ColorAnt Measurement Data Report

Transcription

1 ColorAnt Measurement Data Report Chart Information Number of patches 1617 Device data CMYK Measurement data Remission ISO FILE_DESCRIPTOR FOGRA51 ORIGINATOR Fogra, developed by GMG GmbH & Co. KG, Heidelberger Druckmaschinen AG CREATED May 215 TARGET_TYPE ISO INSTRUMENTATION D5, 2 degree, geometry 45/, no polarisation filter, white backing, according to ISO 13655:29 M1 PRINT_CONDITIONS Offset printing, according to ISO :213, OFCOM, print substrate 1 = premium coated, fluorescence moderate (8-14 DeltaB according to ISO 15397), 115 g/m2, tone value increase curves A (CMYK) KEYWORD Multiple values TRACEABILITY NIST NUMBER_OF_FIELDS 41 NUMBER_OF_SETS 1617 SAMPLE_ID Multiple values 2. General Patches

2 ColorAnt Measurement Data Report Page 2 Brightener Brightener detected based on spectral analysis. Brightener correction would change paper white by DeltaE Printing standard Selected profile: Best profile: ISO Coated v2 (ECI) (79% match) PSOcoated_v3_TAC3_K96.icc (1% match) 3. Color Comparison CMYK PatchID L a b C h de¹ dh/dl¹ Substrate/Paper white / / / dh Maximum 1 / 1 / / dh Full Primary 1 / / / dh / 1 / / dh / / 1 / dh / / / dl Full (CMY) Secondary 1 / 1 / / dh 1 / / 1 / dh / 1 / 1 / dh Maximum Primary / 2 / / dh Maximum (CMY) Secondary 7 / 7 / / dh (1) ISO Coated v2 (ECI) The de values shown are according to your choice: DeltaE-76 CMYK PatchID L a b C h de¹ dh/dl¹ Highlight 2 / / / dh / 2 / / dh / / 2 / dh / / / dh Midtone 5 / / / dh / 5 / / dh / / 5 / dh / / / dh (1) ISO Coated v2 (ECI) The de values shown are according to your choice: DeltaE-76

3 ColorAnt Measurement Data Report Page 3 CMYK PatchID L a b C h de¹ dh/dl¹ Near Neutral (CMY) 5 / 4 / 4 / dh CMY Black 1 / 1 / 1 / dh CMYK Black 1 / 1 / 1 / dh Maximum Duplex / 1 / / dh Maximum Triplex 1 / 1 / / dh (1) ISO Coated v2 (ECI) The de values shown are according to your choice: DeltaE-76

4 ColorAnt Measurement Data Report Page 4 4. Gradations L a b C h Density Cyan 2.% Cyan 3.% Cyan 5.% Cyan 7.% Cyan 1.% Cyan 15.% Cyan 2.% Cyan 25.% Cyan 3.% Cyan 4.% Cyan 5.% Cyan 55.% Cyan 6.% Cyan 7.% Cyan 75.% Cyan 8.% Cyan 85.% Cyan 9.% Cyan 95.% Cyan 98.% Cyan 1.% Magenta 2.% Magenta 3.% Magenta 5.% Magenta 7.% Magenta 1.% Magenta 15.% Magenta 2.% Magenta 25.% Magenta 3.% Magenta 4.% Magenta 5.% Magenta 55.% Magenta 6.% Magenta 7.% Magenta 75.% Magenta 8.% Magenta 85.% Magenta 9.% Magenta 95.% Magenta 98.% Magenta 1.% Yellow 2.% Yellow 3.% Yellow 5.% Yellow 7.% Yellow 1.% Yellow 15.% Yellow 2.% Density calculated according to method: Status-E Densities are expressed in paper relative values.

