10 Special Purpose Machine ML-111 CB-638 CB-640 CB-641 MP-200N LT-591

Transcription

1

2 1 1 1-needle, Lockstitch Machine 7 utton ewing Machine Machine for Heavy Materials 2 DDL-5530N DDL-5550N DDL-5550N-7 DDL-8700 DDL DDL-9000 DLN-5410N DLN-5410N-7 DLN-6390 DLN DLN-9010 DLU-5490N DLU-5490N-7 DLU-5494N-7/CP-560 DLD-5430N DLD-5430N-7 DLM-5200N DLM-5210N DLM-5400N-7 DMN-5420N-7 M-1800 M-1800/R10 M-373N ERIE M-377N ERIE LK-1903 LK-1903/R35 artacking Machine 8 hape-tacking Machine LK-1900 LK-1901 LK-1902 LK-1850 ERIE LK-1910 LK-1920 LK-1930 LK-1941Z LK-1942H LK-1942G Flat-bed ewing Machine 15 Zigzag titching Machine DDL-5600N DDL-5600N-7 DDL-8700L DU-140 DU-141NH DU-141H-7 DNU-1541 DNU-1541 DNU LU-1508N LU-1508NH LU-1510N LU-1510N-7 LU-1509N LU-1509NH LU-1511N-7 LU-1560N LU-1560N-7 LU-1565N LU-1561N LU-1561N needle, Lockstitch Machine LH-3128 LH LH-3168 LH LH-3178 LH LH-3188 LH LH-3120 LH-3126F LH LH Overlock/afety titch Machine MO-6100D ERIE MO-6700 ERIE MO-6900 ERIE MO-6900R ERIE MO-6900C ERIE MO-6900G ERIE MO-6900J ERIE L-3 L-4 4 Zigzag titching Machine LZ-2290 ERIE LZ-2280N LZ-2281N LZ-2282N LZ-2282N-7 LZ-2284N LZ-2284N-7 LZ-2286N LZ-2288N LZ-2285N LZ-2280NU LZ-2284NU LZ-2284NU-7 LZ-2284C-7/C-910 LZ-271 LZ-391N LZ Covering titch Machine MF-7722 MF-7723 MF-2600 uttonholing Machine 9 Eyelet uttonholing Machine LH-1790 LH-780 ERIE MH-180 MH-180 MH-180L ME-3200 ME-3200R ME-3200J ME-3200C ME-3200T 10 pecial Purpose Machine ML-111 C-638 C-640 C-641 MP-200N LT Computer-controlled Cycle Machine M-210D M-210D P TYPE M-210DHL6100Z M-210DHL6300Z M-215D M-221D M-215D P TYPE M-221D P TYPE M-223C M-224C M-223P M-224P utomatic utton ewing Indexer utomatic uttonholing Indexer CF CF CF LU-1520N-7 LU-1521N-7 LU-2210N-7 LU-2210W-7 LU-2260N-7 LU-2260W-7 LZH-1290 LZH Long rm ewing Machine LU-2216N-7 LU-2266N-7 DU-580 DNU-261H 17 Cylinder-bed ewing Machine DU-145 DU DC-244 DC DC-245 DC DC-246 DC L-1340 L-1341 L-1342 L Post-bed ewing Machine PLC-1610 PLC PLC-1660 PLC-1660L PLC-1665 PLC PLC-1690 PLC-1691 PLH-981 PLH-982 PLN-985 PLN Machine for Extra Heavy Materials TU-273 TNU-243 LG-158 LG TH-411 TN-421 TU-471 TC-441 TC Double Chainstitch Machine 13 utomatic Machine FL-350N FL-350N 17 MH-380 MH-382 MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4) MH-1410 M-1190 M-1260 M-1261 VP-875 VP-875 PW-297 PW-297 PW-298 PW-194N PW-195N PW-196N MOL-254 N-697 N Motors Devices & oftware C-910 C-380 EC-10 V050 ERIE PGM-20 PM-1

3 1-needle, Lockstitch Machine DDL-5530N DDL-5550N DDL-5550N-7 (with automatic thread trimmer) 1 The sewing machine has been designed by a computer to achieve the optimal balance and the structure of the sewing machine frame has been strengthened. This reduces vibration and operation noise, allowing the operator to use the machine more comfortably. s a result, the sewing machine greatly improves the working environment. The thread take-up mechanism, feed mechanism, thread paths and hook have been further improved to enhance responsiveness to material changes and to ensure consistent stitch quality. (DDL-5550N-7) DDL-5550N-7-W/CP-160 PECIFICTION Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil DDL-5530N For medium-weight materials 4,500rpm 5mm 30.7mm D1 (#14) For JE: 134 (Nm75) DDL-5530N For light-weight materials 4,000rpm 4mm 29mm y hand: 5.5mm, y knee: 13mm D1 (#9) For JE: 134 (Nm65) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1(equivalent to IO VG7) DDL-5530NH For heavy-weight materials 3,500rpm 5mm 35mm D1 (#21) For JE: 134 (Nm130) Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil DDL-5550N For medium-weight materials 5,500rpm 5mm 30.7mm y hand: 5.5mm, y knee: 13mm D1 (#14) For JE: 134 (Nm75) DDL-5550N For light-weight materials 4,000rpm DDL-5550NH For heavy-weight materials 4mm 5mm 29mm 35mm y hand: 4mm, y knee: 9mm y hand: 5.5mm, y knee: 13mm D1 (#9) D1 (#21) For JE: 134 (Nm65) For JE: 134 (Nm130) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Total weight DDL-5550N-7 For medium-weight materials 5,000rpm 30.7mm y hand: 5.5mm, y knee: 13mm D1 (#14) For JE: 134 (Nm75) 4mm DDL-5550N-7 For light-weight materials DDL-5550NH-7 For heavy-weight materials 5mm 29mm 35mm y hand: 4mm, y knee: 9mm y hand: 5.5mm, y knee: 13mm D1 (#9) D1 (#21) For JE: 134 (Nm65) For JE: 134 (Nm130) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Provided as standard 4,000rpm ingle-phase V, V, 3-phase V 650V 81kg DDL-5530N, 5550N, 5550N-7 (eptember, 2003) 1/2

4 WHEN YOU PLCE ORDER DDL5530N DDL5550N DDL5550N 7 pplication For medium-weight materials For light-weight materials For heavy-weight materials H Wiper and automatic reverse feed function Wiper utomatic reverse feed function Not provided Provided Provided Provided 0 W uto-lifter (optional) Not provided Provided (K85) K PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4). Operation panel Operation panel IP-100C CP-160 IP100C CP160 OPTION Model K85 E-4 ED-2 Part No. GE Description uto-lifter Remaining bobbin thread detector Material edge sensor Feature When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread. When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches Micro-lifter (asm.) This device can be installed on the back of the faceplate. It is very convenient for frequent use. To retrofit the E-4 to your existing machine, I/O board (part number: ), which is separately available, is required. Remaining bobbin thread detector (E-4) Material edge sensor (ED-2) DDL-5530N, 5550N, 5550N-7 (eptember, 2003) 2/2

5 1-needle, Lockstitch Machine DDL-8700 DDL (with automatic thread trimmer) The optimum-balance and highly rigid machine head were created using the latest 3D-CD design technology. Thanks to its low vibration and low noise feature, the machine head provides the operator with a comfortable work environment. In addition, the distance from the machine arm to the needle on the front of the machine head is sufficiently wide to allow easy handling of the sewing material. The machine inherits the desirable features, such as high-speed stitching performance, extreme stitching performance, ease of operation, and reliability, from the highly evaluated previous JUKI lockstitch machines. The thread take-up, hook, thread path, presser foot and feed mechanisms have been thoroughly investigated and modified to enable low-tension sewing. The machine flexibly responds to various kinds of materials, producing beautiful seams of consistent quality. Enhanced maintainability is ensured by the improved machine head, such as incorporation of an eccentric pin that is used to adjust the feed dog. In addition, the machine is provided with a mounting seat for attachment to improve workability while replacing the attachment and increasing the durability of the machine bed surface. DDL The machine comes with a thread trimming mechanism that performs speedy and sure thread trimming to achieve highly efficient sewing work. PECIFICTION DDL W/CP Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Feed dog Hook Lubrication Lubricating oil Weight of the machine head Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Feed dog Hook Lubrication Lubricating oil utomatic reverse feed function Wiper Power requirement Power consumption Total weight DDL-8700 DDL-8700 DDL-8700H For medium-weight materials For light-weight materials For heavy-weight materials 5,500rpm 4,000rpm 5mm 4mm 5mm 30.7mm 35mm y hand: 5.5mm, y knee: 13mm y hand: 4mm, y knee: 9mm y hand: 5.5mm, y knee: 13mm D1 (#14) #9#18 D1 (#9) #9#11 D1 (#21) #19#23 For JE: 134 (Nm90) For JE: 134 (Nm65) For JE: 134 (Nm130) 4-row 3-row utomatic-lubricating full-rotary hook utomatic JUKI Machine Oil No.7 (equivalent to IO VG7) 28kg DDL DDL DDL-8700H-7 For medium-weight materials For light-weight materials For heavy-weight materials 5,000rpm 4,000rpm 4mm 5mm 30.7mm 35mm y hand: 5.5mm, y knee: 13mm y hand: 4mm, y knee: 9mm y hand: 5.5mm, y knee: 13mm D1 (#14) #9#18 D1 (#9) #9#11 D1 (#21) #19#23 For JE: 134 (Nm90) For JE: 134 (Nm65) For JE: 134 (Nm130) 4-row 3-row utomatic-lubricating full-rotary hook utomatic JUKI Machine Oil No.7 (equivalent to IO VG7) Provided as standard Provided as standard for DDL W model. ingle-phase V, V, 3-phase V 650V 81kg DDL-8700, (eptember, 2003) 1/2

6 WHEN YOU PLCE ORDER DDL8700 DDL pplication For medium-weight materials For light-weight materials For heavy-weight materials H Wiper and automatic reverse feed function Wiper Not provided Provided utomatic reverse feed function Provided Provided 0 W uto-lifter (optional) Not provided Provided (K85) K PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4). Operation panel Operation panel IP-100C CP-160 IP100C CP160 OPTION Model K85 E-4 ED-2 Part No. GE Description uto-lifter Remaining bobbin thread detector Material edge sensor Feature When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread. When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches Micro-lifter (asm.) This device can be installed on the back of the faceplate. It is very convenient for frequent use. To retrofit the E-4 to your existing machine, I/O board (part number: ), which is separately available, is required. Remaining bobbin thread detector (E-4) Material edge sensor (ED-2) DDL-8700, (eptember, 2003) 2/2

7 Direct-drive, High-speed, 1-needle, Lockstitch Machine with utomatic Thread Trimmer DDL-9000 With its newly developed large machine head, the DDL-9000 dramatically upgrades seam quality and increases efficiency. The DDL-9000 incorporates a direct-drive system (DD system) that offers quick start-up, upgraded stop accuracy, excellent responsiveness, and a stronger needle thrust for faster, better penetration into the material. Designed without an oil pan, the machine offers improved maintainability with easy removal of dust and lint. PECIFICTION DDL-9000D-W/CP-160D 1 Model name Dry head type Minute-quantity lubrication type DDL-9000D DDL-9000DF DDL-9000 DDL-9000H pplication For light- to For extra light-weight materials For light- to For heavy-weight materials medium-weight materials and foundation medium-weight materials Max. sewing speed 4,000rpm 3,500rpm 5,000rpm 4,500rpm Max. stitch length 5mm 4mm 5mm Needle bar stroke 30.7mm 35mm Lift of the presser foot y hand : 5.5mm, y knee : 15mm, auto : 10mm Lubrication No lubrication Minute-quantity lubrication to needle bar and hook Lubricating oil JUKI New Defrix Oil No.1 (equivalent to IO VG7) Hook Exclusive no-lubricating hook (plastic hook with special-purpose race surface) utomatic lubricating hook Needle D1 (#14) #9#18 D1 (#9) #8#11 D1 (#14) #9#18 D1 (#21) #19#23 (at the time of delivery) For JE:134 (Nm75) Nm65Nm110 For JE:134 (Nm65) Nm65Nm75 For JE:134 (Nm75) Nm65Nm110 For JE:134 (Nm130) Nm120Nm160 Free space for sewing ize of bed obbin thread winder Machine head drive utomatic reverse feed function Power requirement Power consumption Total weight 300mm 517mm178mm uilt-in the machine head Compact C servomotor that is directly connected to the main shaft (direct-drive system) Provided as standard ingle-phase V, V, 3-phase V/650V 84.5Kg WHEN YOU PLCE ORDER DDL9000 Machine head type Dry head Minute-quantity lubrication D pplication For light- to medium-weight materials For heavy-weight materials H For extra light-weight materials and foundation F Wiper Not provided 0 Provided W For the sewing specification "H," only the minute-quantity lubrication type ( type) machine head is available. For the sewing specification "F," only the dry head type (D type) machine head is available. Device and attachment Not provided uto-lifter (pedal-driven) K118 PC box C910 PC box For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box Provided with a built-in I/O board Operation panel Operation panel IP-100 CP-160D Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-8). IP100 CP160D DDL-9000 (eptember, 2003) 1/2

8 OPTION Model K118 E-8 ED-4 Part No GE Description uto-lifter Optional switch Remaining bobbin thread detector Material edge sensor Micro-lifter (asm.) Feature This switch, mounted on the reverse feed switch, enables handy control of various functions. It is especially effective when operating the machine while standing. When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press, on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread. (Only supported by the minute-quantity lubricating type machine) When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. This device can be installed on the back of the face plate. It is very convenient for frequent use. To retrofit the E-8 to your existing machine, I/O board (part number: ), which is separately available, is required. C-910 C-910 model control box is resistant to voltage fluctuations. It comes with a compact and energy-saving type switching power supply system that does not use a transformer. This contributes to improved reliability. The number of revolutions can be selected from among three different types (standard, slow and fast) according to the preference of the operator. In addition to this feature, the control box incorporates many different functions for upgraded workability. Newly developed control box. IP-100 The operation panel can be selected according to the process. The operation panel has been provided with a large userfriendly LCD. pictograph and set values are shown on the same screen, which promises improved operability of the panel. The operation panel has been provided with a variety of communication and maintenance control features and is able to store data on a martmedia or personal computer. The features of the operation panel can be updated without the need for changing the PW/ROM. CP-160D Four different kinds of pattern sewing are possible: automatic reverse stitching, constant-dimension sewing, rectangle-shape sewing, and multi-layer stitching. The maximum number of stitches that can be set for automatic reverse stitching (single or double) is 19. DDL-9000 (eptember, 2003) 2/2

9 1-needle, Needle-feed, Lockstitch Machine DLN-5410N DLN-5410N-7 (with automatic thread trimmer) The machine head has been redesigned to improve the performance of each component. y the machine's low-tension sewing capability and the adjustment function for the needle-feed amount (±15%), the machine performs stitches without uneven material feeding and puckering, thus enhance the machine's ability to respond to any change in the material to be sewn. DLN-5410NJ-7 y increasing the maximum feed amount (stitch length) to 4.5mm and the needle bar stroke to 33mm, penetration into heavy-weight materials and ease of operation have been considerably enhanced. The horizontal-axis double-capacity hook effectively cuts the frequency of troublesome bobbin thread replacement procedures in half. DLN-5410N-7-W/CP PECIFICTION pplication Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil DLN-5410N For light- to medium-weight materials 5,000rpm 4mm D1 (#14) For JE: 134 (Nm90) DLN-5410NH For heavy-weight materials 4,000rpm 4.5mm 30.7mm y hand: 5.5mm, y knee: 13mm D1 (#21) For JE: 134 (Nm130) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) DLN-5410NL For heavy-weight materials (long stitch length type) 3,000rpm 6mm D1 (#21) For JE: 134 (Nm130) Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Thread Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Total weight DLN-5410N-7 For light- to medium-weight materials 5,000rpm 4mm D1 (#14) For JE: 134 (Nm90) 30.7mm utomatic-lubricating full-rotary hook DLN-5410NH-7 For heavy-weight materials y hand: 5.5mm, y knee: 13mm D1 (#21) For JE: 134 (Nm130) utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Provided as standard 4,000rpm 4.5mm ingle-phase V, V, 3-phase V 650V 83kg DLN-5410NJ-7 For jeans 33mm D1 (#21) For JE: 134 (Nm130) utomatic-lubricating double-capacity full-rotary hook #30#8, 4692, Nm60/330/3 DLN-5410N, 5410N-7 (eptember, 2003) 1/2

10 WHEN YOU PLCE ORDER DLN5410N DLN5410N 7 pplication For light- to medium-weight materials pplication For light- to medium-weight materials Wiper and automatic reverse feed function Wiper utomatic reverse feed function uto-lifter (optional) Not provided For heavy-weight materials For heavy-weight materials (long stitch length type) H L For heavy-weight materials For jeans H J Not provided Provided Provided Provided 0 W Provided (K85) K PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4 or E-5). Operation panel Operation panel IP-100C CP-160 IP100C CP160 OPTION Model K85 E-4 E-5 ED-2 Part No. GE GE Description uto-lifter Remaining bobbin thread detector Material edge sensor Feature When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread. For DLN-5410NJ-7, select E-5 When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches Micro-lifter (asm.) This device can be installed on the back of the faceplate. It is very convenient for frequent use. To retrofit the E-4 or E-5 to your existing machine, I/O board (part number: ), which is separately available, is required. Remaining bobbin thread detector (E-4) Material edge sensor (ED-2) DLN-5410N, 5410N-7 (eptember, 2003) 2/2

11 High-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook DLN DLN (with automatic thread trimmer) The needle bar stroke is as high as 35mm. This offers increased penetration of the needle into the material to improve adaptability to heavy-weight materials. The machine demonstrates excellent sewing capabilities, when sewing heavy-weight denim or multi-layered portions, that free it of sewing troubles such as stitch gathering, stitch skipping and needle breakage. The machine is able to sew material with a low presser foot pressure while preventing the material from flapping. s a result, the material can be sewn free of puckering. The top- and bottom-roller style feed mechanism forms seams with increased consistency to achieve improved hemming quality while reducing uneven hems. DLN PECIFICTION Model name DLN-6390 DLN pplication ottom-folding and hemming (lockstitch type) Max. sewing speed 5,000rpm titch length gears: 3.2mm (2.8mm) / upplied gears: 2.3mm, 3.6mm / Optional gears: 2.1mm, 2.5mm, 4.2mm (utilized by changing pitch conversion gears) Needle CHMET UY180GV Nm140 range of use: Nm90 ~ Nm150 (equivalent to #14 ~ #22.5) Needle bar stroke 35mm Hook utomatic-lubrication type exclusive full-rotary 1.7-fold hook Lift of the presser foot Max. 14mm Feed system Top- and bottom-roller style inder open/close type Manual type Driven by air cylinder Compressed air and air consumption 0.5MPa (0.5kgf/F), 10NR/min Lubrication JUKI New Defrix Oil No.1 (equivalent to IO VG7) Motor 400 W clutch motor or higher class motor is applicable C380(JUKI exclusive motor) Cylinder-bed diameter 180mm Weight of the machine head 34.5kg 36.5kg WHEN YOU PLCE ORDER Without automatic thread trimmer With automatic thread trimmer DLN6390 DLN6390 7W0 pplication pplication Wiper and automatic reverse feed function Wiper utomatic reverse feed function Provided Not provided W0 Option Not provided With needle cooler Z PC ox C Motor for C M PC box For General Export ingle-phase V 07 3-phase V 11 For JU (L) ingle-phase V 37 3-phase V 38 For CE ingle-phase V 34 PC box For General Export ingle-phase 3-phase V 60 For JU (L) ingle-phase V 61 3-phase V 62 For CE ingle-phase V 63 DLN-6390, DLN (eptember, 2003) 1/2

12 DEVICE CONFIGURTION Y MODEL DLN-6390 DLN Thread trimmer Provided as standard Manual binder (coupled to the presser lifter) Provided as standard Pneumatic K device (auto-lifter) Provided as standard Pneumatic binder (coupled to the K device) Provided as standard Edge guide ccessory ccessory Mechanical wiper Provided as standard Thread trimmer air blower Provided as standard Needle cooler Option Option OPTION Needle cooler The needle cooler helps reduce the occurrence of thread breakage caused by needle heat when sewing is performed at a speed of 4,000rpm or more. The components differ with the type of machine head, i.e, with or without the thread trimmer. elections should be made by referring to the following table. Machine head Type Part No. For DLN-6390 Mechanical valve type, provided with regulator For DLN olenoid valve type, not provided with regulator DEVICE CONFIGURTION Y MODEL Feed rollers, pressers, feed adjusting gears and binders from the UNION PECIL model machine can be attached to the DLN-6390/ with no additional machining or adjustments. Parts provided as standard Presser foot 1/2" Part No.: Options inder 1/2" Part No.: Feed roller 1/2" Part No.: (Top roller) 1/2" Part No.: (ottom roller) ➀ ➁ ➂ ➃ ➅ ➄ ➆ Hem width 3/8" ➀Part No.: Hem width 1" ➁Part No.: Hem width 1" (asm.) ➂Part No.: /2" roller (knurled type) ➃Part No.: (Top roller) ➄Part No.: (ottom roller) 1" roller (knurled type) ➅Part No.: (Top roller) ➆Part No.: (ottom roller) Table of feed amount adjustment/conversion gears The shaded portion indicates the factory-attached gear present at the time of delivery. It can be interchanged with other gears supplied with the machine to support four different feed amounts. Top gear ottom gear Feed pitch JUKI part No. Engraved marker JUKI part No. Engraved marker 4.2mm (6 stitch/inch) Option 3.6mm (7 stitch/inch) mm (8 stitch/inch) Remarks upported by the gear supplied with the machine. factory-attached gear present at the time of delivery 2.8mm (9 stitch/inch) upported by changing over the factory-attached top and bottom gears. 2.5mm (10 stitch/inch) Option 2.3mm (11 stitch/inch) upported by the gear supplied with the machine. 2.1mm (12 stitch/inch) Option DLN-6390, DLN (eptember, 2003) 2/2

13 Direct-drive, High-speed, Needle-feed, Lockstitch Machine with utomatic Thread Trimmer DLN-9010 Thanks to the needle-feed mechanism which offers excellent efficiency of feed, the machine ensures accurate stitch pitches (stitch length) as well as preventing slippage of the upper cloth. The bottom feed's locus has been improved to match the needle feed motion, thus the machine produces beautiful seams without stitch gathering, even when it is used for sewing slippery and difficult-to-feed material or for handling a difficult process. The needle feed mechanism is a so-called "dry type", which does not require oiling. With this mechanism, a highly reliable machine structure, free from oil leakage troubles, has been achieved. The frame, which requires only a minute quantity of lubricating oil, is structured to eliminate oil leakage. PECIFICTION DLN-9010-W/CP-160D 1 Model name DLN-9010 DLN-9010H pplication For light- to medium-weight materials For heavy weight materials Max. sewing speed 5,000rpm 4,000rpm Max. stitch length 4.5mm Needle bar stroke 33mm Lift of the presser foot y hand: 5.5mm, y knee: 15mm(max.), uto: 10mm Needle (at the time of delivery) D1 (#11) #9#18 D1 (#21) #20#23 For JE:134 (Nm90) Nm65Nm110 For JE:134 (Nm130) Nm120Nm160 Hook utomatic-lubricating full-rotary hook Lubrication Minute-quantity lubrication to needle bar and hook Lubricating oil JUKI New Defrix Oil NO.1 (equivalent to IO VG7) Distance from needle to machine arm 300mm ize of bed 517mm178mm obbin thread winder uilt-in the machine head Micro-lifter screw Provided as standard Machine head drive Compact C servomotor that is directly connected to the main shaft (direct-drive system) utomatic reverse feed function Provided as standard (built-in solenoid type) Power requirement/power consumption ingle-phase V, V, 3-phase V650V Total weight 87kg The maximum sewing speed is 4,000 rpm or less in cases where the maximum stitch length is 3.5 mm or more. WHEN YOU PLCE ORDER DLN9010 Machine head type pplication For light- to medium-weight materials For heavy-weight materials H Wiper and automatic reverse feed function Wiper utomatic reverse feed function Not provided Provided 0 Provided Provided W Device and attachment Not provided uto-lifter (pedal-driven) K118 PC box PC box C910 For JU(L) ingle-phase V PFL For JUGeneral Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box Provided with a built-in I/O board Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-8). Operation panel Operation panel IP-100 IP100 CP-160D CP160D DLN-9010 (eptember, 2003) 1/2

14 OPTION Model K118 E-8 ED-4 Part No GE Description uto-lifter Optional switch Remaining bobbin thread detector Material edge sensor Micro-lifter (asm.) Feature This switch, mounted on the reverse feed switch, enables handy control of various functions. It is especially effective when operating the machine while standing. When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press, on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread. (Only supported by the minute-quantity lubricating type machine) When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. This device can be installed on the back of the face plate. It is very convenient for frequent use. To retrofit the E-8 to your existing machine, I/O board (part number: ), which is separately available, is required. DLN-9010 (eptember, 2003) 2/2

15 1-needle, ottom & Variable Top-feed Lockstitch Machine DLU-5490N 1 DLU-5490N-7(with automatic thread trimmer) The walking foot provides stable feed at all times, assuring high quality. It also eliminates the need for proficiency. The top-feed motion ideally synchronized with the bottom-feed motion to uniformly feed the upper and lower cloths, assuring attractive stitches and uniform gathering stitches. This leads to a higher value of finished products. The maximum top-feed amount is 8mm. The top-feed amount has been increased to assure stable gathering stitches. DLU-5490N-7-W/CP-160 PECIFICTION Model name Max. sewing speed Max. stitch length Max. top-feed amount Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Weight DLU-5490N Machine head: 30kg 4,500rpm 5mm 8mm 30.7mm y hand: 5.5mm, y knee: 13mm D1 (#14), For JE: 134 (Nm90) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) DLU-5490N-7 Provided as standard ingle-phase V, V 3-phase V 650V Total weight: 83kg OPTION Model K85 E-4 ED-2 Part No. GE Description uto-lifter Remaining bobbin thread detector Material edge sensor Feature When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread. When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. PF Partial shirring device Micro-lifter (asm.) The partial shirring device permits very easy shirring. This device can be installed on the back of the faceplate. It is very convenient for frequent use. To retrofit the E-4 to your existing machine, I/O board (part number: ), which is separately available, is required. Remaining bobbin thread detector (E-4) Material edge sensor (ED-2) DLU-5490N, 5490N-7 (eptember, 2003) 1/2

16 WHEN YOU PLCE ORDER DLU5490N DLU5490N 7 pplication For light-weight materials For medium-weight materials For heavy-weight materials For edge welt seam topstitching To prevent it from catching materials For sewing sharp curves C C CG D pplication For elastic materials For setting zipper (right) For binding For bottom hemming For piping For zipper attaching (left) For preventing puckering Note E J L M N P Wiper and automatic reverse feed function Wiper Not provided Provided When using the gauges L, M & N, attach them to the binder, etc. ince the prices are separate, please ask us of them. Various gauges other than those shown are also available. utomatic reverse feed function Provided Provided 0 W uto-lifter (optional) Not provided Provided (K85) K PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4). Operation panel Operation panel IP-100C CP-160 IP100C CP160 DLU-5490N, 5490N-7 (eptember, 2003) 2/2

17 1-needle, ottom & Variable Top-feed, Lockstitch Machine with utomatic Thread Trimmer and Programmable hirring Control Device DLU-5494N-7/CP The machine enables even inexperienced operators to perform shirring operation smoothly and easily. The microcomputer-controlled shirring mechanism allows even inexperienced operators to carry out shirring operations skillfully, producing high-quality products with consistency. While shirring, an operator can enter a program through the use of the teaching function, thereby duplicating a high-quality shirring operation by performed program. PECIFICTION DLU-5494N-7/CP-560 Model name Max. sewing speed Max. stitch length Max. top-feed amount Needle bar stroke Lift of the presser foot Needle(at the time of delivery) Hook Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Total weight DLU-5494N-7/CP-560 4,000rpm (normal 3,500rpm) 5mm (normal feed), 3mm (reverse feed) 8mm (top-feed amount varies depending on the type of gauge) 30.7mm y hand: 5.5mm, y knee: 13mm D1 (#14), For JE: 134 (Nm90) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Provided as standard ingle-phase V, V, 3-phase V Power rating 400V 85kg TRGETED INDUTRIL PPLICTION ND PROCEE Targeted industrial applications Men's and ladies' suits lazer coats Coats lousons lacks kirts Men's shirts louses Dresses One-piece dresses portswear weaters Others Processes 1) Runstitching process Runstitch front edge, join shoulder, sew center of back, seam side, set sleeve to armhole, etc. 2) Topstitching process Topstitch front edge, topstitch sleeve cuff, topstitch collar, topstitch waistband, etc. 3) Gathering process ttach yoke, attach cuff, join top and bottom, etc. 4) ewing process with an attachment used in combination with the machine Hem bottom, piping, binding, etc. 5) Others Zipper-attachment process, blind-stitching process, sewing processes in which different materials are used in combination, etc. DLU-5494N-7/CP-560 (eptember, 2003) 1/2

18 WHEN YOU PLCE ORDER DLU5494N 7 Gauge set Wiper and automatic reverse feed function uto-lifter (optional) pplication For light-weight materials (standard) Note: Various gauges other than those shown are also available. Wiper Not provided Provided utomatic reverse feed function Provided Provided 0 W Not provided Provided (K85) K PC box/control panel/motor for C C801 D560 For General Export For CE For JU (L) ingle-phase 220V 3-phase 220V ingle-phase 230V ingle-phase 120V 3-phase 220V PC box PFL PFL PFL PFL PFL Japanese, English, Chinese English, German, French, panish, Italy Japanese, English, Chinese English, German, French, panish, Italy English, German, French, panish, Italy English, German, French, panish, Italy English, German, French, panish, Italy Control box Optional unit If an auto-lifter is installed on the machine, the presser foot will be lifted/lowered by the foot pedal. JU: North merica and Central and outh merica. Control panel CP-560 Pulley belt Lockstitch for general fabric D 560 Control panel CP-560 Indication panel ervomotor/controller C-801 OPTION Model Part No. Description Feature K85 uto-lifter E-4 GE Remaining bobbin thread detector When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press, on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread Micro-lifter (asm.) This device can be installed on the back of the face plate. It is very convenient for frequent use. DLU-5494N-7/CP-560 (eptember, 2003) 2/2

19 1-needle, Differential-feed, Lockstitch Machine DLD-5430N DLD-5430N-7 (with automatic thread trimmer) With optional devices such as a partial shirring device (PF-7) and gathering attachment mounted on the machine, beautiful gathers can be sewn with enhanced efficiency. This new, upgraded-quality machine provides not only operating comfort, but also dramatically improved seam quality, further cost reduction, and excellent productivity. The thread take-up mechanism, thread path components and differential feed mechanism have all been improved. Thanks to these improvements, partial shirring can be performed with minimum tension applied to the material, thus leading to greater flexibility in responding to different types of material. DLD-5430N-7-W/CP PECIFICTION Model name Max. sewing speed Max. stitch length Max. top-feed amount Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Weight DLD-5430N Machine head: 29kg 4,500rpm 5mm hirring 1:1.5 (Max. 1:3), tretching 1: mm y hand: 5.5mm, y knee: 13mm D1 (#14), For JE: 134 (Nm90) utomatic-lubricating full-rotary hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) DLD-5430N-7 Provided as standard ingle-phase V, V 3-phase V 650V Total weight: 82kg This ratio applies provided that the stitch length does not exceed 2.5mm. OPTION Model K85 E-4 ED-2 Part No. GE Description uto-lifter Remaining bobbin thread detector Material edge sensor Feature When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread. When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. PF-7 Q036 Partial shirring device Gathering attachment The partial shirring device permits very easy shirring. For high-quality gathering, both effectively and consistently Micro-lifter (asm.) This device can be installed on the back of the faceplate. It is very convenient for frequent use. To retrofit the E-4 to your existing machine, I/O board (part number: ), which is separately available, is required. Remaining bobbin thread detector (E-4) Material edge sensor (ED-2) Gathering attachment (Q036) DLD-5430N, 5430N-7 (eptember, 2003) 1/2

20 WHEN YOU PLCE ORDER DLD5430N7 Wiper and automatic reverse feed function Wiper Not provided Provided utomatic reverse feed function Provided Provided 0 W uto-lifter (optional) Not provided Provided (K85) K PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4). Operation panel Operation panel IP-100C CP-160 IP100C CP160 DLD-5430N, 5430N-7 (eptember, 2003) 2/2

21 1-needle, Lockstitch Machine with Edge Trimmer DLM-5200N DLM-5210N (exclusive machine for piping) The highly efficient lockstitch machine which assures the consistent quality of finished seams comes with a sharp knife capable of cutting various types of material. The DLM-5200N series is composed of high-quality sewing machines provided with these two main features, both of which are designed to significantly upgrade the functions. The knife is designed so that the angle can be changed as desired, allowing the knife to be easily applied to any type of material. The knife can be attached by simply pressing the presser plate on the machine arm. The knife is removed also by the simple operation of the knob. Thus the type of stitching, such as with or without knife, can be changed with ease. The adjustment of the needle and needle gauge can be made by the simple change of the sub-gauges. DLM-5200N 1 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Max. thickness of the material to be cut Lubrication Lubricating oil Weight of the machine head DLM-5200N DLM-5210N Front knife type 4,500rpm 4,000rpm 5mm (normal/reverse feed) 4mm (normal/reverse feed) 30.7mm y hand: 4mm, y knee: 10mm D1 (#14), For JE: 134 (Nm90) utomatic-lubricating full-rotary hook 4mm utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) 30kg WHEN YOU PLCE ORDER DLM5200N DLM5210N/ N01 ub-gauge type Type of binder Finished width Distance between the needle and the knife 3.2mm (1/8") standard 2.4mm (3/32") 4.0mm (5/32") 4.8mm (3/16") D C E F Rolled hem Clean finish, top and bottom N011 N015 N011 N015 5mm 6mm 7mm 9.5mm C E 6.4mm (1/4") H 9.5mm (3/8") M DLM-5200N, 5210N (eptember, 2003) 1/2

22 DLM-5200N U-GUGE ET LIT pecifications of the sub-gauge Gauge width Throat plate Throat plate cover (asm.) Gauge Throat plate chip guard Chip guide Hinging presser (asm.) Feed dog Knife C 2.4mm (3/32") D X N N D 3.2mm (1/8") D N N E 4.0mm (5/32") F Y N N F 4.8mm (3/16") F T N N H 6.4mm (1/4") F U W M 9.5mm (3/8") M V W This is made to order as an auxiliary part only C 2.0mm (5/64") D Y N N H 6.4mm (1/4") F U K 7.9mm (5/16") M Y W DLM-5210N/ N011, N015 TTCHMENT N011 Finished width N015 Rolled hem 1mm 1mm 10mm Clean finish, top and bottom Finished width N011 emi-fold inder (cut-before knife, rolled hem) Exclusive sub-gauge Finished width 7mm 6mm 5mm Tape width 24mm 22mm 20mm Part No. of the attachment MN-0110G-00 MN-0110F-00 MT N0 N015 inder (clean finish, top and bottom) Finished width 9.5mm 7mm 6mm 5mm Tape width 34mm 26mm 22mm 20mm Part No. of the attachment MN-0150J-00 MN-0150G-00 MN-0150F-00 MT N0 Gauge C Gauge E C Presser foot (asm.) C Exclusive sub-gauge Presser foot (asm.) E C Front knife Front knife DLM-5200N, 5210N (eptember, 2003) 2/2

23 1-needle, ottom-feed, Lockstitch Machine with Vertical Edge Trimmer and automatic thread trimmer DLM-5400N-7 1-needle, Needle-feed, Lockstitch Machine with Vertical Edge Trimmer and automatic thread trimmer DMN-5420N-7 The knife is capable of cutting any kind of material regardless of its thickness or toughness, including heavy-weight material, elastic material and brushing material. ince the knife lever has been plasted so as to prevent rust, there is no need to worry about the material becoming soiled with rust. The thread trimmer is designed to cut various threads of different thicknesses, so the range of the applicable thread thickness number has been widened. The thread trimmer can therefore cut even a thick thread with ease. The cloth trimming knife has been designed so that it can move as much as 5.5mm toward you from the center of the needle. DLM-5400N-7-W/CP PECIFICTION Model name Max. sewing speed Feed system Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Hook Max. thickness of the material to be cut Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Total weight DLM-5400N-7 4,500rpm ottom-feed 4mm (normal/reverse feed) 83kg DMN-5420N-7 5,000rpm (Max. 4,000rpm with the stitch length set to 4mm or more) Needle-feed 5mm (normal feed), 3mm (reverse feed) 30.7mm y hand : 5.5mm, y knee : 10mm D1 (#14) #9#18, For JE: 134 (Nm90) utomatic-lubricating full-rotary hook 4mm utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Provided as standard ingle-phase V, V, 3-phase V 650V 84kg OPTION Model K85 Part No. Description uto-lifter Feature E-4 GE Remaining bobbin When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn thread detector the operator not to press on the front part of the foot pedal. With this function, the operator doesn t have to look away from the sewing work to check the bobbin thread. When the sensor detects a material edge, it immediately stops the sewing machine and actuates ED-2 Material edge sensor the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. To retrofit the E-4 to your existing machine, I/O board (part number: ), which is separately available, is required. DLM-5400N-7, DMN-5420N-7 (eptember, 2003) 1/3

24 WHEN YOU PLCE ORDER DLM5400N 7 ub-gauge type Wiper and automatic reverse feed function uto-lifter (optional) Distance between the needle and the knife 3.2mm (1/8") standard D Wiper Not provided utomatic reverse feed function Provided 0 Not provided Provided (K85) K 2.4mm (3/32") C Provided Provided W 4.0mm (5/32") E 4.8mm (3/16") F 6.4mm (1/4") H 9.5mm (3/8") M DMN5420N 7 ub-gauge type Feed dog Wiper and automatic reverse feed function uto-lifter (optional) Distance between the needle and the knife 3.2mm (1/8") standard 4.0mm (5/32") D E Coarse feed dog Wiper Not provided utomatic reverse feed function Not provided Provided 00 0 Not provided Provided (K85) K 4.8mm (3/16") F Provided Provided W 5.6mm (7/32") G 6.4mm (1/4") H 9.5mm (3/8") M PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4). Operation panel Operation panel IP-100C CP-160 IP100C CP160 DLM-5400N-7, DMN-5420N-7 (eptember, 2003) 2/3

25 DLM-5400N-7 U-GUGE ET LIT 1 pecifications of the sub-gauge Gauge width Throat plate Throat plate cover (asm.) Gauge Throat plate chip guard Chip guide Hinging presser (asm.) Feed dog Knife C 2.4mm (3/32") D X D N D 3.2mm (1/8") D D N E 4.0mm (5/32") D Y E N F 4.8mm (3/16") F T E N H 6.4mm (1/4") F U G W M 9.5mm (3/8") M V G W This is made to order as an auxiliary part only. C 2.0mm (5/64") D Y C N C00 C 2.4mm (3/32") D X D N0C E 4.0mm (5/32") D E N F 4.8mm (3/16") F T E N F 4.8mm (3/16") F Y0C E N G 5.3mm (27/128") F Y0F G N H 6.4mm (1/4") F U G K 7.9mm (5/16") F Y G W M 9.5mm (3/8") M V G P 11.1mm (7/16") M Y0M G W Knife support replacement knife attaching block replacement are also available. Wiper cannot be attached to the C and C type of sub-gauges. DMN-5420N-7 U-GUGE ET LIT pecifications of the sub-gauge Gauge width Throat plate Throat plate cover (asm.) Gauge Throat plate chip guard Chip guide Hinging presser (asm.) Feed dog Knife D 3.2mm (1/8") D E 4.0mm (5/32") F F 4.8mm (3/16") F G 5.6mm (7/32") F H 6.4mm (1/4") F M 9.5mm (3/8") M This is made to order as an auxiliary part only D E F G H M D E E G G G D E D E D E G H G H G H00 Coarse feed dog C 2.0mm (5/64") D C C C C00 D 2.8mm (7/64") D D D D E DC 3.2mm (1/8") D D0C D D0E DD 3.2mm (1/8") D D D J J J K 7.5mm (9/32") 7.5mm (19/64") 7.9mm (5/16") F F M J J K G G G G H G H G H e sure to use this gauge with the stitch length set to 2mm or less. e sure to use this gauge with the stitch length set to 2.5mm or less. Wiper cannot be attached to the C and D type of sub-gauges. DLM-5400N-7, DMN-5420N-7 (eptember, 2003) 3/3

26 2-needle, Needle-feed, Lockstitch Machine LH-3128 LH (with automatic thread trimmer) The tension applied to the bobbin thread has been reduced and the needle thread path has been thoroughly renovated to achieve highly consistent feed of the needle thread. Puckering, stitch skipping, thread breakage and isolated idling loops can be therefore prevented, enabling the machine to produce beautifully finished seams with consistency. fter the gauge has been replaced, the machine can be adapted to the newly installed gauge only by adjusting the clearance provided between the blade point of the hook and the needle. In this case, it is not necessary to change the hook timing in accordance with the gauge. s a result, the length of time required to replace the gauge is dramatically reduced. LH W/CP needle, Needle-feed, Lockstitch Machine with Organized plit Needle ar LH-3168 LH (with automatic thread trimmer) The organized split needle bars which enable either the left or right needle to stop independently of the other can be changed over by simply operating the lever, thereby saving labor in corner stitching. 2-needle, Needle-feed, Lockstitch Machine with Large Hooks LH-3178 LH (with automatic thread trimmer) Our investigation of the thread take-up stroke and other mechanisms results in the reduction of irregular stitches. Even at high speed, the machine performs sewing as consistently as the standard hook machine. The machine can make the most out of the advantageous features of the large hook, upgrading the finished quality of heavy-weight materials and improving efficiency. 2-needle, Needle-feed, Lockstitch Machine with Organized plit Needle ar and Large Hooks LH-3188 LH (with automatic thread trimmer) The organized split needle bar mechanism makes it possible to stop or reset the left or right needle by operating a one-touch utility lever. The machine produces neatly finished stitches at corner parts of the material. Improved thread tension and presser foot dramatically upgrades the seam adjusting ability. The range of thread counts that can be used is widened. LH W/CP needle, ottom-feed, Lockstitch Machine LH-3120 The machine has adopted a bottom-feed mechanism. This enables the machine to perform sewing with a low tension applied to the material while preventing puckering and stitch skipping, thereby improving consistency of seam quality. The machine is capable of adapting to the sewing of light-weight materials and newly-developed materials. This means that the machine is exceedingly effective to the process to sew top center plaits of shirts and the sewing of foundation. LH-3120 LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 1/12

27 PECIFICTION Without automatic thread trimmer Model name Feed system LH-3120 ottom-feed LH-3128 LH-3128 Needle-feed LH-3128G pplication Max. sewing speed 3,000rpm For light-weight For light-weight For medium-weight For jeans and materials materials materials heavy-weight materials Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook 4mm (normal/reverse feed) 5mm (normal/reverse feed) lide type 33.4mm y hand: 5.5mm, y knee: 12mm Vertical-axis regular hook Needle (at the time of delivery) DP5 (#9) #9#14 DP5 (#9) #9#14 DP5 (#14) #11#18 DP5 (#21) #18#22 Organized split needle bar mechanism Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head Not provided Fully automatic lubrication system by means of plunger pump JUKI New Defrix Oil No.2 (equivalent to IO VG32) 245mm 517mm178mm 38kg Model name Feed system pplication Max. sewing speed Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle (at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head LH-3168 LH-3168 LH-3168G LH-3178 LH-3178G LH-3188G Needle-feed For light-weight For medium-weight For jeans and For medium-weight For jeans and materials materials heavy-weight materials materials heavy-weight materials 3,000rpm 5mm (normal/reverse feed) lide type 33.4mm y hand: 5.5mm, y knee: 12mm Vertical-axis regular hook Vertical-axis double-capacity hook DP5 (#9) #9#14 DP5 (#14) #11#18 DP5 (#21) #18#22 DP5 (#14) #11#18 DP5 (#21) #18#22 Provided as standard Not provided Provided as standard Fully automatic lubrication system by means of plunger pump JUKI New Defrix Oil No.2 (equivalent to IO VG32) 245mm 517mm178mm 38kg With automatic thread trimmer Model name Feed system pplication Max. sewing speed Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle (at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head Power requirement Power consumption LH LH LH-3128G-7 Needle-feed For light-weight For medium-weight For jeans and materials materials heavy-weight materials 3,000rpm 5mm (normal/reverse feed) lide type 33.4mm y hand: 5.5mm, y knee: 12mm, y knee lifter with wiper: 9mm Vertical-axis regular hook DP5 (#11) #11#14 DP5 (#14) #11#18 DP5 (#21) #18#22 Not provided Fully automatic lubrication system by means of plunger pump JUKI New Defrix Oil No.2 (equivalent to IO VG32) 245mm 517mm178mm 43kg ingle-phase V, V, 3-phase V/650V Model name Feed system pplication Max. sewing speed Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook Needle (at the time of delivery) Organized split needle bar mechanism Lubrication Lubricating oil utomatic reverse feed function Distance from needle to machine arm ed size Weight of the machine head Power requirement Power consumption LH LH LH-3168G-7 LH LH-3178G-7 LH-3188G-7 Needle-feed For light-weight For medium-weight For jeans and For medium-weight For jeans and materials materials heavy-weight materials materials heavy-weight materials 3,000rpm 5mm (normal/reverse feed) lide type 33.4mm y hand: 5.5mm, y knee: 12mm, y knee lifter with wiper: 9mm Vertical-axis regular hook Vertical-axis double-capacity hook DP5 (#11) #11#14 DP5 (#14) #11#18 DP5 (#21) #18#22 DP5 (#14) #11#18 DP5 (#21) #18#22 DP5 (#21) #18#22 Provided as standard Not provided Provided as standard Fully automatic lubrication system by means of plunger pump JUKI New Defrix Oil No.2 (equivalent to IO VG32) Provided as standard 245mm 517mm178mm 43kg ingle-phase V, V, 3-phase V/650V LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 2/12

28 WHEN YOU PLCE ORDER With automatic thread trimmer Type pplication Wiper and automatic reverse feed function 2 Needle-feed Needle-feed with organized split needle bar Needle-feed with large hooks For light-weight materials For medium-weight materials For jeans and heavy-weight materials G Wiper Not provided utomatic reverse feed function Not provided Provided 00 0 Needle-feed with organized split needle bar and large hooks 88 Provided Not provided Provided W0 W LH31 7 uto-lifter Not provided Pedal switch type (K89) 89 Model name Needle gauge pec. mm inch C D E F G H K /32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8 W L M N P Q R /16 1/2 5/8 3/4 7/ /8 1-1/4 LH G LH G LH G LH G Gauges marked () are standard type. Please contact us for any gauge which is not included in the above table. PC box Motor for C Operation panel C910 M91 Operation panel IP-100 IP100 CP-160 CP160 Control box Pulley belt PC box For JU (L) ingle-phase V PFL For JU, General Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 3/12

29 Without automatic thread trimmer Type pplication ottom-feed 20 For light-weight materials Needle-feed 28 For medium-weight materials Needle-feed with organized split needle bar 68 For jeans and heavy-weight materials G Needle-feed with large hooks 78 Needle-feed with organized split needle bar and large hooks 88 LH31 C D E F G H K W L M N P Q R T U Needle gauge mm Model name pec. inch 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8 7/16 1/2 5/8 3/4 7/ /8 1-1/4 1-3/8 1-1/2 LH-3120 LH-3128 G LH-3168 G LH-3178 G LH-3188 G Gauges marked () are standard type. Please contact us for any gauge which is not included in the above table. OPTION Model Part No. Description Feature K89 uto-lifter V059 MV Tension-free feeder (tape feeder) The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation. T-36 Tape cutter The tape cutter is able to cut the tape just behind the presser foot (20mm away from the needle entry point). The cutter pressure is adjustable according to the material thickness utomatic reverse feed kit The automatic reverse feed function device can be mounted on the machine after the setup. (*ynchronizer not included.) Micro-lifter This device can be installed on the back of the face plate. It is very convenient for frequent use. LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 4/12

30 TTCHMENT Name ( No.) Top center plait hemmer (mousetrap latch type) (L030) pplication and seam specifications For making top center plait on men s shirts and hemming seats bed covers, etc. pplicable machines type type Name ( No.) Lapping seam folder (reverse) (M171) pplication and seam specifications For lapping seam in the various joining process including seaming sides of jeans, work uniforms, pantaloons etc. pplicable machines type G type 2 Pocket hemmer sewing type (L032) For hemming side pocket mouth of jeans, work uniforms etc. and hemming bottom of pants Garment Pocket bag type G type Left feed top stitch folder (M024) For seaming sides For seaming sides type G type Downturn hemmer (L045) Pocket binder (clean finish top and bottom) (N054) Top center plait (folder) (M315) Center plait folder (from neck down) (M037) Right feed piping folder (M137) Pajama piping folder (M163) For sewing outside pocket mouth of jeans, work uniforms, etc. To tape attaching process to bind edges of pocket bags of slacks, pants, skirts, etc. For attaching formal top center plait on men s shirts, etc. For making front facing from the neck side. Interlining To the process for sewing decorative pipings on sports wear, work uniforms, etc. For sewing pipings on the edges of pockets, top-center plaits, bottoms, sleeves, etc. of pajamas. type G type type type type type type type G type type type Right feed top stitch folder (M025) Tape attaching foot with center guide (006) ewing edge guide (H010) ewing roller guide (H011) Presser foot with guide (009) Compensating presser foot (020) ox pleats folder (small type) (M009) For opening seam of brassieres, body suits etc. Edge guide applicable to runstitching process and decorative stitching process Edge guide for runstitch process using vinylcoated cloth or man-made leather. Lapping seam process and counterstitching process for denim, drill, wool, gabardine, etc. For making top canter plaits of knit shirts, blouses, etc. and for making belts of ladies wear For sewing box pleats of skirts, box pleats at the back center of ladies overcoats, sewing box pleats of office uniforms, work uniforms, etc. type G type LH-3128F type type type G type type G type type G type type G type LH-3128 elt folder (turnable mousetrap latch type) (N012) For making belts including shoulder straps of children s rompers, belts of ladies overcoats etc. type G type Zipper guide (Q090) For runstitching left fly of pants and zippers type Lapping seam folder (M170) For lapping seam in the various joining process including joining sides of jeans, work uniforms, pantalons etc. type G type Zipper folder (004) ttaching zippers on skirts, jumpers, matcovers, etc. LH-3128 The part numbers are designated according to needle gauge and specification. e sure to confirm the part number of the attachment you need when placing your order with us. LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 5/12

31 TLE OF EXCHNGE PRT FOR LH3100 ERIE LH-3128 Needle gauge size Throat plate Feed dog Presser foot asm mm 2.0mm (tipdivided) 2.0mm 2.4mm (3/32") mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") D0H E 5.6mm (7/32") E0H F 6.4mm (1/4") F0H G 7.1mm (9/32") G0H H 7.9mm (5/16") H0H K 9.5mm (3/8") K0H W 11.1mm (7/16") L 12.7mm (1/2") L0H M 15.9mm (5/8") M0H N 19.1mm (3/4") N0H P 22.2mm (7/8") P0H Q 25.4mm (1") Q0H R 28.6mm (1-1/8") R0H mm (1-1/4") H T 34.9mm (1-3/8") T0H U 38.1mm (1-1/2") U0H titch spec. pec. common G LH Needle gauge size Throat plate with thread trimmer Feed dog (with thread trimmer) Needle clamp asm mm 2mm 2.4mm (3/32") spec. C 3.2mm (1/8") 4.0mm (5/32") ubstandard spec. pecial order D 4.8mm (3/16") E 5.6mm (7/32") F 6.4mm (1/4") G 7.1mm (9/32") H 7.9mm (5/16") K 9.5mm (3/8") W 11.1mm (7/16") L 12.7mm (1/2") M 15.9mm (5/8") N 19.1mm (3/4") P 22.2mm (7/8") Q 25.4mm (1") R 28.6mm (1-1/8") mm (1-1/4") T 34.9mm (1-3/8") U 38.1mm (1-1/2") titch spec. pec. common pec. common G LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 6/12

32 LH-3128/ Needle gauge size ed slide asm. (with thread trimmer) ed lide asm. (left) ed lide asm. (right) Needle gauge size Front metal Inner metal 2 ~ ~ ~ ~ W L N P Q U 2.4mm (3/32") ~ ~ ~ ~ 11.4mm (7/16") 12.7mm (1/2") 19.1mm (3/4") 22.2mm (7/8") 28.6mm (1-1/8") 31.8mm (1-1/4") 38.1mm (1-1/2") ~ ~ P Q U 2.4mm (3/32") ~ ~ 22.2mm (7/8") 25.4mm (1") 38.1mm (1-1/2") LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 7/12

33 LH-3168 Needle gauge size Throat plate Feed dog Presser foot asm mm 2.0mm (tipdivided) 2.0mm 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") D0H E 5.6mm (7/32") E0H F 6.4mm (1/4") F0H G 7.1mm (9/32") G0H H 7.9mm (5/16") H0H K 9.5mm (3/8") K0H L 12.7mm (1/2") L0H M 15.9mm (5/8") M0H N 19.1mm (3/4") N0H Q 25.4mm (1") Q0H titch spec. pec. common G LH Needle gauge size Throat plate with thread trimmer Feed dog (with thread trimmer) Needle clamp asm. Left Needle clamp asm. Right mm 2mm 3.2mm (1/8") spec. C D 4.0mm (5/32") 4.8mm (3/16") C DL C DR ubstandard spec. pecial order E 5.6mm (7/32") EL ER F 6.4mm (1/4") FL FR G 7.1mm (9/32") GL GR H 7.9mm (5/16") HL HR K 9.5mm (3/8") KL KR L 12.7mm (1/2") LL LR M 15.9mm (5/8") ML MR N 19.1mm (3/4") NL NR Q 25.4mm (1") QL QR titch spec. pec. common pec. common G LH-3168/LH Needle gauge size ed slide asm. (with thread trimmer) Needle gauge size Front metal Inner metal ed slide asm. (left) ed slide asm. (right) ~ ~ K L N 3.2mm (1/8") ~ ~ 9.5mm (3/8") 12.7mm (1/2") 19.1mm (3/4") ~ N Q 1/8" (3.2mm) ~ 3/4" (19.1mm) 1" (25.4mm) Q 25.4mm (1") LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 8/12

34 LH-3178 Needle gauge size Throat plate Feed dog Presser foot asm * 2.2 (tipdivided) 2.0mm 2.4mm 2 2.4mm (3/32") 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") E 5.6mm (7/32") F 6.4mm (1/4") G 7.1mm (9/32") H 7.9mm (5/16") K 9.5mm (3/8") W 11.1mm (7/16") L 12.7mm (1/2") M 15.9mm (5/8") N 19.1mm (3/4") P 22.2mm (7/8") Q 25.4mm (1") * Q0H R 28.6mm (1-1/8") * R0H mm (1-1/4") * H T 34.9mm (1-3/8") * T0H U 38.1mm (1-1/2") * U0H titch spec. G pec. common LH Needle gauge size Throat plate with thread trimmer Feed dog (with thread trimmer) Needle clamp asm. Presser foot asm. (tipdivided) 2.0mm 2.4mm (3/32") spec. 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") E 5.6mm (7/32") F 6.4mm (1/4") G 7.1mm (9/32") H 7.9mm (5/16") K 9.5mm (3/8") W 11.1mm (7/16") L 12.7mm (1/2") M 15.9mm (5/8") N 19.1mm (3/4") P 22.2mm (7/8") Q 25.4mm (1") R 28.6mm (1-1/8") mm (1-1/4") T 34.9mm (1-3/8") U 38.1mm (1-1/2") titch spec. G pec. common pec. common LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 9/12

35 LH-3178/ Needle gauge size ed slide asm. (with thread trimmer) Needle gauge size Front metal Inner metal ed slide asm. (left) ed slide asm. (right) ~ ~ ~ ~ W L N P Q U 2.4mm (3/32") ~ ~ ~ ~ 11.4mm (7/16") 12.7mm (1/2") 19.1mm (3/4") 22.2mm (7/8") 28.6mm (1-1/8") 31.8mm (1-1/4") 38.1mm (1-1/2") ~ ~ P Q U 2.4mm (3/32") ~ ~ 22.2mm (7/8") 25.4mm (1") 38.1mm (1-1/2") Chain-off thread gauge Needle gauge size Throat plate (without Feed dog (without thread trimmer) thread trimmer) Throat plate (with thread trimmer) Feed dog (with thread trimmer) Presser foot asm. Feed dog screw D F 4.8mm (3/16") 6.4mm (1/4") DH FE TP2 LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 10/12

36 LH-3188 Needle gauge size Throat plate Feed dog Presser foot asm. (tipdivided) mm 2 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") E 5.6mm (7/32") F 6.4mm (1/4") G 7.1mm (9/32") H 7.9mm (5/16") K 9.5mm (3/8") L 12.7mm (1/2") M 15.9mm (5/8") N 19.1mm (3/4") Q 25.4mm (1") titch spec. pec. common G LH Needle gauge size Throat plate with thread trimmer Feed dog (with thread trimmer) Needle clamp asm. Left Needle clamp asm. Right mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") DL DR E 5.6mm (7/32") EL ER F 6.4mm (1/4") FL FR G 7.1mm (9/32") GL GR H 7.9mm (5/16") HL HR K 9.5mm (3/8") KL KR L 12.7mm (1/2") LL LR M 15.9mm (5/8") N 19.1mm (3/4") Q 25.4mm (1") titch spec. pec. common pec. common G LH-3188/ Needle gauge size ed slide asm. (with thread trimmer) Needle gauge size Front metal Inner metal ed slide asm. (left) ed slide asm. (right) ~ ~ K L N Q 3.2mm (1/8") ~ ~ 9.5mm (3/8") 12.7mm (1/2") 19.1mm (3/4") 25.4mm (1") Chain-off thread gauge Needle gauge size Throat plate (without Feed dog (without thread trimmer) thread trimmer) ~ ~ P Q U Throat plate (with thread trimmer) 2.4mm (3/32") ~ ~ 22.2mm (7/8") 25.4mm (1") 38.1mm (1-1/2") Feed dog (with thread trimmer) Presser foot asm Feed dog screw D F 4.8mm (3/16") 6.4mm (1/4") DH TP FE LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 11/12

37 LH-3120 Needle gauge size Throat plate Feed dog Presser foot asm. Needle clamp asm. 2.4mm (3/32") 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") E 5.6mm (7/32") F 6.4mm (1/4") G 7.1mm (9/32") H 7.9mm (5/16") K 9.5mm (3/8") W 11.1mm (7/16") L 12.7mm (1/2") M 15.9mm (5/8") N 19.1mm (3/4") P 22.2mm (7/8") Q 25.4mm (1") R 28.6mm (1-1/8") 31.8mm (1-1/4") T 34.9mm (1-3/8") U 38.1mm (1-1/2") titch spec pec. common pec. common LH-3120 Needle gauge size ed slide asm. (with thread trimmer) Needle gauge size Front metal Inner metal ed slide asm. (left) ed slide asm. (right) ~ ~ W L N 2.4mm (3/32") ~ ~ 11.4mm (7/16") 12.7mm (1/2") 19.1mm (3/4") ~ P Q ~ U 2.4mm (3/32") ~ 22.2mm (7/8") 25.4mm (1") ~ 38.1mm (1-1/2") P ~ Q 22.2mm (7/8") ~ 28.6mm (1-1/8") LH-3128, , 3168, , 3178, , 3188, , 3120 (eptember, 2003) 12/12

