T30 Sensors AC-Voltage Series
|
|
- Bertina Cox
- 5 years ago
- Views:
Transcription
1 T3 ensors -Voltage eries nstruction Manual elf-ontained, -Operated ensors Featuring Z-BM technology, specially designed optics and electronics provide reliable sensing without adjustments T style PBT polyester housing with 3 mm threaded lens in opposed, retroreflective, or fixedfield modes ompletely epoxy-encapsulated providing superior durability, even in harsh sensing environments, rated to D P69K nnovative dual-indicator system takes the guesswork out of sensor performance monitoring 2 V ac to 25 V ac (3-wire); PT solid-state switch output, maximum load 3 m WR: ot To Be Used for Personnel Protection ever use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models ensing Mode Model Output Range LD T33 - T3W3R 6 m (2 ft) nfrared, 95 nm OPPOD T3RW3R P T3W3LP T3RW3LP 6 m (2 ft) Visible red, 68 nm POLR RTRO T3W3FF2 T3RW3FF2 2 mm (8 in) cutoff FD-FLD T3W3FF4 T3RW3FF4 T3W3FF6 T3RW3FF6 4 mm (6 in) cutoff 6 mm (24 in) cutoff nfrared, 88 nm Fixed-Field Mode Overview T3 self-contained fixed-field sensors are small, powerful, infrared diffuse mode sensors with far-limit cutoff (a type of background suppression). Their high excess gain and fixed-field technology allow detection of objects of low reflectivity, while ignoring background surfaces. The cutoff distance is fixed. s and background objects must always be placed beyond the cutoff distance. Fixed-Field ensing Theory of Operation The T3 Fixed-Field sensor compares the reflections of its emitted light beam () from an object back to the sensor's two differently aimed detectors, R and. ee Figure on page 2. f the near detector's (R) light signal is stronger than the far detector's () light signal (see object in the Figure below, closer than the cutoff distance), the sensor responds to the object. f the far detector's () light signal is stronger than the near detector's (R) light signal (see object B in the Figure below, beyond the cutoff distance), the sensor ignores the object. tandard 2 m (6.5 ft) cable models are listed. 9 m (3 ft) cable: add suffix W/3 (for example, T33 W/3). 4-pin Micro-style integral QD: add suffix Q (for example, T33Q). model with a QD connector requires a mating cable; see ordsets on page 6. Original Document 2523 Rev. 2 October
2 T3 ensors -Voltage eries The cutoff distance for the T3 is fixed at 2, 4, or 6 millimeters (7.9 inch, 6.7 inch, or 23.6 inch). Objects lying beyond the cutoff distance are usually ignored, even if they are highly reflective. However, under certain conditions, it is possible to falsely detect a background object (see Reflectivity and Placement on page 2). ear Detector Receiver lements R Lenses Object utoff Object B or Far Detector mitter ensing Range R ensing xis Object is sensed if amount of light at R is greater than the amount of light at Figure. Fixed-Field oncept Figure 2. Fixed-Field ensing xis n the drawings and information provided in this document, the letters, R, and identify how the sensor's three optical elements (mitter "", ear Detector "R", and Far Detector "") line up across the face of the sensor. The location of these elements defines the sensing axis, see Figure 2 on page 2. The sensing axis becomes important in certain situations, such as those illustrated in Figure 5 on page 3 and Figure 6 on page 3. ensor etup ensing Reliability For highest sensitivity, position the target for sensing at or near the point of maximum excess gain. Maximum excess gain for all models occurs at a lens-to-object distance of about 4 mm (.5 in). ensing at or near this distance makes the maximum use of each sensor s available sensing power. The background must be placed beyond the cutoff distance. ote that the reflectivity of the background surface also may affect the cutoff distance. Following these guidelines improves sensing reliability. Reflectivity and Placement void mirror-like backgrounds that produce specular reflections. false sensor response occurs if a background surface reflects the sensor's light more to the near detector (R) than to the far detector (). The result is a false O condition (Figure 3 on page 3). orrect this problem by using a diffusely reflective (matte) background, or angling either the sensor or the background (in any plane) so the background does not reflect light back to the sensor (Figure 4 on page 3). Position the background as far beyond the cutoff distance as possible. n object beyond the cutoff distance, either stationary (and when positioned as shown in Figure 5 on page 3), or moving past the face of the sensor in a direction perpendicular to the sensing axis, may cause unwanted triggering of the sensor if more light is reflected to the near detector than to the far detector. orrect the problem by rotating the sensor 9 (Figure 6 on page 3). The object then reflects the R and fields equally, resulting in no false triggering. better solution, if possible, may be to reposition the object or the sensor Tel: P/ 2523 Rev.
