3M Scotchkote System Application Guide. High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding

Size: px
Start display at page:

Download "3M Scotchkote System Application Guide. High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding"

Transcription

1 High Performance Corrosion Resistant System for Plastisol Coated Metal Cladding - Issue 1 Surface Preparation & Cleaning Application of Patch Primer to Corroded Areas Application of Primer to Patch Primed & Exposed Metal Areas Finish Coat(s) As required 3M Scotchkote Epoxy Primer MC 50µ Theoretical coverage rate at 50µ is 10m²/litre 3M Scotchkote Epoxy Primer MC 50µ Theoretical coverage rate at 50µ is 10m²/litre 3M Scotchkote Encapsulation Coating Polynox 350µ Theoretical coverage rate at 350µ is 2m²/litre If applied in accordance with this Application Guide, has an expected service life of 10 years. 1

2 Surface Preparation & Cleaning Heavy deposits of dirt, silt and other contamination should be removed from the surface. All surfaces should be high-pressure detergent washed to remove all dirt, debris, oil, diesel and other contamination. The adhesion of the existing paint system to the substrate should be checked using the V Cut Procedure - Using a sharp knife the coating should be cut through to the substrate making two cuts in the shape of the letter V. The knife should then be inserted at the point of the V and flicked upwards to test the adhesion. If no coating is removed, or the coating splits cohesively, leaving a layer of coating on the surface, then the adhesion of the system can be considered suitable for overcoating. Any areas of loosely adhering coating or loose flaking paint must be scraped away to provide a firm sound surface. Surfaces of the existing coating should then be thoroughly abraded, with edges feathered in, then wiped/ rinsed to remove all dust and abrasive residue. All corroded areas should be thoroughly prepared by wire brushing and/or angle grinding to achieve ISO St3. All prepared corroded areas should then be patch primed with 3M Scotchkote Epoxy Primer MC 135 as described later in this guide. Any white zinc salts should be removed by light abrasion or scouring with 3M Scotchbrite abrasive pads. The use of a proprietary Mordant Solution/T Wash is recommended on Zinc surfaces. When used as directed by the manufacturer s instructions, this will provide a useful indicator of surface cleanliness as well as etching the surface. When used correctly the surface should turn blue/black. If this doesn t occur then the surface should be cleaned again and the Mordant Solution reapplied. 2

3 Patch Priming Corroded Areas With 3M Scotchkote Epoxy Primer MC 135 Surfaces to be coated should be dry and free from contamination. Scotchkote Epoxy Primer MC 135 is a two component high performance epoxy coating, supplied as a Part A (Base) component and a Part B (Activator) component. The Part A (Base) component should be thoroughly stirred until a uniform colour is produced. The Part B (Activator) component should then be added and thoroughly stirred for at least two minutes, to produce a homogeneous mixture. NOTE: If only part quantities of the Part A (Base) and Part B (Activator) are to be used, care must be taken to maintain the volume mixing ratio of 3:1 respectively, as well as total compliance with the above mixing procedures. Scotchkote Epoxy Primer MC 135 should not be applied when the temperature of the substrate is less than 7 C and/or when the surface to be coated is less than 3 C above the dew point. Scotchkote Epoxy Primer MC 135 should be applied by brush, ensuring the product is worked well into pitted areas, at a wet film thickness of 100 microns, which equates to a dry film thickness of 50 microns on a smooth surface. Theoretical coverage at 50 microns is 10m²/litre. These patch primed areas can be overcoated with the subsequent primer coat after they have achieved a touch dry state, typically a minimum of 4 hours at 20ºC and provided surfaces are clean, the maximum overcoating time is three months. 3