5 ColorAnt Measurement Data Report Page 5 L a b C h Density Yellow 25.% Yellow 3.% Yellow 4.% Yellow 5.% Yellow 55.% Yellow 6.% Yellow 7.% Yellow 75.% Yellow 8.% Yellow 85.% Yellow 9.% Yellow 95.% Yellow 98.% Yellow 1.% Black 2.% Black 3.% Black 5.% Black 7.% Black 1.% Black 15.% Black 2.% Black 25.% Black 3.% Black 4.% Black 5.% Black 6.% Black 7.% Black 75.% Black 8.% Black 85.% Black 9.% Black 95.% Black 98.% Black 1.% Density calculated according to method: Status-E Densities are expressed in paper relative values.

6 ColorAnt Measurement Data Report Page 6 5. Linearity Colorimetric Linearity: The diagram shows the colorimetric linearity of the primaries. Flat curves indicate good linearity, that is the deltae to white and solid color is proportional. 25% % 1% -25% Cyan Tone Value Linearity Tone Value Linearity Magenta Tone Value Linearity Tone Value Linearity Yellow Tone Value Linearity Tone Value Linearity Black Tone Value Linearity Tone Value Linearity

7 ColorAnt Measurement Data Report Page 7 6. Curves Ink Value (%)

8 ColorAnt Measurement Data Report Page Ink Value (%) Chosen Profile¹ Cyan Tone Value 2.% 3.% 5.% 7.% 1.% 15.% 2.% 25.% 3.% 4.% 5.% 55.% 6.% Chosen Profile¹ Tone Value 7.% 75.% 8.% 85.% 9.% 95.% 98.% Chosen Profile¹ (1) ISO Coated v2 (ECI)

9 ColorAnt Measurement Data Report Page Ink Value (%) Chosen Profile¹ Magenta Tone Value 2.% 3.% 5.% 7.% 1.% 15.% 2.% 25.% 3.% 4.% 5.% 55.% 6.% Chosen Profile¹ Tone Value 7.% 75.% 8.% 85.% 9.% 95.% 98.% Chosen Profile¹ (1) ISO Coated v2 (ECI)

10 ColorAnt Measurement Data Report Page Ink Value (%) Chosen Profile¹ Yellow Tone Value 2.% 3.% 5.% 7.% 1.% 15.% 2.% 25.% 3.% 4.% 5.% 55.% 6.% Chosen Profile¹ Tone Value 7.% 75.% 8.% 85.% 9.% 95.% 98.% Chosen Profile¹ (1) ISO Coated v2 (ECI)

11 ColorAnt Measurement Data Report Page Ink Value (%) Chosen Profile¹ Black Tone Value 2.% 3.% 5.% 7.% 1.% 15.% 2.% 25.% 3.% 4.% 5.% 6.% 7.% Chosen Profile¹ Tone Value 75.% 8.% 85.% 9.% 95.% 98.% Chosen Profile¹ (1) ISO Coated v2 (ECI)

12 ColorAnt Measurement Data Report Page Spider Web 1 b a ISOcoated_v2_eci.icc 1 b a Printing standard Selected profile: Best profile: ISO Coated v2 (ECI) (79% match) PSOcoated_v3_TAC3_K96.icc (1% match)

13 ColorAnt Measurement Data Report Page CMYK Distribution This diagram shows the distribution of the CMYK patches. The dots show CMYK combinations ordered by black (x axis) and TAC of CMY (y axis). A good, generic testchart should have colors on all edges. The patches should be distributed evenly, typically with less patches on the right side (high black amount). There shouldn't be large holes, because this limits the flexibility for different separation methods. 3% CMY % % K 1% This diagram shows the number of CMYK patches (y axis) for different black levels (x axis). Typically there are less patches on the right side (high black amount). 1 Count % K 1%

14 ColorAnt Measurement Data Report Page Quality Evaluation Details: Number of redundant patches Redundancy Delta Correction Delta Smoothing Delta 58 in 29 group(s).1 (max).1 (max),. (average).44 (max),.12 (average)