3 T3 ensors -Voltage eries utoff R = ear Detector = Far Detector = mitter utoff T3FF Fixed ensing Field T3FF R ore of mitted Beam trong Direct Reflection to R R ore of mitted Beam trong Direct Reflection way From ensor Fixed ensing Field Figure 3. - Problem R = ear Detector = Far Detector = mitter Figure 4. - olution T3FF utoff T3FF utoff R,, R R = ear Detector = Far Detector = mitter Fixed ensing Field or Moving Object = mitter = Far Detector R = ear Detector Fixed ensing Field or Moving Object reflective background object in this position or moving across the sensor face in this axis and direction may cause a false sensor response. Figure 5. Object Beyond utoff - Problem reflective background object in this position or moving across the sensor face in this axis is ignored. Figure 6. Object Beyond utoff - olution olor ensitivity The effects of object reflectivity on cutoff distance, though small, may be important for some applications. t is expected that at any given cutoff setting, the actual cutoff distance for lower reflectance targets is slightly shorter than for higher reflectance targets. This behavior is known as color sensitivity. For example, an excess gain of for an object that reflects / as much light as the 9% white card is represented by the horizontal graph line at excess gain =. n object of this reflectivity results in a far limit cutoff of approximately 9 mm (7.5 inch) for the 2 mm (8 inch) cutoff model, for example; and 9 mm represents the cutoff for this sensor and target. These excess gain curves were generated using a white test card of 9% reflectance. Objects with reflectivity of less than 9% reflect less light back to the sensor, and thus require proportionately more excess gain in order to be sensed with the same reliability as more reflective objects. When sensing an object of very low reflectivity, it may be especially important to sense it at or near the distance of maximum excess gain. Wiring Diagrams abled mitters Quick Disconnect mitters (4-pin Micro-tyle) bn bu 2-25V ac rd/bk rd/wh rd gn 2-25 V ac o onnection ll Other abled Models ll Other Quick Disconnect Models (4-pin Micro-tyle) bn bu 2-25V ac rd/bk rd/wh 2-25 V ac bk Load rd gn Load o onnection P/ 2523 Rev. - Tel:
4 T3 ensors -Voltage eries pecifications upply Voltage and urrent 2 V ac to 25 V ac (5 Hz to 6 Hz) verage current: 2 m Peak current: 2 m at 2 V ac 5 m at 2 V ac 75 m at 25 V ac upply Protection ircuitry Protected against transient voltages Output onfiguration PT solid-state ac switch; three-wire hookup; light operate or dark operate, depending on model Light Operate: Output conducts when sensor sees its own (or the emitter s) modulated light Dark Operate: Output conducts when the sensor sees dark Output Rating 3 m maximum (continuous) Fixed-Field models: derate 5 m/ above +5 (+22 F) nrush capability: amp for 2 ms, non-repetitive OFF-state leakage current: < m O-state saturation voltage: 3 V at 3 m ac; 2 V at 5 m ac Required Overcurrent Protection WR: lectrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via urrent Limiting, lass 2 Power upply. upply wiring leads < 24 W shall not be spliced. For additional product support, go to upply Wiring (W) Required Overcurrent Protection (mps) Output Protection ircuitry Protected against false pulse on power-up Output Response Time Opposed mode: 6 ms O, 8 ms OFF Other models: 6 ms O and OFF ote: ms delay on power-up; outputs do not conduct during this time. Repeatability Opposed mode: 2 ms Other models: 4 ms Repeatability and response are independent of signal strength ndicators Two LDs (reen and mber) reen O steady: power to sensor is O mber O steady: sensor sees light mber flashing: excess gain marginal ( to.5 times) in light condition onstruction PBT polyester housing; polycarbonate (opposed-mode) or acrylic lens nvironmental Rating Leakproof design rated M 6P, D P69K onnections 2 m (6.5 ft) integral PV cable, or ntegral 4-pin Micro-style quick disconnect Operating onditions Temperature: 4 to +7 ( 4 F to +58 F) Humidity: 9% at +5 maximum relative humidity (non-condensing) Vibration and Mechanical hock ll models meet ML-TD-22F, Method 2 (Vibration: Hz to 6 Hz maximum,.6 inch (.52 mm) double amplitude, acceleration) requirements. Method 23B conditions H&. (hock: 75 with unit operating; for non-operation) ertifications Dimensions abled Models Quick Disconnect Models ø 4. mm (.57") Jam ut (upplied) M3 x.5 Thread ø 5 mm (.59") 45. mm (.77") 5.5 mm (2.3") reen LD Power ndicator mber LD Output ndicator.5 mm (.45") 66.5 mm (2.62") Tel: P/ 2523 Rev.