4 Application of 3M Scotchkote Epoxy Primer MC 135 to Patch Primed Corroded Areas & Exposed Metal Surfaces Areas that have been previously treated with Scotchkote Epoxy Primer MC 135 should be allowed to become at least touch dry before applying the subsequent coat. Non-ferrous metal surfaces need only thorough cleaning and degreasing, no mechanical preparation is normally required. Scotchkote Epoxy Primer MC 135 should be applied by brush, roller or spray, at a wet film thickness of 100 microns, which equates to a dry film thickness of 50 microns, to produce a smooth uniform film. Theoretical coverage at 50 microns is 10m²/litre. Scotchkote Epoxy Primer MC 135 can be overcoated after a minimum of 16 hours at 20 C and provided surfaces are clean, the maximum overcoating time is three months. The following times are given as a guide for minimum overcoating at different temperatures. TEMPERATURE MINIMUM 10 C 32 hours 15 C 24 hours 20 C 16 hours 25 C 12 hours 30 C 8 hours 4

5 Application of 3M Scotchkote Encapsulation Coating Polynox 136 Scotchkote Encapsulation Coating Polynox 136 should not be applied when air and surface temperatures are below 7 C, when rain is falling or when rain is imminent nor when relative humidity exceeds 85% or when the surfaces to be coated are less than 3ºC above the dew point. Prepared surfaces should be clean and dry. Scotchkote Encapsulation Coating Polynox 136 is a single component water based anti-corrosive coating supplied ready for use, only requiring stirring to incorporate any slight separation prior to use and is ideally suited for application by airless spray or air assisted spray. For both methods of spray application a minimum of 32:1 pump ratio should be used ensuring that a spray pressure at the tip of psi is achieved. Spray tips in the range of thou should be used. During application all crevices should be completely penetrated and coated, particularly edges and angles of sectional steel. During application, regular checks should be carried out using wet coating thickness gauges. Scotchkote Encapsulation Coating Polynox 136 should be applied as evenly as possible at a nominal 600 microns wet to produce a minimum dft of 350 microns. Excessive wet film thicknesses should be avoided. The theoretical coverage at 350µ is 2m²/litre. Scotchkote Encapsulation Coating Polynox 136 can also be applied by brush but will require multiple coats to achieve the required minimum dry film thickness. An appropriate drying interval must be left between the coats, dependant upon prevailing temperature and humidity levels. After application the surface should be inspected and any visible areas of uncoated substrate must be coated to the correct film thickness. To maintain the specified thickness at edges and around other sharp protuberances, a stripe coat should be applied to these areas prior to carrying out the overall application. The stripe coat can be applied by brush or spray. In open conditions with good air movement Scotchkote Encapsulation Coating Polynox 136 is touch dry in approximately 60 minutes and hard dry in 24 hours at 20 C. In cold and humid conditions these drying times will be considerably extended. 5

6 Notes Document References 3M Scotchkote Epoxy Primer MC 135 3M Scotchkote Encapsulation Coating Polynox 136 Product Technical Data Sheet 3M and Scotchkote are trademarks of 3M Company. Important Notice: All statements, technical information and recommendations are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using the 3M Scotchkote Product, you must evaluate it and determine if it is suitable for your intended application. Because conditions of product use are outside of 3M control s and vary widely you assume all risks and liability associated with such use. Any product related statements not contained in current 3M publications, or any contrary statements contained in your purchase order, shall have no force or effect unless expressly agreed to in writing by an authorised officer of 3M. Warranty; Limited Remedy; Limited Liability 3M warrants that the 3M Scotchkote Product will conform to 3M published specifications upon shipment. If the product is proven not to have met the specifications your exclusive remedy within 12 months of sale by 3M of the product and 3M's sole obligation will be, at 3M's option, to replace the Product or to refund the purchase price of the Product. Except where prohibited by law, this warranty is made in lieu of all other warranties, express or implied, including, but not limited to, any implied warranty of suitability or fitness for a particular purpose, or those arising from a course of dealing, custom or usage or trade. 3M has no obligation under this warranty with respect to any product that has failed due to inadequate or improper storage, handling, surface preparation, application, or maintenance; failure to follow product instructions or recommendations or alteration or damage to the Product caused by accident, neglect, or misuse. OTHER THAN IN THE CASE OF DEATH OR PERSONAL INJURY CAUSED BY ITS NEGLIGENCE AND EXCEPT WHERE PROHIBITED BY LAW, IN NO EVENT SHALL 3M BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES (INCLUDING LOST PROFITS) ARISING FROM THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ASSERTED. Electrical Markets Division (EMD) 3M United Kingdom plc 23 Standard Way Industrial Estate Northallerton North Yorkshire DL6 2XA United Kingdom Phone: +44 (0) Electrical Markets Division (EMD) 3M United Kingdom plc 3M Centre Cain Road, Bracknell Berkshire RG12 8HT Phone: Fax: Please recycle. Printed in UK. 3M All rights reserved. - 03/13 6

3M Scotchkote System Application Guide. High Performance Coating System for Degraded Plastisol Cladding Surfaces.

