Installation Instructions PHOTOSWITCH R Series 9000 On/Off and Timing Photoelectric Sensors
|
|
- Hugo Palmer
- 6 years ago
- Views:
Transcription
1 Installation Instructions PHOTOSWITCH R Series 9000 On/Off and Timing Photoelectric Sensors Sensing Distance All Sensors Retroreflective Polarized Retroreflective ClearSight TM Standard Diffuse Long Range Diffuse Extended Range Diffuse Transmitted Beam.m (ft).5m (5ft).0m (0ft).m (ft) 6m (00ft) 5m (500ft) 78mm(in) 9.m (0ft).9m (6ft) mm(.5in).6m (ft) m (6.5ft) 6mm(0.65in) m (0ft) m (ft) Fiber Optic Source Receiver Plastic Visible Red Glass Infrared Depends on Light Source Selected Depends on Fiber Optic Selected Transmitting LED Visible Red 660nm Infrared 880nm Infrared 880mn Visible Red 660nm Infrared 880mn Indicators Yellow: Power, Green: Output, and Red: Margin/SCP Yellow: Power, Green: Output, and Red: Margin/SCP Field of View.5_.5_ 6.5_.5_.5_ Depends on Fiber Optic Selected Sensitivity Adjustment Single Turn Potentiometer Operating Temperature -_Cto+70_C(-9_F to +58_F) Except models with solid state and relay output (see page 8). -_Cto+70_C(-9_F to +58_F) Relative Humidity 5% to 95% 5% to 95% Housing/Lens Material Valox /Acrylic Valox /Acrylic Operating Environment NEMA, X,6P,,,IP67,00 psi washdown,ip69k Approvals UL listed, CSA certified, CE marked for all applicable directives UL listed, CSA certified, CE marked for all applicable directives Protections All Versions: False Pulse, Solid State Output Versions: Short Circuit and Overload, DC Versions: Reverse Polarity All Versions: False Pulse, Solid State Output Versions: Short Circuit and Overload, DC Versions: Reverse Polarity Vibration 0-55 Hz,mm amplitude, Meets or exceeds IEC Hz,mm amplitude, Meets or exceeds IEC Shock 0G with ms pulse duration, Meets or exceeds IEC G with ms pulse duration, Meets or exceeds IEC V DC Sensors NPN and PNP Catalog Number m 00V cable G U-9000 G U-900 G C-900 G P-9000 GRP-900 GRP-9070 GRL-9000 GRL-900 G R-9000 G F-900 G F-9000 Catalog Number pin DC micro QD G U-9000-QD G U-900-QD G C-900-QD G P-9000-QD GRP-900-QD GRP-9070-QD GRL-9000-QD GRL-900-QD G R-9000-QD G F-900-QD G F-9000-QD Catalog Number pin mini QD G U-9000-QD G U-900-QD G C-900-QD G P-9000-QD GRP-900-QD GRP-9070-QD GRL-900-QD GRL-90-QD G R-9000-QD G F-900-QD G F-9000-QD Supply Current 0mA 50mA 5mA 5mA 0mA Output Energized Light/Dark Selectable Light/dark selectable Not applicable Light/Dark Selectable Current 50mA 50mA Not applicable 50mA Leakage Current 0 A 0 A Not applicable 0 Power Consumption VA max VA max VA max Response Time ms ms ms ms ms ms Not applicable 5ms ms 0-55V DC/0-0V AC Sensors SPDT EM Relay Catalog Number m 00V cable G U-900 G U-90 G P-900 GRP-90 GRR-900 G F-90 G F-900 Catalog Number 5 pin mini QD G U-900-QD G U-90-QD G P-900-QD GRP-90-QD GRR-900-QD G F-90-QD G F-900-QD Supply Current 0mA 0mA 5mA 0mA Output Energized Light/Dark Selectable Light/Dark Selectable Not applicable Light/Dark Selectable Light/Dark Selectable Current A/V AC, A/6V AC, A/50V DC A/V AC, A/6V AC, A/50V DC A/V AC, A/6V AC, A/50V DC Leakage Current Not applicable Not applicable Not applicable A/V AC, A/6V AC, A/50V DC Power Consumption. watts/.6va max. watts/.6va max.0va max Response Time 5ms 5ms 5ms 5ms ms 5ms 70-6V DC/60-6V AC Sensors SPDT EM Relay Catalog Number m 00V cable G U-900 G U-90 G C-90 G P-900 GRP-90 GRP-907 G R-900 G F-90 G F-900 Catalog Number 5 pin mini QD G U-900-QD G U-90-QD G C-90-QD G P-900-QD GRP-90-QD GRP-907-QD G R-900-QD G F-90-QD G F-900-QD Supply Current 5mA 5mA 0mA 5mA Output Energized Light/Dark Selectable Light/Dark Selectable Light/Dark Selectable Current A/V AC, A/6V AC, A/50V DC A/V AC, A/6V AC, A/50V DC A/V AC, A/6V AC, A/50V DC Leakage Current Not applicable Power Consumption watts/vamax VA max VA max Response Time 5ms 5ms 5ms 5ms 5ms 5ms ms 5ms 70-6V AC/DC Sensors Solid State Isolated N.O. Catalog Number m 00V cable G U-900 G U-90 G C-90 G P-900 GRP-90 GRR-900 G F-90 G F-900 Catalog Number pin mini QD G U-900-QD G U-90-QD G C-90-QD G P-900-QD GRP-90-QD GRR-900-QD G F-90-QD G F-900-QD Catalog Number pin AC micro QD G U-900-QD G U-90-QD G C-90-QD G P-900-QD GRP-90-QD GRL-90-QD GRR-900-QD G F-90-QD G F-900-QD Supply Current 5mA 5mA 5mA 5mA Output Energized Light/Dark Selectable Not applicable Light/Dark Selectable Light/Dark Selectable Current 00mA Not applicable 00mA 00mA Leakage Current ma at 6V AC/DC Not applicable ma at 6V AC/DC ma at 6V AC/DC Power Consumption watts/vamax VA max VA max VA max Response Time ms ms ms ms ms 5ms ms = R foron/offor T fortimerversion; = 5ms for timer versions; =8ms for timer versions; = L for linear sense potentiometer, S for teachable version, R for nonlinear sense pot., or T for timer version Transmitted Beam Source rated 0-6V AC/DC. Red: illuminates when margin 0.5x (no target) and.5x (target) 00mA for GSP and 9000 and GLP-9000 models.
