HannStar Product Specification

Size: px

Start display at page:

Download "HannStar Product Specification"

Claire Norman
5 years ago
Views:

1 Document Title HSD50PU3-A Specification Page No. / 3 TO Date May. 3,2002 HannStar Product Specification Model HSD50PU3 -A Note. Please contact before designing your product based on this module specification. 2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by HannStar for any intellectual property claims or other problems that may result from application based on the module described herein.

2 Document Title HSD50PU3-A Specification Page No. 2 / 3 Record of Revisions Rev. Date Description of change HSD50PU3-A formal specification was first issued.

3 Document Title HSD50PU3-A Specification Page No. 3 / 3 Contents.0 General description. p Absolute maximum rating.. p Optical characteristics.. p Electrical characteristics.. p. 5.0 Block diagram p Interface pin connection.. p Interface timing. p Outline dimension. p Lot mark. p General precaution.. p. 30

4 Document Title HSD50PU3-A Specification Page No. 4 / 3.0 GENERAL DESCRIPTION. Introduction HannStar Display model HSD50PU3-A is a color active matrix thin film transistor (TFT) liquid crystal display(lcd) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 5 inch diagonally measured active display area with UXGA resolution (200 vertical by 600 horizontal pixel array) and can display up to 262,44 colors..2 Features 5 UXGA for Notebook PC 2ch-LVDS interface system with 6bit color data. Compatible with SPWG style-b standard..3 Applications Notebook PC Moniputers Display terminals for AV applications Monitors for industrial applications.4 General information Item Specification Unit Outline dimension(typ.) 37.3(W) 242.0(H) 6.5max (D). mm Display area 304.8(W) 228.6(H)(5.0 diagonal) mm Number of pixels 600(H) 200(V) pixels Pixel pitch 0.905(H) 0.905(V) mm Pixel arrangement Display color RGB vertical stripe 6 bit / 262,44 color Weight(typ.) 600 g Back-light Input signal Viewing direction -CCFL, Side-light type 2-ch LVDS 6 o clock Power supply voltage 3.3 V

5 Document Title HSD50PU3-A Specification Page No. 5 / 3.5 Mechanical Information Item Min. Typ. Max. Unit Module Size Horizontal(H) mm Vertical(V) mm Depth(D) mm Weight (Without inverter) g 2.0 ABSOLUTE MAXIMUM RATING 2. Absolute Rating of Environment Item Symbol Min. Max. Unit Note Storage temperature T STG Operating temperature T OPR 0 50 Operating humidity H OPR 0 80 %RH () Storage humidity H STG 0 90 %RH () Vibration(non-operating) V nop.5 G (2) Shock (non-operating) S nop G (3) Low pressure(operating) P LOP 697 hpa (4) Low pressure(non-operating) P LNOP 6 hpa (5) Note () Max wet bulb temp =39 o C (2) 5-500Hz sweep/cycle,x,y,z each directions,0.5hr each. o C o C Humidity (%) Operating Range Storage Range Temperature ( o C) 65

6 Document Title HSD50PU3-A Specification Page No. 6 / 3 (3) Half sine wave, 2ms, ±X, ±Y, ±Z direction, one time each. For this shock test, it is necessary to fill the silicon rubber between the shock jig as buffer. (4) 2 hours. (0000 feet) (5) 24 hours. (50000 feet) 2.2 Electrical Absolute Rating 2.2. TFT LCD Module Item Symbol Min. Max. Unit Note Power supply voltage V DD V () Logic input voltage V IN -0.3 V DD +0.3 V () Back-Light Unit Item Symbol Min. Max. Unit Note Lamp voltage V FL V (rms) () Lamp current I L ma (rms) () Lamp frequency f L khz () Note () Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normally operating conditions.