5 T3 ensors -Voltage eries Performance urves Table : Opposed Mode ensors Beam Pattern xcess ain 75 mm 5 mm 25 mm 25 mm 5 mm 75 mm T3 eries Opposed Mode 5 m (5') 3 m (') 45 m (5') DT 6 m (2') 75 m (25') 3" 2" " " 2" 3". m (.33') m (3.3') DT T3 eries Opposed Mode m (33') m (33') Table 2: Polarized Retro Mode ensors 2 Beam Pattern xcess ain 5 mm mm 5 mm 5 mm mm 5 mm T3 eries Polarized Retro with BRT-3 Reflector.5 m (5') 3. m (') 4.5 m (5') DT 6. m (2') 7.5 m (25') 6" 4" 2" 2" 4" 6". m (.33'). m (.33') T3 eries with BRT-3 Reflector DT Polarized Retro m (3.3') m (33') 2 Performance based on use of a model BRT-3 retroreflector (3-inch diameter). ctual sensing range may be more or less than specified, depending on the efficiency and reflective area of the retroreflector used. P/ 2523 Rev. - Tel:
6 T3 ensors -Voltage eries Table 3: Fixed-Field Mode ensor xcess ain 3 Fixed-Field 2 mm Fixed-Field 4 mm Fixed-Field 6 mm mm (.4") mm (.4") T3 eries Fixed-field mode with 2 mm far limit cutoff DT mm (4") mm (4") mm (.4") mm (.4") T3 eries Fixed-field mode with 4 mm far limit cutoff DT mm (4") mm (4") mm (.4") mm (.4") T3 eries Fixed-field mode with 6 mm far limit cutoff DT mm (4") mm (4") Ø 6 mm spot size at 35 mm focus Ø 2 mm spot size at 2 mm cutoff Using 8% gray test card: cutoff distance will be 95% of value shown. Using 6% black test card: cutoff distance will be 9% of value shown. Ø 7 mm spot size at 35 mm focus Ø 25 mm spot size at 4 mm cutoff Using 8% gray test card: cutoff distance will be 9% of value shown. Using 6% black test card: cutoff distance will be 85% of value shown. Ø 7 mm spot size at 35 mm focus Ø 3 mm spot size at 6 mm cutoff Using 8% gray test card: cutoff distance will be 85% of value shown. Using 6% black test card: cutoff distance will be 75% of value shown. ccessories ordsets ll measurements are listed in millimeters [inches], unless noted otherwise. 4-Pin Micro-tyle ordsets Model Length tyle Dimensions Pinout (Female) MQ-46 MQ m (6 ft) 4.57 m (5 ft) 42 Typ. traight MQ m (3 ft) /2-2 UF-28 ø MQ-46R MQ-45R MQ-43R.83 m (6 ft) 4.57 m (5 ft) 9.4 m (3 ft) Right-ngle /2-2 UF-28 ø Typ 28 Typ 2 = Red/Black 2 = Red/White 3 = Red 4 = reen 3 Performance based on use of a 9% reflectance white test card. Focus and spot sizes are typical Tel: P/ 2523 Rev.
7 T3 ensors -Voltage eries Banner ngineering orp. Limited Warranty Banner ngineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner ngineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. TH LMTD WRRTY LUV D LU OF LL OTHR WRRT WHTHR PR OR MPLD (LUD, WTHOUT LMTTO, Y WRRTY OF MRHTBLTY OR FT FOR PRTULR PURPO), D WHTHR R UDR OUR OF PRFORM, OUR OF DL OR TRD U. This Warranty is exclusive and limited to repair or, at the discretion of Banner ngineering orp., replacement. O VT HLL BR R ORP. B LBL TO BUYR OR Y OTHR PRO OR TTY FOR Y TR OT, P,, OF PROFT, OR Y DTL, OQUTL OR PL DM RULT FROM Y PRODUT DFT OR FROM TH U OR BLTY TO U TH PRODUT, WHTHR R OTRT OR WRRTY, TTUT, TORT, TRT LBLTY, L, OR OTHRW. Banner ngineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner ngineering orp. ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by Banner ngineering orp will void the product warranties. ll specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. pecifications and product information in nglish supersede that which is provided in any other language. For the most recent version of any documentation, refer to: For patent information, see Banner ngineering orp. ll rights reserved
T30 Sensors - AC-Voltage Series
T3 ensors - -Voltage eries elf-ontained, -Operated ensors Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments T style plastic
More information20 m (65.6 ft) Infrared, 950 nm. Q25RW3LP 2 m (6.6 ft) Visible red, 680 nm. Q25RW3FF mm (3.9 in) cutoff
Q25 ensors nstruction Manual elf-ontained, -Operated ensors Featuring Z-BM technology for reliable sensing without the need for adjustments Rectangular 25 mm plastic housing with 8 mm threaded mounting
More informationS30 Sensors DC-Voltage Series
3 ensors D-Voltage eries nstruction Manual elf-ontained, D-Operated ensors Featuring Z-BM technology for reliable sensing without the need for adjustments 3 mm plastic threaded barrel sensor in opposed,
More informationS18 Sensors ac-voltage Series
8 ensors ac-voltage eries elf-contained ac-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments ompletely epoxy-encapsulated to provide superior durability;
More informationS18 Series Sensors (DC Voltage)
8 eries ensors (D Voltage) Datasheet Featuring Z-BM technology for reliable sensing without the need for adjustments ompletely epoxy-encapsulated to provide superior durability, designed to meet rigorous
More information20 m (65.6 ft) Infrared, 950 nm