38 2-needle, Needle-feed/ottom-feed, Lockstitch Machine (for foundation) LH-3126F Operating noise of the machine is dramatically reduced. The improved opener reduces the impact against the bobbin. y reducing variations of bobbin thread tension caused by the opener, irregular stitches are eliminated. The strokes of the right and left thread take-up are separately adjustable. The adjustment range of the needle thread tension is widened. The machine is equipped with a hook that uses a non-rotational bobbin. Height and inclination of the feed dog can be adjusted. Through a simple adjustment of the machine and replacement of the gauge, the feed method can be changed over between the needle-feed and bottom-feed types. PECIFICTION LH-3126F 2 Model name Max. sewing speed Max. stitch length Thread take-up Needle bar stroke Lift of the presser foot Hook (selectable) Needle (at the time of delivery) Feed system Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head LH-3126F 3,000rpm 4mm (normal/reverse feed) lide type 33.4mm y hand: 5.5mm, y knee: 12mm Vertical-axis hook (regular fold), specific latch hook or specific hook with non-rotational bobbin DP5 (#10) #9#11 Change-over between needle-feed/bottom-feed Fully automatic lubrication system by means of plunger pump JUKI New Defrix Oil No.2 (equivalent to IO VG32) 245mm 517mm178mm 43kg WHEN YOU PLCE ORDER Needle gauge 3.2mm (1/8") 4.8mm (3/16") 6.4mm (1/4") 7.1mm (9/32") 7.9mm (5/16") D F G H Feed Needle-feed ottom-feed For the "ottom-feed:," only the needle gauges, D, and F are applicable. utomatic reverse feed function Not provided Provided Refer to the combination availability table Hook Latch hook Hook with non-rotational bobbin C LH3126F ttachment throat plate, standard slide plate, standard presser foot Throat plate for tape-attachment, slide plate for tape-attachment, presser foot for tape-attachment utomatic reverse feed function 0 (not provided) (provided) 1 4 For the above category 4, select the feed category (needle-feed). Combination availability table Motor Where "0" is selected Where "1" is selected Where "0" is selected Where "1" is selected Clutch motor uto-lifter Not provided Pedal switch type(k89) C-800 EC-10 Z P For the K89, select the motor compatibility category 1 (C-800, C-910 or EC-10). Motor Compatible with clutch motor (without synchronizer and resistor pack) Compatible with C-800 and EC-10 (with built-in synchronizer and resistor pack) Refer to the combination availability table. 0 1 LH-3126F (eptember, 2003) 1/2

39 Gauges installed at the time of delivery D F G H Gauge size 3.2mm (1/8") 4.8mm (3/16") 6.4mm (1/4") 7.1mm (9/32") 7.9mm (5/16") Needle clamp Needle-feed gauges Throat plate Presser foot type For tape attachment type For tape attachment D F G H Feed dog (small pitch) D F G H With swivel guide With behind-theneedle-slot grooves D F Gauge size 3.2mm (1/8") 4.8mm (3/16") 6.4mm (1/4") Throat plate ottom-feed gauges Presser foot Feed dog Common gauges for needle-feed and bottom-feed lide plate (front) type For tape attachment Needle slot 2.0 ( gauge) 2.2 (D and F gauges) 1.7 ed with flat top surface Optional gauges D F G H Gauge size 3.2mm (1/8") 4.8mm (3/16") 6.4mm (1/4") 7.1mm (9/32") 7.9mm (5/16") Feed dog (large pitch) Throat plate D G00 Needle-feed gauges Rectangular feed Feed dog (small pitch) Feed dog (large pitch) Presser foot For light-weight materials Feed dog (large pitch) Feed dog (small pitch) With behind-theneedle-slot grooves With behind-theneedle-slot grooves With behind-theneedle-slot grooves Without behind-theneedle-slot grooves Without behind-theneedle-slot grooves D F G H Gauge size 3.2mm (1/8") 4.8mm (3/16") 6.4mm (1/4") 7.1mm (9/32") 7.9mm (5/16") Needle-feed gauges Throat plate For tape attachment Common gauges for needle-feed and bottom-feed lide plate (front) For tape attachment With tape inserting recess ll-thin type OPTION Model Part No. Description Feature V059 MV Tension-free feeder (tape feeder) The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation. T-36 Tape cutter The tape cutter is able to cut the tape just behind the presser foot (20mm away from the needle entry point). The cutter pressure is adjustable according to the material thickness utomatic reverse feed kit The automatic reverse feed function device can be mounted on the machine after the setup. This device can be installed on the back of the face plate. It is very convenient for frequent use Micro-lifter This device can be installed on the back of the face plate. It is very convenient for frequent use. LH-3126F (eptember, 2003) 2/2

40 2-needle, Needle-feed, Lockstitch Machine with utomatic Organized plit Needle ar Incorporating Corner Programming Device and utomatic Thread Trimmer LH LH (with large hooks) The automatic organized split needle bar releasing device automatically counts the number of stitches and releases the needle bar from the stop state. ince the operator only needs to press the switch once at the start of corner stitching, operator can concentrate on the handling of the material being sewn. This upgrades efficiency dramatically. To sew several corners of a material continuously, a series of corner stitching processes can be automatically performed by creating a sewing program which combines different types of corner stitching processes.* s many as eight different corner stitching processes and eight different patterns can be combined in a sewing program. * If your machine is equipped with JUKI s unique reverse function (pattern inverting function), as many as 16 different corner stitching processes can be combined. The machine is able to sew continuous obtuse-angle corners (gentle corners). ince the machine can perform same pattern sewing in repetition, it allows the operator to continuously sew gentle corners of a skirt (sewing in repetition) only by operating the knee switch. PECIFICTION LH /CP Model name pplication Max. sewing speed Max. stitch length Lift of the presser foot Hook Needle (at the time of delivery) Thread take-up Needle bar stroke Lubrication Lubricating oil Organized split needle bar Distance from needle to machine arm ed size Weight of the machine head Power requirement LH LH LH-3162G-7 LH-3182G-7 For light-weight materials For medium-weight materials For jeans and heavy-weight materials 3,000rpm 5mm (normal/reverse feed) y hand: 5.5mm, y knee: 12mm, y knee lifter with wiper: 9mm Vertical-axis regular hook (cap type) Vertical-axis doublecapacity hook (cap type) DP5 (#11) #11#14 DP5 (#14) #11#18 DP5 (#21) #18#22, For JE: 134 (Nm130) lide type 33.4mm Fully automatic lubrication system by means of plunger pump JUKI New Defrix Oil No.2 (equivalent to IO VG32) Provided as standard 245mm 517mm178mm 43Kg ingle-phase V, V, 3-phase V OPTION Model Part No. Description Feature K uto-lifter Compensation stitching switch Works effectively when you need to perform sewing while changing the (reverse feed control lever mounting type) stitch length of the compensation stitch (one stitch). E Compensation stitching switch (foot switch type) Works effectively when you want to control the compensation stitching (one stitch) by foot. Compensation stitching switch (reverse feed control lever mounting type) Compensation stitching switch (foot switch type) LH , (eptember, 2003) 1/2

41 WHEN YOU PLCE ORDER Type pplication Wiper and automatic reverse feed function uto-lifter Needle-feed with an organized split needle bar Needle-feed with an organized split needle bar and large hooks For light-weight materials For medium-weight materials For jeans and heavyweight materials G Wiper Not provided Provided utomatic reverse feed function Not provided Provided Not provided Provided 00 0 W0 W Not provided Pedal switch type (K89) Z LH31 7 Model name Needle gauge pec. mm inch 3.2 1/8 C 4.0 5/32 D 4.8 3/16 E 5.6 7/32 LH LH G G Gauges marked () are standard type. Please contact us for any gauge which is not included in the above table. F 6.4 1/4 G 7.1 9/32 H 7.9 5/16 K 9.5 3/8 L /2 M /8 N /4 Q Options Not provided With compensation stitching switch (reverse feed control lever mounting type) With compensation stitching switch (foot switch type) Z PC box/control panel/motor for C C804 H660 For General Export For CE For JU (L) ingle-phase 220V 3-phase 220V ingle-phase 230V ingle-phase 120V 3-phase 220V PC box PFL PFL PFL PFL PFL Japanese, English, Chinese English, German, French, panish, Italy Japanese, English, Chinese English, German, French, panish, Italy English, German, French, panish, Italy English, German, French, panish, Italy English, German, French, panish, Italy If an auto-lifter is installed on the machine, the presser foot will be lifted/lowered by the foot pedal. JU: North merica and Central and outh merica Control box (PK-70/-71 can be used for this feature) Pully belt 75: 39 inch (for LH-3100 series) Control panel CP-660 H 660 Corner stitching hand-operated switches Control panel CP-660 ervomotor/controller C-804 LH , (eptember, 2003) 2/2

42 Dry-head, High-speed, Overlock / afety titch Machine MO-6100D eries The needle bar, feed and looper mechanisms require no oiling. This means they do not splash oil, thereby leaving no oil stains on the sewing material, and thus contributing to upgraded quality. The driving section of the machine, except for the needle bar, feed and looper mechanisms is installed in a forced oiling block. This block is completely sealed to prevent the leakage of oil. tain-removing work or re-sewing work resulting from oil stains is eliminated. The machine does not need periodical oiling or used-oil disposal, which markedly improves maintainability. nti-material-slip type MO-6114D--30P, MO-6116D--30P The sewing machine is fully equipped with adjusting devices and provisions to effectively prevent puckering of difficult-to-sew materials or new-generation materials. The operator is able to produce beautifully finished high-quality seams without conducting difficult adjustments. MO-6114D 3 PECIFICTION Model name MO-6104D MO-6114D MO-6116D titch type 1-needle overlock 2-needle overlock afety stitching titch style in the U Max. sewing speed 6,000rpm titch length 0.84mm 1.54mm Needle gauge (mm) 2.0, , 3.2, 4.8 Overedging width (mm) 3.2, 4.0, , 3.2, 4.0, , 4.0, 4.8 ottom differential feed ratio For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6) Needle bar stroke 24.5mm (nti-material-slip type), 25.5mm (Upper looper extra high throw type) Inclination angle of the needle 20 Needle mechanism Needle bar method and upper/lower bushing Needle DC27 (excluding some subclass model) Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button Differential-feed adjusting method y lever (with micro-adjustment) Weight of the machine head 28kg Lubrication No lubrication Needle cooler Option Needle thread heat remover Option Micro-lifter Provided as standard UCL MCHINE LIT eams Model No. Materials of Number needles 1-needle overlock For runstitching in general fabric Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (rpm) MO-6104D-0D4-40H :0.71:2 7 DC27 #11 6,000 MO-6104D-0E4-40H :0.71:2 7 DC27 #11 6,000 MO-6104D-0D6-40H :0.71:2 7 DC27 #11 6,000 MH MO-6104D-0E6-40H :0.71:2 7 DC27 #11 6,000 MO-6104D-0F4-40H :0.71:2 7 DC27 #11 6,000 MO-6104D-0F6-40H :0.71:2 7 DC27 #11 6,000 Remarks Upper looper extra high throw type MO-6100D eries (eptember, 2003) 1/3

43 Remarks 2-needle overlock For runstitching in general fabric MO-6114D-D4-40H :0.71:2 6.5 DC27 #11 6,000 MO-6114D-D6-40H :0.71:2 6.5 DC27 #11 6,000 MH MO-6114D-E4-40H :0.71:2 6.5 DC27 #11 6,000 MO-6114D-E6-40H :0.71:2 6.5 DC27 #11 6,000 MO-6114D-6-30P :0.71:2 6.5 DC27 #11 6,000 MO-6114D-D6-30P LM :0.71:2 6.5 DC27 #11 6,000 MO-6114D-E6-30P :0.71:2 6.5 DC27 #11 6,000 MO-6114D-CF6-40H MH :0.71:2 6.5 DC27 #11 6,000 Upper looper extra high throw type nti-material-slip Upper looper extra high throw type For tape attaching G39: Tape attaching presser foot Q141: Tape guide MO-6114D-E6-44H/ G39/Q141 MH :0.71:2 6.5 DC27 #14 6,000 Upper looper extra high throw type afety stitching For runstitching in general fabric MO-6116D-DE4-40H :0.71:2 7 DC27 #11 6,000 MO-6116D-DE6-40H :0.71:2 7 DC27 #11 6,000 MO-6116D-DF4-40H MH :0.71:2 7 DC27 #11 6,000 MO-6116D-DF6-40H :0.71:2 7 DC27 #11 6,000 MO-6116D-FF6-40H :0.71:2 7 DC27 #11 6,000 MO-6116D-E4-30P :0.71:2 7 DC27 #11 6,000 MO-6116D-F4-30P :0.71:2 7 DC27 #11 6,000 MO-6116D-DD4-30P :0.71:2 7 DC27 #11 6,000 LM MO-6116D-DE4-30P :0.71:2 7 DC27 #11 6,000 MO-6116D-DF4-30P :0.71:2 7 DC27 #11 6,000 MO-6116D-FF4-30P :0.71:2 7 DC27 #11 6,000 Upper looper extra high throw type nti-material-slip WHEN YOU PLCE ORDER titch type U.. 1-needle overlock needle overlock needle safety stitch Type Dry-head D Device and attachment Tape attaching presser foot (for sewing sharp curves) / Tape guide G39/Q141 MO61 D / Needle Overedging gauge (mm) width (mm) Feed dog row 0D row 0D row 0E row 0E row 0F row 0F row row D row D row E row E row CF row DD row DE row DE row DF row DF row FF row FF6 Medium- to heavy-weight Light- to medium-weight Material pecific to knits such as sweaters pplication Runstitching Tape attaching pecial machine classification Upper looper extra high throw Upper looper extra high throw 40H 44H For general fabrics Runstitching nti-material-slip type 30P MO-6100D eries (eptember, 2003) 2/3

44 DEVIE ND TTCHMENT Model Part No. Description Chain-off thread trimming device T039 MT One-touch type tape cutter and chain-off thread For 110, 115,220, 240V MT trimming device (electromagnetic type) For 220, 380, 415, 440V T040 MT utomatic tape cutter For semisunken type For 110, 115,220, 240V + chain-off thread MT trimming device For 220, 380, 415, 440V MT (number-off-stitch For fullysunken type For 110, 115,220, 240V control and electromagnetic type) For 220, 380, 415, 440V MT T041 MT Pneumatic flat cutter T042 MT Pneumatic side cutter lower-type chain-off thread suction device MC-7 lower-type chain-off thread suction device + cloth chips Pneumatic chain-off thread suction device MC-4 pecific to chain-off thread, pedal-operated MC-5 pecific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. PF ir regulator (F.R. unit asm.) GMD Fixing screw for F.R. unit asm. F Tube connector (male) One-touch connector G election parts instead of the tube connector uto-lifter K25 GK Electromagnetic type K32 GK Pneumatic type (knee-operated) K49 GK Pneumatic type (pedal-operated) K52 GK Pneumatic type (with chain-off thread suction device) K65 GK Electromagnetic type K101 GK Pneumatic type (for servomotor) [Reference] Combination table of chain-off thread suction device and auto-lifer which correspond to chain-off thread trimming device. Chain-off thread trimming device T039 T040 T041 or T042 Chain-off thread suction device MC-7 MC-8 MC-9 MC-7 MC-5 MC-24 MC-7 MC-4 MC-8 MC-9 uto-lifter K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) K32 (any motor will do) K65 (Electronic-stop motor or C servomotor) K32 (any motor will do) K32 (any motor will do) K49 (Motors other than JUKI servomotors are applicable.) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K52 (any motor will do) K52 is equipped with chain-off thread suction device. K65 (Electronic-stop motor or C servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) 3 Model Part No. Description Feature Gathering device M M M M lind hemming device L121 ML lind stitch hemming attachment ruler used for blind hemming in knits ML utomatic foldededge controlled upper knife For 220, 380, 415, 440V For flat For 110, 115,220, 240V ML L122 ML blind hemming For square For 110, 115,220, 240V ML device upper knife For 220, 380, 415, 440V L123 ML pring-type folded-edge controlled bottom hemming device Piping folder M056 MM-0560J00 Piping folder This piping folder makes a piping first, then turns up the tape. M075 MM-0750J00 Piping folder (to be used with knit tape) This attachment can be used for both cotton bias tape with gimp and knit tape. The operation mode can be changed over with a fingertip control. M076 MM-0760N00 Ready-made piping folder The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm. M077 MM-0770M00 Piping folder for gathering The attachment makes gathers on the lower fabric while making decorative piping. Guide, Ruler H153 MH Cloth edge guide ruler (for overlock machine) H154 MH Cloth edge guide ruler (for safety stitch machine) Q141 MQ Tape guide 084D M D Pattern guide Feller, inder Miscellaneous wing-type gathering device (interlocked with pedal / for safety stitch machine) wing-type gathering device (interlocked with pedal / for overlock machine) wing-type gathering device (manual-lever operated / for safety stitch machine) wing-type gathering device (manual-lever operated / for overlock machine) swing type edge guide. K006 MK Upturn feller This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate. N067 MN-0670D00 Reinforcement tape attachment binder This binder binds the edge of a pocket bag while cutting round its periphery. N077 MN Clean finish top and bottom This binder runstitches a pocket bag and binding its periphery with tape simultaneously. Z173 MZ acklatch device (for 1-needle overlock machine) Needle cooler unit asm P crew Needle cooler unit asm P crew Presser ilicon tank asm Felt T R0 Rubber plug M P crew For overlock machine For safety stitch machine The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers. The attachment is used to perform two different processes, joining fabric process and gathering process, at a time. The attachment can be opened/closed by using the lever (manually operated). The differential-feed ratio is controlled with the knee lever. The attachment automatically detects the overlapped section of a material. Then, it makes the needle enter the material deeper to prevent stitch deviation. When the overlapped section of a material is reached, the blind hemming guide will move sufficiently to prevent stitch deviation. This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less. This attachment is used for overedging a sleeve bottom placket with a sharp curve. It enables the machine to smoothly sew the curved section of a sleeve bottom placket along with the guide pin of the presser foot. It sews chain-off thread at the start of sewing inside overedged seam. With this device, the operator is no longer required to neatly arrange the chain-off thread. Rolled-in chain-off thread also works as a simplified bartack. Needle cooler y silicon oil lubricationg unit for the needle thread. Needle thread heat remover y silicon oil lubricating unit for the needle thread. MO-6100D eries (eptember, 2003) 3/3

45 High-speed, overlock / safety stitch machine MO-6700 eries ince the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 7,000rpm. The machine incorporates various mechanisms as standard, such as a differential-feed micro-adjustment mechanism and an external adjustment mechanism for adjusting the feed dog inclination as well as increasing the differential feed ratio, which can be easily adjusted to finish seams that perfectly match the material to be used. PECIFICTION MO Model name MO-6704 MO-6714 MO-6716 titch type 1-needle overlock 2-needle overlock afety stitching titch style in the U Max. sewing speed 7,000rpm titch length 0.84mm 1.54mm Needle gauge (mm) 2.0, 2.4, , 3.2, 4.0, 4.8, Overedging width (mm) 1.6, 3.2, 4.0, , 4.0, , 4.0, 4.8, 6.4 Differential feed ratio For gathering 1:2(Max. 1:4), For stretching 1:0.7(Max. 1:0.6) Needle bar stroke 24.5mm Inclination angle of the needle 20 Needle mechanism Needle bar method and upper/lower bushing Needle DC27 (excluding some subclass model) Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button Differential-feed adjusting method y lever (with micro-adjustment) Weight of the machine head 28kg Lubrication utomatic Lubricating oil JUKI Machine Oil 18 (equivalent to IO VG18) Needle cooler Option Needle thread heat remover Option Micro-lifter Provided as standard UCL MCHINE LIT eams Model No. Materials of Number needles Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (rpm) Remarks 1-needle overlock For runstitching in general fabric MO D :0.71:2 7 DC27 #11 7,000 MO E :0.71:2 7 DC27 #11 7,000 MO F :0.71:2 7 DC27 #11 7,000 MO D :0.71:2 7 DC27 #11 7,000 MO F6-300 LM :0.71:2 7 DC27 #11 7,000 MO D4-3F :0.71:2 7 DC27 #11 7,000 MO E4-3F :0.71:2 7 DC27 #11 7,000 MO D6-3F :0.71:2 7 DC27 #11 7,000 MO D4-3F :0.71:2 7 DC27 #11 7,000 For soft-chains MO-6700 eries (eptember, 2003) 1/4

46 Remarks For soft-chains MO E4-4FH :0.71:2 7 DC27 #11 7,000 Upper looper extra high throw type MO E4-40H :0.71:2 7 DC27 #11 7,000 MO F4-40H MH :0.71:2 7 DC27 #11 7,000 MO E6-40H :0.71:2 7 DC27 #11 7,000 MO F :0.71:2 7 DC27 #14 7,000 MO F6-50H :0.71:2 7 DC27 #14 7,000 Upper looper extra high throw type Upper looper extra high throw type For blind hemming L121: lind stitch hemming attachment MO D4-210/ L121 MO E4-41H/ L121 LM :0.71:2 5.5 DC27 #9 7,000 MH :0.71:2 5.5 DC27 #9 7,000 Upper looper extra high throw type For rolled hemming (folded downward) MO :0.71:2 5 DC1 #8 7,000 ELL MO :0.71:2 5 DC1 #8 7,000 2-needle overlock For runstitching in general fabric MO-6714-D :0.71:2 6.5 DC27 #11 7,000 MO-6714-E :0.71:2 6.5 DC27 #11 7,000 MO-6714-D6-307 LM :0.71:2 6.5 DC27 #11 7,000 MO-6714-E :0.71:2 6.5 DC27 #11 7,000 MO-6714-E6-20H :0.71:2 6.5 DC27 #11 7,000 MO-6714-E4-40H :0.71:2 6.5 DC27 #11 7,000 MO-6714-E6-40H :0.71:2 6.5 DC27 #11 7,000 MO-6712-CE4-40H MH :0.71:2 6.5 DC27 #11 7,000 MO-6712-DF :0.71:2 6.5 DC27 #14 7,000 MO-6712-DF6-50F :0.71:2 6.5 DC27 #14 7,000 Upper looper extra high throw type For imitation safety-stitching For gathering 162: wing-type gathering device (manual-lever operated) MO-6714-E6-327/ 162 LM :0.91:2.6 6 DC27 #11 7,000 For tape attaching G02, G39: Tape attaching presser foot Q141: Tape guide MO-6714-E6-44H/ G39/Q141 MO-6714-E7-44H/ G02/Q141 MH :0.91:2.6 7 DC27 #14 7, :0.91:2.6 7 DC27 #14 7,000 Upper looper extra high throw type afety stitching For runstitching in general fabric MO-6716-DD :0.71:2 7 DC27 #11 7,000 MO-6716-DD6-3F :0.71:2 7 DC27 #11 7,000 For soft-chains MO-6716-DE4-300 LM :0.71:2 7 DC27 #11 7,000 MO-6716-DE :0.71:2 7 DC27 #11 7,000 MO-6716-FF :0.71:2 7 DC27 #11 7,000 MO-6716-E4-40H :0.71:2 7 DC27 #11 7,000 MO-6716-DE4-40H :0.71:2 7 DC27 #11 7,000 MO-6716-DE6-40H :0.71:2 7 DC27 #11 7,000 MO-6716-FF6-40H :0.71:2 7 DC27 #11 7,000 MH MO-6716-DD :0.71:2 7 DC27 #16 7,000 MO-6716-FF :0.71:2 7 DC27 #16 7,000 MO-6716-FF6-50H :0.71:2 6.5 DC27 #16 7,000 MO-6716-FH6-50H :0.71:2 6.5 DC27 #16 7,000 MO-6716-FF6-60H :0.91:1.7 5 DC27 #21 7,000 H MO-6716-FH6-60H :0.91:1.7 5 DC27 #21 7,000 Upper looper extra high throw type Upper looper extra high throw type For jeans Upper looper extra high throw type MO-6700 eries (eptember, 2003) 2/4

47 Remarks For gathering 159: wing-type gathering device (interlocked with pedal) 161: wing-type gathering device (manual-lever operated) MO-6716-FF6-42H/ :0.91:2.6 6 DC27 #14 7, MH MO-6716-DE4-42H/ :0.91:2.6 6 DC27 #11 7, For rolling-in tape N077: Clean finish top and bottom Upper looper extra high throw type 3 MO-6745-ED4-360/ N077 2-needle type for LM :0.71:2 5 DC27 #14 7,000 double-chainstitch on pocket bags 3-needle safety stitching MO D6-40H 3 6 MH MO D6-40H :0.71:2 6.5 DC27 #11 7, :0.71:2 6.5 DC27 #11 7,000 Upper looper extra high throw type WHEN YOU PLCE ORDER titch type U.. Type Device and attachment 1-needle overlock Tape attaching presser foot / Tape guide G02/Q141 1-needle overlock for blind hemming needle imitation safety stitch needle overlock needle safety stitch Tape attaching presser foot (for sewing sharp curves)/ Tape guide lind stitch hemming attachment wing-type gathering device (interlocked with pedal / for safety stitch machine) wing-type gathering device (manual-lever operated / for safety stitch machine) G39/Q141 L needle safety stitch 43 2-needle double chain stitch 45 wing-type gathering device (manual-lever operated / for overlock machine) Clean finish top and bottom 162 N077 MO67 / Needle Overedging gauge (mm) width (mm) Feed dog row row row 0D row 0D row 0E row 0E row 0F row 0F row D row D row E row E row E row CE row DD row DE row DE row DF row ED row FF row FH row 1D row 2D6 Extra light- to light-weight Light- to medium-weight Light- to medium-weight Medium- to heavy-weight Material Light-weight materials such as men's shirts pecific to knits For general fabrics pecific to knits such as sweaters Medium- to heavy-weight materials such as denim For heavy-weight materials pplication pecial machine classification Rolled hemming 150 Runstitching Upper looper extra high throw 20H lind hemming 210 Runstitching 300 Runstitching Upper looper high throw 307 Gathering Upper looper high throw 327 Rolling-in tape 360 oft-chain 3F0 oft-chain Throat plate and feed dog both provided with a lip 3F6 Runstitching Upper looper extra high throw 40H lind hemming Upper looper extra high throw 41H Gathering Upper looper extra high throw 42H Tape attaching Upper looper extra high throw 44H oft-chain Upper looper extra high throw 4FH Runstitching 500 Runstitching Upper looper high throw 507 Runstitching wim suits 50F Runstitching Upper looper extra high throw 50H Runstitching Upper looper extra high throw 60H MO-6700 eries (eptember, 2003) 3/4

48 DEVIE ND TTCHMENT Model Part No. Description Chain-off thread trimming device T039 MT One-touch type tape cutter and chain-off thread For 110, 115,220, 240V MT trimming device (electromagnetic type) For 220, 380, 415, 440V T040 MT utomatic tape cutter For semisunken type For 110, 115,220, 240V + chain-off thread MT trimming device For 220, 380, 415, 440V MT (number-off-stitch For fullysunken type For 110, 115,220, 240V control and electromagnetic type) For 220, 380, 415, 440V MT T041 MT Pneumatic flat cutter T042 MT Pneumatic side cutter lower-type chain-off thread suction device MC-7 lower-type chain-off thread suction device + cloth chips Pneumatic chain-off thread suction device MC-4 pecific to chain-off thread, pedal-operated MC-5 pecific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. PF ir regulator (F.R. unit asm.) GMD Fixing screw for F.R. unit asm. F Tube connector (male) One-touch connector G election parts instead of the tube connector uto-lifter K25 GK Electromagnetic type K32 GK Pneumatic type (knee-operated) K49 GK Pneumatic type (pedal-operated) K52 GK Pneumatic type (with chain-off thread suction device) K65 GK Electromagnetic type K101 GK Pneumatic type (for servomotor) [Reference] Combination table of chain-off thread suction device and auto-lifer which correspond to chain-off thread trimming device. Chain-off thread trimming device T039 T040 T041 or T042 Chain-off thread suction device MC-7 MC-8 MC-9 MC-7 MC-5 MC-24 MC-7 MC-4 MC-8 MC-9 uto-lifter K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) K32 (any motor will do) K65 (Electronic-stop motor or C servomotor) K32 (any motor will do) K32 (any motor will do) K49 (Motors other than JUKI servomotors are applicable.) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K52 (any motor will do) K52 is equipped with chain-off thread suction device. K65 (Electronic-stop motor or C servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) Model Part No. Description Feature Gathering device M M MO-6700 eries (eptember, 2003) 4/4 wing-type gathering device (interlocked with pedal / for safety stitch machine) wing-type gathering device (interlocked with pedal / for overlock machine) wing-type gathering device (manual-lever operated / for safety stitch machine) wing-type gathering device (manual-lever operated / for overlock machine) This attachment is used for overedging a sleeve bottom placket with a sharp curve. 084D M D Pattern guide It enables the machine to smoothly sew the curved section of a sleeve bottom placket along with the guide pin of the presser foot. Feller, inder K006 MK Upturn feller This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate. N067 MN-0670D00 Reinforcement tape attachment binder This binder binds the edge of a pocket bag while cutting round its periphery. N077 MN Clean finish top and bottom This binder runstitches a pocket bag and binding its periphery with tape simultaneously. Z173 MZ acklatch device (for 1-needle overlock machine) Needle cooler unit asm P crew WP D Washer For overlock machine P crew Needle cooler unit asm P crew For safety stitsch machine WP D Washer Presser ilicon tank asm Felt T R0 Rubber plug M P crew The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers. 161 M The attachment is used to perform two different processes, joining fabric process and gathering process, at a time. 162 M The attachment can be opened/closed by using the lever (manually operated). The differential-feed ratio is controlled with the knee lever. lind hemming device L121 ML lind stitch hemming attachment ruler used for blind hemming in knits ML utomatic foldededge controlled upper knife For 220, 380, 415, 440V The attachment automatically detects the overlapped section of a material. For flat For 110, 115,220, 240V ML L122 ML blind hemming For square For 110, 115,220, 240V Then, it makes the needle enter the material deeper to prevent stitch deviation. ML device upper knife For 220, 380, 415, 440V L123 ML pring-type folded-edge controlled bottom hemming device When the overlapped section of a material is reached, the blind hemming guide will move sufficiently to prevent stitch deviation. Piping folder M056 MM-0560J00 Piping folder This piping folder makes a piping first, then turns up the tape. M075 MM-0750J00 Piping folder (to be used with knit tape) This attachment can be used for both cotton bias tape with gimp and knit tape. The operation mode can be changed over with a fingertip control. M076 MM-0760N00 Ready-made piping folder The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm. M077 MM-0770M00 Piping folder for gathering The attachment makes gathers on the lower fabric while making decorative piping. Guide, Ruler H153 MH Cloth edge guide ruler (for overlock machine) H154 MH Cloth edge guide ruler (for safety stitch machine) swing type edge guide. Q141 MQ Tape guide Miscellaneous This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less. It sews chain-off thread at the start of sewing inside overedged seam. With this device, the operator is no longer required to neatly arrange the chain-off thread. Rolled-in chain-off thread also works as a simplified bartack. Needle cooler y silicon oil lubricationg unit for the needle thread. Needle thread heat remover y silicon oil lubricating unit for the needle thread.

49 uper-high-speed, Overlock / afety titch Machine MO-6900 eries ince the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to offer upgraded responsiveness from light- to heavy-weight materials with a lower applied tension, it achieves well-tensed soft-feeling seams that flexibly correspond to the elasticity of the material at the maximum sewing speed of 8,000 to 8,500rpm. To offer improved sewing capabilities as well as to prevent stitching misshapes, the machine is equipped as standard with the needle thread heat remover and needle cooler. 3 PECIFICTION MO-6914 Model name MO-6904 MO-6914 MO-6916 titch type 1-needle overlock 2-needle overlock afety stitching titch style in the U Max. sewing speed 8,500rpm 8,000rpm 8,000rpm titch length 0.84mm 1.54mm Needle gauge (mm) 2.0, 2.4, , 3.2, 4.0, 4.8, Overedging width (mm) 1.6, 3.2, 4.0, , 4.0, , 4.0, 4.8, 6.4 Differential feed ratio For gathering 1:2(Max. 1:4), For stretching 1:0.7(Max. 1:0.6) Needle bar stroke 24.5mm Inclination angle of the needle 20 Needle bar bushing Upper/lower bushing method Needle DC27(excluding some subclass model) Max. lift of the presser foot 7mm(excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button Differential-feed adjusting method y lever (with micro-adjustment) Weight of the machine head 28kg Lubrication utomatic Lubricating oil JUKI Machine Oil 18 (equivalent to IO VG18) Needle cooler Provided as standard (excluding MO-6945) Needle thread heat remover Provided as standard (excluding MO-6945) Micro-lifter Provided as standard UCL MCHINE LIT eams Model No. Materials of Number needles 1-needle overlock For runstitching in general fabric Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (rpm) MO D :0.71:2 7 DC27 #11 8,500 MO E :0.71:2 7 DC27 #11 8,500 MO F :0.71:2 7 DC27 #11 8,000 MO D :0.71:2 7 DC27 #11 8,500 MO E :0.71:2 7 DC27 #11 8,500 LM MO F :0.71:2 7 DC27 #11 8,000 MO D4-3F :0.71:2 7 DC27 #11 8,500 MO E4-3F :0.71:2 7 DC27 #11 8,500 MO D6-3F :0.71:2 7 DC27 #11 8,500 MO D4-3F :0.71:2 7 DC27 #11 8,500 Remarks For soft-chains MO-6900 eries (eptember, 2003) 1/4

50 Remarks For soft-chains MO E4-4FH :0.71:2 7 DC27 #11 7,500 Upper looper extra high throw type MO E4-40H :0.71:2 7 DC27 #11 7,500 MO E6-40H MH :0.71:2 7 DC27 #11 7,500 MO F :0.71:2 7 DC27 #14 8,000 MO F6-50H :0.71:2 7 DC27 #14 7,500 Upper looper extra high throw type Upper looper extra high throw type For blind hemming L121: lind stitch hemming attachment MO D4-210/ L121 MO E4-41H/ L121 MH :0.71:2 5.5 DC27 9 7, :0.71:2 5.5 DC27 #9 7,500 Upper looper extra high throw type For rolled hemming (folded downward) MO :0.71:2 5 DC1 #8 8,500 ELL MO :0.71:2 5 DC1 #8 8,500 2-needle overlock For runstitching in general fabric MO-6914-D :0.71:2 6.5 DC27 #11 8,000 MO-6914-E :0.71:2 6.5 DC27 #11 8,000 MO-6914-D6-307 LM :0.71:2 6.5 DC27 #11 8,000 MO-6914-E :0.71:2 6.5 DC27 #11 8,000 MO-6914-E6-20H :0.71:2 6.5 DC27 #11 7,500 MO-6914-E4-40H :0.71:2 6.5 DC27 #11 7,500 MO-6914-E6-40H :0.71:2 6.5 DC27 #11 7,500 MO-6912-CE4-40H MH :0.71:2 6.5 DC27 #11 7,500 MO-6912-DF :0.71:2 6.5 DC27 #14 7,500 MO-6912-DF6-50F :0.71:2 6.5 DC27 #14 7,500 Upper looper extra high throw type For imitation safety-stitching For gathering 162: wing-type gathering device (manual-lever operated) MO-6914-E6-327/ 162 LM :0.91:2.6 6 DC27 #11 7,000 For tape attaching G02, G39: Tape attaching presser foot Q141: Tape guide MO-6914-E6-44H/ G39/Q141 MO-6914-E7-44H/ G02/Q141 MH :0.91:2.6 7 DC27 #14 7, :0.91:2.6 7 DC27 #14 7,000 Upper looper extra high throw type afety stitching For runstitching in general fabric MO-6916-DD :0.71:2 7 DC27 #11 8,000 MO-6916-DD6-3F :0.71:2 7 DC27 #11 8,000 For soft-chains MO-6916-DE4-300 LM :0.71:2 7 DC27 #11 8,000 MO-6916-DE :0.71:2 7 DC27 #11 8,000 MO-6916-FF :0.71:2 7 DC27 #11 8,000 MO-6916-E4-40H :0.71:2 7 DC27 #11 7,500 MO-6916-DE4-40H :0.71:2 7 DC27 #11 7,500 MO-6916-DE6-40H :0.71:2 7 DC27 #11 7,500 MO-6916-FF6-40H :0.71:2 7 DC27 #11 7,500 MO-6916-DD6-500 MH :0.71:2 7 DC27 #16 8,000 MO-6916-FF :0.71:2 7 DC27 #16 8,000 MO-6916-DF6-50H :0.71:2 6.5 DC27 #16 7,500 MO-6916-FF6-50H :0.71:2 6.5 DC27 #16 7,500 MO-6916-FH6-50H :0.71:2 6.5 DC27 #16 7,500 MO-6916-FF6-60H :0.91:1.7 5 DC27 #21 7,000 H MO-6916-FH6-60H :0.91:1.7 5 DC27 #21 7,000 Upper looper extra high throw type Upper looper extra high throw type For jeans Upper looper extra high throw type MO-6900 eries (eptember, 2003) 2/4

51 Remarks For gathering 159: wing-type gathering device (interlocked with pedal) 161: wing-type gathering device (manual-lever operated) MO-6916-FF6-42H/ 159 MO-6916-DE4-42H/ 161 For rolling-in tape N077: Clean finish top and bottom MO-6945-ED4-360/ N077 3-needle safety stitching MH MO D6-40H 3 6 MO D6-50H :0.91:2.6 6 DC27 #14 7, :0.91:2.6 6 DC27 #11 7,000 Upper looper extra high throw type 2-needle type for LM :0.71:2 5 DC27 #14 7,000 double-chainstitch on pocket bags MH :0.71:2 6.5 DC27 #11 7, :0.71:2 6.5 DC27 #11 7,500 Upper looper extra high throw type 3 WHEN YOU PLCE ORDER titch type U.. 1-needle overlock needle overlock for blind hemming needle imitation safety stitch needle overlock needle safety stitch needle safety stitch 43 2-needle double chain stitch 45 Type Device and attachment Tape attaching presser foot / Tape guide Tape attaching presser foot (for sewing sharp curves)/ Tape guide lind stitch hemming attachment wing-type gathering device (interlocked with pedal / for safety stitch machine) wing-type gathering device (manual-lever operated / for safety stitch machine) wing-type gathering device (manual-lever operated / for overlock machine) Clean finish top and bottom G02/Q141 G39/Q141 L N077 MO69 / Needle Overedging gauge (mm) width (mm) Feed dog row row row 0D row 0D row 0E row 0E row 0F row 0F row D row D row E row E row E row CE row DD row DE row DE row DF row ED row FF row FH row 1D6 Extra light- to light-weight Light- to medium-weight Light- to medium-weight Medium- to heavy-weight Material Light-weight materials such as men's shirts pecific to knits For general fabrics pecific to knits such as sweaters Medium- to heavy-weight materials such as denim For heavy-weight materials pplication pecial machine classification Rolled hemming 150 Runstitching Upper looper extra high throw 20H Runstitching 300 Runstitching Upper looper high throw 307 Gathering Upper looper high throw 327 Rolling-in tape 360 oft-chain 3F0 oft-chain Throat plate and feed dog both provided with a lip 3F6 Runstitching Upper looper extra high throw 40H lind hemming Upper looper extra high throw 41H Gathering Upper looper extra high throw 42H Tape attaching Upper looper extra high throw 44H oft-chain Upper looper extra high throw 4FH Runstitching 500 Runstitching Upper looper high throw 507 Runstitching wim suits 50F Runstitching Upper looper extra high throw 50H Runstitching Upper looper extra high throw 60H C ERVOMOTOR (C-380)/Machine head MO69 /K101/Y35 Pneumatic auto-lifter type K101 For the machine provided with T040 K32 Only the pneumatic auto-lifter is prepared for the MO-6900 series. uilt-in synchronizer et speed MO ,000rpm MO-6914, ,500rpm Y35 elect a sewing speed that is lower than the machine head's maximum sewing speed by 500rpm. MO-6900 eries (eptember, 2003) 3/4

52 DEVIE ND TTCHMENT Model Part No. Description Chain-off thread trimming device T039 MT One-touch type tape cutter and chain-off thread trimming device MT (electromagnetic type) T040 MT utomatic tape cutter For semisunken type + chain-off thread MT trimming device MT (number-off-stitch For fullysunken control and electro- MT type magnetic type) T041 MT Pneumatic flat cutter T042 MT Pneumatic side cutter For 110, 115, 220, 240V For 220, 380, 415, 440V For 110, 115, 220, 240V For 220, 380, 415, 440V For 110, 115, 220, 240V For 220, 380, 415, 440V lower-type chain-off thread suction device MC-7 lower-type chain-off thread suction device + cloth chips Pneumatic chain-off thread suction device MC-4 pecific to chain-off thread, pedal-operated MC-5 pecific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. PF ir regulator (F.R. unit asm.) GMD Fixing screw for F.R. unit asm. F Tube connector (male) G One-touch connector election parts instead of the tube connector uto-lifter K25 GK Electromagnetic type K32 GK Pneumatic type (knee-operated) K49 GK Pneumatic type (pedal-operated) K52 GK Pneumatic type (with chain-off thread suction device) K65 GK Electromagnetic type K101 GK Pneumatic type (for servomotor) [Reference] Combination table of chain-off thread suction device and auto-lifer which correspond to chain-off thread trimming device. Chain-off thread trimming device T039 T040 T041 or T042 Chain-off thread suction device MC-7 MC-8 MC-9 MC-7 MC-5 MC-24 MC-7 MC-4 MC-8 MC-9 uto-lifter K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) K32 (any motor will do) K65 (Electronic-stop motor or C servomotor) K32 (any motor will do) K32 (any motor will do) K49 (Motors other than JUKI servomotors are applicable.) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K52 (any motor will do) K52 is equipped with chain-off thread suction device. K65 (Electronic-stop motor or C servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) Model Part No. Description Feature Gathering device M M M M lind hemming device L121 ML lind stitch hemming attachment ruler used for blind hemming in knits ML utomatic foldededge controlled upper knife For 220, 380, 415, 440V For flat For 110, 115, 220, 240V ML L122 ML blind hemming For square For 110, 115, 220, 240V ML device upper knife For 220, 380, 415, 440V L123 ML pring-type folded-edge controlled bottom hemming device Piping folder M056 MM-0560J00 Piping folder This piping folder makes a piping first, then turns up the tape. M075 MM-0750J00 Piping folder (to be used with knit tape) This attachment can be used for both cotton bias tape with gimp and knit tape. The operation mode can be changed over with a fingertip control. M076 MM-0760N00 Ready-made piping folder The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm. M077 MM-0770M00 Piping folder for gathering The attachment makes gathers on the lower fabric while making decorative piping. Guide, Ruler H153 MH Cloth edge guide ruler (for overlock machine) H154 MH Cloth edge guide ruler (for safety stitch machine) Q141 MQ Tape guide 084D M D Pattern guide Feller, inder K006 MK Upturn feller This feller is exclusively used with the 3C0 throat plate. It is attached on the throat plate. N067 MN-0670D00 Reinforcement tape attachment binder This binder binds the edge of a pocket bag while cutting round its periphery. N077 MN Clean finish top and bottom This binder runstitches a pocket bag and binding its periphery with tape simultaneously. Miscellaneous MO-6900 eries (eptember, 2003) 4/4 wing-type gathering device (interlocked with pedal / for safety stitch machine) wing-type gathering device (interlocked with pedal / for overlock machine) wing-type gathering device (manual-lever operated / for safety stitch machine) wing-type gathering device (manual-lever operated / for overlock machine) Z173 MZ acklatch device (for 1-needle overlock machine) The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers. The attachment is used to perform two different processes, joining fabric process and gathering process, at a time. The attachment can be opened/closed by using the lever (manually operated). The differential-feed ratio is controlled with the knee lever. The attachment automatically detects the overlapped section of a material. Then, it makes the needle enter the material deeper to prevent stitch deviation. When the overlapped section of a material is reached, the blind hemming guide will move sufficiently to prevent stitch deviation. swing type edge guide. This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less. This attachment is used for overedging a sleeve bottom placket with a sharp curve. It enables the machine to smoothly sew the curved section of a sleeve bottom placket along with the guide pin of the presser foot. It sews chain-off thread at the start of sewing inside overedged seam. With this device, the operator is no longer required to neatly arrange the chainoff thread. Rolled-in chain-off thread also works as a simplified bartack.

53 High-speed, Variable Top-feed, Overlock / afety titch Machine MO-6900R eries The MO-6900R eries comes with a newly-developed feed mechanism that moves the top and bottom feeds separately. With the combination of the feed's increased differential feed ratio and improved feeding capacity, the machine is able not only to prevent uneven material feed, but also to easily finish difficult processes, such as sewing different types of materials together, ruffling and piping. The locus of the top feed dog increases the surfaces of the top feed dog that horizontally synchronize with the bottom feed dog, to reliably feed the materials without damaging them. The feed mechanism smoothly feeds light-weight materials softly or feeds heavy-weight materials with an increased cloth-biting force. The fulcrum of the top feed locus can be set at the best-suited position according to the material or process. MO-6914R 3 PECIFICTION Model name MO-6904R MO-6914R MO-6916R titch type 1-needle overlock 2-needle overlock afety stitching titch style in the U Max. sewing speed 7,000rpm (Longitudinal stroke of top feed dog is 6mm or less) 6,000rpm (Longitudinal stroke of top feed dog is 68.5mm) titch length 0.84mm 1.54mm Needle gauge (mm) , 4.8, Overedging width (mm) 3.2, 4.0, 4.8, , , 4.0, 4.8, 6.4 ottom differential feed ratio For gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6) Needle bar stroke 24.5mm Inclination angle of the needle 20 Needle mechanism Needle bar method and upper/lower bushing Needle DC27 (excluding some subclass model) Vertical stroke of top feed dog mm (It differs with the machine s specifications.) Longitudinal stroke of top feed dog 17.5mm (It differs with the machine s specifications.) Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button ottom differential feed adjusting method Top differential feed adjusting method Weight of the machine head Lubrication Lubricating oil Needle cooler Needle thread heat remover Micro-lifter y lever (with micro-adjustment) y lever (with micro-adjustment) 29kg utomatic JUKI Machine Oil 18 (equivalent to IO VG18) Provided as standard Provided as standard Provided as standard UCL MCHINE LIT eams Model No. Materials 1-needle overlock For runstitching in general fabric Number of needles Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Longitudinal stroke of top-feed dog (mm) MO-6904R-0D4-3F :0.71: DC27 #11 7,000 For soft-chains LM MO-6904R-0E :0.71: DC27 #11 7,000 MO-6904R-0F :0.71: DC27 #14 7,000 MH MO-6904R-0H4-50M :0.71: DC27 #16 7,000 For zipper attaching Presser lifting amount (mm) Needle system Max. sewing speed (rpm) Remarks MO-6900R eries (eptember, 2003) 1/3

54 Remarks 2-needle overlock For runstitching in general fabric MO-6914R-D :0.71: DC27 #11 7,000 MO-6914R-D6-307 LM :0.71: DC27 #11 7,000 MO-6914R-E :0.71: DC27 #11 7,000 MO-6914R-D6-40H :0.71: DC27 #11 7,000 MH MO-6914R-E6-40H :0.71: DC27 #11 7,000 Upper looper extra high throw type afety stitching For runstitching in general fabric MO-6916R-DD :0.71: DC27 #11 7,000 MO-6916R-DE :0.71: DC27 #11 7,000 LM MO-6916R-DE :0.71: DC27 #11 7,000 MO-6916R-FF :0.71: DC27 #11 7,000 MO-6916R-FF6-50H :0.71: DC27 #16 7,000 MH MO-6916R-FH6-60H :0.91: DC27 #21 7,000 3-needle safety stitching Multi-purpose runstitching Upper looper extra high throw type For jeans Upper looper extra high throw type MO-6943R-1D6-307 LM :0.71: DC27 #11 7,000 WHEN YOU PLCE ORDER titch type U.. 1-needle overlock needle overlock needle safety stitch needle safety stitch 43 Type Variable top-feed R MO69 R Needle Overedging gauge (mm) width (mm) Feed dog row 0D row 0E row 0F row 0H row D row D row E row DD row DE row DE row FF row FH row 1D6 Light- to medium-weight Medium- to heavy-weight Material For general fabrics pecific to knits such as sweaters Medium- to heavy-weight materials such as denim For heavy-weight materials pplication pecial machine classification Runstitching 300 Runstitching Upper looper high throw 307 oft-chain Throat plate and feed dog both provided with a lip 3F6 Runstitching Upper looper extra high throw 40H Runstitching 500 Runstitching Upper looper extra high throw 50H Runstitching For zipper attaching 50M Runstitching Upper looper extra high throw 60H C ERVOMOTOR (C-380)/Machine head MO69 R /K101/Y35 Pneumatic auto-lifter type For the machine provided with T040 K101 K32 Only the pneumatic auto-lifter is prepared for the MO-6900R series. uilt-in synchronizer et speed 6,500rpm Y35 elect a sewing speed that is lower than the machine head's maximum sewing speed by 500rpm. MO-6900R eries (eptember, 2003) 2/3

55 DEVIE ND TTCHMENT Model Part No. Description Chain-off thread trimming device T039 MT One-touch type tape cutter and chain-off thread For 110, 115, 220, 240V MT trimming device (electromagnetic type) For 220, 380, 415, 440V T040 MT utomatic tape cutter For semisunken type For 110, 115, 220, 240V + chain-off thread MT trimming device For 220, 380, 415, 440V MT (number-off-stitch For fullysunken type For 110, 115, 220, 240V control and electromagnetic type) For 220, 380, 415, 440V MT T041 MT Pneumatic flat cutter T045 MT Pneumatic side cutter lower-type chain-off thread suction device MC-7 lower-type chain-off thread suction device + cloth chips Pneumatic chain-off thread suction device MC-4 pecific to chain-off thread, pedal-operated MC-5 pecific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter MC-24 Pneumatic chain-off thread + cloth chips The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. PF ir regulator (F.R. unit asm.) GMD Fixing screw for F.R. unit asm. F Tube connector (male) uto-lifter G One-touch connector election parts instead of the tube connector K25 GK Electromagnetic type K32 GK Pneumatic type (knee-operated) K49 GK Pneumatic type (pedal-operated) K52 GK Pneumatic type (with chain-off thread suction device) K65 GK Electromagnetic type K101 GK Pneumatic type (for servomotor) [Reference] Combination table of chain-off thread suction device and auto-lifer which correspond to chain-off thread trimming device. Chain-off thread trimming device T039 T040 T041 or T045 Chain-off thread suction device MC-7 MC-8 MC-9 MC-7 MC-5 MC-24 MC-7 MC-8 MC-9 uto-lifter K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) K32 (any motor will do) K65 (Electronic-stop motor or C servomotor) K32 (any motor will do) K32 (any motor will do) K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) K52 (any motor will do) K52 is equipped with chain-off thread suction device. K65 (Electronic-stop motor or C servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) 3 Model Part No. Description Feature Gathering device 167 M wing-type upper-cloth gathering device (interlocked with pedal) The attachment opens with the presser foot pedal. This facilitates material setting on the machine. Furthermore, knee-control type differential-feed adjusting device is built in the attachment. It controls a differential-feed ratio as desired, thereby enabling the operator to make beautiful gathers. lind hemming device L121 ML lind stitch hemming attachment ruler used for blind hemming in knits ML For 110, 115, 220, 240V utomatic foldededge controlled For flat ML upper knife For 220, 380, 415, 440V The attachment automatically detects the overlapped section of a material. L122 ML blind hemming For square For 110, 115, 220, 240V Then, it makes the needle enter the material deeper to prevent stitch deviation. ML device upper knife For 220, 380, 415, 440V L123 ML pring-type folded-edge controlled bottom hemming device Piping folder M056 MM-0560J00 Piping folder This piping folder makes a piping first, then turns up the tape. M075 MM-0750J00 Piping folder (to be used with knit tape) This attachment can be used for both cotton bias tape with gimp and knit tape. The operation mode can be changed over with a fingertip control. M076 MM-0760N00 Ready-made piping folder The dimension of ready-made tapes can be adjusted within the range of 8 to 13mm. M077 MM-0770M00 Piping folder for gathering The attachment makes gathers on the lower fabric while making decorative piping. M222 MM-2220M00 MM-2220J00 Piping folder upper-cloth gathering (finished width 12mm, tape width 26mm) Piping folder upper-cloth gathering (finished width 9mm, tape width 20mm) M224 MM-2240N00 Ready-made piping folder for upper-cloth gathering Guide, Ruler H153 MH Cloth edge guide ruler (for overlock machine) H154 MH Cloth edge guide ruler (for safety stitch machine) Q141 MQ Tape guide When the overlapped section of a material is reached, the blind hemming guide will move sufficiently to prevent stitch deviation. This folder is to be used together with upper-cloth gathering device 167. Gimp size that can be used is 2 to 2.5mm. This folder is to be used together with upper-cloth gathering device 167. Tape, of which width is 8 to 18mm, can be used. swing type edge guide. This attachment is used attached on the machine head (face plate). It is used for tapes with the width of 7mm or less. MO-6900R eries (eptember, 2003) 3/3

56 uper-high-speed, Cylinder-bed, Overlock Machine MO-6900C eries The cylinder-bed is bestsuited to the runstitching and blind hemming of tubular materials. ince the machine comes with a needle-thread take-up mechanism as well as a looper thread take-up mechanism, to enable sewing with a lower tension applied to the material, it achieves soft-feeling highquality seams. ince the machine is provided as standard with the bottom feed dog inclination-adjusting mechanism and the external differential feedincreasing mechanism, it can be easily adjusted to ideally match the material being sewn. In addition, the machine is provided as standard with a micro lifter feature that offers improved responsiveness to materials, and provides the operator with upgraded operability. The stitch length can be easily adjusted with the push-button mounted on the front surface of the sewing machine. PECIFICTION Model name MO-6904C MO-6914C titch type 1-needle overlock 2-needle overlock titch style in the U Max. sewing speed 8,000rpm titch length mm Needle gauge (mm) 2.0 Overedging width (mm) 3.2, 4.0, , 4.0 Differential feed ratio For gathering 1:2.3(Max. 1:4.5), For stretching 1:0.8 Needle bar stroke 24.5mm Inclination angle of the needle 20 Needle mechanism Needle bar method and upper/lower bushing Needle DC27 Max. lift of the presser foot 7mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button Differential-feed adjusting method y lever Weight of the machine head 24kg Lubrication utomatic Lubricating oil JUKI Machine Oil 18(equivalent to IO VG18) Needle cooler Provided as standard Needle thread heat remover Provided as standard Micro-lifter Provided as standard MO-6914C 3 UCL MCHINE LIT eams Model No. Materials of Number needles Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Presser lifting amount (mm) Needle system Max. sewing speed (rpm) Remarks 1-needle overlock MO-6904C-0D :0.81:2.3 7 DC27 #11 8,000 MO-6904C-0E6-307 LM :0.81:2.3 7 DC27 #11 8,000 MO-6904C-0F :0.81:2.3 7 DC27 #14 8,000 Upper looper extra high throw type 2-needle overlock MO-6914C-D :0.81: DC27 #11 8,000 MO-6914C-D6-307 LM :0.81: DC27 #11 8,000 MO-6914C-E :0.81: DC27 #11 8,000 Upper looper extra high throw type MO-6900C eries (eptember, 2003) 1/2

57 DEVIE ND TTCHMENT Model Part No. Description Chain-off thread trimming device T043 MT Pneumatic side cutter lower-type chain-off thread suction device MC-7 lower-type chain-off thread suction device + cloth chips Pneumatic chain-off thread suction device MC-38 Pneumatic chain-off thread + cloth chips MC-39 Function of MC-8 + auto-lifter The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. PF ir regulator (F.R. unit asm.) GMD Fixing screw for F.R. unit asm. F Tube connector (male) uto-lifter G One-touch connector election parts instead of the tube connector K93 GK Pneumatic type (knee-operated) K94 GK Pneumatic type (with chain-off thread suction device) K102 GK Pneumatic type (for servomotor) [Reference] Combination table of chain-off thread suction device and auto-lifer which correspond to chain-off thread trimming device. Chain-off thread trimming device T043 Chain-off thread suction device MC-7 MC-38 MC-39 uto-lifter K102 (JUKI servomotor) K94 (any motor will do) K94 is equipped with chain-off thread suction device. K102 (JUKI servomotor) (MC-39 is equipped with auto-lifter.) Model Part No. Description Feature lind hemming device L124 ML lind stitch hemming attachment ruler used for blind hemming in knits ML utomatic foldededge controlled upper knife For 220, 380, 415, 440V The attachment automatically detects the overlapped section of a material. For flat For 110, 115, 220, 240V ML L125 ML blind hemming For square For 110, 115, 220, 240V Then, it makes the needle enter the material deeper to prevent stitch deviation. ML device upper knife For 220, 380, 415, 440V Cloth tensioner TR01 mall-diameter roller for rib attaching TR02 Large-diameter cloth tensioner Ruler, Miscellaneous H153 MH Cloth edge guide ruler swing type edge guide Cloth plate Wider material can be sewn by attaching the cloth plate. WHEN YOU PLCE ORDER Light- to medium-weight Material pplication pecial machine classification For general fabrics Runstitching Upper looper high throw 307 MO69 C titch type U.. 1-needle overlock needle overlock Type Cylinder-bed C Needle Overedging gauge (mm) width (mm) Feed dog row 0D row 0E row 0F row D row D row E6 C ERVOMOTOR (C-380)/Machine head MO69 C /K102/Y35 Pneumatic auto-lifter type K102 uilt-in synchronizer et speed 7,500rpm Y35 MO-6900C eries (eptember, 2003) 2/2

58 ottom-feed, Overlock / afety titch Machine for Extra heavy-weight materials MO-6900G eries The machine incorporates a mechanism and parts that are optimum for the sewing of extra heavy-weight materials, such as an extra high-lift type upper looper, tractor foot and coarse type feed dog. It demonstrates an excellent performance ability in the sewing of various kinds of heavy-weight materials such as jeans, raised fabric materials, mats and carpets. The machine securely clamps the material at the beginning of sewing as well as smoothly sewing multi-layered parts of the material to facilitate the sewing of extra heavy-weight materials. 3 MO-6916G PECIFICTION Model name MO-6904G MO-6914G MO-6916G titch type 1-needle overlock 2-needle overlock afety stitching titch style in the U Max. sewing speed 6,000rpm titch length 2.55mm 2.54mm 2.55mm Needle gauge (mm) Overedging width (mm) 4.8, 10.0, , 6.4 Differential feed ratio For gathering 1:1.75 (Max. 1:3.8) For gathering 1:2 (Max. 1:3.8) For gathering 1:1.75 (Max. 1:3.8) For stretching 1:0.6 For stretching 1:0.7 (Max. 1:0.6) For stretching 1:0.6 Needle bar stroke 28.8mm Inclination angle of the needle 20 Needle bar bushing Upper/lower bushing method Needle DO5 (excluding some subclass model) Max. lift of the presser foot 8mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button Differential-feed adjusting method y lever (with micro-adjustment) Weight of the machine head 28kg Lubrication utomatic Lubricating oil JUKI Machine Oil 18 (equivalent to IO VG18) Needle cooler Provided as standard (excluding some subclass model) Needle thread heat remover Provided as standard Micro-lifter Provided as standard UCL MCHINE LIT Model No. Materials Number of needles Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Longitudinal stroke of top-feed dog (mm) Presser lifting amount (mm) Needle system Max. sewing speed (rpm) Remarks MO-6903G-0N6-3D1 LM :0.61: DO5 #16 5,500 For splicing fabrics MO-6904G-0F :0.61: DO5 #21 6,000 For runstitching extra heavy- weight materials such as denim MO-6905G-0M :0.61: DC1 #24 4,000 MO-6905G-0M6-7E0 EH For overedging carpets, mats for entrance halls, etc :0.61: DC1 #24 4,000 For overedging car mats MO-6914G-CH :0.71:2 8 DO5 #18 6,000 For overedging jersey, etc. MO-6916G-FF :0.61: DO5 #21 6,000 MO-6916G-FH :0.61: DO5 #21 6,000 For safety stitching extra heavy-weight materials such as denim MO-6900G eries (eptember, 2003) 1/2