3M Scotchkote System Application Guide. High Performance Coating System for Degraded Plastisol Cladding Surfaces. High Performance Coating System for Degraded Plastisol Cladding Surfaces. - Issue 2 Surface Preparation & Cleaning Primer Stage Finish Coat(s) As required 3M Scotchkote Epoxy Primer MC 135 @ 50µ Theoretical

More information

These Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.

These Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881. For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889

More information

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT

More information

SEA45 Water Borne Acrylic Gloss

SEA45 Water Borne Acrylic Gloss Water Borne Acrylic Gloss TECHNICAL DATA SHEET Product Description Components is a single pack, general purpose gloss finish. Applicable by brush or spray. Fast drying Water based, low VOC Excellent weather

More information

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seikoh Giken SFP-550 Polishing Machines

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seikoh Giken SFP-550 Polishing Machines of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seikoh Giken SFP-550 Polishing Machines Technical Application Bulletin October, 2005 General Information The 3M Lapping Films 863X and

More information

Technical Data February, 2016

Technical Data February, 2016 Technical Data February, 2016 Product Description 3M DP-600 is a non-sag, grey, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of

More information

WSS-M99P48-A3: 3 Foam Performance, PressureSensitive Adhesive Tape. Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications)

WSS-M99P48-A3: 3 Foam Performance, PressureSensitive Adhesive Tape. Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications) W-M99P48-A3: 3 W-M99P48-A3 Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications) Technical Bulletin November, 2016 3M tested the following adhesive tapes to the Automotive OEM

More information

Controltac Plus. Graphic Film RG Product Bulletin RG Description. Compatible Products. For Piezo Ink Jet Printing Only

Controltac Plus. Graphic Film RG Product Bulletin RG Description. Compatible Products. For Piezo Ink Jet Printing Only Controltac Plus Graphic Film RG162-10 Product Bulletin RG162-10 Release UKB, Effective Aug06 See Bulletin Change Summary on last page Description 3M Controltac Plus Graphic Film RG162-10 is a 4 -mil positionable

More information

APPLICATION NOTE - SR001. Cold Weather Application

APPLICATION NOTE - SR001. Cold Weather Application APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in

More information

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments. Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining

More information

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seiko Instruments SII, OFL-12 and OFL-15 Polishing Machines

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seiko Instruments SII, OFL-12 and OFL-15 Polishing Machines of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seiko Instruments SII, OFL-12 and OFL-15 Polishing Machines Technical Application Bulletin June, 2005 General Information The 3M Lapping

More information

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Domaille Engineering Polishing Machines

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Domaille Engineering Polishing Machines of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Domaille Engineering Polishing Machines Technical Application Bulletin June, 2005 General Information The 3M Lapping Films 863X and 863XW

More information

A-LF-Sea. Application Manual for M&R. (Full blasting)

A-LF-Sea. Application Manual for M&R. (Full blasting) Application Manual for M&R (Full blasting) April 2015 1 Contents 1.Standard scheme 1)Standard scheme for flat & vertical bottom 2)Colour scheme for system 2.High pressure fresh water washing (HPFWW) 1)Timing

More information

APPLICATION NOTE - SR001. Cold Weather Application

APPLICATION NOTE - SR001. Cold Weather Application APPLICATION NOTE - SR001 Cold Weather Application Silent Running is best applied with the ambient, material and substrate temperature in the range of 65-85 degrees F. Lower temperatures will result in

More information

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied

More information

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY). Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 765 1,2 765 vinyl ^(ValidationDate) 1 Product description This is a one component physically drying vinyl coating. It is fast drying. Can be used as primer

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 402;2522 1,2 2522 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high zinc dust

More information

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification. Technical Data Sheet 402;2521 1 2521 zinc silicate VValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product.