2 Wiring Diagrams All Models Except Transmitted Beam Source Cable Model: 9 0 Brown White: NPN Black: PNP (+) pin DC Micro QD Model: 9 0-QD Brown White:NPN Black:PNP (+) 5 pin DC Mini QD Model: 9 0-QD Brown White:NPN Black:PNP (+) Blue (-) Blue (-) Blue (-) Cable Model: 9 Brown White Black Blue AC/DC Mini QD Model: 9 -QD Brown White Black Blue AC/DC Micro QD Model: 9 -QD Redw/White Green No Conn. Red Redw/Black L ( - )~ L ( + )~ can be placed on either black or white wire to create sourcing or sinking respectively. Cable Model: 9, 9 Brown Black (NO) White (NC) Orange (C) 5 pin AC/DC Mini QD Model: 9 -QD, 9 -QD Brown Black(NO) 5White(NC) Orange(C) Blue Blue Transmitted Beam Source Cable Model: GRL-90 T Brown Blue AC/DC Mini QD Model: GRL-90_-QD T Brown Black White Blue DC Micro QD Model: GRL-90_0-QD T Brown White Black Blue 5 pin AC/DC Micro QD Model: GRL-90_-QD T Redw/Black Green Red Redw/White
3 Typical Response Curves Retroreflective (.5) 76 () Polarized Retroreflective mm ( ) mm (.5 ) ClearSight Clear Object Detector Standard Diffuse White Paper, 6mm x 79.mm (8.5 x ) 6 (0.65) 6mm (0.65 ) 5mm (in) (ft) (ft).5m (5ft) m (0ft) 5m (50ft) 5mm (in) 50mm (6in) (ft).5m (5ft) m (0ft) 6m (0ft) 5m (50ft) 5.mm (in) 5mm (0in) 50mm (00in) 5mm (in) 50mm (6in) (ft) (ft).5m (5ft) m (0ft) 6m (0ft) Long Range Diffuse GRP-907X 0 GRP-90X Transmitted Beam, 6m (00ft), 5m (500ft) Light Source Visible Red Fiber Optic Standard Diffuse mm (0.09in)Glass Fiber.0mm (0.0in) Plastic Fiber.0mm (0.0in) Plastic Fiber Coiled 0.5mm (0.0in) Plastic Fiber White Paper 6mm X 79.mm (8.5 x ) Visible Red Fiber Optic Transmitted Beam mm (0.6in) Glass Fiber.0mm (0.0in) Plastic Fiber.0mm (0.0in) Plastic Fiber Coiled 0.5mm (0.0in) Plastic Fiber mm (0.0in Plastic Fiber Bundle 0 0.5mm (0.06in) Plastic Fiber Coiled 5.mm (in) 5mm (0in).5m (8.ft) 5.m (8ft) (ft).8m (5ft) m (0ft) 5m (50ft) 0m (00ft) 50m (500ft).5mm (0.in) 5.mm (.0in) 76.mm (.0in) (in) (in).5mm (0.in) 5mm (.0in) 76mm (.0in) (in) (in) Visible Red Fiber Optic Retroreflective mm (0.in) 0.0 (0.5mm) Plastic Fiber Coiled 5.mm (.0in) 0.5mm (0.0I) Plastic Fiber 76.mm (.0in) (in).mm (0.09I) Glass Fiber (in) With 76mm ( ).0mm (0.0I) Plastic Fiber Coiled.0mm (0.0I) Plastic Fiber.5m (59in) Infrared Fiber Optic Standard Diffuse mm (0.in) 5mm (.0in).8mm (0.5 ) Glass Fiber.5mm (0.06 )GlassFiber 50mm (6.0in) 0.69m (0.07 ) Glass Fiber (in) (in) White Paper 6mm x 79.mm (8.5 x ) Infrared Fiber Optic Transmitted Beam mm (0.in) 5mm (.0in).8mm (5 ) Glass Fiber.5mm (0.060 ) Glass Fiber 50mm (6.0in) (in) 0.69mm (0.07 ) Glass Fiber (in) Infrared Fiber Optic Retroreflective mm (0.in) 0.07 (0.69mm) Glass Fiber 5mm (.0in) 50mm (6.0in) (in) 0.5 (.8mm) Glass Fiber (in) With 78mm ( ) (.5mm) Glass Fiber.5m (59in)
4 Dimensions mm (inches) All Cable Versions Except Fiber Optic 55.6 (.90) Fiber Optic.90 (55.6) 5. (0.600) 7.9 (.950) Ref 0.6 (.080) Max. Travel 7.6 (0.00). (.670) 0.96 (0.85) 7.9 (.950) Ref 0.6 (.080) Max. Travel 6. (0.) 7.6 (0.00). (.670) 0.96 (0.85) 5. (0.05) X 8. (0.0) Slot, Plcs Cable Length m (6.5ft ) 6.5 (0.55/0.5) Dia (0.660).66 (.86) 0.00 (.575) M0 X.5 External Thread / NPSM Internal Thread 5.87 (0.65) 5.6 (0.5).9 (.650) 5. (0.05) X 8. (0.0) Slot, PLCS.69 (0.970) 0.5 (.95) Mounting Hole Centerline M0 X.5 External Thread / NPSM Internal Thread 6.76 (0.660).66 (.86) 0.00 (.575) Cable Length m (6.5ft) 6.7/ (0.5) Dia (0.65) 5.6 (0.5).9 (.650).6 (0.970) 0.5 (.95) Mounting Hole Centerline ClearSight 9000 Versions.7 (0.580).5 (0.0) 65. (.568) 0 Cable Version 00.6 (.96) Max. Travel 0.96 (0.85). (0.58) Top View 79.6 (.5) 5. (0.99).89 (.95) 7.88 (.885). (.670) 5. (0.05) x 8. (0.) Slot, Plcs (.68) 6.76 (0.660).59 (.8) 9.5 (.55) Cable Length m (6.5ft) 6.7/6. (0.55/0.5) Dia. M0 x.5 External Thread / NPSM Internal Thread 5.6 (0.5) 5.87 (0.65).6 (0.97) 0.5 (.95).9 (.65) } Centerline of Slots Connector Version Micro Style Mini Style /-0 UNF.97 (0.550) Keyways(AC) 7.78 (0.700) M x Keyway(DC) 7/8-6UN Keyway
5 Accessories mm (inches) Swivel/Tilt Mounting Assembly #60-9 Operational Notes Ambient Temperature Ratings (.) Ambient Temperature, _C (.5) (.0) 7.95 (0.) Swivel/Tilt Mounting Assembly #60-68 for ClearSight _ Adjustment in each direction 87.0 (.) (.0) Vertical Height Adjustment Brackets 7.95 (0.) 8.6 (.) Supply Voltage, V AC/DC All models of the Series 9000 with the exception of those with the solid state output (Gxx-9xx) and the EM relay output (Gxx-9xx) have a maximum operating temperature of +70_C (+58_F). The maximum operating temperature of the Gxx-9xx and Gxx-9xx models can be determined from the graph shown above. That temperature is based on the supply voltage fed to the sensor. For example, if the operating voltage is 0V AC the maximum operating temperature would be +70_C (+58_F). An operating voltage of 0V AC would limit the ambient operating temperature to +55_C (+_F). Operation of the sensor at ambient temperatures which exceed these limits could resultin sensor failure. Mounting and Wiring Securely mount the sensor on a firm, stable surface or support. A mounting which is subject to excessive vibration or shifting may cause intermittent operation. Rockwell Automation offers a wide variety of fixed and adjustable mounting brackets aswellasreflectorsandquickdisconnectcables. Refer to for further information on these products. The sensor is supplied with the hardware kit #9-0 which contains a plastic mounting nut, lock washer, M5 x 0.8 x 5 screws and nuts. Once securely mounted, the sensor may be wired as indicated in the wiring diagrams. #60-7 = height inches #60-7 = height 6 inches 0.6 (.0) #60-7 = height 8 inches #60-7 = height 0 inches. (.88) H M5x0.8x5 Combination Screws and Nuts (Supplied) 5. (6.0) 9.7 (5.5) 7.0 (0.75) Hardware Kit (Supplied) 5