Q25 D ensors nstruction Manual elf-ontained, D-Operated ensors Featuring Z-BM technology for reliable sensing without the need for adjustments Rectangular 25 mm plastic housing with 8 mm threaded mounting
More informationT30 Sensors - DC-Voltage Series
T3 ensors - D-Voltage eries elf-ontained, D-Operated ensors Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments T style plastic
More informationT30 Sensors dc-voltage Series
T3 ensors dc-voltage eries elf-contained dc-operated sensors Models Features Featuring Z-BM technology, the specially designed optics and electronics provide reliable sensing without the need for adjustments
More informationS30 Sensors dc-voltage Series
elf-contained dc-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments 3 mm plastic threaded barrel sensor in opposed, retroreflective or fixed-field
More informationS18 Sensors dc-voltage Series
8 ensors dc-voltage eries elf-contained dc-operated sensors Features Featuring Z-BM technology for reliable sensing without the need for adjustments ompletely epoxy-encapsulated to provide superior durability,
More informationM12 Series Metal Barrel Sensors
eries Metal Barrel ensors Rugged, self-contained sensors in a 2 mm threaded barrel Features omplete family of sensors, all housed in a compact 2 mm threaded metal barrel Opposed, retroreflective, polarized
More informationWORLD-BEAM QS30 Series Sensor (DC Voltage)
WORLD-BM Q3 eries ensor (D Voltage) nstruction Manual ompact, self-contained photoelectric sensors in universal-style housing dvanced one-piece photoelectric sensors with exceptional long-range optical
More informationT18 Series Sensors (AC Voltage)
Sensors (AC Voltage) Instruction Manual Featuring Z-BAM technology for reliable sensing without the need for adjustments (most models) T style plastic housing with 8 mm threaded lens mount Models available
More informationWORLD-BEAM QS30 Universal Voltage
WORLD-BM Q3 Universal Voltage elf-contained photoelectric sensors in universal-style housing Features U dvanced one-piece photoelectric sensors with exceptional long-range optical performance ompact housing
More informationT30 DC-Operated Long-Range with Superior Durability
PHOTOLTR FTURD RTGL RGHT GL BRRL D-Operated Long-Range with uperior Durability poxy-encapsulated sensors provide reliable sensing without adjustments. Features 3 mm plastic threaded barrel vailable in
More informationø 40 mm Opposed, Polarized Retroreflective and Fixed-field Models Suffix E, R, LP and FF Models NPN
OR MTUR OMPT MDZ FULLZ T Right-ngle Barrel-Mount ensors Features Z-BM technology, with specially designed optics and electronics for reliable sensing without adjustments Features T-style plastic housing
More informationø 18.0 mm Models LO S183EQ1 Emitter
8 ensors ø 8. mm OL UTOD, TP, G & PDF Photoelectrics ensors ensors pecial Purpose ensors Measurement & nspection ensors Vision Wireless 85. mm Opposed, on-polarized Retroreflective and ls uffix, R, L and
More informationDISTANCE Q85BB62R DISTANCE
Q8 ensors ompact Photoelectric ensors with Universal Voltage and Wiring hamber Features conomical photoelectric sensors in NM-6P ( P67) B housing ignal (D ystem) and Output indicator LDs Wiring chamber
More informationQ85 Sensors. Output Timing. Q853E Effective Beam: 9.6 mm Q85VR3R. SPDT E/m Relay E X C E S S. Yes G A I N. Yes. Yes
Q8 ensors ompact Photoelectric ensors with Universal Voltage and Wiring hamber Features conomical photoelectric sensors in NM-6P ( P67) B housing ignal (D ystem) and Output indicator LDs Wiring chamber
More informationQ60AFV Series Sensors with Visible Red Emitter
Datasheet Self-Contained Adjustable-Field Sensors Adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects located beyond the sensing field
More informationWORLD-BEAM QS18 Adjustable-Field Sensors
DJUTBL-FLD (some models) WORLD-BM Q8 djustable- ensors Miniature sensors with visible red LD or visible red laser Models Features xceptional optical performance, comparable to larger sensors imple multi-turn
More informationWORLD-BEAM QS18AFF200 Sensors with Foreground Suppression
WORLD-BEAM QS8AFF00 Sensors with Foreground Suppression Datasheet Compact sensors featuring extended range and foreground suppression mode Exceptional optical performance; up to 00 mm sensing range in
More informationPNP. 5 to 800 mm sensor to reflector distance on BRT-60x40C NPN
Datasheet Coaxial polarized retroreflective sensor for clear object detection Reliable detection of clear, translucent, or opaque objects including PET and glass containers, transparent films, and mirror-like
More informationLX Series Part-Sensing Light Screen
Datasheet For Sensing Small or Flat Parts at High Speeds Emitter and receiver pair produce a strobed web of modulated light beams, in 8 lengths, 2 sensing ranges Simple, economical and highly reliable