More information

Technical Data April Product Facestock Adhesive Liner. 3M Sheet Label.002 in. Bright Silver 350 Acrylic 90# Polyctd.

Technical Data April Product Facestock Adhesive Liner. 3M Sheet Label.002 in. Bright Silver 350 Acrylic 90# Polyctd. 3 Sheet Label Material 7903 7905 7908 7909T 7903FL 7908FL Technical Data April 2017 Product Description 3M Sheet Label Materials are durable, high performance materials that offer excellent thermal stability,

More information

APPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead Abatement

APPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead Abatement Sustainability Simplified. Very Simple. Award Winning Energy Saving and Asset Protection Coatings APPLICATION HANDBOOK for BUILDING COATINGS for Thermal Insulation, Mold Resistance, UV Resistance, Lead

More information

Product Information DP5000

Product Information DP5000 GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range

More information

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

More information

10P20-44MNF High Solids Epoxy Primer

10P20-44MNF High Solids Epoxy Primer Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.

More information

General description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.

More information

Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002

Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for

More information

WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504)

WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504) WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504) PRODUCT DESCRIPTION: INTENDED USES: Bicomponent gloss aliphatic acrylic polyurethane finishing paint, with excellent durability and extended repainting.

More information

PRODUCT GUIDE: CATALYZED TOPCOATS. Version:

PRODUCT GUIDE: CATALYZED TOPCOATS. Version: PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane

More information

OWENS FLOORING LLC MAINTENANCE AND WARRANTY

OWENS FLOORING LLC MAINTENANCE AND WARRANTY OWENS FLOORING LLC MAINTENANCE AND WARRANTY Wood Floor Care and Maintenance Your new wood floor is an important investment, and must be properly cared for and maintained in order for you to enjoy its full

More information

380 Swimming Pool Paint

380 Swimming Pool Paint Issued 21 st April 2010 PRODUCT DATA SHEET UNPAINTED CEMENT 380 Swimming Pool Paint SURFACE PREPARATION New cement or render should be allowed to cure for at least 21-28 days before any preparation is

More information

Duraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications

Duraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications PAGE 1 OF 5 Description & Uses Solver Duraguard Matt is an ultra premium quality, 100% acrylic, self priming exterior water-based coating, suitable for direct application to most surfaces including timber,

More information

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate). 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish

More information

Mix Ratio (by volume) 7630/3600 (Base) 0830/9000 (Acid Catalyst) Metal Primer 6840B meets the technical requirements of: Mil-P-7962 Mil-C-15328

Mix Ratio (by volume) 7630/3600 (Base) 0830/9000 (Acid Catalyst) Metal Primer 6840B meets the technical requirements of: Mil-P-7962 Mil-C-15328 TECHNICAL DATA SHEET Product Description 6840B is a two component chromated etch primer designed to give adhesion and corrosion protection to aluminium alloys as part of the 4080 series scheme. Alternative

More information

3M Abrasive Systems. Sanding made simple.

3M Abrasive Systems. Sanding made simple. 3M Abrasive Systems Sanding made simple. Introducing Sanding Made Simple. For more than 100 years, 3M Science has provided technologies designed to make your life easier and improve the world one finish

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 2521;402 1,2 2521 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 641;649 1,2 641 acrylic ^(ValidationDate) 1 Product description This is a one component physically drying acrylic coating. It has a semi gloss finish with

More information

Application Handbook for Homes/Buildings

Application Handbook for Homes/Buildings Application Handbook for Homes/Buildings FOR BUILDING ENVELOPE: Nansulate Energy Protect Nansulate HomeProtect Nansulate LDX Nansulate is Patented technology protected by U.S. and international Patents.