59 WHEN YOU PLCE ORDER MO69 G titch type U.. For splicing fabrics needle overlock For overedging carpets needle overlock needle safety stitch Type Extra heavy-weight materials G Needle Overedging Feed dog gauge (mm) width (mm) row 0N row 0F row 0M row CH row FF6 Remarks For splicing fabrics For extra heavy-weight materials (jeans, car mats etc.) For car mats 3D E row FH6 MO-6900G eries (eptember, 2003) 2/2

60 Variable Top-feed, Overlock / afety titch Machine for Extra heavy-weight materials MO-6900J eries The machine incorporates a mechanism and parts that are optimum for the sewing of extra heavy-weight materials, such as an extra high-lift type upper looper, tractor foot and coarse type feed dog. It demonstrates an excellent performance ability in the sewing of various kinds of heavy-weight materials such as jeans, raised fabric materials, mats and carpets. The MO-6900J eries comes with a newly-developed feed mechanism that moves the top and bottom feeds separately. With its improved feeding capacity and stronger cloth-biting force, the feed mechanism prevents uneven material feed when sewing extra heavyweight materials. 3 MO-6916J PECIFICTION Model name MO-6904J MO-6914J MO-6916J titch type 1-needle overlock 2-needle overlock afety stitching titch style in the U Max. sewing speed 6,000rpm titch length 2.55mm 2.54mm 2.55mm Needle gauge (mm) Overedging width (mm) , 6.4 ottom differential feed ratio For gathering 1:1.75 (Max. 1:3.8) For gathering 1:2 (Max. 1:3.8) For gathering 1:1.75 (Max. 1:3.8) For stretching 1:0.6 For stretching 1:0.7 (Max. 1:0.6) For stretching 1:0.6 Needle bar stroke 28.8mm Inclination angle of the needle 20 Needle bar bushing Upper/lower bushing method Needle DO5 (excluding some subclass model) Vertical stroke of top feed dog 8.5mm Longitudinal stroke of top feed dog 2.77mm (It differs with the machine's specifications.) Max. lift of the presser foot 8mm (excluding some subclass model) Max. presser foot pressure 63.7N (6.5kg) titch adjusting method y push-button ottom differential feed adjusting method Top differential feed adjusting method Weight of the machine head Lubrication Lubricating oil Needle cooler Needle thread heat remover Micro-lifter y lever (with micro-adjustment) y lever (with micro-adjustment) 29kg utomatic JUKI Machine Oil 18 (equivalent to IO VG18) Provided as standard Provided as standard Provided as standard UCL MCHINE LIT Model No. Materials Number of needles Number of threads Needle gauge (mm) Overedging width (mm) Number of feed dog rows titch length (mm) ottom differentialfeed ratio Longitudinal stroke of top-feed dog (mm) Presser lifting amount (mm) Needle system Max. sewing speed (rpm) Remarks MO-6904J-0F :0.61: DO5 #21 6,000 For runstitching extra heavy- weight materials such as denim MO-6914J-CH6-700 EH :0.71: DO5 #18 6,000 For overedging jersey, etc. MO-6916J-FF :0.61: DO5 #21 6,000 For safety stitching MO-6916J-FH :0.61: DO5 #21 6,000 extra heavy-weight materials such as denim MO-6916J-FF6-70Q :0.71: DC27 #16 6,000 For safety stitching bathrobe, etc. MO-6900J eries (eptember, 2003) 1/2

61 DEVIE ND TTCHMENT Model Part No. Description Chain-off thread trimming device T039 T040 T048 T050 MT MT MT MT MT MT One-touch type tape cutter and chainoff thread trimming device (electromagnetic type) utomatic tape cutter + chain-off thread trimming device (number-off-stitch control and electromagnetic type) lower-type chain-off thread suction device For semisunken type For fullysunken type For 110, 115, 220, 240V For 220, 380, 415, 440V For 110, 115, 220, 240V For 220, 380, 415, 440V For 110, 115, 220, 240V For 220, 380, 415, 440V MO- MO- 6900G 6900J MT Pneumatic flat cutter (for overlock stitch machine) MT MT Pneumatic side cutter (for safety stitch machine) MT MC-7 lower-type chain-off thread suction device + cloth chips [Reference] Combination table of chain-off thread suction device and auto-lifer which correspond to chain-off thread trimming device. Chain-off thread trimming device T039 T040 Chain-off thread suction device MC-7 MC-8 MC-9 MC-7 MC-5 MC-24 uto-lifter K101 (JUKI servomotor) K101 (JUKI servomotor) (MC-9 is equipped with auto-lifter.) K32 (any motor will do) K32 (any motor will do) K32 (any motor will do) Pneumatic chain-off thread suction device MC-4 pecific to chain-off thread, pedal-operated MC-5 pecific to chain-off thread MC-8 Pneumatic chain-off thread + cloth chips MC-9 Function of MC-8 + auto-lifter T048 or T050 MC-7 MC-8 K101 (JUKI servomotor) K101 (JUKI servomotor) K52 (any motor will do) K52 is equipped with chain-off thread suction device. MC-24 Pneumatic chain-off thread + cloth chips The aforementioned devices are not equipped with air regulator. Please purchase the following components when you need to regulate air pressure. MC-9 (MC-9 is equipped with auto-lifter.) PF ir regulator (F.R. unit asm.) GMD Fixing screw for F.R. unit asm. F Tube connector (male) G One-touch connector election parts instead of the tube connector uto-lifter K32 GK Pneumatic type (knee-operated) K49 GK Pneumatic type (pedal-operated) K52 GK Pneumatic type (with chain-off thread suction device) K101 GK Pneumatic type (for servomotor) WHEN YOU PLCE ORDER MO69 J titch type U.. 1-needle overlock needle overlock needle safety stitch Type Variable top-feed for extra heavy-weight materials G Needle Overedging Feed dog gauge (mm) width (mm) row 0F row CH row FF row FH6 Remarks For extra heavy-weight materials 700 (jeans, car mats etc.) For extra heavy-weight 70Q materials (bathrobe etc.) MO-6900J eries (eptember, 2003) 2/2

62 Overlock Machine with emi-automatic acklatch Device [1-needle] MO-604-0E6-300/L-3 [2-needle] MO-614-E4-307/L-4 Variable Top-feed Overlock Machine with emi-automatic acklatch Device [1-needle] MO-6904R-0E6-300/L-3 [2-needle] MO-6914R-E4-307/L-4 3 ided by the precise control of the stitch number provided by the material-edge sensor and C-380 motor/controller, the tension-release mechanism is activated during production of chain-off thread at both the start and end of sewing so that thin chain-off thread can be produced. The chain-off thread is completely tucked into the finished seam on the material to achieve a beautifully finished sewing product. For the 2-needle overlock machine, the throat plate intermediate claw automatically moves backward at the end of sewing so that the chain-off thread can be guided to the needle thread retainer without getting caught by the claw. t the start of the next sewing, the chain-off thread is rolled into the stitches to the material edge, giving the seam a beautiful finish. For both 1-needle and 2-needle overlock machines, the tension-release function can be disabled by setting the material edge sensor in the OFF state. In addition, for 2-needle machines, the intermediate claw of the throat plate can be fixed with projected. This means that the machine can be used as a standard machine with standard specifications for processes not requiring the backlatching capability such as continuous stitching and runstitching, thereby saving on new equipment. WHEN YOU PLCE ORDER Overlock Machine (1-needle) MO6 040E6300/L3 PC box PECIFICTION MO-6914-E4-307/L-4 Throat plate intermediate claw backward Throat plate intermediate claw forward/backward mechanism (for 2-needle machines) uto-lifter Provided as standard Compressed air 0.5 MPa (5kgf/F) For specifications not listed above, refer to the respective model catalogs. C (2-needle) Model MO MO MO6 14E4307/L4 PC box For General Export ingle-phase V 07 3-phase V 11 For JU (L) ingle-phase V 37 3-phase V 38 For CE ingle-phase V 34 Model MO MO Variable Top-feed Overlock Machine (1-needle) (2-needle) MO6904R0E6300/L3 MO6914RE4307/L4 Motor for C M PC box For General Export ingle-phase 3-phase V 60 For JU (L) ingle-phase V 61 3-phase V 62 For CE ingle-phase V 63 JU: North merica and Central and outh merica. L-3, L-4 (eptember, 2003) 1/1

63 Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag titching Machine LZ-2290 eries It comes in two different models, one with standard specifications and the other with an anti-material slip capability. For both models, there are two subclass models, i.e., the "minute-quantity lubrication type" and the "dry-head type", which eliminates oil stains on sewing products. You may select the best-suited model from the diversified subclasses according to your applications. The machine is also provided with a newly-developed operation panel, the IP-100. With this operation panel, you can easily establish settings for stitch shapes and stitches, as well as conduct setup changing, thereby achieving further increased availability. The machine is provided as standard with fourteen different basic zigzag stitching patterns grouped into eight different types. You can choose the zigzag stitching pattern you want directly on the operation panel (IP-100) of the machine body. The zigzag width, needle throw position and number of blind stitches can also be easily adjusted on the operation panel. PECIFICTION LZ W 4 Model name Type Machine head type Dry-head type Minute-quantity lubrication type Max. sewing speed Without automatic thread trimmer With automatic thread trimmer Max. zigzag width Needle throw mechanism Max. feeding amount Lift of the presser foot Hook Thread take-up Needle (at the time of delivery) Number of patterns for standard stitching Custom pattern Internal memory memory capacity Extended memory Max. number of stitches Continuous stitching pattern Input function of the main unit obbin thread winder Machine head drive Lubrication Lubricating oil Distance from needle to machine arm ed size Power requirement/ Power consumption Total weight LZ-2290-D LZ-2290-DU LZ LZ-2290-U LZ-2290-D-7 LZ-2290-DU-7 LZ LZ-2290-U-7 nti-material-slip capability type nti-material-slip capability type 4,000rpm 5,000rpm 4,500rpm (for standard zigzag stitching, the zigzag width (for standard zigzag stitching, the zigzag width has to be set to 5mm or less.) has to be set to 4mm or less.) 10mm (in increments of 0.1mm) Computer-controlled 5.0mm 2.5mm 5.0mm 2.5mm tepless fine adjustment Exclusive no-lubricating hook (plastic hook with special-purpose race surface) No lubrication y hand: 5.5mm/y knee: 10mm Rotary type CHMETZ438(#75), ORGN DP5(#10) 8 types/14 patterns Max. 20 patterns Max. 999 patterns 500 stitches/pattern Max. 10 patterns, 20 step, 500 stitches/step Provided as standard (operation panel) uilt-in machine head Compact C servomotor (direct-drive system) 300mm 517mm178mm DP hook (with titanium-treated inner hook) Minute-quantity lubrication to needlebar and hook (no oil pan system) JUKI New Defrix Oil No.1 (equivalent to IO VG7) ingle-phase V, V, 3-phase V/Power rating 600V 98kg (for the model without automatic thread trimmer) 100kg (for the model with automatic thread trimmer) LZ-2290 eries (eptember, 2003) 1/4

64 WHEN YOU PLCE ORDER Without automatic thread trimmer With automatic thread trimmer Machine head type Dry-head D Type nti-material-slip type U Machine head type Dry-head D Type nti-material-slip type U LZ2290 LZ Push-button-type reverse feed switch Provided Not provided For LZ-2290-U (anti-material-slip capability), select "Not provided." 0 Wiper/Push-button-type reverse feed switch Wiper Push-button-type reverse feed switch Provided Provided W Device/ttachment uto-lifter (pedal-driven) Not provided K121 PC box/operation panel for C C915 IP100 PC box For JU ingle-phase V PFL C For JU, General Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box Operation panel IP-100 IP100 EWING PTTERN Name of pattern traight stitch zigzag 2-step zigzag callop (left) callop (right) lind 3-step zigzag Equalwidtwidth Equal- Equalwidtwidth Equal- stitch Crescent Crescent (left) lind stitch (right) Custom pattern titch pattern Number of stitches α Max. 500 OPTION Model Part No. Description Features utomatic reverse feed kit Optional switch kit K121 GK uto-lifter (pedal-driven) D H00 Presser bar Presser foot connecting components D H00 Presser connecting rod (Replaceable presser bar) The aforementioned parts are used when a lockstitching type presser foot is installed on the machine Presser foot connecting foot Presser foot connecting P crew components Hard-point hook The blade point of this hook prevents abrasion Hook The hook with non-rotational bobbin eliminates sewing troubles obbin caseasm. Hook with resulting from bobbin idling. It provides a uniform bobbin non-rotational bobbin thread tension at all times, thereby guaranteeing a consistent obbin stitch formation. The amount of tape to be fed can be adjusted in accordance V059 MV Tension-free feeder (Tape feeder) with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation. 189 M Pneumatic type pplies tension to desired portions of the tape fed from tensionfree tape puller. The device is started/stopped by operating the Elastic tape tensing device knee switch. This increases operator productivity without 189 M olenoid type interrupting the sewing work. LZ-2290 eries (eptember, 2003) 2/4 When this device is installed, the LZ-2290-(without automatic thread trimmer) can perform reverse feed operation. (The mirroring switch for scallop stitching is used as the pushbutton-type reverse feed switch.) This handy switch is used to control various functionsit is most effective when operating the machine in a standing position. (Needle up/down correction, 1-stitch correction, reversestitch correction, auto lifter and thread trimmer, etc.)

65 LIT OF THE MJOR GUGE Max. zigzag width / Max. feed pitch Throat plate Feed dog Presser foot (with finger guard) Remarks With a recess on the reverse side of the presser foot Max. feed amount: 2mm 4 Max. feed amount: 2mm Light-in-weight type Max. feed amount: 2mm Light-in-weight type with the front fulcrum Max. feed amount: 2mm Max. 2 Max. feed amount: 2mm (at the time of delivery) Light-in-weight type Front fulcrum type uited to sewing tasks that require frequent changes in the needle throw position. (at the time of delivery) Max. feed amount: 2mm (at the time of delivery: dry-head type) Max. feed amount: 2mm Light-in-weight type Light -in-weight presser foot prevents jumping at the time of high-speed sewing. Max. feed amount: 1.3mm (at the time of delivery) Max. feed amount: 5mm Max Presser foot with tape guide Light-in-weight type Max. feed amount: 2.5mm Light-in-weight type with the front fulcrum Max. feed amount: 1.6mm LZ-2290 eries (eptember, 2003) 3/4

66 Max. zigzag width / Max. feed pitch Throat plate Feed dog Presser foot (with finger guard) Remarks Light-in-weight type Max. feed amount: 1.3mm For standard zigzag stitching Max. feed amount: 2.5mm Light-in-weight type Max. feed amount: 2.5mm Max. feed amount: 5mm Max. feed amount: 2.5mm Max. feed amount: 5mm Light-in-weight type Max. feed amount: 2.5mm Max. feed amount: 5mm Light-in-weight type Light-in-weight type with the front fulcrum For attaching tape to brassieres, etc. Light-in-weight type Max. feed is 5 mm for the LZ-2290-(-7). ince the max. feed is 2.5 mm for the LZ-2290-U(-7), gauges have to be selected with care. In addition to the above-listed ones, many different gauges and attachments for zigzag stitching are available. Please contact us for details. LZ-2290 eries (eptember, 2003) 4/4

67 High-speed, 1-needle, Lockstitch, Zigzag titching Machine LZ-2280N ERIE The hook driving shaft offset mechanism assures trouble-free and consistent zigzag stitching. The market-proven hook and thread take-up lever enables sewing with upgraded consistency with a lower tension applied to the thread. Greater durability is secured by preventing the hook from heating up when the machine is running at high speeds. The highly reliable machine head is structured to reduce operating noise and prevent oil leakage. The machine ensures easy adjustment of zigzag width and feed pitch. The adjustable range of the feed mechanisms has been widened, thereby upgrading the machine's responsiveness to materials. LZ-2284N-7-W/CP LZ-2280N (standard zigzag) The standard zigzag stitching machine creates softly finished seams. The needle rocking mechanism is provided with a triangular cam which helps produce beautiful seams with consistency. LZ-2281N (standard wider zigzag) Two kinds of gauges can be selected in accordance with the application of the machine: an -type gauge with a zigzag width of 5mm, and a -type gauge with a zigzag width of 8mm. The needle rocking cam is provided with a triangular cam which helps produce beautiful seams with consistency. LZ-2282N (standard zigzag/with lower knife) (standard zigzag/with lower knife and automatic thread trimmer) LZ-2282N-7 The machine incorporates a built-in lower knife that trims only the lower material. This allows the machine to simultaneously attach lace to the body of the foundation and trim only the body during processes to attach lace to the bottoms or tops of slips or to the joint seam lines of shorts. LZ-2284N LZ-2284N-7 (with standard/3-step zigzag stitching pattern changeover function) (with standard/3-step zigzag stitching pattern changeover function and automatic thread trimmer) The operator can easily switch the needle-throwing pattern between the standard and 3-step zigzag stitching patterns using the lever located in the free space under the arm. (Time required: pprox. 15 sec) When changing the sewing product or design, there's no need to adjust the sewing machine head or machine layout. LZ-2286N (3-step zigzag) The maximum needle throw is 10mm. The needle rocking mechanism means a higher degree of accuracy, thereby leading to a very high performance. LZ-2288N (with changeable pattern cams) The machine is able to perform eleven different kinds of zigzag stitching only by a quick procedure to replace the cams. LZ-2285N (fagoting) The pressure of the fagoting holder can be separately adjusted by the left- and right-hand sections in order to prevent an uneven material feed. High-speed, 1-needle, Lockstitch, Zigzag titching Machine with anti-material-slip capability LZ-2280NU (standard zigzag) (with standard/3-step zigzag stitching pattern LZ-2284NU changeover function) (with standard/3-step zigzag stitching pattern changeover function and automatic thread trimmer) LZ-2284NU-7 With its newly developed feed mechanism, the machine prevents uneven feed of the upper and lower cloths when sewing girdles and body suits made of slippery, elastic materials. Drop-feed sewing machines have been widely said to feed in the lower cloth more quickly than the upper cloth. However, this machine prevents uneven feed between the upper and lower cloths in spite of its a drop-feed mechanism. In appearances, the gauge parts are identical to those of a conventional zigzag stitching machine, and operability is in no way affected by the newly developed feed mechanism. LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (eptember, 2003) 1/6

68 PECIFICTION Model name Without automatic thread trimmer With automatic thread trimmer LZ-2280N LZ-2281N LZ-2282N LZ-2282N-7 LZ-2284N LZ-2284N-7 LZ-2286N LZ-2288N LZ-2285N titch system zigzag wider zigzag zigzag (with lower knife) / 3-step zigzag 3-step zigzag With changeable pattern cams Fagoting titch pattern Refer to the specifications for pattern cam Max. sewing speed 5,500rpm 5,000rpm 4,000rpm Max. zigzag width (mm) Max. feeding amount (mm) Min. cutting allowance of lower knife (mm) Lower knife driving method Lift of the presser foot (mm) Hook Thread take-up Lubrication Lubricating oil Needle (at the time of delivery) Needle position changing mechanism Reverse feed stitching mechanism Needle throw direction change-over mechanism Needle throw pattern cam Number of pattern cams specified ( type) 8.0 ( type) 2.5 ( type) 5.0 ( type) y hand: 5.5, y knee: C motor 5.0 (standard) 10.0 (3-step) 2.5 (standard) 2.0 (3-step) y hand: 4.0 y hand: 5.5, y knee: 10.0 y knee: 8.5 DP hook (with titanium-treated inner hook) Rotary type Fully automatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) CHMETZ 438UK (Nm75), ORGN DP5 (#10) Provided as standard Provided as standard Triangular cam Grooved cam 8.0 (standard:6.0) 2.5 Provided as standard y hand: 5.5 y knee: 8.0 CHMETZ 438UK (#80) 11 nti-material-slip type Model name titch system Without automatic thread trimmer With automatic thread trimmer LZ-2288N: electable from five different cams; zigzag stitching cam, 3-step zigzag stitching cam, 2-step zigzag stitching cam, standard scalloping cam, crescent scalloping cam. Other cams are optionally available. LZ-2280NU LZ-2284NU LZ-2284NU-7 Max. sewing speed 4,500rpm LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (eptember, 2003) 2/6

69 WHEN YOU PLCE ORDER LZ-2280N series (without automatic thread trimmer) LZ228 Type utomatic reverse feed function zigzag zigzag/with anti-material-slip capability wider zigzag (with a gauge for 5mm zigzag width) wider zigzag (with a gauge for 8mm zigzag width) 0N 0NU 1N 1N Provided 0 Not provided LZ-2284NT, -2286NT and -2285N are not classified by the automatic reverse feed function. 4 zigzag/with lower knife 2N With standard/3-step zigzag stitching pattern changeover function 4N With standard/3-step zigzag stitching pattern changeover function and anti-material-slip capability 4NU With standard/3-step zigzag stitching pattern changeover function and with tape attaching foot capability 4NT 3-step zigzag 6N 3-step zigzag/with tape attaching foot 6NT With changeable pattern cams/ zigzag 8N With changeable pattern cams/3-step zigzag 8N With changeable pattern cams/2-step zigzag 8NC With changeable pattern cams/ scalloping 8ND With changeable pattern cams/crescent scalloping 8NE Fagoting 5N LZ-2280N-7 series (with automatic thread trimmer) LZ228 7 Type Wiper and automatic reverse feed function uto-lifter zigzag (anti-material-slip type) /3-step zigzag /3-step zigzag (anti-material-slip type) 2N 4N 4NU Wiper Not provided Provided utomatic reverse feed function Not provided Provided Not provided Provided 00 0 W0 W Provided (K83) Not provided K PC box C910 PC box For JU (L) ingle-phase V PFL For JU, General Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box Motor for C M91 Operation panel Operation panel IP-100 IP100 Pulley belt CP-160 CP160 LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (eptember, 2003) 3/6

70 OPTION Model Part No. Description Feature V D H00 Presser bar D H00 Presser connecting rod P crew MV utomatic reverse feed kit Non-lubricated hook (plastic hook with special race surface) Hard-point hook Hook obbin case asm. obbin Tension-free feeder (tape feeder) Presser foot connecting components Hook with nonrotational bobbin This device allows a machine without thread trimmer to perform automatic reverse feed function. The aforementioned parts are used when a lockstitching type presser foot is installed on the machine. The hook effectively prevents oil stains. When the hook is used, setscrews are required for the front of the hook-driving shaft (Part No.: ). The blade point of this hook prevents abrasion. The hook with a non-rotational bobbin eliminates sewing troubles resulting from bobbin idling. It provides a uniform bobbin thread tension at all times, thereby guaranteeing a consistent stitch formation. The amount of tape to be fed can be adjusted in accordance with the sewing speed of the machine. It is adaptable to processes for attaching reinforcement tape, attaching elastic tape or lace to foundation M M Elastic tape tensing device pplies tension to desired portions of the tape fed from tension-free tape puller. The device is started/stopped by operating the knee switch. This increases operator productivity without interrupting the sewing work. RF-1 Pedal-operated reverse feed stitching device The device enables the operator to perform reverse feed stitching using the pedal without using the right hand. (excluding the LZ-2285N) LZ-2288N PECIFICTION OF PTTERN CM Name of pattern zigzag 3-step zigzag 2-step zigzag scallop Crescent scallop Equal-width scallop Equal-width scallop lind stitch lind stitch lind stitch lind stitch Part No Part name Max. zigzag width (mm) Max. pattern width (mm) Number of stitches Pattern cam Pattern cam Pattern cam C Pattern cam D Pattern cam E Pattern cam F Pattern cam G Pattern cam H Pattern cam J Pattern cam K Pattern cam L Right Right Right Right Right Right Right Right titch pattern Left Left Left Left Left Left Left Left For standard zigzag stitching and blind stitching, set the zigzag width to 5mm or less when the machine runs at a sewing speed of 4,200rpm or more. LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (eptember, 2003) 4/6

71 LIT OF THE MJOR GUGE Max. zigzag width/ Max. feed pitch Throat plate Feed dog Presser foot (with finger guard) Remarks With a recess on the reverse side of the presser foot Max. feed amount: 2mm Max. feed amount: 2mm Light-in-weight type Max. feed amount: 2mm Light-in-weight type with the front fulcrum Max. feed amount: 2mm Max Max. feed amount: 2mm Light-in-weight type Front fulcrum type uited to sewing tasks that require frequent changes in the needle throw position Max. feed amount: 2mm Max. feed amount: 1.3mm Light-in-weight type Light -in-weight presser foot prevents jumping at the time of high-speed sewing M Max. feed amount: 5mm Max Presser foot with tape guide Light-in-weight type Max. feed amount: 2.5mm Light-in-weight type with the front fulcrum Max. feed amount: 1.6mm LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (eptember, 2003) 5/6

72 Max. zigzag width/ Max. feed pitch Throat plate Feed dog Presser foot (with finger guard) Remarks Light-in-weight type Max. feed amount: 1.3mm For standard zigzag stitching Max. feed amount: 2.5mm Light-in-weight type Max. feed amount: 2.5mm Max. feed amount: 5mm The 5mm-feed is suited to tape-attaching process where the elastic tape is sewn with stretched. Max. feed amount: 2.5mm Max. feed amount: 5mm Light-in-weight type (finger guard: small) Max. feed amount: 2.5mm Max. feed amount: 5mm Light-in-weight type Light-in-weight type with the front fulcrum MD MD MD For attaching tape to brassieres, etc Light-in-weight type In addition to the above-listed ones, many different gauges and attachments for zigzag stitching are available. Please contact us for details. LZ-2280N, 2281N, 2282N, 2282N-7, 2284N, 2284N-7, 2286N, 2288N, 2285N, 2280NU, 2284NU, 2284NU-7 (eptember, 2003) 6/6

73 High-speed, Cylinder-bed, 1-needle, Lockstitch, Zigzag titching Machine with utomatic Thread Trimmer (with standard/3-step zigzag stitching pattern changeover function) LZ-2284C-7 The cylinder-bed more than adequately facilitates the handling of tubular sewing products in circular sewing processes, thereby contributing to increased productivity and upgraded seam quality. This zigzag stitching machine is best suited to the attaching or counter stitching of elastic tape. The machine demonstrates features of the LZ-2284N-7 that offer outstanding productivity and a higher facility operation ratio, which is supported by a maximum sewing speed of 5,000rpm and a one-touch utility changeover between standard and 3-step zigzag stitching patterns. In elastic tape attaching or counter stitching processes for girdles, shorts or swimwear, the machine promises easy handling of the material. The material is placed over the cylinder-bed and can be sewn at once without stopping the sewing machine during sewing. This dramatically increases productivity. PECIFICTION LZ-2284C-7-W/CP Model name titch system LZ-2284C-7 /3-step zigzag titch pattern Max. sewing speed 5,000rpm zigzag stitching: zigzag width of 5mm or less 3-step zigzag: zigzag width set to 8mm or less Max. zigzag width zigzag: 8mm/3-step zigzag: 10mm Max. feeding amount zigzag: 2.5mm/3-step zigzag: 2.0mm Lift of the presser foot y hand: 5.5mm/y knee: 10mm Hook DP hook (with titanium-treated inner hook) Thread take-up Rotary type Needle (at the time of delivery) CHMETZ 134UK, 438(#75)#65#90 ORGN DP5 #9#14 Needle position changing mechanism Provided as standard Reverse feed stitching mechanism Provided as standard obbin thread winder uilt-in the machine head Needle throw pattern cam Grooved cam Cylinder diameter 322mm Lubrication utomatic Lubricating oil JUKI New Defrix Oil No.1 (equivalent to IO VG7) Power requirement/power consumption ingle-, 3-phase/650V Total weight 86.5kg WHEN YOU PLCE ORDER LZ2284C7 Wiper and automatic reverse feed function Wiper utomatic reverse feed function Not provided Provided 0 Provided Provided W uto-lifter Not provided K83 (pedal-driven) ZZ K PC box Control box Motor for C Operation panel C910 PC box For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. M91 Pulley belt Operation panel IP-100 IP100 CP-160 CP160 LZ-2284C-7 (eptember, 2003) 1/1

74 1-needle, Embroidering ewing Machine LZ-271 This machine can be used for extra light-weight materials including lawn and organdy, medium-weight materials including those used for blouses and handkerchieves, and heavy-weight materials on which names and labels are to be embroidered. eautifully finished seams free from needle swaying or material breakage are assured every time. The zigzag width is regulated up to 12mm using the knee lifter. This knee lifter has been designed to fit the jut-type knee lifter widely used by zigzag stitch machines. 4 LZ needle, Lockstitch, Zigzag and Embroidering ewing Machine LZ-391N When this machine is used as an embroidering machine, the zigzag width is as large as 12mm and the sewing speed is as high as 1,700rpm. When used as a zigzag stitch machine, the zigzag width is as large as 10mm and the sewing speed is as high as 2,000rpm. Furthermore, the JUKI LZ-391N can be used as a straight stitching machine capable of running at a speed of 2,000rpm by simply setting the zigzag width to 0. To change from embroidering to zigzag stitching or vice versa, all you need to do is install the throat plate exclusive for either function, and install/remove the presser bar and feed dog. This procedure can be carried out very easily. LZ-391N High-speed, 1-needle, Lockstitch, Zigzag titching Machine LZ-586 While the needle is piercing the cloth, the needle bar does not throw. o, with this feature, tearing the sewing cloth and curving or breaking of the needle is prevented to produce beautifully sewn seams. In order to facilitate smooth passing of the thread around the bobbin case, a thread opener is equipped on these models. Thus, beautiful stitches without flaws can be produced constantly. s the machines are equipped with completely automatic lubrication system by which all essential parts are automatically lubricated by means of plunger pump, there is no worry of scorching of parts to ensure durability and also eliminates troublesome hand oiling. pplications Light-, medium-, heavy-weight materials: ttaching laces to undergarments, table cloth, etc. gathering of negligees, etc. Heavy weight materials: ttaching sweat bands to hats; closing stitches on heels; hemming of rubber corded materials; stitching of all leather goods LZ-586 LZ-271, 391N, 586 (eptember, 2003) 1/2

75 PECIFICTION Model name pplication Max. sewing speed Thread take-up Needle bar stroke Needle (at the time of delivery) Zigzag width Zigzag width regulating method Hook Distance from needle to machine arm Lubrication Lubricating oil LZ-271 Embroidering on light-, medium-, and heavy-weight materials 2,000rpm (with a zigzag width set to 10mm) 1,700rpm (with a zigzag width set to 12mm) Link type 33.4mm D1 (#11) #9#18 012mm Using the jut-type knee lifter with the zigzag width pointer released. D-type hook for embroidering 270mm (from the needle entry bottom of the arm) y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) Model name pplication Max. sewing speed Thread take-up Needle bar stroke Max. stitch length titch length adjustment method Needle (at the time of delivery) Zigzag width Zigzag width regulating method Hook Distance from needle to machine arm Lubrication Lubricating oil LZ-391N Embroidering and zigzag stitching light-, medium-,and heavy -weight materials 2,000rpm (with a zigzag width set to 10mm) 1,700rpm (with a zigzag width set to 12mm) Link type 33.4mm 5mm Moving the knob up/down D1 (#14) #9#16 012mm Using the knee lifter with the zigzag width pointer released. If you sew the product with the zigzag width fixed to a certain value, the pointer should be fixed to that value. D-type hook for embroidering (capable of using a thick thread) 270mm (from the needle entry bottom of the arm) y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) Model name Max. sewing speed Thread take-up Needle bar stroke Max. stitch length titch length adjustment method Lift of the presser foot Reverse feed stitching Needle (at the time of delivery) Zigzag width Hook Lubrication Lubricating oil LZ-586 3,500rpm Link type 30.7mm 4mm Dial system y hand: 6mm, y knee: 10mm Lever system DP58 or DP5 (#14) #11#18 06mm D-type fully rotating hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) TTCHMENT Part No. Description pprication Compass (asm.) Presser bar joint rod (asm.) LZ-271, LZ-391N callop (asm.) LZ-271, 391N, 586 (eptember, 2003) 2/2

76 High-speed, Flat-bed, Top and ottom Covering titch Machine MF-7722 (2-needle, Top and ottom Covering titch Machine) MF-7723 (3-needle, Top and ottom Covering titch Machine) ince the seam tension may be easily increased or decreased, the machine can be used for a broader range of applications. eams can be adjusted depending on the application or material by changing the thread path or adjusting the thread tension controller, to produce soft and low-tensed seams for inner wear or to produce highgrade well-tensed seams for outer wear. Optimization of the thread take-up mechanism and top covering thread path route. The optimized thread take-up mechanism and top covering thread path route contribute to an increased stability of top covering stitches. In addition, the machine is capable of performing sewing with a low tension applied to the thread to offer improved responsiveness to the sewing thread. MF-7723U The machine comes with a variety of features to increase applicable types of sewing products. The machine is provided as standard with a great diversity of features, such as a differential feed adjustment mechanism with a microadjustment mechanism, a feed dog inclination adjustment mechanism, a micro-lifter and a needle bar stroke conversion mechanism. The machine can therefore be quickly adjusted to respond to various materials and processes, thus increasing the applicable types of sewing products. MF-7723U1056 MF-7723CC1056 PECIFICTION Model name MF-7722 MF-7723 titch type 2-needle top and bottom covering stitch 3-needle top and bottom covering stitch Max. sewing speed 6.500rpm titch length mm (stitch length can be adjusted to 4.4 mm) Differential-feed ratio 1:0.71:2 Needle gauge 4.0mm 4.8, 5.6, 6.4mm Needle UY128G #9#14 (standard #10) Lift of the presser foot 5mm (with top & bottom covering stitch), 8mm (with bottom covering stitch) titch pitch adjustment y dial Differential feed adjustment y micro-adjustment mechanism Lubrication utomatic Lubricating oil JUKI Machine Oil 18 (equivalent to IO VG18) Feed dog inclination adjustment Provided as standard Micro-lifter Provided as standard Needle bar stroke converting function Provided as standard ilicon oil tank for needle tip and needle thread Provided as standard Cartridge oil filter Provided as standard Weight of the machine head 46kg WHEN YOU PLCE ORDER MF77 titch type 2-needle, Top and ottom Covering titch 3-needle, Top and ottom Covering titch pplication For universal For collarette U10 C10 Needle pawl shape type (standard) Needle gauge 4.0mm mm mm mm 64 For model category (23) (3-needle), needle gauge category 40 cannot be selected. For application category "collarette (C10)," needle gauge category 48 cannot be selected. MF-7722, MF-7723 (EPTEMER, 2003) 1/2

77 UCL MCHINE LIT ubclass machine asic stitch (universal type) Collarette attaching eams Model No. Number of needles Number of threads Needle gauge (mm) titch length (mm) Differentialfeed ratio Presser lifting amount(mm) Max. sewing speed (rpm) MF-7723-U :0.71:2 5(8) MF-7723-U :0.71:2 5(8) MF-7723-U :0.71:2 5(8) MF-7722-C :0.61:1.1 5(8) MF-7722-C :0.61:1.1 5(8) MF-7722-C :0.61:1.1 5(8) The presser foot lift is 5 mm for collarette with top and bottom covering or 8 mm for collarette with bottom covering. U10 (universal type) This basic model can be used in a broad range of processes including sleeve-/bottom-hemming for T-shirts and coverings for sportswear and knitwear. C10 (for collarette attaching) This model is best suited for attaching collarettes on underwear, briefs and knitwear. pecifications changing between the U10 and C10 can easily be carried out by replacing gauge components. U10 C10 C10 U10 Interchangeable parts Cover related parts Interchangeable parts Cover related parts 1 Cover related assembly parts number Gauge components Parts name Gauge component parts No. 4.0mm 5.6mm 6.4mm Presser foot asm Throat plate Main feed dog Differential-feed dog The coverseam related assembly parts number does not include any attachment. Cover related assembly parts number Gauge components Parts name Gauge component parts No. 4.0mm 5.6mm 6.4mm Presser foot asm Throat plate Main feed dog Differential-feed dog Looper For the gauge size of 4.8 mm, the looper ( ) is also required. MF-7722, MF-7723 (EPTEMER, 2003) 2/2

78 High-speed, 2-needle, 3-thread, ottom Covering titch, elt-loop Making Machine MF-2600 The sewig speed is very fast, the normal rotational speed of the machine is as high as 5,000rpm. This leads to highly efficient belt-loop making. The side cutter is equipped with a newly developed mechanism to drive the knife using the timing belt from the pulley side. This reduces the vibration of the machine during a high-speed operation, thereby leading to a consistent performance. The newly developed binder unique to JUKI is longer than conventional binders. It is therefore capable of rolling up the material smoothly, making beautifully and uniformly finished belt-loops without any twisted or irregularly rolled section. PECIFICTION MF Model name titch type Max. sewing speed titch length Needle bar stroke Feed adjustment method Needle gauge (mm) Finished width Differential-feed ratio Needle (at the time of delivery) Lubrication Lubricating oil MF needle, 3-thread, bottom covering stitch 5,500rpm (normal 5,000rpm) mm 30.4mm y adjusting the amount of eccentricity 4.8, 5.6, mm 1:0.51:3.2 DV1 (#11) #11#14 or UY128G (#75) #75#90 utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) WHEN YOU PLCE ORDER MF2600 Needle gauge 4.8mm 5.6mm 6.4mm 8.0mm F G H K pplication For light-wight materials For medinum-weight materials For heavy-weight materials H Finished width (mm) H J K L Finished width (mm) Q R T M N P U V 2 1 : Needle gauge 2 : Finished width pplication H NEEDLE GUGE: FINIHED WIDTH (light-weight materials) (medium-weight materials) (heavy-weight materials) Finished width H J K L M N P Q R T U V Needle gauge 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm F 4.8mm G 5.6mm H 6.4mm F 4.8mm G 5.6mm H 6.4mm G 5.6mm H 6.4mm MF-2600 (eptember, 2003) 1/1

79 High-speed, Flat-bed, 2-needle Double Chainstitch Machine MH-380 (parallel 2-needle) MH-382 (tandem 2-needle) It comes with JUKI s unique inclined crank type looper mechanism. This gives the machine outstanding durability. You can use the sewing machine for a long time without ever worrying about looper failure. You can easily set the machine to perform condensation stitching by operating the lever. Condensation stitches that prevent the thread from fraying can be consistently sewn. ttachments (optional) have been prepared for many different applications, including sewing sides of jeans, slacks and skirts, hemming pockets, making decorative stitches on tape for sportswear. MH PECIFICTION Model name Max. sewing speed titch length Lift of the presser foot Needle bar stroke Needle (at the time of delivery) Thread take-up titch length adjustment Condensation stitches Looper system Looper stroke Elliptical motion Lubrication Lubricating oil Needle cooler MH-380 Parallel 2-needle 6,000rpm 4mm y hand: 5.5mm, y knee: 10mm 30mm TV7 (#14) #9#21 Needle bar thread take-up y stitch dial (lockstitch) y lever for condensation stitching Rocking type looper 22.6mm mm utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Optional MH-382 Tandem 2-needle WHEN YOU PLCE ORDER MH380 U MH382U Needle gauge mm inch 3.2 1/8 C 4.0 5/32 D 4.8 3/16 E 5.6 7/32 F 6.4 1/4 H 7.9 5/16 K 9.5 3/8 L /2 PPLICTION Model MH-380 (parallel 2-needle) MH-382 (tandem 2-needle) pplication ewing sides of slacks Hemming or welting garment parts ttaching lining tape Joining seat of slacks MH-380, 382 (eptember, 2003) 1/3

80 DEVICE ND TTCHMENT Chain-off thread cutter T-8 Down turn hemmer L050 : Needle gauge : Finished width Decorative tape attaching foot 050 pplicable machines: MH-380, MH-382 Class of work: Jeans, Working wear pplications: Cut a chaining thread bridging two workpieces continuously sewn by chainstitch in the way that a knife blade of the cutter is dropped. est suited for continuous sewing on pocket openings of jeans or working wear. Guide width mm (in) Tandem 2-needle 4.0 (5/32) 4.8 (3/16) 6.4 (1/4) 7.9 (5/16) pplicable machines: MH-380 Class of work: Jeans, Working pants pplications: Hem jeans hip pocket mouth, especially suit for sections where high quality straight stitch is required. Finished width (mm) Part No. GT C GT-08000CC GT-08000DC GT-08000FC GT-08000HC Part No. ML-0500P00 ML-0500M00 ML-0500L00 ML-0500K00 pplicable machines: MH-380 Class of work: portswear, Training wear, wimsuits, Uniforms, oxer pants, Rompers pplications: titch accent line attach tapes Materials: Cotton bias tape, or plain woven tape for some limited process. Lap seam folder (Reverse) M052 : Needle gauge : Finished width Left feed top stitch folder M054 : Needle gauge : Finished width Right feed top stitch folder M055 pplicable machines: MH-380 Class of work: Jeans, Working pants, Pants, Overalls pplications: ew side seams Materials: Medium heavy-weight materials and heavyweight materials such as denim, drill, etc. Finished width (mm) pplicable machines: MH-380 Class of work: Jeans, Working pants, Jackets, kirts pplications: ew side seams. ttach flat faces of garments. Finished width (mm) Needle gauge mm (in) 12.7 (1/2) 9.5 (3/8) 7.9 (5/16) 6.4 (1/4) 5.6 (7/32) 4.8 (3/16) Needle gauge mm (in) 12.7 (1/2) 9.5 (3/8) 7.9 (5/16) 6.4 (1/4) 5.6 (7/32) 4.8 (3/16) 4.0 (5/32) Part No. MM MM-0520P00 MM-0520M00 MM-0520K00 MM-0520K00 MM-0520J00 Part No. MM MM-0540P00 MM-0540M00 MM-0540K00 MM-0540K00 MM-0540J00 MM-0540H00 pplicable machines: MH-380 Class of work: Jeans, Working pants, Jackets, kirts pplications: ew side seams. ttach flat faces of garments. : Needle gauge : Finished width Decorative tape attaching foot 051 : Needle gauge : Finished width 50~60mm Tape cutter PECIFICTION WHEN YOU PLCE ORDER T28 Finished width (mm) Needle gauge mm (in) 12.7 (1/2) 9.5 (3/8) 7.9 (5/16) 6.4 (1/4) 4.8 (3/16) 4.0 (5/32) Tape width (mm) Part No. M-0500L0 M-0500QK0 M-0500MH0 M-0500KF0 M-0500HD0 M-0500GC0 pplicable machines: MH-380 Class of work: Ladies wear, Children wear, portswear, Uniforms pplications: ttach decorative tapes and reinforcement tapes Materials: Tape: ynthetic suede cloth tape, decorative tape, plain woven tape. Contact us for special type of tapes. Finished width (mm) pplicable model : MH-380 (Cannot be use with the thread trimmer type.) Operating method : ir drive by air switch pplications : Cutting various tapes related to attaching reinforcement tape and decorative tape Cut specifications : Knife width 20mm Cutting range of the knife 16mm or less ir pressure Needle gauge mm (in) 12.7 (1/2) 9.5 (3/8) 7.9 (5/16) 6.4 (1/4) 5.6 (7/32) 4.8 (3/16) : 0.15~0.5 MPa (1.5~5.0kgf/cm 2 ) Part No. M-0510L0 M-0510QK0 M-0510MH0 M-0510KF0 M-0510JE0 M-0510HD0 : Needle gauge : Finished width uperpose joining guide Edge allowance: Max. 20mm Zipper guide 34mm Finished width (mm) pplicable machines: MH-382 pplications: Used with lockstitch machines or chainstitch machines to sew side seam, and similar runstitch & joining edge of garments with different curve lines Type Light-weight material Medium-weight material Heavy-weight material pacer (assy.) pplicable machines: MH-380 Class of work: Jeans, Working pants pplications: ew zippers on left files Materials: Medium-weight materials such as jeans denim, cotton gabardine, drill etc. witch Finger switch Knee switch T28 Needle gauges, 1/8, 5/32, 3/16, 3/8 and 1/2, should be specially orderd. Needle gauge mm (in) 12.7 (1/2) 9.5 (3/8) 7.9 (5/16) 6.4 (1/4) 5.6 (7/32) 4.8 (3/16) 4.0 (5/32) Part No. MQ Part No. MM MM-0550P00 MM-0550M00 MM-0550K00 MM-0550K00 MM-0550J00 MM-0550H00 Part No. MH MH MH H MH Needle gauge mm (in) 3.2 (1/8") 4.0 (5/32") 4.8 (3/16") 5.6 (7/32") 6.4 (1/4") 7.9 (5/16") 9.5 (3/8") 12.7 (1/2") C D E F H K L MH-380, 382 (eptember, 2003) 2/3

81 TLE OF EXCHNGING GUGE ET MH-380 Description Throat plate Presser foot asm. Needle clamp asm. (with finger guard) Feed dog Rear moving needle guard Right fix needle guard Left needle guard Gauge components 3.2mm (1/8") 4.0mm (5/32") C C C mm (3/16") D D D D00 5.6mm (7/32") 6.4mm (1/4") 7.9mm (5/16") 9.5mm (3/8") E F H K E F H K E F H K F H K E H mm (1/2") L L L L L00 MH MH-380 Description Right looper Left looper ed slide asm. ed slide asm. Folder M MH H Gauge components 3.2mm (1/8") C 4.0mm (5/32") C C CC 4.8mm (3/16") D D DC 5.6mm (7/32") 6.4mm (1/4") E F E F EC FC 7.9mm (5/16") 9.5mm (3/8") H H H HC 12.7mm (1/2") L L0 MH ) ize code 3.2mm (1/8") = 4.0mm (5/32") = C 4.8mm (3/16") = D 5.6mm (7/32") = E 6.4mm (1/4") = F 7.9mm (5/16") = H 9.5mm (3/8") = K 12.7mm (1/2" ) = L 2) Folder code M (for light weight materials) = MH (for medium heavy weight materials) = H (for heavy weight materials) = C MH-380, 382 (eptember, 2003) 3/3

82 1-needle, Double Chainstitch Machine MH-481 MH-481-5(4) (with automatic thread trimmer) The machine comes with a thread spreading mechanism and an adjustable needle guard to prevent stitch skipping. The thread clamp mechanism, tension release mechanism and needle thread draw-out mechanism enable the machine to leave thread of a uniform length after thread trimming, and prevent slip-off of the needle thread. ll of these mechanisms contribute to upgraded sewing. afety stitching (condensation stitching) the perfect method of preventing loose stitches, or reverse feed stitching (back-tacking) can be alternated through the simple adjustment of the stopper of the reverse feed lever. Either sewing method can be used. 1-needle, Double Chainstitch Differential-feed Machine MH-484 MH-484-5(4) (with automatic thread trimmer) The differential-feed is the best-suited feeding device when sewing elastic materials including double-jersey or light-weight materials such as satin or georgette. eautiful, elastic seams are created, while puckering, thread breakage and thread fraying are all prevented. The sewing method can be alternated between stretch stitching and shirr stitching with the simple operation of a lever. This lever is also used to adjust the differentialfeed ratio. PECIFICTION 1-needle, Double Chainstitch, ottom & Variable Top-feed Machine with utomatic Thread Trimmer MH-486-5(4) MH The machine comes with many different functions to prevent uneven material feed and puckering for higher-quality seams. The machine is adaptable to a wider variety of light-to heavyweight materials and takes full advantage of top-feed mechanism. This enables unskilled operators to finish seams of consistent quality. The machine comes with a forced lifting mechanism for the top-feed dog. This enables the operator to place the material to be sewn on the top-feed dog more smoothly. The machine incorporates its exclusive chain-off thread presser pedal foot, which improves seam quality and ease of operation. 6 Model name Feed system Max. sewing speed titch length Top-feed amount Differential-feed ratio Lift of the presser foot Needle bar stroke Needle (at the time of the delivery) titch length adjustment afety stitch Looper system Looper stroke Looper stroke of the front and rear peed control Lubrication Lubricating oil Power consumption MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4) ottom-feed Differential-feed ottom & variable top-feed 5,500rpm 4,500rpm 14mm Main feed: 14mm Differential-feed: 15.6mm 15mm 07mm Max. gathering stitching 1: 3.0 (standard 1: 1.5) Max. stretch stitching 1: 0.5 y hand: 5mm, y knee: 10mm y hand: 5mm, y knee: 7mm 30mm 33mm TV7 (#11) #9#18 TV7 (#11) #9#21 y dial Condensation stitch/reverse stitching (by feed lever) Inclined crank 21.5mm mm 3.2mm (1) (1) (1) utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) (2) (2) (2) (1) From 500rpm to the Max. sewing speed determined by the pulley used (externally adjustable) (2) ingle-phase,3-phase (400W) PPLICTION FOR MH-481/MH-484/MH-486 ERIE Men's shirts lacks, pantaloons, ski pants Coats, blazers kirts One-piece suits, blouses, negligees Uniforms, jumpers Interior decorations ttaching yokes on the back ttaching waist belts, joining sides, seam insides, or hip seams. ewing the center of the back, joining sides, sewing sleeves, belts, collars, and sewing the facing on to the front. ewing the center and joining sides Making pleats or gathers ew side and sew interlining on the wrong side of the material Making pleats or gathers MH-481, 481-5(4), 484, 484-5(4), 486-5(4) (eptember, 2003) 1/2

83 PECIFICTION CONFIRMTION TLE WITH TYPE OF MCHINE Model name MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4) Remarks Condensation stitch Use the reverse stitching lever Reverse stitch djust the stopper Thread clamp device Needle thread releasing device Needle thread drow-out mechanism Thread spreader Movable needle guard liding presser Chain-off thread presser Option Option ilicon oil lubricating unit Chain-off thread presser foot for the MH-480 series Provided as standard (packed together with accessories) OPTION Model Part No. Description Remarks pplication MH-481 MH-481-5(4) MH-484 MH-484-5(4) MH-486-5(4) K4 uto-lifter PF-3 Partial shirring device Upper shirring PF-5 Partial shirring device Lower shirring 060 M ttachment for gathering (manual type) pecialized presser foot, main feed dog, 061 M ttachment for intermittent differential-feed dog gathering (foot pedal type) REPLCELE GUGE TLE MH-481, MH-481-5(4) MH-484, MH-484-5(4) Usage Throat plate Feed dog Presser foot Usage Throat plate Main feed dog Differentialfeed dog Presser foot Light-weight materials CC0 Light-weight materials Medium-weight F F CC0 materials Medium-weight material (standard) F F F CC0 Heavy-weight materials H H H00 Urethan pad G G00 In addition, a urethane feed dog and coarse feed dog are also available. Reverse feed dog C00 Gathering one piece D0 of material 060 and 061 are optionally available. (Use the presser foot, main feed dog and differential-feed dog exclusive for this attachment) MH-486-5(4) MH-486-5(4) D Usage type for general runstitch (rake-in type) For medium turning stitch, gathering stitch (rake-in type: for preventing uneven matelial feed) For sharp turning stitch (pull-in type: for preventing puckering) Throat Feed dog Walking Presser plate foot foot F F D D0 M For seaming side of slacks M M (right-compensaling foot for side pockets) For sharp turning stitch (rake-in type: for preventing puckering) MH-481, 481-5(4), 484, 484-5(4), 486-5(4) (eptember, 2003) 2/2

84 High-speed, Cylinder-bed, Needle-feed, Double Chainstitch Machine MH-1410 With its head mechanism to ensure optimum balance and high rigidity, the machine achieves high-speed performance of 5,000rpm with reduced operating noise and vibration. nd now that an automatic lubricating system and strong needlefeed mechanism are newly adopted, the machine guarantees improved reliability and durability. The MH-1410 is a needle-feed machine noted for an outstanding feed efficiency that ensures smooth stitching at the beginning of sewing and consistent stitch pitches when sewing multi-layered sections. The machine uses a right-and-left split type needle thread take-up guide. Even when the right and left needles sew materials of different thicknesses, separate stroke can be set for the right and left thread take-up guide to ensure consistently excellent seam quality. The differential between the needle-feed amount and bottom-feed amount can be adjusted within the range of -5 % to +25 % of the latter. Waving or twisting of the material can be prevented by adjusting the differential-feed amount to suit the material thickness, the type of folder to be used, and other sewing conditions. The cloth puller is driven by a top roller, ensuring excellent feed efficiency and uniform stitch pitches at multi-layered parts of the material. The machine comes with a light-in-weight roller that offers good adhesion on the material to ensure consistent stitch pitches regardless of the sewing speed, i.e., both at a low high speeds. MH-1410D/K122/V072 6 PECIFICTION Model name MH-1410 MH-1410 MH-1410C MH-1410D Needle gauge 31.8mm 34.9mm 38.1mm 6.4mm25.4mm6.4mm (1-1/4") (1-3/8") (1-1/2") (1/4"1"1/4") Number of needle 2-needle 4-needle Feed system Needle-feed Needle-feed + Cloth puller (optional) titch system Double chainstitch 5,000rpm (when stitch length is 4.5mm or less) Max. sewing speed 4,000rpm (when stitch length is mm) (4,000rpm for the machine equipped with cloth puller) titch length titch adjusting method Lift of the presser foot Needle bar stroke Needle (at the time of delivery) Looper motion Fine adjustment function for the needle-feed amount Peripheral dimension of the cylinder section Lubrication Lubricating oil mm y push-button (needle-feed/bottom-feed synchronized) 9mm 32mm DV57 (#21) #18#25 Longitudinal motion method (longitudinal swing method) : Looper can be tilted for threading Provided as standard ( 5% +25%) 395mm (for the machine that is not equipped with cloth puller) Trochoidal pump type automatic lubrication JUKI New Defrix Oil No.2 (equivalent to IO VG32) Weight of the machine head 46kg 50kg For needle size #23 to #25, a special-order gauge is required. MH-1410 (eptember, 2003) 1/2

85 WHEN YOU PLCE ORDER MH1410 / / Needle gauge Pneumatic auto-lifter Cloth puller 2-needle31.8mm (1-1/4") Not provided Not provided 2-needle34.9mm (1-3/8") provided K122 provided V072 2-needle38.1mm (1-1/2") C 4-needle6.4mm25.4mm6.4mm D (1/4"1"1/4") The needle gauge that falls within the range from 4.8mm to 50.8mm is available. Gauges other than those shown in the above table are available on a special order. The V072 cannot be retrofitted to your machine after the setup. Designate one when placing order for the machine. OPTION Model K122 Part No. GK MV MV MV Description Pneumatic auto-lifter (JUKI: The C-380 or a commercially available needle positioning motor is required.) Needle cooler (pneumatic type): For MH-1410 Needle cooler (pneumatic type): For MH-1410, MH-1410C Needle cooler (pneumatic type): For MH-1410D rakedown folder bracket (asm.) Top roller (made of iron) Top roller (made of urethane) Top roller cover (for urethan roller) MH-1410 (eptember, 2003) 2/2

86 Feed-off-the-arm, 2-needle Double Chainstitch Machine M-1190 oth needle thread tension and bobbin thread tension have been decreased after reinvestigation of the double chainstitching mechanism. Furthermore, the stitch dial, gauges and looper have been dramatically improved, thereby forming beautifully finished seams and preventing puckering. Relation between the needle and the looper, and the relation between the needle and the feed have been changed. This enables the machine to consistently form seams of uniform quality. The machine prevents stitch skipping when it runs at high speed, thereby producing higher-grade products. Newly developed folders are equipped as standard for the machine. The folders are designed to match the presser foot and allow overlapping material to be fed smoothly under them. They are easy to use and improve consistency in sewing. Many different kinds of folders are prepared in accordance with the materials, ranging from extra heavy-weight materials to medium-weight materials. Feed-off-the-arm, 2-needle/3-needle Double Chainstitch Machine M M-1260 (2-needle) M-1261 (3-needle) The placement of the feed mechanism has been charged to decrease the feed amount when the needle enters the material, thus preventing the needle from bending. The bobbin thread is clamped without fail, thereby producing consistent thread loops. The looper tucks the needle thread without fail, thereby finishing uniform seams. The number of teeth of the feed dog has been increased so that it can easily catche overlapping material. The shape of the presser foot has been modified to prevent single-sided contact with the overlapped part. The movable needle guard (rear) is provided with a vertical adjusting mechanism. These features contribute to smoother feed of heavy-weight materials, thereby preventing stitch skipping. Thanks to the tread guide located between the needle bar thread take-up and the intermediate tension release lever, the timing to tense the needle thread can be changed and the bobbin thread tension can be decreased. s a result, the machine is capable of beautiful finished stitches with a soft appearance even when heavy-weight material is used. PECIFICTION M-1261/V045 Model name pplication No. of needle Max. sewing speed Needle bar stroke Needle (at the time of delivery) Needle gauge titch length Lift of the presser foot Thread take-up lever Circumference of tube at the needle entry Needle guard titch adjusting system Lubrication Lubricating oil M-1190 M-1190M M1260/V045 M-1261M/V045 M-1261/V045 M-1190/V046 M-1190M/V045 M-1260 M-1261M M-1261 For light-weight For medium-weight For medium-to heavy-weight materials For extra heavy-weight materials materials materials for jeans 2 3 4,000rpm (normal 3,500rpm) 3,600rpm (normal 3,000rpm) 28.0mm 33.2mm CHMETZ -64 (Nm80) CHMETZ -64 (Nm100) CHMETZ UY128G (Nm120) CHMETZ UY128G (Nm130) Nm60Nm90 Nm80Nm120 Nm100Nm140 Nm100Nm140 ORGN TV64-NY (#12) ORGN TV64-NY (#16) ORGN UY128G-NY (#19) ORGN UY128G-NY (#21) #8#14 #12#19 #16#22 #16#22 3.2mm (1/8"), 4.0mm (5/32"), 4.8mm (3/16"), 5.6mm (7/32"), 6.4mm (1/4") 4.8mm (3/16") 5.6mm (7/32"), 6.4mm (1/4"), 7.2mm (9/32"), 8.0mm (5/16"), 9.6mm (3/8") mm mm Thread pulling cam type thread take-up lever 171mm Longitudinally-fixed needle guard 10mm Needle bar thread take-up lever y push-button (with locking mechanism) emi-automatic lubrication JUKI New Defrix Oil No.1 (equivalent to IO VG7) 190mm ackward travelling needle guard M-1190, 1260, 1261 (eptember, 2003) 1/5

