MaxiWoody. Features. The combination of filters allows the lamp color features to be changed, to make the most of the objects lit or the space.

Transcription

1 design Mario Cucinella Features 03 IP67 IK08 Direct light luminaire for use with metal halide, sodium vapour, and LEDs. The fixture is installed into the ground, wall-mounted (with a fisher). The fixture has an optical assembly and support. Optical assembly and frame in aluminium alloy; sodium-calcium tempered sealing glass, transparent colourless, 4 mm thick; superpure aluminium reflector. Optical assembly double adjustability. Graduated scale and mechanical aiming lock. High performance optics (Opti Smart) and uniform light distribution. LED C.o.B. versions with Opti Beam high-efficiency reflector Monochromatic LED version with 24/36-LED circuit, optics with plastic lenses, glass with customised serigraphy, and Vac 50/60Hz built-in electronic power supply. LED RGB and Tunable white versions complete with power supply and DMX512-RDM electronic control card. Luminaire ready for pass-through wiring. All screws are A2 stainless steel. Retention cable Slots allowing rainwater to run off Removable plate Interchangeable reflectors Glass diffuser Circular louvre Cut-Off 60 Cross-bladed louvre Visor The directional flap can be fitted individually or with others (max. 4) depending on lighting design requirements Compact Refractor for elliptical distribution Lamellar louvre Protection grid The accessories allow the features of the lighting produced by the single luminaire to be altered, for highly professional lighting effects. The combination of filters allows the lamp color features to be changed, to make the most of the objects lit or the space. The cylindrical diffuser improves the definition of the light cone SS - Superspot of LED C.o.B versions 528 products.iguzzini.com/woody_line

2 Visual comfort The MaxiWoody system boasts a vast range of accessories for guaranteeing extremely flexible, effective lighting, providing the best solution for visual comfort, avoiding unwanted glare and reducing light pollution. Full Comfort Lamellar louvre Cross-bladed louvre A wide range of anti-glare louvers for maximum visual comfort. Cut-Off 45 Cut-Off 60 Full Comfort The screening of the louvers angles apply for all sizes of floodlight products.iguzzini.com/woody_line 529

3 Optics and lamps W HIT W W HST 400W 34W HIE W 36W HSE W SS - Superspot a 6-8 S - Spot a M - Medium a W 250W HIT-DE-CE HST-DE W W F - Flood a WF - Wide Flood a E - Elliptical* * Elliptical optic is obtained by installing the respective accessories. Energy saving LED C.o.B. Colour stability Mac Adam <3 Life h L80 B10 Color temperature: Neutral white 4000K Warm white 3000K Tunable white 2700K 6000K lumen lm LED HIT G W 35W 31% W 70W 26% (3000K) LED energy saving compared with conventional lamps MaxiWoody system This range of floodlights can be installed on three pole systems: CityWoody (page 429), FrameWoody (page 435), MultiWoody (page 441). MultiWoody horizontal arms multiple wall support FrameWoody CityWoody Specifically for street lighting 530 products.iguzzini.com/woody_line

4 15 grey light source W lm optic code colour Compact 4000K - CRI 80 - Single Chip 24 W K - CRI 80 - Single Chip 24 W light source W lm optic code colour Small body 4000K - CRI 80 - Single Chip 36 W BB K - CRI 80 - Single Chip 36 W BB W W RGB Single Chip - DMX512-RDM 34 W BV W W AL W W W W AL Compact 4000K - CRI 80 - C.o.B. 24 W BU W BV53 15 Tunable white Single Chip - DMX512-RDM 36 W BV W BV55 15 Complete with power supply and electronic DMX512-RDM control card. DMX specifications require the insertion of a 120 Ohm terminating resistor (code BZQ7) to be placed between the DATA+ and DATA- cables of the last product in the line. 70 W W W BU W W BU K - CRI 80 - C.o.B. 24 W BU W BU W BU93 15 HIT-DE-CE HST-DE 70 W ST K - CRI 80 - C.o.B. dimmable DALI / Push Dim 35 W BU W BU W BU K - CRI 80 - C.o.B. dimmable DALI 52 W BV W BV W BV K - CRI 80 - C.o.B. dimmable DALI/ Push Dim 35 W BU W BU W BU K - CRI 80 - C.o.B. dimmable DALI 52 W BV W BV W BV05 15 Complete with power supply and electronic DALI control card. DALI versions occupy 1 address. 319 Complete with power supply and electronic DALI control card. DALI versions occupy 1 address. Compatible with light management systems of the iguzzini range illustrated on page 693. For the system definition, refer to the instructions. Technical data may change with technological evolution. For updated data please refer to our on-line catalogue. products.iguzzini.com/code 531

5 15 grey light source W min W max lm min lm max code colour Multipower DALI 4000K - CRI 70 - Opti Smart - ST1 optic light source W optic code colour HIT (G.E.) 250 W W W 22 W BV W K - CRI 70 - Opti Smart - ST1 optic 400 W W 22 W BT K - CRI 70 - Opti Smart - ST1.2 optic HIE (Osram) HIE (HCI-E) 250 W W 51 W BV K - CRI 70 - Opti Smart - ST1.2 optic 38 W 51 W BT93 15 Additional options: Middle of the Night, Bi-energy. The output lumen and power value of the systems refer to the Profiles with the greatest light efficiency (Profile 1 and 4). The values of other profiles can be consulted in the online catalogue: light source W optic code colour 150 W W ø HSE HIT (Osram) HST 250 W W W W HIT-DE-CE 150 W W ST HIE/M (Osram) 400 W HST-DE HSE 352 code colour USB pen profiler BZX1 04 Complete with cable and battery for LED versions installation systems ø 484 Alluminium flange for installation on poles ø 120 mm The flanges with codes are made of steel code colour code colour code colour code colour * 15 for 1 floodlight for 1 floodlight for 1 floodlight for 1 floodlight * 15 for 2 floodlights for 2 floodlights for 2 floodlights for 2 floodlights for 1 floodlight for 1 floodlight for 1 floodlight for 2 floodlights for 2 floodlights for 2 floodlights Reinforcement bracket for pole application Multiple support for two floodlights Multiple support for three floodlights Ground anchoring plate Accessory retention cable BZF * For use with reinforcement bracket code products.iguzzini.com/code Technical data may change with technological evolution. For updated data please refer to our on-line catalogue.

6 accessories ø 484 Refractor for elliptical distribution code colour code colour code colour code colour BZD for for for and for LED and for LED C.o.B. versions C.o.B. versions Glass diffuser BZD for and for LED C.o.B. versions for and for LED C.o.B. versions for for Prismatic glass diffuser for LED C.o.B. versions for LED C.o.B. versions Visor BZE for Cylindrical screen The use with prismatic glass diffuser is recommended for C.o.B. LED versions BZE for BU88 for LED C.o.B. versions BU89-BU94-BU95 Single directional flap BZE for Cut-Off 45 Cut-Off 60 BZD for for for BZE0 04 for BZ09 04 BZ26 04 BZ30 04 Full Comfort BZE3 04 BZ08 04 BZ25 04 BZ29 04 for Lamellar louvre BZE4 04 BZ23 04 BZ27 04 BZ31 04 for Cross-bladed louvre BZE5 04 BZ24 04 BZ28 04 BZ32 04 for Interchangeable reflectors for LED C.o.B. spot (8 ) flood (30 ) wide flood (48 ) Protection grid BZE products.iguzzini.com/code 533