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy

More information

HP Chromate Free Epoxy Primer P /-4505/-4510

HP Chromate Free Epoxy Primer P /-4505/-4510 Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free

More information

3M Impact Protection Profile Installation System Instructions

3M Impact Protection Profile Installation System Instructions 3M Impact Protection Profile Installation System Instructions IMPORTANT: READ INSTRUCTIONS FOR USE BEFORE OPERATING Intended Use: The 3M Impact Protection Profile Installation System is for installing

More information

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification. Technical Data Sheet 14880 1 14880 acrylic VValidationDate). 1 Product description This is a one component solvent based acrylic thin film intumescent coating. Independently approved for fire protection

More information

AquaCLAD Water-Reducible Rust Preventative Alkyd

AquaCLAD Water-Reducible Rust Preventative Alkyd AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 429 1,2 429 acrylic ^(ValidationDate) 1 Product description This is a one component physically drying acrylic coating. It has a matt finish. It is a high

More information

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material. Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 7141;9820 1,2 7141 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically cured aliphatic polyester polyurethane coating.

More information

PBWWinc. GEN-U-LINE 4000 Series Application Guide. Technical Data Sheet. General Guidelines:

PBWWinc. GEN-U-LINE 4000 Series Application Guide. Technical Data Sheet. General Guidelines: PBWWinc. 1 GEN-U-LINE 4000 Series Application Guide Technical Data Sheet General Guidelines: 1) Close the facility to all traffic before starting any work on the game lines. Close all doors and windows

More information

3M Scotchlok Insulated Electrical Spring Connector B (Blue)

3M Scotchlok Insulated Electrical Spring Connector B (Blue) 3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor

More information

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification. Product description This is a two component chemically cured aliphatic polyester polyurethane coating. It has a high gloss finish with excellent gloss retention. It has excellent chemical resistance. To

More information

Painting Pitched Roofs

Painting Pitched Roofs 4 Tutorial 4 Painting Pitched Roofs Tile & Galvanized Iron Paint Academy Determining your product requirement: Measure area to which paint is to be applied. Depending on surface to which the product is

More information

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version:

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version: PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing

More information

CV116 Polyurethane Coat Gloss

CV116 Polyurethane Coat Gloss Polyurethane Coat Gloss TECHNICAL DATA SHEET Product Description Components is a two pack, ambient curing clear polyurethane gloss coating, designed for internal / external use to protect identification

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 7120;15600 1,2 7120 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating.

More information

3M Electrically Conductive Double-Sided Nonwoven Tape 9750

3M Electrically Conductive Double-Sided Nonwoven Tape 9750 Technical Data October 2013 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 Product Description 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 is an isotropically electrical conductive

More information

SILICONE RESIN PAINT FOR MASONRY FACADES

SILICONE RESIN PAINT FOR MASONRY FACADES TIKKURILA SILICONE RESIN PAINT FOR MASONRY FACADES DESCRIPTION Water-borne silicone emulsion paint. RECOMMENDED USES Residential, commercial, industrial and storage buildings and others. PRODUCT FEATURES

More information

Volume Solids % Weight Solids %

Volume Solids % Weight Solids % Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane

More information

3M Power Clamp Wiremount Connectors

3M Power Clamp Wiremount Connectors Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:

More information

Product Data Sheet November 2016

Product Data Sheet November 2016 Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer

More information

Aerodur 3001 Base Coat Special Effects

Aerodur 3001 Base Coat Special Effects Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001

More information

HAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH

HAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH TECHNICAL DATA SHEET Version 1 2016 June THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A corrosion resistant and decorative coating for ferrous and nonferrous metals, wood and certain

More information

Application Guide for Jotun Primax Diamond Powder Coatings

Application Guide for Jotun Primax Diamond Powder Coatings for Jotun Primax Diamond Application Guide for Jotun Primax Diamond Powder Coatings Date of Last Revision: August 2017 Page 1 of 7 Contents 1.0 Introduction 3 2.0 General overview 3 3.0 Safety Considerations..3

More information

Controltac Graphic Film

Controltac Graphic Film Controltac Graphic Film 162-10 and 162-114 Product Bulletin 162 Release L, December 2008 See Bulletin Change Summary on last page. For Screen Printing and Offset Printing Only Product Description Recommended

More information

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version:

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version: PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible

More information

The Path to a Perfect Finish

The Path to a Perfect Finish For more information contact your M representative, authorized distributor or visit MMarine.com Individual Product Instruction and Safety Information For individual product instructions and applicable

More information

The Path to a Perfect Finish. A guide to our most advanced line of gelcoat and paint refinishing products.