6 Installing Fiber Optic Cables (GxF-9xxx versions only). Ensure that the fiber optic cable locking lever on the sensor is in the UNLOCKED position.. Insert the fiber optic cable until the internal clip mechanism is engaged.. Rotate the locking lever to the LOCK position.. Mount the fiber optic cable sensing tip end as appropriate. GRx Top View Detail Light/Dark Operate Switch Sensitivity Adjustment UNLOCK LED Status Indicators. Set lever to UNLOCK position.. Insert fibers. LOCK. Rotate lever to LOCK position. Wiring the Sensor The Series 9000 photoelectric sensor is available in one of three different connection types as identified on page. Rockwell Automation recommends the use of the 889 Series of cordsets and patchcords on the quick disconnect models. All external wiring should conform to the National Electrical Code and all applicable local codes. Configuring the Sensor All models except GSP-9000 Use the information below to align and configure the sensor. User Interface Using an instrument screwdriver, open the top cover of the sensor to gain access to the user interface panel. This panel contains a single turn sensitivity adjustment knob, a two position mode selector switch, along with three LED status indicators. Using the same screwdriver, the sensitivity can be increased (clockwise) or decreased (counterclockwise) to meet the application requirements. The factory default setting for all versions is maximum sensitivity. The Series 9000 photoelectric sensor also contains a two position selector switch. This switch is used to select either light or dark operate mode of the sensor. In light operate mode, the sensor output will turn when light is being reflected back to it (reflector for retroreflective, source for transmitted beam, or target for diffuse). In dark operate mode, the sensor output will turn OFF when no light is being reflected back to it. The table below describes the function of the three LEDstatus indicators. Label Color State Status Output Green OFF Output de energized, SCP active Output energized Margin Red OFF Margin <.5 Margin >.5 Flashing Output SCP active Power Yellow OFF Sensor not powered Sensor powered Sensor Alignment The red LED indicator is an alignment aid which indicates that a margin of.5x has been reached. This means that the sensor is receiving at least.5 times the signal strength back from the target needed to trigger an output signal. In general, it is desirable to have a higher margin to help overcome any deteriorating environmental conditions, i.e. dust buildup on the sensor's lens. When aligning the sensor, the best performance can be obtained if this margin indicator is illuminated with the target in place. It is recommended to leave the sensitivity at its default maximum setting and change it only when necessary. Transmitted Beam Versions. Visually align the emitter and receiver units (emitter and receiver fibers) until the green output LED turns (with light operate mode) or turns OFF (with dark operate mode).. To be certain that the beam is centered, it is required to sweep the emitter or receiver in the horizontal and vertical plane and determine at what position the output indicator goes and then goes OFF. Set the sensor (or fiber optics) midway between both positions. The red margin LED should also be when the beam is unbroken. IMPORTANT: Damage to single turn sensitivity adjustment knob will occur if turned beyond min/max steps. IMPORTANT After initial sensor configuration ensure that the user interface cover is closed tightly to maintain specified environmental ratings! 6
7 Retroreflective and Polarized Retroreflective Versions. Visually align the sensor (or fiber optic cable) on the reflector until the green output LED turns (with light operate mode) or turns OFF (with dark operate mode). Also verify that the red margin LED is on.. To be certain that the beam is centered, it is required to sweep the sensor in the horizontal and vertical plane and determine at what position the output indicator goes and then goes OFF. Set the sensor (or fiber optics) midway between both positions.. Break the beam with the object to be detected and check if the output indicator turns (dark operate mode). If this does not occur, turn down the sensitivity adjustment until it does. Restore the light beam by removing the object and check if the output indicator turns OFF again and that the red margin LED comes. If this does not occur, increase the size of the reflector or decrease the distance between the reflector and the sensor. Diffuse Mode. Visually align the sensor (or fiber optic cable) on the object until the green output LED turns (with light operate mode) or turns OFF (dark operate mode).. To be certain that the beam