More informationWORLD-BEAM QS18AF Sensor with Background Suppression
WORLD-BEAM QS8AF Sensor with Background Suppression Datasheet Compact sensors featuring extended range and background suppression mode Exceptional optical performance; up to 00 mm sensing range in compact
More informationWORLD-BEAM QS18 Mechanically Adjustable Background Suppression Sensors
WORLD-BM Q8 Mechanically djustable Background uppression ensors Datasheet Miniature sensors with visible red LD or visible red laser xceptional optical performance, comparable to larger sensors imple multi-turn
More informationWORLD-BEAM QS30 Adjustable-Field Sensors
with Background Suppression Midsize sensors featuring extended range and background suppression mode Features Bipolar discrete outputs, PNP and NPN 128 element photo receiver for superior performance on
More informationMINI-BEAM Clear Plastic Detection Sensors
Datasheet AC-operated or DC-operated Sensors for Clear Plastic Detection Senses the presence of clear plastic materials while ignoring all other materials A highly reliable, cost-saving alternative to
More informationSL Series Slot Sensor
Self-contained opposed-mode sensor pair Features An easy-to-use self-contained opposed-mode sensor pair in a rugged U-shaped housing Easy and economical to mount Molded-in beam guides simplify mounting
More informationM18-3 Nickel-Plated Brass 18 mm Barrel Sensors
M8- Nickel-Plated Brass 8 mm Barrel Sensors Datasheet Next generation of self-contained dc-operated sensors Complete family of sensors, all housed in the popular 8 mm threaded metal barrel Economical photoelectric
More informationPicoDot. Supply Voltage. Output Type NPN V dc PNP
PicoDot Polarized Retroreflective Laser ensors PicoDot Features Compact and lightweight. Class 2 laser diode light source. Brings high power and small effective beam to retroreflective sensing applications.
More informationQL50 Luminescence Sensor
Compact, self-contained luminescence sensor LISTED US Compact, self-contained design Features Senses luminescent marks, even on luminescent backgrounds and on reflective surfaces, such as ceramic, metal,
More informationSLE30 Expert Series Slot Sensor
Datasheet Self-Contained Opposed-Mode Sensor Pair with each Mode An easy-to-use, self-contained opposed-mode sensor pair in a rugged U-shaped housing Easy push-button programming automatically adjusts
More informationWORLD-BEAM QS30AF Sensor
WORLD-BEAM QS30AF Sensor Push-Button-SE Adjustable-Field Sensor Features Push-button adjustable-field background suppression sensor detects objects within a defined sensing field, while ignoring objects
More informationR-GAGE QT50R Retroreflective* Sensor
R-GAGE QT5R Retroreflective* Sensor Radar-Based Retroreflective Sensors for Detection of Moving and Stationary Targets Features FMCW (true-presence) radar detects moving and stationary objects Retro-wave
More informationLED Series Sealed High-Intensity Area Lights
Datasheet High-Power Lighting for use with Banner Vision Systems To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring,
More informationMULTI-BEAM LS10 Light Screen System
For Sensing Small Parts at High Speeds Emitter and receiver pair produce a strobed array of modulated light beams to produce a light screen Simple, economical and highly reliable means of sensing small
More informationQ45BB6LL Laser Diode Retroreflective Sensors
Q456LL Laser Diode Retroreflective Sensors Datasheet Very-Long-Range Retroreflective Sensors for 10 V to 30 V dc High power and small effective beam for retroreflective sensing applications lass II laser
More informationWORLD-BEAM QS30 Series
WORLD-BEAM QS30 Series High-power opposed-mode sensors Features Infrared beam with high excess gain range over 213 m (700') Excellent noise immunity and crosstalk avoidance Excellent optical performance
More informationU-GAGE Q45U Long-Range Ultrasonic Sensors
U-GAGE Q45U Long-Range Ultrasonic Sensors Piezoelectric Proximity Mode Sensors with Push Button Programming of Sensing Window Limits Bipolar Discrete Outputs Features Analog models also available Models
More informationQL55 Series Luminescence Sensor
Self-contained, microprocessor-based luminescence sensor Features Self-contained design in a robust, compact metal housing High sensitivity Microprocessor-controlled Senses luminescent marks, even on luminescent
More informationPICO-AMP Miniature Remote Sensing System
PICO-AMP Miniature Remote Sensing System MD14 Modulated Amplifer and Ultra-small Remote Sensors PICO-AMP Features Ultra-small remote sensors to fit the tightest locations Three fixed frequency selections
More informationSmall Object Counter page 227 page 228 page 228 page 258