The Path to a Perfect Finish. A guide to our most advanced line of gelcoat and paint refinishing products. The Path to a Perfect Finish A guide to our most advanced line of gelcoat and paint refinishing products. 1 Visit 3MMarine.com/buffing for more detailed product selection help. Choosing the right product

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Approved 16480;18120 1,2 16480 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high

More information

Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive L1820 L1720 L1520 L1020 L1320 L1920, L1920S L1220 L1120

Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive L1820 L1720 L1520 L1020 L1320 L1920, L1920S L1220 L1120 Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive L1820 L1720 L1520 L1020 L1320 L1920, L1920S L1220 L1120 Technical Data January, 2015 Product Description 3M Cushion-Mount Plus Plate Mounting

More information

Signal Integrity Product Specification

Signal Integrity Product Specification PD--0077 Signal Integrity Product Specification 3M SFP+ Passive Direct Attach Copper Cable Assembly 3 Electronic Solutions Division Page: 1 of 9 Table of Contents 1.0 Scope... 4 2.0 Product Tested... 4

More information

Professional development programme

Professional development programme Professional development programme Roofing Call 0800 Resene, visit www.resene.co.nz New galvanised/zincalume (up to six months old) Wash thoroughly using Resene Roof Wash and Paint Cleaner then rinse thoroughly

More information

3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723

3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723 Technical Data November, 2009 M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 Product Description M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 is an isotropically

More information

INSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV

INSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV INSTALLATION & OPERATING INSTRUCTIONS for REDCO LETTUCE KING I and LETTUCE KING IV Lettuce King I Shown with optional Drum Ring Lettuce King IV TO BE SERVICED ONLY BY AUTHORIZED PERSONS P/N: 2802381 REV:

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide 574;576 1,2 574 epoxy ^(ValidationDate). 1 Product description This is a two component polyamine cured epoxy coating. It is a high solids, high build, glass flake

More information

Primer Surfacer EP II

Primer Surfacer EP II Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good

More information

PBWWinc. Technical Data Sheet. GERLINE Gameline Paint Instructions for Sport Flooring. General Guidelines:

PBWWinc. Technical Data Sheet. GERLINE Gameline Paint Instructions for Sport Flooring. General Guidelines: PBWWinc. 1 Technical Data Sheet GERLINE Gameline Paint Instructions for Sport Flooring General Guidelines: 1) Close the facility to all traffic before starting any work on the game lines. Close all doors

More information

HP Epoxy Primer P

HP Epoxy Primer P Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy

More information

Technical Data July, 2010

Technical Data July, 2010 3 Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive High Plateside Adhesion E1815H, E1820H E1715H, E1720H E1515H, E1520H E1015H, E1020H, E1040H, E1060H E1315H, E1320H E1915H, E1915HS, E1920H,

More information

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter.

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter. Knowledge Requirements Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator trainthepainter.com Knowledge Requirements The Knowledge Requirements the protective coatings

More information

CUPRON NEXT TECHNICAL DATA SHEET

CUPRON NEXT TECHNICAL DATA SHEET Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.

More information

Gloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours

Gloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours W-POXI DFA 301 PRODUCT DESCRIPTION: INTENDED USES: Bicomponent polyamine epoxy paint, of high thickness, being part of the class of Low VOC, being able to be applied in internal environments, closed or

More information

5543/9000 Flame Retardant UV Resistant Varnish High Gloss

5543/9000 Flame Retardant UV Resistant Varnish High Gloss Flame Retardant UV Resistant Varnish High Gloss TECHNICAL DATA SHEET Product Description is a two component, transparent, glossy acrylic urethane varnish. Designed to provide UV protection to external

More information

PRODUCT GUIDE: CATALYZED PRIMERS. Version:

PRODUCT GUIDE: CATALYZED PRIMERS. Version: PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and

More information

wall thinning) can be lower. Wall thinning is determined by part shape and depth of draw. Please contact your 3M representative for more information.