is centered, it is required to sweep the sensor in the horizontal and vertical plane and determine at what position the output indicator goes and then goes OFF. Set the sensor (or fiber optics) midway between both positions.. Remove the object in front of the sensor and eliminate any background signalsbyturningdownthe sensitivity adjustment, if such background signals exist. Replace the object and verify that the output LED goes and that the margin LED is. If the sensor continues to pick up background reflections it will be necessary to eliminate those reflections (i.e. paint with a nonreflective color) or to replace the sensor with a background suppression, sharp cutoff diffuse, or retroreflective sensing mode version. Configuring the Sensor GSP-9000 Models Use the information below to align and configure the sensor. User Interface Using an instrument screwdriver, open the top cover of the sensor to gain access to the user interface panel. This panel contains two pushbuttons and three LED status indicators. The left pushbutton is used to put the sensor into teach mode while the righthand one is for light/dark operate selection. Teach Mode The teach mode of the GSP-9000 enables the sensor to learn both the light and dark conditions presented to it and to automatically adjust sensitivity to its optimal level for the application. This mode replaces the adjustment screw of a conventional photoelectric sensor. With the sensor pointed at the light condition (target), momentarily press the Teach button until the RED indicator turns. After three seconds, this indicator will flash indicating it is ready to receive the darkcondition (background).the RED indicator will momentarily remain steady, then turn OFF. This indicates that the teach operation was successful. The GSP-9000 photoelectric sensor also contains a two position pushbutton. This button is used to select either light or dark operate mode of the sensor. In light operate mode, the sensor output will turn when light is being reflected back to it (indicated by the output LED being ). In dark operate mode, the sensor output will turn when no light is being reflected back to it. The table below describes the function of the three LED status indicators. GSP Top View Detail Teach Button LED Status Indicators Light/Dark Operate Pushbutton Configuring the Sensor GTx Models In addition to the switch and knob, some versions of the Series 9000 photoelectric sensor contain a four bank DIP switch (S...S) and two rotary knobs (R and R). These are used to configure internal,off,ande SHOTtimedelaysmakingitpossibletoprovidesomedegreeoflocalcontrolin an application. Timing Sensors Top View Detail Short/Long On Delay Light/Dark Operate One Shot/ Time Delay On Delay Adjustment Short/Long Off Delay S S S S Sensitivity Adjustment Red Margin/ SCP Indicator Green Output Indicator Yellow Power Indicator Off Delay Adjustment Note that these timers are nonretriggerable. The timing can be set for short (0.5 sec) or long (0 5 sec) duration using the DIP switches and adjusted via the two 5 turn rotary knobs. Use the illustration below to aid in configuring these timers. IMPORTANT: After initial sensor configuration ensure that the user interface cover is closed tightly to maintain specified environmental ratings! Label Color State Status OUT Yellow OFF Output de energized Output energized SET/SCP Red OFF Normal operation TeachModeActivepresentdarkcondition Flashing Teach Mode Active present light condition, Output SCP active PWR/STAB Green OFF Sensor not powered Flashing Sensor powered Unstable margin condition 7
8 Typical /OFF Timing Diffuse (Light Operate) Nonretriggerable Typical One Shot Timing Diffuse (Light Operate) Nonretriggerable Target T Target One Shot /OFF T Delayed One Shot Timing: OFF Delay T is adjusted via the off delay potentiometer with either a long (0-5sec) or short (0-.5sec) dip switch setting. T is adjusted via the on delay potentiometer with either a long (0-5sec) or short (0-.5sec) dip switch setting. DELAY OFF DELAY Timing: Delay Timing: /OFF Delay Voltage and current ratings of the overcurrent protection to be used per UL 508: Max. Current/Minimum Voltage Rating of Overcurrent Protection AWG Conductor Size Sq. mm 5 A/00V A/00V 0. A/00V 0. A/00V A/00V Application Example Product is coming down a conveyor, if the product is a white box, a kicker located seconds down the conveyor is activated to push the box down another conveyor. The kicker should extend and retract for second. The sensor is a GTP In this application an and OFF delay is required. Set the first DIP switch (S) to TD position. Switch (S) will be set to LT position. Switch (S) will be set to L position for a second delay. Switch (S) will be set to the S position. The delay will be adjusted by turning the delay pot clockwise until the proper delay time is set. The OFF delay pot will be turned clockwise so to set the one second OFF delay. PHOTOSWITCH, Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Rockwell Automation maintains current product environmental information on its website at sustainability-ethics/product-environmental-compliance.page Publication 9000-IN00B-EN-P PN Ver 0 April 05 Printed in USA 8