OR FBR OR PLT FBR L FBR D eries Redefining High-Performance ensing Features advanced fiber optic amplifier for use with plastic fibers vailable in bipolar, discrete and analog/discrete output models vailable
More informationMULTI-BEAM Sensors. Compact modular self-contained photoelectric sensing controls
MULT-BM ensors ompact modular self-contained photoelectric sensing controls.6" (4 mm) tatus ndicator LD (except emitters) ccess to ensitivity djustment." (5 mm) Lens enterline 4.5" (4 mm).6" (6. mm).7"
More informationD10 Expert with Discrete Output and Bargraph Display
D xpert with Discrete Output and Bargraph Display dvanced sens f use with plastic fiber optics tandard Model tack of Models with Bussable Power Feature Features asy-to-read -segment light bar indicat f
More informationU-GAGE T30UX Series with Discrete Output
U-GAGE T3UX Series with Discrete Output Ultrasonic Sensor with TEACH-Mode Configuration 1, 2 and 3 m (3.28, 6.56, and 9.84 ft) versions with short dead zones (1% of max range) Built-in temperature compensation
More informationSureCross Wireless Q45 Sensor - Glass Fiber
urecross Wireless Q45 ensor - Glass Fiber urecross Wireless Q45 ensors combine the best of Banner s flexible Q45 sensor family with its reliable, field-proven, urecross wireless architecture to solve new
More informationWLS28-2 LED Strip Light - PWM Dimmable
WLS8- LED Strip Light - PWM Dimmable Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose
More informationQ4X Stainless Steel Laser Sensor
Quick Start Guide Class 1 laser CMOS sensor with a bipolar (1 PNP and 1 NPN) output. Patent pending. This guide is designed to help you set up and install the Q4X Sensor. For complete information on programming,
More informationSLE30 Expert Series Teach-Mode Slot Sensor
SLE30 Expert Series Teach-Mode Slot Sensor Self-contained opposed-mode sensor pair with Teach Mode SLE30 Expert Series Slot Sensor Features An easy-to-use, self-contained opposed-mode sensor pair in a
More informationR-GAGE QT50RAF Sensor
Radar-Based Adjustable Field Sensors for Detection of Moving and Stationary Targets Features FMCW (true-presence) radar detects moving and stationary objects Adjustable sensing field ignores objects beyond
More informationR-GAGE QT50RAF Sensor
Datasheet Radar-Based Adjustable Field Sensors for Detection of Moving and Stationary Targets FMCW (true-presence) radar detects moving and stationary objects Adjustable sensing field ignores objects beyond
More informationDF-G1 Expert Dual Display Fiber Amplifier
Installation Guide Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies. For complete technical information about this product, including dimensions, accessories,
More informationWORLD-BEAM QS30H2O Series
High-Power Water Sensor For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com Features Models QS30EXHO QS30ARHO QS30RRHO
More informationR-GAGE QT50R-RH Sensor
Datasheet Radar-Based Retroreflective Sensors for Detection of Moving and Stationary Targets FMCW (true-presence) radar detects moving and stationary objects Retro-wave sensor - use of a reference signal
More informationNew industry standard sensor
48 Low cost/mall type series New industry standard sensor Longest sensing distance in class at 2 m * ignificantly reduced dead zone Indicators visible from any angle *Red LD type, with through-beam type
More informationWLS28-2 UV LED Strip Light
WLS8- UV LED Strip Light Datasheet Banner's WLS8- UV LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them a cost-effective operator inspection
More informationWORLD BEAM QS30H2O Series
WORLD BEAM QS0HO Series High-Power Water Sensor Features Special emitter/receiver infrared wavelength tuned to the absorption band of water Powerful enough to burn through many types of plastic and glass
More informationR-GAGE QT50R-AFH Sensor
Radar-Based Sensors for Detection of Moving and Stationary Targets Features Fourth generation FMCW (true-presence) radar detects moving and stationary objects Higher sensitivity and longer range Adjustable
More informationM12 Class 1 Laser Emitter
IEC Class 1 Laser for use with Banner modulated receivers CAUTION... Never stare directly into the emitter lens. Laser light can damage your eyes. Avoid placing any mirror-like object in the beam. Never
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationR55F Series Fiber-Optic Color Mark Sensors
For Plastic and Glass Fiber Optics R55F Series Sensor Features Outstanding color contrast sensitivity; detects 16 levels of gray scale. Depending on beam color, reliably detects the toughest color mark
More informationMULTI-BEAM Sensors. Compact modular self-contained photoelectric sensing controls
MULT-BAM ensors ompact modular self-contained photoelectric sensing controls.6" (4 mm) tatus ndicator LD (except emitters) Access to ensitivity Adjustment 2." (53 mm) Lens enterline 4.5" (4 mm) 2.36" (6.