wall thinning) can be lower. Wall thinning is determined by part shape and depth of draw. Please contact your 3M representative for more information. 3M Custom Formed Reflectors increase the optical efficiency of a light fixture by using precise reflection optics to raise the lumen output. Each reflector is custom designed to your specifications for

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 620;621 1,2 620 epoxy ^(ValidationDate) 1 Product description This is a two component, polyamide cured, high molecular weight epoxy coating. Specially designed

More information

Technical Data June, 2008

Technical Data June, 2008 3 Cushion-Mount Plus Easy Mount Tapes with High Plateside Adhesion E1815H, E1820H E1715H, E1720H E1515H, E1520H E1015H, E1020H, E1040H, E1060H E1315H, E1320H E1915H, E1920H, E1920HS E1215H, E1220H, E1115H,

More information

March 2009 Product Information RAPID GREYMATIC 2K Filler

March 2009 Product Information RAPID GREYMATIC 2K Filler GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,

More information

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding

More information

mm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application

mm bar at the air inlet minutes at 20 C 5-10 minutes at 20 C. 8 hours at 20 C 45 minutes at 60 C 3 coat application Description Two-pack, VOC compliant, chromate-free epoxy primer-surfacer with good adhesion and corrosion resistance properties on all substrates within the Car Refinish market. For both new panels and

More information

Scotchcal Series 7725 SE

Scotchcal Series 7725 SE Scotchcal Series 7725 SE Special Effects Film Product Bulletin 7725 SE (UK) Release UK-J, Effective July 2004 Description Applications and Uses 3M Scotchcal Special Effects Film Series 7725 SE is intended

More information

3M Locator Plate

3M Locator Plate M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions

More information

Instruction Sheet REB SERIES. Rotating Sliding Base REB18

Instruction Sheet REB SERIES. Rotating Sliding Base REB18 Instruction Sheet REB SERIES Rotating Sliding Base REB14 REB18 THANK YOU Thank you for purchasing the REB Series Rotating Sliding Base. Please read these instructions thoroughly before installing this

More information

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification. Technical Data Sheet Application Guide Approved 356;2720;2700;1246 2 356 rosin based ^(ValidationDate). 4 Product description This is a one component antifouling coating based on ion exchange technology.

More information

Product Data Sheet August 2006 (Updated in December 2014)

Product Data Sheet August 2006 (Updated in December 2014) Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey

More information

3M Contrast Enhancement Film. The. Clear. Advantage. High purity, optical-grade adhesive films for joining transparent materials

3M Contrast Enhancement Film. The. Clear. Advantage. High purity, optical-grade adhesive films for joining transparent materials 3M Contrast Enhancement Film The Clear Advantage High purity, optical-grade adhesive films for joining transparent materials 3 3M Contrast Enhancement Film Engineered to speed assembly, improve display

More information

380 Swimming Pool Paint

380 Swimming Pool Paint Issued 21 st June 2011 PRODUCT DATA SHEET 380 Swimming Pool Paint SURFACE PREPARATION If your pool has been previously painted but you are unsure as to whether or not it was with chlorinated rubber or

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide 2580;26561 6 2580 ion exchange antifoulings ^(ValidationDate). 1 Product description This is a one component acrylic, hydrolysing antifouling coating based on ion

More information

Improve your productivity fast

Improve your productivity fast Improve your productivity fast Executive summary: Up until the recent downturn in the oil and gas industry the previous decade saw unprecedented levels of new construction projects across many industry

More information

SELECTION AND PREPARATION OF SUBSTRATES

SELECTION AND PREPARATION OF SUBSTRATES 592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates

More information

nax Urethane Primer Surfacer Zitan

nax Urethane Primer Surfacer Zitan Description Quick-drying two-pack wet on wet primer surfacer and sanding primer filler with excellent application and sanding properties. Helps to reduce process time due to its wide application window

More information

2K weather resistance clear coat A850

2K weather resistance clear coat A850 Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance

More information

nax Pro LV3601/03/05 VHS Primer Surfacer

nax Pro LV3601/03/05 VHS Primer Surfacer Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good

More information