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors All Sensors Retroreflective Polarized Retroreflective ClearSight TM Standard Diffuse Long Range Diffuse Extended
More informationInstallation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors Polarized Transmitted Beam Fiber Optic All Sensors Retroreflective Retroreflective ClearSight TM Standard Diffuse
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationAnalog Laser Sensor. Installation Instructions. Specifications. Summary of Changes. Description. Catalog Numbers 45BPD-8LTB1-D5, 45BPD-8LTB2-D5
Installation Instructions Original Instructions Analog Laser Sensor Catalog Numbers 45BPD-8LTB1-D5, 45BPD-8LTB2-D5 Topic IMPORTANT Summary of Changes This manual contains an update to the sensing beam
More informationWORLD-BEAM QS18AFF200 Sensors with Foreground Suppression
WORLD-BEAM QS8AFF00 Sensors with Foreground Suppression Datasheet Compact sensors featuring extended range and foreground suppression mode Exceptional optical performance; up to 00 mm sensing range in
More informationGeneral-Purpose Photoelectric Sensor
General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up
More informationUniversal Voltage Cabled Photoelectric E3JK
Universal Voltage Cabled Photoelectric Small Cable Sensor with Complementary Outputs Universal AC/DC supply voltage Relay or NPN/PNP transistor output, light-on or dark-on operation Polarized retroreflective
More informationWORLD-BEAM QS18AF Sensor with Background Suppression
WORLD-BEAM QS8AF Sensor with Background Suppression Datasheet Compact sensors featuring extended range and background suppression mode Exceptional optical performance; up to 00 mm sensing range in compact
More informationSL Series Slot Sensor
Self-contained opposed-mode sensor pair Features An easy-to-use self-contained opposed-mode sensor pair in a rugged U-shaped housing Easy and economical to mount Molded-in beam guides simplify mounting
More informationQL55 Series Luminescence Sensor
Self-contained, microprocessor-based luminescence sensor Features Self-contained design in a robust, compact metal housing High sensitivity Microprocessor-controlled Senses luminescent marks, even on luminescent
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationPICO-AMP Miniature Remote Sensing System
PICO-AMP Miniature Remote Sensing System MD14 Modulated Amplifer and Ultra-small Remote Sensors PICO-AMP Features Ultra-small remote sensors to fit the tightest locations Three fixed frequency selections
More informationWORLD-BEAM QS30AF Sensor
WORLD-BEAM QS30AF Sensor Push-Button-SE Adjustable-Field Sensor Features Push-button adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects
More informationLaser Photoelectric Sensor
Laser Photoelectric Sensor Prewired DC Sensor Provides Long- Distance Sensing of Objects as Small as 0.1 mm Detect small objects over longer sensing distances with highly accurate positioning Attachable
More informationLaser Photoelectric Sensor
Sensing Supply voltage Output Laser beam Laser beam 12-24 VDC ±10% 2 m, 10 m 20 to 50 m 80 ma Laser Photoelectric Sensor Prewired DC Sensor Provides Long-Distance Sensing of Objects as Small as 0.1 mm
More informationPhotoelectric Sensors XUV Sensors with Separate Optical Heads
The XUV series of separate optical sensing heads and amplifiers provides maximum flexibility in difficult applications. Features: M 8 x Thru beam M 8 x -- Reflex Clip-on -- Thru beam Clip-on -- Reflex
More informationMULTI-BEAM LS10 Light Screen System
For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small
More informationMINI-BEAM Clear Plastic Detection Sensors
Datasheet AC-operated or DC-operated Sensors for Clear Plastic Detection Senses the presence of clear plastic materials while ignoring all other materials A highly reliable, cost-saving alternative to
More informationE3S-BT11 E3S-BR11 E3S-BD11
General Purpose Photoelectric Sensor Miniature DC Sensor with Built-in Amplifier Offers Vertical or Horizontal Single-Screw Mounting H Visible red beam H High-speed sensing, 0.5 ms response time H NEMA
More informationLong Range Metal Body Sensor
R Long Range Metal Body Sensor 30 m Range With Advanced Fuzzy Logic H Mutual interference protection H NPN/PNP switch selectable output H M12 plug-in connector H Meets IP67 and NEMA 4X, 6P H Vibration
More informationU-GAGE Q45U Long-Range Ultrasonic Sensors
U-GAGE Q45U Long-Range Ultrasonic Sensors Piezoelectric Proximity Mode Sensors with Push Button Programming of Sensing Window Limits Bipolar Discrete Outputs Features Analog models also available Models
More informationBuilt-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
More informationOperating mode. distance. 7 m Light ON Dark ON (selectable) 2 m [100 mm] (See note 1.) 100 mm (wide view)
Built-in Amplifier Photoelectric Sensor E3S-A/B Revolutionary High-performance High-quality Sensor with Built-in Amplifier can be adjusted in seconds because the optical axis coincides with the mounting
More informationPhotoelectric Sensors E51 Limit Switch Style, Modular
August 2007 E5 Limit Switch Style, Modular PG.05E.2.T.E E5 Modular Limit Switch Style Contents Overview...................... Model Selection, Assembled Sensors............. 2 Model Selection, Sensor Heads..................