More informationSpecifications. Environmental. Operating Temperature [C (F)] for TRIAC output ( ) for all others
Specifications Environmental Line Line Green Line Analog ertifications UL Listed, SA Approved, and E Marked for all applicable directives Features S Wide selection for increased application flexibility
More informationUS18-PL-5-N03 Ultrasonic Sensors
US18-PL-5-N03 Ultrasonic Sensors Miniature Ultrasonic Sensors with EACH-Mode Programming Fast, easy-to-use EACH-Mode programming; no potentiometer adjustments Ultra-compact housing One discrete output:
More informationL-GAGE LT3BD Long-Range Time-of-Flight Laser Sensor
L-GAGE L3BD Long-Range ime-of-flight Laser Sensor Datasheet Extremely long range: 5 m with white targets or 3 m with gray targets for diffuse mode sensors, up to 50 m for retroreflective models wo discrete
More informationCompact Photoelectric Sensor
CX-00 Photoelectric s Compact Photoelectric The CX-00 series of photoelectric sensors is a wide-ranging lineup of 116 different models. Whatever your application entails, SUNX has covered it with this
More informationR55 Color Mark Sensor
SWITCH POINT R55 Color Mark Sensor Color Registration Mark Sensor with Solid-State White Light Source R55 Features Outstanding color contrast sensitivity; detects 16 gray scale changes Reliably detects
More informationWLS28-2 Dual Color LED Strip Light
WLS8- Dual Color LED Strip Light Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED
More informationWORLD-BEAM QS18E Series
Datasheet Easy-to-use Expert-style Static and Dynamic EACH options, plus Window, Light, and Dark SE, via push button or remote input Smart power-control algorithm to maximize performance in low-contrast
More informationFEATURES. 15 m ft. 4 m ft. 2 m ft. 100 mm in. 600 mm in. 15 m ft. 4 m ft. 2 m ft. 100 mm 3.
273 Cylindrical Photoelectric Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO PHOTO MEASURE -LS200
More informationWORLD-BEAM QS18E Series
Datasheet Easy-to-use Expert-style Static and Dynamic EACH options, plus Window, Light, and Dark SE, via push button or remote input Smart power-control algorithm to maximize performance in low-contrast
More informationSure Cross Wireless Q45D Sensor Node (Diffuse)
Sure Cross Wireless Q45D Sensor Node (Diffuse) Datasheet Sure Cross Wireless Q45 Sensors combine the best of Banner s flexible Q45 sensor family with its reliable, field-proven, Sure Cross wireless architecture
More informationU-GAGE QT50ULB Series Sensors with Analog Output
U-GAGE Q50ULB Series Sensors with Analog Output Datasheet Long-range ultrasonic sensors with EACH-mode programming Fast, easy-to-use EACH-Mode programming; no potentiometer adjustments Scalable output
More informationMICRO-AMP System. MA3 and MA3P Modulated Amplifiers. Model MA3P: PNP (current sourcing) output. Hookup Diagram, MA3 Amplifier
MCRO-AMP ystem MA3 and MA3P Modulated Amplifiers Banner MCRO-AMP modules MA3 and MA3P are modulated amplifiers designed for use with the miniature P00 eries remote sensors. Miniature photoelectric sensors,
More informationR58E Series Expert Registration Mark Sensors
Datasheet Registration Mark Sensor with hree-color Light Source Features Ultra-fast 10 khz switching frequency Sensor automatically selects red, green, or blue LED during EACH to optimize application contrast
More informationR58E. Register Mark Sensors. the R58 BR 2
Register Mark Sensors Provides excellent color contrast sensitivity detecting 16 levels of gray scale Optimizes application contrast by automatically chooseing red, green or blue sensing LEDs R58E http://www.e-sensors.com.tw
More informationMICRO-AMP System. Product Line Specifications. Remote sensors, modulated amplifiers, and logic modules
MRO-AMP ystem Remote sensors, modulated amplifiers, and logic modules Product ine pecifications A versatile system of compact, high-performance remote sensors modulated amplifiers, and logic modules Remote
More information1. Diffuse sensor, intensity difference 2. Diffuse sensor with background suppression 3. Retro-reflective sensor with polarization filter 4.
Table of contents 1. Diffuse sensor, intensity difference 2. Diffuse sensor with background suppression 3. Retro-reflective sensor with polarization filter 4. Through beam sensor 5. Fiber Optic Sensor
More informationUltramini clever reliability in confined quarters. Simple installation and operation
Series OU Ultramini clever reliability in confined quarters m Through-beam sensors OUS/OUE up to, m Retro-reflective sensors OUR up to, m Retro-reflective sensors with polarizing filters OUP and OUC up
More informationCylindrical Photoelectric Sensor
SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This
More informationSensing method Appearance Sensing distance Operation mode Model Convergent-reflective (narrow vision field) 30 to 100 mm (variable)
Photoelectric Sensor with Built-in Amplifier CSM DS_E_11_1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Note: -2/-/-DS10/-DS30/-R2
More informationSensing method Appearance Sensing distance Operation mode Model. Emitter E3S-2LE4 Through-beam *1. 2 m. 0.1 to 2 m. 300 mm. 2 m
Photoelectric Sensor with Built-in Amplifier CSM DS_E 1 General-purpose Photoelectric Sensor for High Quality and Reliable Detection Be sure to read Safety Precautions on page 8. Ordering Information General-purpose
More informationL-GAGE LT3 SENSORS. LT3 Sensing Ranges QPMA LIGHT GAUGING ULTRASONIC MEASURING ARRAYS RADAR. More information online at bannerengineering.