87 WHEN YOU PLCE ORDER M1190 / M1260D/ Optional device-1 Optional device-2 Optional device-1 Optional device-2 pplication For light-weight materials (standard) For medium-weight materials M Needle gauge 3.2mm (1/8") 4.0mm (5/32") 4.8mm (3/16") 5.6mm (7/32") 6.4mm (1/4") C D E F Needle gauge 4.8mm (3/16") D M1261 / Optional device-1 Optional device-2 Optional device-1 Not provided Rubber V045 teel Rubber V046 teel V045R V045 V046R V046 Not provided Chain-off thread cutter (T 27) Optional device-2 Without cloth puller For V045 For V046 Pedal switch type Knee switch type Pedal switch type Knee switch type Pedal switch type Knee switch type Needle cooler (CL-3) Needle cooler with folder air blow type ilicon oil lubricating Pneumatic auto-lifter Pedal switch type K81 Knee switch type + C + E + K + D + E + K + C + P F G H J C D E P K pplication For extra heavy-weight materials (standard) For medium-weight materials M Needle gauge 5.6mm (7/32") 6.4mm (1/4") 7.2mm (9/32") 8.0mm (5/16") 9.6mm (3/8") E F G H K OPTION Model Part No. Description Feature Cloth puller V045 MV Made of rubber MV Made of steel MV Made of rubber V046 MV Made of steel Chain-off thread cutter GT Pedal switch type GT-27000C0 Knee switch type GT Pedal switch type T27 GT-27000D0 Knee switch type GT Pedal switch type GT-27000E0 Knee switch type Needle cooler Top roller type Top and bottom roller type Without cloth puller For V045 For V046 The cloth puller is an auxiliary tool for smooth feed of the material. The top roller type cloth puller (V045) can be used for medium- to extra heavy-weight materials for jeans. The top and bottom roller type cloth puller (V046) can be used for light- to medium-weight materials. Furthermore, you can choose either a rubber cloth puller that is soft on material, or steel cloth puller that securely clamps the materials. The chain-off thread cutter is operated by the knee switch or the pedal switch. The chain-off thread cutter comes in three different types in accordance with the types of cloth pullers and whether or not the machine is equipped with cloth puller. CL-3 GCL GCL With an auxiliary blower for light-weight materials. The needle cooler is a device to prevent thread breakage caused by a hot needle. The needle cooler equipped with an auxiliary blower (for light-weight materials) available, and this allows the material to be easily rolled in at the sewing start. ilicon oil lubricating unit for the needle thread For M-1190 series For M-1260 series ilicon oil lubricating unit is an auxiliary device to reduce the frequency of thread breakage caused by a hot needle. Pneumatic auto-lifter GK K81 GK Pedal switch type Knee switch type The pneumatic auto-lifter helps reduce the operator's fatigue and enables the operator to operate the sewing machine rhythmically. M-1190, 1260, 1261 (eptember, 2003) 2/5

88 TLE OF EXCHNGING GUGE PRT M Description Gauge set (with finger guard) Throat plate Needle clamp asm. Presser foot asm. (with finger guard) Feed dog Looper asm. (L) Looper asm. (R) Needle gauge size ize 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") E F H 5.6mm (7/32") 6.4mm (1/4") 7.9mm (5/16") Description M295 Lap seam folder asm. M296 M297 Feed dog asm. (with removing needle holder) Looper needle guide (for removing needle holder) Throat plate (for chain-off thread) Feed (for chain-off thread) Needle gauge size ize C D E F H 3.2mm (1/8") 4.0mm (5/32") 4.8mm (3/16") 5.6mm (7/32") 6.4mm (1/4") 7.9mm (5/16") MM-2950 MM-2950 MM-2950CC MM-2950DD MM-2950EE MM-2960 MM-2960 MM-2960CC MM-2960DD MM-2960EE MM-2970 MM-2970 MM-2970CC MM-2970DD MM-2970EE MM-2970GG Folder mark: M295- Extra light-weight materials, M296 - Light-weight materials (M-1190 standard equipment), M297 - Medium-weight materials (M-1190M standard equipment) The folder is not included in gauge set. For code H, throat plate, presser foot and feed dog for M-1190 are used. lso, exclusive needle guards ( )are necessary. M-1190M Description Gauge set (with finger guard) Throat plate Needle clamp asm. Presser foot asm. (with finger guard) Feed dog Looper asm. (L) Looper asm. (R) Needle gauge size ize 3.2mm (1/8") C 4.0mm (5/32") D 4.8mm (3/16") E 5.6mm (7/32") F 6.4mm (1/4") Description Lap seam folder asm. M296 M297 Throat plate (for chain-off thread) Feed (for chain-off thread) Needle gauge size ize 3.2mm (1/8") MM-2960 MM C 4.0mm (5/32") MM-2960 MM-2970 D 4.8mm (3/16") MM-2960CC MM-2970CC E 5.6mm (7/32") MM-2960DD MM-2970DD F 6.4mm (1/4") MM-2960EE MM-2970EE M-1190, 1260, 1261 (eptember, 2003) 3/5

89 M-1261/V045 (for extra heavy-weight materials) Description Gauge set (with finger guard) Throat plate Needle clamp asm. Presser foot asm. (with finger guard) Feed dog asm. Needle gauge size ize E 5.6mm (7/32") F 6.4mm (1/4") G 7.2mm (9/32") H 8.0mm (5/16") K 9.5mm (3/8") M-1261/ V045 (for heavy-weight materials)---option Description Looper (L) Looper (R) Looper (C) Description Gauge set Throat plate Feed dog asm. Needle gauge size Mark Mark Mark Needle gauge size ize Mark No. Mark No. Mark No. ize E 5.6mm (7/32") E 5.6mm (7/32") F 6.4mm (1/4") F 6.4mm (1/4") G 7.2mm (9/32") G 7.2mm (9/32") H 8.0mm (5/16") H 8.0mm (5/16") K 9.5mm (3/8") K 9.5mm (3/8") M M/V045 (for medium-weight materials)---option Description Gauge set (with finger guard) Throat plate Needle clamp asm. Presser foot asm. (with finger guard) Feed dog asm. Looper (L) Looper (R) Model Needle gauge size Mark Mark M-1260 /V045 ize D 4.8mm (3/16") E 5.6mm (7/32") Mark No. Mark No M-1261 /V045 F G H 6.4mm (1/4") 7.2mm (9/32") 8.0mm (5/16") K 9.5mm (3/8") pacer for presser crew for spacer Model Description Needle gauge size Looper (C) Thread guide No. Thickness Part No Description djusting plate djusting plate C djusting plate D Part No P P Qty M-1260 /V045 ize D 4.8mm (3/16") E 5.6mm (7/32") djusting plate djusting plate E The spacer and installing screws are not included in gauge set. 2 2 M-1261 /V045 F G H 6.4mm (1/4") 7.2mm (9/32") 8.0mm (5/16") No. Thickness pacer for presser Part No. Description djusting plate K 9.5mm (3/8") djusting plate djusting plate C djusting plate D The spacer is not included in gauge set. M-1190, 1260, 1261 (eptember, 2003) 4/5

90 M-1261M /V045 (for medium-weight materials) Description Gauge set (with finger guard) Throat plate Needle clamp asm. Presser foot asm. (with finger guard) Feed dog asm. Needle gauge size ize E 5.6mm (7/32") F 6.4mm (1/4") G 7.2mm (9/32") H 8.0mm (5/16") K 9.5mm (3/8") Description Looper (L) Looper (R) Looper (C) Needle gauge size Mark Mark Mark Mark Mark Mark ize No. No. No. E 5.6mm (7/32") F 6.4mm (1/4") G 7.2mm (9/32") H 8.0mm (5/16") K 9.5mm (3/8") Description Needle gauge size Mark Folder asm. M297 M298 M299 MH H XH Mark ize D 4.8mm (3/16") MM-2970CC E 5.6mm (7/32") MM-2970DD MM-2980 MM-2990 F 6.4mm (1/4") MM-2970EE MM-2980 MM-2990 G H K 7.2mm (9/32") 8.0mm (5/16") 9.5mm (3/8") MM-2970FF MM-2970GG MM-2970HH MM-2980CC MM-2980DD MM-2980EE MM-2990CC MM-2990DD MM-2990EE The folder is not included in gauge set. Folder mark M297 Medium-weight materials (M-1261M/1260/V045 standard equipment) M298 Heavy-weight materials M299 Extra heavy-weight materials (M-1261/V045 standard equipment) 1 2 Description Roller asm. Needle gauge size teel roller Urethane roller ize D 4.8mm (3/16") MV MV E 5.6mm (7/32") F 6.4mm (1/4") G H K 7.2mm (9/32") 8.0mm (5/16") 9.5mm (3/8") The cloth roller is not included in gauge set. The kind of roller teel roller Heavy & extra heavy-weight materials (M-1261/V045 standard equipment) Urethane roller Medium-weight materials M-1190, 1260, 1261 (eptember, 2003) 5/5

91 Computer-controlled, Dry-head, High-speed, ingle-thread, Chainstitch utton ewing Machine M-1800 (with wiper unit) The machine has 55 different stitching patterns as standard. In addition to the sewing shapes, the buttonhole intervals and number of stitches can also be changed on the operation panel. The machine completely supports many different button specifications to increase its range of applicability, reduce costs associated with changes in specifications, and save the operator from having to adapt the machine to different specifications. The machine performs thread trimming at the optimal position by correcting the button position with respect to the needle entry of the last stitch. This shortens the thread remaining on the material after thread trimming to approx. 3.5mm. The machine comes as standard with the solenoid-operated, thread-tensionchangeover "thread-fray-prevention function. " ince the machine is designed to use a long needle (TQ7), the "thread-fray-prevention function" can be used for sewing shank buttons. The machine head is a non-lubricating type. With this type, the operator never has to add oil, and staining of the sewing product with oil is an impossibility. M-1800/R10 (with button feeder) The three different operation modes available are the automatic button feeding mode in which the machine continuously feeds the buttons in the feeder bowl, the non-feed mode in which the operator manually places the buttons in the sewing position one by one, and the small-lot sewing mode in which the operator sets the buttons in place for one garment (five or six buttons) in advance, upon which the buttons are automatically and continuously fed to the sewing position. s a result the machine can employed by a small-lot production system by selecting the appropriate operation mode. The machine is provided with a wider sewing area to facilitate garment setting, and allows the operator to check the remaining quantity of buttons while remaining seated, thereby enhancing ease of operation. Furthermore, the machine allows the operator to continuously sew buttons with pedal depressed, thereby helping reduce the operator's fatigue. PECIFICTION M-1800 M-1800/R10 7 Model name Max. sewing speed mount of feed pplicable button titching shape Wiper unit Lift of the button clamp Needle bar stroke Needle (at the time of delivery) Feed system Knot-tying mechanism Lubrication Discrimination of button to be feed utton feed utton feed mode Power requirement Power consumption Weight Crosswise feed 010mm/Lengthwise feed 06.5mm Type: Round-shaped flat button ize: 1028mm ttachment: For small button (1012mm) For medium button (1220mm) For large button (20mm or more) Thickness: mm The button clamp jaw lever for thick button has to be used for buttons with thicknesses of 3.5mm or more. Type: hank button, wrapped-around button, snap, metal button, stay button, label (exclusive attachments have to be used.),,,,,,,,,,,,,,,,, M-1800 M-1800 M-1800/R10 1,800rpm,, Options ingle-phase V, V (by changing over the PW connector) 150W Machine head, circuit board 25kg Crosswise feed 04.0mm/Lengthwise feed 04.0mm Type: Round-shaped flat button ize: 926mm Machines can be custom ordered for the sewing of button diameters outside the standard range less than 10mm and less, 19mm and over. For button of which diameter is 16mm or more, a button clamp jaw lever for large buttons has to be used. Thickness: mm Provided as standard Max. 14mm 48.6mm TQ7 (#16) #14#20 y stepping motor Provided as standard No lubrication Vibration system y the horizontal, forced feed mechanism utomatic feed mode, non-feed mode, and small-lot sewing mode ingle-phase 100V, 115V, 200V, 220V, 240V 250W Machine head, circuit board control box for R device + table 56.5kg M-1800, 1800/R10 (eptember, 2003) 1/4

92 M-1800, M-1800 (with wiper unit) WHEN YOU PLCE ORDER OPTION Machine head, Circuit board M1800 pecification Without wiper unit With wiper unit PTTERN DT TLE ttachment For flat button (small) For flat button (medium) M Model Part No. Description M Wiper device (for M-1800) M step pedal unit PK-51 GPK PK-57 GPK pedal unit for standing work 2-step pedal unit for standing work Feature wiper device and thread pulling wire used in unison to sew buttons without cross-over stitches. foot pedal unit and accompanying pitman rod. The pedal is operated in two steps, i.e., for lowering the button clamp and starting the sewing machine to facilitate positioning of the button and sewing product. For PK-51 or PK-57, pedal switch conversion cable asm. (Part No.: M ) DIFFERENCE IN KNOT-TYING METHOD Pattern No. hape pplication titch diagram Number of stitches Data setting range titch pitch Data setting range hould the last stitch undo holed 4-holed 4-holed 15, 19, 23, 27 16, 20, 24, 28 15, 19, 23, 27 Conventional machine With thread-frayprevention function. M-1800, M-377 tate of the finished seam holed 4-holed 16, 20, 24, 28 15, 19, 23, mm (in increments of 0.2 mm) In the event that the last stitch comes united, the thread will not easily come off holed ince the thread knot is securely tied, the last stitch is unlikely to loosen. 8, 10, 12, holed holed 15, 19, 23, holed 16, 20, 24, holed holed 17, , 2.8, 3.0mm holed ttaching flat button (small) holed 4042 Label attachment 5, 7 6.0, 8.0, 10.0mm utton neck wrapping, 2nd process Zigzag width: 4 mm utton neck wrapping, 2nd process Zigzag width: 5 mm utton neck wrapping, 2nd process Zigzag width: 6 mm 6, 10, 16 utton neck height 06.5mm (in increments of 0.2 mm) For all stitch shapes, three different pieces of data can be established by selecting the number of stitches and stitch pitch within the respective data setting ranges. pace pin (accessory) M-1800, 1800/R10 (eptember, 2003) 2/4

93 TTCHMENT TLE pplication ketch For M-1800 For M-373 For M-377 For flat button For shank button mall- to large-button thickness 5.0mm Left Right Large-button thickness 3.5mm Medium-button thickness 3.5mm mall-button thickness 3.5mm C utton size : 06.5mm : 06.5mm C: 1028mm utton size : 06.5mm : 06.5mm C: 2028mm utton size : 04.5mm : 04.5mm C: 1220mm utton size : 03.5mm : 03.5mm C: 1012mm utton diameter: 16mm or less hank size : 56mm : 2.53mm utton diameter: 16mm or less Responds to slight variations in the button shank. D C D C D Common MZ MZ Common MZ Not prepared 7 uttons with round shank : 5mm Cloth-to-button distance is small MZ utton-to-material distance : 5.5mm For wrapped-around button 1st process utton-to-material distance is adjustable. The machine is capable of sewing flat button without neck wrap. : 3mm or more : 12mm or less nd process The machine wrap the button neck while moving the attachment back and forth. MZ For flat button and wrapped-around button (first process of button neck wrapping) utton-to-material distance : 5.5mm Flat button sewing process or the first process of button-neck wrapping is enabled by sliding the neck wrapping foot away from the sewing position. MZ For snap ize : 8mm For metal button For stay button To be used in combination with the or For the : 3.5mm or more MZ For label attaching Zigzag width: Max. 10mm MT-64401Z utton clamp mechanism, lifting hook (Part No.: ) pplicable by replacing the lifting hook of the button clamp mechanism with that for the M ttachments for sewing flat button, shank button, wrapped-around button, snap and bartacking label are prepared. Note that the attachments for the button clamp jaw lever of your M-373 or -377 can be used with the M-1800 only by replacing the lifting hook of the button clamp mechanism with the lifting hook exclusive to the M-1800 (Part No.: ). M-1800, 1800/R10 (eptember, 2003) 3/4

94 M-1800/R10 (with button feeder) WHEN YOU PLCE ORDER Machine head, Circuit board: with button feeder M1800 / R10 UTTON CRRIER Configuration of button carrier For 4-holed button For 2-holed button ttachment For flat button (small) For flat button (medium) OPTION Description utton clamp jaw lever (left) for large-sized button utton clamp jaw lever (right) for large-sized button hape of button M HPE OF UTTON pplicable button 1.2mm or more For General Export For CE Power supply V V Feed plate 16 (For small-button) 22 (For medium-button) M Part No. (asm.) MZ MZ Inapplicable carrier 1.2mm or less utton without indented part (concavo-convex shape button) C Distance (mm): Distance between holes in button Distance (mm): Diameter of set pin Taper Part No Optional Q R T U V W F1 D X Z G1 H1 E1 Distance (mm): Distance between holes in button Distance (mm): Diameter of set pin Part No E F G L H M J N K P C J1 For vertical 2-hole button Remarks Thickness of button should be 1.8mm to 3.5mm utton with thin edge may not be fed by the button feeder. M-1800, 1800/R10 (eptember, 2003) 4/4

95 ingle-thread, Chainstitch, utton ewing Machine M-373N eries The 4-holed button sewing mode can be easily switched over to the 2-holed button sewing mode in accordance with changing sewing specifications. Furthermore, the button hole interval can be easily changed by operating the lever. The number of stitches can be quickly selected from among 8, 16 and 32 stitches corresponding to the change in sewing specifications. The machine ensures consistent sewing performance even when it runs at 1,500rpm. The unique speed-decreasing device reduces vibration when the sewing machine stops, thereby enabling the sewing machine to beautifully finish buttons with accuracy. M-373N PECIFICTION 7 Model name Thread trimming mechanism ewing speed Number of stitches Feed length titching shape pplicable button utton size Thickness of button Needle bar stroke Needle (at the time of delivery) utton clamp lifting system ewing system top-motion mechanism Lubrication Lubricating oil Power requirement/motor used M-373N Interlocked with the presser lifter Cut with the fixed knife and moving knife Max 1,500rpm, Normal 1,300rpm 8, 16 and 32 stitches (6, 12 and 24 stitches are also available by changing the cam) Crosswise feed mm, Lengthwise feed 06.5mm,, Round-shaped flat button (2-holed, 4-holed) hank button, Wrapped-around button, nap, Label, Metal button, tay button (exclusive attachments have to be used) 1028mm Max. 5mm 48.6mm TQ7 (#16) #14#20 utomatic system (pedal type possible) ingle thread chainstitch utomatic stop-motion mechanism (equipped with the speed-decreasing device and the reverse rotation preventing device) y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) ingle- or 3-phase/200W (1/4 HP), general-purpose motor WHEN YOU PLCE ORDER Machine head M373N / ubclass models utton clamp unit 8, 16 and 32 stitches For flat button (small) 8, 16 and 32 stitches 10 8, 16 and 32 stitches 11 For flat button (medium) M For sewing flat buttons M-373N eries (eptember, 2003) 1/2

96 TTCHMENT TLE Existing attachments are applicable. pplication ketch ttachment ymbol Part No. Finger guard mall- to large-buttons thickness 5.0mm Left Right utton size : 06.5mm : mm C: 1028mm D C D C For flat buttons Large-buttons thickness 3.1mm Medium-buttons thickness 2.8mm C utton size : 06.5mm : mm C: 2028mm utton size : 04.5mm : mm C: 1220mm Z031 Z032 MZ D mall-buttons thickness 2.8mm utton size : 03.5mm : mm C: 1012mm utton diameter: 16mm or less hank size : 56mm : 2.53mm Z For shank buttons utton diameter: 16mm or less Responds to slight variations in the button shank. Z040 MZ uttons with round shanks : 5mm Cloth-to-button distance is small. Z040 MZ utton-to-material distance : 5.5mm Z st process utton-to-material distance is adjustable. : 3mm or more : 918mm Z041 MZ For wrappedaround buttons utton-to-material distance is adjustable. The machine is capable of sewing flat buttons without neck wraps. : 3mm or more : 912mm Z Z nd process The machine wraps the button neck while moving the attachment back and forth. Z046 MZ For flat buttons and wrapped-around buttons (first process of button neck wrapping) utton-to-material distance : 5.5mm Flat button sewing process or the first process of button-neck wrapping is enabled by sliding the neck wrapping foot away from the sewing position. Z172 MZ For snaps ize : 8mm Z For metal buttons Z To be used in combination with the (Z044) For stay buttons To be used in combination with the MZ (Z041) or : 3.5mm or more Z039 MZ For label attaching Zigzag width: 36.5mm Z044 MT-64401Z M-373N eries (eptember, 2003) 2/2

97 ingle-thread, Chainstitch, utton ewing Machine with Knot-tying Mechanism M-377N eries The machine ties a secuare knot to prevent the finished seam from coming undone from the last stitch. ince the knots are firmer than conventional knots, the hardly ever come undone. Even if the last stitch comes undone, the thread is not likely to come off, so the risk of losing buttons is dramatically reduced. The 4-holed button sewing mode can be easily switched over to the 2-holed button sewing mode in accordance with changing sewing specifications. Furthermore, the button hole interval can be easily changed by operating the lever. The number of stitches can be quickly selected from among 8, 16 and 32 stitches corresponding to the change in sewing specifications. M-377N PECIFICTION Model name Thread trimming mechanism ewing speed Number of stitches Feed length titching shape pplicable button utton size Thickness of button Needle bar stroke Needle (at the time of delivery) utton clamp lifting system ewing system top-motion mechanism Lubrication Lubricating oil Power requirement/motor used WHEN YOU PLCE ORDER Machine head M377N / M-377N Interlocked with the presser lifter Cut with the fixed knife and moving knife Max 1,500rpm, Normal 1,300rpm 8, 16 and 32 stitches Crosswise feed mm, Lengthwise feed 06.5mm,, Round-shaped flat button (2-holed, 4-holed) 1028mm Max. 3.1mm 48.6mm TQ1 (#16) #14#18 or TQ7 (#16) #14#20 utomatic system (pedal type possible) ingle thread chainstitch utomatic stop-motion mechanism (equipped with the speed-decreasing device and the reverse rotation preventing device) y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) ingle- or 3-phase/200W (1/4 HP), general-purpose motor 7 ubclass models 8, 16 and 32 stitches 8, 16 and 32 stitches 10 utton clamp unit For flat button (small) For flat button (medium) M 8, 16 and 32 stitches 11 For sewing flat buttons TTCHMENT FOR FLT UTTON ketch For large button Z201 For medium-sized button Z202 ketch utton size : 36.5mm : 2028mm utton size : 35mm : 1220mm M-377N eries (eptember, 2003) 1/1

98 Computer-controlled, High-speed, Lockstitch, utton ewing Machine LK-1903 The machine achieves sewing speed of 2,700rpm. The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time. The machine is provided as standard with 50 different sewing patterns. The machine permits easy changeover of sewing patterns for effortless execution of an inexhaustible range of sewing specifications. The machine is provided as standard with the active tension (electronic thread tension control mechanism). ince the machine is provided with an active tension mechanism, it is able to set a needle thread tension that matches various sewing conditions (such as thread, material and sewing speed) on the operation panel, store the data in memory and reproduce it. LK LK-1903/R35 (with button feeder) It provides better productivity as it achieves the maximum speed of 2,700rpm (2,500rpm in normal use) and is equipped with the high speed trimmer. With our original horizontal forced feed mechanism, the button carrier sets a button in position so that the operation is simplified. Furthermore, operator fatigue is reduced since what operator needs to do is only setting material and pressing a pedal. 7 LK-1903/R35 PECIFICTION Model name LK-1903 LK-1903/R35 Max. sewing speed 2,700rpm (normal 2,500rpm) Type: Round-shaped, flat button Type: Round-shaped, flat button (2-holed, 4-holed) ize: 832mm ize: 920mm (standard 820mm) For small button: 1015mm utton size For medium-sized button: 1218mm (Those that are smaller than 10mm or larger than 18mm must be specially ordered.) Thickness: mm titch length 0.110mm (0.1mm step) Needle bar stroke 45.7mm Lift of the work clamp foot Max. 13mm Max. 11mm uto-lifter Provided as standard (stepping motor type) Needle thread tension ctive tension (electronic thread tension control system) Needle (at the time of delivery) DP17(#14) Hook shuttle hook Number of stitches that can be stored in memory Max. 20,000 stitches Number of standard patterns 50 patterns Number of data that can be input 200 patterns ( For up to 150 patterns, sewing data can be added.) Enlarging/Reducing facility 20200%(1% step), Pattern enlargement/reduction can be done by increasing/decreasing the stitch length Memory medium EEP-ROM/EP-ROM obbin thread counter Provided as standard (Up/Down method) upplying and sorting of button Vibration system utton feed Horizontal forced button-feed mechanism utton feed mode utomatic feed mode, non-feed mode, and small-lot sewing mode Lubrication Hook: minute-quantity lubrication Lubricating oil JUKI New Defrix Oil No.2 (equivalent to IO VG32) ewing machine motor 450W compact C servomotor (direct-drive system) Power consumption 320W 350W Weight Machine head (include motor) 42kg, Control box 16.5kg 115kg (include machine head, table and R35) LK-1903, LK-1903/R35 (eptember, 2003) 1/4

99 LK-1903 TLE OF THE EWING PTTERN X Pattern No. titch shape ewing thread (pcs.) length X (mm) length Y (mm) Pattern No. titch shape ewing thread (pcs.) length X (mm) length Y (mm) Y MODEL CLIFIED Y UTTON IZE LK-1903, LK-1903/R35 (eptember, 2003) 2/ mm or more (mm) (mm) Min Max (1) sewing lengths X and Y given above are given assuming that the scale is 100. (2) Use the patterns No with hole diameter 1.5mm or less. Model name LK LK Option utton size For extra-small button For small button (accessory) For medium-size button For large button Outside diameter that can be adjusted (mm) ewing Length (Y) size (mm) Width (X) Thickness (2.2) (2.2) (2.2) (3.2) (mm) (2.7) (2.7) (0.9) MZ G K L MZ D utton clamp (MZ158070) F (MZ ) (MZ ) (MZ157070) E jaw lever Right (MZ ) C (MZ ) C (combination) ( ) Part No. MZ G K L MZ D Left (MZ158080) F (MZ ) (MZ ) (MZ157080) E (MZ ) C (MZ ) C ( ) 1.6 (1.6) Needle hole (1.8) (1.8) guide (mm) (1.1) 2.8 (3.5) C C 1.6 MZ (1.6) (MZ ) Part No. ( ) ( ) MZ MZ (D Y00) Feed plate MZ (8.5) MZ (10) MZ (12.5) Parts shown in parentheses ( ) are optional.engraved marker Model name Option utton type For shank button Max. sewing speed 1,500rpm Outside diameter 820 Diameter of hole in button 1.5 or more utton configuration Configuration of shank Position of hole in button Pattern No. 18, 19, 20, 21, 22 Optional part for shank button Part No. Name of part Pick-up device complete D1401M1YC0 Needle bar (for TQ-1) MZ Wiper (asm.) Moving plate link ushing L TN (2 pcs.) crew MZ utton support link D TP Hinge screw Connecting link L TN (2 pcs.) crew MZ Needle hole guide MTQ Needle TQ3 #14

100 LK-1903/R35 MODEL CLIFIED Y UTTON IZE Model name LK /R35 LK /R35 utton size For small button For medium-size button Outside diameter that can be adjusted (mm) ewing Length (Y) size (mm) Width (X) Thickness (mm) (2.2) P MZ J utton clamp (MZ ) H jaw lever Right (combination) Part No P MZ J Left (MZ ) H Needle hole guide (mm) HPE OF UTTON hape of button Remarks (1.8) C C 1.6 MZ Part No. ( ) MZ Feed plate MZ (8.5) MZ (10) Parts shown in parentheses ( ) are optional. Engraved marker pplicable button 1.2mm or more Thickness of button should be 1.8mm to 3.5mm. Inapplicable carrier 1.2mm or less utton without indented part (concavo-convex shape button) utton with thin edge may not be fed by the button feeder. UTTON CRRIER Distance (mm): Distance Distance (mm): between Diameter holes in of set pin button Configuration of button carrier For 4-holed button For 2-holed button 1.0 Distance (mm): Distance Part No. Distance (mm): between Diameter Part No. holes in of set pin button Optional Tapered Q R T U V W F1 D X Z G1 H1 E1 For thick buttons uitable model: LK-1903/R35 Thickness of button should be 2.5mm5.0mm Please contact our branch and sales offices E F G L H M J N K P C 7 OPERTION PNEL utomatic supply mode The machine and button feeder are connected and run together. It starts sewing a button by pressing a pedal, thread trimmer is activated after sewing a button, and button feeder sets the next button in position automatically. The machine repeats these operations with this mode. Mode for individual This mode is for the machine only. s button feeder will not be activated, this can be used as a standard button sewing machine. Mode for small lots ame as the automatic mode, but parts feeder will not be activated. It discharges the required amount of buttons in the index and sews buttons automatically. This is suitable for smaller lots. LK-1903, LK-1903/R35 (eptember, 2003) 3/4

101 WHEN YOU PLCE ORDER Machine head Control box LK1903 MC596 pplication Work clamp foot utton clamp jaw lever For extra-small, small button 301 For medium-size button 302 Power supply 3-phase V E V K ingle-phase CE V (not provided with N power switch) Operation panel panel IP-200 P Machine head LK1903 /R35 pplication Work clamp foot utton clamp jaw lever For small button 311 For medium-size button 312 Feed plate For small button (standard: 16mm) For medium-size button (22mm) M Power supply 115V C 220V D ingle-phase 240V E CE 230V (not provided G with power switch 3-phase 220V K Operation panel panel IP-200 cannot be installed. OPERTION PNEL (You can choose operation panel.) TNDRD PNEL Functional settings, such as pattern numbers and needle thread tensions can be established through the operation panel with ease. Distance between holes in a button can be easily changed by means of pattern enlargement/reduction feature. sewing patterns can be assigned to pattern keys P1 to P50. ny of the sewing patterns assigned to the P1 to P25 pattern keys can be activated with a touch of the corresponding key. This means that workability is improved by assigning 25 sewing patterns that are most frequently used to those pattern keys. s many as 20 different cycle sewing patterns, each of which combines a maximum of 30 different sewing patterns, can be stored in the memory. The operation panel has been installed at an angle and can be placed at the top, bottom, right or left part of the table according to the operator's preference. IP-200 large color LCD touch panel has been adopted for the display. It gives clear displays that allow the operator to understand operating procedures. The IP-200 panel can be connected to a personal computer and can store data on martmedia. This allows data to be exchanged or shared among sewing machines installed in a factory or among remote factories. The IP-200 panel has been provided with a process improvement supporting feature through the indication of the operational state of the sewing machine, and a maintenance and management feature for indicating the needle changing timing and cleaning timing. LK-1903-/Installation of the IP-200 LK-1903, LK-1903/R35 (eptember, 2003) 4/4

102 Computer-controlled, High-speed, artacking Machine LK-1900 The machine achieves the world's highest sewing speed of 3,000rpm. In addition to the high-speed sewing performance, the machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time (reduced approximately 30% compared to our predecessor model: For 42-stitch large bartacks). The machine comes with a newly developed needle thread grasping mechanism. The mechanism prevents thread from slipping off from the needle eyelet at the beginning of sewing, from tangling on the wrong side of the material and also being stained during sewing. The thread trimming mechanism has been further improved to shorten the length of thread remaining on the wrong side of the material after thread trimming. With its 30mm (length) by 40mm (width) sewing area, the machine can sew many different shapes of bartacks. The machine is provided as standard with as many as 50 different types of sewing patterns including semilunar bartacking, round bartacking, radial tacking as well as conventional bartacks. The machine is provided as standard with the active tension (electronic thread tension control mechanism). ince the machine is provided with an active tension mechanism, it is able to set a needle thread tension that matches various sewing conditions (such as thread, material and sewing speed) on the operation panel, store the data in memory and reproduce it. The machine is provided as standard with an auto-lifter that uses a new stepping-motor system. This helps reduce operator fatigue. Computer-controlled, High-speed artacking Machine for Eyelet uttonholes LK-1901 The machine is provided with a material-drawing mechanism which draws the right and left parallel portions of an eyelet buttonhole near to one another. The machine performs bartacking with the right and left parallel portions of the eyelet buttonhole drawn near to one another after the buttonhole is clamped under the work clamp foot, thereby finishing highly durable and well-tensed eyelet buttonholes. Three different sewing patterns (21-, 36- and 48-stitch bartacking) are prepared to enable easy switchover of sewing sizes. If the sewing patterns are assigned to the pattern keys on the operation panel, the sewing patterns can be called up or changed with single-key operation. The machine sews the most optimally suited bartacks on eyelet buttonholes on the front bodies of garments and straight buttonholes that differ in stitch number and size on jacket lapels, thereby improving the finished quality of sewing products. The material drawing amount can be adjusted to 3mm at maximum. The material drawing mechanism can be switched ON/OFF in accordance with the setting of the memory switch. With these features, the material drawing mechanism can be used with greater flexibility. Computer-controlled, High-speed elt-loop-attaching Machine LK-1902 The machine is provided as standard with six different linear bartacking patterns. ince the sewing size can be easily changed, the optimal number of stitches and sewing size can be speedily selected according to the belt-loop width. If the normally used patterns are assigned to the patterns keys, a desired pattern can be called up or changed with singlekey operation. With its broadly curved feed bracket (presser arm), the machine permits easy placement of the material to be sewn. The slimly shaped bed and head design that allows free space under the arm demonstrates greater operability in handling materials on the machine and continuous processes. These features contribute substantially to increased productivity in beltloop attachment processes. LK LK-1900-F LK LK LK-1900, 1901, 1902 (eptember, 2003) 1/7 8

103 PECIFICTION Model name LK LK-1900-H LK-1900-F LK-1900-M LK-1900-W pplication With large hook For heavy-weight For knits and For foundation for heavy-weight materials knitted materials materials Max. sewing speed 3,000rpm 2,700rpm ewing area 30mm (L)40mm (W) titch length 0.110mm (0.1mm step) Needle bar stroke 41.2mm Lift of the work clamp foot 14mm (17mm when the reverse-rotation needle-up function) uto-lifter Provided as standard (stepping motor type) Needle thread tension ctive tension (electronic thread tension control system) Needle (at the time of delivery) DP5 (#14) DP17 (#21) DP5 (#11) DP5 (#11) DP17 (#21) Hook shuttle hook Large shuttle hook Number of stitches that can be stored in memory Number of standard patterns Number of data that can be input Enlarging/Reducing facility Memory medium obbin thread counter Lubrication Lubricating oil ewing machine motor Power consumption Weight Max. 20,000 stitches 50 patterns 200 patterns ( For up to 150 patterns, sewing data can be added.) 20200% (1% step), Pattern enlargement/reduction can be done by increasing/decreasing the stitch length EEP-ROM, EP-ROM Provided as standard (Up/Down method) Hook: minute-quantity lubrication JUKI New Defrix Oil No.2 (equivalent to IO VG32) 450W compact C servomotor (direct-drive system) 320W Machine head (include motor) 42kg, Control box 16.5kg Model name Eyelet buttonhole elt-loop attaching machine bartacking machine LK LK LK-1902-H pplication For heavy-weight materials Max. sewing speed 3,000rpm ewing area 30mm (L)40mm (W) titch length 0.110mm Needle bar stroke 41.2mm Lift of the work clamp foot 14mm (by using the reverse-rotation needle-up function 17mm) uto-lifter Provided as standard (stepping motor type) Needle thread tension ctive tension (electronic thread tension control mechanism) Needle (at the time of delivery) DP5 (#16) DP5 (#16) DP17 (#21) Hook shuttle hook Number of stitches that can be stored in memory pplicable pattern number 11, 12, 13 Number of data that can be input Enlarging/Reducing facility Max. 20,000 stitches 17, 18 (19, 20, 21, 22*) *This device has been factory-set to invoking prohibited status at the time of delivery. 200 patterns ( For up to 150 patterns, sewing data can be added.) 20200% (1% step), Pattern enlargement/ reduction can be done by increasing/decreasing the stitch length Memory medium EEP-ROM, EP-ROM Material drawing amount Max. 3mm obbin thread counter Provided as standard (Up/Down method) Lubrication Hook: minute-quantity lubrication Lubricating oil JUKI New Defrix Oil No.2 (equivalent to IO VG32) ewing machine motor 450W compact C servomotor (direct-drive system) Power consumption 320W Weight Machine head (include motor) 42kg, Control box 16.5kg LK-1900, 1901, 1902 (eptember, 2003) 2/7

104 TLE OF THE TNDRD PTTERN No. titch diagram Number of stitches ewing size (mm) (Note 2) No. of work clamp foot No. titch diagram Number of stitches ewing size (mm) Lengthwise Crosswise Lengthwise Crosswise (Note 2) No. of work clamp foot Linear bartacking Large bartacking (Note 3) Lengthwise bartacking (Top) (ottom) (Top) (ottom) (Top) (ottom) , (Top) (ottom) (Top) (ottom) mall bartacking Lengthwise linear bartacking (Top) (ottom) (Top) (ottom) (Top) (ottom) Large bartacking (Note) 1. ewing size shows the dimensions when the scale rate is 100%. 2. Refer the No. of work clamp foot to the separate table of work clamp foot. 3. For No. 22, modify the work clamp foot blank for use. 4. Use the patterns withmarks for sewing denim. 5. Presser foot attached with a sign is available by special order. LK-1900, 1901, 1902 (eptember, 2003) 3/7

105 No. titch diagram Number of stitches ewing size (mm) (Note 2) No. of work clamp foot No. titch diagram Number of stitches ewing size (mm) Lengthwise Crosswise Lengthwise Crosswise (Note 2) No. of work clamp foot Knit goods bartacking Large size bartacking emilunar bartacking Lengthwise bartacking Round bartacking Radial tacking LK-1900, 1901, 1902 (eptember, 2003) 4/7

106 TLE OF THE WORK CLMP FOOT No. of work clamp foot (asm.) (asm.) (asm.) Work clamp foot (without knurl) (without knurl) Feed plate pplication code F F H M Finger guard Remarks accessory for (standard) type machine head. Option (3) accessory for F (foundation) type machine head. (1) Option 11.4 accessory for M (knit and knitting fabric) type machine head. 8 No. of work clamp foot (asm.) (asm.) (asm.) (asm.) (Light) (Left) Work clamp foot Feed plate (without knurl) (without knurl) (without knurl) (without knurl) pplication H F F F F code Finger guard accessory for For lengthwise bartacking (packed together H (heavy-weight Remarks Option material) type Option Option with accessories Option Option machine head. (2) supplied with F-type machine head) (1) For JE: (1) Option (2) Packed together with accessories supplied with F-type machine head. (3) accessory for F (foundation) type machine head. Install a finger guard suitable for each work clamp foot when replacing the work clamp foot. LK-1900, 1901, 1902 (eptember, 2003) 5/7

107 WORK CLMP FOOT ND FEED PLTE FOR LK-1902 (for belt-loop attaching) Work clamp foot Feed plate Number of pattern Provided as standard 17 LK LK-1902-H Option For large size Option For extra large size finger guard is included in the presser foot OPERTION PNEL (You can choose operation panel.) TNDRD PNEL Functional settings, such as pattern numbers, enlargement/reduction scales, swing speeds and needle thread tensions can be established through the operation panel with ease. sewing patterns can be assigned to pattern keys P1 to P50. ny of the sewing patterns assigned to the P1 to P25 pattern keys can be activated with a touch of the corresponding key. This means that workability is improved by assigning 25 sewing patterns that are most frequently used to those pattern keys. s many as 20 different cycle sewing patterns, each of which combines a maximum of 30 different sewing patterns, can be stored in the memory. The operation panel has been installed at an angle and can be placed at the top, bottom, right or left part of the table according to the operator's preference. IP-200 large color LCD touch panel has been adopted for the display. It gives clear displays that allow the operator to understand operating procedures. The IP-200 panel can be connected to a personal computer and can store data on martmedia. This allows data to be exchanged or shared among sewing machines installed in a factory or among remote factories. The IP-200 panel has been provided with a process improvement supporting feature through the indication of the operational state of the sewing machine, and a maintenance and management feature for indicating the needle changing timing and cleaning timing. LK-1900-/Installation of the IP-200 LK-1900, 1901, 1902 (eptember, 2003) 6/7

108 TLE OF THE OPTIONL PRT Name of parts Feed plate blank Type Without knurl Part No Foot pedal for standing work (optional) With knurl t=1.2 Without knurl/stainless steel t= Work clamp foot face plate (asm.) Face plate for presser blank Presser blank With knurl/processed (right) t=3.2 With knurl/processed (left) Needle hole guide Finger guard (1) =1.6 =2.6 With relief slit type =1.6 =2.0 Without relief slit F and M types =2.3 =4.0 Without relief slit for heavy-weight material =2.7 =3.7 Without relief slit for extra heavy-weight material =56.5 = D C D2426MMCK pedal unit for standing work [Part No. M ] Pedal switch conversion cable asm. [Part No. M ] 8 =59 =74 For extra-large bartacking Finger guard (2) =66.5 =43 For lengthwise bartacking PK-57 [Part No. GPK ] Finger guard (3) M TP =21.5 =35.5 For specially ordered work clamp Pedal switch conversion cable asm. [Part No. M ] To connect the cable asm. to the electrical box, conversion cable (separately available) is necessary. WHEN YOU PLCE ORDER Machine head Control box (artacking) LK Operation panel panel IP-200 P pplication For heavy-weight materials For foundation For knits and knitted materials With large hook for heavy-weight materials (Eyelet buttonhole bartacking) Work clamp foot H F M W LK ttachment Not provided 000 MC596 Power supply 3-phase V E ingle-phase V CE V (not provided with power switch) K N pplication Work clamp foot ttachment Not provided 000 (elt-loop attaching) LK pplication For heavy-weight materials H Work clamp foot ttachment Not provided 000 LK-1900, 1901, 1902 (eptember, 2003) 7/7

109 High-speed, 1-needle, Cylinder-bed Lockstitch artacking Machine LK-1850 ERIE In addition to the capability of low-tension stitching, the prevention of loose stitches at the start and end of sewing using synthetic threads is assured. The use of JUKI s unique thread trimming system, coupled with the low-tension sewing capability, have further upgraded the sewing performance. The formation of even stitches of high quality is assured regardless of the type or size of threads used. The lower clamping plate has been flattened and the feed cam has been made compact by limiting the sewing size and the number of stitches. The result is a wider sewing area. Furthermore, the work clamp foot lift is as high as 17mm. y these improvements, a workpiece can be handled more easily without concern about the workpiece becoming caught in the cam. The machine features a higher sewing speed and shortened cycle time, and is provided with a new smooth thread winder. The machine has various other improvements that lead to higher efficiency, including a pedal that requires low pedaling pressure, a work clamp foot that ensures free finger action, and a face plate that allows the needle entry point to be seen at a glance. PECIFICTION LK Model name Max. sewing speed Needle bar stroke Lift of the work clamp foot Needle (at the time of delivery) Hook Feed mechanism titch adjusting system Thread trimming system Wiper Lubrication Lubricating oil Weight of the machine head Motor LK-1850 series 2,300rpm (1,800rpm for synthetic thread) 41.2mm Max. 17mm DP5 (#16) #11#16, For JE: 134 (Nm100) Nm75Nm160 <H, G type> Di3 #23, For JE: 332 Nm160 shuttle hook Cam control system Provided with a nut-fixed feed adjusting lever Thread spreader interlocked with main shaft and thread trimmer interlocked with foot lifter Interlocked with lifter Centralized oil wick lubrication JUKI New Defrix Oil No. 2 (equivalent to IO VG32) 42.5kg ingle-phase/3-phase 200W (1/4 HP) induction motor WHEN YOU PLCE ORDER LK185 U Number of stitches 42 stitches 28 or 14 stitches 36 stitches 42 or 21 stitches pplication For heavy-weight materials For extra heavyweight materials H G Pedal One-pedal unit (provided with a pedal- pressure-decreasing unit) Two-pedal unit (provided with a pedal-pressure-decreasing unit) Two-pedal unit T P ubclass number Refer to the subclass machines list *1. Pedal-pressure-decreasing unit: It mechanically actuates the pedal, to reduce operator's fatigue in raising the work clamp foot, etc. ince this is a mechanical feature, the operator cannot stop the work clamp foot at its intermediate position or lower it slowly. *2. P type unit: The work clamp foot is raised or lowered by the lever system in accordance with the amount of pedal depression. This feature is very advantageous for a process that requires accurate positioning of the material. 2-pedal system Work clamp foot lifting pedal tarting pedal () 1-pedal system Neutral Lowering the work clamp foot tarting the sewing machine LK-1850 ERIE (eptember, 2003) 1/4

110 UCL MCHINE LK-1850 series of bartacking machines Model Name Number of stitches titch diagram Lengthwise (min. max.) ewing size (mm) Crosswise (min. max.) Max. sewing speed (rpm) Needle LK ,300 LK Large size bartacking machine (1.53) 16 (816) 2,300 DP5 #14, # Nm160 LK ,300 LK Extra large bartacking machine 42 3 (1.53.5) 24 (1224) 2,300 DP5 #14, # Nm160 LK LK mall size bartacking machine (1.53) 8 (48) 2,300 2,300 DP5 #14, # Nm160 LK ,300 LK Eyelet buttonhole bartacking machine (1.53) 6 (48) 2,300 DP5 #14, # Nm160 LK ,300 LK ,000 LK Knit goods bartacking machine 21 2 (1.33) 6.5 (48) 2,000 DP5 # Nm75 LK ,000 LK Crosswise straight-line label-attaching machine 21 (former part of stitch) (latter part of stitch) 0 34 (2434) 2,000 DP5 # Nm160 LK emicircular bartacking machine 42 7 (67) 10 (8.610) 2,000 DP5 # Nm75 LK (6.514) 2,300 LK LK elt-loop attaching machine (6.514) 25 (1325) 2,300 2,300 DP5 #14, # Nm160 LK (1825) 2,300 LK-1850 ERIE (eptember, 2003) 2/4

111 PPLICTION LK-1850 LK LK LK Large bartacking for men's wear, ladies' wear, children's wear, work wear, jeans, etc. Various types of extra large bartacking LK LK mall size bartacking for men's wear, coats, etc. LK LK LK artacking eyelet buttonholes for men's wear, ladies' wear, school uniforms, coats, etc. 8 LK LK LK artacking for light-weight materials, including knit underwear. LK ttaching various kinds of labels. LK ttaching straps to ladies' under gaments and semicircular bartacking on them. LK Various kinds of extra large bartacking. LK LK ttaching belt-loops to various trousers and slacks. LK LK ttaching wide belt-loops to jeans, etc. LK-1850 ERIE (eptember, 2003) 3/4

112 UCL MCHINE LK-1850H/1850G series of bartacking machines Model Name Number of stitches titch diagram Lengthwise standard (Min. Max.) ewing size (mm) Crosswise standard (Min. Max.) Max. sewing speed (rpm) Needle LK-1850H 42 2,000 LK-1852H-5 Large size bartacking machine for heavy-weight materials 28 3 (1.53) 16 (816) 2,000 Di3 # Nm160 LK-1853H ,000 LK-1854H-24 Extra large bartacking machine for heavy-weight materials 42 3 (1.53) 24 (1224) 2,000 Di3 # Nm160 LK-1850G 42 2,000 LK-1852G-5 Large size bartacking machine for extra heavyweight materials (1.53.5) 16 (816) 2,000 Di3 # Nm160 LK-1853G ,000 LK-1854G-24 Extra large bartacking machine for extra heavyweight materials (1.53.5) 24 (1224) 2,000 Di3 # Nm160 PPLICTION LK-1850H LK-1852H-5 LK-1853H-15 Large-size bartacking for heavyweight materials, including jeans. LK-1854H-24 Extra large bartacking for heavyweight materials, including jeans. LK-1850G LK-1852G-5 LK-1853G-15 Extra large bartacking for extra heavy-weight materials, including extra heavy jeans. LK-1854G-24 Extra large bartacking for extra heavy-weight materials, including extra heavy jeans. LK-1850 ERIE (eptember, 2003) 4/4

113 Computer-controlled, High-speed hape-tacking Machine ewing area: 60mm (L)100mm (W) LK-1910 LK-1920 (with intermediate presser) The machine can shape tack at a maximum sewing speed of 2,500rpm, dramatically reducing the cycle time. With this feature, the LK eries models provide upgraded sewing capabilities such as improved responsiveness to heavy-weight materials. elect either type(standard type) or H type(for heavy-weight materials) to suit the use of your machine. ettings for machine functions such as the sewing speed and bobbin thread count can be easily adjusted via the operation panel, and cycle sewing programs for the production of combined patterns can be entered. The machine is provided as standard with an intermediate presser to prevent the material from flagging, thereby promising beautiful seams. ince height and stroke of the intermediate presser can be adjusted, quick responsiveness to changes of material thickness or the number of layers of materials is ensured. (LK-1920) LK-1920 LK-1930 (with intermediate presser and pattern programming function) The LK-1930 is provided with pattern programming function equivalent to that equipped in the M-210D computer-controlled cycle machine. With its larger storage capacity, the machine supports diversified sewing patterns. In addition, the sewing machine functions and patterns can be programmed through the operation panel. With its automatic correction feature, the machine can enlarge/reduce patterns without deforming them. mple storage capacity: maximum of 360,000 stitches/691 patterns on one floppy disk. n EEP-ROM may be used. maximum of 20,000 stitches can be input per pattern. With this large storage capacity, the machine supports embroidery patterns with large numbers of stitches. PECIFICTION LK pplication Model name Max. sewing speed ewing area titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Needle (at the time of delivery) Hook Feed motion work clamp foot Number of stitches that can be stored in memory Number of patterns that can be input Input function Enlarging/Reducing facility Memory medium obbin thread counter Lubrication Lubricating oil ewing machine motor Power consumption Weight LK-1910 DP5 (#14) LK-1910H LK-1920 LK-1920H LK-1930 LK-1930H For heavy-weight For heavy-weight For heavy-weight materials materials materials 2,500rpm (when stitch length is 3mm or less) 60mm (L)100mm (W) 0.110mm mm 41.2mm Max. 22mm (electromagnetic), Max. 25mm (pneumatic) DP17 (#18) DP5 (#14) DP17 (#18) DP5 (#14) DP17 (#18) Max. 10,000 stitches 64 patterns Not provided 20200% (1% step) (by increasing/decreasing the stitch length) EEP-ROM Provided as standard Centralized oil wick lubrication JUKI New Defrix Oil No.2 (equivalent to IO VG32) 400W compact C servomotor (direct-drive system) ingle-phase, 3-phase 600W Machine head (include motor) 46kg, control box 16.5kg 18mm 4mm (0mm and 410mm) Double-capacity shuttle hook R-theta intermittent feed (2-shaft drive by stepping motor) Max. 360,000 stitches (Max. 20,000 stitches/pattern) 691 patterns Provided as standard 1400% (0.1% step) (by increasing/decreasing the stitch length or the number of stitches) 2DD/2HD 3.5 micro-floppy disk (EEP-ROM can also be used.) Machine head (include motor) 46kg, control box 18kg LK-1910, 1920, 1930 (eptember, 2003) 1/3

114 WHEN YOU PLCE ORDER Machine head LK19 Z Model Intermediate presser Not provided Provided Provided Input function Not provided Not provided Provided pplication For heavy-weight materials H Feeding frame Magnet-driven feeding frame Pneumatic separately driven feeding frame ubclass ubclass Control box MC59 Control box Pedal switch For LK-1910/LK pedal unit F For LK pedal unit PK 3-pedal unit (PK47) D pecification For LK-1910: magnet-driven feeding frame Control box 1 elect "F" for the magnet-driven feeding frame, select and "" or "D" for the pneumatic-driven feeding frame. For LK-1910: pneumatic separately driven feeding frame For LK-1920: magnet-driven feeding frame For LK-1920: pneumatic separately driven feeding frame For LK-1930: magnet-driven feeding frame For LK-1930: pneumatic separately driven feeding frame Table stand: optional JTK MC-592 MC ingle-phase 3-phase ingle-/3-phase Power supply V V V V V V for CE (not provided with power switch) C K R D L M Table stand For LK-1910/1920: magnet-driven feeding frame For LK-1910/1920: pneumatic separately driven feeding frame For LK-1930: magnet-driven feeding frame For LK-1930: pneumatic separately driven feeding frame The table stand is not equipped with casters. For the table stand (for the magnet-driven feeding frame, No. 38 and 40), two pedals (starting pedal and manual pedal) are packaged together LITING OF DT THT CN E RED IN Models used For LK-1910 LK-1920 FEEDING FRME INTERCHNGEILITY LK-1910, 1920, 1930 (eptember, 2003) 2/3 Memory medium For LK-1930 Pattern data For LK-1900 : Data that can be read in : Data that cannot be read in For M-206C For M-210C (Resolution: 0.16mm) For M-210C M-210D EEP-ROM 3.5FD EEP-ROM EP-ROM EEP-ROM 3.5FD 3.5FD LK-1910/1920 LK-1930 Models used LK-1910/1920/1930 Part name Feeding frame The above listing indicates interchangeability without the use of conversion software such as PGM-20. LK-1910/1920 /1930 For LK-1900 Model name For M-206C : Interchangeable : Not interchangeable For M-210C (Resolution: 0.16mm) For M-210C M-210D Feed plate The memory switch setting has to be changed (the location of the origin has to be changed).

