-DIP GALVANIZED PRODUCTS The base material of hot-dip galvanizing is cold rolled wide coil. Metal coating is performed in course of continuous hot-dip galvanizing Sendzimir
More informationEconomic and Social Council
UNITED NATIONS E Economic and Social Council Distr. GENERAL 25 July 2005 Original: ENGLISH ENGLISH AND FRENCH ONLY ECONOMIC COMMISSION FOR EUROPE INLAND TRANSPORT COMMITTEE World Forum for Harmonization
More information