7 Document Title HSD50PU3-A Specification Page No. 7 / OPTICAL CHARACTERISTICS 3. Optical specification Item Symbol Condition Min. Typ. Max. Unit Note Contrast CR ()(2) Rising T R Response T R +T F time Falling T F 35 msec ()(3) White luminance (center of screen) Color chromaticity (CIE93) Viewing angle Red Green Blue White Hor. Ver. Y L cd/m 2 ()(4) (I L =6.0mA) =0 R x =0 R y Normal G x Viewing G y Angle B x B y W x W y L 40 R 40 U CR>=0 20 D 40 ()(4) Brightness uniformity B UNI =0 65 % (4) Crosstalk CT(n) = % (5) 3.2 Measuring Condition Measuring surrounding dark room Lamp current I FL 6.0 ± 0.mA(rms), lamp freq. F L =50 ± 0 khz V DD =3.3V ± 0.3V Surrounding temperature 25±2 o C 30min. warm-up time. 3.3 Measuring Equipment LCD-7000 of Otsuka Electrics Corp., which utilized MCPD-7000 for Chromaticity and BM-5A for other optical characteristics. Measuring spot size 0~2mm

8 Document Title HSD50PU3-A Specification Page No. 8 / 3 Note () Definition of Viewing Angle U 2 o clock =90 o L R =80 o =0 o D 6 o clock =270 o Note (2) Definition of Contrast Ratio(CR) measured at the center point of panel CR = Luminance with all pixels white (L63) Luminance with all pixels black (L0) Note (3) Definition of Response Time Sum of T R and T F white(tft OFF) black (TFT ON) white(tft OFF) 00% 90% TR TF Optical response 0% 0% time

9 Document Title HSD50PU3-A Specification Page No. 9 / 3 Note (4) Definition of brightness uniformity Photo-detector (BM-5A) Field=2 o 50cm LCD panel Center of panel 0 mm 0 mm mm Y 2 Y Y 600 Y 4 Y mm Luminance uniformity = (Min Luminance of 3 points) (Max Luminance of 3 points) 00%

10 Document Title HSD50PU3-A Specification Page No. 0 / 3 Note (5) Definition of crosstalk CT() ~ CT(4) L(n) LB(n) CT(n) = x 00%, n = ~ 4 L(n) Where L(n) = Luminance of point n at pattern A (cd/m 2 ), n=4 LB(n) = Luminance of point n at pattern B (cd/m 2 ), n=4 The location measured will be exactly the same in both patterns. L0 Luminance with all pixels black L63 Luminance with all pixels white Gray scale L3 Gray scale L0 Gray scale L3 4 V 8 V L() 4 V 8 V LB() V 2 V 4 V 8 V L(3) L(2) L(4) V 2 V 4 V 8 V LB(3) LB(2) LB(4) H H H 2 H H Pattern A 4 H H H H 2 H H Pattern B 4 H

Document Title HSD50PU3-A Specification Page No. / 3 4.0 ELECTRICAL CHARACTERISTICS 4. TFT LCD Module Item Symbol Min. Typ. Max. Unit Note Voltage of power supply V DD 3.0 3.3 3.

11 Document Title HSD50PU3-A Specification Page No. / ELECTRICAL CHARACTERISTICS 4. TFT LCD Module Item Symbol Min. Typ. Max. Unit Note Voltage of power supply V DD V Input voltage Current of power supply High V IH 00 MV V CM=.2V Low V IL -00 mv Mosaic I DD ma () Vsync frequency f V Hz (2) Hsync frequency f H KHz Main frequency f DCLK MHz Note () Mosaic Dot checker image L7 Grey scale L0L63. L0 Luminance with all pixels black. L63 Luminance with all pixels white. L0 Note (2) When f v is too low, a flicker may be occurred on the display.

12 Document Title HSD50PU3-A Specification Page No. 2 / Back-Light Unit The back-light system is an edge-lighting type with CCFL(Cold Cathode Fluorescent Lamp). The characteristics of the lamp are shown in following tables. Item Symbol Min. Typ. Max. Unit Note Lamp current IL MA(rms) () Lamp voltage VL V(rms) I L =6.0mA Frequency fl KHz (2) Operating life time Hr 0,000 Hour (3) Startup voltage Vs 350 V(rms) At 0 o C(4) Note () Lamp current is measured with current meter for high frequency as shown below. Specified valued are for a lamp. LCD MODULE RED WHITE(Ground) 2 A INVERTER Note (2) Lamp frequency may produce interference with horizontal synchronous frequency and this may cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. Note (3) Life time (Hr) can be defined as the time in which it continues to operate under the condition Ta=25±3 o C, I L =6.0mA(rms) and f L =5kHz until one of the following event occurs. When the brightness becomes 50% 2. When the startup voltage(vs) at 0 o C becomes higher than the maximal Value of Vs specified above. Note (4) Max. startup voltage shall be defined as max. voltage which CCFL can be startup. When the customer select the inverter, the min. value of startup voltage must be higher than CCFL s max. startup voltage