115 OPTION Model Part No. Description Feature PGM-20 FU02L Programming software for computer controlled sewing machine Pneumatic inverted clamp device Needle cooler Use the PGM-20 software (separately available) for creating pattern data. With the programming software, data can be created in an interactive processing manner using a general-purpose personal computer or ROM writer. The device is best-suited to attaching small articles such as labels and emblems by sewing the entire circumference. The needle cooler blows air to the needle, thereby preventing thread breakage caused by hot needle T E PV Thread tension controller No. 3 ir tube olenoid valve The tension controller unit is used to partially change the needle thread tension during the sewing of a pattern P2 olenoid valve connector asm. Thread-tension-releasing device ilicon oil tank etscrew This device requires if you want to change the sewing position without performing thread trimming. This device prevents breakage of synthetic threads. PK-57 GPK M E D D D0C D0E D0F 1-pedal unit for standing work Junction cable Clamp =2.2, =3.6, C=38.5 (standard) =2.7, =4.1, C=38.5 =3.5, =5.5, C=38.5 =1.6, =2.6, C=37 =2.2, =3.6, C=41.5 Intermediate presser (LK-1920, LK1930) C D D D D D0C D M D C00 Without knurl With knurl Without knurl With knurl (right) With knurl (left) Without knurl With knurl =1.6, =2.6 type Without relief slit =2.3, =4.0 H type Without relief slit =1.6, =2.0 Without relief slit For fashion and knit garment Monolithic feeding frame blank eparately driven feeding frame blank Feed plate Needle hole guide D D2426-MMC-K0C =2.0, =3.0 Without relief slit =2.5, =3.5 Without relief slit =3.0, =4.0 Without relief slit LK-1910, 1920, 1930 (eptember, 2003) 3/3

116 Computer-controlled hape-tacking Machine with Full-rotary 3 fold-capacity Hook ewing area: 60mm (L)100mm (W) (for extra heavy-weight materials with heat cutter) (for heavy-weight materials with intermediate presser) (for extra heavy-weight materials with intermediate presser) LK-1941Z LK-1942H LK-1942G With its new electronic feed system, the operator can select and use the sewing pattern entered. When changing a sewing pattern, the conventional mechanical bartacking machine requires the replacement of a feed cam. ince the new electronic machine no longer uses a feed cam, this operation is no longer necessary and costs are substantially saved. The machine demonstrates a high-speed sewing capability of up to 2,200rpm and dramatically increased productivity. The machine is equipped as standard with a full-rotary 3 fold-capacity hook. The hook reduces the frequency of the bobbin thread replacement, enhancing efficiency in sewing with thick thread. The following features promise improved sewing capabilities for extra heavy-weight materials: highpower, direct-drive motor that drives the needle with increased material-penetrating force; a higher-torque stepping motor that increases the feed efficiency, and a pneumatic work clamp that increases the material clamping force. LK-1941 The thread trimmer offers outstanding reliability and durability. The ideal application for the device is the sewing of seatbelts with thick synthetic threads. Unlike the thread trimmer using a knife, the heat cutter trims thick thread without fail and shortens the thread remaining at the seam end. It also offers improved durability to cut down on maintenance requirements. The heat cutter is designed to leave no thread chips on the hot wire section. This ensures consistent thread trimming at all times. LK-1942 y equipping the LK-1942 as standard with an intermediate presser to prevent the material from flopping, beautifully finished seams are almost guaranteed. The height and stroke of the intermediate presser are both adjustable. LK-1941Z LK-1941Z LK-1942G 8 LK-1942H LK-1941Z, 1942H, LK-1942G (eptember, 2003) 1/3

117 PECIFICTION Model name pplication Max. sewing speed ewing area titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Heat cutter Needle that can be trimmed Needle (at the time of delivery) Hook Feed motion work clamp foot Number of stitches that can be stored in memory Number of patterns that can be input Enlarging/Reducing facility obbin thread counter Memory medium Lubrication Lubricating oil Compressed air and air consumption ewing machine motor Power consumption Weight LK-1941Z For extra heavy-weight materials LK-1942H For heavy-weight materials LK-1942G For extra heavy-weight materials 2,200rpm (when stitch length is 3mm or less) 60mm (L)100mm (W) 0.110mm 41.2mm Max. 25mm 18mm 4mm (0mm and 410mm) Provided as standard Option ynthetic only: #8# /38/3 DP17 (#25) #24#26 Heater unit 3.5kg #30# /330/3 DP17 (#18) #18#20 Full-rotary 3 fold-capacity hook R-theta intermittent feed (2-shaft drive by stepping motor) Max. 10,000 stitches 64 patterns 20200% (1% step), by increasing/decreasing the stitch length Provided as standard EEP-ROM Centralized oil wick lubrication JUKI New Defrix Oil No.2 (equivalent to IO VG32) 0.5MPa (5kgf/cm 2 ), 1.3N /min 480W compact C servomotor (direct-drive system) ingle-phase, 3-phase 600W Machine head (include motor) 46kg, Control box 16.5kg #8# /310/3 DP17 (#23) #21#23 WHEN YOU PLCE ORDER Machine head (with heat cutter, without intermediate presser) (without heat cutter, with intermediate presser) LK1941Z Z LK1942 Z pplication ubclass pplication ubclass For extra heavyweight materials with heat cutter Z ubclass For heavy-weight materials For extra heavy-weight materials H G ubclass Control box MC594 F JTK35 Table stand: optional The table stand is not equipped with casters. pecification Power supply Pedal switch With heat cutter (for LK-1941) 1 ingle-phase V K 1-pedal unit F Without heat cutter (for LK-1942) 2 3-phase V V D L ingle-/3-phase V for CE (not provided with power switch) M LK-1941Z, 1942H, LK-1942G (eptember, 2003) 2/3

118 OPTION Model Part No. Description Feature PGM-7 Handy programming device ewing patterns can be entered or modified through the handy programming device while holding it. Dedicated keys for frequently-used functions are provided on the handy programming device to cut down the operation time Needle cooler The needle cooler blows air to the needle, thereby preventing thread breakage caused by hot needle Heat cutter The heat cutter cuts both needle threads and bobbin threads (#1 to #8 synthetic thread,) under the throat plate. (For the LK-1941 model, the heat cutter is equipped as standard.) Thread tension controller No. 3 T E PV P ir tube olenoid valve olenoid valve connector asm. ilicon oil tank etscrew Thread clamp device Thread-tension-releasing device The tension controller unit is used to partially change the needle thread tension during the sewing of a pattern. This device prevents breakage of synthetic threads. The device prevents stitch skipping and slip-off of the thread from the needle eyelet at the beginning of sewing. Designed with a mechanism to clamp the needle thread under the throat plate, the thread clamp device never interferes with the presser foot or other devices mounted on the machine. This device requires if you want to change the sewing position without performing thread trimming. (Only applicable to the LK-1942H) 8 PK-47 GPK M pedal unit Junction cable This 3 pedal unit is required if you want to use a double-step feeding frame Feed plate, blank elt positioning guide M C2 etscrew WP C2 Washer of setscrew for guide Work clamp foot (right) Work clamp foot (left) D0 Without knurl D0 With knurl D0 Without knurl D0 With knurl (right) D0C With knurl (left) Without knurl With knurl Wiper Wiper base =3.0, =4.0 *H type For mechanical thread trimmer =4.0, =5.0 *G type For mechanical thread trimmer =34.4 (ellipitical), =5.0 *Z type (standard) For heat cutter (for seatbelts) =2.0, =3.0 For mechanical thread trimmer =2.3, =3.3 For mechanical thread trimmer =34.4 (ellipitical), =5.0 For mechanical thread trimmer (for seatbelts) =3.0, =4.0 For heat cutter =4.0, =5.0 For heat cutter Work clamp, blank for seatbelts Knurled blank, designed for seatbelts, for machining that prevents slippage of material more effectively than the standard one. djustable belt positioning guide can be used. Monolithic feeding frame blank eparately driven feeding frame blank Feed plate Reverse sweeping wiper In some sewing processes, the wiper may interfere with the needle when it actuates. In such a case, the wiper can be placed at the retracted position. Needle hole guide LK-1941Z, 1942H, LK-1942G (eptember, 2003) 3/3

119 Computer-controlled, High-speed, Lockstitch uttonholing Machine LH-1790 The hollowed type frame promises efficient sewing of vertical buttonholes. The machine can be operated with its head positioned horizontally. Needle thread tension for sewing parallel and bartacking sections of buttonholes can be separately controlled through the operation panel and stored in memory according to various sewing conditions (e.g., type of thread, type of material and sewing speed). Thanks to our advanced dry-head technology, no lubrication is required except for the hook section. This eliminates oil stains on the sewing product. PECIFICTION LH-1790 ewing speed Needle bar stroke ize of cloth cutting knife artacking width uttonhole length Precision of needle throwing mechanism Needle thread tension Number of stitches Needle (at the time of delivery) Hook Lift of the work clamp uto-lifter Needle throwing drive system Cloth feeding knife drive system Cloth cutting knife drive system Number of standard patterns Number of patterns that can be input obbin thread winder Machine head drive system Power requirement/ Power consumption Lubrication Lubricating oil Total weight WHEN YOU PLCE ORDER Max.: 4,200rpm, Normal: 3,600rpm When the non-lubricated hook (optional) is used: 3,300rpm 34.6mm mm (1/4"1-1/4") Max. 5.0mm (with special-specification part: Max. 10mm*) Max. 41mm (optional: 70mm, 120mm) 0.05mm ctive tension (electronic thread tension control system) utomatically computed from the size of the buttonhole and stitch pitch DP5 (#11J) #11J#14J DP type, full-rotary hook Non-lubricated hook (optional) 14mm (17mm when the reverse-rotation needle-up function is used) Provided as standard (stepping motor type) Driven by stepping motor Intermittent feed by stepping motor y double-acting solenoid 30 patterns Max. 99 patterns uilt-in the machine head Compact C servomotor (direct-drive system) ingle-phase 220V, 230V, 240V3-phase V/600V Only the hook section needs a minute-quantity lubrication. No lubrication is required when the non-lubricated hook (optional) is used. Hook: JUKI New Defrix Oil NO.1 (equivalent to IO VG7) 112kg The special-specification part is available on a special order. Contact our branch or office in your area. 9 [Machine head] LH1790 [Control box] MC601 Model Type Power supply Operation panel Knife width ingle-phase V K panel mm 0 3-phase V E IP-200 P For CE ingle-phase (Not provided with power switch) 230V N LH-1790 (eptember, 2003) 1/4

120 The machine is provided as standard with as many as 30 stitch patterns for buttonholing. qquare wround eradial square rradial tradial straight bartacking yradial taper bartacking ueyelet square ieyelet radial oeyelet straight bartacking!0eyelet taper bartacking!1emilunar!2round square!3emilunar square!4emilunar straight bartacking!5emilunar taper bartacking!6eyelet semilunar!7eyelet round!8quare radial!9quare straight taper @8artacking, right left cut #0artacking, center cut OPERTION PNEL (You can choose operation panel.) TNDRD PNEL ll kinds of data can be entered on or selected from the operation panel. Various data, such as pattern numbers and stitch shapes are indicated on the LCD section with easy-to-understand pictographs. IP-200 large color LCD touch panel has been adopted for the display. It gives clear displays that allow the operator to understand operating procedures. The IP-200 panel can be connected to a personal computer and can store data on martmedia. This allows data to be exchanged or shared among sewing machines installed in a factory or among remote factories. The IP-200 panel has been provided with a process improvement supporting feature through the indication of the operational state of the sewing machine, and a maintenance and management feature for indicating the needle changing timing and cleaning timing. Communication screen martmedia card Connected to a personal computer LH-1790 (eptember, 2003) 2/4

121 OPTION Cloth cutting knife, Work clamp Cloth cutting knife Work clamp Mark Work clamp foot Knife size Part No. 6.4mm (1/4") F00 F 9.5mm (3/8") K00- K 11.1mm (7/16") I00 I 12.7mm (1/2") L00- L 14.3mm (9/16") V00 V 15.9mm (5/8") M00- M 17.5mm (11/16") mm (3/4") N00 N 22.2mm (7/8") P00 P 25.4mm (1") Q00- Q 31.8mm (1-1/4") For stitch width 5mm () Part No. Mark (Length of cloth cutting knife) <Type> Factory installed on machineupplied as an accessory (For LH-1790) Throat plate For needle throwing width Part No. (Marking: ) 5mm (5: mm) 6mm (6: mm) Factory installed on machine ( mm) <1> (425mm) ( mm) <2> (535mm) ( mm) <3> (541mm) For stitch width 6mm () Part No. (Length of cloth cutting knife) <Type> Part No. <Type> Designation Part No. Name of part Features RP hook (asm.) y the installation of non-lubricated hook, Non-lubricated hook RP bobbin case the machine is changed to be a fully dryhead machine. (In this case, the Hook sleeve (asm.) TP crews maximum sewing speed will be 3,300rpm.) Work clamp arm spacer M TP (3 pcs.) crews Work clamp foot 70 (asm.) Work clamp 70 Exclusive to 70mm Urethane work clamp 70 electable Flat work clamp 70 Work clamp Work clamp foot 120 (asm.) (For sewing length of 70 mm, 120mm) Work clamp Work clamp arm Cloth feeding plate Close cam Lifting plate 120 M P (2 pcs.) crews P (2 pcs.) crews G Electric bobbin winder (asm.) Electric bobbin winder Power cord (asm.) Tension controller (asm.) K C (4 pcs.) Wood screws 2-pedal unit for standing work GPK Pedal switch (asm.) Junction cable (asm.) ( mm) <3> (641mm) Exclusive to Common to 70 mm and 120 mm D K0 <1> D K0 <2> D K0 <3> P (2 pcs.) The work clamp is applicable to the sewing length of 70mm or 120mm. With this work clamp, holing of belt holes in child seat is possible. It is a device for winding bobbin separately. 9 Non-lubricated hook obbin case Hook (asm.) Hook sleeve LH-1790 (eptember, 2003) 3/4

122 Explanation of pedal motion Pedal motion Initial position etting of sewing product tart of sewing End of sewing wintermediate position Pedal type 2-pedal 1-pedal 1-pedal (without intermediate position) (with intermediate position) Presser goes up as high as the pedal toe down amount of the left side pedal. Presser comes down when the left side pedal is depressed. eewing position The right side pedal is depressed. wpresser automatically goes up to intermediate position. qmaximum position The first step of the right side pedal eewing position The second step of the right side pedal qpresser automatically goes up to maximum position. qmaximum position The first step of the right side pedal wintermediate position The second step of the right side pedal eewing position The third step of the right side pedal qpresser automatically goes up to maximum position. Work clamp position qmaximum position wintermediate position Cloth eewing position 17mm LH-1790 (eptember, 2003) 4/4

123 1-needle, Lockstitch uttonholing Machine LH-780 ERIE The buttonholing position can be easily adjusted. This further enhances ease of operation. newly introduced mechanism in the needle thread trimmer prevents interference with the positioning of buttonholes. The shape of the face plate is designed to provide sufficient clearance around the needle entry position. s a result, ease of operation is further improved. The work clamp can be lifted as high as 12mm. The machine is capable of sewing heavy-weight materials such as bulky knits. The maximum lift of the work clamp is 12mm, enabling the machine to make high-quality buttonholes in heavy-weight materials. The knife mechanism and stop-motion mechanism produce less noise when they actuate, thus contributing to a more comfortable working environment. Thanks to the simple design of the stop-motion mechanism and unique knife mechanism, the machine operates with low noise. The machine starts, decelerates and stops smoothly. LH-782 LH-780NV (for double-stitching with gimp) LH-780N (for double-stitching with gimp and gimp cutter) The machine neatly tucks in tetron gimps with consistency. Thanks to the improved locus of the gimp guide, the machine is flexibly adaptable to changes in the types of gimps to be used, easily switching operation to accommodate one to three pieces of tetron thread, or one sewing thread and one span thread. In addition, the gimp guide is designed so that it shifts vertically. This means that the relation between the needle and the gimp guide is uniform even if the material thickness varies, thus allowing the machine to tuck in gimps with consistency. machine is designed for sewing soft-to-the-touch circular bartacks. It has been developed to sew circular bartacks on ladies' wear, a process that requires a very delicate finish. The gimp cutter dramatically promotes lobor-saving. (N type) The length of remaining gimp after its trimming is only about 2mm. This eliminates the thread cropping procedure in the after-process, thereby increasing productivity. The distance between the gimpcutting scissors and the needle scarcely changes when sewing multilayered portions of the material, thus ensuring consistent gimp-cutting at any occasion. PECIFICTION LH-782N 9 pplication Model name ewing speed Needle bar stroke Max. lift of the work clamp Max. thickness of material that can be used Number of stitches Length of buttonholes Needle Hook Deceleration method Lubrication Lubricating oil Motor Weight of the machine head LH-780 uttonholing for ordinary cloth, knit, etc. 3,600rpm 12mm LH-780NV LH-780N For double-stitching with For double-stitching with gimp gimp and gimp cutter Max. 3,300rpm, Normal 3,000rpm 34.6mm 4mm (with the work clamp lowered) (by gear-change method) 11.5mm mm mm mm DP5 #11J, For JE: 134 Nm75 DP type, automatic-lubricating full-rotary hook elt-shifting method utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) 300W general-purpose motor ( 250W general-purpose motor can be used when the machine is used at a sewing speed of 3,100rpm or less.) 40kg LH-780 ERIE (eptember, 2003) 1/3

124 WHEN YOU PLCE ORDER LH-780 eries LH78 U Knife width Model mm mm mm mm ubclass machines For knits K NV Type LH78 NV N Type LH78 N Knife width Model mm mm mm titch formation quare-type bartacking Round-type bartacking 1 Knife width Model mm mm mm titch formation quare-type bartacking Round-type bartacking 1 LIT OF THE UCL MCHINE CCORDING TO THEIR PPLICTION ubclass models pplication C titch formation C Max. 22 uttonholing size (in mm) C Max. 33 C Max. 40 C Max. 47 type Men's shirts, blouses, working wear, ladies' wear LH-781U LH-782U LH-783U LH-784U K type: For Knits Knitting fablic underwear, knit products including sweaters, cardigans and tights, medium-weight material including working wear. LH-781KU LH-782KU LH-783KU LH-784KU NV type : Doublestitching with gimp N type : Doublestitching with gimp and gimp cutter weater, polo shirts, knits, and jersey wear made of the materials which need to be sewn with especially durable stitches. ame with the application of the NV type models. N type model is equipped with the automatic gimp cutter. 1 LH-782NV LH-782NV1 3 LH-782N LH-782N1 2 LH-783NV LH-783NV1 4 LH-783N LH-783N1 LH-784NV LH-784NV1 LH-784N LH-784N1 1Dimension : mm2Dimension : mm3Dimension : mm4Dimension : mm OPTION Model Part No. Description Feature Men's shirts Q060 Q061 MQ MQ Ladies' blouses pacer for first bottonholes This is a ruler to be used to set the first buttonhole at a predetermined position in accordance with the shape of the collar. djustable regardless of the dimensions and shape of collars. Q066 MQ pacer for buttonholes on topcenter plaits uttonholes are positioned at right angles to the top-center plaits. This is a ruler to be used for sewing lateral buttonholes in the process of buttonholing top-center plaits. The ruler is provided with four positioning pointers on the right and left. Each of the pointers can be shifted with a single motion. K-1 Pneumatic knife driving unit The K-1 pneumatic knife driving unit cuts the material by tapping a flat knife and nylon plate on the material. This prevents the tensing-up of texture yarns that so often occurs when sewing glossy synthetic materials. O17 utomatic single-pedal unit LH-780 ERIE (eptember, 2003) 2/3

125 EXCHNGING PRT Table of changing gears mall gear Large gear et titch No. Part No. titch No. titch No C D E F G H I J K L M N O Table showing parts used in connection with knives Knife Work clamp check Throat plate C No ize 6.4mm (1/4") 9.5mm (3/8") 12.7mm (1/2") 14.3mm (9/16") 15.9mm (5/8") 19.1mm (3/4") 22.2mm (7/8") 25.4mm (1") 31.8mm (1-1/4") 34.9mm (1-3/8") 38.1mm (1-1/2") Part No F K L V M N P Q Part No Part No Note: model machine is used as the standard for work clamp check and throat plate. LH-780 ERIE (eptember, 2003) 3/3

126 ingle-thread, Chainstitch Machine MH-180 (buttonholing type) MH-180 (decorative buttonhole type) MH-180L (label attaching type) The machine demonstrates its improved capabilities to speed up the progress of work, it achieves a shorter cycle time and does not require bobbin thread changing. Consistent feed pitch ensures beautifully-finished, high quality seams. ewing size and stitch length can be easily adjusted. The machine is provided with an auto-lifter and an automatic thread trimmer controlled by the one-pedal unit. This means that the operator can perform continuous operations with ease. For the MH-180L, single-thread chainstitch and double chainstitch settings can be quickly changed over. Labels can be attached to men's shirts, blouse, sport shirts. MH-180 PECIFICTION pplication Model name Max. sewing speed ewing size Overcasting width Max. stitch length Needle bar stroke Max. lift of the presser foot Needle (at the time of delivery) Lubrication Lubricating oil Dimensions MH-180 buttonholing process for shirts MH-180 Decorative buttonhole process for men's upper garments MH-180L Various label attaching processes 3,300rpm mm (1/4"1-3/8") mm (1/4"7/8") mm (1/4"1-1/2") mm 0.41mm 27mm 2mm 7mm (normal: 5mm) (when the presser foot is in its most advanced position) D1 (#14) #11#16 D1 (#14) #11#14 D1 (#14) #11# (Nm90) Nm75Nm (Nm90) Nm75Nm (Nm90) Nm75Nm100 y an oiler JUKI New Defrix Oil No.2 (equivalent to IO VG32) 470mm (W) 212mm (L) 260mm (H) The sewing size can be set to 38.1mm (1-1/2") at the maximum by changing the presser foot. 9 MH-180, 180, 180L (eptember, 2003) 1/2

127 EXCHNGING PRT COMPONENT Knife ize 6.4mm (1/4") 9.5mm (3/8") 12.7mm (1/2") 14.4mm (9/16") 15.9mm (5/8") 19.1mm (3/4") 22.2mm (7/8") 25.4mm (1") 28.6mm (1-1/8") 31.8mm (1-1/4") 34.9mm (1-3/8") Cloth clamp foot asm. Part No. Part No. For knit F F K K L L V V M M N N P P Q Q R R T T0 pecial order parts Description pplicable range Cloth clamp foot, right asm Cloth clamp foot, left asm. Cloth clamp foot, right asm. For the knives range from mm (1/4"1-3/8") Cloth clamp foot, left asm C0 Cloth clamp foot, right asm C D0 Cloth clamp foot, left asm. Cloth clamp foot, right asm. For the knives range from mm (1/4"3/4") D0 Cloth clamp foot, left asm. Mat Part No. Clamp foot Throat plate C C D D C C C C C C MH-180, 180, 180L (eptember, 2003) 2/2

128 Computer-controlled, Eyelet uttonholing Machine with Trimmer for Needle and Looper Thread with Gimp ME-3200 (for men's and ladies' wear) ME-3200R ME-3200J (for jeans) ME-3200C (for cotton pants and working wear) ME-3200T (for trousers) (for combined use for lateral and longitudinal buttonholing: for men's and ladies' wear) n active tension mechanism (computer-controlled thread tension mechanism) that electronically controls the needle and looper thread tensions. Needle and looper thread tensions can be digitally established on the operation panel according to sewing conditions. Data can be registered on a pattern-by-pattern basis to easily reproduce the same sewing conditions. Thread tensions can be separately established for various sections of a buttonhole such as eyelet sections and parallel sections. The knife is controlled by a stepping motor. This enables easy adjustment of the knife pressure on the operation panel to suit the material to be used, thereby preventing irregular cutting. election between the cut-before knife and cut-after knife can be made on the operation panel. The right and left work clamps are separately driven by independent air cylinders. With this mechanism, the work clamps reliably clamp materials of different thicknesses to prevent the materials from flopping. JUKI has newly developed a machine head with a shallow recess. For the efficient sewing of longitudinal buttonholing. The computer controlled design eliminates most of the complicated mechanisms. This dramatically improves maintainability. ME-3200J ME PECIFICTION pplication Model name ME-3200 ME-3200R ME-3200J ME-3200C ME-3200T For men's and ladies' wear For combined use for lateral and longitudinal buttonholing: for men's and ladies' wear For jeans For cotton pants and working wear For trousers Thread trimming style Longer remaining thread horter remaining thread horter thread cutting without gimp 1-needle, double titch system 1-needle, double chainstitch (with gimp) chainstitch (without gimp) Max. sewing speed 4002,200rpm (100rpm step) Work clamp type Work clamp type ewing length 1624 (26)mm: optional 1624 (26)mm: standard 1034mm Work clamp type M Work clamp type M 1038mm (with thread trimmer) Compensating 2432 (34)mm: standard 2432 (34)mm: optional 1050mm (in case looper thread trimming device is removed) work clamp, 24mm Work clamp type L Work clamp type L for eyelet buttonholes: 3240 (42)mm: optional 3240 (42)mm: optional standard The figures in ( ) parentheses are in case of taper bar Needle throwing width mm mm mm mm (at the time of delivery) (2.3mm) (2.5mm) (2.5mm) (2.3mm) Taper bar length 0mm, 315mm Work clamp height 13mm (max. 16mm) Method for changing stitch shape y selecting a program uttonhole cutting method y cut-before knife or cut-after or without buttonhole cutting Feed system Intermittent feed by stepping motor Cloth cutting knife drive system Vertically driven by stepping motor Needle DO558 DO558 DO558 DO558 (at the time of delivery) (Nm100) Nm90Nm110 (Nm120) Nm110Nm120 (Nm110) Nm110Nm120 (Nm100) Nm100Nm110 Lubrication utomatic (looper and spreader: by an oiler) Lubricating oil JUKI New Defrix Oil No.2 (equivalent to IO VG32) Compressed air and air consumption 0.5MPa (5kgf/F), 6NR/min (8cycle/min) Power requirement and power consumption ingle-/3-phase, 550V Dimensions 1,060mm (W)790mm (D)1,230mm (H) Total weight 185kg y selecting the left looper and left spreader, the range of stitch bite can be changed to mm from mm (T model is excluded) ME-3200, 3200R, 3200J, 3200C, 3200T (eptember, 2003) 1/4

129 WHEN YOU PLCE ORDER (COMPLETE) ME3200 pplication Table stand Power supply Option For men's and ladies' wear ingle-phase V K Not provided Z For combined use for lateral and longitudinal buttonholing: for men's and ladies' wear For jeans For cotton pants and working wear For trousers When the sewing specification category T (trousers) is selected, is the only option category available for selection (needle thread clamp device). R J C T 3-phase ingle-/3-phase V V V (for CE) D L M Needle thread clamp device Multi-cutting device Needle thread clamp device When option category M (multi-cutting device, needle thread clamp device) is selected, is the only sewing specification category available for selection (men's and ladies' wear). M EYLET HPE ND TRIGHT UTTONHOLE HPE The machine is provided as standard with 10 different stitching shape patterns. s many as 89 different patterns can be stored in memory and selected. uttonhole with a taper bar uttonhole with a straight bartack uttonhole with a round bartack uttonhole with a taper bar uttonhole with a straight bartack uttonhole with a round bartack Eyelet buttonhole traight buttonhole Registered in standard patterns (, R type) Registered in standard patterns (J, C type) LIT OF MJOR FUNCTION OF THE OPERTION PNEL Item Needle threading Forward ackward Pattern No. Data No. Counter Needle thread tension Looper thread tension Programming of data on detailed stitching shape ewing speed ewing speed for eyelet section Knife ON/OFF Cut-before knife Cut-after knife Knife No. utomatic operation Material-opening device Knife adjustment Function Function The needle bar turns by 180 degrees to allow the operator to thread the machine head from this side of the machine. Moves the feed forward stitch by stitch. Moves the feed backward stitch by stitch. Displays and specifies a pattern number. Displays and specifies a data number. Can be used as a counter for the number pieces. (The counter can either count up or count down.) Displays and specifies data on needle thread tension. Displays and specifies data on looper thread tension. pecifies data on the respective buttonhole shape sections. Cutting length, number of parallel buttonhole sections, number of buttonhole eyelet sections, cutting space, eyelet section space, taper bar length, number of taper bar sections, taper bar offset pecifies a sewing speed. pecifies a reduced speed for eyelet section witches between operation with and without the knife. Establishes data on the cut-before knife. Establishes data on the cut-after knife. elects the type number of knife to be used. witches between automatic operation and manual operation. elects the mode used to hold open the material-opening device. Enters the cloth cutting knife adjusting mode. ctivates the desired data setting using the memory switch. OPERTION PNEL ME-3200, 3200R, 3200J, 3200C, 3200T (eptember, 2003) 2/4

130 LIT OF THE REPLCEMENT GUGE Throat plate Part name Part No. pplication R J C T Needle size Throat plate (standard) Nm90 Nm110 Throat plate (for semi-wide stitch bite) Nm90 Nm110 Throat plate C (for wide stitch bite) Nm90 Nm110 Throat plate D (for narrow stitch bite) Nm90 Nm110 Throat plate J (standard) Nm120 Nm130 Throat plate J (for semi-wide stitch bite) Nm90 Nm110 Throat plate JC (for wide stitch bite) Nm90 Nm110 Throat plate JD (standard) Nm90 Nm100 Throat plate JE (standard) Nm110 Nm120 Throat plate JF (standard) Nm90 Nm100 Throat plate TE Nm100 Nm110 Work clamp, complete Work clamp Part name Compensating work clamp, complete, for eyelet buttonholes Compensating work clamp, complete M, for eyelet buttonholes Compensating work clamp, complete L, for eyelet buttonholes Work clamp, complete for longitudinal buttonholes Presser support plate Work clamp (left) Part No. pplication R J C T Part name Part No. pplication R J C T For eyelet buttonhole 40mm For eyelet buttonhole 32mm For eyelet buttonhole 22mm For straight buttonhole 40mm Compensating work clamp H, 40mm for eyelet buttonholes Compensating work clamp M, 32mm for eyelet buttonholes Compensating work clamp, 24mm for eyelet buttonholes Work clamp (right) Part name Part No. pplication R J C T For eyelet buttonhole 40mm For eyelet buttonhole 32mm For eyelet buttonhole 22mm For straight buttonhole 40mm Compensating work clamp H, 40mm for eyelet buttonholes Compensating work clamp M, 32mm for eyelet buttonholes Compensating work clamp, 24mm for eyelet buttonholes Presser support plate (left) Part name Part No. pplication R J C T Presser support plate for eyelet buttonholes Presser support plate J, M for eyelet buttonholes Presser support plate C, for eyelet buttonholes Presser support plate L for eyelet buttonholes Presser support plate for straight buttonholes Presser support plate for eyelet buttonholes Presser support plate for straight buttonholes Presser support plate (right) Part name Part No. pplication R J C T Presser support plate for eyelet buttonholes Presser support plate J, M for eyelet buttonholes Presser support plate C, for eyelet buttonholes Presser support plate L for eyelet buttonholes Presser support plate for straight buttonholes Presser support plate for eyelet buttonholes Presser support plate for straight buttonholes X Knife guard For eyelet buttonhole (standard) ize pplication Part No. (mm) R J C T type Hardness of the knife guard is high (heat-treated) Y hape Provided as standard ccessory Cloth cutting knife Left looper, left spreader For eyelet buttonhole No symboloptional Installation is invalid. Part No. hape (mm) Max. cutting pplication X Y length (mm) R J C T L L M J, C Type L: ccessory for compensating work clamp L, complete, for eyelet buttonholes (optional) J type : ccessory for compensating work clamp, complete, for eyelet buttonholes (optional) C Type M: ccessory for compensating work clamp M, complete, for eyelet buttonholes (optional) For straight buttonhole Part No. hape (mm) Max. cutting pplication X Y length (mm) R J C T For eyelet buttonhole ize pplication Part No. (mm) R J C T Hardness of the knife guard is low (not heat-treated) For straight buttonhole ize pplication Part No. (mm) R J C T For the J, C, T type, use cloth-cutting knife and knife guard that are equal in length to the maximum sewing length or shorter. (Maximum sewing length : 24mm, M: 32mm, L: 40mm) pplicable zigzag Left looper Left spreader pplication width (mm) Part No. Part No. R J C T ME-3200, 3200R, 3200J, 3200C, 3200T (eptember, 2003) 3/4

131 MULTI-CUTTING DEVICE The multi-cutting device incorporates a separate cloth cutting knife with two sections of blade --- one intended for the eyelet sections of buttonholes and one intended for straight sections. When sewing men's wear, the machine can sew eyelet buttonholes on a front body and straight buttonholes on a lapel without changing the knife. Conventionally, two different types of buttonholing machines are required for these processes. y performing two different kinds of buttonholing, the ME-3200M halves the time required for the setup procedure, including color thread changing. The end result is increased productivity. y dropping the knife two or more times per cycle, the machine can sew buttonholes of various sizes without changing the knife guard (18mm to 38mm for eyelet buttonholes and 10mm to 38mm for straight buttonholes). The machine is best suited for small-lot production of ladies' wear subject to frequent design changes. Flower hole Eyelet buttonhole Flower hole Eyelet buttonhole Eyelet shape traight shape NEEDLE THRED CLMP DEVICE ME-3200, provided with a needle thread clamp device. The needle thread clamp device eliminates the thread securing procedure by tucking the needle thread in the finished seams. The needle thread clamp device retains the needle thread to ensure neat seam formation from the very first stitch. The needle thread clamp device can be retrofitted to the machine. Optional part: Part No.: OPTION Part No. Description Marking lamp, asm. M Pedal switch, asm. M Pedal switchcable, asm. Feature When placing the material on the machine, accurate lateral positioning is guaranteed. (for ME-3200, J, C) The work clamp can be lifted/lowered and the machine can be stand using the pedal switch. Marking lamp, asm. Pedal switch, asm. ME-3200, 3200R, 3200J, 3200C, 3200T (eptember, 2003) 4/4

132 ingle-thread, Chainstitch asting Machine ML-111 High efficient basting works at a sewing speed of 1,800rpm. Chainstitch is continuously formed with a single thread and by a blind looper which eliminates the need for a bobbin thread refilling. In addition, the basted seam can be easily undone. asting works are efficiently done with a maximum stitch length of 10mm which is easily set up by a control dial. ML-111 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Thread take-up Feed dog Looper Lubrication Lubricating oil Distance from needle to machine arm ize of bed Weight of the machine ML-111 1,800rpm 10mm 35mm y hand: 5.5mm, y knee: 12mm TV7 (#14) #11#14 Needle bar thread take up 3-row feed dog lind looper y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 300mm 476mm178mm 29kg 10 PPLICTION The basting of the front edges, edge and stand of collars, flaps of men's and ladies' suits and coats. The basting of the waist bands, the flies of trousers slacks, etc. ML-111 (eptember, 2003) 1/1

133 ingle-thread, Chainstitch lindstitcher C-638 ingle-thread, Chainstitch lindstitcher with kip-stitch Device C-640 C-641 (with universal throat plate) C-641 FETURE Model Feature pplications C-638 C-640 C-641 One-piece-sole presser foot gives proper fullness to rolled lapels and collars. hort arm presser foot ensures fine finish especially when working on light-weight garments. Universal throat plate enables a single machine to blindstitch various materials independent of weight. For padding rolled lapels and collars of coats and jackets. For hemming the bottoms of ladies' and children's dresses, skirts, slacks etc. For general blindstitching on blouses, foundation garments, shirts, slacks cardigans etc. C-640: For light- and medium-weight materials C-641: For light-, medium- and heavy-weight materials 10 PECIFICTION Model name titch type Max. sewing speed titch length Feed system Differential-feed ratio C-638 C-640 C-641 ingle-thread chainstitch/lindstitch (stitch type 103) 2,500rpm 38mm Top-feed kip stitch Max. lift of the presser foot Needle (at the time of delivery) Thread Penetration width Penetration depth Lubrication Lubricating oil Weight of the machine head Non-skip (1:1) stitch only 25kg kip (2:1) stitch and Non-skip (1:1) stitch y knee: 9mm LW6T (#14) #11, #16 43:45CC (Nm90) Nm75, Nm100 #100#50, 33, Nm=120/3 3mm (fixed) Max. 0.8mm y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 27kg C-638, 640, 641 (eptember, 2003) 1/2

134 OPTION Model Part No. Description Feature C-638 pplication C-640 C-641 T Manual thread cutter Cuts sharply even tough thread like polyester and nylon thread by a single-touch operation, preventing any thread trimming failure and ensuring clear finish of seams. Using this Manual thread cutter together with electronic-stop motor controlling needle position you can highly promote working efficiency. H Uncurling guide Guides the workpiece steadily to the throat plate preventing lightweight or stretching materials from waving, curling or rising while being sewn. K mm 35mm 40mm uto-open Hemmer (swing type) Thread controller Regulates the folding width for hemming (30, 35 or 40mm). uto-open swing type hemmer permits prominent sections to pass smoothly and does not interrupt stitching. When the periphery of a skirt bottom has been completely hemmed, the front end of the hem pushes up the hemmer to continue a smooth feed of the skirt. This makes the end of a seam smoothly overlap with its starting portion. Provides the needle with more amount of thread to relax the stitch when sewing knits and other stretching fabrics. This prevents the sewing thread breakage in the stretching garments Ridge forming disc with round point 2mm 2.5mm 3mm Velvet and boa and similar materials can be sewn smoothly and softly by using a ridge forming disc with round point (optional part). WHEN YOU PLCE ORDER Please specify the necessary attachments of the sewing machine using our attachment codes as shown by an example given below: C641/K060/090/T003 Model No. of machine uto-open hemmer Thread controller Manual thread cutter C-638, 640, 641 (eptember, 2003) 2/2

135 Pinpoint addle titching Machine MP-200N In addition to balloon-stitching (to produce seams with a hand-stitched touch), smooth sewing of chain-off stitches, and having other outstanding seam quality features of the highly regarded Columbia 100, the MP-200N achieves more improved sewing capabilities and a wider adjustment range. The machine comes with a box type feed that permits a split adjustment in both horizontal and vertical directions, thereby responding to the sewing of various types of materials. dditionally, the inclination of the feed dog is also adjustable in accordance to the material. Needle gauges support, using replacement parts, stitch widths from as narrow as 1.2mm to as wide as 5.0mm. The applicable range of yarn counts has been widened from #60 to #8 (33, Nm = 120/3) for both Tetron and spun thread. This allows the machine to be used for topstitching a wider range of items. PECIFICTION MP-200NL Max. sewing speed Model name MP-200N MP-200NL 2,000rpm (feed pitch 6mm or less) 1,500rpm (feed pitch 68mm) 1,200rpm (feed pitch 810mm) 1,500rpm (feed pitch 68mm) 1,200rpm (feed pitch 810mm) 1.6mm Pinpoint stitch width (needle gauge) (2.0 mm: pacer is required to be changed with the one supplied with the machine) 5.0mm Length of thread that appears on the right side of sewing product (reference) 1.1mm 4.5mm Feed pitch 3.510mm 10mm (For the needle gauge of 5 mm) Recommended feed pitch 3.510mm (feed pitch that is larger than double of needle gauge is recommended) pplicable range of gauges mm mm (for 1.2 and 2.5mm, optional parts are required) (for 3 and 4mm, optional parts are required) Needle CHMETZ 29C150 (Nm90) Nm80Nm140 ORGN CP1J (#22U) #18U#22U Needle Hook-needle CHMETZ 29C151 (Nm100) Nm80Nm140 ORGN CP12J (#23) #19#30 (at the time Recommended thread Tetronpun Tetronpun of delivery) Recommended yarn count #60#30, 3346, Nm=120/360/3 #30#8, 4692, Nm=60/330/3 Recommended material/process Wool, lining/ facing-topstitching process Flannel/ topstitching peripheries of collars and pockets Lift of the presser foot plit adjustment of feed (vertical/horizontal direction) Lubrication Lubricating oil y hand: 5.5mm/y knee: 10.5mm Possible y an oiler JUKI New Defrix Oil No.2 (equivalent to IO VG32) 10 WHEN YOU PLCE ORDER MP200N Needle gauge 1.6mm 5.0mm L UE OF PINPOINT TITCHING WIDER RNGE OF PPLICLE NEEDLE GUGE ND YRN COUNT Model name Needle gauge Gauge 1.2mm Option 1.6mm Provided as standard MP-200N (Needle gauge To be replaced with the needle 1.6mm) 2.0mm clamp spacer supplied with the machine 2.5mm Option MP-200NL 3.0mm Option (Needle gauge 4.0mm Option 5.0mm) 5.0mm Provided as standard pplicable yarn count Tetron, pun #60~#30, 33~46, Nm=120/3~60/3 Tetron, pun #30~#8, 46~92, Nm=60/3~30/3 Refer to "Replaceable parts of gauges" for a correspondence between gauges and needle gauges. Men's coats and jackets qtopstitching on the front facing wlind edge stitch at the far side of the front facing, and blind edge stitch on the front body (for preventing uneven material feed) qtopstitching wlind edge stitch at the far side of the front facing wlind edge stitch on the front body Trousers qtopstitching on the front pocket mouths and left top-center plait wide topstitching qtopstitching on the front pocket mouths qtopstitching on the left top-center plait wide topstitching Miscellaneous qtopstitching on collars of coats, ladies' cut and sewn garments, knit shirts, etc. wtopstitching on the topcenter plaits of coats, ladies' wear, shirts, etc. evarious kinds of topstitching on coats, ladies' wear, shirts, etc. e q w MP-200N (eptember, 2003) 1/2

136 REPLCELE PRT OF GUGE Replaceable parts Part No. Description Quantity Needle clamp Needle clamp spacer (1.2mm) Needle clamp spacer (1.6mm) Needle clamp spacer (2.0mm) Needle clamp spacer (2.5mm) Needle clamp (3mm) Needle clamp (4mm) Needle clamp (5mm) Needle holder P crew Needle holder (3mm) Needle holder (4mm) Needle holder (5mm) P Needle clamp screw Needle clamp hook P crew Presser (asm.) Presser L (asm.) Throat plate (1.43.0) Throat plate (1.64.2) Throat plate (1.64.7) Throat plate (2.25.6) Throat plate (2.26.6) Throat plate (2.27.6) preader fitting base (asm.) preader (JC1023) 1 M C crew preader (3mm) preader (4mm) preader (5mm) Looper clank Looper clank 1 M TP crew 2 type (1.6mm, standard) L type (5.0mm, standard) mm mm mm mm mm mm mm Remarks type, common type, exclusive to 1.2mm type, exclusive to 1.6mm type, exclusive to 2.0mm type, exclusive to 2.5mm L type, exclusive to 3.0mm L type, exclusive to 4.0mm L type, exclusive to 5.0mm type, common type, common L type, exclusive to 3.0mm L type, exclusive to 4.0mm L type, exclusive to 5.0mm L type, common L type, common L type, common type, common L type, common type, exclusive to 1.2mm type, common to 1.6~2.0mm type, exclusive to 2.5mm L type, exclusive to 3.0mm L type, exclusive to 4.0mm L type, exclusive to 5.0mm type, common/l type 3.0mm type, common type, common/l type 3.0mm L type, exclusive to 3.0mm L type, exclusive to 4.0mm L type, exclusive to 5.0mm type, common L type, common Common to types and sizes Needle clamp spacer Needle clamp Needle holder Needle Hook-needle Needle gauge 1.6mm Part number of gauge set Part No. Description Needle gauge size 1.2mm set Not prepared specifications Needle clamp spacer (accessory parts) Not prepared Needle gauge size 2.5mm set Needle gauge size 3.0mm L set Needle gauge size 4.0mm L set Not prepared specifications Needle clamp hook Needle clamp crew Needle holder Needle Hook-needle Needle gauge 5.0mm OPTION MP-200N (eptember, 2003) 2/2 parts for and L types (gauge set is not prepared) ccessory parts for type (gauge set is not prepared) Parts to be purchased (included in a gauge set) at the time of changing sizes Parts not to be purchased (not included in a gauge set) at the time of changing sizes since they are included in or L type machine as accessories. Needle bar crank In order to be applicable to a wider range of materials, various types of needle bar cranks with different thread take-up timings have been prepared. Part No. Thread take-up timing Type Remarks timing (provided as standard) Type timing, of which is earlier than that of the Thread is applied with a higher tension as compared standard needle bar crank by 10 with the standard needle bar crank Type timing, of which is later than that of the standard Thread is applied with a lower tension as compared needle bar crank by 10 with the standard needle bar crank Needle bar crank which has a flat shaft to permit the tepless setting stepless setting of thread take-up timing. Note, however, that the needle bar stroke changes according to the thread take-up timing.

137 Post-bed, 1-needle, Lockstitch, asting Machine LT-591 In order to overcome the weakness of rapid consumption of the bobbin thread, the amount of wound bobbin thread is increased to over 5 times that of previous models. Thus, the bobbin thread changing time is more shortened than the previous models and naturally the production efficiency is greatly upped. s either a flat-bed type or a high wooden buck type auxiliary table can be used, the usage is very wide. When the treadle is stepped on, the machine starts and when the foot is released, the machine always stops at a required position. Therefore, the machine can be stopped at each stitch and thus, this is an ideal machine for basting of complicated process which demands accurate basting. LT-591 PECIFICTION Model name Max. sewing speed titch length Feed mechanism Needle bar stroke Max. lift of the presser Needle (at the time of delivery) Hook Operation system Lubrication Lubricating oil ed size Weight of the machine head LT rpm Free Without feed mechanism (manual) 52.8mm y hand: 35mm TV7 (#14) Vertical-axis large hook (dia. of bobbin: 37mm, amount of bobbin tread is over 5 times more than previous models) utomatic stop system by pedal action y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 440mm178mm 53kg 10 KIND OF HIGH WOODEN UCK TLE C Usage-example : Round type asting front interlining : Round type asting front asting neckline asting front facing asting bottom C: Flat type asting pad D: Flat type asting sleeve cuff asting sleeve lining, etc. D LT-591 (eptember, 2003) 1/1

138 Computer-controlled Cycle Machine with Input Function M-210Dewing area: 60mm(L)130mm(W) With its newly designed thread take-up and shuttle hook, the machine reduces irregular stitches and provides consistent thread tension. The feeding frame and the intermediate presser have been improved to provide a higher pressure on the material. y securely clamping the material, they ensure consistent-quality seams free from uneven material feed. The sewing capability has been improved further, especially sewing heavy-weight materials with thick thread. High-speed performance of 2500rpm (when stitch length is set to 3mm). The lift of the feeding frame is now as high as 30mm (for pneumatic feeding frame), and the lift of the intermediate presser has also been extended to 20mm. With these increased lifts, the material to be sewn can be easily placed on the machine. The machine incorporates a direct-drive mechanism that connects a compact C servomotor directly to the main shaft. This transmits motor revolutions to the main shaft with no loss, thereby improves the machine's responsiveness. Computer-controlled Cycle Machine with Input Function for Wider-area Perfect titching M-210D P TYPEewing area: 60mm(L)130mm(W) s a result of JUKI's thorough study of sewing performance, the area in which hitch stitches appears is reduced to one-third or less of the area produced with conventional cycle machines. Consequently, the sewing area finished with perfect stitches is enlarged, and the seam quality of top stitches is further upgraded. ince the feeding direction of the hitch stitching area is restricted to a range of 5 to 55, each of the four different feeding directions (0, 90, 180 and 270 ) used to sew the four sides of a rectangular label can be finished with perfect stitching. M-210D M-210D (P type) 11 WHEN YOU PLCE ORDER pplication Feeding frame type ubclass titch type Magnet-driven feeding frame 5000 For heavy-weight materials H Pneumatic separately-driven feeding frame L ubclass 6001 Perfect stitch P M210D Z Power supply V C ingle-phase V K V R V D 3-phase V L V (For CE) M Pedal switch 2-pedal unit 3-pedal unit PK 2-pedal unit PK 3-pedal unit C D Control panel English and pictograph For using magnet-driven feeding frame type, please select or C type. (: C type) For using Pneumatic separately-driven feeding frame type, please select or D type. M-210D, 210D P TYPE (eptember, 2003) 1/3

139 PECIFICTION Model name M-210D M-210DP TYPE M-210D M-210DH M-210D M-210DH pplication For heavy-weight For heavy-weight materials materials ewing area 60mm (L) 130 (W) mm Max. sewing speed 2,500rpm (when stitch length is set to 3mm) 2,300rpm (when stitch length is set to 4mm) titch length mm Needle bar stroke 41.2mm Lift of the feeding frame Max. 25mm, Pneumatic: Max. 30mm Lift of the intermediate presser Max. 20mm troke of intermediate presser 4mm (0.510mm) Needle DP5 (#14) DP17 (#18) DP5 (#14) DP17 (#18) (at the time of delivery) For JE: 134 (Nm100) For JE: (Nm110) For JE: 134 (Nm100) For JE: (Nm110) #80#20 #50#2 #60#30 #50#8 Thread /340/3 120/310/3 120/360/3 120/330/3 Hook Double-capacity shuttle hook DP double-capacity shuttle hook Input function Provided as standard Memory medium 2DD/2HD 3.5" micro-floppy disk Number of stitches that can be stored in memory Max. 360,000 stitches (max. 20,000 stitches/pattern) Number of patterns that can be input Max. 691 patterns (2DD)/999 patterns (2HD) Enlarging/Reducing facility 1400% (by increasing/decreasing the stitch length or the number of stitches) Error detector function Needle thread breakage detector, temporary stop (pause) switch, error code indicating function obbin thread counter Provided as standard ewing machine motor 400W compact C servomotor (direct-drive system) Power consumption ingle-phase, 3-phase 600V Lubrication utomatic Lubricating oil JUKI New Defrix Oil No.2 (equivalent to IO VG32) Total weight 120kg Dimensions 710mm (L) 1,200mm (W) 1,200mm (H) PROGRMMING FUNCTION With its large memory, the machine responds to many different sewing patterns. ewing settings can be established and sewing patterns programmed entirely through the operation panel. mple storage capacity: maximum of 360,000 stitches on a floppy disk, or 691 patterns on a 2DD disk or 999 ones on a 2HD disk. maximum of 20,000 stitches can be input per pattern. With this large storage capacity, the machine supports embroidery patterns with large numbers of stitches. sewing pattern can be enlarged/reduced without changing the stitch length. Functions that are frequently used during pattern data input (regular stitching (linear, spline), point stitching, jumping, thread trimming, etc.) are allocated to specific keys on the operation panel. This reduces the time required for input of pattern data. M-210D, 210D P TYPE (eptember, 2003) 2/3

140 OPTION Model Part No. Description Feature PM-1 PGM-20 FU01 FU01L MU PJ PJ C00 T E T E K E TP WP D D D D D D0 M Programming software for computer-controlled sewing machines Programming software for computer-controlled sewing machines Inverted clamp device for the magnet-driven feeding frame Inverted clamp device for separately driven pneumatic feeding frame Thread tension controller No.3 Needle thread clamp device Junction cord Milling unit Cassette holder fixing base (asm.) Cassette holder (asm.) One-touch utility clamp for the magnet-driven feeding frame One-touch utility clamp for separately-driven pneumatic feeding frame I/O expansion unit This software is to input and edit sewing data of JUKI's latest sewing machines. Its versatile input functions allow to input sewing data of each electronic sewing machine model easily, accurately, and quickly. It supports high quality production with high added value by utilizing and creating original data for specific designs and applications. The PGM-20 is provided with many different input functions to permit interactive data creation, free from difficulties, using a general-purpose personal computer or digitizer. The pneumatically driven inverted clamp device is best suited for the attachment of small parts of whose entire peripheries need to be sewn such as labels and emblems. The tension controller unit is used to partially change the needle thread tension during the sewing of a pattern. This device prevents the thread from tangling at the start of sewing. The milling unit can be installed on the machine to allow the operator to easily machine a feeding frame or feed plate. The next material to be sewn can be placed between the top and bottom plates of the cassette holder while the machine is still engaged in the sewing of the currently set material. The feeding frame and the feed plate can be quickly changed without any tools. The machine is provided with external input/output ports that are very convenient when re-modeling the machine with accessory devices attached. 11 Part No. Description D00 Intermediate presser D0 Intermediate presser D0C Intermediate presser C D0E Intermediate presser E R D0F Intermediate presser F RL L D0 Feeding frame blank (with knurl) D D D D0C D0 Feeding frame blank (without knurl) Feeding frame blank (without knurl) Feeding frame blank, right (with knurl) Feeding frame blank, left (with knurl) Lower plate blank (with knurl) D0 Lower plate blank (without knurl) M-210D, 210D P TYPE (eptember, 2003) 3/3

141 Computer-controlled Cycle Machine with Input Function for Topstitching Jean Pockets M-210DHL6100Zewing area: 60mm(L)220mm(W) Developed based on M-210D, the machine provides excellent sewing capabilities and operability, with an expanded sewing area is best suited for the "topstitching of hip pockets on jeans." The M-210DHL6100Z cannot be remodeled from the M-210D. The machine achieves a maximum sewing speed of 2,500rpm, substantially upgrading productivity(when the stitch length is equal to or shorter than 3mm). In addition, the machine inherits outstanding features of the M-210D such as one-touch calling of a sewing pattern, easier workpiece placement with the increased lift of the feeding frame, accurate workpiece positioning by the pneumatic monolithic feeding frame, and reduced bobbin-thread replacement with the newly adopted double-capacity shuttle hook. M-210DHL6100Z PECIFICTION Model name ewing area Max. sewing speed titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Needle (at the time of delivery) Thread Hook Memory medium Number of stitches that can be stored in memory Number of patterns that can be input Enlarging/Reducing facility obbin thread counter ewing machine motor Power consumption Lubrication Lubricating oil Compressed air and air consumption Total weight Dimensions M-210DHL6100Z 60mm (L)220mm (W) 2,500rpm (when stitch length is set to mm) 2,300rpm (when stitch length is set to mm) 2,000rpm (when stitch length is set to mm) mm 41.2mm 25mm (Max. 30mm) 20mm 4mm (0.510mm) DP17 (#18), For JE: (Nm110) #50#2, 33207, Nm=120/310/3 Double-capacity shuttle hook 2DD/2HD 3.5" micro-floppy disk Max. 360,000 stitches (max. 20,000 stitches/pattern) Max. 691 patterns (2DD)/999 patterns (2HD) 1400% (0.1% step), by increasing/decreasing the stitch length or the number of stitches Provided as standard 400W compact C servomotor (direct-drive system) ingle-phase, 3-phase 600V utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) MPa (55.5kgf/cm 2 ), 1.8N /min 120kg 710mm (L)1,200mm (W)1,200mm (H) 11 M-210DHL6100Z (eptember, 2003) 1/2

142 WHEN YOU PLCE ORDER pplication Feeding frame type For heavy-weight materials H Pneumatic separately-driven feeding frame L M210DHL6100 Z titch type Power supply Pedal switch Control panel V C 2-pedal unit English and pictograph Perfect stitch P ingle-phase V K PK 2-pedal unit C V R V D 3-phase V L V (For CE) M PROGRMMING FUNCTION With its large memory, the machine responds to many different sewing patterns. ewing settings can be established and sewing patterns programmed entirely through the operation panel. mple storage capacity: maximum of 360,000 stitches on a floppy disk, or 691 patterns on a 2DD disk or 999 ones on a 2HD disk. maximum of 20,000 stitches can be input per pattern. With this large storage capacity, the machine supports embroidery patterns with large numbers of stitches. sewing pattern can be enlarged/reduced without changing the stitch length. Functions that are frequently used during pattern data input (regular stitching (linear, spline), point stitching, jumping, thread trimming, etc.) are allocated to specific keys on the operation panel. This reduces the time required for input of pattern data. OPTION Model Part No. Description Feature PM-1 PGM-20 MU PJ PJ C00 T E T E K E TP WP D D D0 M M-210DHL6100Z (eptember, 2003) 2/2 Programming software for computer-controlled sewing machines Programming software for computer-controlled sewing machines Thread tension controller No.3 Needle cooler Milling unit One-touch utility clamp for the monolithic feeding frame One-touch utility clamp for separately-driven pneumatic feeding frame I/O expansion unit This software is to input and edit sewing data of JUKI's latest sewing machines. Its versatile input functions allow to input sewing data of each electronic sewing machine model easily, accurately, and quickly. It supports high quality production with high added value by utilizing and creating original data for specific designs and applications. The PGM-20 is provided with many different input functions to permit interactive data creation, free from difficulties, using a general-purpose personal computer or digitizer. The tension controller unit is used to partially change the needle thread tension during the sewing of a pattern. The milling unit can be installed on the machine to allow the operator to easily machine a feeding frame or feed plate. The feeding frame and the feed plate can be quickly changed without any tools. The machine is provided with external input/output ports that are very convenient when re-modeling the machine with accessory devices attached.

143 Computer-controlled Cycle Machine with Input Function for Extra Heavy-weight materials M-210DHL6300Zewing area: 60mm(L)130mm(W) ased on M-210D, the model that provides upgraded sewing capabilities and operability, M-210DHL6300 has been specifically developed as a computer-controlled cycle machine for seat belts. The machine has a sewing area of 60mm in length and 130mm in width, and is provided with a slide thread take-up lever that adequately tenses thick thread at all times, thereby ensuring the upgraded sewing capabilities required of a sewing machine for extra heavy-weight materials. With its maximum sewing speed of 2,000rpm (at a stitch length of 4.0mm or less) and increased jump speed, the machine demonstrates higher productivity. The machine is provided with many different features to achieve increased productivity throughout the entire sewing work, including one-touch simple access to sewing patterns, accurate positioning of the material by a separately driven pneumatic feeding frame, easier placement of the material by an increased lift of the feeding frame (max. 30mm), and reduced frequency of bobbinthread-replacement by adopting a double-capacity shuttle hook. If the stitch length exceed 4.0mm, the machine will run at a speed equivalent to the standard sewing speed of the M-210D. The machine also provides helpful features for enhanced work comfort such as needle bar up-position-stop function to allow the needle bar to stop at its highest dead point and a direct-drive system that ensures outstanding responsiveness and reduced vibration and noise. M-210DHL6300Z PECIFICTION 11 Model name ewing area Max. sewing speed titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Needle (at the time of delivery) Hook Treard take-up Memory medium Number of stitches that can be stored in memory Number of patterns that can be input Enlarging/Reducing facility obbin thread counter ewing machine motor Power consumption Lubrication Lubricating oil Compressed air and air consumption Total weight Dimensions M-210DHL6300Z 60mm (L)130mm (W) 2,000rpm (when stitch length is 4.0mm or less) mm 41.2mm Max. 30mm 20mm 4mm (0.510mm) DP17 (#25)#22#26 Double-capacity shuttle hook lide style 2DD/2HD 3.5" micro-floppy disk Max. 360,000 stitches (max. 20,000 stitches/pattern) Max. 691 patterns (2DD)/999 patterns (2HD) 1400% (0.1% step), by increasing/decreasing the stitch length or the number of stitches Provided as standard 400W compact C servomotor (direct-drive type) ingle-phase, 3-phase 600V utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) MPa (55.5kgf/cm 2 ), 1.8N /min 120kg 710mm (L)1,200mm (W)1,200mm (H) M-210DHL6300Z (eptember, 2003) 1/2

144 WHEN YOU PLCE ORDER M210DHL6300Z pplication For heavy-weight materials H PROGRMMING FUNCTION With its large memory, the machine responds to many different sewing patterns. ewing settings can be established and sewing patterns programmed entirely through the operation panel. mple storage capacity: maximum of 360,000 stitches on a floppy disk, or 691 patterns on a 2DD disk or 999 ones on a 2HD disk. maximum of 20,000 stitches can be input per pattern. With this large storage capacity, the machine supports embroidery patterns with large numbers of stitches. sewing pattern can be enlarged/reduced without changing the stitch length. Functions that are frequently used during pattern data input (regular stitching (linear, spline), point stitching, jumping, thread trimming, etc.) are allocated to specific keys on the operation panel. This reduces the time required for input of pattern data. OPTION Model Part No. Description Feature This software is to input and edit sewing data of JUKI's latest sewing machines. Its versatile input functions allow to Programming software for computer-controlled input sewing data of each electronic sewing machine model PM-1 sewing machines easily, accurately, and quickly. It supports high quality production with high added value by utilizing and creating original data for specific designs and applications. PGM-20 FU01L PJ PJ C00 The PGM-20 is provided with many different input functions Programming software for computer-controlled to permit interactive data creation, free from difficulties, sewing machines using a general-purpose personal computer or digitizer. The pneumatically driven inverted clamp device is best Inverted clamp device for separately driven suited for the attachment of small parts of whose entire pneumatic feeding frame peripheries need to be sewn such as labels and emblems. T E The tension controller unit is used to partially change the Thread tension controller No.3 T E needle thread tension during the sewing of a pattern. MU K E TP WP D Needle cooler Milling unit The milling unit can be installed on the machine to allow the operator to easily machine a feeding frame or feed plate D0 Cassette holder fixing base (asm.) The next material to be sewn can be placed between the top and bottom plates of the cassette holder while the machine is still engaged in the sewing of the currently set D0 Cassette holder (asm.) material D0 One-touch utility clamp for the monolithic feeding frame The feeding frame and the feed plate can be quickly D0 One-touch utility clamp for separately-driven changed without any tools. pneumatic feeding frame M I/O expansion unit The machine is provided with external input/output ports that are very convenient when re-modeling the machine with accessory devices attached. M-210DHL6300Z (eptember, 2003) 2/2 titch type Power supply V C ingle-phase V K V R Pedal switch 3-pedal unit PK 3-pedal unit Feeding frame type V D Pneumatic separately-driven feeding frame L 3-phase V L Control panel V (For CE) M English and pictograph D

145 Computer-controlled Cycle Machine with Input Function M-215Dewing area: 110mm(L)220mm(W) M-221Dewing area: 160mm(L)250mm(W) The machine runs at a sewing speed of 2,500rpm the highest speed achieved in a machine provided with only a medium-sized sewing area. Its jump speed and thread trimming speed are also extremely high, effectively doubling those of conventional machines. With its shortened cycle time, the machine dramatically increases productivity. With its direct-drive machine head (beltless) directly joined to a compact C servomotor, the machine provides improved responsiveness and upgraded stop accuracy. Vibration and noise are reduced even during high-speed operation, thereby achieving a comfortable working environment. The machine is configured with JUKI s unique X Y feed mechanism built into the bed. tabilized by the outstanding strength and rigidity of its feed mechanism, the machine promises the increased feed accuracy required to produce high-quality seams even in difficult sewing processes such as decorative pattern stitching. ince the X Y feed mechanism is built into the bed, the space under the arm is both increased and flattened. It allows the operator to place sewing products easily. [pace under the arm] M-215D: ewing area+253mm M-221D: ewing area+246mm Computer-controlled Cycle Machine with Input Function for Wider-area Perfect titching M-215D P TYPEewing area: 110mm(L)220mm(W) M-221D P TYPEewing area: 160mm(L)250mm(W) s a result of JUKI's thorough study of sewing performance, the area in which hitch stitches appears is reduced to one-third or less of the area produced with conventional cycle machines. Consequently, the sewing area finished with perfect stitches is enlarged, and the seam quality of top stitches is further upgraded. ince the feeding direction of the hitch stitching area is restricted to a range of 5 to 55, each of the four different feeding directions (0, 90, 180 and 270 ) used to sew the four sides of a rectangular label can be finished with perfect stitching. WHEN YOU PLCE ORDER M-221D M-221D 11 pplication For heavy-weight materials H Feeding frame type Pneumatic monolithic feeding frame (standard) Pneumatic separately-driven feeding frame (with double-stepped stroke function) L ubclass ubclass titch type Perfect stitch P M 215D 221D Z Power supply V ingle-phase V V V 3-phase V V (for CE) C K R D L M Pedal switch 2-pedal unit PK 2-pedal unit PK 3-pedal unit C D elect "" or "C" for the monolithic feeding frame (specification: ) or "D" for the double-stepped stroke feeding frame (specification: L). Control panel English and pictograph M-215D, 221D, 215D P TYPE, 221D P TYPE (eptember, 2003) 1/3

146 PECIFICTION pplication Model name ewing area Max. sewing speed titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Needle (at the time of delivery) Thread Hook Memory medium pace under the arm Number of stitches that can be stored in memory Number of patterns that can be input Enlarging/Reducing facility obbin thread counter ewing machine motor Power consumption Compressed air and air consumption Lubrication Lubricating oil Total weight Dimensions M-215D M-215DP TYPE M-221D M-221DP TYPE M-215D M-215DH M-215D M-215DH M-221D M-221DH M-221D M-221DH DP5 (#14) For JE: 134 (Nm100) #80# /340/3 For heavyweight materials 110mm (L)220mm (W) 160mm (L)250mm (W) 2,500rpm (when stitch length is 3mm or less) mm 41.2mm 25mm (max. 30mm) DP17 (#18) For JE: (Nm110) #50# /310/3 Double-capacity shuttle hook DP5 (#14) For JE: 134 (Nm100) #60# /360/3 ewing area253mm For heavyweight materials 20mm 4mm (0.510mm) DP17 (#18) For JE: (Nm110) #50# /330/3 DP double-capacity shuttle hook DP5 (#14) For JE: 134 (Nm100) #80# /340/3 2DD/2HD 3.5" micro-floppy disk Max. 360,000 stitches(max. 20,000 stitches/pattern) Max. 691 patterns (2DD)/999 patterns (2HD) ewing area246mm 1400% (0.1% step), by increasing/decreasing the stitch length or the number of stitches Provided as standard 400W compact C servomotor (direct-drive system) ingle-phase, 3-phase 600V MPa (55.5kgf/cm 2 ), 1.8N /min For heavyweight materials DP17 (#18) For JE: (Nm110) #50# /310/3 Double-capacity shuttle hook DP5 (#14) For JE: 134 (Nm100) #60# /360/3 utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) 175kg 960mm (L)1,200mm (W)1,200mm (H) 1,005mm (L)1,200mm (W)1,200mm (H) For heavyweight materials DP17 (#18) For JE: (Nm110) #50# /330/3 DP double-capacity shuttle hook PROGRMMING FUNCTION With its large memory, the machine responds to many different sewing patterns. ewing settings can be established and sewing patterns programmed entirely through the operation panel. mple storage capacity: maximum of 360,000 stitches on a floppy disk, or 691 patterns on a 2DD disk or 999 ones on a 2HD disk. maximum of 20,000 stitches can be input per pattern. With this large storage capacity, the machine supports embroidery patterns with large numbers of stitches. sewing pattern can be enlarged/reduced without changing the stitch length. Functions that are frequently used during pattern data input (regular stitching (linear, spline), point stitching, jumping, thread trimming, etc.) are allocated to specific keys on the operation panel. This reduces the time required for input of pattern data. M-215D, 221D, 215D P TYPE, 221D P TYPE (eptember, 2003) 2/3