More informationBuilt-in Amplifier Photoelectric Sensor
Built-in Amplifier Photoelectric Sensor Easy-to-use, Low-cost Photoelectric Sensor Incorporating s that can be clearly seen from a distance Conforms to EN and IEC standards Incorporating polarizing function,
More informationSLE30 Expert Series Teach-Mode Slot Sensor
SLE30 Expert Series Teach-Mode Slot Sensor Self-contained opposed-mode sensor pair with Teach Mode SLE30 Expert Series Slot Sensor Features An easy-to-use, self-contained opposed-mode sensor pair in a
More informationMLV12 Series Dura-Vue TM Sensors
MLV Series Dura-Vue TM Sensors Diffuse Mode with Background Evaluation See page 5 Reliable detection of all surfaces regardless of color or shape Cross-talk immunity Sensing Range: 5 mm Output: -in- Retro-Reflective
More informationUltramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
More information2 General Application Photoelectric Sensors
SMARTEYE MARK II General Purpose Photoelectric Sensor 2 General Application Photoelectric Sensors 2-13 General Application Photoelectric Sensors 2 SMARTEYE MARK II High Performance Sensor The SMARTEYE
More informationGeneral-Purpose Photoelectric Sensors with Self-Contained Amplifier
General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationWORLD-BEAM QS30 Adjustable-Field Sensors
with Background Suppression Midsize sensors featuring extended range and background suppression mode Features Bipolar discrete outputs, PNP and NPN 128 element photo receiver for superior performance on
More information10 to 30 VDC (10% max. permissable ripple peak-to-peak)
R Background Suppression Sensor Photoelectric Sensor With Adjustable Setting Distance in Rugged Metal Housing H Stable detection regardless of material color or size of sensing object: 2% or less black/white
More informationPNP. 5 to 800 mm sensor to reflector distance on BRT-60x40C NPN
Datasheet Coaxial polarized retroreflective sensor for clear object detection Reliable detection of clear, translucent, or opaque objects including PET and glass containers, transparent films, and mirror-like
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationQL50 Luminescence Sensor
Compact, self-contained luminescence sensor LISTED US Compact, self-contained design Features Senses luminescent marks, even on luminescent backgrounds and on reflective surfaces, such as ceramic, metal,
More informationW 250: Compact photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, GS Photoelectric reflex switches Through-beam photoelectric switches W 0: Compact photoelectric switch series for a broad range of applications
More informationCompact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
More informationSENSORS S62. Compact Sensors - S62. The most complete universal sensor in a compact 50x50 mm housing. Sensors with red, infrared LED or LASER emission
Compact Sensors - S6 S6 The most complete universal sensor in a compact x housing Sensors with red, infrared or LASER emission from 3 cm to m Polarized retroreflective up to 0 m Multivoltage 4-40Vac/4-60Vdc
More informationCX-20 SERIES. General purpose photoelectric sensor with full basic performance. Compact Photoelectric Sensor OTHER SUNX PRODUCTS
OTHER SUNX PRODUCTS CX- SERIES Compact Photoelectric Diagnosis Self-diagnosis PNP output Light intensity Interference type available monitor prevention Amplifier Built-in UL Recognition General purpose
More informationContrast Sensors. SICK The pioneer in contrast sensors for more than 60 years
P r o d u c t i n f o r m at i o n Contrast Sensors SICK The pioneer in contrast sensors for more than 60 years Top products Contrast sensors They put registration marks into a proper light SICK contrast
More informationSet-up and Operation Instructions
Set-up and Operation Instructions DUAL-FUNCTION BAR GRAPH Primary Function: Contrast Indicator Secondary Function: Status Indicator of Five Selectable Options QUICKSET 1. Establish one of the following
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationCylindrical Photoelectric Sensor
SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This
More informationWORLD-BEAM QS30 Series
WORLD-BEAM QS30 Series High-power opposed-mode sensors Features Infrared beam with high excess gain range over 213 m (700') Excellent noise immunity and crosstalk avoidance Excellent optical performance
More informationCONTENTS OF THE BOX. *PIR sensor only **Dual Technology and PIR sensors only. Description PIR Ultrasonic Dual Technology
Instruction Bulletin 63249-420-283A4 08/2009 Wall Mount Occupancy Sensor SLSWPS1500, SLSWUS1500, SLSWDS1500 INTRODUCTION Wall Mounted Occupancy Sensors are Class 2 devices ideal for use in business or
More informationWORLD BEAM QS30H2O Series
WORLD BEAM QS0HO Series High-Power Water Sensor Features Special emitter/receiver infrared wavelength tuned to the absorption band of water Powerful enough to burn through many types of plastic and glass
More informationE3S-CR62/67. Ideal for detecting transparent glass and plastic containers. Transparent bottle sensor. Features
bottle sensor Ideal for detecting transparent glass and plastic containers Features Stable operation even if container interval is shortened for higher productivity. Stable detection of 5 mm gaps that
More informationConnections Appearance Sensing method Sensing distance Operating mode Model Plug-in connector Horizontal Through-beam 30 m Light-ON
Heavy-duty Plug-in Photoelectric Sensor Water-resistive Photoelectric Sensor with Metal Housing & Plug-in Connector Ensuring Long Sensing Distance Satisfies the requirements of IP67, and NEMA6P. Ensures
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More informationR55 Color Mark Sensor
SWITCH POINT R55 Color Mark Sensor Color Registration Mark Sensor with Solid-State White Light Source R55 Features Outstanding color contrast sensitivity; detects 16 gray scale changes Reliably detects
More informationPhotoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
More informationACT AUTOMATIC CONTRAST TRACKING
The SMARTEYE EZ-PRO is a high performance, automatic photoelectric sensor that can be adjusted by a single push of a button. As a result, there is no guess work on the part of the operator. Now you can
More informationNA DigiParts GmbH. Small / Slim Object Detection Area Sensor
953 PHOTO PHOTO MEASURE ITY Object Area Sensor General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Cross-beam scanning system to detect slim objects Letters or business
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
337 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects. Letters or business cards detectable!