13 Document Title HSD50PU3-A Specification Page No. 3 / BLOCK DIAGRAM 5. TFT LCD Module X-driver IC Connector DC/DC Converter LVDS Receiver + Timing Controller Y-driver IC Liquid Crystal Panel pixels DDC2B E 2 PROM Gray scale Manipulation Voltage Generation 5.2 Back Light Unit 2 HOT COLD

14 Document Title HSD50PU3-A Specification Page No. 4 / INTERFACE PIN CONNECTION 6. TFT LCD Module CN ) INPUT SIGNAL (FI-XB30SR-HFA/JAPAN AVIATION ELECTRONICS INDUSTRY,LTD.) ) MATING CONNECTOR FI-X30M,FI-X30MR Terminal no. Symbol Function GND Ground 2 VDD Power Supply +3.3V 3 VDD Power Supply +3.3V 4 VEDID DDC 3.3V power 5 Reserved for supplier test point 6 ClkEDID DDC clock 7 DATAEDID DDC data 8 EIN0- EVEN Transmission Data of Pixels 0 (Negative -) 9 EIN0+ EVEN Transmission Data of Pixels 0 (Positive +) 0 GND Ground EIN- EVEN Transmission Data of Pixels (Negative -) 2 EIN+ EVEN Transmission Data of Pixels (Positive +) 3 GND Ground 4 EIN2- EVEN Transmission Data of Pixels 2 (Negative -) 5 EIN2+ EVEN Transmission Data of Pixels 2 (Positive +) 6 GND Ground 7 ECLK- EVEN Sample Clock (Negative -) 8 ECLK+ EVEN Sample Clock (Positive +) 9 GND Ground 20 OIN0- ODD Transmission Data of Pixels 0 (Negative -) 2 OIN0+ ODD Transmission Data of Pixels 0 (Positive +) 22 GND Ground 23 OIN- ODD Transmission Data of Pixels (Negative -) 24 OIN+ ODD Transmission Data of Pixels (Positive +) 25 GND Ground 26 OIN2- ODD Transmission Data of Pixels 2 (Negative -) 27 OIN2+ ODD Transmission Data of Pixels 2 (Positive +) 28 GND Ground 29 OCLK- ODD Sample Clock (Negative -) 30 OCLK+ ODD Sample Clock (Positive +) Note ) Please connects pin to nothing. Don t connect it to ground nor to other signal input. ( pin should be open.) 6.2 Back-Light Unit CN2 CCFL Power Source (BHSR-02VS-) / JAPAN SOLDERLESS TERMINAL MFG CO., LTD. Terminal no. Symbol Function V L CCFL power supply (high voltage) 2 G L CCFL power supply (low voltage)

15 Document Title HSD50PU3-A Specification Page No. 5 / 3 Basic color Gray scale of Red Gray scale of Green Gray scale of Blue Gray scale of White & Black 6.3 Relationship Between Displayed Color and Input MSB LSB MSB LSBMSB LSB Gray scale Display R5 R4 R3 R2 R R0G5 G4 G3 G2G G0B5 B4 B3 B2 B B0 level Black L L L L L L L L L L L L L L L L L L - Blue L L L L L L L L L L L L H H H H H H - Green L L L L L L H H H H H H L L L L L L - Light Blue L L L L L L H H H H H H H H H H H H - Red H H H H H H L L L L L L L L L L L L - Purple H H H H H H L L L L L L H H H H H H - Yellow H H H H H H H H H H H H L L L L L L - White H H H H H H H H H H H H H H H H H H - Black L L L L L L L L L L L L L L L L L L L0 L L L L L H L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L2 Dark Light H H H H L H L L L L L L L L L L L L L6 H H H H H L L L L L L L L L L L L L L62 Red H H H H H H L L L L L L L L L L L L Red L63 Black L L L L L L L L L L L L L L L L L L L0 L L L L L L L L L L L H L L L L L L L L L L L L L L L L L H L L L L L L L L2 Dark Light L L L L L L H H H H L H L L L L L L L6 L L L L L L H H H H H L L L L L L L L62 Green L L L L L L H H H H H H L L L L L L Green L63 Black L L L L L L L L L L L L L L L L L L L0 L L L L L L L L L L L L L L L L L H L L L L L L L L L L L L L L L L L H L L2 Dark Light L L L L L L L L L L L L H H H H L H L6 L L L L L L L L L L L L H H H H H L L62 Blue L L L L L L L L L L L L H H H H H H Blue L63 Black L L L L L L L L L L L L L L L L L L L0 L L L L L H L L L L L H L L L L L H L L L L L H L L L L L H L L L L L H L L2 Dark L3 L60 Light H H H H L H H H H H L H H H H H L H L6 H H H H H L H H H H H L H H H H H L L62 White H H H H H H H H H H H H H H H H H H White L63 L3 L60 L3 L60 L3 L60