147 OPTION Model Part No. Description Feature PM-1 PGM-20 FU03 MU13 MU PV PX P WP D D D D P4 M Programming software for computer-controlled sewing machines Programming software for computer-controlled sewing machines Pneumatic inverted clamp device Thread tension controller No.3 Needle thread clamp device Junction cord Needle cooler Milling unit (for M-215D) Milling unit (for M-221D) Cassette holder fixing base (asm.) Cassette holder (asm.) One-touch utility clamp I/O expansion unit This software is to input and edit sewing data of JUKI's latest sewing machines. Its versatile input functions allow to input sewing data of each electronic sewing machine model easily, accurately, and quickly. It supports high quality production with high added value by utilizing and creating original data for specific designs and applications. The PGM-20 is provided with many different input functions to permit interactive data creation, free from difficulties, using a general-purpose personal computer or digitizer. The device is designed for installation on the machine provided with a double-stepped stroke feeding frame (specification: L). The tension controller unit is used to partially change the needle thread tension during the sewing of a pattern. This device prevents the thread from tangling at the start of sewing. The milling unit can be installed on the machine to allow the operator to easily machine a feeding frame or feed plate. The next material to be sewn can be placed between the top and bottom plates of the cassette holder while the machine is still engaged in the sewing of the currently set material. The feeding frame and the feed plate can be quickly changed without any tools. The machine is provided with external input/output ports that are very convenient when re-modeling the machine with accessory devices attached. 11 Part No. Description D00 Intermediate presser D0 Intermediate presser D0C Intermediate presser C L D0E Intermediate presser E D0F Intermediate presser F RL R Work clamp paper material () Work clamp paper material () Presser cloth sheet Presser cloth sheet D00 Feeding frame blank, right (with knurl) D00 Feeding frame blank, left (with knurl) M-215D D00 Feeding frame blank (with knurl) Feeding frame blank, right (with knurl) Feeding frame blank, left (with knurl) M-221D step feeding frame blank D D00 Feeding frame blank plate (with knurl) Feeding frame blank plate (without knurl) M-215D Feeding frame blank plate (with knurl) Feeding frame blank plate M-221D D0 Lower plate blank (without knurl) D0 Lower plate blank (with knurl) M-215D D0C Lower plate blank (0.5mm) D0 Lower plate blank (without knurl) D0 Lower plate blank (with knurl) M-221D D0C Lower plate blank (0.5mm) M-215D, 221D, 215D P TYPE, 221D P TYPE (eptember, 2003) 3/3

148 Computer-controlled Cycle Machine with Input Function M-223Cewing area: 200mm(L)300mm(W) M-224Cewing area: 250mm(L)400mm(W) est-suited for sewing processes to attach small parts onto shoes or bags, attach pockets onto garments, sew decorative stitches, etc. There is sufficient area under the arm (sewing area + free space 290mm (M-223C) or 240mm (M-224C)). The feeding frame can go up as high as 30mm, which means that a heavyweight material can be handled with ease. The feeding frame can also be manually lowered. This allows the operator to finely adjust the position of the material to be sewn. The machine is capable of sewing at a speed as high as 2,000rpm (when the stitch length is set to 3mm (M-223C) or 2.7mm (M-224C)). The machine is equipped with a large hook which reduces the frequency that the bobbin thread needs to be replaced. The machine ensures accurate stitching with a resolution as precise as 0.1mm. The newly-developed XY mechanism further improves strength and rigidity of the feed. Thread trimming mechanism ensures highly-improved reliability. M-223C Computer-controlled Cycle Machine with Input Function for Wider rea Perfect titching M-223Pewing area: 200mm(L)300mm(W) M-224Pewing area: 250mm(L)400mm(W) s a result of JUKI's thorough study of sewing performance, the area in which hitch stitches appears is reduced to one-third or less of the area produced with conventional cycle machines. Consequently, the sewing area finished with perfect stitches is enlarged, and the seam quality of top stitches is further upgraded. ince the feeding direction of the hitch stitching area is restricted to a range of 5 to 55, each of the four different feeding directions (0, 90, 180 and 270 ) used to sew the four sides of a rectangular label can be finished with perfect stitching. 11 WHEN YOU PLCE ORDER Feeding frame type (pneumatic monolithic feeding frame) Pneumatic double-stepped stroke feeding frame Pneumatic inverted clamp (with a double-stepped stroke feeding frame) Pneumatic separately-driven feeding frame (with a double-stepped stroke feeding frame) For the machine with sewing specification G, the feeding frame that can be used with it is limited to, or L. T L Option Not provided utomatic bobbin changer Y Power supply V ingle-phase V U...,115V V 3-phase V U...,220V (JE)380V D E H F G J K C 2P motor is used for the sewing application type G. Pedal switch (2-pedal unit) 3-pedal unit (PK47) C D M223 M224 Machine head type Wider-area perfect stitching For the M-223P and M-224P, only the application and H are applicable. C P pplication For medium-weight materials For heavy-weight materials with double-capacity shuttle hook H G Feeding frame type Pneumatic double-stepped stroke feeding frame ubclass ubclass Pedal switch 3-pedal unit (PK47) M-223C, 224C, 223P, 224P (eptember, 2003) 1/4 D

149 PECIFICTION Model name pplication ewing area Max. sewing speed titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Needle (at the time of delivery) Thread Input function Hook Memory medium Free space under the arm Number of stitches that can be stored in memory Number of patterns that can be input Enlarging/Reducing facility obbin thread counter Compressed air and air consumption ewing machine motor Power consumption Lubrication Lubricating oil Weight Dimensions M-223C DP5 (#14) For JE: 134 (Nm100) #60# /360/3 M-223CH For medium-weight materials DP17 (#18) For JE: (Nm110) #50# /330/3 M-223CG For heavy-weight materials 200mm (L)300mm (W) 2,000rpm (when stitch length is set to 3mm) mm 41.2mm 25mm (max. 30mm) 20mm 4mm (0.37mm) DP17 (#23) For JE: Y3355 (Nm160) #8# /310/3 M-223P DP5 (#14) For JE: 134 (Nm100) #60# /360/3 M-223PH For medium-weight materials DP17 (#18) For JE: (Nm110) #50# /330/3 Provided as standard (can also be connected to the PGM-5) Large-capacity shuttle hook Double-capacity shuttle hook DP large-capacity shuttle hook 2DD/3.5"micro-floppy disk ewing area290mm Max. 176,000 stitches (max. 4,000 stitches/pattern) Max. 691 patterns % (0.1% step), by increasing/decreasing the stitch length or the number of stitches Provided as standard 0.55MPa (5.5kgf/cm 2 ), 1.8N /min 400W, 4P 550W, 2P 400W, 4P electronic-stop motor electronic-stop motor electronic-stop motor ingle-phase, 3-phase 1KV utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) 290kg 1,190mm (L)1,230mm (W)1,285mm (H) Model name pplication ewing area Max. sewing speed titch length Needle bar stroke Lift of the feeding frame Lift of the intermediate presser troke of intermediate presser Needle (at the time of delivery) Thread Input function Hook Memory medium Free space under the arm Number of stitches that can be stored in memory Number of patterns that can be input Enlarging/Reducing facility obbin thread counter Compressed air and air consumption ewing machine motor Power consumption Lubrication Lubricating oil Weight Dimensions M-224C DP5 (#14) For JE: 134 (Nm100) #60# /360/3 M-223C, 224C, 223P, 224P (eptember, 2003) 2/4 M-224CH For medium-weight materials DP17 (#18) For JE: (Nm110) #50# /330/3 M-224CG For heavy-weight materials 250mm (L)400mm (W) 2,000rpm (when stitch length is set to 2.7mm) mm 41.2mm 25mm (max. 30mm) 20mm 4mm (0.37mm) DP17 (#23) For JE: Y3355 (Nm160) #8# /310/3 M-224P DP5 (#14) For JE: 134 (Nm100) #60# /360/3 M-224PH For medium-weight materials DP17 (#18) For JE: (Nm110) #50# /330/3 Provided as standard (can also be connected to the PGM-5) Large-capacity shuttle hook Double-capacity shuttle hook DP large-capacity shuttle hook 2DD/3.5" micro-floppy disk ewing area240mm Max. 176,000 stitches (max. 4,000 stitches/pattern) Max. 691 patterns % (0.1% step), by increasing/decreasing the stitch length or the number of stitches Provided as standard 0.55MPa (5.5kgf/cm 2 ), 1.8N /min 400W, 4P 550W, 2P 400W, 4P electronic-stop motor electronic-stop motor electronic-stop motor ingle-phase, 3-phase 1KV utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) 320kg 1,220mm (L)1,230mm (W)1,285mm (H)

150 OPTION Model Part No. Description Feature PGM-5 MU08 MU PV PX P WP D D D C C C C P4 Handy programming device Thread tension controller No.3 Needle thread clamp device Junction cord Needle cooler Milling unit Milling unit Cassette holder fixing base (asm.) Cassette holder (asm.) Cassette holder fixing base (asm.) Cassette holder (asm.) One-touch utility clamp M-223 M-224 M-223 M-224 Handy type of programming device provided with many different functions enable the operator to input data by operating the device near needle entries. The tension controller unit is used to partially change the needle thread tension during the sewing of a pattern. This device prevents the thread from tangling at the start of sewing. The needle cooler blows air to the needle, thereby preventing thread breakage caused by hot needle. The milling unit can be installed on the machine to allow the operator to easily machine a feeding frame or feed plate. The next material to be sewn can be placed between the top and bottom plates of the cassette holder while the machine is still engaged in the sewing of the currently set material. The feeding frame and the feed plate can be quickly changed without any tools. Part No Intermediate presser Description C D E F G Intermediate presser Intermediate presser C Intermediate presser D Intermediate presser E Intermediate presser F Intermediate presser G Intermediate foot (asm) L R RL,, E, F and G type L C R CRL C type L D type L Work clamp paper material () Work clamp paper material () Presser cloth sheet (t=1mm) Presser cloth sheet (t=3mm) Presser cloth sheet (t=2mm) C00 Feeding frame blank, right (with knurl) C00 Feeding frame blank, left (with knurl) C00 2-step feeding frame blank (without knurl) C00 Feeding frame blank plate (with knurl) C00 Feeding frame blank plate (without knurl) C0 Lower plate blank (without knurl) C0C Lower plate blank (with knurl) M C0D Lower plate blank (0.5mm, without knurl) C0 Lower plate blank (without knurl) M Needle hole guide ( =1.6) C Needle hole guide ( =2.0) Needle hole guide C ( =1.6) D Needle hole guide D ( =2.4) F Needle hole guide F ( =3.0) G Needle hole guide G ( =3.0) H Needle hole guide H ( =3.0) M-223C, 224C, 223P, 224P (eptember, 2003) 3/4

151 CONTROL PNEL The operator can easily create a sewing pattern on the spot by inputting sewing pattern data through the control panel according to a sewing sample or the feeding frame. The control panel is very helpful to the operator to input pattern data, to operate the sewing machine and to use the milling unit. s many as 176,000 stitches or 691 patterns can be stored in memory. s many as 4,000 stitches can be input for one sewing pattern. If the combination mode is used, as many as 20,000 stitches can be input for a pattern. utomatic obbin Changer for M K ERIE K-2: M-223C, M-224C K-5: M-223P, M-224P ll you need to do is set a magazine packed with bobbin cases onto the main unit of the M. The machine will automatically replace the bobbin thread whenever necessary (complete replacement only takes five seconds). One magazine can store a maximum of ten bobbin cases. The magazine can be easily attached/removed without any tools. This device is designed for attaching on the existing machine. Consequently, K-series can be attached to your M in use with ease. obbin replacement time can be set using the bobbin counter on the operation panel. The bobbin can also be replaced manually. The main unit of the device does not require compressed air for operation. The electrical circuit board is installed inside the control box of the M. Therefore the device can be smoothly installed on the machine, and only a small space is required for the installation. M-223C/K2 PECIFICTION WHEN YOU PLCE ORDER Number of bobbins that can be set in a magazine Period of time required to replace a bobbin Max. 10 pcs. pprox. 5 sec. K Power supply Can be connected through the main unit of M pplicable models pplication M-223C M-224C M-223P M-224P 2 5 For medium-weight materials H M-223C, 224C, 223P, 224P (eptember, 2003) 4/4

152 High-speed, Computer-controlled, Dry-head, ingle-thread Chainstitch, utton ewing Indexer CF The machine is equipped with a computer-controlled singlethread chainstitch button sewing machine. doption of a no lubricated machine head eliminates oil stains on sewing products. No oiling is required. Thanks to its computer-controlled feed, the machine now offers 39 different sewing patterns as standard. The machine responds to many different sewing specifications with greater ease end flexibility. ince the machine does not have a stop-motion mechanism, it requires no maintenance and offers a quiet work environment. The machine is provided as standard with a sewing thread tension change-over type "thread-fray-prevention function" to improve seam quality. The machine incorporates a high-speed machine head that offers a maximum sewing speed of 1,800rpm and a button feeder with higher button-supplying capacity for increased productivity. The stepping motor controls the material feed in increments of 0.1mm to ensure accurate button sewing at all times. One to 20 buttons can be sewn on every garment. Twenty patterns can be stored in memory. The machine can sew buttons on ladies' wear by changing the operation mode. In addition, with the use of optional attachments, it can also sew buttons on finished garments and long-sized garment. CF PECIFICTION WHEN YOU PLCE ORDER Model name Machine head titch system ewing speed pplicable button titching shape Needle (at the time of delivery) Number of button to be sewn Number of patterns that can be stored in memory Power requirement/ Power consumption Compressed air ir consumption Lubrication Dimensions Total weight CF M-1800D/R12 ingle-thread, chainstitch Max. 1,800rpm Type: Flat round button ize: 926mm uttons with diameters smaller than 10mm or larger than 16mm are available by special order.,,,,,,,,,,, (utton carrier for 3-holed buttons is available by special order.) TQ7 (#16) #14#20 120pcs. 20 patterns ingle-, 3-phase 200V/Power rating 600V 0.5MPa (5kgf/cm 2 ) 20N /min No lubrication (machine head installed) 1,860mm(W)970mm(D)920mm(H) 260kg For General Export For CE CF Power supply inglephase 3-phase 3-phase 220V 200V, 220V, 240V 380V Options Not provided Z econd work clamp Cloth suction device (MC16) E econd work clamp E Cloth suction device (MC16) Other options are separately available. D Q L CF (eptember, 2003) 1/2

153 PPLICTION IZE OF CLOTH D Feeding intervals 25650mm (0.1mm steps) F E C C D E F Total feeding amount Distance from the top end of the garment body to the first button Distance from the side end of the garment body to the button pplicable size of the garment to be sewn : 650mm (optional size: Max. 1,200mm) : 40140mm (optional size: Min. 20mm) 1225mm Width: mm Length: mm utton intervals can be respectively changed as desired UTTON CRRIER For 4-holed button Configuration of button carrier For 2-holed button Distance (mm): Distance between holes in button OPTION Distance (mm): Diameter of set pin Taper Part No Optional Q R T U V W F1 D X Z G1 H1 E1 Distance (mm): Distance between holes in button Distance (mm): Diameter of set pin Part No. (Packed together with accessories.) E F G L H M J N K P C For vertical 2-hole buttons For 3-holed buttons is available by special order. J1 Model Part No. Description Feature G uxiliary feed plate This part feeds heavy sewing products such as finished garments with great reliability. G Clamp for light-weight materials This part clamps easy-to-slack materials such as light cottons and silks to ensure reliable feeding. G uxiliary clamp The auxiliary clamp prevents long-sized sewing products from slacking in the direction of feed. G uxiliary clamp for the 1st button with shorter distance This clamp is used when there is only a short distance between the top of the garment body and the first button (40mm or less). (pplicable distance: 20 to 140mm) G econd work clamp This part is effective when sewing slippery materials. It clamps the stacked materials at all times. MC16 Cloth suction device The cloth suction device consistently feeds front facings that are not pressed, that are not topstitched, or that have a crease. pecify at the time of order where necessary. CF (eptember, 2003) 2/2

154 Computer-controlled, Lockstitch, utton ewing Indexer CF The machine incorporates a high-speed machine head that offers a maximum sewing speed of 2,300rpm and a button feeder with higher button-supplying capacity for increased productivity. The machine can sew buttons on ladies' wear by changing the operation mode. In addition, with the optional attachments, it can also sew buttons on finished garments and long-sized garment. Various options are available to further improve workability. ince the machine does not have a stop-motion mechanism, it requires no maintenance and offers a quiet work environment. Fastening stitches at the end of sewing ensures upgraded seam quality while preventing the thread from fraying. The machine is provided as standard with 29 different sewing patterns. This allows the machine to easily respond to many different sewing specifications. The stepping motor controls the material feed in increments of 0.1mm to ensure accurate button sewing at all times. One to 20 buttons can be sewn on every garment. Twenty patterns can be stored in memory. The machine is equipped as standard with a stacker that can accurately stack a great many garments. CF PECIFICTION Model name Machine head titch system Max. sewing speed Needle (at the time of delivery) Number of button to be sewn Number of patterns that can be stored in memory Lubrication Lubricating oil Power consumption Compressed air ir consumption Dimensions Total weight CF LK-1903/R26 Lockstitch 2,300rpm (normal: 2,000rpm) DP17 (#14) 120pcs. 20 patterns Centralized oil wick lubrication (machine head) JUKI New Defrix Oil No.2 (equivalent to IO VG32) 600V 0.5MPa (5kgf/cm 2 ) 20N /min 1,860mm (W)970mm (D)920mm (H) 270kg 12 WHEN YOU PLCE ORDER CF For General Export For North merica For CE Power supply inglephase 3-phase 3-phase 220V 240V 200V, 220V, 240V 380V, 415V, 440V 220V 380V 415V D E Q T K L M Option Not provided Z Cloth suction E device (MC16) Other options are separately available. CF (eptember, 2003) 1/2

155 PPLICTION IZE OF CLOTH D Feeding intervals 25650mm (0.1mm steps) F E C C D E F Total feeding amount Distance from the top end of the garment body to the first button Distance from the side end of the garment body to the button pplicable size of the garment to be sewn : 650mm (optional size: Max. 1,200mm) : 40140mm (optional size: Min. 20mm) 1225mm Width: mm Length: mm utton intervals can be respectively changed as desired UTTON CRRIER For 4-holed button Configuration of button carrier For 2-holed button Distance (mm): Distance between holes in button Distance (mm): Diameter of set pin Part No. Distance (mm): Distance between holes in button Distance (mm): Diameter of set pin Part No. (Packed together with accessories.) Optional Q E R F G T L U H V M W J F N D K X P Z C 3.2 Taper G H J E1 For vertical 2-hole buttons OPTION Model Part No. Description Feature G uxiliary feed plate This part feeds heavy sewing products such as finished garments with great reliability. G econd work clamp This part is effective when sewing slippery materials. It clamps the stacked materials at all times. G Clamp for light-weight materials This part clamps easy-to-slack materials such as light cottons and silks to ensure reliable feeding. G uxiliary clamp The auxiliary clamp prevents long-sized sewing products from slacking in the direction of feed. G uxiliary clamp for the 1st button with shorter distance This clamp is used when there is only a short distance between the top of the garment body and the first button (40mm or less). (pplicable distance: 20 to 140mm) MC16 Cloth suction device The cloth suction device consistently feeds front facings that are not pressed, that are not topstitched, or that have a crease. pecify at the time of order where necessary. CF (eptember, 2003) 2/2

156 Decorative leeve uttonholing Indexer CF-182 utomatic fine decorative sleeve buttonholing at uniform intervals can be achieved by simply setting the material in position. The left and right material clamping mechanism enables stable overlap operation. etting the material feed or the number of overedging stitches, selecting alternate sewing or the material feed direction etc., can be achieved by one-touch panel operation. PECIFICTION Model name Machine head Max. sewing speed titch length titch width titch pitch Needle bar stroke Lift of the presser foot Needle (at the time of delivery) No. of decorative sleeve buttonhole Distance decorative sleeve buttonhole peed of cloth feed Lubrication Lubricating oil Power consumption Compressed air ir consumption CF-182 MH-180/CH 2,700rpm mm mm mm 27mm 5mm CHMETZ #90, 1738 # mm 100mm/sec y an oiler (machine head) JUKI New Defrix Oil No.2 (equivalent to IO VG32) 270W 0.5MPa (5kgf/cm 2 ) 10N /min CF WHEN YOU PLCE ORDER CF182 Machine head pecifications tacker Power supply Cycles (Hz) MH-180/CH Ruler positioning type Wiper type Photoelectric positioning type Wiper type Ruler positioning type Wiper type utomatic swing type Photoelectric positioning type Wiper type utomatic swing type E F G H Not provided Provided 0 inglephase 100V 110V 115V 200V 220V 240V 200V 220V C F D E J K 50Hz 60Hz F G 3-phase 240V P 380V L 415V M CF-182 (eptember, 2003) 1/1

157 Electronic Handstitching Machine (for soft-to-the-touch stitch type) FL-350N (standard) FL-350N (for thick thread) Thorough studies on stitch structure helped us design a machine that could sew softer-feeling stitches. The machine produces consistentquality soft-feeling stitches with just the right slack to make them look as if they're just lying over the fabric. In addition, the regulating knob permits easy adjustment of stitch formation and provides a wider adjustment range. The machine can handle a wider variety of threads. It supports not only JUKI-specified threads, but also commercially available synthetic threads that are easier to purchase. (Please use the commercially available brands of synthetic thread designated by JUKI.) y pressing the thread-feeding switch with a material placed on the machine, the machine head rotates by 150 degrees, causing the lower looper to automatically draw in a 1,200mm length of thread. This eliminates the nimble finger-work conventionally required to measure the length of synthetic thread and arrange cut-to-length pieces of thread. FL-350N for thick thread (low-count thread) is now available. The machine is provided with specifications that are best suited to the topstitching of ladies' wear. PECIFICTION FL-350N TYPE OF TITCHE Model name Max. sewing speed mount of feed Needle (at the time of delivery) Thread (JUKI-specified threads) ewing thread length eam length Lift of the presser foot Lubrication Lubricating oil Power consumption Dimensions Total weight FL-350N 400rpm (specified thread) 300rpm (synthetic thread) ORGN DPN1032/38 CHMETZ 10321/38, 36 Handstitching thread: FUJIX's New Wax ilk (for light-weight materials) ynthetic thread: FUJIX's KING FIT #60 #60#50, 33, Nm=120/3 Max. 1,200mm Max. 1,000mm Max. 8mm FL-350N For thick thread 300rpm (specified thread) ORGN DPN10321/49 CHMETZ 10321/49 ynthetic thread: ONUKI LIMITED. CE CROWN (Tetoron) #8 #30#8, 4692, Nm=60/330/3 Max. 1,000mm Max. 800mm 7mm y an oiler JUKI New Defrix Oil No.2 (equivalent to IO VG32) 700W 1,200mm (W)800mm (D)870mm (H) 300kg addle stitch Long and short stitch hort and long stitch 13 WHEN YOU PLCE ORDER pplication For thick thread FL350N Destination For General Export For JE (CE) Power supply ingle-phase 100V120V 200V240V E 3-phase 380V L E D OPTION Part No. HL Description ROM for matching normal-/reversefeed stitches Needle bar (for needle size #38) Needle bar for thick thread (for needle size #49) titch ruler uspended ruler titch change-over hand switch Feature The reverse-feed stitch length is fixed at a factory setting of 1 to 2mm, but it can be easily matched to the normal-feed stitch length by appropriately replacing the ROM. This needle bar is to be used when you remodel your FL-350N to FL-350N. This needle bar is to be used when you remodel your FL-350N to FL-350N. For the FL-350N (provided as standard for the FL-350N) For the FL-350N (provided as standard for the FL-350N) FL-350N, 350N (eptember, 2003) 1/1

158 utomatic Pocket etter (for jeans) VP-875 The machine automatizes a series of pocket-setting processes, concurrently folding and sewing sequential pocket cloths in the production line, thereby resulting in substantial labor savings. With its newly developed large-hooked zigzag stitching lockstitch machine head, the machine runs at a maximum sewing speed of 4,000rpm and executes all of its operations with split-second response. The sum result: dramatically reduced cycle time and increased productivity. pocket cloth is folded on the table surface and properly tensed by a pocket style jig to create sharp creases without material slippage or bulging. The pocket cloth is vertically shifted and pulled to the suitable tautness for placement on the garment body. This prevents the pocket cloth from slipping out of the correct position and makes it easy to adjust folding timing. With this pocket-folding and pocket-positioning mechanism, the machine is widely adaptable to various materials. It takes only about five minutes to replace the pocket style jig including adjustment. ny tools are unnecessary for its attachment/removement. The pocket style jig can be attached/ removed without the use of any tools. The folding unit is sufficiently spaced from the machine head. This means large garment bodies do not interfere with each other even when right and left garment bodies are alternately processed on the table. The machine widely adapts to materials of various sizes and many different sewing specifications. VP-875 (with automatic bobbin thread winding and feeding device W-2) When the VP-875 is equipped with the W-2, the production capacity results in increase by as much as 10%. obbin replacement by W-2 is fully synchronized with the sewing operation of the VP-875. VP-875 PECIFICTION Model name Machine head Max. sewing speed ewing area titch length Needle bar stroke Needle (at the time of delivery) Hook utomatic bobbin winding and feed device (W-2) ize of bobbin and bobbin case obbin thread replacement Needle thread breakage detection tacking capacity Number of patterns that can be stored in memory Memory medium Feeding method Lubrication Lubricating oil Power requirement Power consumption Compressed air ir consumption Total weight VP-875 VP-875 High-speed, 1-needle, lockstitch, zigzag stitching machine (exclusive machine head) 4,000rpm 250mm (L)240mm (W) mm 35mm CHMETZ 134E ERV7(Nm130) Horizontal-axis full-rotary hook Provided as standard 1.7 fold 1.4 fold (specifically designed for the W-2) Manual utomatic (W-2) Provided as standard Max. 64 pieces of jeans bodies Max. 691 pattern 2DD/2HD 3.5" micro-floppy disk C servomotor, X-Y clamp drive utomatic (machine head) JUKI New Defrix Oil No.1 (equivalent to IO VG7) ingle-phase V, 3-phase 200V, V, V 600V 0.5MPa (5.0kgf/cm 2 ) 120N /min 220N /min (max.) 600kg 1, Dimensions Main unit 1,160 tacker (Unit: mm) The automatic bobbin thread winding and feeding device (W-2) cannot be mounted on the VP-875 after setup. VP-875, 875 (eptember, 2003) 1/2

159 WHEN YOU PLCE ORDER VP875 Type With W-2 inglephase 3-phase Power supply V V V 200V for CE E P N M Configuration Not used Round-bottom type lade-shape bottom type Trapezoidal-bottom type ilge-shaped-bottom type quare-bottom type Others Pocket style jig Z C D E X Kind for each configuration Label-inserting device Not provided Z Not provided : Z Provided : Garment put base Not provided Provided Not provided Provided Option Marking light Not provided Not provided Provided Provided Z C TRIL CLCULTION OF PRODUCTIVITYTRIL CLCURTION CONDITION Time lost due to causes other than bobbin replacement Time lost due to bobbin replacement Total time lost in one day (allowance rate) Daily production (8-hour operation) Effect of introduction of W-2 OPTION VP-875 3,775 seconds in 8 hours 2,664 seconds in 8 hours 6,421 seconds in 8 hours (29 %) 2,131 pockets VP-875 3,946 seconds in 8 hours 0 seconds in 8 hours 3,946 seconds in 8 hours (16 %) 2,367 pockets Production: Increase by 236 pockets in 8 hours (11 % increase) Time lost: Reduced by 2,475 seconds in 8 hours (39 % reduction) llowance rate: 13 % decrease Thread: pan #20 obbin thread consumption: 1.2 m/pocket Time required to manually replace the bobbin: 25 sec/case Cycle time: 10.5 sec/pocket llowance rate (excluding bobbin replacement): 15 % The time lost for the VP-875 includes the time required to operate the W-2 (189 seconds in 8 hours). Daily production and effect of introduction of the W-2 vary with sewing conditions. Model Part No. Description Feature PGM-6 Handy programming device If the handy programming device is connected to the main unit of the pocket setter, sewing data can be established and modified. G G Marking light Garment put base The marking light helps you easily position a pocket and garment body on the machine. When mounted on the main unit, the garment put base is quite helpful of sewing either right or left garment bodies in succession. Label-inserting device label can be inserted either into the right- or left-hand side of a pocket cloth. cylinder-type label-inserting device that can be directly mounted on the pattern board is also available. When placing on order for a pocket style jig, specify label-inserting device, if necessary. PRE-FOLDED POCKET TYLE (OPTIONL) This is a pocket style jig to be used exclusively for sewing pocket pieces onto the garment body after they have been folded in a separate process. The pre-folded pocket style jig consists of three components, i.e., the "clamp frame," "clamp upper plate" and "clamp lower plate." Changes in pocket size and design are accommodated by replacing the clamp upper plate and lower plate with appropriate ones. The clamp upper plate and lower plate are less expensive than the conventional pocket style jigs. The use of the prefolded pocket jig in highly flexible small-lot production reduces the running costs of the VP-875. The clamp upper plate and lower plate can be attached and removed to and from the clamp frame quickly and easily. Even when using the pre-folded pocket style jig, the machine can sew at speeds as high as 4,000rpm, dramatically boosting productivity. The folding mechanism of the pocket setter does not support a trapezoidal-design pocket. With the pre-folded pocket style jig, however, this type of pocket piece can be sewn onto a garment body if it has been folded into a trapezoidal shape in advance. Clamp frame (asm.) Part No. G G G Description Clamp frame (asm.) Clamp upper plate blank (asm.) (clamp upper plate/lower plate, combined) Magnet mounting plate (asm.) (magnet for retaining the upper plate) Clamp upper plate (machined) VP-875, 875 (eptember, 2003) 2/2 Clamp lower plate (machined)

160 utomatic Pocket Welting Machine with utomatic Welting Patch Feeder PW-297 (for straight pocket with flap) PW-297 (for sewing bottoms) PW-298 (for slanted pocket with flap) Newly developed welting patch cutting device and automatic flap/ pocket bag feeder are now optionally available. These components work to upgrade seam quality and further increase productivity over all processes, including the afterprocess. The length of thread remaining after thread trimming is further reduced and results in cutting operation of thread picking. s many as 100 different patterns can be stored in memory and 10 different cycle sewing programs can be established. PW-298 The function to separately drive the needle bars allows flexible setting of the welt angle, - a key advantage in the flexible sewing of various kinds of pocket shapes such as slant pockets and welt pockets. PECIFICTION PW-298 Max. sewing speed titch length Regular stitching Fastening stitching Kinds of welts Model name ewing length (welt length) afety stitching ack-tack stitching PW-297 For straight pocket with flap Parallel double welt, parallel single welt (with/without flaps) Number of patterns that can be stored in memory Number of cycles that can be stored in memory Needle gauge Needle (at the time of delivery) ORGN Mt190 (#16) #16#18 CHMETZ 190R (Nm100) Nm100Nm110 Needle bar stroke 34.4mm Thread Hook Machine head 2-needle, needle-feed, lockstitch machine with center knife Machine head motor Thread take-up Lubrication Lubricating oil Needle-feed system Cloth feeding system utomatic welting patch feeder obbin thread remaining amount detecting device obbin winder Power consumption Compressed air and air consumption Total weight 330kg Dimensions (excluding the stacker) The machine also supports longer sewing length (220mm). When the needle gauge of 14mm is used, the corresponding optional parts must be purchased. PW-297 PW-298 For sewing bottoms For slanted pocket with flap 3,000rpm (1,0003,000rpm) : 2.5mm (2.03.4mm) : 1.0mm (0.51.5mm) : 2.0mm (0.53.4mm) 18180mm (in increments of 1mm) (as small as 25mm when the corner knife is used) 100 patterns Parallel double welt, parallel single welt, slant double welt, slant single welt, trapezoidal stitching (with/without flaps) 10 programs (1 program Combination of 5 patterns at the maximum) 10mm, 12mm, 14mm (optional ) PUN #50 Vertical-axis 1.6 fold-capacity hook Compact C servomotor (direct-drive system) lide type y an oiler (machine head and hook) JUKI New Defrix oil No. 2 (equivalent to IO VG32) tepping motor control y servomotor drive Provided as standard Provided as standard y an external motor 550W 0.5MPa (5.0kgf/cm 2 ), 40N /min 980mm (W)1,650mm (D)1,200mm (H) ORGN DP17 (#16) #16#18 CHMETZ Y3355 (Nm100) Nm100Nm mm 2-needle, needle-feed, lockstitch machine with an organized split needle bar and center knife 350kg PW-297, 297, 298 (eptember, 2003) 1/4 13

161 WHEN YOU PLCE ORDER utomatic welting patch feeder : utomatic welting patch feeder (right) 102 Welting patch cutting device R tacker Not provided P44 Clamp bar stacker P45 Roller stacker Z N P ingle-welt change-over function Not provided 111 (right) Z G Power supply ingle-phase 220V 220V 3-phase 380V D K L PW utomatic flap feeder Not provided 103 utomatic flap feeder (left) 104 utomatic flap and pocket bag feeder (left) Pocket lip width (needle gauge: mm) Z Double-welt ize of welt patch base plate L-size Pocket lip width (needle gauge: mm) C Double-welt L R Pocket lip width (Needle gauge) Welt patch and welt patch base plate R-size Pocket lip width (needle gauge: mm) Right single-welt Right single-welt L R Pocket lip width (Needle gauge) ize of welt patch base plate L-size R-size M4 M5 Option Name of optional device Not provided 106 Dart stretcher/ 107 utomatic pocket bag presser/ 108 uction device/ 109 utomatic interlining feeder /108/ / / /108/ 91 uction motor/ /107/ /107/108/91 106/108/91 106/116 Vacuum table 106/107/ /108/ 105 utomatic pocket bag feeder (right) 106/108/105/ / 115 utomatic interlining presser 106/107/108/91/ /91/ /106/ him device 106/107/108/91/73 The same optional parts are offered for the PW-297 and PW-298. ZZ J0 J1 J2 J3 J4 J5 J6 J7 J8 J9 K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 PW-297, 297, 298 (eptember, 2003) 2/4

162 WHEN YOU PLCE ORDER PW-297 (for sewing bottoms) utomatic welting patch feeder : utomatic welting patch feeder (left) 102 Welting patch cutting device (left) L tacker Not provided P44 Clamp bar stacker P45 Roller stacker Z N P ingle-welt change-over function Not provided 111 (left) Z H Power supply ingle-phase 220V 220V 3-phase 380V D K L PW297 utomatic flap feeder Not provided 103 utomatic flap feeder (right) Z C Pocket lip width (needle gauge: mm) C Option Name of optional device Not provided 106 Darts stretcher 106/108 uction device ZZ J1 J3 106/107 utomatic pocket bag presser J4 Double-welt Left single-welt 106/107/ /107/108/91 uction motor J7 J8 L R Pocket lip width (Needle gauge) L R Pocket lip width (Needle gauge) 106/108/91 106/116 Vacuum table J9 K0 Welt patch and welt patch base plate 106/107/116 K1 Double-welt Left single-welt Pocket lip width (needle gauge: mm) ize of welt patch base plate L-size R-size Pocket lip width (needle gauge: mm) ize of welt patch base plate L-size R-size M M7 PW-297, 297, 298 (eptember, 2003) 3/4

163 NEWLY DEVELOPED DEVICE (OPTIONL) ince optional parts can't be retrofitted to the machine after purchase, be sure to specify any that you may need when placing your order. Model Description Feature The knife is motor-driven. To cut the welting patch as short as possible, it automatically adjusts itself to the sewing length established on the operation panel. This enables more consistent welting patch feed and folding operations. The welting patch cutting knife is located under the welting patch table. This keeps the knife from damaging the 102 Welting patch cutting device garment body. In addition, the knife can be changed with ease. Welting patch cutting, a job conventionally done by hand in the after-process, is no longer required. The result is a substantial reduction in the processing time. The clamp exclusively used during welting patches cutting allows the cutting device to cut welting patches even when the binder is in the lower position. This further eliminates wasted time due to welting patch cutting. 103 utomatic flap feeder The fulcrum at the center of the automatic flap feeder claw clamps flaps securely and automatically feeds them to the sewing position. This promises increased productivity utomatic flap and pocket bag feeder utomatic pocket bag feeder (right) The device works to sew the flap and pocket bag at the same time with the pocket bag placed on the flap. imultaneous sewing of a flap and pocket bag produces beautifully finished welts free from uneven material feed. In addition, there's no longer any need to attach the pocket bag on the flap side, a task normally required in the after process. This device is intended to be used with 104 (automatic flap and pocket bag feeder) to automatically sew pocket bags on both sides of a welting patch. OPTION The same optional parts are offered for the PW-297 and PW-298. They can be retrofitted to either machine. Model 73N Part No. G G G G G Description uxiliary receiving plate (right) Dart stretcher utomatic pocket bag presser utomatic interlining feeder tand for standing work Feature This is the receiving plate for accessories for welting patches, etc. The dart stretcher holds the end of the material when making a welt on a darted part of the material to make it easier to set the darted part and improve the reliability of the welting. The automatic pocket bag presser is used to hold pocket bags under the garment body when welting and pocket bag sewing are performed concurrently. To improve workability, the automatic interlining feeder automatically delivers rolled interlining cloth onto the table and cuts it. This stand is mounted under the main body of the machine to adjust the height of the main body to standing work. 111 G The device opens/closes the clamp foot by fingertip control. This enables easy changeover of Right single-welt and doublewelt changeover device the sewing machine specification between double-welt and right-single-welt types simply by changing the binder. 112 G him device This device encloses a garment body between its upper and lower parts and feeds it to the needle entry area. It is especially useful for difficult-to-feed garment bodies P44 P45 G G G G utomatic interlining presser Table for vacuum type uction device uction motor Clamp bar stacker Roller stacker This device is used for securing interlining under garment body for sewing. The device picks up the garment body by suction force to facilitate setting of materials on the machine. Use the device with a suction motor (91). This is the blower motor for the suction device (108). ince the main body of the stacker swings around to catch a material, even smaller garment bodies can be consistently stacked (350 mm from the pocket position at the minimum). tacked garment bodies are secured with the bar. This prevents a stacked garment body from slipping down. This is a stacker suited for small articles that cannot be feed by a bar stacker or grasping stacker. PW-297, 297, 298 (eptember, 2003) 4/4

164 utomatic Pocket Welting Machine PW-194N (for without flap type) PW-195N (for flap sewing type) PW-196N (for slant pocket sewing type) Productivity is increased by equipping the machine with a sewing speed capability of 2,500rpm. With its improved material-clamping force during jumping and its newly adopted Teflon-coated binder that provides smoother material feed, the machine can reliably feed garment bodies and welting patches made of slippery materials to the sewing position. The result is beautifully finished seams with no slippage between the garment fabric and welting patch. The machine also retains data on ten different patterns, including data on stitching length, stacker operation, etc. Cycle sewing with up to five combined patterns can be executed. With this feature, the machine offers higher productivity in welting on semi-custommade garments under one-pattern-one-garment sewing system. The machine offers improved welting capabilities and is compactly designed to allow efficient use in limited production spaces. PW-194N The corner knife intervals can be automatically and accurately adjusted simply by setting a sewing length on the operation panel, ensuring that welts are finished with consistent quality at all times. PW-195N, PW-196N When attaching flaps, the flap sensor detects the flap length for the accurate adjustment of the sewing length and corner knife intervals. ince the machine produces welts of consistent quality regardless of the welting length, it can be widely used for the continuous sewing of welts of different lengths. PECIFICTION PW-196N PW-196N The machine is provided as standard with a turrettype set of seven pairs of corner knives that can be quickly selected and switched over in a single-motion. ewing of welts requiring different cutting angles and depths can be easily set to respond to the pattern invoked on the operation panel. Model name ewing speed Regular stitching titch afety stitching length Fastening stitching ack-tack stitching Kinds of welts ewing length (welt length) Number of patterns that can be stored in memory Cycle sewing Needle gauge Needle (at the time of delivery) Needle bar stroke Thread Hook Machine head Thread take-up Lubrication Lubricating oil Cloth feed system obbin thread remaining amount detecting device Power consumption Compressed air and air consumption Total weight Dimensions (excluding the stacker) Height of table PW-194N PW-195N PW-196N For without flap type For flap sewing type For slanted pocket sewing type Normal 2,500rpm (1,0002,500rpm) : 2.0mm (2.03.4mm) : 1.0mm (0.51.5mm) : 2.0mm (1.03.4mm) Parallel double-welt, parallel singlewelt parallel variant double-welt (without flaps) Parallel double-welt, parallel singlewelt parallel variant double-welt (with/without flaps) Needle gauge 812mm: 35180mm, Needle gauge 14mm or more: 50180mm y using the corresponding optional device, sewing length can be set to 18mm or more. However, for the sewing length of 21mm or less, neither the center knife nor the corner knife can be used. 10 patterns Possible (max. 5 different patterns can be combined) 8, 10, 12, 14, 16, 18, 20mm ORGN Mt190 (#16) #16#18 CHMETZ 190R (Nm100) Nm100Nm mm PUN #50 Vertical-axis full-rotary 1.6 fold-capacity hook 2-needle, lockstitch machine with center knife lide type y an oiler (machine head and hook) JUKI New Defrix Oil No.2 (equivalent to IO VG32) y a servomotor drive Provided as standard 500W 0.5MPa (5.0kgf/cm 2 ), 40N /min 200kg 735mm (W)1,250mm (D)1,200mm (H) 820mm Parallel double-welt, parallel singlewelt slant double-welt, slant singlewelt trapezoidal stitching (with/without flaps) ORGN DP17 (#16) #16#18 CHMETZ Y3335 (Nm100) Nm100Nm mm 2-needle, lockstitch machine with organized split needle bar and center knife 220kg PW-194N, 195N, 196N (eptember, 2003) 1/4 13

165 WHEN YOU PLCE ORDER Pocket lip width (needle gauge: mm) Knife Right Left For PW-194N, only "2" of "left-knife" is available. Double-welting C D E F G Option ee the under of this sheet. PW 194N 195N 196N tacker Not provided P41 (grasping stacker) P42 (bar stacker) P43 (roller stacker) P42+P43 (roller bar stacker) : Main stacker : Can be combined Main unit main unit with a side cover him-type main unit with a side cover Main unit with a side cover for vacuum device 194N Z 195N 196N ingle-welting Z J K L M C ingle-welt change-over function Not provided 97N left 97N right 97N both-side 98 left 98 right inglephase Power supply 3-phase 194N 220V 230V 240V 220V 230V 240V 380V V 440V 195N 196N D G E K Q P L M N For PW-195N, -98 of single-welt change-over function is delivered as standard. Z D E F L R L R Pocket lip width (needle gauge) Pocket lip width (needle gauge) Double-welt ize of welt Patch base plate L-size R-size Left L R L R Pocket lip width (needle gauge) Pocket lip width (needle gauge) Pocket lip width (needle gauge) Welt patch and welt patch base plate ingle-welt ize of welt Patch base plate L-size R-size J0 J1 J2 J3 J4 J5 J6 Pocket lip width (needle gauge) Right L R L R Pocket lip width (needle gauge) Pocket lip width (needle gauge) ize of welt Patch base plate L-size R-size L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 M0 M1 M2 M3 Pocket lip width (needle gauge) Variant double-welt ize of welt Patch base plate L-size R-size Options : Can be attached to the machine : Provided as standard (not included in options) with the machine PW-194N PW-195N PW-196N Name of optional devices Table type Table type Table type him Vacuum him Vacuum him Vacuum ZZ Not provided 2 84 Dart stretcher 6 92 Pocket bag clamping device 7 88 Table stand for standing work 8 89 mall welt sewing device 1 94 Center reference device 5 74/84/86N 8 84/92 C2 74 Pattern-matching marking device E9 101 Pocket bag clamping device F1 84/101 F3 84/89/90N/101 G0 86N utomatic interlining feeder G1 84/86N G2 86N/89 G3 90N uction device G4 90N/91 G5 96N Flap presser device G6 84/96N G7 88/96N H1 84/92/90N H2 88/89 PW-194N, 195N, 196N (eptember, 2003) 2/4

166 OPTION Model Part No. Description Feature 84 G Dart stretcher The dart stretcher holds the end of the material when making a welt on a darted part of the material to make it easier to set the darted part and improve the reliability of the welting. 85N G-85000D0 G-85000E0 G-85000F0 Needle gauge: 8, 10, 12mm Needle gauge: 14, 16mm Needle gauge: 18, 20mm him device This device encloses a garment body between its upper and lower parts and feeds it to the needle entry area. It is especially useful for difficult-to-feed garment bodies. 86N G-86000D0 G-86000E0 Needle gauge: 816mm Needle gauge: 18, 20mm utomatic interlining feeder To improve workability, the automatic interlining feeder automatically delivers rolled interlining cloth onto the table and cuts it. 88 G tand for standing work This stand is mounted under the main body of the machine to adjust the height of the main body to standing work. 89 G mall-welt sewing device This device is designed for the sewing of small welts as short as 35mm or less. The smallest possible welt size is 18mm. (Neither the center knife nor corner knife can be used for welts measuring 21mm or less.) 90N G-90000G0 G-90000H0 G-90000I0 G G Needle gauge: 812mm Needle gauge: 14, 16mm Needle gauge: 18, 20mm uction motor (for sim type table) utomatic pocket bag presser (for sim type table) utomatic pocket bag presser (for standard table and vacuum type table) uction device (for sim type table) The device picks up the garment body by suction force to facilitate setting of materials on the machine. Use the device with a suction motor (91). This is the blower motor for the suction device (90N). The automatic pocket bag presser is used to hold pocket bags under the garment body when welting and pocket bag sewing are performed concurrently. This device equipped as standard for PW-194N. (92 or 101) 94 G-94000C0 Center reference device This optional device is useful to sew welts oriented longitudinally from the center of maximum-sized welts. It is intended for the sewing of welts with darts placed in the direct front-to-back center of the welting length. 96N G G Needle gauge: 814mm Needle gauge: 1620mm The device is effective when used for sewing welts with flaps. 97N 98 G-97000G0 G-97000H0 G-97000I0 G-97000J0 G-97000I0 G-97000J0 G Needle gauge: 814mm (for left) Needle gauge: 1620mm (for left) Needle gauge: 814mm (for right) Needle gauge: 1620mm (for right) Needle gauge: 814mm (for double) Needle gauge: 1620mm (for double) ingle-welt and double-welt change-over device ingle-welt and double-welt change-over device (for PW-195N, PW-196N) The clamp foot can be moved by fingertip control. The sewing machine is well suited for the sewing of welts on upper garments since its specification can be easily changed over between double-welt type and single-welt type simply by changing a binder. The machine comes in three different types: the left singlewelt type for sewing left single-welts, the right single-welt type for sewing right ones, and the double-side welt type designed to change over the welt type between the left and right single-welt types. The clamp foot can be shifted by a simple one-touch operation. Changeover between double-welt and single-welt sewing can be easily accomplished by replacing the binder. The single-welt changeover function comes in two different types: the right-hand single-welt type and left-hand single-welt type. This device equipped as standard for PW-195N. 13 P41 Grasping stacker The general-purpose stacker has a wide range of applications, including men's wear, ladies' wear, sportswear, jumpers, etc. P42 ar stacker This stacker is suited to welting on the hip pockets of slacks, pants of working uniforms, etc. P43 Roller stacker This is a stacker suited for small articles that cannot be feed by a bar stacker or grasping stacker. EWING MCHINE COMPONENT Needle gauge Throat plate asm. Needle clamp asm. Knife Needle thread counter knife Needle thread clamp plate For knife, left For knife, right Part No. Part No. Part No. Part No. Part No. Part No. 8mm (5/16") 10mm (25/64") G J0 G mm (15/32") 14mm (35/64") G C0 G D mm (5/8") 18mm (45/64") G E0 G F mm (25/32") G G For PW-195N, PW-196N PW-194N, 195N, 196N (eptember, 2003) 3/4

167 WELT PTCH E PLTE COMPONENT R C L T Welt pach ruler Clamp foot spacer Clamp foot collar setscrew Foot collar Needle gauge 8mm (5/16") 10mm (25/64") 12mm (13/32") 14mm (35/64") 16mm (5/8") 18mm (45/64") 20mm (25/32") ize (mm) L 7.3 R 7.3 L 7.3 R 3.3 L 3.3 R 7.3 L 9.3 R 9.3 L 9.3 R 4.3 L 4.3 R 9.3 L 11.3 R 11.3 L 11.3 R 5.3 L 5.3 R 11.3 L 13.3 R 13.3 L 13.3 R 6.3 L 6.3 R 13.3 L 15.3 R 15.3 L 15.3 R 7.3 L 7.3 R 15.3 L 17.3 R 17.3 L 17.3 R 8.3 L 8.3 R 17.3 L 19.3 R 19.3 L 19.3 R 9.3 L 9.3 R 19.3 ingle-welt Welt pach ruler Clamp foot spacer Clamp foot collar setscrew Foot collar Part No. T Part No. Part No. Part No M TP M TP M TP M TP M TP M TP M TP M TP M TP M TP M TP M TP M TP M TP (L=31) Double-welt Welt pach ruler Clamp foot spacer (right and left each one) Clamp foot collar setscrew (right and left each one) Foot collar (right and left each one) Needle gauge ize (mm) Part No. T Part No. Part No. Part No. 8mm (5/16") L R mm (25/64") 12mm (13/32") L R L R M TP mm (35/64") L R mm (5/8") L R mm (45/64") 20mm (25/32") L R L R M TP PW-194N, 195N, 196N (eptember, 2003) 4/4

168 utomatic 2-needle elt-loop ttaching Machine MOL-254 The new machine head specifically developed for belt-loop attaching machines runs at a maximum sewing speed of 2,500rpm and is equipped with a direct-drive system that improves start up performance and shortens sewing time. The belt-loop feeding device is now provided with a halfway standby capability for subsequent belt-loops, and its faster belt-loop supply action shortens the time required for supplying belt-loops and helps speed up the machine time to 1.2 seconds per belt-loop (with 28 stitches). elt-loops are fed out by the conventional gear-roller feeding mechanism and also drawn out by the new drawing mechanism on the clamp device. upported by these two mechanisms, the folding fork catches "curled" or "creased" belt-loops every time and supplies them to the head. The machine preliminarily detects each splice in the belt-loops and efficiently disposes them. This means that even when the machine carries out the splice-disposal procedure, the belt-loop feeding device can complete its belt-loop supply action and supply the next belt-loop well before the machine starts to sew. s a result, the operator can perform rhythmical and efficient sewing work with no delay in cycle time. The number of stitches to sew a belt-loop can be switched between; 28-, 36- and 42-stitches, and the bartacking size can be easily changed through the operating panel. What's more, the user can create his/her own original sewing patterns in addition to the standard ones using JUKI's PGM-20 programming software developed for computer-controlled sewing machines. MOL-254 PECIFICTION Model name Machine head Max. sewing speed Thread take up Needle bar stroke Thread Needle (at the time of delivery) Hook Lift of the presser foot Number of stitches Needle gauge artacking length artacking width Number of pieces of bartacking data that can be stored in memory elt-loop width Finished length of belt-loop Machine time Positioning of the front hook obbin winder Lubrication Lubricating oil Power requirement and power consumption Compressed air and air consumption Total weight Dimensions Height of the top surface of the throat plate as from the floor surface MOL-254 Computer-controlled, 2-needle, lockstitch bartacking machine 2,500rpm Link type 45.7mm pun thread, cotton thread #50#30, 3346, Nm=120/360/3 DP17 (#21) #19#21 Horizontal-axis 1.8 fold-capacity shuttle hook 21mm 28, 36, 42 (selectable on the operating panel) 4070mm (1-37/64"2-3/4") 722mm (9/32"55/64")adjustable in increments of 0.1mm 13.2mm (3/64"1/8")adjustable in increments of 0.1mm 9 (99 patterns if optional ROM is added) 920mm (23/64"25/32") 4878mm (1-57/64"3-5/64") 1.2 sec./belt-loop (28 stitch) Driven by motor (the distance between the hook can be established in increments of 0.01mm) Electric type (provided as standard) Centralized oil wick lubrication (machine head) JUKI New Defrix Oil No.2 (equivalent to IO VG32) ingle-/3-phase, 350V 0.5MPa (5kgf/cm 2 ), 32N /min 230kg 1,200mm (W)800mm (D)1,350mm (H: in its lowest end) 9201,250mm (provided with the adjustable stand capability) MOL-254 (eptember, 2003) 1/2 13

169 WHEN YOU PLCE ORDER MOL254 Power supply Option V D No options Z ingle-/3-phase V L elt-loop tension releasing device (fullness) V (For CE) M elt-loop feeding device ir gun C Needle cooler D Needle thread breakage detector E Enter codes of required options in alphabetical order. FINIHED ELT-LOOP TITCH IZE The applicable loop width for the cross-cutting device is increased. In this model, both the cross-cutting device and the straight-cutting device can now cut loop up to 20mm width. The machine is factory-equipped with cross-cutting device at the time of delivery. Cross cutting (standard) traight cutting 1519mm (19/32"3/4")(depending on the loop width) 4mm 11mm (5/32") (7/16") 11mm (7/16") 4mm (5/32") 920mm (23/64"25/32") 920mm (23/64"25/32") 4070mm (1-37/64"2-3/4") 4878mm (1-57/64"3-5/64") 4070mm (1-37/64"2-3/4") 4878mm (1-57/64"3-5/64") OPTION Part No. G G G G G Description elt-loop tension releasing (fullness) elt-loop feeding device (belt-loop slackener) ir gun assembly Needle cooler Needle thread breakage detector Feature The device slackens the belt-loop when attaching it on the garment body. The cylinder type belt-loop feeding device supports the belt-loop feeding of the main unit. The device cools the frictional heat generated by the needle during sewing. The device detects breakages in the needle thread by means of a thread take-up spring. If a needle thread breakage is detected, the device halts the sewing of the next loop. MJOR PRE PRT Part No. G D DC HL Description Upper knife (loop cut knife) huttle, H type huttle race ring complete, C type Needle hole guide Moving knife junction Lower plate blank EP-ROM for data Remarks Exclusive to MOL-254 lso used with the M-210D lso used with the M-210D lso used with the MOL-154 lso used with the MOL-154 lso used with the MOL-154 lso used with the LK-1900 MOL-254 (eptember, 2003) 2/2

170 utomatic erging Machine N-697 (High-grade type) N-695 ( type) The N eries machine has been provided with the capability of sewing light-weight materials, and a low-tension sewing feature to enable sewing according to the material to be sewn, as well as achieving consistent high-quality seams free from slip-off seams at curved parts of the material. The machine offers high-speed performance with its maximum sewing speed of 8,000rpm. With this feature, the machine makes the most out of its original capabilities as a serging machine to help dramatically increase productivity. The machine is fully equipped with mechanisms developed through a full consideration for seam quality. The machine, therefore, supports any type of material. The machine can be adjusted externally according to the material to be sewn. The N-697 is provided as standard with a cloth control device, curl blower, in-curve and out-curve detecting sensor, cloth feed table air blower, as well as other helpful mechanisms. When the machine sews crotches or joins the seat seams of slacks, the in-curve and out-curve detecting sensor detects sharp in-curves and out-curves to automatically control the sewing speed. utomatic shirring is also possible at desired sections of the material by programming sewing data. The machine adopts an air-driven feed mechanism for feeding materials while preventing the material from slipping off the needle entry point. N-697 WHEN YOU PLCE ORDER 13 N697 N695 Overedging width (mm) C Power supply For General ingle-phase V 07 Export 3-phase V 11 For CE ingle-phase V 34 uxiliary table Not provided Z Provided ilencer Not provided Z Provided Cloth control device Not provided Provided Cord Z Cloth receiving board Not provided Provided Cord Z tacker, pedal, differential feed mechanism, cloth feeding device and table air blower tacker Pedal Differential ir blower Cloth feeding Differential tacker 2-pedal feed device device feed Z C D E H M N P 2-pedal unit: tacker pedal Differential feed pedal tacker, pedal, differential feed mechanism, cloth feeding device and table air blower tacker Pedal Cloth feeding Differential tacker 2-pedal device feed Z C D E M N Differential feed device and table air blower is equipped as standard with the machine 2-pedal unit: tacker pedal +Differential feed pedal N-697, N-695 (eptember, 2003) 1/2

171 PECIFICTION Model name N-697 N-695 Machine head Exclusive for MO-6904 Max. sewing speed 8,000rpm titch length mm Lift of the presser foot Max. 7mm Overedging width (mm) 4.0, 4.8, 5.6 Needle (at the time of delivery) DC27 #11 (#9#14) Chain-off thread trimmer T038 (suction type side cutter) Cutting curve: 200R or more (40R more when cloth control device is used) ewing specifications Cloth size: Width 400mm or less, Length 480mm or more (length for which stacking is possible) Number of cloth: Limited to 1 Class of work Men's slacks, one-piece, skirt, pants, coat etc. Power supply ingle-phase / 3-phase Power consumption 700W Compressed air and 0.5Mpa (5kgf/F), 220NR/min. 0.5Mpa (5kgf/F), 170NR/min. air consumption (when the stacker is used: 250NR/min.) (when the stacker is used: 200NR/min.) Lubrication utomatic Lubricating oil JUKI Machine Oil 18 (equivalent to IO VG18) Total weight 190kg (when all the optional devices are installed: 215kg) 180kg (when all the optional devices are installed: 210kg) 2-needle overlock type model is available for order. Please contact JUKI distributors or agents in your area for more information. FUNCTION COMPRION TLE Function, device N-697 N-695 pecifies a sewing speed Touch panel (provided as standard) Touch panel (provided as standard) peed control function Can be set at either automatic or manual Manual Cloth control device Provided as standard Optional Cloth feeding device Optional Optional Table air blower Provided as standard Optional Cloth receiving board Provided as standard Optional Partial shirring function Provided as standard Optional Curve detecting function (both out-curve and Provided as standard Not provided in-curve are detected) Curl blower Provided as standard Not provided Table lifting device Provided as standard Not provided tacker Optional Optional DIMENION (mm) ingle stacker Double stacker Cloth receiving board Main body uxiliary table OPTION Description Part No. Please refer to FUNCTION COMPRION TLE. N-697 Model name N-695 ingle stacker/40 Optional Optional Double stacker/42 Optional Optional ilencer for chain-off thread suction device GMC Optional Optional Table air blower G Provided as standard Optional Cloth receiving board Provided as standard Optional Cloth control device Provided as standard Optional Cloth feeding device G Optional Optional Differential feed device Provided as standard Optional uxiliary table G Optional Optional Differential feed pedal (for N-697) G Optional tacker pedal G Optional Optional 2-pedal unit (for N-697) G Optional Feature The max. number of garments that can be stacked is 40 (without pedal) The max. number of garments that can be stacked is 140 (without pedal) For reducing the air suction noise of the chain-off thread suction unit ir blower blows air to help facilitate the smooth feed of the material during sewing. The table for retaining materials before they are sewn. (1200mm (L)350mm (W)) With this optional device, the machine is able to sew, at a minimum, curved sections with R40mm. The device feeds short materials to a position where they can be stacked. With this device, the machine automatically shirr desired sections of the material by programming data. The part facilitates handling of long-size materials such as slacks and white overalls. With this part, the operator is able to manually shirr desired sections of the material. The part is used to start/stop the machine and open/close the cloth retaining bar. tacker pedal Differential feed pedal N-697, N-695 (eptember, 2003) 2/2