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationW 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
More informationAUTOMATIC SELF-ADJUSTING From Clean to Dirty...It Keeps On Working!
AUTOMATIC SELF-ADJUSTING From Clean to Dirty...It Keeps On Working! INTRODUCTION The SMARTEYE PRO is not a teach mode sensor; it is an automatic sensor. It is a high performance photoelectric sensor that,
More informationSensing method Appearance Sensing distance Operation mode Model. Emitter E3S-2LE4 Through-beam *1. 2 m. 0.1 to 2 m. 300 mm. 2 m
Photoelectric Sensor with Built-in Amplifier CSM DS_E 1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Ordering Information General-purpose
More informationEmitting and receiving element pitch: 10 mm in
Small / Slim Object Detection Area Sensor Cross-beam scanning system to detect slim objects Letter or visiting card detectable! Slim objects can be detected by using the cross-beam scanning system. Emitting
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationE3S-CL. Distance setting photoelectric sensor in metal housing. Features
Distance setting photoelectric sensor in metal housing High water, oil and detergent resistance Minimal black/white error for highest reliability detecting different colored objects () Features Eliminates
More informationLong sensing range. Most suitable for conveyor lines and parking lot applications. 10 m ft (Red LED)
SERIES Compact Multi-voltage Photoelectric Multi-voltage Interference prevention Multi-voltage The series can operate a to 2 V AC or to 2 V DC, which makes it suitable for supply voltages all over the
More informationWLL 170 Photoelectric switches with fibre-optic cable, red light, manual sensitivity adjustment -- DC. Dimensional drawing R1.6 2-R
WLL 0 Photoelectric switches with fibre-optic cable, red light, manual sensitivity adjustment -- DC 0... 0 mm Through-beam systems Dimensional drawing R. -R. Scanning distance 0... 0 mm. Proximity systems
More informationPHOTOELECTRIC S300 MAXI SENSORS APPLICATIONS.
PHOTOELECTRIC MAXI SENSORS sensors S300 The S300 series of advanced MAXI photoelectric sensors represents the most suitable solution for critical applications thanks to excellent performances and resistance
More informationLabel Sensor. Ordering Information. Application Example E3S-CD68/CD63. Ideal for Detecting Labels on Bottles. E3S-CD68/CD63 Label Sensor
Ideal for Detecting Labels on Bottles Satisfies the requirements of IP67. Ensures a vibration resistance of 10 Hz to 2 khz and a shock resistance of 1,000 m/s 2 (approximately 100G). Incorporates an NPN
More informationMLV40 Series Miniature Sensors
MLV4 Series Miniature Sensors Diffuse Mode See page 54 Features: Adjustable sensitivity Complementary outputs Sensing Range: 5 mm Outputs: NPN, PNP Thru-Beam Mode See page 57 Rugged metal housing Compact
More informationLX Series Part-Sensing Light Screen
Datasheet For Sensing Small or Flat Parts at High Speeds Emitter and receiver pair produce a strobed web of modulated light beams, in 8 lengths, 2 sensing ranges Simple, economical and highly reliable
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
371 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1455~ selection guide... P.271~ General precautions... P.1458~
More information2 Registration Mark Photoelectric Sensors
High Resolution/High Speed Registration Mark Sensor 2 Registration Mark Photoelectric Sensors 2-131 Registration Mark Photoelectric Sensors 2 High Resolution/High Speed Registration Mark Sensor The Mark
More informationWhen you need to see the invisible
2 When you need to see the invisible The SMARTEYE STEALTH-UV Luminescence Sensor The SMARTEYE STEALTH-UV sensor is a special purpose sensor designed to detect the presence of invisible fluorescent materials
More informationCX-440SERIES. Hysteresis 2 % & Difference in sensing range between white and black 1 %
COMPACTADJUSTABLE RANGE REFLECTIVE PHOTOELECTRIC SENSOR Amplifier Built-in CX-SERIES Conforming to EMC Directive UL Recognition Hysteresis % & Difference in sensing range between white and black 1 % Ultra
More informationNA1-11. Small / Slim Object Detection Area Sensor. Cross-beam scanning system to detect slim objects
929 PHOTO PHOTO MEASURE Object Area Sensor General terms and conditions... F-3 Related Information Glossary of terms... P.1549~ panasonic.net/id/pidsx/global guide...p.85~ General precautions... P.1552~
More informationHPA Series. Self-contained Photoelectric Controls with High Functions. Specifications CLICK FEATURES ORDER GUIDE. Pre-leaded type (2m lead)
6 HPA Series Specifications Self-contained Photoelectric Controls with Functions FEATURES Strobe Light Emission, Margin Regulation, Front Incoming Light Display, and Output Inhibit Functions Allow Sensing
More informationE3Z-LS. Distance-settable Photoelectric Sensor. Ordering Information. Sensors. Accessories (Order Separately)
Distance-settable Photoelectric Sensor Switching between background and foreground suppression (BGS/FGS) enables detecting a variety of objects under various background/foreground conditions. Influence
More informationPhotoelectric Sensor
Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly visible spot on white
More informationEX-40 SERIES. Convergent Reflective Photoelectric Sensor. Reliable object detection in limited area. Stable convergent distance sensing
313 PHOTO PHOTO Convergent Reflective Photoelectric EX-4 SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions...p.1549~ / P.1552~ guide... P.231~ Korea
More informationCustomized HP100 Sensors. HP300 Series. Customized to solve difficult application problems