16 Document Title HSD50PU3-A Specification Page No. 6 / Pixel Format Pixel 0 Pixel Pixel 2 Pixel 3 Pixel 4 Pixel 5 Pixel 599 Line 0 Line Line 2 Line 3 Line 4 Line 5 R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B R G B LCD Display Area 200 Lines Pixel = R G B Line 99 R G B R G B R G B R G B R G B R G B 600 Pixels R G B Note The first pixel is Even pixel.

17 Document Title HSD50PU3-A Specification Page No. 7 / RECOMMENDED TRANSMITTER TO HSD50PU3-A INTERFACE ASSIGNMENT Case EVEN DATA (6bit transmitter) THC63LVDM63A Input signal Output HSD50PU3-A Input terminal no. (Graphics controller output signal) signal interface(cn) Symbol Terminal Symbol Function Symbol Terminal Symbol TIN0/TA0 44 RE0 RED Pixels Display Data (LSB) TIN/TA 45 RE RED Pixels Display Data TIN2/TA2 47 RE2 RED Pixels Display Data TIN3/TA3 48 RE3 RED Pixels Display Data TIN4/TA4 RE4 RED Pixels Display Data TIN5/TA5 3 RE5 RED Pixels Display Data (MSB) TIN6/TA6 4 GE0 GREEN Pixels Display Data (LSB) TIN7/TB0 6 GE GREEN Pixels Display Data TIN8/TB 7 GE2 GREEN Pixels Display Data TIN9/TB2 9 GE3 GREEN Pixels Display Data TIN0/TB3 0 GE4 GREEN Pixels Display Data TIN/TB4 2 GE5 GREEN Pixels Display Data (MSB) TIN2/TB5 3 BE0 BLUE Pixels Display Data (LSB) TIN3/TB6 5 BE BLUE Pixels Display Data TIN4/TC0 6 BE2 BLUE Pixels Display Data TIN5/TC 8 BE3 BLUE Pixels Display Data TIN6/TC2 9 BE4 BLUE Pixels Display Data TIN7/TC3 20 BE5 BLUE Pixels Display Data (MSB) TIN8/TC4 22 HSY H-Sync TIN9/TC5 23 VSY V-Sync TIN20/TC6 25 DE Data Enable Signal TCLK IN /CLKIN 26 LK Data Sampling Clock TOUT0- TOUT0+ TOUT- TOUT+ TOUT2- TOUT2+ TCLK OUT- TCLK OUT+ No. 8 No. 9 No. No. 2 No. 4 No. 5 No. 7 No. 8 EIN0- EIN0+ EIN- EIN+ EIN2- EIN2+ ECLK - ECLK + EIN0 T IN6 /TA6 GE0 T IN5 /TA5 RE5 T IN4 /TA4 RE4 T IN3 /TA3 RE3 T IN2 /TA2 RE2 T IN /TA RE T IN0 /TA0 RE0 EIN T IN3 /TB6 BE T IN2 /TB5 BE0 T IN /TB4 GE5 T IN0 /TB3 GE4 T IN9 /TB2 GE3 T IN8 /TB GE2 T IN7 /TB0 GE EIN2 T IN20 /TC6 DE T IN9 /TC5 T IN8 /TC4 VSY HSY T IN7 /TC3 BE5 T IN6 /TC2 BE4 T IN5 /TC BE3 T IN4 /TC0 BE2