172 C ERVOMOTOR/ELECTRONIC-TOP MOTOR ERIE C-910 CONTROL OX C-910/M91 CONTROL OX/COMPCT MOTOR UNIT C-910 model control box is resistant to voltage fluctuations. It comes with a compact and energy-saving type switching power supply system that does not use a transformer. This contributes to improved reliability. The M91 model compact motor unit featuring low vibration and low noise capabilities is installed on the control box. The number of revolutions can be selected from among three different types (standard, slow and fast) according to the preference of the operator. In addition to this feature, the control box incorporates many different functions for upgraded workability. C-910 C-910/M91 OPERTION PNEL The operation panel can be selected according to the process. IP-100 The operation panel has been provided with a large userfriendly LCD. pictograph and set values are shown on the same screen, which promises improved operability of the panel. The operation panel has been provided with a variety of communication and maintenance control features and is able to store data on a martmedia or personal computer. The features of the operation panel can be updated without the need for changing the PW/ROM. CP-160 Pattern sewing can be performed by the number of stitch control feature. Four different kinds of pattern sewing are possible: automatic reverse stitching, constant-dimension sewing, rectangleshape sewing, and multi-layer stitching. The maximum number of stitches that can be set for automatic reverse stitching (single or double) is CP-160 IP-100, IP-100C CP-160, CP-160D C-910, C-380, EC-10 (eptember, 2003) 1/5

173 PC OX/CONTROL PNEL/MOTOR FOR C Model name PC box Motor for C Operation panel C910 DDL-9000 DLN-9010 Control box Provided with a built-in I/O board Operation panel IP-100 CP-160D IP100 CP160D Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-8). DDL-5550N-7 DDL DLN-5410N-7 DLU-5490N-7 DLD-5430N-7 DLM-5400N-7 DMN-5420N-7 C910 Control box Provided with a built-in I/O board Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-4). M91 Pulley belt Operation panel IP-100C IP100C C910 CP-160 CP160 DDL-5600N-7 DLN-5410NJ-7 Control box Provided with a built-in I/O board Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-5). LZ-2282N-7 LZ-2284N-7 LZ-2284NU-7 LZ-2284C-7 LH-31-7 Except LH , LH C910 Control box Operation panel IP-100 CP-160 IP100 CP160 PC box For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. OPTION Part No. Description Feature I/O board To retrofit the E-4, E-5 or E-8 to your existing machine, an I/O board which is separately available, is required. Remaining bobbin thread detector Model Part No. pplication E-4 GE DDL-5550N-7, DDL , DLN-5410N-7, DLU-5490N-7, DLD-5430N-7, DLM-5400N-7, DMN-5420N-7 E-5 GE DDL-5600N-7, DLN-5410NJ-7 E-8 GE DDL-9000, DLN-9010 C-910, C-380, EC-10 (eptember, 2003) 2/5 E-4

174 C ERVOMOTOR/CONTROLLER C-380 The C-380 is provided with many different standard functions, including speed-control, soft-start, automatic reverse stitching with the specified number of stitches, constantdimension stitching, and overlapped (multi-layered) stitching. These functions ensure sewing performance optimally suited to the material and process. With its higher torque under low-speed sewing, the C-380 enables the machine to smoothly start sewing operation. The unit is also provided with additional capabilities to enhance the sewing of extra-heavy-weight materials by increasing the clothpenetrating force of the needle for the first stitch, reversing the rotation direction of the motor to bring the needle to its upper end position after thread trimming, etc. With these capabilities, the sewing machine is able to demonstrate optimal sewing performance both widely and smoothly when working with heavy-weight materials. C-380 OPERTION PNEL (OPTION) The XC-E500 is provided with program sewing and a host of other functions that contribute to increased efficiency. The XC-E500 can be installed on the top of the sewing machine. ll functions provided by the XC-E500 can only be specified through the operation panel. Data programmed in the operation panel can be transferred to another sewing machine unit. XC-E500 PC OX/OPERTION PNEL/MOTOR FOR C Machine for leather and heavy weight materials C380 Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C 14 MO-6000 series MF-7000, MFC-7000 C C pplicable models MF-7000 Pulley: 85, elt: 33 inches Top mount type Pulley: 85, elt: 33 inches MFC-7000 emi-sunken type Pulley: 85, elt: 33 inches Motor for C M F1 F2 F3 PC box Operation panel Motor For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided For General Export ingle-phase V 3-phase ingle-phase V For JU (L) 3-phase V For CE ingle-phase V JU: North merica and Central and outh merica C-910, C-380, EC-10 (eptember, 2003) 3/5

175 ELECTRONIC-TOP MOTOR/ CONTROL OX EC-10 The EC-10 enables the sewing machine to perform thread trimming, stop with its needle up/down, perform automatic reverse feed stitching at sewing start and sewing end, and perform one-touch reverse feed stitching with a switch. Needless to say, the number of reverse feed stitches can be specified. contactless electromagnetic coupling is adopted. This means that the clutch disc does not require any maintenance. Furthermore, cooling efficiency is enhanced, there by preventing the motor from running at very hot temperatures. In addition to the EC-10's error-identification and signal input/output checking modes, the machine features a new resistor pack system for identification of sewing machine used for improved maintainability. OPERTION PNEL PECIFICTION No. Function EC utomatic thread trimmer utomatic back tack function Wiper oft-start uto-lifter upport for sewing machine for standing use top with needle up/down EC-10/CP-160 (optional) 8 Normal stop with needle up 9 Normal stop with needle down 10 utomatic back tack stitching at sewing start 11 utomatic stitching at sewing end 12 ack tack pattern switch (015 stitches) (019 stitches) EC Max speed limitation variable resistor OPERTION PNEL CP-160 (OPTION) 14 Thread trimming prohibition switch long with its standard functions, the operation panel offers users a bobbin thread counter for higher efficiency and pattern sewing. Functions such as multilayer stitching, constant-dimension sewing, and rectangle stitching. The easy-to-read operation panel facilitates function selection and easy input of sewing data such as the number of stitches Needle up/down compensating switch Double back tack switch for start Double back tack switch for end Overlapped stitching pattern switch 1-needle, lockstitch machine: CP-160 LH-3100 series, LZ-2280N series: CP Constant-dimension stitching pattern Programmable seam length 21 obbin thread counter 22 Material edge sensor CP-160, CP-160 The optional ED-2 material edge sensor can be attached to the operation panel. (for 1-needle, lockstitch machine) pecified inside the control box. Operative when the machine is equipped with auto-lifter (K83: optional). Pedal unit (PK-70, or 71: optionally available) for standing work can be attached to the sewing machine. Operative when the machine is equipped with a material edge sensor (ED-2:optional). (for 1-needle, lock stitch machine) C-910, C-380, EC-10 (eptember, 2003) 4/5

176 PC OX/OPERTION PNEL/MOTOR FOR EC-10 EC10 Power supply Operation panel For General Export 220V PFL F Not provided For North merica 110V 220V PFL PFL H K Provided 1-needle, lockstitch machine LH-3100, LZ-2280N series For CE 230V PFL N Motor for EC-10 1-needle, lockstitch machine M Power supply Frequency Pulley belt Motor mounting base inglephase 3-phase 110V 220V 230V 240V 220V 240V 380V 400V 415V D G E K P L T M 50Hz 60Hz 5 6 Motor pulley O.D. (mm) Pulley belt length (Inch) 40" 41" F H J K L M N P For Europe For CE E C " Q 115 R " T If an auto-lifter is installed on the machine, the presser foot will be lifted/lowered by the the foot pedal. 14 LH-3100, LZ-2280N series M Power supply Frequency Motor pulley Pulley belt Motor mounting base inglephase 3-phase 110V 220V 230V 240V 220V 240V 380V 400V 415V D G E K P L T M 50Hz 60Hz 5 6 Motor pulley O.D. (mm) F G H J K L M N Pulley belt length (Inch) 41" 42" 43" 44" For Europe For CE E C 105 P 110 Q C-910, C-380, EC-10 (eptember, 2003) 5/5

177 Cloth Puller V050 ERIE The cloth puller effectively prevents sewing trouble, including irregular stitches, puckering and stitch gathering. In addition, it controls the straight stitching capability of the sewing machine. The feed amount can be easily regulated by the simple operation of a dial. The dial has a clearly legible scale, allowing the operator to perform adjustment without having to stand up. ecause of its higher drawing force, the cloth puller can smoothly feed overlapped portions of a material. It is also smoothly adaptable to curved and leaned portions, thereby allowing the operator to handle the material without difficulty. The cloth puller features an auto-lifter that interlocks with a knee-lifter lever and reverse-stitching lever to raise the roller when performing reverse stitching. It can also be used with the sewing machine with a wiper. DDL-5550N-7/V052 PECIFICTION Feed method Feed mechanism Feed amount of roller Lockstitch machine... Intermittent feed that is almost same as the continuous feed Chainstitch machine... Intermittent feed One-way system interlocked with the feed mechanism of the sewing machine 06 mm Proximity type Large roller type Top and bottom roller type Lift of the roller Manual 10mm 14mm 12mm uto 4mm 12mm 5.5mm Weight Power supply pprox. 13kg ingle-/3-phase The feeding length of puller varies a little with sewing speed. M-1190/V054 Proximity type Large roller type Top and bottom rollers type The roller is placed near the needle. This means that the material can be easily handled in the case of sharp curve stitching and short-distance stitching. To avoid interference with the presser foot in the case of reverse feed stitching, etc., the roller comes with an automatic doublestepped stroke lifter that lifts the roller to certain height for turn-out, and then lifts it again to the highest position of its stroke. Large feeding mechanism properly feeds the material straight. It is best-suited to medium-weight materials. For heavy-weight materials and long materials, it is effective to use a roller liner that securely holds the material in combination with the V050 series. (the roller liner is supplied as standard with the large roller as an accessory. ) This type of puller securely pulls the material while placing it between the top and bottom rollers. This means that the puller achieves high-quality seams free from puckering even when using newlydeveloped materials. trong pulling force ensures an upgraded efficiency for the sewing of large materials and long materials. 14 V051 V052 V053 V050 ERIE (eptember, 2003) 1/4

178 FOR 1-NEEDLE, LOCKTITCH MCHINE Proximity type Proximity type (provided with auto-lifter) Type Model pplicable model Feature Cloth puller with a large roller Cloth puller with a large roller (provided with an auto-lifter) Cloth puller with top and bottom rollers V051 V051 V051C V051D V052 V052 V056 WHEN YOU PLCE ORDER DDL, DLD DLN DDL, DLD DLN DDL, DLD DLN, DLU DDL, DLD DLN, DLU The roller is spaced only 28mm from the needle. This makes the roller highly adaptable to the sewing of sharp curves and extermely short lengths of material. To avoid interference with the presser foot during processes such as reverse stitching, the roller comes with automatic double-stepped stroke lifter that lifts the roller to certain height for turnout, and then lifts it again to the highest position of its stroke. The cloth puller can be widely used for many different types of materials, from light-weight materials for ladies' dresses, blouses and men's shirts, to medium-weight materials for blazers and coats. This type of cloth puller is best-suited for sewing medium-weight materials, a process which requires a large feeding amount and wellcontrolled straight stitching capability. This puller helps reduce operator fatigue and enables even low-skilled operators to successfully perform sewing operation. The puller securelly pulls the material while placing it between the top and bottom rollers. This means not only the material can be fed in the correct direction but also material slippage can be avoided. With its strong pulling force, V056 helps enhance efficiency in the sewing of large materials and long materials such as curtains and making pin tucks. The cloth puller must be used with an exclusive table. For the machine equipped with auto-lifter, it is necessary to install the K device attaching plate asm. (part No.: MV ) and junction cable (part No.: MV ). Except DDL-9000 V051 V052 V056 pplicable model pplicable model pplicable model Voltage DDL, DLD models DDL, DLD models DDL, DLD, DLN, DLU models 100V240V DLN model DDL, DLD/ provided with auto-lifter C DDL, DLD, DLN, DLU/ provided with auto-lifter 380V440V DLN/provided with auto-lifter D Except DDL-9000 FOR LH ERIE (2-NEEDLE, LOCKTITCH MCHINE) Type Model pplicable model Feature Cloth puller with a large roller Cloth puller with a large roller (for provided with a back tuking solenoid type) Cloth puller with top and bottom rollers Cloth puller with top and bottom rollers (for provided with a back tuking solenoid type) WHEN YOU PLCE ORDER V053 V053 V053C V053 V053D LH series This type of cloth puller is best-suited for sewing medium-weight materials, a process which requires a large feeding amount and wellcontrolled straight stitching capability. This puller helps reduce operator fatigue and enables even low-skilled operators to successfully perform sewing operation. This type of cloth puller draws the material between top and bottom rollers, thus preventing the material from being fed in the wrong direction and resultant irregular stitching. The cloth puller is especially effective when sewing newly-developed materials or men's shirts with shape-keeping treatment. In addition, the cloth puller can be widely used for knit fabrics or top center plaits, pockets and bottoms of pajamas. The cloth puller must be used with an exclusive table. If the V053 or V053D complete is delivered, an exclusive table is necessary. For the puller provided with a back tucking solenoid a back tucking solenoid shiftingdevice asm. (part No.: MV ) and junction cable (part No.: MV ) is required. pplicable model Voltage LH series (with a large roller) 100V240V LH-3100 series (with top and bottom roller) 380V440V LH series (with a large roller/for solenoid shifting type) C LH-3100 series (with top and bottom roller/for solenoid shifting type) D V050 ERIE (eptember, 2003) 2/4

179 FOR M ERIE (2-NEEDLE, FEED-OFF-THE-RM, DOULE-CHINTITCH MCHINE) Type Model pplicable model Feature Cloth puller with a large roller V054 M-1190 M-2260 This type of cloth puller is suited for joining the sides of skirts and seaming sleeve and side of shirts or blouses. The device employ an intermittent feed method, which is almost same as the continuous feed method. This enables the cloth puller to adapt to continuous operation of the sewing machine, thus leading to higher efficiency. FOR MH ERIE (DOULE-CHINTITCH MCHINE) Proximity type Type Model pplicable model Feature Cloth puller with a large roller V055 V055 MH MH-481, -5 MH-484, -5 MH MH-481, -5 MH-484, -5 The roller is placed near the needle. It is spaced 30 to 34mm away from the needle. V055 adapts well to sharp curve sewing and short-distance sewing that require sharp angle handling of the material. In addition, the puller is provided with an intermittent feed mechanism. This enables the puller to adapt to continuous operation of the sewing machine, thereby achieving a higher degree of efficiency. The puller is widely applicable to various processes including yoke attaching to dress shrits and various materials ranging from light-weight ladies' dresses, blouses and shirts to medium-weight blouson and pajamas. V055 is best-suited to the sewing of medium-weight materials which require large feed amount and accurate straight feeding ability. V055 helps reduce the operator's fatigue and allows unskilled operators to operate the sewing machine. The puller comes with an intermittent feed mechanism. This allows the puller to adapt to continuous operation of sewing machine, thereby achieving a higher of efficiency. FOR MO ERIE (OVERLOCK/FETY TITCH MCHINE) Cloth puller with top and bottom rollers Type Model pplicable model Feature V058 MO series This type of puller securely pulls the material while placing it between the upper and lower rollers. This means that the material will never be fed in a wrong direction and the material slippage will not arise. The tape puller provides a strong pulling force, which is best-suited to the sewing of heavy materials and long materials such as mats and curtains. V058 (TOP ND UTTOM ROLLER TYPE) Provided as standard Options Roller ize (mm) Roller material: Polyurethane Roller material: teel Roller surface: Plane Roller surface: Tooth Diameter Width Part No. Part No MUP5515K MU5515K Top roller MUP5535K MU5535K MUP5550K MU5550K uttom roller MUP2580K MU2580K MUP2560K MU2560K 14 WHEN YOU PLCE ORDER V054 V055 V058 pplicable model pplicable model pplicable model Voltage M series (with a large roller) Proximity type for MH Top and bottom roller type for MO 100V240V Large roller for MH 380V440V V050 ERIE (eptember, 2003) 3/4

180 V050 RIE/MODEL OF EWING MCHINE CORREPONDENCE TLE For 1-needle, lockstitch machine Model Name V051 Proximity type With a side plate and an K V051 device type V051C V051D Large roller type V052 V052 Top and bottom roller type V056 DDL-5530N DDL-5550N, DDL-5600N, DLD-5430N, DLU-5490N, DLN-5410N, Model Name Large roller type V053 LH-1150 series LH-3100 series M-1190 MH MH-481, -5 MH-484, -5 MO series Numeric values: Center-to-center distance between the needle entry to the roller (unit: mm) V050 series can be installed on the models given in the table above whether or not the machine is provided with a thread trimmer/wiper. For any model marked with a triangle () in the above table, V050 series will be to order. REPLCELE ROLLER Top and bottom roller type V053 For LH series With a back tacing solenoid type Large roller type V053C Top and bottom roller type V053D For M series For MH series For MO series Large roller type V054 Proximity type V055 Large roller type V055 Top and bottom roller type V058 Roller Model name Provided as standard Options ize (mm) Roller material: Polyurethane Roller material: teel Roller surface: Plane Roller surface: 60 tooth Diameter Width Part No. hape Part No. hape V051,, C, D MU0P2510 V MU0P2515 Top roller V052, V054 V053, C V056 V053, D V MU0P5515 MU MU0P5535 MU MU0P5550 MU05550 V053, D MU0P2580 uttom roller V MU0P3022 V MU0P5550 Top and buttom roller type (Note) roller for V052, V052, V053 and V055 is 55mm in diameter and 15mm in width. In addition, other two different kinds of rollers are available as renewal parts, one is 50mm in width and the other is 35mm in width. elect an appropriate roller in accordance with sewing materials to be used and applications of the machine when placing your order for V050 device or separately place an order for a renewal roller. V050 ERIE (eptember, 2003) 4/4

181 Programming oftware for Computer-controlled ewing Machines PGM-20 The PGM-20 programming software for computer-controlled sewing machines is especially designed for creating pattern data for JUKI's Mseries computer-controlled cycle machines, JUKI's VP-series sewing machines, JUKI's LK-1900 series computer-controlled, high-speed bartacking machines, JUKI's MOL-254 automatic belt-loop attaching machine, JUKI's M-1800 series computer-controlled, chain stitsh button sewing machines. The PGM-20 software is provided with a wide assortment of input functions to allow the operator to easily create pattern data with the mouse and/or digitizer in an interactive manner while visually checking the screen displays. In addition, the PGM-20 software is able to edit pattern data created by conventional programming devices (PGM-10, PGM-5/6). The PGM-20 is intended for use in IM PC/T-compatible personal computers. ince the software is supported by Windows 95/98, the ability to use it on both desktop and notebook type computers to upgrades general versatility. Commercially available ROM writers and digitizers can also be used with the PGM-20 software. (Refer to the "Operating environment for peripheral devices.") Models which can run PGM-20 software. M series ( type, C type, D type and large pattern seamer) VP series (-870 and -875), LK-1900 series, MOL-254, M-1800 series. MENU OF FUNCTION TO CRETE ND EDIT DT Personal computer Mouse ROM writer Digitizer ystem configuration VP-875 Data-creating functions Entry of configurations: addition, movement, deletion, division and offset of lines, arcs, circles, polygons, splines, dotted lines, and configuration points. Entry of sewing attributes: point stitching, normal stitching, zigzag stitching, satin stitching, basting stitching, reverse sewing, jump and multi-sewing. OPERTING ENVIRONMENT FOR PERONL COMPUTER Data-editing and data-modification functions Edit: cut, paste, copy, enlargement/reduction/rotation/parallel move, and mirror inversion. Edit of needle entries: addition/movement/deletion of needle entry points, joining of point sewing data, and change of point sewing speed. Changes of sewing data: changes of sewing order, sewing attributes, stitching pitch (stitch length), sewing speed, and jump speed. 14 Item Personal computer supporting PGM-20 software Operating system in service IM PC/T compatible personal computer pecifications Pentium 120 MHz or higher is recommended ( i486dx 33MHz or higher required) CPU built-in numerical data processor has to be provided. Memory 16M or more Hard disk t least 50M available memory. Floppy disk One or more 3.5"1 (2DD 720K/2HD 1.44M) floppy drives must be installed. CRT that provides a display image of "1,024768" dots in 256 different colors is recommended CRT resolution (minimum requirement "640480" dots in 16 different colors). Mouse Mouse required M-Windows 95/98 (English) OPERTING ENVIRONMENT FOR PERIPHERL DEVICE Digitizer ROM writer Item Programming format Data transmission mode Resolution pecifications To be used with R-232C interface (any port from COM1 to COM4) Programming format prepared by GRPHTECH Co., Ltd. Conforming to [inary-1 inary-2] tream mode (20 pieces of data in one second) digitizer with a resolution of 0.1mm is required. Data input/output data for the M-205/-206 or LK-1900 is required. For remote-control operation of the ROM writer, a PKW-1100 NME OF MCHINE TYPE (VL DT Co.) has to be connected to the R-232C interface (any port from COM1 to COM4 ). If any ROM writer other than PKW-1100 is used, input/output HEX file. For a detailed explanation of communication-related matters, please contact us. PGM-20 (eptember, 2003) 1/1

182 Programming software for computer-controlled sewing machines PM-1 This software is to input and edit sewing data of JUKI's latest sewing machines. Its versatile input functions allow to input sewing data of each electronic sewing machine model easily, accurately, and quickly. It supports high quality production with high added value by utilizing and creating original data for specific designs and applications. Models suited for PM-1 M series ( type, C type, and D type), LK-1900 series, LK-1900 series, LK-1910, LK-1920, LK-1930 series, LZ-2290 (-7), LH-1790, M-1800, VP-875 Create sewing data in an interactive manner during viewing screen displays. Image (MP file) copied by a scanner can be traced by a mouse to input data. Equipped with template functions that allow to create sewing data easily by input each parameter (For LH-1790). Coordinates entered can be corrected and re-edited by keyboard input. 14 Equipped with a data preview function that displays data configuration before reading sewing data. ewing sequences can be checked easily by a function of coloring needle drop points. PM-1 (eptember, 2003) 1/2

183 Operating environment for Personal Computer Item pecifications Type of PC IM PC/T compatible personal computer CPU PentiumII300MHz or higher is recommended y connecting with a personal computer line, sewing machine equipped with the latest operation panel IP series can perform sew-off and data can be checked and edited on the spot. Memory Hard disk CRT resolution Mouse/Keyboard 32M or higher is recommended (Do not overload O) t least 100M is required. Locate under "C:" as a device name Recommend 1024 x 768 dots in at least 256 different colors Equipped with a mouse and a keyboard IP-100 Operating ystem English version PM-1 Einglish version Windows 98 or Windows 2000 Other To be used with digitizer, ROM writer, or PC connection, R-232 C channel is required respectively To be used with mart Media, an adaptor is required. Locate under any device name from ":" to "Z:" To be used with a floppy disk, at least 1 drive of needed 3.5 inch 2DD (720K bites) / 2HD(1.44M bite) is required. Locate under any device name from ":" to "Z:" ROM Writer is required to input/output ROM on LK-1900 series ystem Formation IP-100 ROM Writer mart Media card Connected to a personal computer IP-200 Digitizer IP-200 canner Mouse mart Media IM PC/T compatible personal computer IP-100 For LZ-2290 Operation panel IP-200 For LH-1790, LK-1900 Operation panel Floppy disk Through a PC on-line connection, sew-off can be performed and entering and correcting data is possible on the spot. mart Media card ROM Writer Digitizer mart Media Reader/Writer Floppy disk Driver canner Required to enter pattern data in ROM for LK1900 series and M-205/206. Use to input from the original print. Required to enter pattern data into mart Media of LZ-2290, LH-1790, and LK Required to input data into disks of M series and VP, excluding M-205 and 206. ble to trace images from the original and input data (Use MP file). Connected to a personal computer It cannot be connected with standard panels of LH-1790 and LK Digitizer The following is specifications of digitizer for PM-1. Item pecifications Digitizer Connect with R-232C (any port from COM1 to COM) to input digitizer. Input data format Format prepared by Graphtech Co., Ltd., conforming to the digitizer input format inary-1 and inary-2. ROM Writer ROM writer is required to read and write ROM data with PM-1. To be used with PM-1 data file input/output functions pecifications ROM Writer has to be able to read and write ROM of sewing machines as well as to input /output Intel HEX file through PC connection. Mode Resolution aud rate Use tream Mode, 20 pps 0.1mm 9600bps PM-1 (eptember, 2003) 2/2

184 1-needle, Lockstitch Machine with Double-capacity Hook DDL-5600N DDL-5600N-7 (with automatic thread trimmer) The machine is equipped with a link mechanism which is highly evaluated for its straightness, consistency and durability. Thanks to this mechanism, the machine is capable of making welltensed, beautifully finished seams, regardless of the type of heavy materials. The maximum stitch length is as long as 8mm (with the L-type machine for the sewing heavy materials with long stitch length), thereby making the machine widely applicable to the sewing of heavy materials, such as bags, requiring a longer stitch length. Changing the bobbin is troublesome, especially when using a thick thread. This machine, however, is equipped with a doublecapacity hook, thereby reducing the frequency of changing the bobbin. Thanks to this feature, greater efficiency is assured. DDL-5600N-7-0/CP-160 PECIFICTION Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Thread Hook Lubrication Lubricating oil DDL-5600NJ For jeans 4,000rpm 5mm (normal/reverse feed) DDL-5600NL For heavy materials 3,000rpm 8mm (normal/reverse feed) 36mm y hand: 5.5mm, y knee: 13mm D1 (#21) #20#23 For JE: 134 (Nm130) #30#8, 4692, Nm=60/330/3 Horizontal-axis double-capacity hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) DDL-5600NR For leather shoes Model name pplication Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Needle (at the time of delivery) Thread Hook Lubrication Lubricating oil utomatic reverse feed function Power requirement Power consumption Total weight DDL-5600NJ-7 For jeans 4,000rpm 5mm (normal/reverse feed) DDL-5600NL-7 For heavy materials 36mm y hand: 5.5mm, y knee: 13mm D1 (#21) #20#23 For JE: 134 (Nm130) #30#8, 4692, Nm=60/330/3 Horizontal-axis double-capacity hook utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) Provided as standard 3,000rpm 8mm, 5mm (reverse feed) ingle-phase V, V, 3-phase V 650V 81kg DDL-5600NR-7 For leather shoes 15 DDL-5600, 5600N-7 (eptember, 2003) 1/2

185 WHEN YOU PLCE ORDER DDL5600N DDL5600N 7 pplication Wiper and automatic reverse feed function uto-lifter (optional) For jeans For heavy materials For leather shoes (with roller presser foot) J L R Wiper Not provided Provided (for DDL-5600NJ-7) utomatic reverse feed function Provided Provided 0 F Not provided Provided (K85) K PC box C910 Motor for C M91 PC box Control box Pulley belt For JU(L) ingle-phase V PFL For JU, General Export 3-phase V PFL D Provided with a built-in I/O board For General Export ingle-phase V PFL K For CE ingle-phase V PFL N JU: North merica and Central and outh merica. Control box provided with a built in I/O board ( ) should be selected for the machine head equipped with the remaining bobbin thread detector (E-5). Operation panel Operation panel IP-100C CP-160 IP100C CP160 OPTION Model K85 E-5 ED-2 Part No. GE Description uto-lifter Remaining bobbin thread detector Material edge sensor Micro-lifter (asm.) Feature When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread. When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. This device can be installed on the back of the faceplate. It is very convenient for frequent use. To retrofit the E-5 to your existing machine, I/O board (part number: ), which is separately available, is required. Remaining bobbin thread detector (E-5) Material edge sensor (ED-2) DDL-5600, 5600N-7 (eptember, 2003) 2/2

186 1-needle, Lockstitch Machine for Leather and Heavy Materials DDL-8700L This is a newly designed JUKI's unique lockstitch machine. The machine is able to sew at a pitch as long as 7mm for both normal and reverse feed directions. With the adoption of a feed mechanism and thread take-up lever, the machine achieves increased efficiency of feed and well-tensed stitches. It is a basic lockstitch machine suited for the sewing of leather or heavy sewing products such as bags, pouches and purses. The machine head was remodeled to achieve an optimumly balanced and highly rigid machine head frame. With its reduced vibration and noise and easy operation of the feed lever at the time of reverse stitching, the machine promises to make sewing work more comfortable. The wider distance from the machine arm to the needle on the front of the machine head, smoothened design of the machine head, larger needle bar stroke (35mm), and higher lift of the presser foot (13mm) enable easy handling of heavy material. In addition, the machine is equipped with a handwheel that is larger than normal for easy turning. y adopting the locus best suited to the sewing of leather and heavy materials, the machine smoothly feeds heavy materials without stitch gathering even on multi-layered portions. The machine also uses a Teflon presser foot that offers sharp-curve sewing capability to prevent from scratch on the material. DDL-8700L PECIFICTION WHEN YOU PLCE ORDER Model name Max. sewing speed DDL-8700L 4,000rpm (for stitch length less than 5mm) 3,500rpm (for stitch length up to 7mm) DDL-8700L Max. stitch length 7mm (normal/reverse feed) Needle bar stroke Lift of the presser foot Needle (at the time of delivery) 35mm y hand: 5.5mm, y knee: 13mm D1 (#21) #16#23 or DP5 pplication For leather and heavy materials L Presser foot Teflon presser foot Feed dog Hook Lubrication 3-row utomatic-lubricating full-rotary hook utomatic 15 Lubricating oil JUKI Machine Oil No.7 (equivalent to IO VG7) Weight of the machine head 28kg DDL-8700L (eptember, 2003) 1/1

187 1-needle, Top & ottom-feed, Lockstitch Machine DU-140 DU-141NH (with double-capacity hook) DU-141H-7 (with double-capacity hook and automatic thread trimmer ) With its unique thread take-up mechanism, feed mechanism, and hook, the machine feeds difficult-to-feed materials and multilayered portions of material with great precision, thereby producing beautifully finished seams of consistent quality. The stitch length is adjusted in the range of 0 to 9mm both in the normal and reverse directions by operating the stitch dial. This feature allows the machine to be used in wider applications such as decorative stitching, which requires a larger pitch and sewing of tent sheets. The reversefeed sewing length is also adjustable. DU-141H-7 The knife is driven by a thread trimming cam ideal for cutting thick threads at a sharp angle. DU-141H-7-0/XC-E500 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head utomatic reverse feed function Power requirement DU-140 DU-141NH DU-141H-7 2,000rpm 9mm (normal/reverse feed) 35mm 37mm y hand: 7mm, y knee: 15mm y hand: 6mm, y knee: 15mm Link type 25mm Horizontal-axis full-rotary hook Horizontal-axis full-rotary double-capacity hook D1 (DP17) (#21) #14#23 D1 (DP17) (#21) #14#23, For JE: 1738 (Nm130) #40#8, 3392, Nm=90/330/3 y an oiler (hook: automatic) JUKI New Defrix Oil No.1 (equivalent to IO VG7) 265mm 32kg 477mm178mm 270mm 34kg Provided as standard ingle-phase V, V 3-phase V, V WHEN YOU PLCE ORDER Without automatic thread trimmer DU140 DU141NH With automatic thread trimmer DU141H70/ 15 utomatic reverse feed function provided 0 Pneumatic auto-lifter (optional) Knee switch type (K114C) Pedal switch type (K114) Not provided C PC box/operation panel for C C380 Motor for C M PC box For General Export ingle-phase 3-phase V V ingle-phase V 37 For JU (L) 3-phase V 38 For CE ingle-phase V 34 JU: North merica and Central and outh merica. Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C For General Export For JU (L) For CE Motor ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V DU-140, 141NH, 141H-7 (eptember, 2003) 1/2

188 EXCHNGELE GUGE PRT For DU-140, DU-141NH, DU-141H-7, DU-580 Description Throat plate Feed dog Notes D E00 (D=2.6) D E0 (D=4.2) D E0 (D=3.0) D 31.3 D E00 titch length: max. 8mm H0 (D=3.5) H0 (D=2.6) titch length: max. 8mm 38.4 D titch length: max. 10mm (D=2.0) H00 (D=2.6) H00 titch length: max. 9mm 40 D 31 ingle-lined feed dog for sewing gloves and shoes Exclusive parts Roller presser foot asm for DDL: R0 Narrow type walking foot for DU: H H0T For DU-140, DU-141NH, DU-141H-7 Description Walking foot Presser foot Notes H H0 For piping H H0 Piping size : 3.2mm (1/8") F : 6.4mm (1/4") C : 4.0mm (5/32") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") E : 5.6mm (7/32") Cut-out tail for piping H0 Double groove H HW Piping size : 3.2mm (1/8") F : 6.4mm (1/4") C : 4.0mm (5/32") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") E : 5.6mm (7/32") Left-hand H0Q HU Right-hand H0R H Narrow type for sewing gloves and shoes H0T H titch length: max. 6mm Exclusive parts Feed dog: Throat plate: For attaching zippers H0X H0X Without hardening (blank) DU-140, 141NH, 141H-7 (eptember, 2003) 2/2

189 1-needle, Unison-feed, Lockstitch Machine with Large Hook DNU-1541 DNU-1541 (with safety mechanism) DNU (with automatic thread trimmer) With its larger needlebar stroke, higher presser foot lift, and newly adopted double-tension mechanism, the machine offers excellent sewing capabilities and responsiveness. The alternating vertical movements of the walking foot and presser foot are as large as 6.5mm. In addition, the ratio between alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes. Thanks to this feature and the adoption of a new method of rectangular feed that prevents needle from fraying, the machine sews multi-layered parts of a material with consistent stitching pitch while preventing stitch gathering. The stitch length can be easily selected by the stitch dial. The machine's enhanced operability features include a clear view of the area around the needle, placement of the bobbin thread winder on the front face of the machine arm, and a large handwheel (ø160mm). DNU /XC-E500 DNU-1541 When the thread is caught in the hook or any other sewing trouble occurs, the safety mechanism will automatically operate to prevent the machine from being damaged. DNU The vertical stroke of the presser foot and walking foot (amount of alternating vertical movement) can be easily changed with the large dial mounted on the top of the machine head. The sewing speed is automatically regulated based on the vertical stroke setting. This ensures ideal sewing conditions at all times. WHEN YOU PLCE ORDER Without automatic thread trimmer DNU1541 With automatic thread trimmer DNU Motor for C M afety mechanism Pneumatic auto-lifter Motor Not provided Provided Knee switch type (K123) Pedal switch type (K123) Not provided For General Export For JU (L) ingle-phase 3-phase ingle-phase 3-phase V V V DL device For CE ingle-phase V 63 Not provided Provided elect the auto-lifter code (K123). PC box/operation panel for C C380 PC box Operation panel For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C JU: North merica and Central and outh merica. DNU-1541, DNU-1541, DNU (eptember, 2003) 1/3

190 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up mount of alternating vertical movement Dial for adjustment of alternating vertical movement ottom-feed adjusting mechanism Hook Needle (at the time of delivery) Thread Pitch changing method obbin winder Knee-lifter mechanism afety mechanism Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head utomatic reverse feed function Compressed air and air consumption Power requirement DNU-1541 DNU-1541 DNU ,500rpm 3,000rpm 9mm (Normal/Reverse feed) 36mm y hand: 9mm, y knee: 16mm lide type mm 16.5mm Provided as standard Provided as standard Horizontal-axis full-rotary double-capacity hook ( Nm160) Nm125Nm180 #30#5, 46138, Nm=60/315/3 y dial Provided as standard Provided as standard Provided as standard Centralized oil wick lubrication (hook: automatic) JUKI New Defrix Oil No.2 (equivalent to IO VG32) 264mm 477mm x 178mm 36.5kg 42.5kg Option Provided as standard 0.5MPa (5kgf/cm 2 ), 0.3N /min ingle-phase V, V 3-phase V, V Compressed air is indispensable EWING PEED TLE The maximum sewing speed has been specified in accordance with sewing conditions as shown in table below. et the maximum sewing speed appropriately in accordance with the sewing conditions given taking care not to exceed the corresponding specified value. DNU-1541, DNU-1541 DNU mount of alternate vertical movement of the walking foot and presser foot titch length: 6mm or less titch length: More than 6mm and 9mm or less mount of alternate vertical movement of the walking foot and presser foot titch length: 6mm or less titch length: More than 6mm and 9mmor less Less than 3mm 2,500rpm 2,000rpm Less than 2.5mm 3,000rpm 2,000rpm 3mm to less than 4mm 2,000rpm 2,000rpm 2.5mm to less than 4mm 2,400rpm 2,000rpm 4mm to less than 6.5mm 1,600rpm 1,600rpm 4mm to less than 4.75mm 2,000rpm 2,000rpm 4.75mm to less than 6.5mm 1,800rpm 1,800rpm DNU-1541 DNU DNU-1541, DNU-1541, DNU (eptember, 2003) 2/3

191 OPTION Pneumatic auto-lifter witch type Model Type Part No. name Knee Pedal switch type switch type K119 GK DNU-1541 K119 GK DNU-1541 K120 GK K120 GK DNU K123 GK K123 GK utomatic reverse feed function ir regulator Not provided Provided Model name DNU-1541 DNU-1541 Part No Remarks Provided with air regulator To use a pneumatic auto-lifter and reverse feed function in combination with a machine that is without automatic thread trimmer, select K119 or K119. Combination of optional devices Model name DNU-1541 DNU-1541 DNU Combination utomatic reverse feed function Pneumatic auto-lifter Pneumatic auto-lifter+ utomatic reverse feed function Pneumatic auto-lifter+ utomatic reverse feed function Pneumatic auto-lifter+ utomatic reverse feed function+ DL device Pneumatic auto-lifter K120 K120 K119 K119 K123 K123 K123 utomatic reverse feed function Provided as standard DL device DL21(D kit) Model Part No. Description Feature GDL-21000D0 DL device [DL21 (D kit)] for installed after the setup of the machine pplicable model: DNU For sewing processes that handle heavy materials or multi-layered parts of material, the alternating vertical movements of the walking foot and presser foot can be quickly set to maximum by pressing the DL switch. The result is beautiful seams free from gathered stitches. The machine is provided with both a hand switch and knee switch. The DL device cannot be used alone. It is designed for use in combination with the auto-lifter (K123). MH Ruler H P2 WP D2 crew Washer uspended ruler W KN2 pring washer PK75 GPK pedal unit pplicable model: DNU Highly operable 3-pedal unit for standing work. 15 DL device PK75 DNU-1541, DNU-1541, DNU (eptember, 2003) 3/3

192 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook [Gauge for standard] LU-1508N LU-1508NH (for extra heavy materials) LU-1510N (with automatic lubricating mechanism) (with automatic lubricating mechanism and automatic thread trimmer) LU-1510N-7 [Gauge for LU-2200] LU-1509N LU-1509NH (for extra heavy materials) LU-1511N-7 (with automatic lubricating mechanism and automatic thread trimmer) The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without stitch gathering. The lower orbit of the feed dog prevents the material from flopping and reduces operating noise and vibration. Rectangular feedlu-1508n, LU-1510N, LU-1510N-7, LU-1509N, LU-1511N-7 Compared with the elliptical feed, the rectangular feed helps reduces gathered stitches. Complete rectangular feedlu-1508nh, LU-1509NH The locus of the "needle" and "feed" motions are nearly rectangular. This prevents stitch gathering and provides efficient feed on multi-layered portions of material. With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unisonfeed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. Even when a heavy material is used, the presser foot lift does not decrease. This means that the presser foot comes into contact with the material at exactly the same time that it does when sewing lighter-weight sections of the material. s a result, the walking foot retains the material with a consistent pressure to prevent irregular stitches. LU-1508NH, LU-1509NH The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. LU-1510N-7-0/XC-E500 With its sufficient needle bar stroke of 38mm and long 190R needle, the machine supports the sewing of extra heavy materials. The machine comes with an extra large steel handwheel with a diameter as large as 175. LU-1510N, LU-1510N-7, LU-1511N-7 The machine is equipped with a bottom-feed adjusting mechanism that adjusts the amount of bottom-feed while keeping the needle-feed fixed. With the mechanism, the machine can prevent uneven material feed without changing stitch pitches. utomatic lubricating mechanism improves maintainability. The machine is provided with a sub oil pan and double filter to keep dust from entering the oil. LU-1510N-7, LU-1511N-7 The machine comes with JUKI's proven thread trimming mechanism. With its robust knife and cam configuration, the thread trimmer reliably cuts threads as thick as #5. The vertical strokes of presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head. In addition the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times. WHEN YOU PLCE ORDER Gauge for standard [Without automatic thread trimmer] LU1508N LU1510N [With automatic thread trimmer] LU1510N70 15 pplication For heavy materials For extra heavy materials Gauge for LU-2200 H Pneumatic auto-lifter Pedal switch type (K123) DL device Not provided Provided Z Option Not provided E-10 (obbin thread remaining amount detecting device) Z [Without automatic thread trimmer] LU1509N [With automatic thread trimmer] LU1511N70 pplication For heavy materials For extra heavy materials H Pneumatic auto-lifter Pedal switch type (K123) DL device Not provided Provided Z Option Not provided E-10 (obbin thread remaining amount detecting device) Z PC box/operation panel for C C380 Motor for C M PC box For General ingle-phase V 07 Export 3-phase V 11 For JU(L) ingle-phase V 37 3-phase V 38 For CE ingle-phase V 34 Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. E500 Operation panel display language: English. Instruction manual comes in five different languages. E500C Motor For General ingle-phase Export 3-phase V 60 For JU(L) ingle-phase V 61 3-phase V 62 For CE ingle-phase V 63 JU: North merica and Central and outh merica. LU-1508N, 1508NH, 1510N, 1510N-7, 1509N, 1509NH, 1511N-7 (eptember, 2003) 1/4

193 PECIFICTION Model name LU-1508N, LU-1509N LU-1508NH, LU-1509NH LU-1510N LU-1510N-7, LU-1511N-7 With automatic thread trimmer pplication For heavy materials For extra heavy materials For heavy materials Max. sewing speed 2,500rpm 2,000rpm 2,500rpm 3,000rpm Max. stitch length 9mm (Normal/Reverse feed) 10mm (Normal/Reverse feed) 9mm (Normal/Reverse feed) Needle bar stroke 36mm 38mm 36mm Lift of the presser foot y hand: 9mm, y knee: 16mm (max.) y hand: 9mm, uto: 16mm uto-lifter Option Provided as standard (Pneumatic auto-lifter: K123) lternating vertical movement mm 16.5mm Dial for adjustment of alternating vertical movement Provided as standard Thread take-up lide type Hook Vertical-axis double-capacity hook Needle R or (at the time of delivery) (Nm160) Nm125Nm180 (Nm160) Nm125Nm200 (Nm160) Nm125Nm180 Thread #30#5, 46138, #20#1, 69207, #30#5, 46138, Nm=60/320/3 Nm=40/38/3 Nm=60/320/3 Locus of feed Rectangular feed Complete rectangular feed Rectangular feed Needle thread tension box Dual-tension method ottom-feed micro-adjustment mechanism Provided as standard Pitch changing method y dial obbin thread winder uilt on the machine head Knee-lifter mechanism uilt on the machine head afety mechanism Provided as standard (Reset with the push of a button) Lubrication Centralized oil wick lubrication (hook: automatic) utomatic Lubricating oil JUKI New Defrix Oil No.2 (equivalent to IO VG32) Distance from needle to machine arm 255mm ed size 517mm178mm Weight of the machine head 42.5kg 44.5kg 43kg 48kg utomatic reverse feed function Option Provided as standard Compressed air and air consumption 0.5MPa {5kg/F} 0.3NR/min Power requirement ingle-phase V, V 3-phase V, V Power consumption 550V OPTION Model Part No. Description DL21 (G kit) E-10 (Kit ) GDL-21000G0 GE For installed after the setup of the machine For installed after the setup of the machine K119 GK Knee switch type K119 GK Pedal switch type Pneumatic auto-lifter K120 GK Knee switch type Pneumatic auto-lifter K120 GK Pedal switch type (provided with air regulator) Pneumatic one-touch type reverse feed stitching device (provided with air regulator) H152 MH P2 WP D2 WP KN2 uspended ruler MY-L6100 Core dia. 610mm Piping holder MY-L6200 Core dia. 25mm PK75 3-pedal unit N P dditional spring for presser bar Feature pplicable model: LU-1510N-7, LU-1511N-7 For sewing processes that handle heavy materials or multi-layered parts of material, the alternating vertical movements of the walking foot and presser foot can be quickly set to maximum by pressing the DL switch. The result is beautiful seams free from gathered stitches. The machine is provided with both hand switch and knee switch. The bobbin thread remaining-amount detecting device warns the operator with a buzzing sound and lamp indication of the time for bobbin thread replacement. This allows the operator to concentrate on sewing work without concern for the remaining amount of bobbin thread. ince the device directly detects the bobbin thread amount remaining, cumbersome setting is no longer required regardless of the material, thread and process. pplicable model: LU-1508N, LU-1508HN, LU-1510N, 1509N, 1509NH pplicable model: LU-1508N, LU-1508HN, LU-1510N, 1509N, 1509NH To use auto-lifter and reverse feed stitching device in combination, select K119 or K119 pplicable model: LU-1510N-7, LU-1511N-7 Highly operable 3-pedal unit for standing work. LU-1508N, 1508NH, 1510N, 1510N-7, 1509N, 1509NH, 1511N-7 (eptember, 2003) 2/4

194 EXCHNGELE GUGE PRT Description Throat plate Feed dog Notes Lower fittings standard (equipped on machine) (area: ) (needle hole: ) (groove in front and back) (needle hole: ) (groove in front and back) Equipped on LU-1508N, LU-1508NH, LU-1510N titch length up to 9mm (10mm in case of LU-1508NH) Equipped on LU-1510N-7 titch length up to 9mm Lower fittings standard (needle hole: ) (groove at back) Equipped on LU-563N titch length up to 9mm Not applicable to LU-1510N-7 Lower fittings (no groove) (area: ) (needle hole: ) (No groove) titch length up to 9mm Not applicable to LU-1510N-7 Lower fittings for thin needle (needle hole: 2.4) (needle hole: 1.9) D titch length up to 9mm Not applicable to LU-1510N-7 Fitting for piping (area: ) (needle hole: 2.58) titch length up to 9mm Not applicable to LU-1510N Lower fittings for tape binding C00 (area: ) C00 (needle hole: 2.5) titch length up to 7mm Not applicable to LU-1510N-7 Description Presser foot Walking foot Notes H00 (width: 6.2, needle hole: 2.8) Equipped on LU-1508N, LU-1508NH LU-1510N, LU-1510N H0 titch length up to 10mm 14 D E0 (width: 6.2, needle hole: 2.8) (front-open) titch length up to 10mm Upper fittings standard (width: 6.2, needle hole: 2.8) (with groove, teeth at the toe) titch length up to 10mm uitable for thick thread (width: 4.5, needle hole: 2.8) titch length up to 10mm C00 (width: 4.5, needle hole: 2.3) titch length up to 10mm (width: 9.6mm) (width: 6, needle hole: 2.2) (front-open) titch length up to 6mm Upper fittings left handed C (width: 7.7mm) (with groove) C (width: 5.7, needle hole: 2.3) (with teeth) titch length up to 6mm LU-1508N, 1508NH, 1510N, 1510N-7, 1509N, 1509NH, 1511N-7 (eptember, 2003) 3/4

195 Description Presser foot Walking foot Notes D (width 6.7mm) (with teeth) D (width 4.1, needle hole: 2.6) (with teeth) titch length up to 8mm Upper fittings left handed D (width 9.4mm) (with teeth) MQ (width 17mm) (with teeth) (width 4.5, needle hole: 2.2) (with teeth at the toe) MN (width 13.5, needle hole: 2.5) (with teeth at the toe) titch length up to 10mm titch length up to 10mm Upper fittings for binding 8.3 MQ (width 13.5, needle hole: 2.5) titch length up to 10mm MQ (width 13.5mm) (with teeth) 8.3 MQ (width 10, needle hole: 2.5) titch length up to 10mm Upper fittings right handed (width 9.5mm) (with teeth) (width 5.5, needle hole: 2.6) (with teeth) titch length up to 8mm E E00 (width 10, needle hole: 2.55) titch length up to 10mm Upper fittings wide (width 8, needle hole: 2.3) titch length up to 10mm (width 8, needle hole: 2.3) titch length up to 6mm *: [D, F, H, K] (width 4.5, needle hole: 2.1) (universal, regardless of size) titch length up to 8mm election of presser foot: C : 4.0mm (5/32") D : 4.8mm (3/16") F : 6.4mm (1/4") H : 7.9mm (5/16") K : 9.5mm (3/8") Upper fittings for piping *: [C, D, F, H, K] *: [D, F, H,K] (width 13, needle hole: 2.4) (with teeth) titch length up to 8mm election of presser foot: C : 4.0mm (5/32") D : 4.8mm (3/16") F : 6.4mm (1/4") H : 7.9mm (5/16") K : 9.5mm (3/8") *: [D, F, H, K] (width 16.6mm) (with teeth) *: [D, F, H,K] (width 8.2, needle hole: 2.7) (with teeth) titch length up to 8mm election of presser foot: D : 4.8mm (3/16") F : 6.4mm (1/4") H : 7.9mm (5/16") K : 9.5mm (3/8") Upper fittings for piping (back cut) *: [D, F, H] *: [D, F, H] (width 5.9, needle hole: 2.4) titch length up to 8mm election of presser foot: D : 4.8mm (3/16") F : 6.4mm (1/4") H : 7.9mm (5/16") Upper fittings for piping (double groove) *: [, D, F, H, K] (width 4.5, needle hole: 2.1) (universal, regardless of size) titch length up to 8mm election of presser foot: (width) : 3.2mm (1/8") -19.0mm D : 4.8mm (3/16") -19.0mm F : 6.4mm (1/4") -19.0mm H : 7.9mm (5/16") -24.0mm K : 9.5mm (3/8") -22.5mm LU-1508N, 1508NH, 1510N, 1510N-7, 1509N, 1509NH, 1511N-7 (eptember, 2003) 4/4

196 2-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hooks [Gauge for standard] LU-1560N (with automatic lubricating mechanism) LU-1560N-7 LU-1565N (with organized split needle bar) [Gauge for LU-2200] LU-1561N LU-1561N-7 (with automatic lubricating mechanism and automatic thread trimmer) (with automatic lubricating mechanism and automatic thread trimmer) The new mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering. The reduced lift of the feed dog helps prevent the material from flopping and reduces operating noise and vibration. Rectangular feed Compared with the elliptical feed, the rectangular feed helps reduce gathered stitches. With the adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism, and a unison feed mechanism, the machine can feed heavy materials powerfully and smoothly. Well tensed seams are consistently produced without pitch errors. LU-1560N, LU-1561N, LU-1560N-7, LU-1561N-7 utomatic lubricating mechanism improves maintainability. The sub oil pan and double filter prevent dust from entering the oil. LU-1560N-7-0/XC-E500 LU-1560N-7, LU-1561N-7 The machine comes with JUKI's proven thread trimming mechanism. With its robust knife and cam configuration, the thread trimmer reliably cuts threads as thick as #5. LU-1565N The organized split needle bar mechanism makes it possible to stop or reset the left or right needle by operating a onetouch utility lever. The machine produces neatly finished stitches at corner parts of the material. PECIFICTION Model name LU-1560N LU-1561N LU-1560N-7 LU-1561N-7 LU-1565N With automatic thread trimmer With organized split needle bar pplication For heavy materials Max. sewing speed 2,500rpm 2,000rpm Max. stitch length 9mm (Normal/Reverse feed) Needle bar stroke 36mm 33.4mm Lift of the presser foot y hand: 9mm, y knee: 16mm (max.) y hand: 9mm, uto: 16mm y hand: 9mm, y knee: 13mm (max.) uto-lifter Option Provided as standard (Pneumatic auto-lifter: K123) Option 4.8mm, 6.4mm, 7.9mm, 6mm, 8mm, 10mm, 4.8mm, 6.4mm, 7.9mm, 6mm, 8mm, 10mm, 4.8mm, 6.4mm, 7.9mm Needle gauge 9.5mm, 12.7mm (3/16, 1/4, 5/16, 3/8, 1/2) 12mm 9.5mm, 12.7mm (3/16, 1/4, 5/16, 3/8, 1/2) 12mm (3/16, 1/4, 5/16) Organized split needle bar Provided as standard lternating vertical movement mm 16.5mm mm Dial for adjustment of alternating vertical movement Provided as standard Thread take-up lide type Hook Vertical-axis double-capacity hook Needle (at the time of delivery) (Nm160) Nm125Nm180 Thread #30#5, 46138, Nm=60/320/3 Locus of feed Rectangular feed Needle thread tension box ingle-tension method Pitch changing method y dial obbin thread winder uilt on the machine head Knee-lifter mechanism uilt on the machine head uilt on the machine head afety mechanism Provided as standard (Reset with the push of a button) Lubrication utomatic y an oiler (hook: automatic) Lubricating oil JUKI New Defrix Oil No.2 (equivalent to IO VG32) Distance from needle to machine arm 255mm ed size 517mm178mm Weight of the machine head 45kg 51kg 45kg utomatic reverse feed function Option Provided as standard Compressed air and air consumption 0.5MPa {5kg/F} 0.3NR/min Power requirement ingle-phase V, V 3-phase V, V Power consumption 550V 15 LU-1560N, 1560N-7, 1565N, 1561N, 1561N-7 (eptember, 2003) 1/5

197 WHEN YOU PLCE ORDER Gauge for standard [Without automatic thread trimmer] [With automatic thread trimmer] Needle gauge 4.8mm (3/16") 6.4mm (1/4") 7.9mm (5/16") 9.5mm (3/8") 12.7mm (1/2") D F H K L Needle gauge 4.8mm (3/16") 6.4mm (1/4") 7.9mm (5/16") D F H Needle gauge 4.8mm (3/16") 6.4mm (1/4") 7.9mm (5/16") 9.5mm (3/8") 12.7mm (1/2") D F H K L Pneumatic auto-lifter Pedal switch type (K123) LU1560N LU1565N LU1560N 70 Presser foot Center guide For the gauge groups H, K and L only, the presser foot group (equipped with center guide) can be selected. DL device Not provided Provided Z Option Not provided E-10 (obbin thread remaining amount detecting device) Z Needle gauge correspondence table (1) The needle gauges marked with a circle ( ) in the table below are prepared as optional parts (separately available). (2) The needle gauges marked with a circle are selectable at the time the order is placed. LU-1560N eries Model name Needle 3.2mm 4.8mm 6.4mm 7.9mm 9.5mm 12.7mm 15.9mm 19.1mm 22.2mm 25.4mm 28.6mm 31.8mm gauge (1/8") (3/16") (1/4") (5/16") (3/8") (1/2") (5/8") (3/4") (7/8") (1") (1-1/8") (1-1/4") D F H K L LU-1560N LU-1560N-7 LU-1565N Gauge for LU-2200 [Without automatic thread trimmer] LU1561N Needle gauge 6mm 8mm C 10mm D 12mm E [With automatic thread trimmer] Pneumatic auto-lifter Pedal switch type (K123) Needle gauge 6mm 8mm 10mm 12mm LU1561N 70 C D E DL device Not provided Provided Z Option Not provided E-10 (obbin thread remaining amount detecting device) Z Needle gauge correspondence table (1) The needle gauges marked with a circle ( ) in the table below are prepared as optional parts (separately available). (2) The needle gauges marked with a circle are selectable at the time the order is placed. LU-1561N eries Model name Needle gauge 4mm 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 24mm 26mm 30mm C D E LU-1561N LU-1561N-7 PC box/operation panel for C C380 Motor for C M PC box For General ingle-phase V 07 Export 3-phase V 11 For JU(L) ingle-phase V 37 3-phase V 38 For CE ingle-phase V 34 Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. E500 Operation panel display language: English. Instruction manual comes in five different languages. E500C Motor For General ingle-phase Export 3-phase V 60 For JU(L) ingle-phase V 61 3-phase V 62 For CE ingle-phase V 63 JU: North merica and Central and outh merica. LU-1560N, 1560N-7, 1565N, 1561N, 1561N-7 (eptember, 2003) 2/5

198 OPTION Model Part No. Description DL21 (G kit) E-10 (Kit ) GDL-21000G0 GE For installed after the setup of the machine For installed after the setup of the machine K119 GK Knee switch type K119 GK Pedal switch type Pneumatic auto-lifter K120 GK Knee switch type Pneumatic auto-lifter K120 GK Pedal switch type (provided with air regulator) Pneumatic one-touch type reverse feed stitching device (provided with air regulator) H152 MH P2 WP D2 WP KN2 uspended ruler PK75 3-pedal unit N P dditional spring for presser bar Feature pplicable model: LU-1560N-7, LU-1561N-7 For sewing processes that handle heavy materials or multi-layered parts of material, the alternating vertical movements of the walking foot and presser foot can be quickly set to maximum by pressing the DL switch. The result is beautiful seams free from gathered stitches. The machine is provided with both hand switch and knee switch. The bobbin thread remaining-amount detecting device warns the operator with a buzzing sound and lamp indication of the time for bobbin thread replacement. This allows the operator to concentrate on sewing work without concern for the remaining amount of bobbin thread. ince the device directly detects the bobbin thread amount remaining, cumbersome setting is no longer required regardless of the material, thread and process. pplicable model: LU-1560N, LU-1561N, LU-1565N pplicable model: LU-1560N, LU-1561N, LU-1565N To use auto-lifter and reverse feed stitching device in combination, select K119 or K119 pplicable model: LU-1560N-7, LU-1561N-7 Highly operable 3-pedal unit for standing work. 15 LU-1560N, 1560N-7, 1565N, 1561N, 1561N-7 (eptember, 2003) 3/5

199 EXCHNGELE GUGE PRT LU-1560N Needle gauge size Throat plate Needle clamp asm. Presser foot asm. Walking foot asm. Needle hole 2.5 with groove Feed dog Needle hole lide plate, left lide plate, right mm (1/8") D 4.8mm (3/16") F 6.4mm (1/4") H 7.9mm (5/16") K 9.5mm (3/8") L 12.7mm (1/2") mm (5/8") mm (3/4") mm (7/8") mm (1") 28.6mm (1-1/8") mm (1-1/4") LU-1560N Needle gauge size Walking foot asm. Needle hole 2.67 slit D F H K L 3.2mm (1/8") 4.8mm (3/16") 6.4mm (1/4") 7.9mm (5/16") 9.5mm (3/8") 12.7mm (1/2") 15.9mm (5/8") 19.1mm (3/4") 22.2mm (7/8") 25.4mm (1") 28.6mm (1-1/8") 31.8mm (1-1/4") (option) LU-1560N-7 Needle gauge size Throat plate Needle clamp asm. Presser foot asm. Walking foot asm. Needle hole 2.5 Feed dog Needle hole lide plate, left lide plate, right mm (1/8") D 4.8mm (3/16") F 6.4mm (1/4") H 7.9mm (5/16") K 9.5mm (3/8") L 12.7mm (1/2") mm (5/8") mm (3/4") mm (7/8") mm (1") mm (1-1/8") LU-1560N, 1560N-7, 1565N, 1561N, 1561N-7 (eptember, 2003) 4/5