SENSORS LIGHT GAUGING ULTRASONIC MEASURING ARRAYS RADAR L-GAGE LT Distance-Gauging Uses advanced time-of-flight technology for precise, long-distance gauging at the speed of light Available in diffuse-mode
More informationEasy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant
EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient
More informationEX-40 SERIES. Convergent Reflective Photoelectric Sensor. Reliable object detection in limited area. Stable convergent distance sensing
313 PHOTO PHOTO Convergent Reflective Photoelectric EX-4 SERIES Related Information General terms and conditions... F-3 Glossary of terms / General precautions...p.1549~ / P.1552~ guide... P.231~ Korea
More informationPSW-002. Fiber Optic Polarization Switch. User Guide
PSW-002 Fiber Optic Polarization Switch User Guide Version: 1.0 Date: May 30, 2014 General Photonics, Incorporated is located in Chino California. For more information visit the company's website at: www.generalphotonics.com
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
337 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1549~ guide... P.231~ General precautions... P.1552~ PHOTO
More informationin one housing (3). The light beam is reflected by a reflector (4). The objects are detected by interruption of the light beam.
This info card serves as a supplement to the main position sensors catalogue and to the individual data sheets. For further information and contact addresses please visit our homepage at www.ifm. com.
More informationSensing method Through-beam Retroreflective Diffuse reflective Convergent-beam Appearance Side-view Flat Side-view Flat Side-view
R Subminiature Photoelectric Sensor Omron s Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron s Hyper LED technology to achieve the industry s smallest visible red beam H Self-contained
More informationPower Requirements. Features
Datasheet Positional accuracy (CEP50) autonomous positional error less than 2.5 meters SiRF Star IV GPS chip Satellite-based augmentation systems: WAAS, EGNOS, MSAS, GAGAN High sensitivity navigation engine
More informationInstallation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors All Sensors Retroreflective Polarized Retroreflective ClearSight TM Standard Diffuse Long Range Diffuse Extended
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
371 Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.1455~ selection guide... P.271~ General precautions... P.1458~
More information9.2. Fiber Optic Cables.
Fiber Optic Cables.2 Contents Description Product Overview....................... Product Selection....................... Accessories........................... Technical Data and Specifications..........
More informationCYLINDRICAL TYPE PHOTOELECTRIC SENSORS. Easy to Replace. The sensor with a connector (UZC---A) makes its replacement easy. Environment Resistant
CYINDRICA TYPE PHOTOEECTRIC SENSORS UZC Series SIMPE MOUNTING WITH A M8 THREAD M8 Thread This sensor has a M8 thread on an enclosure, which is convenient for mounting. Easy to Replace The sensor with a
More informationInstallation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors
Installation Instructions PHOTOSWITCH Series 9000 On/Off and Timing Photoelectric Sensors Polarized Transmitted Beam Fiber Optic All Sensors Retroreflective Retroreflective ClearSight TM Standard Diffuse
More informationOperating instructions Diffuse reflection sensor with background suppression. OJ51xx laser / / 2010
Operating instructions Diffuse reflection sensor with background suppression OJ51xx laser 704811 / 00 05 / 2010 Contents 1 Preliminary note3 1.1 Symbols used 3 2 Safety instructions 3 3 Functions and features
More informationCALIBRATED IMPULSE GENERATOR MODEL CIG khz 1 GHz
INSTRUCTION MANUAL CALIBRATED IMPULSE GENERATOR MODEL CIG-25 10 khz 1 GHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PROPRIETARY. UNAUTHORIZED REPRODUCTION IS FORBIDDEN.
More informationAnalog Laser Sensor. Installation Instructions. Specifications. Summary of Changes. Description. Catalog Numbers 45BPD-8LTB1-D5, 45BPD-8LTB2-D5
Installation Instructions Original Instructions Analog Laser Sensor Catalog Numbers 45BPD-8LTB1-D5, 45BPD-8LTB2-D5 Topic IMPORTANT Summary of Changes This manual contains an update to the sensing beam
More informationTriple Beam Adjustable Range Reflective Photoelectric Sensor Amplifier Built-in
377 PHOTO PHOTO USE MEASUREMENT STATIC CONTROL Triple Beam Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-17 Glossary of terms... P.1359~ selection
More information