18 Document Title HSD50PU3-A Specification Page No. 8 / 3 Case ODD DATA(6bit transmitter) Input terminal no. THC63LVDM63A Input signal (Graphics controller output signal) Output signal HSD50PU3-A Interface(CN) Symbol Terminal Symbol Function Symbol Terminal Symbol T2IN0/TA0 44 RO0 RED Pixels Display Data (LSB) T2IN/TA 45 RO RED Pixels Display Data T2IN2/TA2 47 RO2 RED Pixels Display Data T2IN3/TA3 48 RO3 RED Pixels Display Data T2IN4/TA4 RO4 RED Pixels Display Data T2IN5/TA5 3 RO5 RED Pixels Display Data (MSB) T2IN6/TA6 4 GO0 GREEN Pixels Display Data (LSB) T2IN7/TB0 6 GO GREEN Pixels Display Data T2IN8/TB 7 GO2 GREEN Pixels Display Data T2IN9/TB2 9 GO3 GREEN Pixels Display Data T2IN0/TB3 0 GO4 GREEN Pixels Display Data T2IN/TB4 2 GO5 GREEN Pixels Display Data (MSB) T2IN2/TB5 3 BO0 BLUE Pixels Display Data (LSB) T2IN3/TB6 5 BO BLUE Pixels Display Data T2IN4/TC0 6 BO2 BLUE Pixels Display Data T2IN5/TC 8 BO3 BLUE Pixels Display Data T2IN6/TC2 9 BO4 BLUE Pixels Display Data T2IN7/TC3 20 BO5 BLUE Pixels Display Data (MSB) T2IN8/TC4 22 Non Connection(open) T2IN9/TC5 23 Non Connection(open) T2IN20/TC6 25 Non Connection(open) TCLK IN /CLKIN 26 LK Data Sampling Clock T2OUT0- T2OUT0+ T2OUT- T2OUT+ T2OUT2- T2OUT2+ T2CLK OUT- T2CLK OUT+ No. 20 No. 2 No. 23 No. 24 No. 26 No. 27 No. 29 No. 30 OIN0- OIN0+ OIN- OIN+ OIN2- OIN2+ OCLK - OCLK+ Note Please connect pin to nothing. Don t connect it to ground nor to other signal input. OIN0 T2 IN6 /TA6 GO0 T2 IN5 /TA5 RO5 T2 IN4 /TA4 RO4 T2 IN3 /TA3 RO3 T2 IN2 /TA2 RO2 T2 IN /TA RO T2 IN0 /TA0 RO0 OIN T2 IN3 /TB6 BO T2 IN2 /TB5 BO0 T2 IN /TB4 GO5 T2 IN0 /TB3 GO4 T2 IN9 /TB2 GO3 T2 IN8 /TB GO2 T2 IN7 /TB0 GO OIN2 T2 IN20 /TC6 DE T2 IN9 /TC5 T2 IN8 /TC4 VSY HSY T2 IN7 /TC3 BO5 T2 IN6 /TC2 BO4 T2 IN5 /TC BO3 T2 IN4 /TC0 BO2