200 LU-1561N, LU-1561N-7 Needle gauge size Throat plate Needle clamp asm. Presser foot asm. Walking foot asm. Feed dog Needle hole lide plate, left lide plate, right mm C 6mm 8mm D 10mm E 12mm mm 16mm mm mm mm mm mm mm LU-1565N Needle gauge size Throat plate Needle clamp asm., left Needle clamp asm., right Presser foot asm. Walking foot asm. Needle hole 2.67 with groove & teeth Feed dog Needle hole D 4.8mm (3/16") D DL DR D D00 F 6.4mm (1/4") F FL FR F F00 H 7.9mm (5/16") H HL HR H H00 9.5mm (3/8") K KL KR K K mm (1/2") L LL LR L L00 LU-1565N Needle gauge size lide plate, left lide plate, right Walking foot asm. Needle hole 2.67 slit Feed dog Needle hole 2.65 Feed dog Needle hole D F H 4.8mm (3/16") 6.4mm (1/4") 7.9mm (5/16") 9.5mm (3/8") 12.7mm (1/2") E J LU-1560N, LU-1560N-7, LU-1565N (option) (option) (option) D F H K L0 (option) D F H K L0 Description Presser foot asm. Walking foot asm. Notes Upper fittings for french-seam (with center guide) (a) (width: 21.4mm) (b) (width: 23.0mm) (c) (width: 26.0mm) (a) (needle hole: 2.5) (with groove) (b) (needle hole: 2.5) (with groove) (c) (needle hole: 2.5) (with groove) (a) (needle hole: 2.5) (b) (needle hole: 2.5) (c) (needle hole: 2.5) For LU-1560N and LU-1565N. Needle distance: (a) mm (5/16") (b) mm (3/8") (c) mm (1/2") For LU-1560N-7. Needle distance: (a) mm (5/16") (b) mm (3/8") (c) mm (1/2") 15 LU-1560N, 1560N-7, 1565N, 1561N, 1561N-7 (eptember, 2003) 5/5

201 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer (needle thread roll-in and short tail type) [Gauge for standard] LU-1520N-7 [Gauge for LU-2200] LU-1521N-7 The remaining length of thread at the end of sewing is substantially shortened to approximately 5mm. The machine cuts thread as thick as #5 without fail. Even if the needle thread is clamped under the presser foot or walking foot, the machine draws the needle thread onto the underside of the material without fail, leaving no exposed thread on the right side. The needle thread drawn onto the underside of the material can be sewn under the seam. The end-of-sewing thread is kept in the seam allowance both at the beginning and end of sewing and does not jut out from the material edge. This function eliminates the need for thread snipping. The operator is able to concentrate on sewing work without having to perform thread snipping work, thereby dramatically increasing productivity. The frequency of scissor use by the operator is significantly reduced, thereby preventing accidents in which the scissors damage the material. LU-1520N-7-0/XC-E500 WHEN YOU PLCE ORDER LU152 N70 pecification Gauge for 0 Gauge for LU Pneumatic auto-lifter Pedal switch type (K124) DL device Not provided Provided Z Option Not provided E-10 (obbin thread remaining amount detecting device) Z 15 [PC box/operation panel for C] [Motor for C] C380 M PC box For General ingle-phase V 07 Export 3-phase V 11 ingle-phase V 37 For JU(L) 3-phase V 38 For CE ingle-phase V 34 JU: North merica and Central and outh merica. Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages. E500 E500C Motor For General ingle-phase Export 3-phase V 60 ingle-phase V 61 For JU(L) 3-phase V 62 For CE ingle-phase V 63 JU: North merica and Central and outh merica. LU-1520N-7, 1521N-7 (eptember, 2003) 1/2

202 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot uto-lifter Thread take-up lternating vertical movement Dial for adjustment of alternating vertical movement mount of thread remaining Needle thread roll-in device ottom-feed micro-adjustment mechanism Hook Needle (at the time of delivery) Thread Needle thread tension box Pitch changing method obbin thread winder afety mechanism utomatic reverse feed function Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head Compressed air and air consumption Power requirement LU-1520N-7 LU-1521N-7 3,000rpm 9mm (Normal/Reverse feed) 36mm y hand: 9mmuto: 16mm Provided as standard (Pneumatic auto-lifter: K124) lide type 16.5mm Provided as standard 5mm It varies depending on the sewing conditions. Provided as standard Provided as standard Vertical-axis double-capacity hook (Nm160) Nm125Nm180 or DP17(#23) #16#24 #30#5, 46138, Nm=60/320/3 Dual-tension method y dial uilt on the machine head Provided as standard Provided as standard utomatic JUKI New Defrix Oil No.2 (equivalent to IO VG32) 255mm 517mm178mm 49.5kg 0.5MPa (5kgf/F)0.3NR/min ingle-phase V, V 3-phase V, V OPTION Model Part No. Feature DL21 (F kit) GDL-21000F0 E-10 (Kit ) GE The DL device can be used to instantaneously maximize the alternate vertical movement amount. This device is useful, in particular, in processes for sewing products with many multi-layered parts. The machine is provided with both hand switch and knee switch. The bobbin thread remaining-amount detecting device warns the operator with a buzzing sound and lamp indication of the time for bobbin thread replacement. This allows the operator to concentrate on sewing work without concern for the remaining amount of bobbin thread. ince the device directly detects the bobbin thread amount remaining, cumbersome setting is no longer required regardless of the material, thread and process. GUGE pplication Part name Part No. Remarks Gauge for light-weight materials Feed dog Width 4.5mm, Needle hole 2.2 Throat plate With no knurl on the top face, groove width 5.0mm Toothed gauge Walking foot Width 13mm Presser foot Width 4.5mm, Needle hole 2.2 (with groove) LU-1520N-7, 1521N-7 (eptember, 2003) 2/2

203 High-speed, 1-needle, Unison-feed, Lockstitch Machine with Large Hook and utomatic Thread Trimmer LU-2210N-7 (1.6 fold-capacity hook) LU-2210W-7 (double-capacity hook) High-speed, 2-needle, Unison-feed, Lockstitch Machine with Large Hooks and utomatic Thread Trimmer LU-2260N-7 (1.6 fold-capacity hook) LU-2260W-7 (double-capacity hook) Thanks to its remarkable feed efficiency and improved feed cam unit, the machine smoothly feeds materials at high speeds while preventing stitch gathering. The machine is also equipped with a new box-type feed locus that enables the production of beautifully finished seams free from material flopping. The rigid movement of the knife-driving shaft and ideal shape of the cam enable the thread trimmer to trim thread as thick as #5. Further-more, no adjustment is necessary after changing the thread count. The vertical strokes of the presser foot and walking foot (their alternating vertical movement) can be easily changed using a large dial mounted on the top surface of the machine head. In addition, the sewing speed is automatically adjusted with the set value. With this feature, ideal sewing conditions are maintained at all times. The LU-2210N-7 and -2260N-7 are equipped with a vertical-axis 1.6 foldcapacity hook, and the LU-2210W-7 and -2260W-7 with a vertical-axis double-capacity hook. These hooks promote highly efficient operation by reducing the frequency of bobbin thread replacement. LU-2210N-7-0/XC-E500 LU-2260N-7-0/XC-E500 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Needle gauge (mm) Lift of the presser foot uto lifter Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread afety mechanism Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head utomatic reverse feed function Compressed air and air consumption Power requirement LU-2210N-7 LU-2210W-7 LU-2260N-7 LU-2260W-7 1-needle 2-needle 3,500rpm 9mm (normal/reverse feed) 6mm (normal/reverse feed) 33.8mm 6, 8, 10 (standard), 12, 20 y hand: 9mm, y knee: 16mm (max) Provided as standard (pneumatic auto-lifter: K79) Link type 16.5mm Vertical-axis 1.6 fold-capacity hook Vertical-axis double-capacity hook (Nm140) Nm100Nm180 #30#4, 46138, Nm=60/320/3 Vertical-axis 1.6 fold-capacity hook Vertical-axis double-capacity hook (Nm140) Nm100Nm160 #20#5, 64138, Nm=40/320/3 Provided as standard utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) 264mm 517mm178mm 55kg 58kg Provided as standard 0.5MPa (5kgf/cm 2 ), 0.3N /min ingle-phase V, V 3-phase V, V Configured for needle gauge widths from 4mm to 36mm (LU-2260N-7) and 4mm to 30mm (LU-2260W-7). Note that gauges not given above are also available on special order. LU-2210N-7, 2210W-7, 2260N-7, 2260W-7 (eptember, 2003) 1/4 15

204 WHEN YOU PLCE ORDER Hook Feed dog DL function 1.6 fold-capacity hook Double-capacity hook N W (with groove) Without groove Provided with DL function/ knee switch type For thin thread (2.5mm1.6mm) LU Walking foot Presser foot Option Not provided Z For urethane Right single-sided presser Left single-sided presser For piping 3mm C D E For material with overlapped sections For urethane Right single-sided presser Left single-sided presser C D E E-9 (obbin thread remaining amount detecting device) For the hook group N (1.6 fold-capacity hook) only, the option group (equipped with E-9) can be selected. For piping 4mm F For piping 3mm F For piping 5mm G For piping 4mm G For piping 6mm H For piping 5mm H djustable type for piping 3mm J For piping 6mm J djustable type for piping 4mm K Pressing face is reduce K djustable type for piping 5mm L djustable type for piping 6mm M LU Hook 1.6 fold-capacity hook Double-capacity hook titch length 6mm N W Needle gauge 6mm 8mm 10mm (standard) 12mm 20mm C D E J Waking foot/ Presser foot/feed dog DL function Provided with DL function/ knee switch type Option Not provided Z E-9 (obbin thread remaining amount detecting device) For the hook group N (1.6 fold-capacity hook) only, the option group (equipped with E-9) can be selected. PC box/operation panel for C C380 PC box Operation panel For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C Motor for C M For General Export For JU (L) Motor ingle-phase 3-phase ingle-phase 3-phase V V V For CE ingle-phase V JU: North merica and Central and outh merica LU-2210N-7, 2210W-7, 2260N-7, 2260W-7 (eptember, 2003) 2/4

205 INTERCHNGELE GUGE PRT LU-2210N-7, LU-2210W-7 ewing conditions Walking foot Presser foot For material with overlapped section llows the smooth feed of multi-layered portions of the material For light-weight sponge Used for resilient materials including sponge K C (pressing face is reduced) For material with overlapped section For urethane For heavy sponge Used for more resilient materials Thick For urethane Right single-sided presser Used for sewing material edges 1mm C Right single-sided presser D Right single-sided presser Left single-sided presser Used for sewing material edges 1mm D Left single-sided presser E Left single-sided presser For piping Used for the general piping process EH For piping FJ For piping For piping The position of the needle can be adjusted according to the pipe to be sewn Wide type To be used when a sewing product cannot be smoothly fed djustable JM djustable presser for piping (special order) (special order) Feed dog 3.3mm 2.2mm 3.3mm 2.2mm 2.5mm 1.6mm 3.3mm 2.2mm Without a groove Used when the needle thread does not interlace consisting with the bobbin thread at the start of sewing. For thin thread Wide type (special order) Throat plate Wide type (special order) LU-2210N-7, 2210W-7, 2260N-7, 2260W-7 (eptember, 2003) 3/4

206 LU-2260N-7, LU-2260W-7 Needle gauge Typical part No. Needle clamp Presser foot Walking foot Needle plate Feed dog lide plate Left Right 4mm (special order) mm mm mm (special order) mm 14mm (special order) mm (special order) mm (special order) mm mm (special order) mm (special order) mm (special order) mm (special order) The right and left slide plates are not included in the parts represented by the typical part numbers. OPTION Model Part No. Description E-9 (kit C) E-9 (kit D) GE09000C0 GE09000D0 for LU-2210N-7 for LU-2260N-7 For installed after the setup of the machine Feature The bobbin thread remaining-amount detecting device warns the operator with a buzzing sound and lamp indication of the time for bobbin thread replacement. This allows the operator to concentrate on sewing work without concern for the remaining amount of bobbin thread. ince the device directly detects the bobbin thread amount remaining, cumbersome setting is no longer required regardless of the material, thread and process. TTCHMENT Part name H152 (suspended ruler) Part No. MH LU-2210N-7, 2210W-7, 2260N-7, 2260W-7 (eptember, 2003) 4/4

207 1-needle, Lockstitch, Zigzag titching Machine with Large Hook LZH-1290 LZH (with automatic thread trimmer) With its newly incorporated triangular cam, the machine uniformly tenses thread in zigzag strokes regardless of the needle position, and the needle always enters the material at right angles. This prevents the needle from swaying during zigzag stitching. The machine offers outstanding capabilities for the sewing of sports shoes and leather shoes that require a wider zigzag width. The zigzag width can be quickly and easily adjusted by the dial mounted on the front face of the machine. To ensure smooth sewing of heavy materials, the lift of the presser foot is as high as 14mm (13mm for the LZH ). y reducing the frequency of bobbin thread replacement, the newly introduced horizontal-axis double-capacity hook contributes to increased efficiency in sewing. This feature is extremely helpful when sewing with thick thread. LZH The machine's unique thread trimmer mechanism allows the thread trimmer to cut the thread when the needle is either at the left or right end of its zigzag stroke. This mechanism also eliminates the need for adjustment even when the thread count is changed. LZH /XC-E500 PECIFICTION Model name Max. sewing speed Max. stitch length Zigzag width Zigzag width adjustment method Needle bar stroke Lift of the presser foot Thread take-up Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head utomatic reverse feed function Power requirement LZH-1290 LZH ,000rpm 6mm (normal/reverse feed) Max. 8mm (adjustable to 10mm) y dial 35mm y hand: 6mm, y knee: 14mm y hand: 6mm, y knee: 13mm Link type Horizontal-axis full-rotary double-capacity hook Y1906 (Nm110) Nm90Nm110 #50#8, 3392, Nm=120/330/3 y an oiler (hook: automatic) JUKI New Defrix Oil No.1 (equivalent to IO VG7) 295mm 477mm178mm 35kg 39kg Provide as standard ingle-phase V, V, 3-phase V, V 15 LZH-1290, (eptember, 2003) 1/2

208 WHEN YOU PLCE ORDER Without automatic thread trimmer LZH1290 Motor for C M With automatic thread trimmer LZH129070/ For General Export Motor ingle-phase 3-phase V 60 Pneumatic auto-lifter Not provided Knee switch type (K112C) C For JU (L) For CE ingle-phase 3-phase ingle-phase V V V Pedal switch type (K112) PC box/operation panel for C C380 PC box Operation panel For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C JU: North merica and Central and outh merica. GUGE Type For frictional material For zigzag width of 10mm Provided with 3-row feed dog a center guide (pearl-bright finish) Presser foot Throat plate Feed dog Zigzag width: Max. 8mm Zigzag width: Max. 8mm Zigzag width: Max. 10mm Zigzag width: Max. 8mm Zigzag width: Max. 6mm Remarks The pearl-bright finish presser foot has the same surface smoothness as the teflon-finish type, but its rigidity is markedly superior. Gauges other than the standard one are optionally available. LZH-1290, (eptember, 2003) 2/2

209 Long-arm, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer LU-2216N-7 (1-needle) LU-2266N-7 (2-needle) oth the LU-2216N-7 (1-needle) and LU-2266N-7 (2-needle) achieve the maximum sewing speed of 3,000rpm. With this capability, the machine demonstrates higher productivity when sewing long lengths of materials. With the long distance from the machine arm to the center of the needle, a full 650mm, the machine is ideally suited to reinforcement stitching processes for attaching tape and intermediate sewing processes such as topstitching for large work pieces. With its powerful feed and optimal feed locus, the machine smoothly feeds materials without stitch gathering even when running at a higher sewing speed. The standard machine lets the operator adjust the vertical stroke of the walking foot and presser foot (DL device). In processes such as the sewing of heavy materials or hard-to-feed multilayered portions, a press on the DL switch instantly changes over the vertical stroke of the walking foot and presser foot. The result is beautifully produced seams without stitch gathering. The vertical stroke of the walking foot and presser foot can be easily set and changed. LU-2266N-7-0/XC-E500 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Needle gauge Lift of the presser foot uto lifter Thread take-up lternating vertical movement DL device Hook Needle (at the time of delivery) Thread afety mechanism Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head utomatic reverse feed function Compressed air and air consumption Power requirement LU-2216N-7 LU-2266N-7 1-needle 2-needle 3,000rpm 9mm (normal/reverse feed) 6mm (normal/reverse feed) 36mm 10mm (standard) y hand: 9mm, uto: 16mm Provide as standard (pneumatic auto-lifter: K115) Link type 16.5mm Provide as standard Vertical axis 1.6 fold-capacity hook (Nm140) Nm100Nm (Nm140) Nm100Nm160 #30#4, 46138, Nm=60/320/3 #20#5, 69138, Nm=40/320/3 Provided as standard utomatic JUKI New Defrix Oil No.1 (equivalent to IO VG7) 650mm 917mm178mm 90kg 95kg Provided as standard 0.5MPa (5kgf/cm 2 ), 0.3N /min. ingle-phase V, V, 3-phase V, V LU-2216N-7, 2266N-7 (eptember, 2003) 1/2 16

210 WHEN YOU PLCE ORDER LU2216N70 LU2266ND70 Walking foot Presser foot Feed dog ny gauge other than the standard is available on a part order. (ee the table of replaceable gauges.) Needle gauge 10mm (standard) D Walking foot Presser foot Feed dog PC box/operation panel for C C380 PC box Operation panel For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C JU: North merica and Central and outh merica. Motor for C M Motor For General Export ingle-phase 3-phase V 60 For JU (L) ingle-phase 3-phase V V For CE ingle-phase V 63 GUGE PRT ome gauge used in the LU-2210N/-2260N eries The gauge (hook, bobbincase, walking foot, presser foot and feed) used in the LU-2210N/-2260N series is also used in this model. ll of the parts used in your LU-2210N/-2260N sewing machines can also be used in the LU-2216N/-2266N machines. In addition, the knife and thread tension components are also the same. TTCHMENT Part name H152 (suspended ruler) Part No. MH LU-2216N-7, 2266N-7 (eptember, 2003) 2/2

211 1-needle, Top & ottom-feed, Long-arm, Lockstitch Machine DU-580 Free space under the arm is as wide as 500mm. Thanks to this wide free space under the arm, the machine is widely applicable to heavy materials and long-sized materials. The efficiency of feed is doubled, thereby improving the ability of the feed mechanism to feed the material straight. The hinged walking foot and the feed dog feed the material placed between them, synchronizing with each other. The stitch length can be adjusted within the range of 0 to 9mm by using the dial. Thanks to this feature, this machine is widely applicable to the sewing of tents, which need to be sewn with coarse stitches, or longsized materials including car seats, and materials sewn with a thick thread. Reverse feed stitches of the same length as the normal feed stitches can be sewn only by depressing the lever. ince the machine is equipped with a double-capacity hook, the frequency of bobbin replacement is reduced, thereby leading to higher efficiency. DU-580 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head DU-580 1,500rpm 9mm (normal/reverse feed) 35mm y hand: 7mm, y knee: 15mm Link type 25mm Horizontal-axis full-rotary double-capacity hook D1 (DP17) (#21) #14#23, For JE: 1738 (Nm130) #40#8, 3392, Nm=90/330/3 y an oiler (hook: automatic) JUKI New Defrix Oil No.1 (equivalent to IO VG7) 500mm 715mm178mm 49kg WHEN YOU PLCE ORDER DU-580 EXCHNGELE GUGE PRT Description Throat plate D E00 (D=2.6) D E0 (D=4.2) D E0 (D=3.0) D 31.3 Feed dog D E00 Notes titch length: max. 8mm H0 (D=3.5) H0 (D=2.6) titch length: max. 8mm D titch length: max. 10mm (D=2.0) H00 (D=2.6) D H00 titch length: max. 9mm ingle-lined feed dog for sewing gloves and shoes Exclusive parts Roller presser foot asm for DDL: R0 Narrow type walking foot for DU: H H0T DU-580 (eptember, 2003) 1/1

212 1-needle, Unison-feed, Long rm Lockstitch Machine with Large Hook DNU-261H With its unison-feed mechanism that ensures a smooth and steady feed of materials, the machine provides consistent seam quality with no material slippage. The alternating vertical movement of the walking foot and presser foot can be widely adjusted in the range of 3 to 6mm. With this feature, the machine is able to flexibly adapt to various kinds of heavy materials. With the wide 635mm of free space under the arm, a large material can be sewn with spreading on the bed. The presser foot goes up as high as 15mm to ensure easy placements/removal of extra heavy materials. ince the machine incorporates a horizontal-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency. titch length is adjustable by up to 8mm with a stitch dial. The stitch length is also adjustable for reverse feed stitching. DNU-261H PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head DNU-261H 1,500rpm 8mm (normal/reverse feed) 38mm y hand: 9mm, y knee: 15mm lide type 36mm Horizontal-axis full-rotary double-capacity hook D17 (#23) #16#23, For JE: (Nm160) #40#8, 3392, Nm=90/3 30/3 y an oiler (hook: automatic) JUKI New Defrix Oil No.1 (equivalent to IO VG7) 635mm 850mm178mm 59kg 16 WHEN YOU PLCE ORDER DNU261H / utomatic reverse feed function Not provided Provided 00 0 Pneumatic auto-lifter (optional) Knee switch type (K70) Pedal switch type (K70) Not provided DNU-261H (eptember, 2003) 1/1

213 Cylinder-bed, 1-needle, Top & ottom-feed, Lockstitch Machine DU-145 DU (with automatic thread trimmer) The top & bottom-feed mechanism provides upgraded feed efficiency, feeding heavy material steadily and smoothly. Even when the machine runs at a high speed, this highly accurate feed mechanism promises consistent sewing performance with no irregular feed pitch. The diameter of the cylinder-bed is as small as 50mm. This allows the machine to sew sharp curves of bags, shoes and various small articles smoothly and easily. The machine comes with a horizontal-axis double-capacity hook. With double the amount of thread wound on the bobbin compared with the regular hook, sewing efficiency is further improved. y adopting an automatic lubrication system that automatically feeds oil to the hook, the need for hook maintenance is eliminated. DU With its horizontal-cutting mechanism, the automatic thread trimmer cuts various kinds high-to low-count threads. PECIFICTION DU /XC-E500 Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Cylinder-bed diameter Distance from needle to machine arm Weight of the machine head utomatic reverse feed function Power requirement DU-145 DU ,000rpm 6mm (normal/reverse feed) 37mm y hand: 7mm, y knee: 15mm y hand: 6mm, y knee: 13mm Link type 25mm Horizontal-axis full-rotary double-capacity hook DP17 (#21) #14#21, For JE: (Nm130) #50#8, 3392, Nm=120/3 30/3 y an oiler (hook: automatic) JUKI New Defrix Oil No.1 (equivalent to IO VG7) 50mm 270mm 36kg 39kg Provided as standard ingle-phase V, V 3-phase V, V WHEN YOU PLCE ORDER Without automatic thread trimmer DU145 With automatic thread trimmer DU14570/ Pneumatic auto-lifter (optional) Knee switch type (K114C) Pedal switch type (K114) Not provided PC box/operation panel for C C380 C Motor for C M For General Export For JU (L) For CE Motor ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V PC box For General Export For JU (L) ingle-phase ingle-phase V V 3-phase 3-phase V V For CE ingle-phase V JU: North merica and Central and outh merica Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C DU-145, (eptember, 2003) 1/2

214 EXCHNGELE GUGE PRT For DU-145 (-7) Description Walking foot Presser foot Notes H H0 For piping H H0 Piping size : 3.2mm (1/8") F : 6.4mm (1/4") C : 4.0mm (5/32") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") E : 5.6mm (7/32") Cut-out tail for piping H0 Double groove H HW Piping size : 3.2mm (1/8") F : 6.4mm (1/4") C : 4.0mm (5/32") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") E : 5.6mm (7/32") Left-hand H0Q HU Right-hand H0R H Narrow type for sewing gloves and shoes H0T H titch length: max. 6mm Exclusive parts Feed dog: Throat plate: For attaching zippers H0X H0X Without hardening (blank) For DU-145 (-7) Description Throat plate Feed dog Notes D E00 (: 3.0 : 2.2mm) D E00 (: 45 : 1.6mm) D E0 (: 67 : 1.7mm) Three-lined feed dog D E0 D E0 ingle-lined feed dog for sewing gloves D E0T D E0T Exclusive parts Presser foot: H0T Walking foot: H0 DU-145, (eptember, 2003) 2/2

215 Cylinder-bed, 1-needle, Unison-feed, Lockstitch Machine DC-244 (with standard hook) DC (with standard hook and automatic thread trimmer) DC-245 (with standard hook, automatically lubricated for hook) (with standard hook, automatically lubricated for hook DC and automatic thread trimmer) DC-246 (with double-capacity hook) (with double-capacity hook and automatic thread trimmer) DC The unison-feed provides the optimal feed efficiency by feeding heavy materials smoothly and firmly. The diameter of the cylinder is as small as 46mm for a standard hook or 50mm for a double-capacity hook. The small-diameter cylinder is quite helpful for handling bags, shoes, and other small articles smoothly and easily. The horizontal feed is best-suited for attaching piping tape. (V Type) The feed mechanism that can synchronize the binder in the piping-tape attachment process in the sewing of shoes. (Parts to be changed are optionally available.) DC-245 The machine is equipped with a new automatic hooklubricating system that automatically lubricates the hook. With this feature, a maintenance-free hook has finally materialized. PECIFICTION DC /XC-E500 DC-246 The hook accommodates thread twice as long as that for a standard hook. It also reduces the frequency of bobbin thread replacement, thereby enabling the operator to smoothly conduct sewing with a higher degree of efficiency. DC-244-7, DC-245-7, DC With its horizontal-cutting mechanism, the automatic thread trimmer cuts various kinds high-to low-count threads. Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Cylinder-bed diameter Distance from needle to machine arm Weight of the machine head Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Cylinder-bed diameter Distance from needle to machine arm Weight of the machine head utomatic reverse feed function Power requirement DC-244 DC-245 DC-246 2,200rpm 6mm (normal/reverse feed) 36mm 38mm y hand: 9mm, y knee: 15mm lide type mm Horizontal-axis full-rotary hook DP17 (#18) #14#21 For JE: (Nm110) #50#20, 3369, Nm=120/340/3 DC DC DC ,200rpm 6mm (normal/reverse feed) 36mm 38mm y hand: 8mm, y knee: 13mm y hand: 8mm, y knee: 14mm lide type mm Horizontal-axis full-rotary hook DP17 (#18) #14#21 For JE: (Nm110) #50#20, 3369, Nm=120/340/3 Horizontal-axis full-rotary double-capacity hook DP17 (#21) #14#23 For JE: (Nm130) #50#8, 3392, Nm=120/330/3 y an oiler y an oiler (hook: automatic) y an oiler JUKI New Defrix Oil No. 1 (equivalent to IO VG7) 46mm 50mm 264mm 39kg Provided as standard ingle-phase V, V 3-phase V, V Horizontal-axis full-rotary double-capacity hook DP17 (#21) #14#23 For JE: (Nm130) #50#8, 3392, Nm=120/330/3 y an oiler y an oiler (hook: automatic) y an oiler JUKI New Defrix Oil No. 1 (equivalent to IO VG7) 46mm 50mm 264mm 36kg DC-244, 244-7, 245, 245-7, 246, (eptember, 2003) 1/5 17

216 WHEN YOU PLCE ORDER Without automatic thread trimmer DC244/245/246 Feed system utomatic reverse feed function Elliptical feed Not provided Horizontal feed V Provided 0 With automatic thread trimmer DC244/245/246 70/ Feed system Pneumatic auto-lifter (optional) Elliptical feed Knee switch type (K110C) C Horizontal feed V Pedal switch type (K110) Not provided PC box/operation panel for C C380 PC box Operation panel For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C Motor for C M Motor For General Export ingle-phase V 3-phase ingle-phase V For JU (L) 3-phase V For CE ingle-phase V JU: North merica and Central and outh merica DC-244, 244-7, 245, 245-7, 246, (eptember, 2003) 2/5

217 EXCHNGELE GUGE PRT For DC-244 (-7), 245 (-7), 246 (-7) Description Presser foot Walking foot Notes H H0 For DNU titch length: max. 10mm (D=2.8) C00 (D=2.3) For LU & L titch length: max. 10mm D titch length: max. 10mm With teeth E E00 titch length: max. 10mm Left-hand type DC-245(-7), 246(-7) standard titch length: max. 6mm D (special order) D (special order) titch length: max. 8mm With teeth C (special order) C (special order) titch length: max. 6mm With teeth (special order) (special order) titch length: max. 8mm With teeth F (special order) F (special order) titch length: max. 6mm With teeth For binding MQ (with teeth) 6.2 MQ titch length: max. 10mm MQ (with teeth) MQ DC-246V(-7) standard titch length: max. 10mm MN DC-245V(-7) standard titch length: max. 10mm DC-244, 244-7, 245, 245-7, 246, (eptember, 2003) 3/5

218 For DC-244(-7), 245(-7), 246(-7) Description Presser foot Walking foot Notes Right-hand type titch length: max. 8mm With teeth Wide type titch length: max. 10mm Exclusive parts (for LU-1114) Throat plate: Feed dog: For leather (without teeth) titch length: max. 6mm Without finger guard Exclusive parts (for LU-1114) Throat plate: Feed dog: For piping Cut-out tail for piping For piping (with knurled foot) (special order) (commonly used for every size) (special order) titch length: max. 8mm Piping size C : 4.0mm (5/32") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") F : 6.4mm (1/4") titch length: max. 8mm Piping size C : 4.0mm (5/32") D: 4.8mm (3/16") F : 6.4mm (1/4") H : 7.9mm (5/16") titch length: max. 8mm Piping size D: 4.8mm (3/16") F : 6.4mm (1/4") H : 7.9mm (5/16") K : 9.5mm (3/18") titch length: max. 8mm Piping size D: 4.8mm (3/16") F : 6.4mm (1/4") titch length: max. 8mm Piping size C : 4.0mm (5/32") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") F : 6.4mm (1/4") Double groove (commonly used for every size) titch length: max. 8mm Piping size : 3.2mm (1/8") H: 7.9mm (5/16") D: 4.8mm (3/16") K : 9.5mm (3/8") F : 6.4mm (1/4") DC-244, 244-7, 245, 245-7, 246, (eptember, 2003) 4/5

219 For DC-245, 245-7, 246, (with groove) Description Throat plate Feed dog Notes DC-245: DC-245-7: D E00 DC-246: DC-246-7: DC-245: DC-245-7: D E00 DC-246: DC-246-7: Without groove DC-245: DC-245-7: E0 DC-246: DC-246-7: For thin needle DC-245: DC-245-7: E0 DC-246-7: Round type DC-245: C (R=28) DC-245-7: D E0C (R=28) DC-245: C DC-245-7: D E0C R R For DC-245V, 245V-7, 246V, 246V-7 (width: 14mm) Description Throat plate Feed dog Notes DC-245V: MQ DC-246V: DC-245V: MN DC-246V: (without groove) Exclusive parts Walking foot: MN Presser foot: MQ DC-245V: MQ DC-245V-7: MQ DC-246V: DC-246V-7: (with groove) Exclusive parts Walking foot: MQ Presser foot: MQ DC-245V-7: MQ DC-246V-7: DC-245V-7: DC-246V-7: (without groove) 17 Narrow type (width: 14mm) DC-245V: MQ DC-245V-7: MQ DC-246V: (with groove) Exclusive parts Walking foot: MQ Presser foot: MQ DC-245V-7: DC-246V-7: (without groove) DC-244, 244-7, 245, 245-7, 246, (eptember, 2003) 5/5

220 Cylinder-bed, 1-needle, Unison-feed, Lockstitch Machine with Vertical-axis Hook L-1340 L-1341 (with large vertical-axis hook) L-1342 (with large vertical-axis hook and gauge for small articles) (with large vertical-axis hook, gauge for small articles, and automatic thread trimmer) L With its larger needlebar stroke, larger lift of the presser foot, and newly adopted double-tension mechanism, the machine sews beautifully with thick threads (low count thread) and at higher thread tensions. This allows the machine to sew a broad range of heavy materials. The L-1340 is provided with a single-tension mechanism. The newly developed mode of highly rigid rectangular feed guarantees outstanding feed performance. In addition, the ratio between the alternating vertical movements of the walking foot and presser foot remains unchanged even when the material thickness changes. With this feature, the machine sews multi-layered parts of the material consistently and without stitch gathering. The machine is equipped as standard with a mechanism to correct uneven material feed by making-micro adjustments to the bottom-feed. The slimmed-down throat plate easily responds to the sewing of small tubular articles with diameters as small as 40mm. This enhances the machine's ability to smoothly sew not only bags and shoes, but also small articles such as wallets. WHEN YOU PLCE ORDER Without automatic thread trimmer L134 With automatic thread trimmer L L /XC-E500 L-1342, L The vertical stroke of the presser foot and walking foot (amount of alternating vertical movement) can be easily changed with the large dial mounted on the top of the machine head. The sewing speed is automatically regulated based on the vertical stroke setting. This ensures ideal sewing conditions at all times. L The machine is provided as standard with an instantaneous change-over device for the alternate vertical movement amount (DL device). For sewing processes that handle heavy materials or multi-layered parts of material, the alternating vertical movements of the walking foot and presser foot can be quickly set to maximum by pressing the DL switch. The result is beautiful seams free from gathered stitches. Motor for C M pecification pecification Motor Vertical-axis standard hook Vertical-axis 1.6 fold-capacity hook Vertical-axis 1.6 fold-capacity hook/ Gauge for small articles For the L-1342, a servomotor or motor with an electronic stop mechanism should be used. (peed control is required.) PC box/operation panel for C C380 Vertical-axis 1.6 fold-capacity hook/ Gauge for small articles Pneumatic auto-lifter Not provided Pedal switch type (K123C) 1342 For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V PC box For General Export For JU (L) ingle-phase ingle-phase V V 3-phase 3-phase V V For CE ingle-phase V JU: North merica and Central and outh merica Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C L-1340, L-1341, L-1342, L (eptember, 2003) 1/3

221 PECIFICTION Model name Gauge type Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up mount of alternating vertical movement Hook Needle (at the time of delivery) Thread afety mechanism Lubrication Lubricating oil Distance from needle to machine arm Cylinder-bed diameter Weight of the machine head utomatic reverse feed function Compressed air and air consumption Power requirement L-1340 L-1341 L-1342 L For small articles 2,000rpm 2,500rpm 6mm (Normal/Reverse feed) 36mm y hand: 9mm, y knee: 16mm lide type mm 16.5mm Vertical-axis standard hook Vertical-axis 1.6 fold-capacity hook (Nm140) Nm100~Nm180 (Nm160) Nm100~Nm180 #50#8, 3392, #40#5, 33138, #30#5, 46138, Nm=120/330/3 Nm=90/320/3 Nm=60/320/3 Provided as standard Centralized oil wick lubrication (hook: by an oiler) JUKI New Defrix Oil No.2 (equivalent to IO VG32) Compressed air is indispensable 37.5kg Option 255mm 72mm 40kg Provided as standard 0.5MPa (5kgf/cm 2 ), 0.3N /min ingle-phase V, V 3-phase V, V EWING PEED TLE The maximum sewing speed has been specified in accordance with sewing conditions as shown in table below. et the maximum sewing speed appropriately in accordance with the sewing conditions given taking care not to exceed the corresponding specified value. L-1340, L-1341 L-1342, L mount of alternate vertical movement of the walking foot and presser foot titch length: 6mm or less mount of alternate vertical movement of the walking foot and presser foot titch length: 6mm or less 2.5mm 2,500rpm Less than 2.5mm 2,500rpm 2.5mm to less than 3mm 2,200rpm 2.5mm to less than 4mm 2,200rpm 3mm to less than 4mm 2,000rpm 4mm to less than 4.75mm 1,800rpm 4mm to less than 6.5mm 1,600rpm 4.75mm to less than 6.5mm 1,600rpm L-1341 L-1342 L L-1340, L-1341, L-1342, L (eptember, 2003) 2/3

222 OPTION Pneumatic auto-lifter Model name Model name L-1342 Type Part No. K119 GK L-1340 K119 GK L-1341 K120 GK L-1342 K120 GK L K123C GK-2302E0 utomatic reverse feed function Model name L-1340, 1341, 1342 Part No witch type Knee Pedal switch type switch type ir regulator Not provided Remarks Provided with air regulator Provided To use pneumatic auto-lifter and reverse feed function in combination with a machine that is without automatic thread trimmer, select K119 or K119. Instantaneous change-over device for the alternate vertical movement amount (DL device). Part No. GDL GDL-21000E0 Remarks ccessories set containing [DL21 + utomatic reverse feed function + K123] [DL21 (E kit)] for installed after the setup of the machine The DL device cannot be used alone. It must be used in a set together with the automatic reverse feed function and K123. To mount the DL device to a machine provided with auto lifter and automatic reverse feed function, the DL21 (E kit) should be purchased separately. Combination of optional devices Model name L-1340 L-1341 L-1342 L-1342 L Combination utomatic reverse feed function Pneumatic auto-lifter Pneumatic auto-lifter+ utomatic reverse feed function Pneumatic auto-lifter+ utomatic reverse feed function+ DL device Pneumatic auto-lifter+ utomatic reverse feed function+ DL device Pneumatic auto-lifter K120 K120 K119 K119 K119 ccessories set containing [K123+ utomatic reverse feed function+dl21] K123C utomatic reverse feed function Provided as standard DL device DL21(E kit) Provided as standard Model Part No. Description Feature L-1340 L-1341 L-1342 V type kit The feed mechanism that can synchronize the binder in the piping-tape attachment process in the sewing of bags. (The V type kit cannot be installed on the L ) Tape width (mm) Finish width (mm) V type binder N074 MN-0740M0 MN-0740K0 MN-0740H L L L-1342 MN-0740F0C MN-0740E0C Edge guide inder set plate For binder MH Ruler H P2 WP D2 crew Washer uspended ruler W KN2 pring washer M TP M TP2 Presser lifter arm crew Presser lifter plate crew Pedal type lifter shaped hook Chain PK75 GPK pedal unit pplicable model: L Highly operable 3-pedal unit for standing work. V type kit Edge guide Pedal type lifter L-1340, L-1341, L-1342, L (eptember, 2003) 3/3

223 1-needle, Post-bed, Unison-feed, Lockstitch Machine PLC-1610 PLC (with automatic thread trimmer) The post-shaped bed minimizes bed's diameter, thereby providing easy operation for three-dimensional sewing. Equipped with a unison-feed system that perfectly synchronizes the presser foot, feed dog and needle, the machine feeds large-sized materials smoothly and forcefully. This results in consistent sewing performance at high speeds without irregular feed. The presser foot rises up to 15mm. This allows the operator to place/remove heavy materials such as urethane on/from the machine with ease. The machine is equipped as standard with a pneumatic auto-lifter. The vertical stroke (alternating vertical movement) of the presser foot and walking foot can be adjusted to 8mm at the maximum to accommodate the thickness of multi-layered portions of the material. With its vertical-axis 1.6 fold hook, the frequency of bobbin thread replacement is reduced. This hook increases efficiency and offers special advantages when using thick threads. PLC The machine is provided with a highly reliable thread trimmer that cuts thick thread without fail. No need for additional adjustment even when thread number count is changed. PLC /XC-E500 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot uto lifter Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Compressed air and air consumption afety mechanism obbin winder Post height ed size Weight of the machine head utomatic reverse feed function Power requirement PLC-1610 PLC ,000rpm 6mm (normal/reverse feed) 33.4mm y hand: 10mm, uto: 15mm Provided as standard (pneumatic auto-lifter: K116) lide type 28mm Vertical-axis 1.6 fold-capacity hook (Nm140) Nm110Nm160 (equivalent to #22, #18#23 ) #30#5, 46138, Nm=60/315/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 0.5MPa (5kgf/cm 2 ), 0.3N /min Provided as standard uilt on the machine arm 161.7mm 517mm178mm 48kg 50kg Provided as standard ingle-phase V, V 3-phase V, V 18 PLC-1610, (eptember, 2003) 1/2

224 WHEN YOU PLCE ORDER PLC1610 pecifications Throat plate Presser foot Feed dog Pneumatic auto-lifter Round hole (2.4) Knee switch type (K116) Pedal switch type (K116) If pedal-switch type is specified use servomotor or electronic-stop motor (DC 24 V is required.) PLC Throat plate Presser foot Feed dog Pneumatic auto-lifter Round hole (2.4) Knee switch type (K116) Pedal switch type (K116) PC box/operation panel for C C380 PC box Operation panel For General Export For JU (L) For CE ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C Motor for C M Motor For General Export ingle-phase V 3-phase ingle-phase V For JU (L) 3-phase V For CE ingle-phase V JU: North merica and Central and outh merica PLC-1610, (eptember, 2003) 2/2

225 2-needle, Post-bed, Unison-feed, Lockstitch Machine PLC-1660 The post-shaped bed minimizes bed's diameter, thereby providing easy operation for three-dimensional sewing. Equipped with a unison-feed system that perfectly synchronizes the presser foot, feed dog and needle, the machine feeds large-sized materials smoothly and forcefully. This results in consistent sewing performance at high speeds without irregular feed. The presser foot rises up as high as 15mm. This allows the operator to place/remove heavy materials such as urethane on/from the machine with ease. The machine is equipped as standard with a pneumatic auto-lifter. The vertical stroke (alternating vertical movement) of the presser foot and walking foot can be adjusted to 8mm at the maximum to accommodate the thickness of multi-layered portions of the material to be used. With its vertical-axis 1.6 fold hook, the frequency of bobbin thread replacement is reduced. This hook helps to upgrade efficiency and offers special advantages when using thick threads. PLC-1660L (thick-thread long-pitch type) With its large-sized thread take-up lever and wide-diameter pulley, the machine can handle threads as thick as #1 (207, Nm=8/3) and the stitch length can be set to 10mm at the maximum. PLC /XC-E500 PLC-1665 (with organized split needle bars) With its organized split needle bars, the machine produces wellbalanced beautiful topstitch-seams at the corners of materials. PLC-1660L PLC (with automatic thread trimmer) The machines is provided with a highly reliable thread trimmer that cuts thick thread without fail. The thread trimmer trims thread with consistency and absolutely. No need for additional adjustment even when thread number count is changed. Reverse-feed stitching operation can be started simply by pressing the one-touch-type reverse-feed button. Furthermore, if a suspended ruler is attached on the machine or a 3- dimensional sewing product is sewn, the button can be shifted upward to prevent interruption. PLC PLC-1660, 1660L, 1665, (eptember, 2003) 1/3

226 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Needle gauge (mm) Lift of the presser foot uto lifter Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Compressed air and air consumption afety mechanism obbin winder Post height ed size Weight of the machine head PLC-1660 PLC-1660L Thick-thread long-pitch type 2,000rpm titch length: 6mm or less (2,000rpm) titch length: 610mm (1,200rpm) 6mm (normal/reverse feed) 10mm (normal/reverse feed) 33.4mm 8, y hand: 10mm, uto: 15mm Provided as standard (pneumatic auto-lifter: K116) lide type lide type (large) 28mm Vertical-axis 1.6 fold-capacity hook (Nm140) Nm110Nm (Nm180) Nm140Nm200 (equivalent to #22, #18#23 ) (equivalent to #24, #22#25 ) #30#5, 46138, Nm=60/315/3 #8#1, 92207, Nm=30/38/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 0.5MPa (5kgf/cm 2 ), 0.3N /min Provided as standard uilt on the machine arm 161.7mm 517mm178mm 49kg Model name Max. sewing speed Max. stitch length Needle bar stroke Needle gauge (mm) Lift of the presser foot uto lifter Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Compressed air and air consumption afety mechanism obbin winder Post height ed size Weight of the machine head utomatic reverse feed function Power requirement PLC-1665 PLC With organized split needle bars With automatic thread trimmer 1,800rpm 2,000rpm 6mm (normal/reverse feed) 33.4mm 8, 10 6, 8, 10 y hand: 10mm, uto: 15mm Provided as standard (pneumatic auto-lifter: K116) lide type 28mm Vertical-axis 1.6 fold-capacity hook (Nm140) Nm110Nm160 (equivalent to #22, #18#23 ) #30#5, 46138, Nm=60/315/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 0.5MPa (5kgf/cm 2 ), 0.3N /min Provided as standard uilt on the machine arm 161.7mm 517mm178mm 48kg 51kg Provided as standard ingle-phase V, V 3-phase V, V PLC-1660, 1660L, 1665, (eptember, 2003) 2/3

227 WHEN YOU PLCE ORDER pecification Thick-thread long-pitch For thick-thread long-pitch type L, the needle gauge code is "D" and the presser foot code is "" only. L PLC1660 Presser foot Provide with center guide (needle gauge: 8mm) Feed dog Round hole(2.4) lot (2.4mm3.8mm) for type (standard) lot (3.5mm4.5mm) for L type (standard) C Needle gauge 8mm 10mm C D Throat plate For under-tape attachment (needle gauge: 8mm, tape width: 12mm) For under-tape attachment (needle gauge: 10mm, tape width: 14mm) If the throat plate for under-tape attachment is selected, specify needle gauge C for the C-type throat plate and needle gauge D for the D-type. C D Pneumatic auto-lifter Knee switch type (K116) Pedal switch type (K116) If pedal-switch type is specified use servomotor or electronic-stop motor (DC 24 V is required). Presser foot PLC1665 Feed dog Round hole(2.4) lot (2.4mm3.8mm) lot (3.5mm4.5mm) C Needle gauge 8mm 10mm C D Throat plate For under-tape attachment (needle gauge: 8mm, tape width: 12mm) For under-tape attachment (needle gauge: 10mm, tape width: 14mm) C D Pneumatic auto-lifter Knee switch type (K116) Pedal switch type (K116) If pedal-switch type is specified use servomotor or electronic-stop motor (DC 24 V is required). If the throat plate for under-tape attachment is selected, specify needle gauge C for the C-type throat plate and needle gauge D for the D-type. Feed dog Round hole(2.4) Pneumatic auto-lifter Knee switch type (K116) Pedal switch type (K116) PLC Needle gauge 6mm 8mm 10mm C D Throat plate For under-tape attachment (needle gauge: 8mm, tape width: 12mm) For under-tape attachment (needle gauge: 10mm, tape width: 14mm) C D Presser foot Provide with center guide (needle gauge: 8mm) If the throat plate for under-tape attachment is selected, specify needle gauge C for the C-type throat plate and needle gauge D for the D-type. PC box/operation panel for C Motor for C 18 C380 M For General Export For JU (L) For CE PC box ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V V JU: North merica and Central and outh merica. Operation panel Not provided Operation panel display language: English. Instruction manual comes in three different languages. Operation panel display language: English. Instruction manual comes in five different languages E500 E500C For General Export For JU (L) For CE Motor ingle-phase 3-phase ingle-phase 3-phase ingle-phase V V V V PLC-1660, 1660L, 1665, (eptember, 2003) 3/3

228 1-needle, High Post-bed, Unison-feed, Lockstitch Machine PLC-1690 (with vertical-axis 1.6 fold-capacity hook) PLC-1691 (with vertical-axis standard hook) The newly developed high post-bed machine has a post with a compactfinished top to support difficult sewing processes that conventional machines can't handle such as bottom sewing or gore sewing. The distance from the needle entry to the right end of the bed, the most important design feature of the machine, is as short as 2.8mm. The PLC-1690 comes in two different types: one with a "flat-surface type ()" and another with a "curved-surface type ()". You can select the type that best fits your needs. The PLC-1691 is provided with a vertical-axis standard hook and the top end of its post is minimized in size. With its outstanding sharp-curve sewing capability and operability, the machine is ready to sew diversely designed articles such as bags with narrow gores. The machine is designed to handle the basic processes required for the sewing of bags. With the new increase in the alternating vertical movement of the walking foot and presser foot to a maximum of 7mm, the machine can now handle sewing materials with many multi-layered portions. In addition, the lift of the presser foot is large* enough to allow the operator to easily set and remove sewing materials on the machines. PLC-1690: 15mm PLC-1690, PLC-1691: 10.5mm bobbin winder is mounted on the front surface of the machine arm. titch length can be adjusted with the stitch dial. In addition, the large-sized handwheel (175) can be easily turned by the operator when performing one-stitch sewing. PLC-1691 PECIFICTION Model name Max. sewing speed Max. stitch length 1,600rpm 6mm (normal/reverse feed) PLC-1690 PLC-1690 PLC-1691 Throat plate: flat-surface type Throat plate: curved-surface type Needle bar stroke 38mm 36mm Lift of the presser foot Thread take-up lternating vertical movement y hand: 10mm, y knee: 15mm y hand: 5.5mm, y knee: 10.5mm lide type 27mm Hook Vertical-axis 1.6 fold-capacity hook Vertical-axis standard hook Needle (at the time of delivery) Thread Lubrication Lubricating oil afety mechanism obbin wider (Nm120) Nm100Nm140 #30#8, 4692, Nm=60/330/3 y an oiler JUKI New Defrix Oil No. 1 (equivalent to IO VG7) Provided as standard uilt on the machine arm Post height 420mm 424.5mm Post position ed size Weight of the machine head Left 517mm178mm 57kg WHEN YOU PLCE ORDER PLC1690 PLC Throat plate Flat-surface type () Curved-surface type Pneumatic auto-lifter Not provided Knee switch type (K116) Pedal switch type (K116) If pedal-switch type is specified use servomotor or electronic-stop motor (DC 24 V is required). PLC-1690, 1691 (eptember, 2003) 1/1

229 Post-bed, ottom-feed Lockstitch Machine PLH-981 (1-needle) PLH-982 (2-needle) With JUKI's unique slide thread take-up lever, feed mechanism, and vertical-axis hook, the machine provides well-tensed, neatly finished seams every time. The stitch length can easily be adjusted with the stitch dial. Reverse-feed stitching is actuated by a simple press of the lever. The machine incorporates a large pulley that can be turned smoothly by hand. The face plate is designed to provide a clear view of the needle entry area and enable smooth thread feeding. Post-bed, Needle-feed Lockstitch Machine PLN-985 (1-needle) PLN-986 (2-needle) PLH-981 With a needle-feed mechanism that operates in synchronization with the bottom-feed, the machine produces beautiful seams free from slippage even when sewing slippery or hard-to-feed materials. PLH-981 PLN-986 PLN-986 PECIFICTION Model name Feed system Max. sewing speed Max. stitch length Needle bar stroke Needle gauge (mm) Lift of the presser foot Thread take-up Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil Post height ed size Weight of the machine head PLH-981 PLH-982 PLN-985 PLN needle 2-needle 1-needle 2-needle ottom-feed Needle-feed 2,500rpm 4mm (normal/reverse feed) 36mm 33.4mm 1.2, 1.6, 2.0, 2.4 (standard) 2.0, 2.4 (standard) y hand: 7mm, y knee: 10mm y hand: 6.5mm, y knee: 9mm lide type Vertical-axis hook DP5 (#18) #16#21 DP5 (#16) #16#21 #40#8, 3392, Nm=90/330/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) 178mm 179mm 517mm178mm 36kg 40kg 18 PLH-981, 982, PLN-985, 986 (eptember, 2003) 1/2

230 WHEN YOU PLCE ORDER 1-needle, ottom-feed 1-needle, Needle-feed PLH981 PLN985 2-needle, ottom-feed 2-needle, Needle-feed PLH982 PLN986 Needle gauge Needle gauge 1.2mm mm mm mm (standard) mm mm (standard) 24 GUGE TLE (2-NEEDLE TYPE) Model name Needle gauge Gauge set Needle clamp Needle guide Throat plate Feed dog PLH mm 1.6mm mm 2.4mm (standard) PLN mm mm (standard) PLH-981, 982, PLN-985, 986 (eptember, 2003) 2/2

231 1-needle, emi-long Flat-bed, Lockstitch Machine with Large huttle-hook for Extra Heavy Materials TU-273 (top & bottom-feed) TNU-243 (unison-feed) The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products. The machine comes with a large shuttle-hook. This type of shuttle-hook helps to reduce the frequency of bobbin thread replacement and is best suited for the sewing of extra heavy materials sewn with lower-count threads. The lifting range of the presser foot is as high as 20mm for smooth placement/removal of extra heavy materials. TU-273 The top-feed amount is adjustable within the range of 20% of the bottom-feed amount. TNU-243 Thanks to the TNU-243's unison-feed mechanism, the machine's higher feed efficiency guarantees the output of high-quality seams free from uneven material feed. TNU-243 PECIFICTION Model name Feed system Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot lternating vertical movement Thread take-up Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil obbin winder Distance from needle to machine arm ed size Weight of the machine head TU-273 TNU-243 Top & bottom-feed Unison-feed 800rpm 15mm (normal/reverse feed) 56mm y hand: 12mm, y pedal: 20mm 48mm Cam-type Large shuttle-hook 794 (Nm230) Nm130Nm280 or DY3 #21#28 #8#0, 92277, Nm=30/38/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) uilt on the machine arm 420mm 656mm253mm 65kg WHEN YOU PLCE ORDER TU273/ TNU243/ 19 uto-lifter Not provided Knee switch type (K72) Pedal switch type (K72) TU-273, TNU-243 (eptember, 2003) 1/1

232 Unison-feed, Long rm Lockstitch Machine with Vertical-axis Large Hook LG-158 (2-needle) LG (1-needle) With its 750mm wide space under the arm and a handwheel mounted at the middle of the arm, the machine is ideal for the sewing of heavy materials such as tents and sheets. large material can be sewn with spreading on the bed. With its unison-feed mechanism that ensures a smooth and steady feed of materials, the machine provides consistent seam quality with no material slippage. Eleven different kinds of needle gauges are prepared for the LG-158. The most suitable gauge for the current machine use can easily be selected. ince the machine incorporates a vertical-axis large hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency. The bobbin winder is installed at the front face of the arm for easy operation. The presser foot goes up as high as 21.5mm to ensure easy placement/removal of extra heavy materials. LG-158 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Needle gauge Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread afety mechanism obbin winder Lubrication Lubricating oil Distance from needle to machine arm ed size Weight of the machine head LG-158 LG needle 1-needle 1,500rpm 10mm (normal/reverse feed) 46.9mm 19.1mm (3/4") y pedal: 21.5mm ide type 619mm Vertical-axis large hook DD1 (#25) #20#5, 69138, Nm=40/320/3 Provided as standard uilt on the machine arm y an oiler JUKI New Oil No.1 (equivalent to IO VG7) 750mm 1,088mm230mm 108kg WHEN YOU PLCE ORDER LG158 LG1581 Needle gauge (mm) 6.4 (1/4") F 7.9 (5/16") H 9.5 (3/8") K 12.7 (1/2") L 15.9 (5/8") M 19.1 (3/4") N 25.4 (1") Q 31.8 (1-1/4") 38.1 (1-1/2") U 50.8 (2") (2-1/2") 3 EXCHNGELE GUGE PRT Needle gauge (mm) Needle clamp asm. Presser foot Walking foot Throat plate Feed dog lide plate Left lide plate Right 6.4 (1/4") F F F F F F F (5/16") 9.5 (3/8") 12.7 (1/2") H K L H K L H K L H K L H K L H K L H K L (5/8") M M M M M M M (3/4") N N N N N N N (1") Q Q Q Q Q Q Q (1-1/4") (1-1/2") U U U U U U U (2") (2-1/2") LG-158, (eptember, 2003) 1/1

233 1-needle, emi-long Cylinder-bed, Lockstitch Machine with Large huttle-hook for Extra Heavy Materials TH-411 (bottom-feed) TN-421 (needle-feed) TU-471 (top & bottom-feed) TC-441 (unison-feed) The machine has a wider free space under the machine arm to allow the operator to easily place and remove a large sewing products. In addition, the machine has outstanding capabilities in the sewing of sharp curves. The lifting range of the presser foot is up to 20mm for smooth placement/removal of extra heavy materials. The machine comes with a large shuttle-hook. This type of shuttle-hook helps to reduce the frequency of bobbin thread replacement and is best suited for the sewing of extra heavy materials sewn with lower-count threads. TC-441 FETURE Model name TH-411 TN-421 TU-471 TC-441 Feature The TH-411 can be modified to sew sharp curves by replacing the presser foot with roller presser. With its bottom-feed and feed-dog feed, the machine sews articles entirely free from uneven material feed. The top-feed amount is adjustable within the range of ± 30% of the bottom-feed. top & bottom-feed mechanism has been added to the machine's needle-feed system. This ensures a higher feed efficiency and the production of higher-quality seams without uneven material feed. pplication Decorative stitches on shoes, bag handles, etc. hoes, seat belts, etc. Gloves, tents, bags, bag handles, shirring, tape-attachment with a binder installed on the machine, etc. ags, pouches, shoes, seat belts, etc. PECIFICTION Model name Feed system Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil obbin winder Distance from needle to machine arm Cylinder-bed diameter Weight of the machine head TH-411 ottom-feed TN-421 TU-471 Needle-feed Top & bottom-feed 800rpm 11mm (normal/reverse feed) 56mm y hand: 12mm, y pedal: 20mm Cam-type 48mm Large capacity shuttle hook 794 (Nm230) Nm130Nm280 #8#0, 92277, Nm=30/38/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) uilt on the machine arm 420mm 81mm 56kg TC-441 Unison-feed WHEN YOU PLCE ORDER TH411 / TN421 / TU471/ TC441/ 19 Presser foot Roller presser R uto-lifter Not provided Knee switch type (K72) Pedal switch type (K72) TH-411, TN-421, TU-471, TC-441 (eptember, 2003) 1/1

234 uper-long Cylinder-bed, 1-needle, Lockstitch Machine with Large huttle-hook for Extra Heavy Materials TC-461 It is equipped with a free space under the arm as wide as 950mm, which means that the machine is capable of sewing large materials, long-sized materials and tubular sewn products with ease. The lift of the presser foot is high as 20mm. The lifting amount of the presser foot is sufficient to sew extra heavy materials. The machine comes with a large shuttle hook and large bobbin which have been exclusively designed for sewing extra heavy materials: these reduce the frequency of bobbin replacement, thereby leading to higher efficiency in sewing extra heavy materials using thick threads. When compared with the conventional 45K bobbin, the amount of thread wound around the newly developed large bobbin is increased by 50%. pplications Carrying bags, transportation equipment, sporting goods. TC-461 PECIFICTION Model name Max. sewing speed Max. stitch length Needle bar stroke Lift of the presser foot Reverse feed stitching method Thread take-up lternating vertical movement Hook Needle (at the time of delivery) Thread Lubrication Lubricating oil obbin wider Top-feed method Distance from needle to machine arm TC rpm 11mm (normal/reverse feed) 56mm y hand: 12mm, y pedal: 20mm y lever Cam type thread take-up 48mm Large capacity shuttle hook 794 (Nm230) Nm=130Nm280 #8#0, 92277, Nm=30/38/3 y an oiler JUKI New Defrix Oil No.1 (equivalent to IO VG7) uilt on the machine arm Interlocked with the bottom-feed mechanism 950mm WHEN YOU PLCE ORDER TC461/ uto-lifter Not provided Pedal switch type (K78) ubclass model: TC-461/K78 The conventional presser foot lifting pedal needs to be operated applying a considerably high pressure on it, which means that the operator gets tired of depressing the pedal. This machine, however, allows the operator to lightly lift the presser foot using the pedal. Thanks to the micro computer-controlled motor, the needle stop position can be controlled as desired. 19 TC-461 (eptember, 2003) 1/1