Customized HP00 Sensors HP00 Series Customized to solve difficult application problems The HP00 Series: Are you faced with any of these problems? Tightly mounted thru-scan sensors interfere with each other,
More informationDistance-setting Photoelectric Sensor
Distance-setting Photoelectric Sensor The Combination of the Hyper LED and Shine-proof Achieves both Ease-of-use and High Performance Hyper LED mounted. Finest pin-point beam in the industry allows detection
More informationEmitting and Receiving Element Pitch: 10mm
Small/Slim Object Detection Area Sensor Cross-beam Scanning System to Detect Slim Objects Marked Conforming to EMC Directive Letter or Visiting Card Detectable! Slim objects can be detected by using the
More informationUSER S MANUAL. NX-5 Series. Power Supply Built-in Compact Multi-voltage Photoelectric Sensor
Power Supply Built-in Compact Multi-voltage Photoelectric Sensor NX-5 Series USER S MANUAL WUME-NX5-3 Contents 1. Cautions 3 2. Part description 4 3. Mounting 6 3-2 Mounting interval (thru-beam type NX5-M
More informationError Proofing Advanced Sensor Applications Lab (CPU20)
Error Proofing Advanced Sensor Applications Lab (CPU20) Error Proofing Advanced Sensor Applications: Hands-On Lab Traiiniing Lab Manuall WELCOME TO ERROR PROOFING ADVANCED SENSOR APPLICATIONS HANDS-ON
More informationContents. Volume 8 Sensing Solutions CA E February
Photoelectric Sensors.9 Product Description The E67 Long Range Perfect Prox Series from Eaton s electrical sector, the highest performing long-range sensor you can buy with background rejection, is ideal
More informationSensor Accessories Retroreflectors and Retroreflective Tape 8-2
- Retroreflectors and Retroreflective Tape PG.05E.17.T.E Retroreflectors Contents Overview.................... - Model Selection............... -3 Dimensions.................. -3 High Quality Retroreflectors
More informationModel WHD Weld Hole Detector Operator s Manual. Rev 1.1
Model WHD Weld Hole Detector Operator s Manual Rev 1.1 Contents 1. Introduction... 2 2. Description... 2 2.1 Model Nomenclature... 2 2.2 Operating Principle... 2 2.3 Specifications... 3 3. Location and
More informationCatalogue 1SFC en, Edition 3 November 2003 Supersedes Catalogue 1SFC en, Edition 2 November Arc Guard System TVOC
Catalogue 1SFC 266006-en, Edition 3 November 2003 Supersedes Catalogue 1SFC 266006-en, Edition 2 November 2000 Arc Guard System TVOC System units The two units of the are used as below: Approvals 1. with
More informationS30 Sensors dc-voltage Series
elf-contained dc-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments 3 mm plastic threaded barrel sensor in opposed, retroreflective or fixed-field
More informationDF-G1 Expert Dual Display Fiber Amplifier
Installation Guide Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies. For complete technical information about this product, including dimensions, accessories,
More informationHigh Reliability Of Fiber Optic Amplifier For Convenient Mounting
Amplifier Reliability Of Amplifier For Convenient Mounting Features speed response: Max. 0.5ms Auto (Button setting)/remote synchronization input, mutual interference protection, selfdiagnosis Reverse
More informationUSER S MANUAL. EX-20 Series. Amplifier Built-in Ultra-compact Type Photoelectric Sensor
Amplifier Built-in Ultra-compact Type Photoelectric Sensor EX-20 Series USER S MANUAL WUME-EX20-3 Contens 1. Cautions 3 2. Part Description 4 3. Mounting 6 3-1 Mounting the sensor 6 3-2 Mounting to sensor
More informationE3X-NL. Employs OMRON's Unique Free Angle Optics Technology for Detecting Minute Differences in Glossiness. Optical Fiber Glossy Object Sensor
Authorised Distributors:- AS & AAIN INDIA PVT TD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) Tel : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Fiber Glossy Object
More informationDeploying Current Transformers in Applications Greater Than 200 A
Deploying Current Transformers in Applications Greater Than 200 A Andrew Schaeffler Step-down Current Transformers (CTs) are common, and useful, in large motor applications. They provide isolation between
More information2 Registration Mark Photoelectric Sensors
SMARTEYE COLORMARK II 2 Registration Mark Photoelectric Sensors Contrast Sensor for Registration Marks www.ttco.com 800-237-0946 2-155 Registration Mark Photoelectric Sensors 2 SMARTEYE COLORMARK II Registration
More informationE3S-C. Built-in Amplifier Photoelectric Sensor. Water- and Oil-resistive Photoelectric Sensor with Metal Housing Ensuring Long Sensing Distance
Built-in Amplifier Photoelectric Sensor Water- and Oil-resistive Photoelectric Sensor with Metal Housing Ensuring Long Sensing Distance Satisfies the requirements of IP67, NEMA 6P, and IP67G (oil-tight).
More informationE3S-A/B. Built-in Amplifier Photoelectric Sensor. Ordering Information. Revolutionary High-performance High-quality Sensor with Built-in Amp
Built-in Amplifier Photoelectric Sensor Revolutionary High-performance High-quality Sensor with Built-in Amp can be adjusted in seconds because the optical axis coincides with the mounting axis. Highly
More informationLONG RANGE TRIGONOMETRIC AREA REFLECTIVE PHOTOELECTRIC SENSORS (AC OR DC POWER)
LG RANGE RIGOMERIC AREA REFLECIVE PHOOELECRIC SENSORS (AC OR DC POWER) MR3/MR3- Series FEAURES Long range sensors. he first long distance optical triangulation photoelectric sensors for 1 m ft. and 2 m
More informationThru-beam Sensors. Model SM800 Series. Ideal for small object detection
Model SM800 Series MICROSONIC Thru-beam Sensors Ideal for small object detection Extremely reliable thru-beam sensing in a smaller package and ranges up to 1016 mm (40") They are miniature in size, powerful
More information