19 Document Title HSD50PU3-A Specification Page No. 9 / 3 Case2 EVEN DATA (8bit transmitter) THC63LVDM83A Input terminal no. Input signal Output HSD50PU3-A (Graphics control output signal) signal Interface(CN) Symbol Terminal Symbol Function Symbol Terminal Symbol TIN0/TA0 5 RE0 RED Pixels Display Data (LSB) TIN/TA 52 RE RED Pixels Display Data TIN2/TA2 54 RE2 RED Pixels Display Data TIN3/TA3 55 RE3 RED Pixels Display Data TIN4/TA4 56 RE4 RED Pixels Display Data TIN5/TA5 3 RE5 RED Pixels Display Data (MSB) TIN6/TA6 4 GE0 GREEN Pixels Display Data (LSB) TIN7/TB0 6 GE GREEN Pixels Display Data TIN8/TB 7 GE2 GREEN Pixels Display Data TIN9/TB2 GE3 GREEN Pixels Display Data TIN0/TB3 2 GE4 GREEN Pixels Display Data TIN/TB4 4 GE5 GREEN Pixels Display Data (MSB) TIN2/TB5 5 BE0 BLUE Pixels Display Data (LSB) TIN3/TB6 9 BE BLUE Pixels Display Data TIN4/TC0 20 BE2 BLUE Pixels Display Data TIN5/TC 22 BE3 BLUE Pixels Display Data TIN6/TC2 23 BE4 BLUE Pixels Display Data TIN7/TC3 24 BE5 BLUE Pixels Display Data (MSB) TIN8/TC4 27 HSY H-Sync TIN9/TC5 28 VSY V-Sync TIN20/TC6 30 DE Data Enable Signal TIN2/TD0 50 Non Connection (open) TIN22/TD 2 Non Connection (open) TIN23/TD2 8 Non Connection (open) TIN24/TD3 0 Non Connection (open) TIN25/TD4 6 Non Connection (open) TIN26/TD5 8 Non Connection (open) TIN27/TD6 25 Non Connection (open) TCLK IN /CLKIN 3 LK DATA SAMPLING CLOCK TOUT0- TOUT0+ TOUT- TOUT+ TOUT2- TOUT2+ TOUT3- TOUT3+ TCLK OUT- TCLK OUT+ No. 8 No. 9 NO. NO.2 NO.4 NO.5 NO. 7 NO. 8 Note Please connect pin to nothing. Don t connect it to ground nor to other signal input. EIN0- EIN0+ EIN- EIN+ EIN2- EIN2+ ECLK - ECLK + EIN0 EIN EIN2 EIN3 TIN6 /TA6 GE0 TIN3 /TB6 BE TIN20 /TC6 DE TIN27 /TD6 TIN5 /TA5 RE5 TIN2 /TB5 BE0 TIN4 /TA4 RE4 TIN /TB4 GE5 TIN9 TIN8 /TC5 /TC4 VSY HSY TIN26 /TD5 TIN25 /TD4 TIN3 /TA3 RE3 TIN0 /TB3 GE4 TIN7 /TC3 BE5 TIN24 /TD3 TIN2 /TA2 RE2 TIN9 /TB2 GB3 TIN6 /TC2 BE4 TIN23 /TD2 TIN /TA RE TIN8 /TB GE2 TIN5 /TC BE3 TIN22 /TD TIN0 /TA0 RE0 TIN7 /TB0 GE TIN4 /TC0 BE2 TIN2 /TD0

20 Document Title HSD50PU3-A Specification Page No. 20 / 3 Case2 ODD DATA (8bit transmitter) THC63LVDM83A Input terminal no. Input signal Output HSD50PU3-A (Graphics control output signal) signal Interface(CN) Symbol Terminal Symbol Function Symbol Terminal Symbol T2IN0/TA0 5 RO0 RED Pixels Display Data (LSB) T2IN/TA 52 RO RED Pixels Display Data T2IN2/TA2 54 RO2 RED Pixels Display Data T2IN3/TA3 55 RO3 RED Pixels Display Data T2IN4/TA4 56 RO4 RED Pixels Display Data T2IN5/TA5 3 RO5 RED Pixels Display Data (MSB) T2IN6/TA6 4 GO0 GREEN Pixels Display Data (LSB) T2IN7/TB0 6 GO GREEN Pixels Display Data T2IN8/TB 7 GO2 GREEN Pixels Display Data T2IN9/TB2 GO3 GREEN Pixels Display Data T2N0/TB3 2 GO4 GREEN Pixels Display Data T2IN/TB4 4 GO5 GREEN Pixels Display Data (MSB) T2IN2/TB5 5 BO0 BLUE Pixels Display Data (LSB) T2IN3/TB6 9 BO BLUE Pixels Display Data T2IN4/TC0 20 BO2 BLUE Pixels Display Data T2IN5/TC 22 BO3 BLUE Pixels Display Data T2IN6/TC2 23 BO4 BLUE Pixels Display Data T2IN7/TC3 24 BO5 BLUE Pixels Display Data (MSB) T2IN8/TC4 27 Non Connection (open) T2IN9/TC5 28 Non Connection (open) T2IN20/TC6 30 Non Connection (open) T2IN2/TD0 50 Non Connection (open) T2IN22/TD 2 Non Connection (open) T2IN23/TD2 8 Non Connection (open) T2IN24/TD3 0 Non Connection (open) T2IN25/TD4 6 Non Connection (open) T2IN26/TD5 8 Non Connection (open) T2IN27/TD6 25 Non Connection (open) T2CLK IN /CLKIN 3 LK DATA SAMPLING CLOCK T2OUT0- T2OUT0+ T2OUT- T2OUT+ T2OUT2- T2OUT2+ T2OUT3- T2OUT3+ T2CLK OUT- T2CLK OUT+ No. 20 No. 2 NO.23 NO.24 NO.26 NO.27 NO. 29 NO. 30 OIN0- OIN0+ OIN- OIN+ OIN2- OIN2+ OCLK - OCLK + Note Please connect pin to nothing. Don t connect it to ground nor to other signal input. OIN0 OIN OIN2 OIN3 T2IN6 /TA6 GO0 T2IN3 /TB6 BO T2IN20 /TC6 T2IN27 /TD6 T2IN5 /TA5 RO5 T2IN2 /TB5 BO0 T2IN9 /TC5 T2IN26 /TD5 T2IN4 /TA4 RO4 T2IN /TB4 GO5 T2IN8 /TC4 T2IN25 /TD4 T2IN3 /TA3 RO3 T2IN0 /TB3 GO4 T2IN7 /TC3 BO5 T2IN24 /TD3 T2IN2 /TA2 RO2 T2IN9 /TB2 GO3 T2IN6 /TC2 BO4 T2IN23 /TD2 T2IN /TA RO T2IN8 /TB GO2 T2IN5 /TC BO3 T2IN22 /TD T2IN0 /TA0 RO0 T2IN7 /TB0 GO T2IN4 /TC0 BO2 T2IN2 /TD0

21 Document Title HSD50PU3-A Specification Page No. 2 / INTERFACE TIMING )2)3)4)5)6) 7. Timing Parameters (Hsync, Vsync and DE mode) Item Symbol Min. Typ. Max. Unit Frame Period t 20 t4 250 t4 250 t Ms Vertical Display Term t2 200 t4 200 t4 200 t4 Vertical Blanking Term t3 0 t4 50 t4 50 t4 Line Scanning Time t4 040 t7 080 t7 080 t Us Horizontal Display Term t5 800 t7 800 t7 800 t7 Horizontal Blanking Term t6 240 t7 280 t7 280 t7 Clock Period t Ns V-Sync Pulse Width tvw 2 t4 V-Sync Set up Time tvsu 8 t7 V-Sync Hold Time tvhd 8 t7 Vertical Front Porch tvfp 2 t4 Vertical Data Sync Period tvds 8 t4 Horizontal Period th 040 t7 080 t7 080 t7 H-Sync Pulse Width thw 4 t7 Horizontal Front Porch thfp 4 t7 Horizontal Data Sync Period thds t6 - thfp t6 - thfp t6 - thfp DE Pulse Width twde 800 t7 800 t7 800 t7 Clock Low time t8 5 Ns High time t9 5 Ns Data Setup time t0 2 Ns Hold time t 5 Ns t3 = tvfp + tvds t4 = th t6 = thfp + thds Note ) Refer to 7.2 Timing Chart and LVDS(THC63LVDF84A) specifications by THine Electronic,Inc.. Note 2) If ENAB is fixed to H or L level for certain period while LK is supplied, the panel displays black with some flicker. Note 3) If LK is fixed to H or L level for certain period while ENAB is supplied, the panel may be damaged. Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving condition(especially driving frequency),even if the condition satisfies above timing specifications and recommended operating conditions shown in 3. Note 5) Do not make t,t2,t3 and tvds fluctuate. If t,t2,t3 and tvds are fluctuate, the panel displays black. Note 6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred. Note 7) LK count of each Horizontal Scanning Time should be always the same. V-Blanking period should be n X Horizontal scanning Time (n integer). Frame period should be always the same.

22 Document Title HSD50PU3-A Specification Page No. 22 / Timing Diagram of Interface Signal (Hsync, Vsync and DE mode) 7.2. Vertical Timing Horizontal Timing

23 Document Title HSD50PU3-A Specification Page No. 23 / SY Timing

24 Document Title HSD50PU3-A Specification Page No. 24 / 3 a b.65(v) Duty(a,b)50±0% t 7 t 8 t 9 LK V IH (MIN) 2.64 (V) V IL (MAX) 0.66 (V) ENAB OR5-OR0 OG5-OG0 OB5-OB0 ER5-ER0 EG5-EG0 EB5-EB0 t 0 t VALID DATA V IH (MIN) 2.64 (V) V IL (MAX) 0.66 (V)

25 Document Title HSD50PU3-A Specification Page No. 25 / Power ON/OFF Sequence Power On Power Off Power Supply 3.0V 0.2 V 0V Signal T T2 T3 0% Valid Signal 0% 90% 90% 3.0V 0.2V 0.2V T4 Backlight (Recommended) T5 T6 50% 50% Power ON/OFF Sequence Item Min. Typ. Max. Unit Remark T 0 0 msec T msec T msec T4 400 msec T5 200 msec T6 200 msec Note () The supply voltage of the external system for the module input should be the same as the definition of V DD. (2) Apply the lamp volatge within the LCD operation range. When the back-light turns on before the LCD operation or the LCD truns off before the back-light turns off, the display may momentarily become white. (3) In case of V DD = off level, please keep the level of input signal on the low or keep a high impedance. (4) T4 should be measured after the module has been fully discharged between power off and on period. (5) Interface signal shall not be kept at high impedance when the power is on.

26 Document Title HSD50PU3-A Specification Page No. 26 / OUTLINE DIMENSION 8. Front View Outline Dimension Unit mm

27 Document Title HSD50PU3-A Specification Page No. 27 / Back View Outline Dimension

28 Document Title HSD50PU3-A Specification Page No. 28 / Tolerance of distance between active area and bezel opening ab.0 mm cd.0 mm LCD c a b Bezel opening d Active area

29 Document Title HSD50PU3-A Specification Page No. 29 / LOT MARK 9. Lot Mark code,2,3,4,5,6 HannStar internal flow control code. code 7 production location. code 8 production year. code 9 production month. code 0,,2,3,4,5 serial number. Note () Production Year Year Mark Note (2) Production Month Month Jan. Feb. Mar. Apr. May. Jun. Jul. Aug. Sep. Oct Nov. Dec. Mark A B C 9.2 Location of Lot Mark () The label is attached to the backside of the LCD module. (2) This is subject to change without prior notice. HSD50PU3-A Rev Lot mark

30 Document Title HSD50PU3-A Specification Page No. 30 / GENERAL PRECAUTION 0. Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 0.2 Disassembling or Modification Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module. 0.3 Breakage of LCD Panel 0.3. If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin If liquid crystal contacts mouth or eyes, rinse out with water immediately If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water Handle carefully with chips of glass that may cause injury, when the glass is broken. 0.4 Electric Shock 0.4. Disconnect power supply before handling LCD module Do not pull or fold the CCFL cable Do not touch the parts inside LCD modules and the fluorescent lamp s connector or cables in order to prevent electric shock. 0.5 Absolute Maximum Ratings and Power Protection Circuit 0.5. Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts parameters, environmental temperature, etc., otherwise LCD module may be damaged Please do not leave LCD module in the environment of high humidity and high temperature for a long time It s recommended to employ protection circuit for power supply. 0.6 Operation 0.6. Do not touch, push or rub the polarizer with anything harder than HB pencil lead Use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the LCD module for incoming inspection or assembly When the surface is dusty, please wipe gently with absorbent cotton or other soft material.

31 Document Title HSD50PU3-A Specification Page No. 3 / Wipe off saliva or water drops as soon as possible. If saliva or water drops contact with polarizer for a long time, they may causes deformation or color fading When cleaning the adhesives, please use absorbent cotton wetted with a little petroleum benzine or other adequate solvent. 0.7 Mechanism Please mount LCD module by using mounting holes arranged in four corners tightly. 0.8 Static Electricity 0.8. Protection film must remove very slowly from the surface of LCD module to prevent from electrostatic occurrence Because LCD module use CMOS-IC on circuit board and TFT-LCD panel, it is very weak to electrostatic discharge. Please be careful with electrostatic discharge. Persons who handle the module should be grounded through adequate methods. 0.9 Strong Light Exposure The module shall not be exposed under strong light such as direct sunlight. Otherwise, display characteristics may be changed. 0.0 Disposal When disposing LCD module, obey the local environmental regulations.

Document Title HSD121PX12-A Product Information Page No. 1 / 26. Document No. Revision 1.0. HannStar Product Information. Model : HSD121PX12 -A

Document Title HSD121PX12-A Product Information Page No. 1 / 26 HannStar Product Information Model HSD121PX12 -A Note 1. Please contact before designing your product based on this module specification.